From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Yao, Jiewen" <jiewen.yao@intel.com>,
"xiewenyi (A)" <xiewenyi2@huawei.com>,
"Wang, Jian J" <jian.j.wang@intel.com>,
"Lu, Xiaoyu1" <xiaoyu1.lu@intel.com>,
"Jiang, Guomin" <guomin.jiang@intel.com>
Cc: "songdongkuang@huawei.com" <songdongkuang@huawei.com>,
"yizihong@huawei.com" <yizihong@huawei.com>
Subject: Re: [edk2-devel] [PATCH EDK2 v1 1/1] CryptoPkg/BaseCryptLib:time overflow
Date: Thu, 1 Dec 2022 14:23:05 +0000 [thread overview]
Message-ID: <MW4PR11MB58720A89841D104E27793C818C149@MW4PR11MB5872.namprd11.prod.outlook.com> (raw)
In-Reply-To: <172CAED90E086CFF.1705@groups.io>
Hey
The patch caused CI failure - https://github.com/tianocore/edk2/pull/3691
Please always run Tiano CI before submit the patch.
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Yao,
> Jiewen
> Sent: Thursday, December 1, 2022 9:37 PM
> To: xiewenyi (A) <xiewenyi2@huawei.com>; devel@edk2.groups.io; Wang,
> Jian J <jian.j.wang@intel.com>; Lu, Xiaoyu1 <xiaoyu1.lu@intel.com>; Jiang,
> Guomin <guomin.jiang@intel.com>
> Cc: songdongkuang@huawei.com; yizihong@huawei.com
> Subject: Re: [edk2-devel] [PATCH EDK2 v1 1/1]
> CryptoPkg/BaseCryptLib:time overflow
>
> Thank you!
>
> Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
>
> > -----Original Message-----
> > From: xiewenyi (A) <xiewenyi2@huawei.com>
> > Sent: Thursday, December 1, 2022 8:34 PM
> > To: Yao, Jiewen <jiewen.yao@intel.com>; devel@edk2.groups.io; Wang,
> Jian
> > J <jian.j.wang@intel.com>; Lu, Xiaoyu1 <xiaoyu1.lu@intel.com>; Jiang,
> > Guomin <guomin.jiang@intel.com>
> > Cc: songdongkuang@huawei.com; yizihong@huawei.com
> > Subject: Re: [edk2-devel] [PATCH EDK2 v1 1/1]
> > CryptoPkg/BaseCryptLib:time overflow
> >
> >
> >
> > On 2022/12/1 16:34, Yao, Jiewen wrote:
> > > Thank you!
> > >
> > > Would you please share what test you have run for this patch, such as
> > UEFI secure boot? HTTPS boot?
> > >
> > Hi, Jiewen
> >
> > We found this problem when importing certification and verifying the
> > expiration date(the verifying code is customed), so we only using a X64
> > board to do the test like below:
> > 1. Entering setup page
> > 2. Setting system time to 2038.9.27 19:23
> > 3. Importing a X509 certification, which is valid from 2022.9.27 1:59 to
> > 2023.9.27 1:59
> >
> > before merging the patch
> > the certification can be imported successfully.
> >
> > after merging the patch
> > importing failed.
> > >
> > >
> > >> -----Original Message-----
> > >> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > >> wenyi,xie via groups.io
> > >> Sent: Friday, November 25, 2022 5:12 PM
> > >> To: devel@edk2.groups.io; Yao, Jiewen <jiewen.yao@intel.com>; Wang,
> > Jian
> > >> J <jian.j.wang@intel.com>; Lu, Xiaoyu1 <xiaoyu1.lu@intel.com>; Jiang,
> > >> Guomin <guomin.jiang@intel.com>
> > >> Cc: songdongkuang@huawei.com; xiewenyi2@huawei.com;
> > >> yizihong@huawei.com
> > >> Subject: [edk2-devel] [PATCH EDK2 v1 1/1]
> CryptoPkg/BaseCryptLib:time
> > >> overflow
> > >>
> > >> From: Zihong Yi <yizihong@huawei.com>
> > >>
> > >> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4167
> > >>
> > >> In CrtLibSupport.h, time_t is defined as INT32, and its maximum value
> > >> is 2147483647. That is, the corresponding maximum timestamp is
> > >> 2038-01-19 11:14:07. Therefore, overflow occurs when the test time
> > >> exceeds 2038-01-19 11:14:07. So change the type of time_t to INT64
> > and
> > >> also change the type of variables in function gmtime which calculated
> > >> with time_t.
> > >>
> > >> Cc: Jiewen Yao <jiewen.yao@intel.com>
> > >> Cc: Jian J Wang <jian.j.wang@intel.com>
> > >> Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
> > >> Cc: Guomin Jiang <guomin.jiang@intel.com>
> > >> Signed-off-by: Zihong Yi <yizihong@huawei.com>
> > >> ---
> > >> CryptoPkg/Library/Include/CrtLibSupport.h | 2 +-
> > >> CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c | 51
> > >> ++++++++++++++------
> > >> 2 files changed, 38 insertions(+), 15 deletions(-)
> > >>
> > >> diff --git a/CryptoPkg/Library/Include/CrtLibSupport.h
> > >> b/CryptoPkg/Library/Include/CrtLibSupport.h
> > >> index 5072c343da57..94b0e6b6014f 100644
> > >> --- a/CryptoPkg/Library/Include/CrtLibSupport.h
> > >> +++ b/CryptoPkg/Library/Include/CrtLibSupport.h
> > >> @@ -109,7 +109,7 @@ typedef UINTN off_t;
> > >> typedef UINTN u_int;
> > >> typedef INTN ptrdiff_t;
> > >> typedef INTN ssize_t;
> > >> -typedef INT32 time_t;
> > >> +typedef INT64 time_t;
> > >> typedef UINT8 __uint8_t;
> > >> typedef UINT8 sa_family_t;
> > >> typedef UINT8 u_char;
> > >> diff --git a/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
> > >> b/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
> > >> index bf8a5325817f..3ed64375d0ff 100644
> > >> --- a/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
> > >> +++ b/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
> > >> @@ -15,7 +15,6 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > >> // -- Time Management Routines --
> > >> //
> > >>
> > >> -#define IsLeap(y) (((y) % 4) == 0 && (((y) % 100) != 0 || ((y) % 400) ==
> > 0))
> > >> #define SECSPERMIN (60)
> > >> #define SECSPERHOUR (60 * 60)
> > >> #define SECSPERDAY (24 * SECSPERHOUR)
> > >> @@ -60,6 +59,26 @@ UINTN CumulativeDays[2][14] = {
> > >> }
> > >> };
> > >>
> > >> +/* Check the year is leap or not. */
> > >> +// BOOLEAN IsLeap(
> > >> +// INTN timer
> > >> +// )
> > >> +BOOLEAN
> > >> +IsLeap (
> > >> + time_t timer
> > >> + )
> > >> +{
> > >> + INT64 Remainder1;
> > >> + INT64 Remainder2;
> > >> + INT64 Remainder3;
> > >> +
> > >> + DivS64x64Remainder (timer, 4, &Remainder1);
> > >> + DivS64x64Remainder (timer, 100, &Remainder2);
> > >> + DivS64x64Remainder (timer, 400, &Remainder3);
> > >> +
> > >> + return (Remainder1 == 0 && (Remainder2 != 0 || Remainder3 ==
> 0));
> > >> +}
> > >> +
> > >> /* Get the system time as seconds elapsed since midnight, January 1,
> > 1970.
> > >> */
> > >> // INTN time(
> > >> // INTN *timer
> > >> @@ -117,12 +136,13 @@ gmtime (
> > >> )
> > >> {
> > >> struct tm *GmTime;
> > >> - UINT16 DayNo;
> > >> - UINT32 DayRemainder;
> > >> + UINT64 DayNo;
> > >> + UINT64 DayRemainder;
> > >> time_t Year;
> > >> time_t YearNo;
> > >> - UINT16 TotalDays;
> > >> - UINT16 MonthNo;
> > >> + UINT32 TotalDays;
> > >> + UINT32 MonthNo;
> > >> + INT64 Remainder;
> > >>
> > >> if (timer == NULL) {
> > >> return NULL;
> > >> @@ -135,18 +155,21 @@ gmtime (
> > >>
> > >> ZeroMem ((VOID *)GmTime, (UINTN)sizeof (struct tm));
> > >>
> > >> - DayNo = (UINT16)(*timer / SECSPERDAY);
> > >> - DayRemainder = (UINT32)(*timer % SECSPERDAY);
> > >> + DayNo = (UINT64)DivS64x64Remainder (*timer, SECSPERDAY,
> > >> &Remainder);
> > >> + DayRemainder = (UINT64)Remainder;
> > >>
> > >> - GmTime->tm_sec = (int)(DayRemainder % SECSPERMIN);
> > >> - GmTime->tm_min = (int)((DayRemainder % SECSPERHOUR) /
> > >> SECSPERMIN);
> > >> - GmTime->tm_hour = (int)(DayRemainder / SECSPERHOUR);
> > >> - GmTime->tm_wday = (int)((DayNo + 4) % 7);
> > >> + DivS64x64Remainder (DayRemainder, SECSPERMIN, &Remainder);
> > >> + GmTime->tm_sec = (int)Remainder;
> > >> + DivS64x64Remainder (DayRemainder, SECSPERHOUR, &Remainder);
> > >> + GmTime->tm_min = (int)DivS64x64Remainder (Remainder,
> > SECSPERMIN,
> > >> NULL);
> > >> + GmTime->tm_hour = (int)DivS64x64Remainder (DayRemainder,
> > >> SECSPERHOUR, NULL);
> > >> + DivS64x64Remainder ((DayNo + 4), 7, &Remainder);
> > >> + GmTime->tm_wday = (int)Remainder;
> > >>
> > >> for (Year = 1970, YearNo = 0; DayNo > 0; Year++) {
> > >> - TotalDays = (UINT16)(IsLeap (Year) ? 366 : 365);
> > >> + TotalDays = (UINT32)(IsLeap (Year) ? 366 : 365);
> > >> if (DayNo >= TotalDays) {
> > >> - DayNo = (UINT16)(DayNo - TotalDays);
> > >> + DayNo = (UINT64)(DayNo - TotalDays);
> > >> YearNo++;
> > >> } else {
> > >> break;
> > >> @@ -158,7 +181,7 @@ gmtime (
> > >>
> > >> for (MonthNo = 12; MonthNo > 1; MonthNo--) {
> > >> if (DayNo >= CumulativeDays[IsLeap (Year)][MonthNo]) {
> > >> - DayNo = (UINT16)(DayNo - (UINT16)(CumulativeDays[IsLeap
> > >> (Year)][MonthNo]));
> > >> + DayNo = (UINT64)(DayNo - (UINT32)(CumulativeDays[IsLeap
> > >> (Year)][MonthNo]));
> > >> break;
> > >> }
> > >> }
> > >> --
> > >> 2.20.1.windows.1
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > > .
> > >
>
>
>
>
prev parent reply other threads:[~2022-12-01 14:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-25 9:11 [PATCH EDK2 v1 0/1] CryptoPkg/BaseCryptLib:time overflow wenyi,xie
2022-11-25 9:11 ` [PATCH EDK2 v1 1/1] " wenyi,xie
2022-12-01 8:34 ` [edk2-devel] " Yao, Jiewen
2022-12-01 12:34 ` wenyi,xie
2022-12-01 13:36 ` Yao, Jiewen
[not found] ` <172CAED90E086CFF.1705@groups.io>
2022-12-01 14:23 ` Yao, Jiewen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MW4PR11MB58720A89841D104E27793C818C149@MW4PR11MB5872.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox