* [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. @ 2021-10-27 6:56 Tan, Ming 2021-11-04 5:21 ` [edk2-devel] " Attar, AbdulLateef (Abdul Lateef) ` (2 more replies) 0 siblings, 3 replies; 5+ messages in thread From: Tan, Ming @ 2021-10-27 6:56 UTC (permalink / raw) To: devel REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3708 The original code will cause FWTS V21.08.00 testing failed. spcr: SPCR PC-AT compatible IRQ 0xff is invalid spcr: SPCR PCI flags compatibility bit 0 is 0, expecting 1 for PCI device Now modify the SpcrAcpi for following: 1. Disable the support of PC-AT compatible IRQ support. Now only support IO-APIC interrupt type. 2. Set irq to 0. 3. Set the GSI to the value read from PCI device cfg space 0x3C. 4. Set PCI Flags to 1. Signed-off-by: Ming Tan <ming.tan@intel.com> --- V2: Fix a typo .../SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c index 86c40e90b8..7ad0c058c8 100644 --- a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c +++ b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c @@ -324,7 +324,9 @@ GetPciTypeInfo ( } gSpcrInfo.BaseAddress.Address = BaseAddress; - gSpcrInfo.Irq = (UINT8) Irq; + gSpcrInfo.InterruptType = EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_APIC; + gSpcrInfo.Irq = 0; + gSpcrInfo.GlobalSystemInterrupt = (UINT32)Irq; gSpcrInfo.PciDeviceId = DeviceId; gSpcrInfo.PciVendorId = VendorId; @@ -332,6 +334,7 @@ GetPciTypeInfo ( gSpcrInfo.PciDeviceNumber = (UINT8) Device; gSpcrInfo.PciFunctionNumber = (UINT8) Function; gSpcrInfo.PciSegment = (UINT8) SegNum; + gSpcrInfo.PciFlags = 1; Done: if (Resources != NULL) { -- 2.29.2.windows.3 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. 2021-10-27 6:56 [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting Tan, Ming @ 2021-11-04 5:21 ` Attar, AbdulLateef (Abdul Lateef) 2021-11-04 5:45 ` Tan, Ming 2021-12-02 0:48 ` Nate DeSimone 2021-12-02 0:56 ` Nate DeSimone 2 siblings, 1 reply; 5+ messages in thread From: Attar, AbdulLateef (Abdul Lateef) @ 2021-11-04 5:21 UTC (permalink / raw) To: devel@edk2.groups.io, ming.tan@intel.com [Public] Code changes looks good. Is fwts passing now? I think FWTS has wrong test case. It expects Global system interrupt number to be zero for APIC interrupt type, which is wrong. In my opinion it should check for Global system interrupt number for zero in case of PC-AT interrupt type. Thanks AbduL -----Original Message----- From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Tan, Ming via groups.io Sent: Wednesday, October 27, 2021 12:27 PM To: devel@edk2.groups.io Subject: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. [CAUTION: External Email] REF: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.tianocore.org%2Fshow_bug.cgi%3Fid%3D3708&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=rvzXQBpKAzzWr0VGZZoCJyVcJBhOvzvlbdrxzEe1KQk%3D&reserved=0 The original code will cause FWTS V21.08.00 testing failed. spcr: SPCR PC-AT compatible IRQ 0xff is invalid spcr: SPCR PCI flags compatibility bit 0 is 0, expecting 1 for PCI device Now modify the SpcrAcpi for following: 1. Disable the support of PC-AT compatible IRQ support. Now only support IO-APIC interrupt type. 2. Set irq to 0. 3. Set the GSI to the value read from PCI device cfg space 0x3C. 4. Set PCI Flags to 1. Signed-off-by: Ming Tan <ming.tan@intel.com> --- V2: Fix a typo .../SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c index 86c40e90b8..7ad0c058c8 100644 --- a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c +++ b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/Spcr +++ Acpi.c @@ -324,7 +324,9 @@ GetPciTypeInfo ( } gSpcrInfo.BaseAddress.Address = BaseAddress; - gSpcrInfo.Irq = (UINT8) Irq; + gSpcrInfo.InterruptType = + EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_APIC; + gSpcrInfo.Irq = 0; + gSpcrInfo.GlobalSystemInterrupt = (UINT32)Irq; gSpcrInfo.PciDeviceId = DeviceId; gSpcrInfo.PciVendorId = VendorId; @@ -332,6 +334,7 @@ GetPciTypeInfo ( gSpcrInfo.PciDeviceNumber = (UINT8) Device; gSpcrInfo.PciFunctionNumber = (UINT8) Function; gSpcrInfo.PciSegment = (UINT8) SegNum; + gSpcrInfo.PciFlags = 1; Done: if (Resources != NULL) { -- 2.29.2.windows.3 -=-=-=-=-=-= Groups.io Links: You receive all messages sent to this group. View/Reply Online (#82732): https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F82732&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=m6rywrR9G355hZ1IHgi5XCtuYpK52Fu19aQaGZFBtbA%3D&reserved=0 Mute This Topic: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F86622293%2F6129197&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=GrAh49Txcr%2Bd9xAwq1l%2FFo6sGqZZN%2BcXX2Q1TT3ss44%3D&reserved=0 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=CYm4d5gMEDoei40a4lXbB6eEB%2B81It7wXuCu6maMZ5M%3D&reserved=0 [abdattar@amd.com] -=-=-=-=-=-= ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. 2021-11-04 5:21 ` [edk2-devel] " Attar, AbdulLateef (Abdul Lateef) @ 2021-11-04 5:45 ` Tan, Ming 0 siblings, 0 replies; 5+ messages in thread From: Tan, Ming @ 2021-11-04 5:45 UTC (permalink / raw) To: Attar, AbdulLateef (Abdul Lateef), devel@edk2.groups.io Abdul: The following are the testing result using FWTS 21.08.00: spcr: SPCR Serial Port Console Redirection Table test. -------------------------------------------------------------------------------- Test 1 of 3: SPCR Serial Port Console Redirection Table test. Serial Interface: 16550 compatible Baud Rate: 115200 Terminal Type: VT100 PASSED: Test 1, No issues found in SPCR table. Test 2 of 3: SPCR Revision Test. Test 3 of 3: SPCR GSIV Interrupt Test. ================================================================================ 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ The following are currently code without my patch using FWTS 21.08.00: spcr: SPCR Serial Port Console Redirection Table test. -------------------------------------------------------------------------------- Test 1 of 3: SPCR Serial Port Console Redirection Table test. Serial Interface: 16550 compatible FAILED [HIGH] SPCRIllegalIRQ: Test 1, SPCR PC-AT compatible IRQ 0xff is invalid Baud Rate: 115200 Terminal Type: VT100 FAILED [HIGH] SPCRPciFlagsBit0: Test 1, SPCR PCI flags compatibility bit 0 is 0, expecting 1 for PCI device Test 2 of 3: SPCR Revision Test. Test 3 of 3: SPCR GSIV Interrupt Test. ================================================================================ 0 passed, 2 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ BR/Tan Ming. -----Original Message----- From: Attar, AbdulLateef (Abdul Lateef) <AbdulLateef.Attar@amd.com> Sent: Thursday, November 4, 2021 1:22 PM To: devel@edk2.groups.io; Tan, Ming <ming.tan@intel.com> Subject: RE: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. [Public] Code changes looks good. Is fwts passing now? I think FWTS has wrong test case. It expects Global system interrupt number to be zero for APIC interrupt type, which is wrong. In my opinion it should check for Global system interrupt number for zero in case of PC-AT interrupt type. Thanks AbduL -----Original Message----- From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Tan, Ming via groups.io Sent: Wednesday, October 27, 2021 12:27 PM To: devel@edk2.groups.io Subject: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. [CAUTION: External Email] REF: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.tianocore.org%2Fshow_bug.cgi%3Fid%3D3708&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=rvzXQBpKAzzWr0VGZZoCJyVcJBhOvzvlbdrxzEe1KQk%3D&reserved=0 The original code will cause FWTS V21.08.00 testing failed. spcr: SPCR PC-AT compatible IRQ 0xff is invalid spcr: SPCR PCI flags compatibility bit 0 is 0, expecting 1 for PCI device Now modify the SpcrAcpi for following: 1. Disable the support of PC-AT compatible IRQ support. Now only support IO-APIC interrupt type. 2. Set irq to 0. 3. Set the GSI to the value read from PCI device cfg space 0x3C. 4. Set PCI Flags to 1. Signed-off-by: Ming Tan <ming.tan@intel.com> --- V2: Fix a typo .../SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c index 86c40e90b8..7ad0c058c8 100644 --- a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c +++ b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/Spcr +++ Acpi.c @@ -324,7 +324,9 @@ GetPciTypeInfo ( } gSpcrInfo.BaseAddress.Address = BaseAddress; - gSpcrInfo.Irq = (UINT8) Irq; + gSpcrInfo.InterruptType = + EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_APIC; + gSpcrInfo.Irq = 0; + gSpcrInfo.GlobalSystemInterrupt = (UINT32)Irq; gSpcrInfo.PciDeviceId = DeviceId; gSpcrInfo.PciVendorId = VendorId; @@ -332,6 +334,7 @@ GetPciTypeInfo ( gSpcrInfo.PciDeviceNumber = (UINT8) Device; gSpcrInfo.PciFunctionNumber = (UINT8) Function; gSpcrInfo.PciSegment = (UINT8) SegNum; + gSpcrInfo.PciFlags = 1; Done: if (Resources != NULL) { -- 2.29.2.windows.3 -=-=-=-=-=-= Groups.io Links: You receive all messages sent to this group. View/Reply Online (#82732): https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F82732&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=m6rywrR9G355hZ1IHgi5XCtuYpK52Fu19aQaGZFBtbA%3D&reserved=0 Mute This Topic: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F86622293%2F6129197&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=GrAh49Txcr%2Bd9xAwq1l%2FFo6sGqZZN%2BcXX2Q1TT3ss44%3D&reserved=0 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7CAbdulLateef.Attar%40amd.com%7Cb53806998fbe4d20cfc008d99917110f%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637709147065715846%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=CYm4d5gMEDoei40a4lXbB6eEB%2B81It7wXuCu6maMZ5M%3D&reserved=0 [abdattar@amd.com] -=-=-=-=-=-= ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. 2021-10-27 6:56 [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting Tan, Ming 2021-11-04 5:21 ` [edk2-devel] " Attar, AbdulLateef (Abdul Lateef) @ 2021-12-02 0:48 ` Nate DeSimone 2021-12-02 0:56 ` Nate DeSimone 2 siblings, 0 replies; 5+ messages in thread From: Nate DeSimone @ 2021-12-02 0:48 UTC (permalink / raw) To: devel@edk2.groups.io, Tan, Ming Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com> -----Original Message----- From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Tan, Ming Sent: Tuesday, October 26, 2021 11:57 PM To: devel@edk2.groups.io Subject: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3708 The original code will cause FWTS V21.08.00 testing failed. spcr: SPCR PC-AT compatible IRQ 0xff is invalid spcr: SPCR PCI flags compatibility bit 0 is 0, expecting 1 for PCI device Now modify the SpcrAcpi for following: 1. Disable the support of PC-AT compatible IRQ support. Now only support IO-APIC interrupt type. 2. Set irq to 0. 3. Set the GSI to the value read from PCI device cfg space 0x3C. 4. Set PCI Flags to 1. Signed-off-by: Ming Tan <ming.tan@intel.com> --- V2: Fix a typo .../SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c index 86c40e90b8..7ad0c058c8 100644 --- a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c +++ b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/Spcr +++ Acpi.c @@ -324,7 +324,9 @@ GetPciTypeInfo ( } gSpcrInfo.BaseAddress.Address = BaseAddress;- gSpcrInfo.Irq = (UINT8) Irq;+ gSpcrInfo.InterruptType = EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_APIC;+ gSpcrInfo.Irq = 0;+ gSpcrInfo.GlobalSystemInterrupt = (UINT32)Irq; gSpcrInfo.PciDeviceId = DeviceId; gSpcrInfo.PciVendorId = VendorId;@@ -332,6 +334,7 @@ GetPciTypeInfo ( gSpcrInfo.PciDeviceNumber = (UINT8) Device; gSpcrInfo.PciFunctionNumber = (UINT8) Function; gSpcrInfo.PciSegment = (UINT8) SegNum;+ gSpcrInfo.PciFlags = 1; Done: if (Resources != NULL) {-- 2.29.2.windows.3 -=-=-=-=-=-= Groups.io Links: You receive all messages sent to this group. View/Reply Online (#82732): https://edk2.groups.io/g/devel/message/82732 Mute This Topic: https://groups.io/mt/86622293/1767664 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [nathaniel.l.desimone@intel.com] -=-=-=-=-=-= ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. 2021-10-27 6:56 [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting Tan, Ming 2021-11-04 5:21 ` [edk2-devel] " Attar, AbdulLateef (Abdul Lateef) 2021-12-02 0:48 ` Nate DeSimone @ 2021-12-02 0:56 ` Nate DeSimone 2 siblings, 0 replies; 5+ messages in thread From: Nate DeSimone @ 2021-12-02 0:56 UTC (permalink / raw) To: devel@edk2.groups.io, Tan, Ming Pushed: https://github.com/tianocore/edk2-platforms/commit/e9149e2 -----Original Message----- From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Tan, Ming Sent: Tuesday, October 26, 2021 11:57 PM To: devel@edk2.groups.io Subject: [edk2-devel] [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3708 The original code will cause FWTS V21.08.00 testing failed. spcr: SPCR PC-AT compatible IRQ 0xff is invalid spcr: SPCR PCI flags compatibility bit 0 is 0, expecting 1 for PCI device Now modify the SpcrAcpi for following: 1. Disable the support of PC-AT compatible IRQ support. Now only support IO-APIC interrupt type. 2. Set irq to 0. 3. Set the GSI to the value read from PCI device cfg space 0x3C. 4. Set PCI Flags to 1. Signed-off-by: Ming Tan <ming.tan@intel.com> --- V2: Fix a typo .../SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c index 86c40e90b8..7ad0c058c8 100644 --- a/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/SpcrAcpi.c +++ b/Features/Intel/OutOfBandManagement/SpcrFeaturePkg/SpcrAcpiDxe/Spcr +++ Acpi.c @@ -324,7 +324,9 @@ GetPciTypeInfo ( } gSpcrInfo.BaseAddress.Address = BaseAddress;- gSpcrInfo.Irq = (UINT8) Irq;+ gSpcrInfo.InterruptType = EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_APIC;+ gSpcrInfo.Irq = 0;+ gSpcrInfo.GlobalSystemInterrupt = (UINT32)Irq; gSpcrInfo.PciDeviceId = DeviceId; gSpcrInfo.PciVendorId = VendorId;@@ -332,6 +334,7 @@ GetPciTypeInfo ( gSpcrInfo.PciDeviceNumber = (UINT8) Device; gSpcrInfo.PciFunctionNumber = (UINT8) Function; gSpcrInfo.PciSegment = (UINT8) SegNum;+ gSpcrInfo.PciFlags = 1; Done: if (Resources != NULL) {-- 2.29.2.windows.3 -=-=-=-=-=-= Groups.io Links: You receive all messages sent to this group. View/Reply Online (#82732): https://edk2.groups.io/g/devel/message/82732 Mute This Topic: https://groups.io/mt/86622293/1767664 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [nathaniel.l.desimone@intel.com] -=-=-=-=-=-= ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-12-02 0:56 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-10-27 6:56 [PATCH v2] SpcrFeaturePkg: Modify PCI device interrupt setting Tan, Ming 2021-11-04 5:21 ` [edk2-devel] " Attar, AbdulLateef (Abdul Lateef) 2021-11-04 5:45 ` Tan, Ming 2021-12-02 0:48 ` Nate DeSimone 2021-12-02 0:56 ` Nate DeSimone
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox