Re: [edk2-devel] [PATCH v5 1/1] CryptoPkg: Add new hash algorithm ParallelHash256HashAll in BaseCryptLib.

["Yao, Jiewen" <jiewen.yao@intel.com>]

Sounds good. Thanks for the update.

> -----Original Message-----
> From: Li, Zhihao <zhihao.li@intel.com>
> Sent: Thursday, March 17, 2022 10:43 AM
> To: Yao, Jiewen <jiewen.yao@intel.com>; devel@edk2.groups.io
> Cc: Wang, Jian J <jian.j.wang@intel.com>; Lu, Xiaoyu1 <xiaoyu1.lu@intel.com>;
> Jiang, Guomin <guomin.jiang@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>
> Subject: RE: [edk2-devel] [PATCH v5 1/1] CryptoPkg: Add new hash algorithm
> ParallelHash256HashAll in BaseCryptLib.
> 
> Will send patch_v6 with following update soon.
> 1. adjust the position of new field in the data structure.
> 2.update the version of data structure if it existing.
> 3.With the usability test, the CrytoLibOnProtocol version code can be used
> normally as static version.
> 
> Best Regard
> Zhihao
> 
> 
> -----Original Message-----
> From: Yao, Jiewen <jiewen.yao@intel.com>
> Sent: Monday, March 14, 2022 1:50 PM
> To: devel@edk2.groups.io; Li, Zhihao <zhihao.li@intel.com>
> Cc: Wang, Jian J <jian.j.wang@intel.com>; Lu, Xiaoyu1 <xiaoyu1.lu@intel.com>;
> Jiang, Guomin <guomin.jiang@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>
> Subject: RE: [edk2-devel] [PATCH v5 1/1] CryptoPkg: Add new hash algorithm
> ParallelHash256HashAll in BaseCryptLib.
> 
> Thanks. It is close to final version, but there are some compatibility issue need to
> be address.
> 
> 1) Whenever you add a new field in the data structure, please add it at the end.
> Don't add them in the middle.
> E.g. PCD_CRYPTO_SERVICE_FAMILY_ENABLE, _EDKII_CRYPTO_PROTOCOL
> 
> 2) Whenever you add a new field for a data structure, please remember to
> increase the version.
> E.g. EDKII_CRYPTO_VERSION
> 
> 
> 3) Please clarify if you have tested the CrytoLibOnProtocol version code.
> 
> Thank you
> Yao Jiewen
> 
> 
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Li, Zhihao
> > Sent: Wednesday, March 9, 2022 4:44 PM
> > To: devel@edk2.groups.io
> > Cc: Yao, Jiewen <jiewen.yao@intel.com>; Wang, Jian J
> <jian.j.wang@intel.com>;
> > Lu, Xiaoyu1 <xiaoyu1.lu@intel.com>; Jiang, Guomin
> <guomin.jiang@intel.com>;
> > Fu, Siyuan <siyuan.fu@intel.com>
> > Subject: [edk2-devel] [PATCH v5 1/1] CryptoPkg: Add new hash algorithm
> > ParallelHash256HashAll in BaseCryptLib.
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3596
> >
> > Parallel hash function ParallelHash256HashAll, as defined in NIST's
> > Special Publication 800-185, published December 2016. It utilizes
> > multi-process to calculate the digest.
> >
> > Some modifications to pass CI test.
> >
> > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > Cc: Jian J Wang <jian.j.wang@intel.com>
> > Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
> > Cc: Guomin Jiang <guomin.jiang@intel.com>
> > Cc: Siyuan Fu <siyuan.fu@intel.com>
> > Cc: Zhihao Li <zhihao.li@intel.com>
> >
> > Signed-off-by: Zhihao Li <zhihao.li@intel.com>
> > ---
> >  CryptoPkg/Driver/Crypto.c                                             |  36 ++-
> >  CryptoPkg/Library/BaseCryptLib/Hash/CryptCShake256.c                  | 282
> > ++++++++++++++++++++
> >  CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.c               | 278
> > +++++++++++++++++++
> >  CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHashNull.c           |  40 +++
> >  CryptoPkg/Library/BaseCryptLib/Hash/CryptSha3.c                       | 166
> > ++++++++++++
> >  CryptoPkg/Library/BaseCryptLib/Hash/CryptXkcp.c                       | 107
> ++++++++
> >  CryptoPkg/Library/BaseCryptLibNull/Hash/CryptParallelHashNull.c       |  40
> +++
> >  CryptoPkg/Library/BaseCryptLibOnProtocolPpi/CryptLib.c                |  34 ++-
> >  CryptoPkg/Test/UnitTest/Library/BaseCryptLib/ParallelhashTests.c      | 145
> > ++++++++++
> >  CryptoPkg/CryptoPkg.ci.yaml                                           |   4 +-
> >  CryptoPkg/Include/Library/BaseCryptLib.h                              |  31 ++-
> >  CryptoPkg/Include/Pcd/PcdCryptoServiceFamilyEnable.h                  |   8 +-
> >  CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf                       |   3 +-
> >  CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.h               | 201
> > ++++++++++++++
> >  CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf                        |   3 +-
> >  CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf                    |   3 +-
> >  CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf                        |   8 +-
> >  CryptoPkg/Library/BaseCryptLibNull/BaseCryptLibNull.inf               |   3 +-
> >  CryptoPkg/Library/Include/CrtLibSupport.h                             |   3 +-
> >  CryptoPkg/Private/Protocol/Crypto.h                                   |  31 +++
> >  CryptoPkg/Test/CryptoPkgHostUnitTest.dsc                              |   3 +
> >  CryptoPkg/Test/UnitTest/Library/BaseCryptLib/TestBaseCryptLibHost.inf |   4
> +
> >  22 files changed, 1422 insertions(+), 11 deletions(-)
> >
> > diff --git a/CryptoPkg/Driver/Crypto.c b/CryptoPkg/Driver/Crypto.c
> > index d5d6aa8e5820..35312e0818a0 100644
> > --- a/CryptoPkg/Driver/Crypto.c
> > +++ b/CryptoPkg/Driver/Crypto.c
> > @@ -3,7 +3,7 @@
> >    from BaseCryptLib and TlsLib.
> >
> >
> >
> >    Copyright (C) Microsoft Corporation. All rights reserved.
> >
> > -  Copyright (c) 2019 - 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +  Copyright (c) 2019 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >    SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >
> >
> >  **/
> >
> > @@ -1314,6 +1314,38 @@ CryptoServiceSha512HashAll (
> >    return CALL_BASECRYPTLIB (Sha512.Services.HashAll, Sha512HashAll, (Data,
> > DataSize, HashValue), FALSE);
> >
> >  }
> >
> >
> >
> > +/**
> >
> > +  Parallel hash function ParallelHash256, as defined in NIST's Special
> Publication
> > 800-185,
> >
> > +  published December 2016.
> >
> > +
> >
> > +  @param[in]   Input            Pointer to the input message (X).
> >
> > +  @param[in]   InputByteLen     The number(>0) of input bytes provided for the
> > input data.
> >
> > +  @param[in]   BlockSize        The size of each block (B).
> >
> > +  @param[out]  Output           Pointer to the output buffer.
> >
> > +  @param[in]   OutputByteLen    The desired number of output bytes (L).
> >
> > +  @param[in]   Customization    Pointer to the customization string (S).
> >
> > +  @param[in]   CustomByteLen    The length of the customization string in
> bytes.
> >
> > +
> >
> > +  @retval TRUE   ParallelHash256 digest computation succeeded.
> >
> > +  @retval FALSE  ParallelHash256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +CryptoServiceParallelHash256HashAll (
> >
> > +  IN CONST VOID   *Input,
> >
> > +  IN       UINTN  InputByteLen,
> >
> > +  IN       UINTN  BlockSize,
> >
> > +  OUT      VOID   *Output,
> >
> > +  IN       UINTN  OutputByteLen,
> >
> > +  IN CONST VOID   *Customization,
> >
> > +  IN       UINTN  CustomByteLen
> >
> > +  )
> >
> > +{
> >
> > +  return CALL_BASECRYPTLIB (ParallelHash.Services.HashAll,
> > ParallelHash256HashAll, (Input, InputByteLen, BlockSize, Output,
> OutputByteLen,
> > Customization, CustomByteLen), FALSE);
> >
> > +}
> >
> > +
> >
> >  /**
> >
> >    Retrieves the size, in bytes, of the context buffer required for SM3 hash
> > operations.
> >
> >
> >
> > @@ -4590,6 +4622,8 @@ const EDKII_CRYPTO_PROTOCOL  mEdkiiCrypto = {
> >    CryptoServiceSha512Update,
> >
> >    CryptoServiceSha512Final,
> >
> >    CryptoServiceSha512HashAll,
> >
> > +  /// Parallel hash
> >
> > +  CryptoServiceParallelHash256HashAll,
> >
> >    /// X509
> >
> >    CryptoServiceX509GetSubjectName,
> >
> >    CryptoServiceX509GetCommonName,
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/Hash/CryptCShake256.c
> > b/CryptoPkg/Library/BaseCryptLib/Hash/CryptCShake256.c
> > new file mode 100644
> > index 000000000000..96e3c8eb02e1
> > --- /dev/null
> > +++ b/CryptoPkg/Library/BaseCryptLib/Hash/CryptCShake256.c
> > @@ -0,0 +1,282 @@
> > +/** @file
> >
> > +  cSHAKE-256 Digest Wrapper Implementations.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +**/
> >
> > +
> >
> > +#include "CryptParallelHash.h"
> >
> > +
> >
> > +#define  CSHAKE256_SECURITY_STRENGTH  256
> >
> > +#define  CSHAKE256_RATE_IN_BYTES      136
> >
> > +
> >
> > +const CHAR8  mZeroPadding[CSHAKE256_RATE_IN_BYTES] = { 0 };
> >
> > +
> >
> > +/**
> >
> > +  CShake256 initial function.
> >
> > +
> >
> > +  Initializes user-supplied memory pointed by CShake256Context as cSHAKE-
> 256
> > hash context for
> >
> > +  subsequent use.
> >
> > +
> >
> > +  @param[out] CShake256Context  Pointer to cSHAKE-256 context being
> > initialized.
> >
> > +  @param[in]  OutputLen         The desired number of output length in bytes.
> >
> > +  @param[in]  Name              Pointer to the function name string.
> >
> > +  @param[in]  NameLen           The length of the function name in bytes.
> >
> > +  @param[in]  Customization     Pointer to the customization string.
> >
> > +  @param[in]  CustomizationLen  The length of the customization string in
> > bytes.
> >
> > +
> >
> > +  @retval TRUE   cSHAKE-256 context initialization succeeded.
> >
> > +  @retval FALSE  cSHAKE-256 context initialization failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +CShake256Init (
> >
> > +  OUT  VOID        *CShake256Context,
> >
> > +  IN   UINTN       OutputLen,
> >
> > +  IN   CONST VOID  *Name,
> >
> > +  IN   UINTN       NameLen,
> >
> > +  IN   CONST VOID  *Customization,
> >
> > +  IN   UINTN       CustomizationLen
> >
> > +  )
> >
> > +{
> >
> > +  BOOLEAN  Status;
> >
> > +  UINT8    EncBuf[sizeof (UINTN) + 1];
> >
> > +  UINTN    EncLen;
> >
> > +  UINTN    AbsorbLen;
> >
> > +  UINTN    PadLen;
> >
> > +
> >
> > +  //
> >
> > +  // Check input parameters.
> >
> > +  //
> >
> > +  if ((CShake256Context == NULL) || (OutputLen == 0) || ((NameLen != 0) &&
> > (Name == NULL)) || ((CustomizationLen != 0) && (Customization == NULL))) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  //
> >
> > +  // Initialize KECCAK context with pad value and block size.
> >
> > +  //
> >
> > +  if ((NameLen == 0) && (CustomizationLen == 0)) {
> >
> > +    //
> >
> > +    // When N and S are both empty strings, cSHAKE(X, L, N, S) is equivalent to
> >
> > +    // SHAKE as defined in FIPS 202.
> >
> > +    //
> >
> > +    Status = (BOOLEAN)KeccakInit (
> >
> > +                        (Keccak1600_Ctx *)CShake256Context,
> >
> > +                        '\x1f',
> >
> > +                        (KECCAK1600_WIDTH - CSHAKE256_SECURITY_STRENGTH * 2) /
> 8,
> >
> > +                        OutputLen
> >
> > +                        );
> >
> > +
> >
> > +    return Status;
> >
> > +  } else {
> >
> > +    Status = (BOOLEAN)KeccakInit (
> >
> > +                        (Keccak1600_Ctx *)CShake256Context,
> >
> > +                        '\x04',
> >
> > +                        (KECCAK1600_WIDTH - CSHAKE256_SECURITY_STRENGTH * 2) /
> 8,
> >
> > +                        OutputLen
> >
> > +                        );
> >
> > +    if (!Status) {
> >
> > +      return FALSE;
> >
> > +    }
> >
> > +
> >
> > +    AbsorbLen = 0;
> >
> > +    //
> >
> > +    // Absorb Absorb bytepad(.., rate).
> >
> > +    //
> >
> > +    EncLen = LeftEncode (EncBuf, CSHAKE256_RATE_IN_BYTES);
> >
> > +    Status = (BOOLEAN)Sha3Update ((Keccak1600_Ctx *)CShake256Context,
> > EncBuf, EncLen);
> >
> > +    if (!Status) {
> >
> > +      return FALSE;
> >
> > +    }
> >
> > +
> >
> > +    AbsorbLen += EncLen;
> >
> > +
> >
> > +    //
> >
> > +    // Absorb encode_string(N).
> >
> > +    //
> >
> > +    EncLen = LeftEncode (EncBuf, NameLen * 8);
> >
> > +    Status = (BOOLEAN)Sha3Update ((Keccak1600_Ctx *)CShake256Context,
> > EncBuf, EncLen);
> >
> > +    if (!Status) {
> >
> > +      return FALSE;
> >
> > +    }
> >
> > +
> >
> > +    AbsorbLen += EncLen;
> >
> > +    Status     = (BOOLEAN)Sha3Update ((Keccak1600_Ctx *)CShake256Context,
> > Name, NameLen);
> >
> > +    if (!Status) {
> >
> > +      return FALSE;
> >
> > +    }
> >
> > +
> >
> > +    AbsorbLen += NameLen;
> >
> > +
> >
> > +    //
> >
> > +    // Absorb encode_string(S).
> >
> > +    //
> >
> > +    EncLen = LeftEncode (EncBuf, CustomizationLen * 8);
> >
> > +    Status = (BOOLEAN)Sha3Update ((Keccak1600_Ctx *)CShake256Context,
> > EncBuf, EncLen);
> >
> > +    if (!Status) {
> >
> > +      return FALSE;
> >
> > +    }
> >
> > +
> >
> > +    AbsorbLen += EncLen;
> >
> > +    Status     = (BOOLEAN)Sha3Update ((Keccak1600_Ctx *)CShake256Context,
> > Customization, CustomizationLen);
> >
> > +    if (!Status) {
> >
> > +      return FALSE;
> >
> > +    }
> >
> > +
> >
> > +    AbsorbLen += CustomizationLen;
> >
> > +
> >
> > +    //
> >
> > +    // Absorb zero padding up to rate.
> >
> > +    //
> >
> > +    PadLen = CSHAKE256_RATE_IN_BYTES - AbsorbLen %
> > CSHAKE256_RATE_IN_BYTES;
> >
> > +    Status = (BOOLEAN)Sha3Update ((Keccak1600_Ctx *)CShake256Context,
> > mZeroPadding, PadLen);
> >
> > +    if (!Status) {
> >
> > +      return FALSE;
> >
> > +    }
> >
> > +
> >
> > +    return TRUE;
> >
> > +  }
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Digests the input data and updates cSHAKE-256 context.
> >
> > +
> >
> > +  This function performs cSHAKE-256 digest on a data buffer of the specified
> > size.
> >
> > +  It can be called multiple times to compute the digest of long or
> discontinuous
> > data streams.
> >
> > +  cSHAKE-256 context should be already correctly initialized by
> CShake256Init(),
> > and should not be finalized
> >
> > +  by CShake256Final(). Behavior with invalid context is undefined.
> >
> > +
> >
> > +  @param[in, out]  CShake256Context   Pointer to the cSHAKE-256 context.
> >
> > +  @param[in]       Data               Pointer to the buffer containing the data to be
> > hashed.
> >
> > +  @param[in]       DataSize           Size of Data buffer in bytes.
> >
> > +
> >
> > +  @retval TRUE   cSHAKE-256 data digest succeeded.
> >
> > +  @retval FALSE  cSHAKE-256 data digest failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +CShake256Update (
> >
> > +  IN OUT  VOID        *CShake256Context,
> >
> > +  IN      CONST VOID  *Data,
> >
> > +  IN      UINTN       DataSize
> >
> > +  )
> >
> > +{
> >
> > +  //
> >
> > +  // Check input parameters.
> >
> > +  //
> >
> > +  if (CShake256Context == NULL) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  //
> >
> > +  // Check invalid parameters, in case that only DataLength was checked in
> > OpenSSL.
> >
> > +  //
> >
> > +  if ((Data == NULL) && (DataSize != 0)) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  return (BOOLEAN)(Sha3Update ((Keccak1600_Ctx *)CShake256Context,
> Data,
> > DataSize));
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Completes computation of the cSHAKE-256 digest value.
> >
> > +
> >
> > +  This function completes cSHAKE-256 hash computation and retrieves the
> > digest value into
> >
> > +  the specified memory. After this function has been called, the cSHAKE-256
> > context cannot
> >
> > +  be used again.
> >
> > +  cSHAKE-256 context should be already correctly initialized by
> CShake256Init(),
> > and should not be
> >
> > +  finalized by CShake256Final(). Behavior with invalid cSHAKE-256 context is
> > undefined.
> >
> > +
> >
> > +  @param[in, out]  CShake256Context  Pointer to the cSHAKE-256 context.
> >
> > +  @param[out]      HashValue         Pointer to a buffer that receives the
> cSHAKE-
> > 256 digest
> >
> > +                                     value.
> >
> > +
> >
> > +  @retval TRUE   cSHAKE-256 digest computation succeeded.
> >
> > +  @retval FALSE  cSHAKE-256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +CShake256Final (
> >
> > +  IN OUT  VOID   *CShake256Context,
> >
> > +  OUT     UINT8  *HashValue
> >
> > +  )
> >
> > +{
> >
> > +  //
> >
> > +  // Check input parameters.
> >
> > +  //
> >
> > +  if ((CShake256Context == NULL) || (HashValue == NULL)) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  //
> >
> > +  // cSHAKE-256 Hash Finalization.
> >
> > +  //
> >
> > +  return (BOOLEAN)(Sha3Final ((Keccak1600_Ctx *)CShake256Context,
> > HashValue));
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Computes the CSHAKE-256 message digest of a input data buffer.
> >
> > +
> >
> > +  This function performs the CSHAKE-256 message digest of a given data
> buffer,
> > and places
> >
> > +  the digest value into the specified memory.
> >
> > +
> >
> > +  @param[in]   Data               Pointer to the buffer containing the data to be
> > hashed.
> >
> > +  @param[in]   DataSize           Size of Data buffer in bytes.
> >
> > +  @param[in]   OutputLen          Size of output in bytes.
> >
> > +  @param[in]   Name               Pointer to the function name string.
> >
> > +  @param[in]   NameLen            Size of the function name in bytes.
> >
> > +  @param[in]   Customization      Pointer to the customization string.
> >
> > +  @param[in]   CustomizationLen   Size of the customization string in bytes.
> >
> > +  @param[out]  HashValue          Pointer to a buffer that receives the CSHAKE-
> > 256 digest
> >
> > +                                  value.
> >
> > +
> >
> > +  @retval TRUE   CSHAKE-256 digest computation succeeded.
> >
> > +  @retval FALSE  CSHAKE-256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +CShake256HashAll (
> >
> > +  IN   CONST VOID  *Data,
> >
> > +  IN   UINTN       DataSize,
> >
> > +  IN   UINTN       OutputLen,
> >
> > +  IN   CONST VOID  *Name,
> >
> > +  IN   UINTN       NameLen,
> >
> > +  IN   CONST VOID  *Customization,
> >
> > +  IN   UINTN       CustomizationLen,
> >
> > +  OUT  UINT8       *HashValue
> >
> > +  )
> >
> > +{
> >
> > +  BOOLEAN         Status;
> >
> > +  Keccak1600_Ctx  Ctx;
> >
> > +
> >
> > +  //
> >
> > +  // Check input parameters.
> >
> > +  //
> >
> > +  if (HashValue == NULL) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  if ((Data == NULL) && (DataSize != 0)) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  Status = CShake256Init (&Ctx, OutputLen, Name, NameLen, Customization,
> > CustomizationLen);
> >
> > +  if (!Status) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  Status = CShake256Update (&Ctx, Data, DataSize);
> >
> > +  if (!Status) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  return CShake256Final (&Ctx, HashValue);
> >
> > +}
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.c
> > b/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.c
> > new file mode 100644
> > index 000000000000..f7ce9dbf523e
> > --- /dev/null
> > +++ b/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.c
> > @@ -0,0 +1,278 @@
> > +/** @file
> >
> > +  ParallelHash Implementation.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +**/
> >
> > +
> >
> > +#include "CryptParallelHash.h"
> >
> > +#include <Library/MmServicesTableLib.h>
> >
> > +#include <Library/SynchronizationLib.h>
> >
> > +
> >
> > +#define PARALLELHASH_CUSTOMIZATION  "ParallelHash"
> >
> > +
> >
> > +UINTN      mBlockNum;
> >
> > +UINTN      mBlockSize;
> >
> > +UINTN      mLastBlockSize;
> >
> > +UINT8      *mInput;
> >
> > +UINTN      mBlockResultSize;
> >
> > +UINT8      *mBlockHashResult;
> >
> > +BOOLEAN    *mBlockIsCompleted;
> >
> > +SPIN_LOCK  *mSpinLockList;
> >
> > +
> >
> > +/**
> >
> > +  Complete computation of digest of each block.
> >
> > +
> >
> > +  Each AP perform the function called by BSP.
> >
> > +
> >
> > +  @param[in] ProcedureArgument Argument of the procedure.
> >
> > +**/
> >
> > +VOID
> >
> > +EFIAPI
> >
> > +ParallelHashApExecute (
> >
> > +  IN VOID  *ProcedureArgument
> >
> > +  )
> >
> > +{
> >
> > +  UINTN    Index;
> >
> > +  BOOLEAN  Status;
> >
> > +
> >
> > +  for (Index = 0; Index < mBlockNum; Index++) {
> >
> > +    if (AcquireSpinLockOrFail (&mSpinLockList[Index])) {
> >
> > +      //
> >
> > +      // Completed, try next one.
> >
> > +      //
> >
> > +      if (mBlockIsCompleted[Index]) {
> >
> > +        ReleaseSpinLock (&mSpinLockList[Index]);
> >
> > +        continue;
> >
> > +      }
> >
> > +
> >
> > +      //
> >
> > +      // Calculate CShake256 for this block.
> >
> > +      //
> >
> > +      Status = CShake256HashAll (
> >
> > +                 mInput + Index * mBlockSize,
> >
> > +                 (Index == (mBlockNum - 1)) ? mLastBlockSize : mBlockSize,
> >
> > +                 mBlockResultSize,
> >
> > +                 NULL,
> >
> > +                 0,
> >
> > +                 NULL,
> >
> > +                 0,
> >
> > +                 mBlockHashResult + Index * mBlockResultSize
> >
> > +                 );
> >
> > +      if (!EFI_ERROR (Status)) {
> >
> > +        mBlockIsCompleted[Index] = TRUE;
> >
> > +      }
> >
> > +
> >
> > +      ReleaseSpinLock (&mSpinLockList[Index]);
> >
> > +    }
> >
> > +  }
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Dispatch the block task to each AP in SMM mode.
> >
> > +
> >
> > +**/
> >
> > +VOID
> >
> > +EFIAPI
> >
> > +MmDispatchBlockToAP (
> >
> > +  VOID
> >
> > +  )
> >
> > +{
> >
> > +  UINTN  Index;
> >
> > +
> >
> > +  for (Index = 0; Index < gMmst->NumberOfCpus; Index++) {
> >
> > +    if (Index != gMmst->CurrentlyExecutingCpu) {
> >
> > +      gMmst->MmStartupThisAp (ParallelHashApExecute, Index, NULL);
> >
> > +    }
> >
> > +  }
> >
> > +
> >
> > +  return;
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Parallel hash function ParallelHash256, as defined in NIST's Special
> Publication
> > 800-185,
> >
> > +  published December 2016.
> >
> > +
> >
> > +  @param[in]   Input            Pointer to the input message (X).
> >
> > +  @param[in]   InputByteLen     The number(>0) of input bytes provided for the
> > input data.
> >
> > +  @param[in]   BlockSize        The size of each block (B).
> >
> > +  @param[out]  Output           Pointer to the output buffer.
> >
> > +  @param[in]   OutputByteLen    The desired number of output bytes (L).
> >
> > +  @param[in]   Customization    Pointer to the customization string (S).
> >
> > +  @param[in]   CustomByteLen    The length of the customization string in
> bytes.
> >
> > +
> >
> > +  @retval TRUE   ParallelHash256 digest computation succeeded.
> >
> > +  @retval FALSE  ParallelHash256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +ParallelHash256HashAll (
> >
> > +  IN CONST VOID   *Input,
> >
> > +  IN       UINTN  InputByteLen,
> >
> > +  IN       UINTN  BlockSize,
> >
> > +  OUT      VOID   *Output,
> >
> > +  IN       UINTN  OutputByteLen,
> >
> > +  IN CONST VOID   *Customization,
> >
> > +  IN       UINTN  CustomByteLen
> >
> > +  )
> >
> > +{
> >
> > +  UINT8    EncBufB[sizeof (UINTN)+1];
> >
> > +  UINTN    EncSizeB;
> >
> > +  UINT8    EncBufN[sizeof (UINTN)+1];
> >
> > +  UINTN    EncSizeN;
> >
> > +  UINT8    EncBufL[sizeof (UINTN)+1];
> >
> > +  UINTN    EncSizeL;
> >
> > +  UINTN    Index;
> >
> > +  UINT8    *CombinedInput;
> >
> > +  UINTN    CombinedInputSize;
> >
> > +  BOOLEAN  AllCompleted;
> >
> > +  UINTN    Offset;
> >
> > +  BOOLEAN  ReturnValue;
> >
> > +
> >
> > +  if ((InputByteLen == 0) || (OutputByteLen == 0) || (BlockSize == 0)) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  if ((Input == NULL) || (Output == NULL)) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  if ((CustomByteLen != 0) && (Customization == NULL)) {
> >
> > +    return FALSE;
> >
> > +  }
> >
> > +
> >
> > +  mBlockSize = BlockSize;
> >
> > +
> >
> > +  //
> >
> > +  // Calculate block number n.
> >
> > +  //
> >
> > +  mBlockNum = InputByteLen % mBlockSize == 0 ? InputByteLen / mBlockSize :
> > InputByteLen / mBlockSize + 1;
> >
> > +
> >
> > +  //
> >
> > +  // Set hash result size of each block in bytes.
> >
> > +  //
> >
> > +  mBlockResultSize = OutputByteLen;
> >
> > +
> >
> > +  //
> >
> > +  // Encode B, n, L to string and record size.
> >
> > +  //
> >
> > +  EncSizeB = LeftEncode (EncBufB, mBlockSize);
> >
> > +  EncSizeN = RightEncode (EncBufN, mBlockNum);
> >
> > +  EncSizeL = RightEncode (EncBufL, OutputByteLen * CHAR_BIT);
> >
> > +
> >
> > +  //
> >
> > +  // Allocate buffer for combined input (newX), Block completed flag and
> > SpinLock.
> >
> > +  //
> >
> > +  CombinedInputSize = EncSizeB + EncSizeN + EncSizeL + mBlockNum *
> > mBlockResultSize;
> >
> > +  CombinedInput     = AllocateZeroPool (CombinedInputSize);
> >
> > +  mBlockIsCompleted = AllocateZeroPool (mBlockNum * sizeof (BOOLEAN));
> >
> > +  mSpinLockList     = AllocatePool (mBlockNum * sizeof (SPIN_LOCK));
> >
> > +  if ((CombinedInput == NULL) || (mBlockIsCompleted == NULL) ||
> > (mSpinLockList == NULL)) {
> >
> > +    ReturnValue = FALSE;
> >
> > +    goto Exit;
> >
> > +  }
> >
> > +
> >
> > +  //
> >
> > +  // Fill LeftEncode(B).
> >
> > +  //
> >
> > +  CopyMem (CombinedInput, EncBufB, EncSizeB);
> >
> > +
> >
> > +  //
> >
> > +  // Prepare for parallel hash.
> >
> > +  //
> >
> > +  mBlockHashResult = CombinedInput + EncSizeB;
> >
> > +  mInput           = (UINT8 *)Input;
> >
> > +  mLastBlockSize   = InputByteLen % mBlockSize == 0 ? mBlockSize :
> > InputByteLen % mBlockSize;
> >
> > +
> >
> > +  //
> >
> > +  // Initialize SpinLock for each result block.
> >
> > +  //
> >
> > +  for (Index = 0; Index < mBlockNum; Index++) {
> >
> > +    InitializeSpinLock (&mSpinLockList[Index]);
> >
> > +  }
> >
> > +
> >
> > +  //
> >
> > +  // Dispatch blocklist to each AP.
> >
> > +  //
> >
> > +  if (gMmst != NULL) {
> >
> > +    MmDispatchBlockToAP ();
> >
> > +  }
> >
> > +
> >
> > +  //
> >
> > +  // Wait until all block hash completed.
> >
> > +  //
> >
> > +  do {
> >
> > +    AllCompleted = TRUE;
> >
> > +    for (Index = 0; Index < mBlockNum; Index++) {
> >
> > +      if (AcquireSpinLockOrFail (&mSpinLockList[Index])) {
> >
> > +        if (!mBlockIsCompleted[Index]) {
> >
> > +          AllCompleted = FALSE;
> >
> > +          ReturnValue  = CShake256HashAll (
> >
> > +                           mInput + Index * mBlockSize,
> >
> > +                           (Index == (mBlockNum - 1)) ? mLastBlockSize : mBlockSize,
> >
> > +                           mBlockResultSize,
> >
> > +                           NULL,
> >
> > +                           0,
> >
> > +                           NULL,
> >
> > +                           0,
> >
> > +                           mBlockHashResult + Index * mBlockResultSize
> >
> > +                           );
> >
> > +          if (ReturnValue) {
> >
> > +            mBlockIsCompleted[Index] = TRUE;
> >
> > +          }
> >
> > +
> >
> > +          ReleaseSpinLock (&mSpinLockList[Index]);
> >
> > +          break;
> >
> > +        }
> >
> > +
> >
> > +        ReleaseSpinLock (&mSpinLockList[Index]);
> >
> > +      } else {
> >
> > +        AllCompleted = FALSE;
> >
> > +        break;
> >
> > +      }
> >
> > +    }
> >
> > +  } while (!AllCompleted);
> >
> > +
> >
> > +  //
> >
> > +  // Fill LeftEncode(n).
> >
> > +  //
> >
> > +  Offset = EncSizeB + mBlockNum * mBlockResultSize;
> >
> > +  CopyMem (CombinedInput + Offset, EncBufN, EncSizeN);
> >
> > +
> >
> > +  //
> >
> > +  // Fill LeftEncode(L).
> >
> > +  //
> >
> > +  Offset += EncSizeN;
> >
> > +  CopyMem (CombinedInput + Offset, EncBufL, EncSizeL);
> >
> > +
> >
> > +  ReturnValue = CShake256HashAll (
> >
> > +                  CombinedInput,
> >
> > +                  CombinedInputSize,
> >
> > +                  OutputByteLen,
> >
> > +                  PARALLELHASH_CUSTOMIZATION,
> >
> > +                  AsciiStrLen (PARALLELHASH_CUSTOMIZATION),
> >
> > +                  Customization,
> >
> > +                  CustomByteLen,
> >
> > +                  Output
> >
> > +                  );
> >
> > +
> >
> > +Exit:
> >
> > +  ZeroMem (CombinedInput, CombinedInputSize);
> >
> > +
> >
> > +  if (CombinedInput != NULL) {
> >
> > +    FreePool (CombinedInput);
> >
> > +  }
> >
> > +
> >
> > +  if (mSpinLockList != NULL) {
> >
> > +    FreePool ((VOID *)mSpinLockList);
> >
> > +  }
> >
> > +
> >
> > +  if (mBlockIsCompleted != NULL) {
> >
> > +    FreePool (mBlockIsCompleted);
> >
> > +  }
> >
> > +
> >
> > +  return ReturnValue;
> >
> > +}
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHashNull.c
> > b/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHashNull.c
> > new file mode 100644
> > index 000000000000..2bf89594def5
> > --- /dev/null
> > +++ b/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHashNull.c
> > @@ -0,0 +1,40 @@
> > +/** @file
> >
> > +  ParallelHash Implementation which does not provide real capabilities.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +**/
> >
> > +
> >
> > +#include "InternalCryptLib.h"
> >
> > +
> >
> > +/**
> >
> > +  Parallel hash function ParallelHash256, as defined in NIST's Special
> Publication
> > 800-185,
> >
> > +  published December 2016.
> >
> > +
> >
> > +  @param[in]   Input            Pointer to the input message (X).
> >
> > +  @param[in]   InputByteLen     The number(>0) of input bytes provided for the
> > input data.
> >
> > +  @param[in]   BlockSize        The size of each block (B).
> >
> > +  @param[out]  Output           Pointer to the output buffer.
> >
> > +  @param[in]   OutputByteLen    The desired number of output bytes (L).
> >
> > +  @param[in]   Customization    Pointer to the customization string (S).
> >
> > +  @param[in]   CustomByteLen    The length of the customization string in
> bytes.
> >
> > +
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +ParallelHash256HashAll (
> >
> > +  IN CONST VOID   *Input,
> >
> > +  IN       UINTN  InputByteLen,
> >
> > +  IN       UINTN  BlockSize,
> >
> > +  OUT      VOID   *Output,
> >
> > +  IN       UINTN  OutputByteLen,
> >
> > +  IN CONST VOID   *Customization,
> >
> > +  IN       UINTN  CustomByteLen
> >
> > +  )
> >
> > +{
> >
> > +  ASSERT (FALSE);
> >
> > +  return FALSE;
> >
> > +}
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/Hash/CryptSha3.c
> > b/CryptoPkg/Library/BaseCryptLib/Hash/CryptSha3.c
> > new file mode 100644
> > index 000000000000..6abafc3c00e6
> > --- /dev/null
> > +++ b/CryptoPkg/Library/BaseCryptLib/Hash/CryptSha3.c
> > @@ -0,0 +1,166 @@
> > +/** @file
> >
> > +  SHA3 realted functions from OpenSSL.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +Copyright 2022 The OpenSSL Project Authors. All Rights Reserved.
> >
> > +Licensed under the OpenSSL license (the "License").  You may not use
> >
> > +this file except in compliance with the License.  You can obtain a copy
> >
> > +in the file LICENSE in the source distribution or at
> >
> > +https://www.openssl.org/source/license.html
> >
> > +**/
> >
> > +
> >
> > +#include "CryptParallelHash.h"
> >
> > +
> >
> > +/**
> >
> > +  Keccak initial fuction.
> >
> > +
> >
> > +  Set up state with specified capacity.
> >
> > +
> >
> > +  @param[out] Context           Pointer to the context being initialized.
> >
> > +  @param[in]  Pad               Delimited Suffix.
> >
> > +  @param[in]  BlockSize         Size of context block.
> >
> > +  @param[in]  MessageDigestLen  Size of message digest in bytes.
> >
> > +
> >
> > +  @retval 1  Initialize successfully.
> >
> > +  @retval 0  Fail to initialize.
> >
> > +**/
> >
> > +UINT8
> >
> > +EFIAPI
> >
> > +KeccakInit (
> >
> > +  OUT Keccak1600_Ctx  *Context,
> >
> > +  IN  UINT8           Pad,
> >
> > +  IN  UINTN           BlockSize,
> >
> > +  IN  UINTN           MessageDigestLen
> >
> > +  )
> >
> > +{
> >
> > +  if (BlockSize <= sizeof (Context->buf)) {
> >
> > +    memset (Context->A, 0, sizeof (Context->A));
> >
> > +
> >
> > +    Context->num        = 0;
> >
> > +    Context->block_size = BlockSize;
> >
> > +    Context->md_size    = MessageDigestLen;
> >
> > +    Context->pad        = Pad;
> >
> > +
> >
> > +    return 1;
> >
> > +  }
> >
> > +
> >
> > +  return 0;
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Sha3 update fuction.
> >
> > +
> >
> > +  This function performs Sha3 digest on a data buffer of the specified size.
> >
> > +  It can be called multiple times to compute the digest of long or
> discontinuous
> > data streams.
> >
> > +
> >
> > +  @param[in,out] Context   Pointer to the Keccak context.
> >
> > +  @param[in]     Data      Pointer to the buffer containing the data to be
> hashed.
> >
> > +  @param[in]     DataSize  Size of Data buffer in bytes.
> >
> > +
> >
> > +  @retval 1  Update successfully.
> >
> > +**/
> >
> > +UINT8
> >
> > +EFIAPI
> >
> > +Sha3Update (
> >
> > +  IN OUT Keccak1600_Ctx  *Context,
> >
> > +  IN const VOID          *Data,
> >
> > +  IN UINTN               DataSize
> >
> > +  )
> >
> > +{
> >
> > +  const UINT8  *DataCopy;
> >
> > +  UINTN        BlockSize;
> >
> > +  UINTN        Num;
> >
> > +  UINTN        Rem;
> >
> > +
> >
> > +  DataCopy  = Data;
> >
> > +  BlockSize = (UINT8)(Context->block_size);
> >
> > +
> >
> > +  if (DataSize == 0) {
> >
> > +    return 1;
> >
> > +  }
> >
> > +
> >
> > +  if ((Num = Context->num) != 0) {
> >
> > +    //
> >
> > +    // process intermediate buffer
> >
> > +    //
> >
> > +    Rem = BlockSize - Num;
> >
> > +
> >
> > +    if (DataSize < Rem) {
> >
> > +      memcpy (Context->buf + Num, DataCopy, DataSize);
> >
> > +      Context->num += DataSize;
> >
> > +      return 1;
> >
> > +    }
> >
> > +
> >
> > +    //
> >
> > +    // We have enough data to fill or overflow the intermediate
> >
> > +    // buffer. So we append |Rem| bytes and process the block,
> >
> > +    // leaving the rest for later processing.
> >
> > +    //
> >
> > +    memcpy (Context->buf + Num, DataCopy, Rem);
> >
> > +    DataCopy += Rem;
> >
> > +    DataSize -= Rem;
> >
> > +    (void)SHA3_absorb (Context->A, Context->buf, BlockSize, BlockSize);
> >
> > +    Context->num = 0;
> >
> > +    // Context->buf is processed, Context->num is guaranteed to be zero.
> >
> > +  }
> >
> > +
> >
> > +  if (DataSize >= BlockSize) {
> >
> > +    Rem = SHA3_absorb (Context->A, DataCopy, DataSize, BlockSize);
> >
> > +  } else {
> >
> > +    Rem = DataSize;
> >
> > +  }
> >
> > +
> >
> > +  if (Rem > 0) {
> >
> > +    memcpy (Context->buf, DataCopy + DataSize - Rem, Rem);
> >
> > +    Context->num = Rem;
> >
> > +  }
> >
> > +
> >
> > +  return 1;
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Completes computation of Sha3 message digest.
> >
> > +
> >
> > +  This function completes sha3 hash computation and retrieves the digest
> value
> > into
> >
> > +  the specified memory. After this function has been called, the keccak
> context
> > cannot
> >
> > +  be used again.
> >
> > +
> >
> > +  @param[in, out]  Context        Pointer to the keccak context.
> >
> > +  @param[out]      MessageDigest  Pointer to a buffer that receives the
> > message digest.
> >
> > +
> >
> > +  @retval 1   Meaasge digest computation succeeded.
> >
> > +**/
> >
> > +UINT8
> >
> > +EFIAPI
> >
> > +Sha3Final (
> >
> > +  IN OUT Keccak1600_Ctx  *Context,
> >
> > +  OUT    UINT8           *MessageDigest
> >
> > +  )
> >
> > +{
> >
> > +  UINTN  BlockSize;
> >
> > +  UINTN  Num;
> >
> > +
> >
> > +  BlockSize = Context->block_size;
> >
> > +  Num       = Context->num;
> >
> > +
> >
> > +  if (Context->md_size == 0) {
> >
> > +    return 1;
> >
> > +  }
> >
> > +
> >
> > +  //
> >
> > +  // Pad the data with 10*1. Note that |Num| can be |BlockSize - 1|
> >
> > +  // in which case both byte operations below are performed on
> >
> > +  // same byte.
> >
> > +  //
> >
> > +  memset (Context->buf + Num, 0, BlockSize - Num);
> >
> > +  Context->buf[Num]            = Context->pad;
> >
> > +  Context->buf[BlockSize - 1] |= 0x80;
> >
> > +
> >
> > +  (void)SHA3_absorb (Context->A, Context->buf, BlockSize, BlockSize);
> >
> > +
> >
> > +  SHA3_squeeze (Context->A, MessageDigest, Context->md_size, BlockSize);
> >
> > +
> >
> > +  return 1;
> >
> > +}
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/Hash/CryptXkcp.c
> > b/CryptoPkg/Library/BaseCryptLib/Hash/CryptXkcp.c
> > new file mode 100644
> > index 000000000000..12c46cfbcd59
> > --- /dev/null
> > +++ b/CryptoPkg/Library/BaseCryptLib/Hash/CryptXkcp.c
> > @@ -0,0 +1,107 @@
> > +/** @file
> >
> > +  Encode realted functions from Xkcp.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +Copyright 2022 The eXtended Keccak Code Package (XKCP)
> >
> > +https://github.com/XKCP/XKCP
> >
> > +Keccak, designed by Guido Bertoni, Joan Daemen, Michael Peeters and Gilles
> > Van Assche.
> >
> > +Implementation by the designers, hereby denoted as "the implementer".
> >
> > +For more information, feedback or questions, please refer to the Keccak
> Team
> > website:
> >
> > +https://keccak.team/
> >
> > +To the extent possible under law, the implementer has waived all copyright
> >
> > +and related or neighboring rights to the source code in this file.
> >
> > +http://creativecommons.org/publicdomain/zero/1.0/
> >
> > +
> >
> > +**/
> >
> > +
> >
> > +#include "CryptParallelHash.h"
> >
> > +
> >
> > +/**
> >
> > +  Encode function from XKCP.
> >
> > +
> >
> > +  Encodes the input as a byte string in a way that can be unambiguously
> parsed
> >
> > +  from the beginning of the string by inserting the length of the byte string
> >
> > +  before the byte string representation of input.
> >
> > +
> >
> > +  @param[out] EncBuf  Result of left encode.
> >
> > +  @param[in]  Value   Input of left encode.
> >
> > +
> >
> > +  @retval EncLen  Size of encode result in bytes.
> >
> > +**/
> >
> > +UINTN
> >
> > +EFIAPI
> >
> > +LeftEncode (
> >
> > +  OUT UINT8  *EncBuf,
> >
> > +  IN  UINTN  Value
> >
> > +  )
> >
> > +{
> >
> > +  UINT32  BlockNum;
> >
> > +  UINT32  EncLen;
> >
> > +  UINT32  Index;
> >
> > +  UINTN   ValueCopy;
> >
> > +
> >
> > +  for ( ValueCopy = Value, BlockNum = 0; ValueCopy && (BlockNum < sizeof
> > (UINTN)); ++BlockNum, ValueCopy >>= 8 ) {
> >
> > +    //
> >
> > +    // Empty
> >
> > +    //
> >
> > +  }
> >
> > +
> >
> > +  if (BlockNum == 0) {
> >
> > +    BlockNum = 1;
> >
> > +  }
> >
> > +
> >
> > +  for (Index = 1; Index <= BlockNum; ++Index) {
> >
> > +    EncBuf[Index] = (UINT8)(Value >> (8 * (BlockNum - Index)));
> >
> > +  }
> >
> > +
> >
> > +  EncBuf[0] = (UINT8)BlockNum;
> >
> > +  EncLen    = BlockNum + 1;
> >
> > +
> >
> > +  return EncLen;
> >
> > +}
> >
> > +
> >
> > +/**
> >
> > +  Encode function from XKCP.
> >
> > +
> >
> > +  Encodes the input as a byte string in a way that can be unambiguously
> parsed
> >
> > +  from the end of the string by inserting the length of the byte string after
> >
> > +  the byte string representation of input.
> >
> > +
> >
> > +  @param[out] EncBuf  Result of right encode.
> >
> > +  @param[in]  Value   Input of right encode.
> >
> > +
> >
> > +  @retval EncLen  Size of encode result in bytes.
> >
> > +**/
> >
> > +UINTN
> >
> > +EFIAPI
> >
> > +RightEncode (
> >
> > +  OUT UINT8  *EncBuf,
> >
> > +  IN  UINTN  Value
> >
> > +  )
> >
> > +{
> >
> > +  UINT32  BlockNum;
> >
> > +  UINT32  EncLen;
> >
> > +  UINT32  Index;
> >
> > +  UINTN   ValueCopy;
> >
> > +
> >
> > +  for (ValueCopy = Value, BlockNum = 0; ValueCopy && (BlockNum < sizeof
> > (UINTN)); ++BlockNum, ValueCopy >>= 8) {
> >
> > +    //
> >
> > +    // Empty
> >
> > +    //
> >
> > +  }
> >
> > +
> >
> > +  if (BlockNum == 0) {
> >
> > +    BlockNum = 1;
> >
> > +  }
> >
> > +
> >
> > +  for (Index = 1; Index <= BlockNum; ++Index) {
> >
> > +    EncBuf[Index-1] = (UINT8)(Value >> (8 * (BlockNum-Index)));
> >
> > +  }
> >
> > +
> >
> > +  EncBuf[BlockNum] = (UINT8)BlockNum;
> >
> > +  EncLen           = BlockNum + 1;
> >
> > +
> >
> > +  return EncLen;
> >
> > +}
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLibNull/Hash/CryptParallelHashNull.c
> > b/CryptoPkg/Library/BaseCryptLibNull/Hash/CryptParallelHashNull.c
> > new file mode 100644
> > index 000000000000..2bf89594def5
> > --- /dev/null
> > +++ b/CryptoPkg/Library/BaseCryptLibNull/Hash/CryptParallelHashNull.c
> > @@ -0,0 +1,40 @@
> > +/** @file
> >
> > +  ParallelHash Implementation which does not provide real capabilities.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +**/
> >
> > +
> >
> > +#include "InternalCryptLib.h"
> >
> > +
> >
> > +/**
> >
> > +  Parallel hash function ParallelHash256, as defined in NIST's Special
> Publication
> > 800-185,
> >
> > +  published December 2016.
> >
> > +
> >
> > +  @param[in]   Input            Pointer to the input message (X).
> >
> > +  @param[in]   InputByteLen     The number(>0) of input bytes provided for the
> > input data.
> >
> > +  @param[in]   BlockSize        The size of each block (B).
> >
> > +  @param[out]  Output           Pointer to the output buffer.
> >
> > +  @param[in]   OutputByteLen    The desired number of output bytes (L).
> >
> > +  @param[in]   Customization    Pointer to the customization string (S).
> >
> > +  @param[in]   CustomByteLen    The length of the customization string in
> bytes.
> >
> > +
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +ParallelHash256HashAll (
> >
> > +  IN CONST VOID   *Input,
> >
> > +  IN       UINTN  InputByteLen,
> >
> > +  IN       UINTN  BlockSize,
> >
> > +  OUT      VOID   *Output,
> >
> > +  IN       UINTN  OutputByteLen,
> >
> > +  IN CONST VOID   *Customization,
> >
> > +  IN       UINTN  CustomByteLen
> >
> > +  )
> >
> > +{
> >
> > +  ASSERT (FALSE);
> >
> > +  return FALSE;
> >
> > +}
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLibOnProtocolPpi/CryptLib.c
> > b/CryptoPkg/Library/BaseCryptLibOnProtocolPpi/CryptLib.c
> > index c8df259ea963..8ee1b53cf957 100644
> > --- a/CryptoPkg/Library/BaseCryptLibOnProtocolPpi/CryptLib.c
> > +++ b/CryptoPkg/Library/BaseCryptLibOnProtocolPpi/CryptLib.c
> > @@ -3,7 +3,7 @@
> >    Protocol/PPI.
> >
> >
> >
> >    Copyright (C) Microsoft Corporation. All rights reserved.
> >
> > -  Copyright (c) 2019 - 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +  Copyright (c) 2019 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >    SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >
> >
> >  **/
> >
> > @@ -870,6 +870,38 @@ Sha512HashAll (
> >    CALL_CRYPTO_SERVICE (Sha512HashAll, (Data, DataSize, HashValue), FALSE);
> >
> >  }
> >
> >
> >
> > +/**
> >
> > +  Parallel hash function ParallelHash256, as defined in NIST's Special
> Publication
> > 800-185,
> >
> > +  published December 2016.
> >
> > +
> >
> > +  @param[in]   Input            Pointer to the input message (X).
> >
> > +  @param[in]   InputByteLen     The number(>0) of input bytes provided for the
> > input data.
> >
> > +  @param[in]   BlockSize        The size of each block (B).
> >
> > +  @param[out]  Output           Pointer to the output buffer.
> >
> > +  @param[in]   OutputByteLen    The desired number of output bytes (L).
> >
> > +  @param[in]   Customization    Pointer to the customization string (S).
> >
> > +  @param[in]   CustomByteLen    The length of the customization string in
> bytes.
> >
> > +
> >
> > +  @retval TRUE   ParallelHash256 digest computation succeeded.
> >
> > +  @retval FALSE  ParallelHash256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +ParallelHash256HashAll (
> >
> > +  IN CONST VOID   *Input,
> >
> > +  IN       UINTN  InputByteLen,
> >
> > +  IN       UINTN  BlockSize,
> >
> > +  OUT      VOID   *Output,
> >
> > +  IN       UINTN  OutputByteLen,
> >
> > +  IN CONST VOID   *Customization,
> >
> > +  IN       UINTN  CustomByteLen
> >
> > +  )
> >
> > +{
> >
> > +  CALL_CRYPTO_SERVICE (ParallelHash256HashAll, (Input, InputByteLen,
> > BlockSize, Output, OutputByteLen, Customization, CustomByteLen), FALSE);
> >
> > +}
> >
> > +
> >
> >  /**
> >
> >    Retrieves the size, in bytes, of the context buffer required for SM3 hash
> > operations.
> >
> >
> >
> > diff --git a/CryptoPkg/Test/UnitTest/Library/BaseCryptLib/ParallelhashTests.c
> > b/CryptoPkg/Test/UnitTest/Library/BaseCryptLib/ParallelhashTests.c
> > new file mode 100644
> > index 000000000000..fb57e91a9f16
> > --- /dev/null
> > +++ b/CryptoPkg/Test/UnitTest/Library/BaseCryptLib/ParallelhashTests.c
> > @@ -0,0 +1,145 @@
> > +/** @file
> >
> > +  Application for Parallelhash Function Validation.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +**/
> >
> > +
> >
> > +#include "TestBaseCryptLib.h"
> >
> > +
> >
> > +//
> >
> > +// Parallelhash Test Sample common parameters.
> >
> > +//
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST UINTN  OutputByteLen = 64;
> >
> > +
> >
> > +//
> >
> > +// Parallelhash Test Sample #1 from NIST Special Publication 800-185.
> >
> > +//
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST UINT8  InputSample1[] = {
> >
> > +  // input data of sample1.
> >
> > +  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x10, 0x11, 0x12, 0x13,
> 0x14,
> > 0x15, 0x16, 0x17,
> >
> > +  0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27
> >
> > +};
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        InputSample1ByteLen   =
> 24;
> > // Length of sample1 input data in bytes.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST VOID
> *CustomizationSample1
> > = "";        // Customization string (S) of sample1.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        CustomSample1ByteLen  =
> 0;
> > // Customization string length of sample1 in bytes.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        BlockSizeSample1      = 8;
> > // Block size of sample1.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST UINT8
> ExpectOutputSample1[]
> > = {
> >
> > +  // Expected output data of sample1.
> >
> > +  0xbc, 0x1e, 0xf1, 0x24, 0xda, 0x34, 0x49, 0x5e, 0x94, 0x8e, 0xad, 0x20,
> 0x7d,
> > 0xd9, 0x84, 0x22,
> >
> > +  0x35, 0xda, 0x43, 0x2d, 0x2b, 0xbc, 0x54, 0xb4, 0xc1, 0x10, 0xe6, 0x4c,
> 0x45,
> > 0x11, 0x05, 0x53,
> >
> > +  0x1b, 0x7f, 0x2a, 0x3e, 0x0c, 0xe0, 0x55, 0xc0, 0x28, 0x05, 0xe7, 0xc2, 0xde,
> > 0x1f, 0xb7, 0x46,
> >
> > +  0xaf, 0x97, 0xa1, 0xd0, 0x01, 0xf4, 0x3b, 0x82, 0x4e, 0x31, 0xb8, 0x76, 0x12,
> > 0x41, 0x04, 0x29
> >
> > +};
> >
> > +
> >
> > +//
> >
> > +// Parallelhash Test Sample #2 from NIST Special Publication 800-185.
> >
> > +//
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST UINT8  *InputSample2         =
> > InputSample1;               // Input of sample2 is same as sample1.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        InputSample2ByteLen   =
> 24;
> > // Length of sample2 input data in bytes.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST VOID
> *CustomizationSample2
> > = "Parallel Data";            // Customization string (S) of sample2.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        CustomSample2ByteLen  =
> > 13;                         // Customization string length of sample2 in bytes.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        BlockSizeSample2      = 8;
> > // Block size of sample2.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST UINT8
> ExpectOutputSample2[]
> > = {
> >
> > +  // Expected output data of sample2.
> >
> > +  0xcd, 0xf1, 0x52, 0x89, 0xb5, 0x4f, 0x62, 0x12, 0xb4, 0xbc, 0x27, 0x05, 0x28,
> > 0xb4, 0x95, 0x26,
> >
> > +  0x00, 0x6d, 0xd9, 0xb5, 0x4e, 0x2b, 0x6a, 0xdd, 0x1e, 0xf6, 0x90, 0x0d,
> 0xda,
> > 0x39, 0x63, 0xbb,
> >
> > +  0x33, 0xa7, 0x24, 0x91, 0xf2, 0x36, 0x96, 0x9c, 0xa8, 0xaf, 0xae, 0xa2, 0x9c,
> > 0x68, 0x2d, 0x47,
> >
> > +  0xa3, 0x93, 0xc0, 0x65, 0xb3, 0x8e, 0x29, 0xfa, 0xe6, 0x51, 0xa2, 0x09, 0x1c,
> > 0x83, 0x31, 0x10
> >
> > +};
> >
> > +
> >
> > +//
> >
> > +// Parallelhash Test Sample #3 from NIST Special Publication 800-185.
> >
> > +//
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST UINT8  InputSample3[] = {
> >
> > +  // input data of sample3.
> >
> > +  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
> 0x10,
> > 0x11, 0x12, 0x13,
> >
> > +  0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, 0x20, 0x21, 0x22, 0x23,
> 0x24,
> > 0x25, 0x26, 0x27,
> >
> > +  0x28, 0x29, 0x2a, 0x2b, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
> 0x38,
> > 0x39, 0x3a, 0x3b,
> >
> > +  0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b,
> 0x50,
> > 0x51, 0x52, 0x53,
> >
> > +  0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5a, 0x5b
> >
> > +};
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        InputSample3ByteLen   =
> 72;
> > // Length of sample3 input data in bytes.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST VOID
> *CustomizationSample3
> > = "Parallel Data";            // Customization string (S) of sample3.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        CustomSample3ByteLen  =
> > 13;                         // Customization string length of sample3 in bytes.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED UINTN        BlockSizeSample3      = 12;
> > // Block size of sample3.
> >
> > +GLOBAL_REMOVE_IF_UNREFERENCED CONST UINT8
> ExpectOutputSample3[]
> > = {
> >
> > +  // Expected output data of sample3.
> >
> > +  0x69, 0xd0, 0xfc, 0xb7, 0x64, 0xea, 0x05, 0x5d, 0xd0, 0x93, 0x34, 0xbc, 0x60,
> > 0x21, 0xcb, 0x7e,
> >
> > +  0x4b, 0x61, 0x34, 0x8d, 0xff, 0x37, 0x5d, 0xa2, 0x62, 0x67, 0x1c, 0xde, 0xc3,
> > 0xef, 0xfa, 0x8d,
> >
> > +  0x1b, 0x45, 0x68, 0xa6, 0xcc, 0xe1, 0x6b, 0x1c, 0xad, 0x94, 0x6d, 0xdd,
> 0xe2,
> > 0x7f, 0x6c, 0xe2,
> >
> > +  0xb8, 0xde, 0xe4, 0xcd, 0x1b, 0x24, 0x85, 0x1e, 0xbf, 0x00, 0xeb, 0x90,
> 0xd4,
> > 0x38, 0x13, 0xe9
> >
> > +};
> >
> > +
> >
> > +UNIT_TEST_STATUS
> >
> > +EFIAPI
> >
> > +TestVerifyParallelHash256HashAll (
> >
> > +  IN UNIT_TEST_CONTEXT  Context
> >
> > +  )
> >
> > +{
> >
> > +  BOOLEAN  Status;
> >
> > +  UINT8    Output[64];
> >
> > +
> >
> > +  //
> >
> > +  // Test #1 using sample1.
> >
> > +  //
> >
> > +  Status = ParallelHash256HashAll (
> >
> > +             InputSample1,
> >
> > +             InputSample1ByteLen,
> >
> > +             BlockSizeSample1,
> >
> > +             Output,
> >
> > +             OutputByteLen,
> >
> > +             CustomizationSample1,
> >
> > +             CustomSample1ByteLen
> >
> > +             );
> >
> > +  UT_ASSERT_TRUE (Status);
> >
> > +
> >
> > +  // Check the output with the expected output.
> >
> > +  UT_ASSERT_MEM_EQUAL (Output, ExpectOutputSample1, OutputByteLen);
> >
> > +
> >
> > +  //
> >
> > +  // Test #2 using sample2.
> >
> > +  //
> >
> > +  Status = ParallelHash256HashAll (
> >
> > +             InputSample2,
> >
> > +             InputSample2ByteLen,
> >
> > +             BlockSizeSample2,
> >
> > +             Output,
> >
> > +             OutputByteLen,
> >
> > +             CustomizationSample2,
> >
> > +             CustomSample2ByteLen
> >
> > +             );
> >
> > +  UT_ASSERT_TRUE (Status);
> >
> > +
> >
> > +  // Check the output with the expected output.
> >
> > +  UT_ASSERT_MEM_EQUAL (Output, ExpectOutputSample2, OutputByteLen);
> >
> > +
> >
> > +  //
> >
> > +  // Test #3 using sample3.
> >
> > +  //
> >
> > +  Status = ParallelHash256HashAll (
> >
> > +             InputSample3,
> >
> > +             InputSample3ByteLen,
> >
> > +             BlockSizeSample3,
> >
> > +             Output,
> >
> > +             OutputByteLen,
> >
> > +             CustomizationSample3,
> >
> > +             CustomSample3ByteLen
> >
> > +             );
> >
> > +  UT_ASSERT_TRUE (Status);
> >
> > +
> >
> > +  // Check the output with the expected output.
> >
> > +  UT_ASSERT_MEM_EQUAL (Output, ExpectOutputSample3, OutputByteLen);
> >
> > +
> >
> > +  return EFI_SUCCESS;
> >
> > +}
> >
> > +
> >
> > +TEST_DESC  mParallelhashTest[] = {
> >
> > +  //
> >
> > +  // -----Description------------------------------Class----------------------Function--
> --
> > -------------Pre---Post--Context
> >
> > +  //
> >
> > +  { "TestVerifyParallelHash256HashAll()",
> > "CryptoPkg.BaseCryptLib.ParallelHash256HashAll",
> > TestVerifyParallelHash256HashAll, NULL, NULL, NULL },
> >
> > +};
> >
> > +
> >
> > +UINTN  mParallelhashTestNum = ARRAY_SIZE (mParallelhashTest);
> >
> > diff --git a/CryptoPkg/CryptoPkg.ci.yaml b/CryptoPkg/CryptoPkg.ci.yaml
> > index eeb388ae71c5..e21fafac1efe 100644
> > --- a/CryptoPkg/CryptoPkg.ci.yaml
> > +++ b/CryptoPkg/CryptoPkg.ci.yaml
> > @@ -2,7 +2,7 @@
> >  # CI configuration for CryptoPkg
> >
> >  #
> >
> >  # Copyright (c) Microsoft Corporation
> >
> > -# Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +# Copyright (c) 2020 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  # SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >  ##
> >
> >  {
> >
> > @@ -34,6 +34,8 @@
> >              "Library/OpensslLib/rand_pool.c",
> >
> >              # This has OpenSSL interfaces that aren't UEFI spec compliant
> >
> >              "Library/Include/CrtLibSupport.h",
> >
> > +            # This has OpenSSL interfaces that aren't UEFI spec compliant
> >
> > +            "Library/BaseCryptLib/Hash/CryptParallelHash.h",
> >
> >              # These directories contain auto-generated OpenSSL content
> >
> >              "Library/OpensslLib",
> >
> >              "Library/IntrinsicLib",
> >
> > diff --git a/CryptoPkg/Include/Library/BaseCryptLib.h
> > b/CryptoPkg/Include/Library/BaseCryptLib.h
> > index f4bc7c0d73d9..7d1499350a49 100644
> > --- a/CryptoPkg/Include/Library/BaseCryptLib.h
> > +++ b/CryptoPkg/Include/Library/BaseCryptLib.h
> > @@ -4,7 +4,7 @@
> >    primitives (Hash Serials, HMAC, RSA, Diffie-Hellman, etc) for UEFI security
> >
> >    functionality enabling.
> >
> >
> >
> > -Copyright (c) 2009 - 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +Copyright (c) 2009 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >
> >
> >  **/
> >
> > @@ -753,6 +753,35 @@ Sha512HashAll (
> >    OUT  UINT8       *HashValue
> >
> >    );
> >
> >
> >
> > +/**
> >
> > +  Parallel hash function ParallelHash256, as defined in NIST's Special
> Publication
> > 800-185,
> >
> > +  published December 2016.
> >
> > +
> >
> > +  @param[in]   Input            Pointer to the input message (X).
> >
> > +  @param[in]   InputByteLen     The number(>0) of input bytes provided for the
> > input data.
> >
> > +  @param[in]   BlockSize        The size of each block (B).
> >
> > +  @param[out]  Output           Pointer to the output buffer.
> >
> > +  @param[in]   OutputByteLen    The desired number of output bytes (L).
> >
> > +  @param[in]   Customization    Pointer to the customization string (S).
> >
> > +  @param[in]   CustomByteLen    The length of the customization string in
> bytes.
> >
> > +
> >
> > +  @retval TRUE   ParallelHash256 digest computation succeeded.
> >
> > +  @retval FALSE  ParallelHash256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +ParallelHash256HashAll (
> >
> > +  IN CONST VOID   *Input,
> >
> > +  IN       UINTN  InputByteLen,
> >
> > +  IN       UINTN  BlockSize,
> >
> > +  OUT      VOID   *Output,
> >
> > +  IN       UINTN  OutputByteLen,
> >
> > +  IN CONST VOID   *Customization,
> >
> > +  IN       UINTN  CustomByteLen
> >
> > +  );
> >
> > +
> >
> >  /**
> >
> >    Retrieves the size, in bytes, of the context buffer required for SM3 hash
> > operations.
> >
> >
> >
> > diff --git a/CryptoPkg/Include/Pcd/PcdCryptoServiceFamilyEnable.h
> > b/CryptoPkg/Include/Pcd/PcdCryptoServiceFamilyEnable.h
> > index 5186a54759ae..0b30a821bc16 100644
> > --- a/CryptoPkg/Include/Pcd/PcdCryptoServiceFamilyEnable.h
> > +++ b/CryptoPkg/Include/Pcd/PcdCryptoServiceFamilyEnable.h
> > @@ -2,7 +2,7 @@
> >    Defines the PCD_CRYPTO_SERVICE_FAMILY_ENABLE structure associated
> with
> >
> >    gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.
> >
> >
> >
> > -  Copyright (c) 2019 - 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +  Copyright (c) 2019 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >    SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >
> >
> >  **/
> >
> > @@ -172,6 +172,12 @@ typedef struct {
> >      } Services;
> >
> >      UINT32    Family;
> >
> >    } Sha512;
> >
> > +  union {
> >
> > +    struct {
> >
> > +      UINT8    HashAll : 1;
> >
> > +    } Services;
> >
> > +    UINT32    Family;
> >
> > +  } ParallelHash;
> >
> >    union {
> >
> >      struct {
> >
> >        UINT8    GetSubjectName             : 1;
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
> > b/CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
> > index 49703fa4c963..15cf3dab105c 100644
> > --- a/CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
> > +++ b/CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
> > @@ -6,7 +6,7 @@
> >  #  This external input must be validated carefully to avoid security issues such
> as
> >
> >  #  buffer overflow or integer overflow.
> >
> >  #
> >
> > -#  Copyright (c) 2009 - 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +#  Copyright (c) 2009 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  #  Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights
> > reserved.<BR>
> >
> >  #  SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >  #
> >
> > @@ -34,6 +34,7 @@
> >    Hash/CryptSha256.c
> >
> >    Hash/CryptSha512.c
> >
> >    Hash/CryptSm3.c
> >
> > +  Hash/CryptParallelHashNull.c
> >
> >    Hmac/CryptHmacSha256.c
> >
> >    Kdf/CryptHkdf.c
> >
> >    Cipher/CryptAes.c
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.h
> > b/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.h
> > new file mode 100644
> > index 000000000000..fe08d4928e8d
> > --- /dev/null
> > +++ b/CryptoPkg/Library/BaseCryptLib/Hash/CryptParallelHash.h
> > @@ -0,0 +1,201 @@
> > +/** @file
> >
> > +  ParallelHash related function and type declaration.
> >
> > +
> >
> > +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +
> >
> > +Copyright 2022 The OpenSSL Project Authors. All Rights Reserved.
> >
> > +Licensed under the OpenSSL license (the "License").  You may not use
> >
> > +this file except in compliance with the License.  You can obtain a copy
> >
> > +in the file LICENSE in the source distribution or at
> >
> > +https://www.openssl.org/source/license.html
> >
> > +
> >
> > +Copyright 2022 The eXtended Keccak Code Package (XKCP)
> >
> > +https://github.com/XKCP/XKCP
> >
> > +Keccak, designed by Guido Bertoni, Joan Daemen, Michael Peeters and Gilles
> > Van Assche.
> >
> > +Implementation by the designers, hereby denoted as "the implementer".
> >
> > +For more information, feedback or questions, please refer to the Keccak
> Team
> > website:
> >
> > +https://keccak.team/
> >
> > +To the extent possible under law, the implementer has waived all copyright
> >
> > +and related or neighboring rights to the source code in this file.
> >
> > +http://creativecommons.org/publicdomain/zero/1.0/
> >
> > +**/
> >
> > +
> >
> > +#include "InternalCryptLib.h"
> >
> > +
> >
> > +#define KECCAK1600_WIDTH  1600
> >
> > +
> >
> > +//
> >
> > +// This struct referring to m_sha3.c from opessl and modified its type name.
> >
> > +//
> >
> > +typedef struct {
> >
> > +  uint64_t         A[5][5];
> >
> > +  size_t           block_size;  /* cached ctx->digest->block_size */
> >
> > +  size_t           md_size;     /* output length, variable in XOF */
> >
> > +  size_t           num;         /* used bytes in below buffer */
> >
> > +  unsigned char    buf[KECCAK1600_WIDTH / 8 - 32];
> >
> > +  unsigned char    pad;
> >
> > +} Keccak1600_Ctx;
> >
> > +
> >
> > +/**
> >
> > +  SHA3_absorb can be called multiple times, but at each invocation
> >
> > +  largest multiple of |r| out of |len| bytes are processed. Then
> >
> > +  remaining amount of bytes is returned. This is done to spare caller
> >
> > +  trouble of calculating the largest multiple of |r|. |r| can be viewed
> >
> > +  as blocksize. It is commonly (1600 - 256*n)/8, e.g. 168, 136, 104,
> >
> > +  72, but can also be (1600 - 448)/8 = 144. All this means that message
> >
> > +  padding and intermediate sub-block buffering, byte- or bitwise, is
> >
> > +  caller's responsibility.
> >
> > +**/
> >
> > +size_t
> >
> > +SHA3_absorb (
> >
> > +  uint64_t             A[5][5],
> >
> > +  const unsigned char  *inp,
> >
> > +  size_t               len,
> >
> > +  size_t               r
> >
> > +  );
> >
> > +
> >
> > +/**
> >
> > +  SHA3_squeeze is called once at the end to generate |out| hash value
> >
> > +  of |len| bytes.
> >
> > +**/
> >
> > +void
> >
> > +SHA3_squeeze (
> >
> > +  uint64_t       A[5][5],
> >
> > +  unsigned char  *out,
> >
> > +  size_t         len,
> >
> > +  size_t         r
> >
> > +  );
> >
> > +
> >
> > +/**
> >
> > +  Encode function from XKCP.
> >
> > +
> >
> > +  Encodes the input as a byte string in a way that can be unambiguously
> parsed
> >
> > +  from the beginning of the string by inserting the length of the byte string
> >
> > +  before the byte string representation of input.
> >
> > +
> >
> > +  @param[out] EncBuf  Result of left encode.
> >
> > +  @param[in]  Value   Input of left encode.
> >
> > +
> >
> > +  @retval EncLen  Size of encode result in bytes.
> >
> > +**/
> >
> > +UINTN
> >
> > +EFIAPI
> >
> > +LeftEncode (
> >
> > +  OUT UINT8  *EncBuf,
> >
> > +  IN  UINTN  Value
> >
> > +  );
> >
> > +
> >
> > +/**
> >
> > +  Encode function from XKCP.
> >
> > +
> >
> > +  Encodes the input as a byte string in a way that can be unambiguously
> parsed
> >
> > +  from the end of the string by inserting the length of the byte string after
> >
> > +  the byte string representation of input.
> >
> > +
> >
> > +  @param[out] EncBuf  Result of right encode.
> >
> > +  @param[in]  Value   Input of right encode.
> >
> > +
> >
> > +  @retval EncLen  Size of encode result in bytes.
> >
> > +**/
> >
> > +UINTN
> >
> > +EFIAPI
> >
> > +RightEncode (
> >
> > +  OUT UINT8  *EncBuf,
> >
> > +  IN  UINTN  Value
> >
> > +  );
> >
> > +
> >
> > +/**
> >
> > +  Keccak initial fuction.
> >
> > +
> >
> > +  Set up state with specified capacity.
> >
> > +
> >
> > +  @param[out] Context           Pointer to the context being initialized.
> >
> > +  @param[in]  Pad               Delimited Suffix.
> >
> > +  @param[in]  BlockSize         Size of context block.
> >
> > +  @param[in]  MessageDigestLen  Size of message digest in bytes.
> >
> > +
> >
> > +  @retval 1  Initialize successfully.
> >
> > +  @retval 0  Fail to initialize.
> >
> > +**/
> >
> > +UINT8
> >
> > +EFIAPI
> >
> > +KeccakInit (
> >
> > +  OUT Keccak1600_Ctx  *Context,
> >
> > +  IN  UINT8           Pad,
> >
> > +  IN  UINTN           BlockSize,
> >
> > +  IN  UINTN           MessageDigstLen
> >
> > +  );
> >
> > +
> >
> > +/**
> >
> > +  Sha3 update fuction.
> >
> > +
> >
> > +  This function performs Sha3 digest on a data buffer of the specified size.
> >
> > +  It can be called multiple times to compute the digest of long or
> discontinuous
> > data streams.
> >
> > +
> >
> > +  @param[in,out] Context   Pointer to the Keccak context.
> >
> > +  @param[in]     Data      Pointer to the buffer containing the data to be
> hashed.
> >
> > +  @param[in]     DataSize  Size of Data buffer in bytes.
> >
> > +
> >
> > +  @retval 1  Update successfully.
> >
> > +**/
> >
> > +UINT8
> >
> > +EFIAPI
> >
> > +Sha3Update (
> >
> > +  IN OUT Keccak1600_Ctx  *Context,
> >
> > +  IN const VOID          *Data,
> >
> > +  IN UINTN               DataSize
> >
> > +  );
> >
> > +
> >
> > +/**
> >
> > +  Completes computation of Sha3 message digest.
> >
> > +
> >
> > +  This function completes sha3 hash computation and retrieves the digest
> value
> > into
> >
> > +  the specified memory. After this function has been called, the keccak
> context
> > cannot
> >
> > +  be used again.
> >
> > +
> >
> > +  @param[in, out]  Context        Pointer to the keccak context.
> >
> > +  @param[out]      MessageDigest  Pointer to a buffer that receives the
> > message digest.
> >
> > +
> >
> > +  @retval 1   Meaasge digest computation succeeded.
> >
> > +**/
> >
> > +UINT8
> >
> > +EFIAPI
> >
> > +Sha3Final (
> >
> > +  IN OUT Keccak1600_Ctx  *Context,
> >
> > +  OUT    UINT8           *MessageDigest
> >
> > +  );
> >
> > +
> >
> > +/**
> >
> > +  Computes the CSHAKE-256 message digest of a input data buffer.
> >
> > +
> >
> > +  This function performs the CSHAKE-256 message digest of a given data
> buffer,
> > and places
> >
> > +  the digest value into the specified memory.
> >
> > +
> >
> > +  @param[in]   Data               Pointer to the buffer containing the data to be
> > hashed.
> >
> > +  @param[in]   DataSize           Size of Data buffer in bytes.
> >
> > +  @param[in]   OutputLen          Size of output in bytes.
> >
> > +  @param[in]   Name               Pointer to the function name string.
> >
> > +  @param[in]   NameLen            Size of the function name in bytes.
> >
> > +  @param[in]   Customization      Pointer to the customization string.
> >
> > +  @param[in]   CustomizationLen   Size of the customization string in bytes.
> >
> > +  @param[out]  HashValue          Pointer to a buffer that receives the CSHAKE-
> > 256 digest
> >
> > +                                  value.
> >
> > +
> >
> > +  @retval TRUE   CSHAKE-256 digest computation succeeded.
> >
> > +  @retval FALSE  CSHAKE-256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +BOOLEAN
> >
> > +EFIAPI
> >
> > +CShake256HashAll (
> >
> > +  IN   CONST VOID  *Data,
> >
> > +  IN   UINTN       DataSize,
> >
> > +  IN   UINTN       OutputLen,
> >
> > +  IN   CONST VOID  *Name,
> >
> > +  IN   UINTN       NameLen,
> >
> > +  IN   CONST VOID  *Customization,
> >
> > +  IN   UINTN       CustomizationLen,
> >
> > +  OUT  UINT8       *HashValue
> >
> > +  );
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
> > b/CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
> > index 0cab5f3ce36c..bf1563b06407 100644
> > --- a/CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
> > +++ b/CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
> > @@ -13,7 +13,7 @@
> >  #  PEM handler functions, and pseudorandom number generator functions are
> > not
> >
> >  #  supported in this instance.
> >
> >  #
> >
> > -#  Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +#  Copyright (c) 2010 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  #  SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >  #
> >
> >  ##
> >
> > @@ -40,6 +40,7 @@
> >    Hash/CryptSha256.c
> >
> >    Hash/CryptSm3.c
> >
> >    Hash/CryptSha512.c
> >
> > +  Hash/CryptParallelHashNull.c
> >
> >    Hmac/CryptHmacSha256.c
> >
> >    Kdf/CryptHkdf.c
> >
> >    Cipher/CryptAesNull.c
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
> > b/CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
> > index fdbb6edfd23e..6742da0be4fe 100644
> > --- a/CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
> > +++ b/CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
> > @@ -11,7 +11,7 @@
> >  #  functions, PKCS#7 SignedData sign functions, Diffie-Hellman functions, and
> >
> >  #  authenticode signature verification functions are not supported in this
> > instance.
> >
> >  #
> >
> > -#  Copyright (c) 2009 - 2021, Intel Corporation. All rights reserved.<BR>
> >
> > +#  Copyright (c) 2009 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  #  Copyright (c) 2021, Hewlett Packard Enterprise Development LP. All rights
> > reserved.<BR>
> >
> >  #  SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >  #
> >
> > @@ -40,6 +40,7 @@
> >    Hash/CryptSha256.c
> >
> >    Hash/CryptSm3.c
> >
> >    Hash/CryptSha512.c
> >
> > +  Hash/CryptParallelHashNull.c
> >
> >    Hmac/CryptHmacSha256.c
> >
> >    Kdf/CryptHkdf.c
> >
> >    Cipher/CryptAes.c
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf
> > b/CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf
> > index e6470d7a2127..8f39517f78b7 100644
> > --- a/CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf
> > +++ b/CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf
> > @@ -10,7 +10,7 @@
> >  #  RSA external functions, PKCS#7 SignedData sign functions, Diffie-Hellman
> > functions, and
> >
> >  #  authenticode signature verification functions are not supported in this
> > instance.
> >
> >  #
> >
> > -#  Copyright (c) 2010 - 2021, Intel Corporation. All rights reserved.<BR>
> >
> > +#  Copyright (c) 2010 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  #  SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >  #
> >
> >  ##
> >
> > @@ -38,6 +38,10 @@
> >    Hash/CryptSha256.c
> >
> >    Hash/CryptSm3.c
> >
> >    Hash/CryptSha512.c
> >
> > +  Hash/CryptSha3.c
> >
> > +  Hash/CryptXkcp.c
> >
> > +  Hash/CryptCShake256.c
> >
> > +  Hash/CryptParallelHash.c
> >
> >    Hmac/CryptHmacSha256.c
> >
> >    Kdf/CryptHkdfNull.c
> >
> >    Cipher/CryptAes.c
> >
> > @@ -85,6 +89,8 @@
> >    OpensslLib
> >
> >    IntrinsicLib
> >
> >    PrintLib
> >
> > +  MmServicesTableLib
> >
> > +  SynchronizationLib
> >
> >
> >
> >  #
> >
> >  # Remove these [BuildOptions] after this library is cleaned up
> >
> > diff --git a/CryptoPkg/Library/BaseCryptLibNull/BaseCryptLibNull.inf
> > b/CryptoPkg/Library/BaseCryptLibNull/BaseCryptLibNull.inf
> > index faf959827b90..63d1d82d1914 100644
> > --- a/CryptoPkg/Library/BaseCryptLibNull/BaseCryptLibNull.inf
> > +++ b/CryptoPkg/Library/BaseCryptLibNull/BaseCryptLibNull.inf
> > @@ -6,7 +6,7 @@
> >  #  This external input must be validated carefully to avoid security issues such
> as
> >
> >  #  buffer overflow or integer overflow.
> >
> >  #
> >
> > -#  Copyright (c) 2009 - 2020, Intel Corporation. All rights reserved.<BR>
> >
> > +#  Copyright (c) 2009 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  #  Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights
> > reserved.<BR>
> >
> >  #  SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >  #
> >
> > @@ -34,6 +34,7 @@
> >    Hash/CryptSha256Null.c
> >
> >    Hash/CryptSha512Null.c
> >
> >    Hash/CryptSm3Null.c
> >
> > +  Hash/CryptParallelHashNull.c
> >
> >    Hmac/CryptHmacSha256Null.c
> >
> >    Kdf/CryptHkdfNull.c
> >
> >    Cipher/CryptAesNull.c
> >
> > diff --git a/CryptoPkg/Library/Include/CrtLibSupport.h
> > b/CryptoPkg/Library/Include/CrtLibSupport.h
> > index d257dca8fa9b..b76b140a7acf 100644
> > --- a/CryptoPkg/Library/Include/CrtLibSupport.h
> > +++ b/CryptoPkg/Library/Include/CrtLibSupport.h
> > @@ -2,7 +2,7 @@
> >    Root include file of C runtime library to support building the third-party
> >
> >    cryptographic library.
> >
> >
> >
> > -Copyright (c) 2010 - 2021, Intel Corporation. All rights reserved.<BR>
> >
> > +Copyright (c) 2010 - 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights
> > reserved.<BR>
> >
> >  SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >
> >
> > @@ -111,6 +111,7 @@ typedef UINT8   u_char;
> >  typedef UINT32  uid_t;
> >
> >  typedef UINT32  gid_t;
> >
> >  typedef CHAR16  wchar_t;
> >
> > +typedef UINT64  uint64_t;
> >
> >
> >
> >  //
> >
> >  // File operations are not required for EFI building,
> >
> > diff --git a/CryptoPkg/Private/Protocol/Crypto.h
> > b/CryptoPkg/Private/Protocol/Crypto.h
> > index e378a8a8c60e..d51fc4a0e2cc 100644
> > --- a/CryptoPkg/Private/Protocol/Crypto.h
> > +++ b/CryptoPkg/Private/Protocol/Crypto.h
> > @@ -1905,6 +1905,35 @@ BOOLEAN
> >    OUT  UINT8       *HashValue
> >
> >    );
> >
> >
> >
> > +/**
> >
> > +  Parallel hash function ParallelHash256, as defined in NIST's Special
> Publication
> > 800-185,
> >
> > +  published December 2016.
> >
> > +
> >
> > +  @param[in]   Input            Pointer to the input message (X).
> >
> > +  @param[in]   InputByteLen     The number(>0) of input bytes provided for the
> > input data.
> >
> > +  @param[in]   BlockSize        The size of each block (B).
> >
> > +  @param[out]  Output           Pointer to the output buffer.
> >
> > +  @param[in]   OutputByteLen    The desired number of output bytes (L).
> >
> > +  @param[in]   Customization    Pointer to the customization string (S).
> >
> > +  @param[in]   CustomByteLen    The length of the customization string in
> bytes.
> >
> > +
> >
> > +  @retval TRUE   ParallelHash256 digest computation succeeded.
> >
> > +  @retval FALSE  ParallelHash256 digest computation failed.
> >
> > +  @retval FALSE  This interface is not supported.
> >
> > +
> >
> > +**/
> >
> > +typedef
> >
> > +BOOLEAN
> >
> > +(EFIAPI *EDKII_CRYPTO_PARALLEL_HASH_ALL)(
> >
> > +  IN CONST VOID   *Input,
> >
> > +  IN       UINTN  InputByteLen,
> >
> > +  IN       UINTN  BlockSize,
> >
> > +  OUT      VOID   *Output,
> >
> > +  IN       UINTN  OutputByteLen,
> >
> > +  IN CONST VOID   *Customization,
> >
> > +  IN       UINTN  CustomByteLen
> >
> > +  );
> >
> > +
> >
> >  // ----------------------------------------------------------------------------
> >
> >  // X509
> >
> >  // ----------------------------------------------------------------------------
> >
> > @@ -3560,6 +3589,8 @@ struct _EDKII_CRYPTO_PROTOCOL {
> >    EDKII_CRYPTO_SHA512_UPDATE                         Sha512Update;
> >
> >    EDKII_CRYPTO_SHA512_FINAL                          Sha512Final;
> >
> >    EDKII_CRYPTO_SHA512_HASH_ALL                       Sha512HashAll;
> >
> > +  /// Parallel hash
> >
> > +  EDKII_CRYPTO_PARALLEL_HASH_ALL                     ParallelHash256HashAll;
> >
> >    /// X509
> >
> >    EDKII_CRYPTO_X509_GET_SUBJECT_NAME                 X509GetSubjectName;
> >
> >    EDKII_CRYPTO_X509_GET_COMMON_NAME
> X509GetCommonName;
> >
> > diff --git a/CryptoPkg/Test/CryptoPkgHostUnitTest.dsc
> > b/CryptoPkg/Test/CryptoPkgHostUnitTest.dsc
> > index ff0af36bcc80..ba6e1edb6015 100644
> > --- a/CryptoPkg/Test/CryptoPkgHostUnitTest.dsc
> > +++ b/CryptoPkg/Test/CryptoPkgHostUnitTest.dsc
> > @@ -21,6 +21,9 @@
> >  [LibraryClasses]
> >
> >    OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
> >
> >    BaseCryptLib|CryptoPkg/Library/BaseCryptLib/UnitTestHostBaseCryptLib.inf
> >
> > +
> >
> MmServicesTableLib|MdePkg/Library/MmServicesTableLib/MmServicesTableLib
> > .inf
> >
> > +
> >
> SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizati
> > onLib.inf
> >
> > +
> >
> TimerLib|MdePkg/Library/BaseTimerLibNullTemplate/BaseTimerLibNullTemplat
> > e.inf
> >
> >
> >
> >  [LibraryClasses.AARCH64, LibraryClasses.ARM]
> >
> >    RngLib|MdePkg/Library/BaseRngLibNull/BaseRngLibNull.inf
> >
> > diff --git
> > a/CryptoPkg/Test/UnitTest/Library/BaseCryptLib/TestBaseCryptLibHost.inf
> > b/CryptoPkg/Test/UnitTest/Library/BaseCryptLib/TestBaseCryptLibHost.inf
> > index 00c869265080..399db596c2d1 100644
> > --- a/CryptoPkg/Test/UnitTest/Library/BaseCryptLib/TestBaseCryptLibHost.inf
> > +++
> b/CryptoPkg/Test/UnitTest/Library/BaseCryptLib/TestBaseCryptLibHost.inf
> > @@ -2,6 +2,7 @@
> >  # Host-based UnitTest for BaseCryptLib
> >
> >  #
> >
> >  # Copyright (c) Microsoft Corporation.<BR>
> >
> > +# Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
> >
> >  # SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >  ##
> >
> >
> >
> > @@ -35,6 +36,7 @@
> >    Pkcs7EkuTests.c
> >
> >    OaepEncryptTests.c
> >
> >    RsaPssTests.c
> >
> > +  ParallelhashTests.c
> >
> >
> >
> >  [Packages]
> >
> >    MdePkg/MdePkg.dec
> >
> > @@ -45,3 +47,5 @@
> >    DebugLib
> >
> >    BaseCryptLib
> >
> >    UnitTestLib
> >
> > +  MmServicesTableLib
> >
> > +  SynchronizationLib
> >
> > --
> > 2.26.2.windows.1
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#87382): https://edk2.groups.io/g/devel/message/87382
> > Mute This Topic: https://groups.io/mt/89658124/1772286
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub [jiewen.yao@intel.com]
> > -=-=-=-=-=-=
> >