* [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
@ 2021-04-04 9:40 Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 1/4] MinPlatformPkg: Add VariableReadLib Nate DeSimone
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Nate DeSimone @ 2021-04-04 9:40 UTC (permalink / raw)
To: devel; +Cc: Chasel Chiu, Liming Gao, Eric Dong, Michael Kubacki, Isaac Oram
Changes from V1:
- Changed prefix from "Min" to "VarLib"
- Better comments
- Added more whitespace for readability
- Removed unused INF sections
- Better debug messages
This patch series introduces libaries that enable large data sets
to be stored using the UEFI Variable Services. At present, most
UEFI Variable Services implementations have a maximum variable
size of <=64KB. The exact value varies depending on platform.
These libaries enable a data set to use as much space as needed,
up to the remaining space in the UEFI Variable non-volatile storage.
To implement this, I have broken the problem down into two parts:
1. Phase angostic UEFI Variable access.
2. Storage of data across multiple UEFI Variables.
For the first part, I have created two new LibraryClasses:
VariableReadLib and VariableWriteLib. I have provided
implementation instances of VariableReadLib for PEI, DXE, and SMM.
For VariableWriteLib, I have provided implementation instances for
DXE and SMM. This enables code that accesses UEFI variables
to be written in a matter than is phase agnostic, so the same
code can be used in PEI, DXE, or SMM without modification.
The second part involves another two new LibaryClasses:
LargeVariableReadLib and LargeVariableWriteLib. Only one BASE
implementation is needed for both of these as the phase dependent
code was seperated out in the first piece. These libraries provide
logic to calculate the maximum size of an individual UEFI variable
and split the data into as many smaller pieces as needed to store
the entire data set in the UEFI Variable storage. They also provide
the ability to stitch the data back together when it is read.
Deleting the data will delete all variables used to store it.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Nate DeSimone (4):
MinPlatformPkg: Add VariableReadLib
MinPlatformPkg: Add VariableWriteLib
MinPlatformPkg: Add LargeVariableReadLib
MinPlatformPkg: Add LargeVariableWriteLib
.../Include/Dsc/CoreCommonLib.dsc | 6 +-
.../MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc | 12 +-
.../MinPlatformPkg/Include/Dsc/CorePeiLib.dsc | 9 +-
.../Include/Library/LargeVariableReadLib.h | 50 ++
.../Include/Library/LargeVariableWriteLib.h | 58 +++
.../Include/Library/VariableReadLib.h | 87 ++++
.../Include/Library/VariableWriteLib.h | 129 +++++
.../BaseLargeVariableReadLib.inf | 44 ++
.../LargeVariableReadLib.c | 199 ++++++++
.../BaseLargeVariableWriteLib.inf | 44 ++
.../LargeVariableWriteLib.c | 479 ++++++++++++++++++
.../DxeRuntimeVariableReadLib.c | 115 +++++
.../DxeRuntimeVariableReadLib.inf | 41 ++
.../DxeRuntimeVariableWriteLib.c | 256 ++++++++++
.../DxeRuntimeVariableWriteLib.inf | 49 ++
.../PeiVariableReadLib/PeiVariableReadLib.c | 153 ++++++
.../PeiVariableReadLib/PeiVariableReadLib.inf | 42 ++
.../SmmVariableReadCommon.c | 114 +++++
.../StandaloneMmVariableReadLib.inf | 50 ++
.../StandaloneMmVariableReadLibConstructor.c | 48 ++
.../TraditionalMmVariableReadLib.inf | 49 ++
.../TraditionalMmVariableReadLibConstructor.c | 48 ++
.../SmmVariableWriteCommon.c | 167 ++++++
.../StandaloneMmVariableWriteLib.inf | 45 ++
.../StandaloneMmVariableWriteLibConstructor.c | 48 ++
.../TraditionalMmVariableWriteLib.inf | 44 ++
...TraditionalMmVariableWriteLibConstructor.c | 48 ++
.../Intel/MinPlatformPkg/MinPlatformPkg.dsc | 4 +-
28 files changed, 2428 insertions(+), 10 deletions(-)
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
--
2.27.0.windows.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [edk2-platforms] [PATCH v2 1/4] MinPlatformPkg: Add VariableReadLib
2021-04-04 9:40 [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Nate DeSimone
@ 2021-04-04 9:40 ` Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 2/4] MinPlatformPkg: Add VariableWriteLib Nate DeSimone
` (3 subsequent siblings)
4 siblings, 0 replies; 9+ messages in thread
From: Nate DeSimone @ 2021-04-04 9:40 UTC (permalink / raw)
To: devel; +Cc: Chasel Chiu, Liming Gao, Eric Dong, Michael Kubacki, Isaac Oram
VariableReadLib is a phase agnostic libary for reading UEFI
Variables. This library provides the
MinGetVariable() and MinGetNextVariableName() APIs which
are usable PEI, DXE, and SMM.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
---
.../MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc | 10 +-
.../MinPlatformPkg/Include/Dsc/CorePeiLib.dsc | 9 +-
.../Include/Library/VariableReadLib.h | 87 ++++++++++
.../DxeRuntimeVariableReadLib.c | 115 +++++++++++++
.../DxeRuntimeVariableReadLib.inf | 41 +++++
.../PeiVariableReadLib/PeiVariableReadLib.c | 153 ++++++++++++++++++
.../PeiVariableReadLib/PeiVariableReadLib.inf | 42 +++++
.../SmmVariableReadCommon.c | 114 +++++++++++++
.../StandaloneMmVariableReadLib.inf | 50 ++++++
.../StandaloneMmVariableReadLibConstructor.c | 48 ++++++
.../TraditionalMmVariableReadLib.inf | 49 ++++++
.../TraditionalMmVariableReadLibConstructor.c | 48 ++++++
.../Intel/MinPlatformPkg/MinPlatformPkg.dsc | 3 +-
13 files changed, 761 insertions(+), 8 deletions(-)
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
diff --git a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc
index fa9098d525..0db1250ab7 100644
--- a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc
+++ b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc
@@ -1,7 +1,7 @@
## @file
# Platform description.
#
-# Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2017 - 2021, Intel Corporation. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -11,7 +11,7 @@
#
# Generic EDKII Lib
#
-
+
#
# DXE phase common
#
@@ -23,7 +23,7 @@
ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
HstiLib|MdePkg/Library/DxeHstiLib/DxeHstiLib.inf
-
+
LockBoxLib|MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.inf
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
@@ -46,6 +46,9 @@
VmgExitLib|UefiCpuPkg/Library/VmgExitLibNull/VmgExitLibNull.inf
+[LibraryClasses.common.DXE_CORE, LibraryClasses.common.DXE_DRIVER, LibraryClasses.common.DXE_RUNTIME_DRIVER, LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION]
+ VariableReadLib|MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
+
[LibraryClasses.common.DXE_CORE]
HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
@@ -89,6 +92,7 @@
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf
Tcg2PhysicalPresenceLib|SecurityPkg/Library/SmmTcg2PhysicalPresenceLib/SmmTcg2PhysicalPresenceLib.inf
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf
+ VariableReadLib|MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
[LibraryClasses.common.SMM_CORE]
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
diff --git a/Platform/Intel/MinPlatformPkg/Include/Dsc/CorePeiLib.dsc b/Platform/Intel/MinPlatformPkg/Include/Dsc/CorePeiLib.dsc
index 2bcaed05a1..d64873ac6d 100644
--- a/Platform/Intel/MinPlatformPkg/Include/Dsc/CorePeiLib.dsc
+++ b/Platform/Intel/MinPlatformPkg/Include/Dsc/CorePeiLib.dsc
@@ -1,7 +1,7 @@
## @file
# Platform description.
#
-# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2017 - 2021, Intel Corporation. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -10,11 +10,11 @@
#
# Generic EDKII Lib
#
-
+
#
# PEI phase common
#
-
+
[LibraryClasses.common.SEC,LibraryClasses.common.PEI_CORE,LibraryClasses.common.PEIM]
S3BootScriptLib|MdePkg/Library/BaseS3BootScriptLibNull/BaseS3BootScriptLibNull.inf
PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
@@ -52,7 +52,7 @@
!if gMinPlatformPkgTokenSpaceGuid.PcdPerformanceEnable == TRUE
PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
!endif
-
+
[LibraryClasses.common.PEIM]
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
TimerLib|PcAtChipsetPkg/Library/AcpiTimerLib/PeiAcpiTimerLib.inf
@@ -70,3 +70,4 @@
!if gMinPlatformPkgTokenSpaceGuid.PcdPerformanceEnable == TRUE
PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
!endif
+ VariableReadLib|MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
diff --git a/Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h b/Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
new file mode 100644
index 0000000000..6ff762a960
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
@@ -0,0 +1,87 @@
+/** @file
+ Variable Read Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables. For example, the PEI implementation of this
+ library uses EFI_PEI_READ_ONLY_VARIABLE2_PPI. The DXE implementation accesses
+ the UEFI Runtime Services Table, and the SMM implementation uses
+ EFI_SMM_VARIABLE_PROTOCOL.
+
+ Using this library allows code to be written in a generic manner that can be
+ used in PEI, DXE, or SMM without modification.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+/**
+ Returns the value of a variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's
+ variable.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[out] Attributes If not NULL, a pointer to the memory location to return the
+ attributes bitmask for the variable.
+ @param[in, out] DataSize On input, the size in bytes of the return Data buffer.
+ On output the size of data returned in Data.
+ @param[out] Data The buffer to return the contents of the variable. May be NULL
+ with a zero DataSize in order to determine the size buffer needed.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is NULL.
+ @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ OUT UINT32 *Attributes, OPTIONAL
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ );
+
+/**
+ Enumerates the current variable names.
+
+ @param[in, out] VariableNameSize The size of the VariableName buffer. The size must be large
+ enough to fit input string supplied in VariableName buffer.
+ @param[in, out] VariableName On input, supplies the last VariableName that was returned
+ by GetNextVariableName(). On output, returns the Nullterminated
+ string of the current variable.
+ @param[in, out] VendorGuid On input, supplies the last VendorGuid that was returned by
+ GetNextVariableName(). On output, returns the
+ VendorGuid of the current variable.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The next variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result.
+ VariableNameSize has been updated with the size needed to complete the request.
+ @retval EFI_INVALID_PARAMETER VariableNameSize is NULL.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER The input values of VariableName and VendorGuid are not a name and
+ GUID of an existing variable.
+ @retval EFI_INVALID_PARAMETER Null-terminator is not found in the first VariableNameSize bytes of
+ the input VariableName buffer.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetNextVariableName (
+ IN OUT UINTN *VariableNameSize,
+ IN OUT CHAR16 *VariableName,
+ IN OUT EFI_GUID *VendorGuid
+ );
diff --git a/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
new file mode 100644
index 0000000000..f611891d6a
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
@@ -0,0 +1,115 @@
+/** @file
+ DXE Variable Read Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables. For example, the PEI implementation of this
+ library uses EFI_PEI_READ_ONLY_VARIABLE2_PPI. The DXE implementation accesses
+ the UEFI Runtime Services Table, and the SMM implementation uses
+ EFI_SMM_VARIABLE_PROTOCOL.
+
+ Using this library allows code to be written in a generic manner that can be
+ used in PEI, DXE, or SMM without modification.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi.h>
+
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+/**
+ Returns the value of a variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's
+ variable.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[out] Attributes If not NULL, a pointer to the memory location to return the
+ attributes bitmask for the variable.
+ @param[in, out] DataSize On input, the size in bytes of the return Data buffer.
+ On output the size of data returned in Data.
+ @param[out] Data The buffer to return the contents of the variable. May be NULL
+ with a zero DataSize in order to determine the size buffer needed.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is NULL.
+ @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ OUT UINT32 *Attributes, OPTIONAL
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (gRT != NULL) {
+ Status = gRT->GetVariable (
+ VariableName,
+ VendorGuid,
+ Attributes,
+ DataSize,
+ Data
+ );
+ }
+ return Status;
+}
+
+/**
+ Enumerates the current variable names.
+
+ @param[in, out] VariableNameSize The size of the VariableName buffer. The size must be large
+ enough to fit input string supplied in VariableName buffer.
+ @param[in, out] VariableName On input, supplies the last VariableName that was returned
+ by GetNextVariableName(). On output, returns the Nullterminated
+ string of the current variable.
+ @param[in, out] VendorGuid On input, supplies the last VendorGuid that was returned by
+ GetNextVariableName(). On output, returns the
+ VendorGuid of the current variable.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The next variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result.
+ VariableNameSize has been updated with the size needed to complete the request.
+ @retval EFI_INVALID_PARAMETER VariableNameSize is NULL.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER The input values of VariableName and VendorGuid are not a name and
+ GUID of an existing variable.
+ @retval EFI_INVALID_PARAMETER Null-terminator is not found in the first VariableNameSize bytes of
+ the input VariableName buffer.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetNextVariableName (
+ IN OUT UINTN *VariableNameSize,
+ IN OUT CHAR16 *VariableName,
+ IN OUT EFI_GUID *VendorGuid
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (gRT != NULL) {
+ Status = gRT->GetNextVariableName (
+ VariableNameSize,
+ VariableName,
+ VendorGuid
+ );
+ }
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
new file mode 100644
index 0000000000..848b76344b
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
@@ -0,0 +1,41 @@
+## @file
+# Component description file for DXE Variable Read Lib
+#
+# This library provides phase agnostic access to the UEFI Variable Services.
+# This is done by implementing a wrapper on top of the phase specific mechanism
+# for reading from UEFI variables. For example, the PEI implementation of this
+# library uses EFI_PEI_READ_ONLY_VARIABLE2_PPI. The DXE implementation accesses
+# the UEFI Runtime Services Table, and the SMM implementation uses
+# EFI_SMM_VARIABLE_PROTOCOL.
+#
+# Using this library allows code to be written in a generic manner that can be
+# used in PEI, DXE, or SMM without modification.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DxeRuntimeVariableReadLib
+ FILE_GUID = 9C357AD8-2BF4-450C-9E65-C0938F6D2424
+ VERSION_STRING = 1.0
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ LIBRARY_CLASS = VariableReadLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER UEFI_APPLICATION UEFI_DRIVER
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[Sources]
+ DxeRuntimeVariableReadLib.c
+
+[LibraryClasses]
+ UefiRuntimeServicesTableLib
+
+[Protocols]
+ gEfiVariableArchProtocolGuid ## CONSUMES
+
+[Depex]
+ gEfiVariableArchProtocolGuid
diff --git a/Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c b/Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
new file mode 100644
index 0000000000..d9fbce7981
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
@@ -0,0 +1,153 @@
+/** @file
+ PEI Variable Read Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables. For example, the PEI implementation of this
+ library uses EFI_PEI_READ_ONLY_VARIABLE2_PPI. The DXE implementation accesses
+ the UEFI Runtime Services Table, and the SMM implementation uses
+ EFI_SMM_VARIABLE_PROTOCOL.
+
+ Using this library allows code to be written in a generic manner that can be
+ used in PEI, DXE, or SMM without modification.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiPei.h>
+#include <Ppi/ReadOnlyVariable2.h>
+
+#include <Library/DebugLib.h>
+#include <Library/PeiServicesLib.h>
+
+/**
+ Returns the value of a variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's
+ variable.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[out] Attributes If not NULL, a pointer to the memory location to return the
+ attributes bitmask for the variable.
+ @param[in, out] DataSize On input, the size in bytes of the return Data buffer.
+ On output the size of data returned in Data.
+ @param[out] Data The buffer to return the contents of the variable. May be NULL
+ with a zero DataSize in order to determine the size buffer needed.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is NULL.
+ @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ OUT UINT32 *Attributes, OPTIONAL
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ EFI_PEI_READ_ONLY_VARIABLE2_PPI *VariablePpi;
+
+ //
+ // Locate the variable PPI.
+ //
+ Status = PeiServicesLocatePpi (
+ &gEfiPeiReadOnlyVariable2PpiGuid,
+ 0,
+ NULL,
+ &VariablePpi
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (VariablePpi != NULL) {
+ Status = VariablePpi->GetVariable (
+ VariablePpi,
+ VariableName,
+ VendorGuid,
+ Attributes,
+ DataSize,
+ Data
+ );
+ } else {
+ Status = EFI_UNSUPPORTED;
+ }
+ return Status;
+}
+
+/**
+ Enumerates the current variable names.
+
+ @param[in, out] VariableNameSize The size of the VariableName buffer. The size must be large
+ enough to fit input string supplied in VariableName buffer.
+ @param[in, out] VariableName On input, supplies the last VariableName that was returned
+ by GetNextVariableName(). On output, returns the Nullterminated
+ string of the current variable.
+ @param[in, out] VendorGuid On input, supplies the last VendorGuid that was returned by
+ GetNextVariableName(). On output, returns the
+ VendorGuid of the current variable.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The next variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result.
+ VariableNameSize has been updated with the size needed to complete the request.
+ @retval EFI_INVALID_PARAMETER VariableNameSize is NULL.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER The input values of VariableName and VendorGuid are not a name and
+ GUID of an existing variable.
+ @retval EFI_INVALID_PARAMETER Null-terminator is not found in the first VariableNameSize bytes of
+ the input VariableName buffer.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetNextVariableName (
+ IN OUT UINTN *VariableNameSize,
+ IN OUT CHAR16 *VariableName,
+ IN OUT EFI_GUID *VendorGuid
+ )
+{
+ EFI_STATUS Status;
+ EFI_PEI_READ_ONLY_VARIABLE2_PPI *VariablePpi;
+
+ //
+ // Locate the variable PPI.
+ //
+ Status = PeiServicesLocatePpi (
+ &gEfiPeiReadOnlyVariable2PpiGuid,
+ 0,
+ NULL,
+ &VariablePpi
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (VariablePpi != NULL) {
+ Status = VariablePpi->NextVariableName (
+ VariablePpi,
+ VariableNameSize,
+ VariableName,
+ VendorGuid
+ );
+ } else {
+ Status = EFI_UNSUPPORTED;
+ }
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf b/Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
new file mode 100644
index 0000000000..b1d8a4b9ea
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
@@ -0,0 +1,42 @@
+## @file
+# Component description file for PEI Variable Read Lib
+#
+# This library provides phase agnostic access to the UEFI Variable Services.
+# This is done by implementing a wrapper on top of the phase specific mechanism
+# for reading from UEFI variables. For example, the PEI implementation of this
+# library uses EFI_PEI_READ_ONLY_VARIABLE2_PPI. The DXE implementation accesses
+# the UEFI Runtime Services Table, and the SMM implementation uses
+# EFI_SMM_VARIABLE_PROTOCOL.
+#
+# Using this library allows code to be written in a generic manner that can be
+# used in PEI, DXE, or SMM without modification.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeiVariableReadLib
+ FILE_GUID = C8707767-5D9D-476B-81EE-8FAFA7098224
+ VERSION_STRING = 1.0
+ MODULE_TYPE = PEIM
+ LIBRARY_CLASS = VariableReadLib|PEI_CORE PEIM
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[Sources]
+ PeiVariableReadLib.c
+
+[LibraryClasses]
+ DebugLib
+ PeiServicesLib
+
+[Ppis]
+ gEfiPeiReadOnlyVariable2PpiGuid ## CONSUMES
+
+[Depex]
+ gEfiPeiReadOnlyVariable2PpiGuid
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
new file mode 100644
index 0000000000..b663b93999
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
@@ -0,0 +1,114 @@
+/** @file
+ SMM Variable Read Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables.
+
+ This is the common implementation pieces that are shared between
+ traditional SMM and standalone MM.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+#include <Protocol/SmmVariable.h>
+
+EFI_SMM_VARIABLE_PROTOCOL *mVariableReadLibSmmVariable = NULL;
+
+/**
+ Returns the value of a variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's
+ variable.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[out] Attributes If not NULL, a pointer to the memory location to return the
+ attributes bitmask for the variable.
+ @param[in, out] DataSize On input, the size in bytes of the return Data buffer.
+ On output the size of data returned in Data.
+ @param[out] Data The buffer to return the contents of the variable. May be NULL
+ with a zero DataSize in order to determine the size buffer needed.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is NULL.
+ @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ OUT UINT32 *Attributes, OPTIONAL
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (mVariableReadLibSmmVariable != NULL) {
+ Status = mVariableReadLibSmmVariable->SmmGetVariable (
+ VariableName,
+ VendorGuid,
+ Attributes,
+ DataSize,
+ Data
+ );
+ }
+ return Status;
+}
+
+/**
+ Enumerates the current variable names.
+
+ @param[in, out] VariableNameSize The size of the VariableName buffer. The size must be large
+ enough to fit input string supplied in VariableName buffer.
+ @param[in, out] VariableName On input, supplies the last VariableName that was returned
+ by GetNextVariableName(). On output, returns the Nullterminated
+ string of the current variable.
+ @param[in, out] VendorGuid On input, supplies the last VendorGuid that was returned by
+ GetNextVariableName(). On output, returns the
+ VendorGuid of the current variable.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The next variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result.
+ VariableNameSize has been updated with the size needed to complete the request.
+ @retval EFI_INVALID_PARAMETER VariableNameSize is NULL.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER The input values of VariableName and VendorGuid are not a name and
+ GUID of an existing variable.
+ @retval EFI_INVALID_PARAMETER Null-terminator is not found in the first VariableNameSize bytes of
+ the input VariableName buffer.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibGetNextVariableName (
+ IN OUT UINTN *VariableNameSize,
+ IN OUT CHAR16 *VariableName,
+ IN OUT EFI_GUID *VendorGuid
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (mVariableReadLibSmmVariable != NULL) {
+ Status = mVariableReadLibSmmVariable->SmmGetNextVariableName (
+ VariableNameSize,
+ VariableName,
+ VendorGuid
+ );
+ }
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
new file mode 100644
index 0000000000..96a4a25fd7
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
@@ -0,0 +1,50 @@
+## @file
+# Component description file for Standalone MM Variable Read Lib
+#
+# This library provides phase agnostic access to the UEFI Variable Services.
+# This is done by implementing a wrapper on top of the phase specific mechanism
+# for reading from UEFI variables. For example, the PEI implementation of this
+# library uses EFI_PEI_READ_ONLY_VARIABLE2_PPI. The DXE implementation accesses
+# the UEFI Runtime Services Table, and the SMM implementation uses
+# EFI_SMM_VARIABLE_PROTOCOL.
+#
+# Using this library allows code to be written in a generic manner that can be
+# used in PEI, DXE, or SMM without modification.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = SmmVariableReadLib
+ FILE_GUID = 46246048-856E-4C60-9026-F15E20C03B68
+ VERSION_STRING = 1.0
+ MODULE_TYPE = MM_STANDALONE
+ PI_SPECIFICATION_VERSION = 0x00010032
+ LIBRARY_CLASS = VariableReadLib|MM_STANDALONE
+ CONSTRUCTOR = StandaloneMmVariableReadLibConstructor
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Sources]
+ SmmVariableReadCommon.c
+ StandaloneMmVariableReadLibConstructor.c
+
+[LibraryClasses]
+ DebugLib
+ MmServicesTableLib
+
+[Guids]
+
+[Protocols]
+ gEfiSmmVariableProtocolGuid ## CONSUMES
+
+[Pcd]
+
+[Depex]
+ gEfiSmmVariableProtocolGuid
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
new file mode 100644
index 0000000000..d9fb915bb4
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
@@ -0,0 +1,48 @@
+/** @file
+ Standalone MM Variable Read Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables.
+
+ This is the standalone MM specific LibraryClass constructor.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+#include <Protocol/SmmVariable.h>
+
+#include <Library/DebugLib.h>
+#include <Library/MmServicesTableLib.h>
+
+extern EFI_SMM_VARIABLE_PROTOCOL *mVariableReadLibSmmVariable;
+
+/**
+ The constructor function acquires the EFI SMM Variable Services
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the MM System Table.
+
+ @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+StandaloneMmVariableReadLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_MM_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Locate SmmVariableProtocol.
+ //
+ Status = gMmst->MmLocateProtocol (&gEfiSmmVariableProtocolGuid, NULL, (VOID **) &mVariableReadLibSmmVariable);
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
new file mode 100644
index 0000000000..39cd8371dc
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
@@ -0,0 +1,49 @@
+## @file
+# Component description file for Traditional MM Variable Read Lib
+#
+# This library provides phase agnostic access to the UEFI Variable Services.
+# This is done by implementing a wrapper on top of the phase specific mechanism
+# for reading from UEFI variables. For example, the PEI implementation of this
+# library uses EFI_PEI_READ_ONLY_VARIABLE2_PPI. The DXE implementation accesses
+# the UEFI Runtime Services Table, and the SMM implementation uses
+# EFI_SMM_VARIABLE_PROTOCOL.
+#
+# Using this library allows code to be written in a generic manner that can be
+# used in PEI, DXE, or SMM without modification.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = TraditionalMmVariableReadLib
+ FILE_GUID = 50910542-A4ED-4142-AF25-25E141C016FC
+ VERSION_STRING = 1.0
+ MODULE_TYPE = DXE_SMM_DRIVER
+ LIBRARY_CLASS = VariableReadLib|DXE_SMM_DRIVER SMM_CORE
+ CONSTRUCTOR = TraditionalMmVariableReadLibConstructor
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Sources]
+ SmmVariableReadCommon.c
+ TraditionalMmVariableReadLibConstructor.c
+
+[LibraryClasses]
+ DebugLib
+ SmmServicesTableLib
+
+[Guids]
+
+[Protocols]
+ gEfiSmmVariableProtocolGuid ## CONSUMES
+
+[Pcd]
+
+[Depex]
+ gEfiSmmVariableProtocolGuid
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
new file mode 100644
index 0000000000..5d35bedc05
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
@@ -0,0 +1,48 @@
+/** @file
+ Traditional MM Variable Read Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables.
+
+ This is the traditional SMM specific LibraryClass constructor.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi.h>
+
+#include <Protocol/SmmVariable.h>
+
+#include <Library/DebugLib.h>
+#include <Library/SmmServicesTableLib.h>
+
+extern EFI_SMM_VARIABLE_PROTOCOL *mVariableReadLibSmmVariable;
+
+/**
+ The constructor function acquires the EFI SMM Variable Services
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+TraditionalMmVariableReadLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Locate SmmVariableProtocol.
+ //
+ Status = gSmst->SmmLocateProtocol (&gEfiSmmVariableProtocolGuid, NULL, (VOID **) &mVariableReadLibSmmVariable);
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
index 998ee79095..18b5c6f5b1 100644
--- a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
+++ b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
@@ -1,7 +1,7 @@
## @file
# Platform description.
#
-# Copyright (c) 2017 - 2020, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2017 - 2021, Intel Corporation. All rights reserved.<BR>
# Copyright (c) Microsoft Corporation.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -120,6 +120,7 @@
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
SpiFlashCommonLib|MinPlatformPkg/Flash/Library/SpiFlashCommonLibNull/SpiFlashCommonLibNull.inf
StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
+ VariableReadLib|MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
###################################################################################################
#
--
2.27.0.windows.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [edk2-platforms] [PATCH v2 2/4] MinPlatformPkg: Add VariableWriteLib
2021-04-04 9:40 [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 1/4] MinPlatformPkg: Add VariableReadLib Nate DeSimone
@ 2021-04-04 9:40 ` Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 3/4] MinPlatformPkg: Add LargeVariableReadLib Nate DeSimone
` (2 subsequent siblings)
4 siblings, 0 replies; 9+ messages in thread
From: Nate DeSimone @ 2021-04-04 9:40 UTC (permalink / raw)
To: devel; +Cc: Chasel Chiu, Liming Gao, Eric Dong, Michael Kubacki, Isaac Oram
VariableWriteLib is a phase agnostic library for writing
to UEFI Variables. This library provides the MinSetVariable(),
MinQueryVariableInfo(), MinIsVariableRequestToLockSupported(),
and MinVariableRequestToLock() APIs which are usable in DXE
and SMM.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
---
.../MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc | 2 +
.../Include/Library/VariableWriteLib.h | 129 +++++++++
.../DxeRuntimeVariableWriteLib.c | 256 ++++++++++++++++++
.../DxeRuntimeVariableWriteLib.inf | 49 ++++
.../SmmVariableWriteCommon.c | 167 ++++++++++++
.../StandaloneMmVariableWriteLib.inf | 45 +++
.../StandaloneMmVariableWriteLibConstructor.c | 48 ++++
.../TraditionalMmVariableWriteLib.inf | 44 +++
...TraditionalMmVariableWriteLibConstructor.c | 48 ++++
.../Intel/MinPlatformPkg/MinPlatformPkg.dsc | 1 +
10 files changed, 789 insertions(+)
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
diff --git a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc
index 0db1250ab7..57847e6a4d 100644
--- a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc
+++ b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc
@@ -48,6 +48,7 @@
[LibraryClasses.common.DXE_CORE, LibraryClasses.common.DXE_DRIVER, LibraryClasses.common.DXE_RUNTIME_DRIVER, LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION]
VariableReadLib|MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
+ VariableWriteLib|MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
[LibraryClasses.common.DXE_CORE]
HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
@@ -93,6 +94,7 @@
Tcg2PhysicalPresenceLib|SecurityPkg/Library/SmmTcg2PhysicalPresenceLib/SmmTcg2PhysicalPresenceLib.inf
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf
VariableReadLib|MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
+ VariableWriteLib|MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
[LibraryClasses.common.SMM_CORE]
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
diff --git a/Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h b/Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
new file mode 100644
index 0000000000..c52aec93ec
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
@@ -0,0 +1,129 @@
+/** @file
+ Variable Write Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for writing to UEFI variables. For example, the DXE implementation accesses
+ the UEFI Runtime Services Table, and the SMM implementation uses
+ EFI_SMM_VARIABLE_PROTOCOL.
+
+ Using this library allows code to be written in a generic manner that can be
+ used in DXE or SMM without modification.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+/**
+ Sets the value of a variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's variable.
+ Each VariableName is unique for each VendorGuid. VariableName must
+ contain 1 or more characters. If VariableName is an empty string,
+ then EFI_INVALID_PARAMETER is returned.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[in] Attributes Attributes bitmask to set for the variable.
+ @param[in] DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE or
+ EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero
+ causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is
+ set, then a SetVariable() call with a DataSize of zero will not cause any change to
+ the variable value (the timestamp associated with the variable may be updated however
+ even if no new data value is provided,see the description of the
+ EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not
+ be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated).
+ @param[in] Data The contents for the variable.
+
+ @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as
+ defined by the Attributes.
+ @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits, name, and GUID was supplied, or the
+ DataSize exceeds the maximum allowed.
+ @retval EFI_INVALID_PARAMETER VariableName is an empty string.
+ @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_WRITE_PROTECTED The variable in question is read-only.
+ @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.
+ @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS being set,
+ but the AuthInfo does NOT pass the validation check carried out by the firmware.
+
+ @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibSetVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ IN UINT32 Attributes,
+ IN UINTN DataSize,
+ IN VOID *Data
+ );
+
+/**
+ Returns information about the EFI variables.
+
+ @param[in] Attributes Attributes bitmask to specify the type of variables on
+ which to return information.
+ @param[out] MaximumVariableStorageSize On output the maximum size of the storage space
+ available for the EFI variables associated with the
+ attributes specified.
+ @param[out] RemainingVariableStorageSize Returns the remaining size of the storage space
+ available for the EFI variables associated with the
+ attributes specified.
+ @param[out] MaximumVariableSize Returns the maximum size of the individual EFI
+ variables associated with the attributes specified.
+
+ @retval EFI_SUCCESS Valid answer returned.
+ @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied
+ @retval EFI_UNSUPPORTED The attribute is not supported on this platform, and the
+ MaximumVariableStorageSize,
+ RemainingVariableStorageSize, MaximumVariableSize
+ are undefined.
+**/
+EFI_STATUS
+EFIAPI
+VarLibQueryVariableInfo (
+ IN UINT32 Attributes,
+ OUT UINT64 *MaximumVariableStorageSize,
+ OUT UINT64 *RemainingVariableStorageSize,
+ OUT UINT64 *MaximumVariableSize
+ );
+
+/**
+ Indicates if the VarLibVariableRequestToLock() API is supported by the current
+ VariableWriteLib implementation. At time of writting, this API is not
+ available in SMM or after ExitBootServices.
+
+ @retval TRUE The VarLibVariableRequestToLock() API is supported
+ @retval FALSE The VarLibVariableRequestToLock() API is not supported
+**/
+BOOLEAN
+EFIAPI
+VarLibIsVariableRequestToLockSupported (
+ VOID
+ );
+
+/**
+ Mark a variable that will become read-only after leaving the DXE phase of execution.
+ Write request coming from SMM environment through EFI_SMM_VARIABLE_PROTOCOL is allowed.
+
+ @param[in] This The EDKII_VARIABLE_LOCK_PROTOCOL instance.
+ @param[in] VariableName A pointer to the variable name that will be made read-only subsequently.
+ @param[in] VendorGuid A pointer to the vendor GUID that will be made read-only subsequently.
+
+ @retval EFI_SUCCESS The variable specified by the VariableName and the VendorGuid was marked
+ as pending to be read-only.
+ @retval EFI_INVALID_PARAMETER VariableName or VendorGuid is NULL.
+ Or VariableName is an empty string.
+ @retval EFI_ACCESS_DENIED EFI_END_OF_DXE_EVENT_GROUP_GUID or EFI_EVENT_GROUP_READY_TO_BOOT has
+ already been signaled.
+ @retval EFI_OUT_OF_RESOURCES There is not enough resource to hold the lock request.
+**/
+EFI_STATUS
+EFIAPI
+VarLibVariableRequestToLock (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid
+ );
diff --git a/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
new file mode 100644
index 0000000000..3b7f377bc2
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
@@ -0,0 +1,256 @@
+/** @file
+ DXE Variable Write Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for writing to UEFI variables. For example, the DXE implementation accesses
+ the UEFI Runtime Services Table, and the SMM implementation uses
+ EFI_SMM_VARIABLE_PROTOCOL.
+
+ Using this library allows code to be written in a generic manner that can be
+ used in DXE or SMM without modification.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi.h>
+
+#include <Guid/EventGroup.h>
+#include <Protocol/VariableLock.h>
+
+#include <Library/UefiLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+STATIC EDKII_VARIABLE_LOCK_PROTOCOL *mVariableWriteLibVariableLock = NULL;
+
+/**
+ Sets the value of a variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's variable.
+ Each VariableName is unique for each VendorGuid. VariableName must
+ contain 1 or more characters. If VariableName is an empty string,
+ then EFI_INVALID_PARAMETER is returned.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[in] Attributes Attributes bitmask to set for the variable.
+ @param[in] DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE or
+ EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero
+ causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is
+ set, then a SetVariable() call with a DataSize of zero will not cause any change to
+ the variable value (the timestamp associated with the variable may be updated however
+ even if no new data value is provided,see the description of the
+ EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not
+ be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated).
+ @param[in] Data The contents for the variable.
+
+ @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as
+ defined by the Attributes.
+ @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits, name, and GUID was supplied, or the
+ DataSize exceeds the maximum allowed.
+ @retval EFI_INVALID_PARAMETER VariableName is an empty string.
+ @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_WRITE_PROTECTED The variable in question is read-only.
+ @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.
+ @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS being set,
+ but the AuthInfo does NOT pass the validation check carried out by the firmware.
+
+ @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibSetVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ IN UINT32 Attributes,
+ IN UINTN DataSize,
+ IN VOID *Data
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (gRT != NULL) {
+ Status = gRT->SetVariable (
+ VariableName,
+ VendorGuid,
+ Attributes,
+ DataSize,
+ Data
+ );
+ }
+ return Status;
+}
+
+/**
+ Returns information about the EFI variables.
+
+ @param[in] Attributes Attributes bitmask to specify the type of variables on
+ which to return information.
+ @param[out] MaximumVariableStorageSize On output the maximum size of the storage space
+ available for the EFI variables associated with the
+ attributes specified.
+ @param[out] RemainingVariableStorageSize Returns the remaining size of the storage space
+ available for the EFI variables associated with the
+ attributes specified.
+ @param[out] MaximumVariableSize Returns the maximum size of the individual EFI
+ variables associated with the attributes specified.
+
+ @retval EFI_SUCCESS Valid answer returned.
+ @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied
+ @retval EFI_UNSUPPORTED The attribute is not supported on this platform, and the
+ MaximumVariableStorageSize,
+ RemainingVariableStorageSize, MaximumVariableSize
+ are undefined.
+**/
+EFI_STATUS
+EFIAPI
+VarLibQueryVariableInfo (
+ IN UINT32 Attributes,
+ OUT UINT64 *MaximumVariableStorageSize,
+ OUT UINT64 *RemainingVariableStorageSize,
+ OUT UINT64 *MaximumVariableSize
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (gRT != NULL) {
+ Status = gRT->QueryVariableInfo (
+ Attributes,
+ MaximumVariableStorageSize,
+ RemainingVariableStorageSize,
+ MaximumVariableSize
+ );
+ }
+ return Status;
+}
+
+/**
+ Indicates if the VarLibVariableRequestToLock() API is supported by the current
+ VariableWriteLib implementation. At time of writting, this API is not
+ available in SMM or after ExitBootServices.
+
+ @retval TRUE The VarLibVariableRequestToLock() API is supported
+ @retval FALSE The VarLibVariableRequestToLock() API is not supported
+**/
+BOOLEAN
+EFIAPI
+VarLibIsVariableRequestToLockSupported (
+ VOID
+ )
+{
+ if (mVariableWriteLibVariableLock != NULL) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Mark a variable that will become read-only after leaving the DXE phase of execution.
+ Write request coming from SMM environment through EFI_SMM_VARIABLE_PROTOCOL is allowed.
+
+ @param[in] This The EDKII_VARIABLE_LOCK_PROTOCOL instance.
+ @param[in] VariableName A pointer to the variable name that will be made read-only subsequently.
+ @param[in] VendorGuid A pointer to the vendor GUID that will be made read-only subsequently.
+
+ @retval EFI_SUCCESS The variable specified by the VariableName and the VendorGuid was marked
+ as pending to be read-only.
+ @retval EFI_INVALID_PARAMETER VariableName or VendorGuid is NULL.
+ Or VariableName is an empty string.
+ @retval EFI_ACCESS_DENIED EFI_END_OF_DXE_EVENT_GROUP_GUID or EFI_EVENT_GROUP_READY_TO_BOOT has
+ already been signaled.
+ @retval EFI_OUT_OF_RESOURCES There is not enough resource to hold the lock request.
+**/
+EFI_STATUS
+EFIAPI
+VarLibVariableRequestToLock (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (mVariableWriteLibVariableLock != NULL) {
+ Status = mVariableWriteLibVariableLock->RequestToLock (
+ mVariableWriteLibVariableLock,
+ VariableName,
+ VendorGuid
+ );
+ }
+ return Status;
+}
+
+/**
+ Exit Boot Services Event notification handler.
+
+ @param[in] Event Event whose notification function is being invoked.
+ @param[in] Context Pointer to the notification function's context.
+
+**/
+VOID
+EFIAPI
+DxeRuntimeVariableWriteLibOnExitBootServices (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ mVariableWriteLibVariableLock = NULL;
+}
+
+/**
+ The constructor function acquires the Variable Lock Protocol
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+DxeRuntimeVariableWriteLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT ExitBootServiceEvent;
+ EFI_EVENT LegacyBootEvent;
+
+ //
+ // Locate VariableLockProtocol.
+ //
+ Status = gBS->LocateProtocol (&gEdkiiVariableLockProtocolGuid, NULL, (VOID **)&mVariableWriteLibVariableLock);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Register the event to inform SMM variable that it is at runtime.
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ DxeRuntimeVariableWriteLibOnExitBootServices,
+ NULL,
+ &gEfiEventExitBootServicesGuid,
+ &ExitBootServiceEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Register the event to inform SMM variable that it is at runtime for legacy boot.
+ // Reuse OnExitBootServices() here.
+ //
+ Status = EfiCreateEventLegacyBootEx (
+ TPL_NOTIFY,
+ DxeRuntimeVariableWriteLibOnExitBootServices,
+ NULL,
+ &LegacyBootEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
new file mode 100644
index 0000000000..704a8ac7cc
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
@@ -0,0 +1,49 @@
+## @file
+# Component description file for DXE Variable Write Lib
+#
+# This library provides phase agnostic access to the UEFI Variable Services.
+# This is done by implementing a wrapper on top of the phase specific mechanism
+# for writing to UEFI variables. For example, the DXE implementation accesses
+# the UEFI Runtime Services Table, and the SMM implementation uses
+# EFI_SMM_VARIABLE_PROTOCOL.
+#
+# Using this library allows code to be written in a generic manner that can be
+# used in DXE or SMM without modification.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DxeRuntimeVariableWriteLib
+ FILE_GUID = 9681E383-5FD4-47A4-B4F8-6651EE603E4E
+ VERSION_STRING = 1.0
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ LIBRARY_CLASS = VariableWriteLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER UEFI_APPLICATION UEFI_DRIVER
+ CONSTRUCTOR = DxeRuntimeVariableWriteLibConstructor
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Sources]
+ DxeRuntimeVariableWriteLib.c
+
+[LibraryClasses]
+ DebugLib
+ UefiLib
+ UefiBootServicesTableLib
+ UefiRuntimeServicesTableLib
+
+[Guids]
+ gEfiEventExitBootServicesGuid ## CONSUMES ## Event
+
+[Protocols]
+ gEfiVariableWriteArchProtocolGuid ## CONSUMES
+ gEdkiiVariableLockProtocolGuid ## CONSUMES
+
+[Depex]
+ gEfiVariableWriteArchProtocolGuid AND gEdkiiVariableLockProtocolGuid
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
new file mode 100644
index 0000000000..e8d7d19ed1
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
@@ -0,0 +1,167 @@
+/** @file
+ SMM Variable Write Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for writing to UEFI variables.
+
+ This is the common implementation pieces that are shared between
+ traditional SMM and standalone MM.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+#include <Protocol/SmmVariable.h>
+
+EFI_SMM_VARIABLE_PROTOCOL *mVariableWriteLibSmmVariable = NULL;
+
+/**
+ Sets the value of a variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's variable.
+ Each VariableName is unique for each VendorGuid. VariableName must
+ contain 1 or more characters. If VariableName is an empty string,
+ then EFI_INVALID_PARAMETER is returned.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[in] Attributes Attributes bitmask to set for the variable.
+ @param[in] DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE or
+ EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero
+ causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is
+ set, then a SetVariable() call with a DataSize of zero will not cause any change to
+ the variable value (the timestamp associated with the variable may be updated however
+ even if no new data value is provided,see the description of the
+ EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not
+ be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated).
+ @param[in] Data The contents for the variable.
+
+ @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as
+ defined by the Attributes.
+ @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits, name, and GUID was supplied, or the
+ DataSize exceeds the maximum allowed.
+ @retval EFI_INVALID_PARAMETER VariableName is an empty string.
+ @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_WRITE_PROTECTED The variable in question is read-only.
+ @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.
+ @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS being set,
+ but the AuthInfo does NOT pass the validation check carried out by the firmware.
+
+ @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found.
+
+**/
+EFI_STATUS
+EFIAPI
+VarLibSetVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ IN UINT32 Attributes,
+ IN UINTN DataSize,
+ IN VOID *Data
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (mVariableWriteLibSmmVariable != NULL) {
+ Status = mVariableWriteLibSmmVariable->SmmSetVariable (
+ VariableName,
+ VendorGuid,
+ Attributes,
+ DataSize,
+ Data
+ );
+ }
+ return Status;
+}
+
+/**
+ Returns information about the EFI variables.
+
+ @param[in] Attributes Attributes bitmask to specify the type of variables on
+ which to return information.
+ @param[out] MaximumVariableStorageSize On output the maximum size of the storage space
+ available for the EFI variables associated with the
+ attributes specified.
+ @param[out] RemainingVariableStorageSize Returns the remaining size of the storage space
+ available for the EFI variables associated with the
+ attributes specified.
+ @param[out] MaximumVariableSize Returns the maximum size of the individual EFI
+ variables associated with the attributes specified.
+
+ @retval EFI_SUCCESS Valid answer returned.
+ @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied
+ @retval EFI_UNSUPPORTED The attribute is not supported on this platform, and the
+ MaximumVariableStorageSize,
+ RemainingVariableStorageSize, MaximumVariableSize
+ are undefined.
+**/
+EFI_STATUS
+EFIAPI
+VarLibQueryVariableInfo (
+ IN UINT32 Attributes,
+ OUT UINT64 *MaximumVariableStorageSize,
+ OUT UINT64 *RemainingVariableStorageSize,
+ OUT UINT64 *MaximumVariableSize
+ )
+{
+ EFI_STATUS Status = EFI_UNSUPPORTED;
+
+ if (mVariableWriteLibSmmVariable != NULL) {
+ Status = mVariableWriteLibSmmVariable->SmmQueryVariableInfo (
+ Attributes,
+ MaximumVariableStorageSize,
+ RemainingVariableStorageSize,
+ MaximumVariableSize
+ );
+ }
+ return Status;
+}
+
+/**
+ Indicates if the VarLibVariableRequestToLock() API is supported by the current
+ VariableWriteLib implementation. At time of writting, this API is not
+ available in SMM or after ExitBootServices.
+
+ @retval TRUE The VarLibVariableRequestToLock() API is supported
+ @retval FALSE The VarLibVariableRequestToLock() API is not supported
+**/
+BOOLEAN
+EFIAPI
+VarLibIsVariableRequestToLockSupported (
+ VOID
+ )
+{
+ return FALSE;
+}
+
+/**
+ Mark a variable that will become read-only after leaving the DXE phase of execution.
+ Write request coming from SMM environment through EFI_SMM_VARIABLE_PROTOCOL is allowed.
+
+ @param[in] This The EDKII_VARIABLE_LOCK_PROTOCOL instance.
+ @param[in] VariableName A pointer to the variable name that will be made read-only subsequently.
+ @param[in] VendorGuid A pointer to the vendor GUID that will be made read-only subsequently.
+
+ @retval EFI_SUCCESS The variable specified by the VariableName and the VendorGuid was marked
+ as pending to be read-only.
+ @retval EFI_INVALID_PARAMETER VariableName or VendorGuid is NULL.
+ Or VariableName is an empty string.
+ @retval EFI_ACCESS_DENIED EFI_END_OF_DXE_EVENT_GROUP_GUID or EFI_EVENT_GROUP_READY_TO_BOOT has
+ already been signaled.
+ @retval EFI_OUT_OF_RESOURCES There is not enough resource to hold the lock request.
+**/
+EFI_STATUS
+EFIAPI
+VarLibVariableRequestToLock (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid
+ )
+{
+ //
+ // Variable lock protocol is not accessible from SMM
+ //
+ return EFI_UNSUPPORTED;
+}
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
new file mode 100644
index 0000000000..4cafc421c4
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
@@ -0,0 +1,45 @@
+## @file
+# Component description file for Standalone MM Variable Write Lib
+#
+# This library provides phase agnostic access to the UEFI Variable Services.
+# This is done by implementing a wrapper on top of the phase specific mechanism
+# for writing to UEFI variables. For example, the DXE implementation accesses
+# the UEFI Runtime Services Table, and the SMM implementation uses
+# EFI_SMM_VARIABLE_PROTOCOL.
+#
+# Using this library allows code to be written in a generic manner that can be
+# used in DXE or SMM without modification.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = SmmVariableWriteLib
+ FILE_GUID = 62A023A6-DEBA-4407-A617-18963090DAFD
+ VERSION_STRING = 1.0
+ MODULE_TYPE = MM_STANDALONE
+ PI_SPECIFICATION_VERSION = 0x00010032
+ LIBRARY_CLASS = VariableWriteLib|MM_STANDALONE
+ CONSTRUCTOR = StandaloneMmVariableWriteLibConstructor
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Sources]
+ SmmVariableWriteCommon.c
+ StandaloneMmVariableWriteLibConstructor.c
+
+[LibraryClasses]
+ DebugLib
+ MmServicesTableLib
+
+[Protocols]
+ gEfiSmmVariableProtocolGuid ## CONSUMES
+
+[Depex]
+ gEfiSmmVariableProtocolGuid
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
new file mode 100644
index 0000000000..4493929328
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
@@ -0,0 +1,48 @@
+/** @file
+ Standalone MM Variable Write Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables.
+
+ This is the standalone MM specific LibraryClass constructor.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+#include <Protocol/SmmVariable.h>
+
+#include <Library/DebugLib.h>
+#include <Library/MmServicesTableLib.h>
+
+extern EFI_SMM_VARIABLE_PROTOCOL *mVariableWriteLibSmmVariable;
+
+/**
+ The constructor function acquires the EFI SMM Variable Services
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the MM System Table.
+
+ @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+StandaloneMmVariableWriteLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_MM_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Locate SmmVariableProtocol.
+ //
+ Status = gMmst->MmLocateProtocol (&gEfiSmmVariableProtocolGuid, NULL, (VOID **) &mVariableWriteLibSmmVariable);
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
new file mode 100644
index 0000000000..5d833b7e0f
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
@@ -0,0 +1,44 @@
+## @file
+# Component description file for Traditional MM Variable Write Lib
+#
+# This library provides phase agnostic access to the UEFI Variable Services.
+# This is done by implementing a wrapper on top of the phase specific mechanism
+# for writing to UEFI variables. For example, the DXE implementation accesses
+# the UEFI Runtime Services Table, and the SMM implementation uses
+# EFI_SMM_VARIABLE_PROTOCOL.
+#
+# Using this library allows code to be written in a generic manner that can be
+# used in DXE or SMM without modification.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = TraditionalMmVariableWriteLib
+ FILE_GUID = 8C385E9B-C260-466C-91D2-43D839712680
+ VERSION_STRING = 1.0
+ MODULE_TYPE = DXE_SMM_DRIVER
+ LIBRARY_CLASS = VariableWriteLib|DXE_SMM_DRIVER SMM_CORE
+ CONSTRUCTOR = TraditionalMmVariableWriteLibConstructor
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Sources]
+ SmmVariableWriteCommon.c
+ TraditionalMmVariableWriteLibConstructor.c
+
+[LibraryClasses]
+ DebugLib
+ SmmServicesTableLib
+
+[Protocols]
+ gEfiSmmVariableProtocolGuid ## CONSUMES
+
+[Depex]
+ gEfiSmmVariableProtocolGuid
diff --git a/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
new file mode 100644
index 0000000000..472ccc5aad
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
@@ -0,0 +1,48 @@
+/** @file
+ Traditional MM Variable Write Lib
+
+ This library provides phase agnostic access to the UEFI Variable Services.
+ This is done by implementing a wrapper on top of the phase specific mechanism
+ for reading from UEFI variables.
+
+ This is the traditional SMM specific LibraryClass constructor.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi.h>
+
+#include <Protocol/SmmVariable.h>
+
+#include <Library/DebugLib.h>
+#include <Library/SmmServicesTableLib.h>
+
+extern EFI_SMM_VARIABLE_PROTOCOL *mVariableWriteLibSmmVariable;
+
+/**
+ The constructor function acquires the EFI SMM Variable Services
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+TraditionalMmVariableWriteLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Locate SmmVariableProtocol.
+ //
+ Status = gSmst->SmmLocateProtocol (&gEfiSmmVariableProtocolGuid, NULL, (VOID **) &mVariableWriteLibSmmVariable);
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
index 18b5c6f5b1..e968ec4cb2 100644
--- a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
+++ b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
@@ -121,6 +121,7 @@
SpiFlashCommonLib|MinPlatformPkg/Flash/Library/SpiFlashCommonLibNull/SpiFlashCommonLibNull.inf
StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
VariableReadLib|MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
+ VariableWriteLib|MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
###################################################################################################
#
--
2.27.0.windows.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [edk2-platforms] [PATCH v2 3/4] MinPlatformPkg: Add LargeVariableReadLib
2021-04-04 9:40 [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 1/4] MinPlatformPkg: Add VariableReadLib Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 2/4] MinPlatformPkg: Add VariableWriteLib Nate DeSimone
@ 2021-04-04 9:40 ` Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 4/4] MinPlatformPkg: Add LargeVariableWriteLib Nate DeSimone
2021-04-05 19:26 ` [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Oram, Isaac W
4 siblings, 0 replies; 9+ messages in thread
From: Nate DeSimone @ 2021-04-04 9:40 UTC (permalink / raw)
To: devel; +Cc: Chasel Chiu, Liming Gao, Eric Dong, Michael Kubacki, Isaac Oram
LargeVariableReadLib is used to retrieve large data sets using
the UEFI Variable Services. At time of writting, most UEFI
Variable Services implementations to not allow more than 64KB
of data to be stored in a single UEFI variable. This library
will split data sets across multiple variables as needed.
It adds the GetLargeVariable() API to provide this service.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
---
.../Include/Dsc/CoreCommonLib.dsc | 5 +-
.../Include/Library/LargeVariableReadLib.h | 50 +++++
.../BaseLargeVariableReadLib.inf | 44 ++++
.../LargeVariableReadLib.c | 199 ++++++++++++++++++
4 files changed, 296 insertions(+), 2 deletions(-)
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
diff --git a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc
index cf2940cf02..5f2ad3f0f0 100644
--- a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc
+++ b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc
@@ -135,13 +135,14 @@
VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
PlatformSecureLib|SecurityPkg/Library/PlatformSecureLibNull/PlatformSecureLibNull.inf
AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
-
+
!if gMinPlatformPkgTokenSpaceGuid.PcdUefiSecureBootEnable == TRUE
AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
!endif
SafeIntLib|MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf
BmpSupportLib|MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf
+ LargeVariableReadLib|MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
#
# CryptLib
@@ -165,4 +166,4 @@
SmbusLib|MdePkg/Library/BaseSmbusLibNull/BaseSmbusLibNull.inf
VariablePolicyLib|MdeModulePkg/Library/VariablePolicyLib/VariablePolicyLib.inf
- VariablePolicyHelperLib|MdeModulePkg/Library/VariablePolicyHelperLib/VariablePolicyHelperLib.inf
\ No newline at end of file
+ VariablePolicyHelperLib|MdeModulePkg/Library/VariablePolicyHelperLib/VariablePolicyHelperLib.inf
diff --git a/Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h b/Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
new file mode 100644
index 0000000000..adcfff7a34
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
@@ -0,0 +1,50 @@
+/** @file
+ Large Variable Read Lib
+
+ This library is used to retrieve large data sets using the UEFI Variable
+ Services. At time of writing, most UEFI Variable Services implementations to
+ not allow more than 64KB of data to be stored in a single UEFI variable. This
+ library will split data sets across multiple variables as needed.
+
+ In the case where more than one variable is needed to store the data, an
+ integer number will be added to the end of the variable name. This number
+ will be incremented for each variable as needed to retrieve the entire data
+ set.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+/**
+ Returns the value of a large variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's
+ variable.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[in, out] DataSize On input, the size in bytes of the return Data buffer.
+ On output the size of data returned in Data.
+ @param[out] Data The buffer to return the contents of the variable. May be NULL
+ with a zero DataSize in order to determine the size buffer needed.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is NULL.
+ @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure.
+
+**/
+EFI_STATUS
+EFIAPI
+GetLargeVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ );
diff --git a/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
new file mode 100644
index 0000000000..d522aa84ab
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
@@ -0,0 +1,44 @@
+## @file
+# Component description file for Large Variable Read Library
+#
+# This library is used to retrieve large data sets using the UEFI Variable
+# Services. At time of writing, most UEFI Variable Services implementations to
+# not allow more than 64KB of data to be stored in a single UEFI variable. This
+# library will split data sets across multiple variables as needed.
+#
+# In the case where more than one variable is needed to store the data, an
+# integer number will be added to the end of the variable name. This number
+# will be incremented for each variable as needed to retrieve the entire data
+# set.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = BaseLargeVariableReadLib
+ FILE_GUID = 4E9D7D31-A7A0-4004-AE93-D12F1AB08730
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = LargeVariableReadLib
+
+#
+# VALID_ARCHITECTURES = IA32 X64 EBC
+#
+
+[Sources]
+ LargeVariableReadLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MinPlatformPkg/MinPlatformPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ PrintLib
+ VariableReadLib
diff --git a/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
new file mode 100644
index 0000000000..115f3aeb17
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
@@ -0,0 +1,199 @@
+/** @file
+ Large Variable Read Lib
+
+ This library is used to retrieve large data sets using the UEFI Variable
+ Services. At time of writing, most UEFI Variable Services implementations to
+ not allow more than 64KB of data to be stored in a single UEFI variable. This
+ library will split data sets across multiple variables as needed.
+
+ In the case where more than one variable is needed to store the data, an
+ integer number will be added to the end of the variable name. This number
+ will be incremented for each variable as needed to retrieve the entire data
+ set.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PrintLib.h>
+#include <Library/VariableReadLib.h>
+
+//
+// 1024 was choosen because this is the size of the SMM communication buffer
+// used by VariableDxeSmm to transfer the VariableName from DXE to SMM. Choosing
+// the same size will prevent this library from limiting variable names any
+// more than the MdeModulePkg implementation of UEFI Variable Services does.
+//
+#define MAX_VARIABLE_NAME_SIZE 1024
+
+//
+// The 2012 Windows Hardware Requirements specified a minimum variable size of
+// 32KB. By setting the maximum allowed number of variables to 0x20000, this
+// allows up to 4GB of data to be stored on most UEFI implementations in
+// existence. Older UEFI implementations were known to only provide 8KB per
+// variable. In this case, up to 1GB can be stored. Since 1GB vastly exceeds the
+// size of any known NvStorage FV, choosing this number should effectively
+// enable all available NvStorage space to be used to store the given data.
+//
+#define MAX_VARIABLE_SPLIT 131072 // 0x20000
+
+//
+// There are 6 digits in the number 131072, which means the length of the string
+// representation of this number will be at most 6 characters long.
+//
+#define MAX_VARIABLE_SPLIT_DIGITS 6
+
+/**
+ Returns the value of a large variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's
+ variable.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[in, out] DataSize On input, the size in bytes of the return Data buffer.
+ On output the size of data returned in Data.
+ @param[out] Data The buffer to return the contents of the variable. May be NULL
+ with a zero DataSize in order to determine the size buffer needed.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is NULL.
+ @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure.
+
+**/
+EFI_STATUS
+EFIAPI
+GetLargeVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ )
+{
+ CHAR16 TempVariableName[MAX_VARIABLE_NAME_SIZE];
+ EFI_STATUS Status;
+ UINTN TotalSize;
+ UINTN VarDataSize;
+ UINTN Index;
+ UINTN VariableSize;
+ UINTN BytesRemaining;
+ UINT8 *OffsetPtr;
+
+ VarDataSize = 0;
+
+ //
+ // First check if a variable with the given name exists
+ //
+ Status = VarLibGetVariable (VariableName, VendorGuid, NULL, &VarDataSize, NULL);
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+ if (*DataSize >= VarDataSize) {
+ if (Data == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+ DEBUG ((DEBUG_INFO, "GetLargeVariable: Single Variable Found\n"));
+ Status = VarLibGetVariable (VariableName, VendorGuid, NULL, DataSize, Data);
+ goto Done;
+ } else {
+ *DataSize = VarDataSize;
+ Status = EFI_BUFFER_TOO_SMALL;
+ goto Done;
+ }
+
+ } else if (Status == EFI_NOT_FOUND) {
+ //
+ // Check if the first variable of a multi-variable set exists
+ //
+ if (StrLen (VariableName) >= (MAX_VARIABLE_NAME_SIZE - MAX_VARIABLE_SPLIT_DIGITS)) {
+ DEBUG ((DEBUG_ERROR, "GetLargeVariable: Variable name too long\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ VarDataSize = 0;
+ Index = 0;
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+ Status = VarLibGetVariable (TempVariableName, VendorGuid, NULL, &VarDataSize, NULL);
+
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+ //
+ // The first variable exists. Calculate the total size of all the variables.
+ //
+ DEBUG ((DEBUG_INFO, "GetLargeVariable: Multiple Variables Found\n"));
+ TotalSize = 0;
+ for (Index = 0; Index < MAX_VARIABLE_SPLIT; Index++) {
+ VarDataSize = 0;
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+ Status = VarLibGetVariable (TempVariableName, VendorGuid, NULL, &VarDataSize, NULL);
+ if (Status != EFI_BUFFER_TOO_SMALL) {
+ break;
+ }
+ TotalSize += VarDataSize;
+ }
+ DEBUG ((DEBUG_INFO, "TotalSize = %d, NumVariables = %d\n", TotalSize, Index));
+
+ //
+ // Check if the user provided a large enough buffer
+ //
+ if (*DataSize >= TotalSize) {
+ if (Data == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+
+ //
+ // Read the data from all variables
+ //
+ OffsetPtr = (UINT8 *) Data;
+ BytesRemaining = *DataSize;
+ for (Index = 0; Index < MAX_VARIABLE_SPLIT; Index++) {
+ VarDataSize = 0;
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+ VariableSize = BytesRemaining;
+ DEBUG ((DEBUG_INFO, "Reading %s, Guid = %g,", TempVariableName, VendorGuid));
+ Status = VarLibGetVariable (TempVariableName, VendorGuid, NULL, &VariableSize, (VOID *) OffsetPtr);
+ DEBUG ((DEBUG_INFO, " Size %d\n", VariableSize));
+ if (EFI_ERROR (Status)) {
+ if (Status == EFI_NOT_FOUND) {
+ DEBUG ((DEBUG_INFO, "No more variables found\n"));
+ Status = EFI_SUCCESS; // The end has been reached
+ }
+ goto Done;
+ }
+
+ if (VariableSize < BytesRemaining) {
+ BytesRemaining -= VariableSize;
+ OffsetPtr += VariableSize;
+ } else {
+ DEBUG ((DEBUG_INFO, "All data has been read\n"));
+ BytesRemaining = 0;
+ break;
+ }
+ } //End of for loop
+
+ goto Done;
+ } else {
+ *DataSize = TotalSize;
+ Status = EFI_BUFFER_TOO_SMALL;
+ goto Done;
+ }
+ } else {
+ Status = EFI_NOT_FOUND;
+ }
+ }
+
+Done:
+ DEBUG ((DEBUG_ERROR, "GetLargeVariable: Status = %r\n", Status));
+ return Status;
+}
--
2.27.0.windows.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [edk2-platforms] [PATCH v2 4/4] MinPlatformPkg: Add LargeVariableWriteLib
2021-04-04 9:40 [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Nate DeSimone
` (2 preceding siblings ...)
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 3/4] MinPlatformPkg: Add LargeVariableReadLib Nate DeSimone
@ 2021-04-04 9:40 ` Nate DeSimone
2021-04-05 19:26 ` [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Oram, Isaac W
4 siblings, 0 replies; 9+ messages in thread
From: Nate DeSimone @ 2021-04-04 9:40 UTC (permalink / raw)
To: devel; +Cc: Chasel Chiu, Liming Gao, Eric Dong, Michael Kubacki, Isaac Oram
LargeVariableWriteLib is used to store large data sets using
the UEFI Variable Services. At time of writting, most UEFI
Variable Services implementations to not allow more than 64KB
of data to be stored in a single UEFI variable. This library
will split data sets across multiple variables as needed.
It adds the SetLargeVariable() API to provide this service.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
---
.../Include/Dsc/CoreCommonLib.dsc | 1 +
.../Include/Library/LargeVariableWriteLib.h | 58 +++
.../BaseLargeVariableWriteLib.inf | 44 ++
.../LargeVariableWriteLib.c | 479 ++++++++++++++++++
4 files changed, 582 insertions(+)
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
diff --git a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc
index 5f2ad3f0f0..78d66b9072 100644
--- a/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc
+++ b/Platform/Intel/MinPlatformPkg/Include/Dsc/CoreCommonLib.dsc
@@ -143,6 +143,7 @@
SafeIntLib|MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf
BmpSupportLib|MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf
LargeVariableReadLib|MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
+ LargeVariableWriteLib|MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
#
# CryptLib
diff --git a/Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h b/Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
new file mode 100644
index 0000000000..d23232ba07
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
@@ -0,0 +1,58 @@
+/** @file
+ Large Variable Write Lib
+
+ This library is used to store large data sets using the UEFI Variable Services.
+ At time of writting, most UEFI Variable Services implementations to not allow
+ more than 64KB of data to be stored in a single UEFI variable. This library
+ will split data sets across multiple variables as needed.
+
+ In the case where more than one variable is needed to store the data, an
+ integer number will be added to the end of the variable name. This number
+ will be incremented for each variable as needed to store the entire data set.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+
+/**
+ Sets the value of a large variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's variable.
+ Each VariableName is unique for each VendorGuid. VariableName must
+ contain 1 or more characters. If VariableName is an empty string,
+ then EFI_INVALID_PARAMETER is returned.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[in] LockVariable If TRUE, any further writes to the variable will be prevented until the next reset.
+ Note: LockVariable must be FALSE when running in SMM or after ExitBootServices.
+ @param[in] DataSize The size in bytes of the Data buffer. A size of zero causes the variable to be deleted.
+ If DataSize is zero, then LockVariable must be FALSE since a variable that does not
+ exist cannot be locked.
+ @param[in] Data The contents for the variable.
+
+ @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as
+ defined by the Attributes.
+ @retval EFI_INVALID_PARAMETER An invalid combination of LockVariable, name, and GUID was supplied, or the
+ DataSize exceeds the maximum allowed.
+ @retval EFI_INVALID_PARAMETER VariableName is an empty string.
+ @retval EFI_INVALID_PARAMETER DataSize is zero and LockVariable is TRUE
+ @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data.
+ @retval EFI_OUT_OF_RESOURCES The VariableName is longer than 1018 characters
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_WRITE_PROTECTED The variable in question is read-only.
+ @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.
+
+ @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found.
+
+**/
+EFI_STATUS
+EFIAPI
+SetLargeVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ IN BOOLEAN LockVariable,
+ IN UINTN DataSize,
+ IN VOID *Data
+ );
diff --git a/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
new file mode 100644
index 0000000000..c52718296c
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
@@ -0,0 +1,44 @@
+## @file
+# Component description file for Large Variable Write Library
+#
+# This library is used to store large data sets using the UEFI Variable Services.
+# At time of writting, most UEFI Variable Services implementations to not allow
+# more than 64KB of data to be stored in a single UEFI variable. This library
+# will split data sets across multiple variables as needed.
+#
+# In the case where more than one variable is needed to store the data, an
+# integer number will be added to the end of the variable name. This number
+# will be incremented for each variable as needed to store the entire data set.
+#
+# Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = BaseLargeVariableWriteLib
+ FILE_GUID = 13E7DD75-FBE0-4B92-87A9-6BED253EB99E
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = LargeVariableWriteLib
+
+#
+# VALID_ARCHITECTURES = IA32 X64 EBC
+#
+
+[Sources]
+ LargeVariableWriteLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MinPlatformPkg/MinPlatformPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ PrintLib
+ VariableReadLib
+ VariableWriteLib
diff --git a/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
new file mode 100644
index 0000000000..5cf4776707
--- /dev/null
+++ b/Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
@@ -0,0 +1,479 @@
+/** @file
+ Large Variable Write Lib
+
+ This library is used to store large data sets using the UEFI Variable Services.
+ At time of writting, most UEFI Variable Services implementations to not allow
+ more than 64KB of data to be stored in a single UEFI variable. This library
+ will split data sets across multiple variables as needed.
+
+ In the case where more than one variable is needed to store the data, an
+ integer number will be added to the end of the variable name. This number
+ will be incremented for each variable as needed to store the entire data set.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PrintLib.h>
+#include <Library/VariableReadLib.h>
+#include <Library/VariableWriteLib.h>
+
+//
+// 1024 was choosen because this is the size of the SMM communication buffer
+// used by VariableDxeSmm to transfer the VariableName from DXE to SMM. Choosing
+// the same size will prevent this library from limiting variable names any
+// more than the MdeModulePkg implementation of UEFI Variable Services does.
+//
+#define MAX_VARIABLE_NAME_SIZE 1024
+
+//
+// The 2012 Windows Hardware Requirements specified a minimum variable size of
+// 32KB. By setting the maximum allowed number of variables to 0x20000, this
+// allows up to 4GB of data to be stored on most UEFI implementations in
+// existence. Older UEFI implementations were known to only provide 8KB per
+// variable. In this case, up to 1GB can be stored. Since 1GB vastly exceeds the
+// size of any known NvStorage FV, choosing this number should effectively
+// enable all available NvStorage space to be used to store the given data.
+//
+#define MAX_VARIABLE_SPLIT 131072
+
+//
+// There are 6 digits in the number 131072, which means the length of the string
+// representation of this number will be at most 6 characters long.
+//
+#define MAX_VARIABLE_SPLIT_DIGITS 6
+
+//
+// On some architectures (Ex. Itanium) there a requirement to
+// maintain DWORD alignment of the variable data. Hence the
+// maximum possible padding size is 3.
+//
+#define MAX_VARIABLE_NAME_PAD_SIZE 3
+
+/**
+ Returns the amount of space remaining for storage of
+ non-volatile runtime accessible UEFI variables. Runtime accessible UEFI
+ variables are chosen because this is a BASE LibraryClass. Accordingly, it is
+ possible for a Runtime DXE driver to include this library. To simplify
+ implementation we only consider the runtime accessible case.
+
+ @retval The remaining storage space for non-volatile runtime accessible UEFI variables in bytes.
+
+**/
+UINT64
+GetRemainingVariableStorageSpace (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINT64 MaximumVariableStorageSize;
+ UINT64 RemainingVariableStorageSize;
+ UINT64 MaximumVariableSize;
+
+ Status = EFI_SUCCESS;
+ MaximumVariableStorageSize = 0;
+ RemainingVariableStorageSize = 0;
+ MaximumVariableSize = 0;
+
+ Status = VarLibQueryVariableInfo (
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ &MaximumVariableStorageSize,
+ &RemainingVariableStorageSize,
+ &MaximumVariableSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "GetVariableSplitSize: QueryVariableInfo failed, Status = %r\n", Status));
+ ASSERT_EFI_ERROR (Status);
+ return 0;
+ }
+
+ return RemainingVariableStorageSize;
+}
+
+/**
+ Returns the maximum size of an individual non-volatile runtime accessible
+ UEFI variable. Runtime accessible UEFI variables are chosen because this is
+ a BASE LibraryClass. Accordingly, it is possible for a Runtime DXE driver to
+ include this library. To simplify implementation we only consider the runtime
+ accessible case.
+
+ @param[in] VariableNameLength Length of the variable name
+
+ @retval The maximum size of an individual UEFI variable.
+
+**/
+UINT64
+GetVariableSplitSize (
+ IN UINTN VariableNameLength
+ )
+{
+ EFI_STATUS Status;
+ UINT64 MaximumVariableStorageSize;
+ UINT64 RemainingVariableStorageSize;
+ UINT64 VariableSplitSize;
+
+ Status = EFI_SUCCESS;
+ MaximumVariableStorageSize = 0;
+ RemainingVariableStorageSize = 0;
+ VariableSplitSize = 0;
+
+ Status = VarLibQueryVariableInfo (
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ &MaximumVariableStorageSize,
+ &RemainingVariableStorageSize,
+ &VariableSplitSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "GetVariableSplitSize: QueryVariableInfo failed, Status = %r\n", Status));
+ ASSERT_EFI_ERROR (Status);
+ return 0;
+ } else {
+ //
+ // The Variable Name counts as part of the consumed NV storage
+ // space for a UEFI Variable
+ //
+ if ((((VariableNameLength + 1) * sizeof (CHAR16)) + MAX_VARIABLE_NAME_PAD_SIZE) >= VariableSplitSize) {
+ VariableSplitSize = 0;
+ } else {
+ VariableSplitSize -= ((VariableNameLength + 1) * sizeof (CHAR16)) + MAX_VARIABLE_NAME_PAD_SIZE;
+ }
+ }
+
+ return VariableSplitSize;
+}
+
+/**
+ Deletes a large variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's variable.
+ Each VariableName is unique for each VendorGuid. VariableName must
+ contain 1 or more characters. If VariableName is an empty string,
+ then EFI_INVALID_PARAMETER is returned.
+ @param[in] VendorGuid A unique identifier for the vendor.
+
+ @retval EFI_SUCCESS The firmware has successfully deleted the variable and its data as
+ defined by the Attributes.
+ @retval EFI_INVALID_PARAMETER An invalid combination of name, and GUID was supplied.
+ @retval EFI_INVALID_PARAMETER VariableName is an empty string.
+ @retval EFI_OUT_OF_RESOURCES The VariableName is longer than 1018 characters
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_WRITE_PROTECTED The variable in question is read-only.
+ @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.
+
+ @retval EFI_NOT_FOUND The variable trying to be deleted was not found.
+
+**/
+EFI_STATUS
+EFIAPI
+DeleteLargeVariableInternal (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid
+ )
+{
+ CHAR16 TempVariableName[MAX_VARIABLE_NAME_SIZE];
+ EFI_STATUS Status;
+ EFI_STATUS Status2;
+ UINTN VarDataSize;
+ UINTN Index;
+
+ VarDataSize = 0;
+
+ //
+ // First check if a variable with the given name exists
+ //
+ Status = VarLibGetVariable (VariableName, VendorGuid, NULL, &VarDataSize, NULL);
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+ DEBUG ((DEBUG_INFO, "DeleteLargeVariableInternal: Deleting Single Variable\n"));
+ Status = VarLibSetVariable (
+ VariableName,
+ VendorGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ 0,
+ NULL
+ );
+ goto Done;
+ } else if (Status == EFI_NOT_FOUND) {
+
+ //
+ // Check if the first variable of a multi-variable set exists
+ //
+ if (StrLen (VariableName) >= (MAX_VARIABLE_NAME_SIZE - MAX_VARIABLE_SPLIT_DIGITS)) {
+ DEBUG ((DEBUG_ERROR, "DeleteLargeVariableInternal: Variable name too long\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+ VarDataSize = 0;
+ Index = 0;
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+ Status = VarLibGetVariable (TempVariableName, VendorGuid, NULL, &VarDataSize, NULL);
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+
+ //
+ // The first variable exists. Delete all the variables.
+ //
+ DEBUG ((DEBUG_INFO, "DeleteLargeVariableInternal: Multiple Variables Found\n"));
+ Status = EFI_SUCCESS;
+ for (Index = 0; Index < MAX_VARIABLE_SPLIT; Index++) {
+ VarDataSize = 0;
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+ DEBUG ((DEBUG_INFO, "Deleting %s, Guid = %g\n", TempVariableName, VendorGuid));
+ Status2 = VarLibSetVariable (
+ TempVariableName,
+ VendorGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ 0,
+ NULL
+ );
+ if (Status2 == EFI_NOT_FOUND) {
+ DEBUG ((DEBUG_INFO, "DeleteLargeVariableInternal: Deletion Complete.\n"));
+ break;
+ } else if (EFI_ERROR (Status2)) {
+ DEBUG ((DEBUG_ERROR, "DeleteLargeVariableInternal: Error deleting variable: Status = %r\n", Status2));
+ Status = Status2;
+ }
+ } // End of for loop
+ } else {
+ Status = EFI_NOT_FOUND;
+ }
+ }
+Done:
+ DEBUG ((DEBUG_ERROR, "DeleteLargeVariableInternal: Status = %r\n", Status));
+ return Status;
+}
+
+/**
+ Sets the value of a large variable.
+
+ @param[in] VariableName A Null-terminated string that is the name of the vendor's variable.
+ Each VariableName is unique for each VendorGuid. VariableName must
+ contain 1 or more characters. If VariableName is an empty string,
+ then EFI_INVALID_PARAMETER is returned.
+ @param[in] VendorGuid A unique identifier for the vendor.
+ @param[in] LockVariable If TRUE, any further writes to the variable will be prevented until the next reset.
+ Note: LockVariable must be FALSE when running in SMM or after ExitBootServices.
+ @param[in] DataSize The size in bytes of the Data buffer. A size of zero causes the variable to be deleted.
+ If DataSize is zero, then LockVariable must be FALSE since a variable that does not
+ exist cannot be locked.
+ @param[in] Data The contents for the variable.
+
+ @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as
+ defined by the Attributes.
+ @retval EFI_INVALID_PARAMETER An invalid combination of LockVariable, name, and GUID was supplied, or the
+ DataSize exceeds the maximum allowed.
+ @retval EFI_INVALID_PARAMETER VariableName is an empty string.
+ @retval EFI_INVALID_PARAMETER DataSize is zero and LockVariable is TRUE
+ @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data.
+ @retval EFI_OUT_OF_RESOURCES The VariableName is longer than 1018 characters
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.
+ @retval EFI_WRITE_PROTECTED The variable in question is read-only.
+ @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.
+
+ @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found.
+
+**/
+EFI_STATUS
+EFIAPI
+SetLargeVariable (
+ IN CHAR16 *VariableName,
+ IN EFI_GUID *VendorGuid,
+ IN BOOLEAN LockVariable,
+ IN UINTN DataSize,
+ IN VOID *Data
+ )
+{
+ CHAR16 TempVariableName[MAX_VARIABLE_NAME_SIZE];
+ UINT64 VariableSplitSize;
+ UINT64 RemainingVariableStorage;
+ EFI_STATUS Status;
+ EFI_STATUS Status2;
+ UINTN VariableNameLength;
+ UINTN Index;
+ UINTN VariablesSaved;
+ UINT8 *OffsetPtr;
+ UINTN BytesRemaining;
+ UINTN SizeToSave;
+
+ //
+ // Check input parameters.
+ //
+ if (VariableName == NULL || VariableName[0] == 0 || VendorGuid == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (DataSize != 0 && Data == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (DataSize == 0 && LockVariable) {
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Cannot lock a variable that is being deleted\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ VariablesSaved = 0;
+ if (LockVariable && !VarLibIsVariableRequestToLockSupported ()) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Variable locking is not currently supported\n"));
+ goto Done;
+ }
+
+ //
+ // Check if the variable is being deleted.
+ //
+ if (DataSize == 0) {
+ DEBUG ((DEBUG_INFO, "SetLargeVariable: Variable is being deleted.\n"));
+ Status = DeleteLargeVariableInternal (VariableName, VendorGuid);
+ goto Done;
+ }
+
+ VariableNameLength = StrLen (VariableName);
+ VariableSplitSize = GetVariableSplitSize (VariableNameLength);
+ if (DataSize <= VariableSplitSize) {
+
+ //
+ // A single variable is sufficient to store the data, only create one.
+ //
+ DEBUG ((DEBUG_INFO, "SetLargeVariable: Saving using single variable.\n"));
+ Status = VarLibSetVariable (
+ VariableName,
+ VendorGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ DataSize,
+ Data
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+ if (LockVariable) {
+ Status = VarLibVariableRequestToLock (VariableName, VendorGuid);
+ }
+ } else {
+ //
+ // Multiple variables are needed
+ //
+
+ //
+ // Check the length of the variable name is short enough to allow an integer
+ // to be appended.
+ //
+ if (VariableNameLength >= (MAX_VARIABLE_NAME_SIZE - MAX_VARIABLE_SPLIT_DIGITS)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Variable name too long\n"));
+ goto Done;
+ }
+
+ //
+ // Check that it is possible to store the data using less than
+ // MAX_VARIABLE_SPLIT variables
+ //
+ if ((DataSize / (VariableSplitSize - MAX_VARIABLE_SPLIT_DIGITS)) > MAX_VARIABLE_SPLIT) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "SetLargeVariable: More than %d variables are needed to store the data, which exceeds the maximum supported\n",
+ MAX_VARIABLE_SPLIT
+ ));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // Check that there is enough space remaining in the UEFI Variable Services
+ // Non-Volatile storage to store the data.
+ //
+ RemainingVariableStorage = GetRemainingVariableStorageSpace ();
+ if (DataSize > RemainingVariableStorage) {
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Not enough NV storage space to store the data\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ DEBUG ((DEBUG_INFO, "SetLargeVariable: Saving using multiple variables.\n"));
+ OffsetPtr = (UINT8 *) Data;
+ BytesRemaining = DataSize;
+ VariablesSaved = 0;
+
+ //
+ // Store chunks of data in UEFI variables until all data is stored
+ //
+ for (Index = 0; (Index < MAX_VARIABLE_SPLIT) && (BytesRemaining > 0); Index++) {
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+
+ SizeToSave = 0;
+ VariableNameLength = StrLen (TempVariableName);
+ VariableSplitSize = GetVariableSplitSize (VariableNameLength);
+ if (VariableSplitSize == 0) {
+ DEBUG ((DEBUG_ERROR, "Unable to save variable, out of NV storage space\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ if (BytesRemaining > VariableSplitSize) {
+ SizeToSave = (UINTN) VariableSplitSize;
+ } else {
+ SizeToSave = BytesRemaining;
+ }
+ DEBUG ((DEBUG_INFO, "Saving %s, Guid = %g, Size %d\n", TempVariableName, VendorGuid, SizeToSave));
+ Status = VarLibSetVariable (
+ TempVariableName,
+ VendorGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ SizeToSave,
+ (VOID *) OffsetPtr
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Error writting variable: Status = %r\n", Status));
+ goto Done;
+ }
+ VariablesSaved = Index;
+ BytesRemaining -= SizeToSave;
+ OffsetPtr += SizeToSave;
+ } // End of for loop
+
+ //
+ // If the user requested that the variables be locked, lock them now that
+ // all data is saved.
+ //
+ if (LockVariable) {
+ for (Index = 0; Index < VariablesSaved; Index++) {
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+
+ DEBUG ((DEBUG_INFO, "Locking %s, Guid = %g\n", TempVariableName, VendorGuid));
+ Status = VarLibVariableRequestToLock (TempVariableName, VendorGuid);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Error locking variable: Status = %r\n", Status));
+ VariablesSaved = 0;
+ goto Done;
+ }
+ }
+ }
+ }
+
+Done:
+ if (EFI_ERROR (Status) && VariablesSaved > 0) {
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: An error was encountered, deleting variables with partially stored data\n"));
+ for (Index = 0; Index < VariablesSaved; Index++) {
+ ZeroMem (TempVariableName, MAX_VARIABLE_NAME_SIZE);
+ UnicodeSPrint (TempVariableName, MAX_VARIABLE_NAME_SIZE, L"%s%d", VariableName, Index);
+
+ DEBUG ((DEBUG_INFO, "Deleting %s, Guid = %g\n", TempVariableName, VendorGuid));
+ Status2 = VarLibSetVariable (
+ TempVariableName,
+ VendorGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ 0,
+ NULL
+ );
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Error deleting variable: Status = %r\n", Status2));
+ }
+ }
+ DEBUG ((DEBUG_ERROR, "SetLargeVariable: Status = %r\n", Status));
+ return Status;
+}
--
2.27.0.windows.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
2021-04-04 9:40 [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Nate DeSimone
` (3 preceding siblings ...)
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 4/4] MinPlatformPkg: Add LargeVariableWriteLib Nate DeSimone
@ 2021-04-05 19:26 ` Oram, Isaac W
2021-04-05 19:30 ` Bret Barkelew
4 siblings, 1 reply; 9+ messages in thread
From: Oram, Isaac W @ 2021-04-05 19:26 UTC (permalink / raw)
To: Desimone, Nathaniel L, devel@edk2.groups.io
Cc: Chiu, Chasel, Liming Gao, Dong, Eric, Michael Kubacki
Series Reviewed-by: Isaac Oram <isaac.w.oram@intel.com>
-----Original Message-----
From: Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>
Sent: Sunday, April 4, 2021 2:41 AM
To: devel@edk2.groups.io
Cc: Chiu, Chasel <chasel.chiu@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>; Dong, Eric <eric.dong@intel.com>; Michael Kubacki <michael.kubacki@microsoft.com>; Oram, Isaac W <isaac.w.oram@intel.com>
Subject: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
Changes from V1:
- Changed prefix from "Min" to "VarLib"
- Better comments
- Added more whitespace for readability
- Removed unused INF sections
- Better debug messages
This patch series introduces libaries that enable large data sets to be stored using the UEFI Variable Services. At present, most UEFI Variable Services implementations have a maximum variable size of <=64KB. The exact value varies depending on platform.
These libaries enable a data set to use as much space as needed, up to the remaining space in the UEFI Variable non-volatile storage.
To implement this, I have broken the problem down into two parts:
1. Phase angostic UEFI Variable access.
2. Storage of data across multiple UEFI Variables.
For the first part, I have created two new LibraryClasses:
VariableReadLib and VariableWriteLib. I have provided implementation instances of VariableReadLib for PEI, DXE, and SMM.
For VariableWriteLib, I have provided implementation instances for DXE and SMM. This enables code that accesses UEFI variables to be written in a matter than is phase agnostic, so the same code can be used in PEI, DXE, or SMM without modification.
The second part involves another two new LibaryClasses:
LargeVariableReadLib and LargeVariableWriteLib. Only one BASE implementation is needed for both of these as the phase dependent code was seperated out in the first piece. These libraries provide logic to calculate the maximum size of an individual UEFI variable and split the data into as many smaller pieces as needed to store the entire data set in the UEFI Variable storage. They also provide the ability to stitch the data back together when it is read.
Deleting the data will delete all variables used to store it.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Nate DeSimone (4):
MinPlatformPkg: Add VariableReadLib
MinPlatformPkg: Add VariableWriteLib
MinPlatformPkg: Add LargeVariableReadLib
MinPlatformPkg: Add LargeVariableWriteLib
.../Include/Dsc/CoreCommonLib.dsc | 6 +-
.../MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc | 12 +-
.../MinPlatformPkg/Include/Dsc/CorePeiLib.dsc | 9 +-
.../Include/Library/LargeVariableReadLib.h | 50 ++
.../Include/Library/LargeVariableWriteLib.h | 58 +++
.../Include/Library/VariableReadLib.h | 87 ++++
.../Include/Library/VariableWriteLib.h | 129 +++++
.../BaseLargeVariableReadLib.inf | 44 ++
.../LargeVariableReadLib.c | 199 ++++++++
.../BaseLargeVariableWriteLib.inf | 44 ++
.../LargeVariableWriteLib.c | 479 ++++++++++++++++++
.../DxeRuntimeVariableReadLib.c | 115 +++++
.../DxeRuntimeVariableReadLib.inf | 41 ++
.../DxeRuntimeVariableWriteLib.c | 256 ++++++++++
.../DxeRuntimeVariableWriteLib.inf | 49 ++
.../PeiVariableReadLib/PeiVariableReadLib.c | 153 ++++++
.../PeiVariableReadLib/PeiVariableReadLib.inf | 42 ++
.../SmmVariableReadCommon.c | 114 +++++
.../StandaloneMmVariableReadLib.inf | 50 ++
.../StandaloneMmVariableReadLibConstructor.c | 48 ++
.../TraditionalMmVariableReadLib.inf | 49 ++
.../TraditionalMmVariableReadLibConstructor.c | 48 ++
.../SmmVariableWriteCommon.c | 167 ++++++
.../StandaloneMmVariableWriteLib.inf | 45 ++
.../StandaloneMmVariableWriteLibConstructor.c | 48 ++
.../TraditionalMmVariableWriteLib.inf | 44 ++
...TraditionalMmVariableWriteLibConstructor.c | 48 ++
.../Intel/MinPlatformPkg/MinPlatformPkg.dsc | 4 +-
28 files changed, 2428 insertions(+), 10 deletions(-) create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
--
2.27.0.windows.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
2021-04-05 19:26 ` [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Oram, Isaac W
@ 2021-04-05 19:30 ` Bret Barkelew
2021-04-05 20:25 ` Nate DeSimone
0 siblings, 1 reply; 9+ messages in thread
From: Bret Barkelew @ 2021-04-05 19:30 UTC (permalink / raw)
To: devel@edk2.groups.io, isaac.w.oram@intel.com,
Desimone, Nathaniel L
Cc: Chiu, Chasel, Liming Gao, Dong, Eric, Michael Kubacki
[-- Attachment #1: Type: text/plain, Size: 7664 bytes --]
Naïve question: if max variable size is not already configurable, why not just do that?
- Bret
From: Oram, Isaac W via groups.io<mailto:isaac.w.oram=intel.com@groups.io>
Sent: Monday, April 5, 2021 12:27 PM
To: Desimone, Nathaniel L<mailto:nathaniel.l.desimone@intel.com>; devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Cc: Chiu, Chasel<mailto:chasel.chiu@intel.com>; Liming Gao<mailto:gaoliming@byosoft.com.cn>; Dong, Eric<mailto:eric.dong@intel.com>; Michael Kubacki<mailto:Michael.Kubacki@microsoft.com>
Subject: [EXTERNAL] Re: [edk2-devel] [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
Series Reviewed-by: Isaac Oram <isaac.w.oram@intel.com>
-----Original Message-----
From: Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>
Sent: Sunday, April 4, 2021 2:41 AM
To: devel@edk2.groups.io
Cc: Chiu, Chasel <chasel.chiu@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>; Dong, Eric <eric.dong@intel.com>; Michael Kubacki <michael.kubacki@microsoft.com>; Oram, Isaac W <isaac.w.oram@intel.com>
Subject: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
Changes from V1:
- Changed prefix from "Min" to "VarLib"
- Better comments
- Added more whitespace for readability
- Removed unused INF sections
- Better debug messages
This patch series introduces libaries that enable large data sets to be stored using the UEFI Variable Services. At present, most UEFI Variable Services implementations have a maximum variable size of <=64KB. The exact value varies depending on platform.
These libaries enable a data set to use as much space as needed, up to the remaining space in the UEFI Variable non-volatile storage.
To implement this, I have broken the problem down into two parts:
1. Phase angostic UEFI Variable access.
2. Storage of data across multiple UEFI Variables.
For the first part, I have created two new LibraryClasses:
VariableReadLib and VariableWriteLib. I have provided implementation instances of VariableReadLib for PEI, DXE, and SMM.
For VariableWriteLib, I have provided implementation instances for DXE and SMM. This enables code that accesses UEFI variables to be written in a matter than is phase agnostic, so the same code can be used in PEI, DXE, or SMM without modification.
The second part involves another two new LibaryClasses:
LargeVariableReadLib and LargeVariableWriteLib. Only one BASE implementation is needed for both of these as the phase dependent code was seperated out in the first piece. These libraries provide logic to calculate the maximum size of an individual UEFI variable and split the data into as many smaller pieces as needed to store the entire data set in the UEFI Variable storage. They also provide the ability to stitch the data back together when it is read.
Deleting the data will delete all variables used to store it.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Nate DeSimone (4):
MinPlatformPkg: Add VariableReadLib
MinPlatformPkg: Add VariableWriteLib
MinPlatformPkg: Add LargeVariableReadLib
MinPlatformPkg: Add LargeVariableWriteLib
.../Include/Dsc/CoreCommonLib.dsc | 6 +-
.../MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc | 12 +-
.../MinPlatformPkg/Include/Dsc/CorePeiLib.dsc | 9 +-
.../Include/Library/LargeVariableReadLib.h | 50 ++
.../Include/Library/LargeVariableWriteLib.h | 58 +++
.../Include/Library/VariableReadLib.h | 87 ++++
.../Include/Library/VariableWriteLib.h | 129 +++++
.../BaseLargeVariableReadLib.inf | 44 ++
.../LargeVariableReadLib.c | 199 ++++++++
.../BaseLargeVariableWriteLib.inf | 44 ++
.../LargeVariableWriteLib.c | 479 ++++++++++++++++++
.../DxeRuntimeVariableReadLib.c | 115 +++++
.../DxeRuntimeVariableReadLib.inf | 41 ++
.../DxeRuntimeVariableWriteLib.c | 256 ++++++++++
.../DxeRuntimeVariableWriteLib.inf | 49 ++
.../PeiVariableReadLib/PeiVariableReadLib.c | 153 ++++++
.../PeiVariableReadLib/PeiVariableReadLib.inf | 42 ++
.../SmmVariableReadCommon.c | 114 +++++
.../StandaloneMmVariableReadLib.inf | 50 ++
.../StandaloneMmVariableReadLibConstructor.c | 48 ++
.../TraditionalMmVariableReadLib.inf | 49 ++
.../TraditionalMmVariableReadLibConstructor.c | 48 ++
.../SmmVariableWriteCommon.c | 167 ++++++
.../StandaloneMmVariableWriteLib.inf | 45 ++
.../StandaloneMmVariableWriteLibConstructor.c | 48 ++
.../TraditionalMmVariableWriteLib.inf | 44 ++
...TraditionalMmVariableWriteLibConstructor.c | 48 ++
.../Intel/MinPlatformPkg/MinPlatformPkg.dsc | 4 +-
28 files changed, 2428 insertions(+), 10 deletions(-) create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
--
2.27.0.windows.1
[-- Attachment #2: Type: text/html, Size: 11589 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
2021-04-05 19:30 ` Bret Barkelew
@ 2021-04-05 20:25 ` Nate DeSimone
2021-04-05 21:33 ` [edk2-devel] " Michael Kubacki
0 siblings, 1 reply; 9+ messages in thread
From: Nate DeSimone @ 2021-04-05 20:25 UTC (permalink / raw)
To: Bret Barkelew, devel@edk2.groups.io, Oram, Isaac W
Cc: Chiu, Chasel, Liming Gao, Dong, Eric, Michael Kubacki
[-- Attachment #1: Type: text/plain, Size: 8907 bytes --]
The max variable size is a build time configurable option. For those that produce binary compatible drivers/OpROMs which need to work both with TianoCore and other vendor provided UEFI PI implementations, the luxury of recompiling the entire BIOS image or dictating the platform's choice for PcdMaxVariableSize image may not exist.
From: Bret Barkelew <Bret.Barkelew@microsoft.com>
Sent: Monday, April 5, 2021 12:31 PM
To: devel@edk2.groups.io; Oram, Isaac W <isaac.w.oram@intel.com>; Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>
Cc: Chiu, Chasel <chasel.chiu@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>; Dong, Eric <eric.dong@intel.com>; Michael Kubacki <Michael.Kubacki@microsoft.com>
Subject: RE: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
Naïve question: if max variable size is not already configurable, why not just do that?
- Bret
From: Oram, Isaac W via groups.io<mailto:isaac.w.oram=intel.com@groups.io>
Sent: Monday, April 5, 2021 12:27 PM
To: Desimone, Nathaniel L<mailto:nathaniel.l.desimone@intel.com>; devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Cc: Chiu, Chasel<mailto:chasel.chiu@intel.com>; Liming Gao<mailto:gaoliming@byosoft.com.cn>; Dong, Eric<mailto:eric.dong@intel.com>; Michael Kubacki<mailto:Michael.Kubacki@microsoft.com>
Subject: [EXTERNAL] Re: [edk2-devel] [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
Series Reviewed-by: Isaac Oram <isaac.w.oram@intel.com<mailto:isaac.w.oram@intel.com>>
-----Original Message-----
From: Desimone, Nathaniel L <nathaniel.l.desimone@intel.com<mailto:nathaniel.l.desimone@intel.com>>
Sent: Sunday, April 4, 2021 2:41 AM
To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Cc: Chiu, Chasel <chasel.chiu@intel.com<mailto:chasel.chiu@intel.com>>; Liming Gao <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>; Dong, Eric <eric.dong@intel.com<mailto:eric.dong@intel.com>>; Michael Kubacki <michael.kubacki@microsoft.com<mailto:michael.kubacki@microsoft.com>>; Oram, Isaac W <isaac.w.oram@intel.com<mailto:isaac.w.oram@intel.com>>
Subject: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
Changes from V1:
- Changed prefix from "Min" to "VarLib"
- Better comments
- Added more whitespace for readability
- Removed unused INF sections
- Better debug messages
This patch series introduces libaries that enable large data sets to be stored using the UEFI Variable Services. At present, most UEFI Variable Services implementations have a maximum variable size of <=64KB. The exact value varies depending on platform.
These libaries enable a data set to use as much space as needed, up to the remaining space in the UEFI Variable non-volatile storage.
To implement this, I have broken the problem down into two parts:
1. Phase angostic UEFI Variable access.
2. Storage of data across multiple UEFI Variables.
For the first part, I have created two new LibraryClasses:
VariableReadLib and VariableWriteLib. I have provided implementation instances of VariableReadLib for PEI, DXE, and SMM.
For VariableWriteLib, I have provided implementation instances for DXE and SMM. This enables code that accesses UEFI variables to be written in a matter than is phase agnostic, so the same code can be used in PEI, DXE, or SMM without modification.
The second part involves another two new LibaryClasses:
LargeVariableReadLib and LargeVariableWriteLib. Only one BASE implementation is needed for both of these as the phase dependent code was seperated out in the first piece. These libraries provide logic to calculate the maximum size of an individual UEFI variable and split the data into as many smaller pieces as needed to store the entire data set in the UEFI Variable storage. They also provide the ability to stitch the data back together when it is read.
Deleting the data will delete all variables used to store it.
Cc: Chasel Chiu <chasel.chiu@intel.com<mailto:chasel.chiu@intel.com>>
Cc: Liming Gao <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
Cc: Eric Dong <eric.dong@intel.com<mailto:eric.dong@intel.com>>
Cc: Michael Kubacki <michael.kubacki@microsoft.com<mailto:michael.kubacki@microsoft.com>>
Cc: Isaac Oram <isaac.w.oram@intel.com<mailto:isaac.w.oram@intel.com>>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com<mailto:nathaniel.l.desimone@intel.com>>
Nate DeSimone (4):
MinPlatformPkg: Add VariableReadLib
MinPlatformPkg: Add VariableWriteLib
MinPlatformPkg: Add LargeVariableReadLib
MinPlatformPkg: Add LargeVariableWriteLib
.../Include/Dsc/CoreCommonLib.dsc | 6 +-
.../MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc | 12 +-
.../MinPlatformPkg/Include/Dsc/CorePeiLib.dsc | 9 +-
.../Include/Library/LargeVariableReadLib.h | 50 ++
.../Include/Library/LargeVariableWriteLib.h | 58 +++
.../Include/Library/VariableReadLib.h | 87 ++++
.../Include/Library/VariableWriteLib.h | 129 +++++
.../BaseLargeVariableReadLib.inf | 44 ++
.../LargeVariableReadLib.c | 199 ++++++++
.../BaseLargeVariableWriteLib.inf | 44 ++
.../LargeVariableWriteLib.c | 479 ++++++++++++++++++
.../DxeRuntimeVariableReadLib.c | 115 +++++
.../DxeRuntimeVariableReadLib.inf | 41 ++
.../DxeRuntimeVariableWriteLib.c | 256 ++++++++++
.../DxeRuntimeVariableWriteLib.inf | 49 ++
.../PeiVariableReadLib/PeiVariableReadLib.c | 153 ++++++
.../PeiVariableReadLib/PeiVariableReadLib.inf | 42 ++
.../SmmVariableReadCommon.c | 114 +++++
.../StandaloneMmVariableReadLib.inf | 50 ++
.../StandaloneMmVariableReadLibConstructor.c | 48 ++
.../TraditionalMmVariableReadLib.inf | 49 ++
.../TraditionalMmVariableReadLibConstructor.c | 48 ++
.../SmmVariableWriteCommon.c | 167 ++++++
.../StandaloneMmVariableWriteLib.inf | 45 ++
.../StandaloneMmVariableWriteLibConstructor.c | 48 ++
.../TraditionalMmVariableWriteLib.inf | 44 ++
...TraditionalMmVariableWriteLibConstructor.c | 48 ++
.../Intel/MinPlatformPkg/MinPlatformPkg.dsc | 4 +-
28 files changed, 2428 insertions(+), 10 deletions(-) create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
create mode 100644 Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
--
2.27.0.windows.1
[-- Attachment #2: Type: text/html, Size: 13468 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
2021-04-05 20:25 ` Nate DeSimone
@ 2021-04-05 21:33 ` Michael Kubacki
0 siblings, 0 replies; 9+ messages in thread
From: Michael Kubacki @ 2021-04-05 21:33 UTC (permalink / raw)
To: devel, nathaniel.l.desimone, Bret Barkelew, Oram, Isaac W
Cc: Chiu, Chasel, Liming Gao, Dong, Eric, Michael Kubacki
I have not reviewed the code yet but I think that's an important point
to capture. Could you please add that use case to the commit? Perhaps
the commit message and INF file description for the LargeVariableLibs?
Thanks,
Michael
On 4/5/2021 1:25 PM, Nate DeSimone wrote:
> The max variable size is a build time configurable option. For those
> that produce binary compatible drivers/OpROMs which need to work both
> with TianoCore and other vendor provided UEFI PI implementations, the
> luxury of recompiling the entire BIOS image or dictating the platform’s
> choice for PcdMaxVariableSize image may not exist.
>
> *From:* Bret Barkelew <Bret.Barkelew@microsoft.com>
> *Sent:* Monday, April 5, 2021 12:31 PM
> *To:* devel@edk2.groups.io; Oram, Isaac W <isaac.w.oram@intel.com>;
> Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>
> *Cc:* Chiu, Chasel <chasel.chiu@intel.com>; Liming Gao
> <gaoliming@byosoft.com.cn>; Dong, Eric <eric.dong@intel.com>; Michael
> Kubacki <Michael.Kubacki@microsoft.com>
> *Subject:* RE: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
>
> Naïve question: if max variable size is not already configurable, why
> not just do that?
>
> - Bret
>
> *From: *Oram, Isaac W via groups.io
> <mailto:isaac.w.oram=intel.com@groups.io>
> *Sent: *Monday, April 5, 2021 12:27 PM
> *To: *Desimone, Nathaniel L <mailto:nathaniel.l.desimone@intel.com>;
> devel@edk2.groups.io <mailto:devel@edk2.groups.io>
> *Cc: *Chiu, Chasel <mailto:chasel.chiu@intel.com>; Liming Gao
> <mailto:gaoliming@byosoft.com.cn>; Dong, Eric
> <mailto:eric.dong@intel.com>; Michael Kubacki
> <mailto:Michael.Kubacki@microsoft.com>
> *Subject: *[EXTERNAL] Re: [edk2-devel] [edk2-platforms] [PATCH v2 0/4]
> Add Large Variable Libraries
>
> Series Reviewed-by: Isaac Oram <isaac.w.oram@intel.com
> <mailto:isaac.w.oram@intel.com>>
>
> -----Original Message-----
> From: Desimone, Nathaniel L <nathaniel.l.desimone@intel.com
> <mailto:nathaniel.l.desimone@intel.com>>
> Sent: Sunday, April 4, 2021 2:41 AM
> To: devel@edk2.groups.io <mailto:devel@edk2.groups.io>
> Cc: Chiu, Chasel <chasel.chiu@intel.com <mailto:chasel.chiu@intel.com>>;
> Liming Gao <gaoliming@byosoft.com.cn <mailto:gaoliming@byosoft.com.cn>>;
> Dong, Eric <eric.dong@intel.com <mailto:eric.dong@intel.com>>; Michael
> Kubacki <michael.kubacki@microsoft.com
> <mailto:michael.kubacki@microsoft.com>>; Oram, Isaac W
> <isaac.w.oram@intel.com <mailto:isaac.w.oram@intel.com>>
> Subject: [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries
>
> Changes from V1:
> - Changed prefix from "Min" to "VarLib"
> - Better comments
> - Added more whitespace for readability
> - Removed unused INF sections
> - Better debug messages
>
> This patch series introduces libaries that enable large data sets to be
> stored using the UEFI Variable Services. At present, most UEFI Variable
> Services implementations have a maximum variable size of <=64KB. The
> exact value varies depending on platform.
>
> These libaries enable a data set to use as much space as needed, up to
> the remaining space in the UEFI Variable non-volatile storage.
>
> To implement this, I have broken the problem down into two parts:
>
> 1. Phase angostic UEFI Variable access.
> 2. Storage of data across multiple UEFI Variables.
>
> For the first part, I have created two new LibraryClasses:
> VariableReadLib and VariableWriteLib. I have provided implementation
> instances of VariableReadLib for PEI, DXE, and SMM.
> For VariableWriteLib, I have provided implementation instances for DXE
> and SMM. This enables code that accesses UEFI variables to be written in
> a matter than is phase agnostic, so the same code can be used in PEI,
> DXE, or SMM without modification.
>
> The second part involves another two new LibaryClasses:
> LargeVariableReadLib and LargeVariableWriteLib. Only one BASE
> implementation is needed for both of these as the phase dependent code
> was seperated out in the first piece. These libraries provide logic to
> calculate the maximum size of an individual UEFI variable and split the
> data into as many smaller pieces as needed to store the entire data set
> in the UEFI Variable storage. They also provide the ability to stitch
> the data back together when it is read.
> Deleting the data will delete all variables used to store it.
>
> Cc: Chasel Chiu <chasel.chiu@intel.com <mailto:chasel.chiu@intel.com>>
> Cc: Liming Gao <gaoliming@byosoft.com.cn <mailto:gaoliming@byosoft.com.cn>>
> Cc: Eric Dong <eric.dong@intel.com <mailto:eric.dong@intel.com>>
> Cc: Michael Kubacki <michael.kubacki@microsoft.com
> <mailto:michael.kubacki@microsoft.com>>
> Cc: Isaac Oram <isaac.w.oram@intel.com <mailto:isaac.w.oram@intel.com>>
> Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com
> <mailto:nathaniel.l.desimone@intel.com>>
>
> Nate DeSimone (4):
> MinPlatformPkg: Add VariableReadLib
> MinPlatformPkg: Add VariableWriteLib
> MinPlatformPkg: Add LargeVariableReadLib
> MinPlatformPkg: Add LargeVariableWriteLib
>
> .../Include/Dsc/CoreCommonLib.dsc | 6 +-
> .../MinPlatformPkg/Include/Dsc/CoreDxeLib.dsc | 12 +-
> .../MinPlatformPkg/Include/Dsc/CorePeiLib.dsc | 9 +-
> .../Include/Library/LargeVariableReadLib.h | 50 ++
> .../Include/Library/LargeVariableWriteLib.h | 58 +++
> .../Include/Library/VariableReadLib.h | 87 ++++
> .../Include/Library/VariableWriteLib.h | 129 +++++
> .../BaseLargeVariableReadLib.inf | 44 ++
> .../LargeVariableReadLib.c | 199 ++++++++
> .../BaseLargeVariableWriteLib.inf | 44 ++
> .../LargeVariableWriteLib.c | 479 ++++++++++++++++++
> .../DxeRuntimeVariableReadLib.c | 115 +++++
> .../DxeRuntimeVariableReadLib.inf | 41 ++
> .../DxeRuntimeVariableWriteLib.c | 256 ++++++++++
> .../DxeRuntimeVariableWriteLib.inf | 49 ++
> .../PeiVariableReadLib/PeiVariableReadLib.c | 153 ++++++
> .../PeiVariableReadLib/PeiVariableReadLib.inf | 42 ++
> .../SmmVariableReadCommon.c | 114 +++++
> .../StandaloneMmVariableReadLib.inf | 50 ++
> .../StandaloneMmVariableReadLibConstructor.c | 48 ++
> .../TraditionalMmVariableReadLib.inf | 49 ++
> .../TraditionalMmVariableReadLibConstructor.c | 48 ++
> .../SmmVariableWriteCommon.c | 167 ++++++
> .../StandaloneMmVariableWriteLib.inf | 45 ++
> .../StandaloneMmVariableWriteLibConstructor.c | 48 ++
> .../TraditionalMmVariableWriteLib.inf | 44 ++
> ...TraditionalMmVariableWriteLibConstructor.c | 48 ++
> .../Intel/MinPlatformPkg/MinPlatformPkg.dsc | 4 +-
> 28 files changed, 2428 insertions(+), 10 deletions(-) create mode
> 100644 Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableReadLib.h
> create mode 100644
> Platform/Intel/MinPlatformPkg/Include/Library/LargeVariableWriteLib.h
> create mode 100644
> Platform/Intel/MinPlatformPkg/Include/Library/VariableReadLib.h
> create mode 100644
> Platform/Intel/MinPlatformPkg/Include/Library/VariableWriteLib.h
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/BaseLargeVariableReadLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableReadLib/LargeVariableReadLib.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/BaseLargeVariableWriteLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/BaseLargeVariableWriteLib/LargeVariableWriteLib.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableReadLib/DxeRuntimeVariableReadLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/DxeRuntimeVariableWriteLib/DxeRuntimeVariableWriteLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/PeiVariableReadLib/PeiVariableReadLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/SmmVariableReadCommon.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/StandaloneMmVariableReadLibConstructor.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableReadLib/TraditionalMmVariableReadLibConstructor.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/SmmVariableWriteCommon.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/StandaloneMmVariableWriteLibConstructor.c
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLib.inf
> create mode 100644
> Platform/Intel/MinPlatformPkg/Library/SmmVariableWriteLib/TraditionalMmVariableWriteLibConstructor.c
>
> --
> 2.27.0.windows.1
>
>
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-04-05 21:33 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-04-04 9:40 [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 1/4] MinPlatformPkg: Add VariableReadLib Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 2/4] MinPlatformPkg: Add VariableWriteLib Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 3/4] MinPlatformPkg: Add LargeVariableReadLib Nate DeSimone
2021-04-04 9:40 ` [edk2-platforms] [PATCH v2 4/4] MinPlatformPkg: Add LargeVariableWriteLib Nate DeSimone
2021-04-05 19:26 ` [edk2-platforms] [PATCH v2 0/4] Add Large Variable Libraries Oram, Isaac W
2021-04-05 19:30 ` Bret Barkelew
2021-04-05 20:25 ` Nate DeSimone
2021-04-05 21:33 ` [edk2-devel] " Michael Kubacki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox