From: "Heng Luo" <heng.luo@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"gaoliming@byosoft.com.cn" <gaoliming@byosoft.com.cn>
Cc: "Dong, Eric" <eric.dong@intel.com>,
"Chiu, Chasel" <chasel.chiu@intel.com>,
"Desimone, Nathaniel L" <nathaniel.l.desimone@intel.com>
Subject: Re: [edk2-devel] [Patch V5 1/3] MinPlatformPkg: Add PCDs for Serial Terminal feature
Date: Thu, 12 Nov 2020 02:44:14 +0000 [thread overview]
Message-ID: <MWHPR11MB180546700F11A516AE3D278D93E70@MWHPR11MB1805.namprd11.prod.outlook.com> (raw)
In-Reply-To: <001901d6b895$ee085650$ca1902f0$@byosoft.com.cn>
Hi Liming,
Agree with you, I will send Patch V6.
Thanks,
heng
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> gaoliming
> Sent: Thursday, November 12, 2020 9:49 AM
> To: devel@edk2.groups.io; Luo, Heng <heng.luo@intel.com>
> Cc: Dong, Eric <eric.dong@intel.com>; Chiu, Chasel <chasel.chiu@intel.com>;
> Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>
> Subject: 回复: [edk2-devel] [Patch V5 1/3] MinPlatformPkg: Add PCDs for
> Serial Terminal feature
>
> Heng:
> I see MdeModulePkg SerialDxe uses MdePkg UART PCDs. New added
> SerialPortTerminalLib should match it and use the same PCD. Right? If yes,
> you don't need to add new UART PCDs.
>
> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate ## CONSUMES
> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits ## CONSUMES
> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity ## CONSUMES
> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits ## CONSUMES
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: bounce+27952+67278+4905953+8761045@groups.io
> > <bounce+27952+67278+4905953+8761045@groups.io> 代表 Heng Luo
> > 发送时间: 2020年11月11日 14:16
> > 收件人: devel@edk2.groups.io
> > 抄送: Eric Dong <eric.dong@intel.com>; Chasel Chiu
> > <chasel.chiu@intel.com>; Nate DeSimone
> > <nathaniel.l.desimone@intel.com>; Liming Gao
> > <gaoliming@byosoft.com.cn>
> > 主题: [edk2-devel] [Patch V5 1/3] MinPlatformPkg: Add PCDs for Serial
> > Terminal feature
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3014
> >
> > 1. Add PcdSerialTerminalEnable to enable/disable Serial Terminal feature,
> > this feature supports console redirect after the shell is loaded.
> > 2. Add PCDs to configure serial port.
> >
> > Cc: Eric Dong <eric.dong@intel.com>
> > Cc: Chasel Chiu <chasel.chiu@intel.com>
> > Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Signed-off-by: Heng Luo <heng.luo@intel.com>
> > ---
> > Platform/Intel/MinPlatformPkg/MinPlatformPkg.dec | 25
> > +++++++++++++++++++++++++
> > Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc | 3 ++-
> > 2 files changed, 27 insertions(+), 1 deletion(-)
> >
> > diff --git a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dec
> > b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dec
> > index 7ef189dac8..36050aa1a8 100644
> > --- a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dec
> > +++ b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dec
> > @@ -205,6 +205,30 @@
> > [PcdsDynamic, PcdsDynamicEx]
> >
> >
> >
> gMinPlatformPkgTokenSpaceGuid.PcdPcIoApicEnable|0x0|UINT32|0x900000
> > 19
> >
> >
> >
> > + # The baud rate setting for the UART style device. A value of 0
> >
> > + # means that the device's default baud rate will be used.
> >
> > +
> >
> gMinPlatformPkgTokenSpaceGuid.PcdSerialTerminalBaudRate|115200|UINT6
> > 4|0x9000001A
> >
> > +
> >
> > + # The number of data bits for the UART style device. A value
> >
> > + # of 0 means that the device's default number of data bits will be
> used.
> >
> > +
> >
> gMinPlatformPkgTokenSpaceGuid.PcdSerialTerminalDataBits|0x8|UINT8|0x9
> > 000001B
> >
> > +
> >
> > + # The parity setting for the UART style device.
> >
> > + # Parity 0x00 - Default Parity.
> >
> > + # Parity 0x01 - No Parity.
> >
> > + # Parity 0x02 - Even Parity.
> >
> > + # Parity 0x03 - Odd Parity.
> >
> > + # Parity 0x04 - Mark Parity.
> >
> > + # Parity 0x05 - Space Parity.
> >
> > +
> >
> gMinPlatformPkgTokenSpaceGuid.PcdSerialTerminalParity|0x1|UINT8|0x900
> > 0001C
> >
> > +
> >
> > + # The number of stop bits for the UART style device.
> >
> > + # Stop Bits 0x00 - Default Stop Bits.
> >
> > + # Stop Bits 0x01 - 1 Stop Bit.
> >
> > + # Stop Bits 0x02 - 1.5 Stop Bits.
> >
> > + # Stop Bits 0x03 - 2 Stop Bits.
> >
> > +
> >
> gMinPlatformPkgTokenSpaceGuid.PcdSerialTerminalStopBits|0x1|UINT8|0x9
> > 000001D
> >
> > +
> >
> > [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
> >
> >
> >
> > ##
> >
> > @@ -318,3 +342,4 @@
> > gMinPlatformPkgTokenSpaceGuid.PcdTpm2Enable
> > |FALSE|BOOLEAN|0xF00000A5
> >
> >
> >
> gMinPlatformPkgTokenSpaceGuid.PcdSmiHandlerProfileEnable|FALSE|BOOLE
> > AN|0xF00000A6
> >
> > gMinPlatformPkgTokenSpaceGuid.PcdPerformanceEnable
> > |FALSE|BOOLEAN|0xF00000A7
> >
> > + gMinPlatformPkgTokenSpaceGuid.PcdSerialTerminalEnable
> > |FALSE|BOOLEAN|0xF00000B0
> >
> > diff --git a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
> > b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
> > index 112ddff7d9..d0b5593817 100644
> > --- a/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
> > +++ b/Platform/Intel/MinPlatformPkg/MinPlatformPkg.dsc
> > @@ -1,7 +1,7 @@
> > ## @file
> >
> > # Platform description.
> >
> > #
> >
> > -# Copyright (c) 2017 - 2019, Intel Corporation. All rights
> > reserved.<BR>
> >
> > +# Copyright (c) 2017 - 2020, Intel Corporation. All rights
> > +reserved.<BR>
> >
> > #
> >
> > # SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > #
> >
> > @@ -44,6 +44,7 @@
> > gMinPlatformPkgTokenSpaceGuid.PcdTpm2Enable|FALSE
> >
> > gMinPlatformPkgTokenSpaceGuid.PcdPerformanceEnable|FALSE
> >
> > gMinPlatformPkgTokenSpaceGuid.PcdSmiHandlerProfileEnable|FALSE
> >
> > + gMinPlatformPkgTokenSpaceGuid.PcdSerialTerminalEnable|FALSE
> >
> >
> >
> >
> > ##############################################################
> > ##################
> >
> > #
> >
> > --
> > 2.24.0.windows.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#67278):
> > https://edk2.groups.io/g/devel/message/67278
> > Mute This Topic: https://groups.io/mt/78177912/4905953
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > [gaoliming@byosoft.com.cn]
> > -=-=-=-=-=-=
> >
>
>
>
>
>
>
>
prev parent reply other threads:[~2020-11-12 2:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-11 6:16 [Patch V5 1/3] MinPlatformPkg: Add PCDs for Serial Terminal feature Heng Luo
2020-11-11 6:16 ` [Patch V5 2/3] OpenBoardPkg: Configurae PcdSerialTerminalEnable Heng Luo
2020-11-11 6:16 ` [Patch V5 3/3] MinPlatformPkg: Add SerialPortTerminalLib to suport Serial Terminal feature Heng Luo
2020-11-12 1:48 ` 回复: [edk2-devel] [Patch V5 1/3] MinPlatformPkg: Add PCDs for " gaoliming
2020-11-12 2:44 ` Heng Luo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MWHPR11MB180546700F11A516AE3D278D93E70@MWHPR11MB1805.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox