From: "Heng Luo" <heng.luo@intel.com>
To: "Desimone, Nathaniel L" <nathaniel.l.desimone@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Chiu, Chasel" <chasel.chiu@intel.com>
Subject: Re: [PATCH] UpXtreme: Enable USB DCI debug
Date: Mon, 14 Dec 2020 01:31:19 +0000 [thread overview]
Message-ID: <MWHPR11MB18057921B514264513DB63C093C70@MWHPR11MB1805.namprd11.prod.outlook.com> (raw)
In-Reply-To: <MWHPR1101MB2160DB9A43830EC1F4D9AA9FCDCC0@MWHPR1101MB2160.namprd11.prod.outlook.com>
Thank Nate, I will send out patch V2 for review.
> -----Original Message-----
> From: Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>
> Sent: Wednesday, December 9, 2020 6:30 PM
> To: Luo, Heng <heng.luo@intel.com>; devel@edk2.groups.io
> Cc: Chiu, Chasel <chasel.chiu@intel.com>
> Subject: RE: [PATCH] UpXtreme: Enable USB DCI debug
>
> Hi Heng,
>
> Please add a DynamicEx PCD to control the enable/disable of DCI to
> WhiskeyLakeOpenBoardPkg. It is probably not a good idea from a security
> standpoint to have the default configuration leave JTAG enabled and open.
> Other than that, look's good!
>
> Thanks,
> Nate
>
> > -----Original Message-----
> > From: Luo, Heng <heng.luo@intel.com>
> > Sent: Thursday, November 19, 2020 9:23 PM
> > To: devel@edk2.groups.io
> > Cc: Chiu, Chasel <chasel.chiu@intel.com>; Desimone, Nathaniel L
> > <nathaniel.l.desimone@intel.com>
> > Subject: [PATCH] UpXtreme: Enable USB DCI debug
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3081
> >
> > Allow to debug BIOS via DCI cable.
> >
> > Cc: Chasel Chiu <chasel.chiu@intel.com>
> > Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
> > Signed-off-by: Heng Luo <heng.luo@intel.com>
> > ---
> >
> >
> Platform/Intel/WhiskeylakeOpenBoardPkg/Policy/Library/PeiPolicyUpdateLi
> > b/PeiPchPolicyUpdatePreMem.c | 1 -
> >
> >
> Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBoar
> > dConfigLib/PeiCpuPolicyBoardConfig.c | 5 +++++
> >
> >
> Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBoar
> > dConfigLib/PeiPchPolicyBoardConfigPreMem.c | 7 +++++++
> >
> >
> Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBoar
> > dConfigLib/PeiPolicyBoardConfigLib.inf | 1 +
> >
> >
> Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/PeiPol
> > icyBoardConfigLib/PeiPchPolicyBoardConfigPreMem.c | 6 ++++++
> >
> >
> Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/PeiPol
> > icyBoardConfigLib/PeiPolicyBoardConfigLib.inf | 1 +
> > 6 files changed, 20 insertions(+), 1 deletion(-)
> >
> > diff --git
> > a/Platform/Intel/WhiskeylakeOpenBoardPkg/Policy/Library/PeiPolicyUpdat
> > e
> > Lib/PeiPchPolicyUpdatePreMem.c
> > b/Platform/Intel/WhiskeylakeOpenBoardPkg/Policy/Library/PeiPolicyUpdat
> > e
> > Lib/PeiPchPolicyUpdatePreMem.c
> > index 2d48b09175..ac5b583f89 100644
> > ---
> > a/Platform/Intel/WhiskeylakeOpenBoardPkg/Policy/Library/PeiPolicyUpdat
> > e
> > Lib/PeiPchPolicyUpdatePreMem.c
> > +++
> > b/Platform/Intel/WhiskeylakeOpenBoardPkg/Policy/Library/PeiPolicyUpdat
> > e
> > Lib/PeiPchPolicyUpdatePreMem.c
> > @@ -83,7 +83,6 @@ UpdatePeiPchPolicyPreMem (
> > Status = GetConfigBlock ((VOID *) SiPreMemPolicy,
> > &gIshPreMemConfigGuid, (VOID *) &IshPreMemConfig);
> >
> > ASSERT_EFI_ERROR (Status);
> >
> >
> >
> > - DciPreMemConfig->DciUsb3TypecUfpDbg = 2;
> >
> > PchTraceHubPreMemConfig->MemReg0Size = 3;
> >
> > PchTraceHubPreMemConfig->MemReg1Size = 3;
> >
> > //
> >
> > diff --git
> >
> a/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiCpuPolicyBoardConfig.c
> >
> b/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiCpuPolicyBoardConfig.c
> > index d1d1920823..d4c5136c0a 100644
> > ---
> >
> a/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiCpuPolicyBoardConfig.c
> > +++
> >
> b/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiCpuPolicyBoardConfig.c
> > @@ -44,6 +44,11 @@ UpdatePeiCpuPolicyBoardConfig (
> > Status = GetConfigBlock ((VOID *) SiPolicyPpi, &gCpuConfigGuid,
> > (VOID *) &CpuConfig);
> >
> > ASSERT_EFI_ERROR (Status);
> >
> >
> >
> > + //
> >
> > + //Enable processor debug features
> >
> > + //
> >
> > + CpuConfig->DebugInterfaceEnable = 1;
> >
> > +
> >
> > return Status;
> >
> > }
> >
> >
> >
> > diff --git
> >
> a/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> >
> b/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> > index 01bb75525b..c79718f4ee 100644
> > ---
> >
> a/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> > +++
> >
> b/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> > @@ -25,12 +25,19 @@ UpdatePeiPchPolicyBoardConfigPreMem ( {
> >
> > EFI_STATUS Status;
> >
> > PCH_GENERAL_PREMEM_CONFIG *PchGeneralPreMemConfig;
> >
> > + PCH_DCI_PREMEM_CONFIG *DciPreMemConfig;
> >
> >
> >
> > DEBUG((DEBUG_INFO, "Updating PCH Policy by board config in Pre
> > Mem\n"));
> >
> >
> >
> > Status = GetConfigBlock ((VOID *) SiPreMemPolicyPpi,
> > &gPchGeneralPreMemConfigGuid, (VOID *) &PchGeneralPreMemConfig);
> >
> > ASSERT_EFI_ERROR (Status);
> >
> >
> >
> > + Status = GetConfigBlock ((VOID *) SiPreMemPolicyPpi,
> > &gDciPreMemConfigGuid, (VOID *) &DciPreMemConfig);
> >
> > + ASSERT_EFI_ERROR (Status);
> >
> > +
> >
> > + DciPreMemConfig->PlatformDebugConsent = 3;
> >
> > + DciPreMemConfig->DciUsb3TypecUfpDbg = 1;
> >
> > +
> >
> > return Status;
> >
> > }
> >
> >
> >
> > diff --git
> >
> a/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPolicyBoardConfigLib.inf
> >
> b/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPolicyBoardConfigLib.inf
> > index aaf0abbf04..affb322c59 100644
> > ---
> >
> a/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPolicyBoardConfigLib.inf
> > +++
> >
> b/Platform/Intel/WhiskeylakeOpenBoardPkg/UpXtreme/Library/PeiPolicyBo
> > ardConfigLib/PeiPolicyBoardConfigLib.inf
> > @@ -54,6 +54,7 @@
> > gPchGeneralConfigGuid ## CONSUMES
> >
> > gEfiTpmDeviceInstanceTpm20DtpmGuid
> >
> > gEfiTpmDeviceInstanceTpm12Guid
> >
> > + gDciPreMemConfigGuid
> >
> >
> >
> > [Ppis]
> >
> > gEfiPeiReadOnlyVariable2PpiGuid ## CONSUMES
> >
> > diff --git
> > a/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> > b/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> > index 00cf73dfd9..5d75bc5e1c 100644
> > ---
> > a/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> > +++
> > b/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPchPolicyBoardConfigPreMem.c
> > @@ -25,12 +25,18 @@ UpdatePeiPchPolicyBoardConfigPreMem ( {
> >
> > EFI_STATUS Status;
> >
> > PCH_GENERAL_PREMEM_CONFIG *PchGeneralPreMemConfig;
> >
> > + PCH_DCI_PREMEM_CONFIG *DciPreMemConfig;
> >
> >
> >
> > DEBUG((DEBUG_INFO, "Updating PCH Policy by board config in Pre
> > Mem\n"));
> >
> >
> >
> > Status = GetConfigBlock ((VOID *) SiPreMemPolicyPpi,
> > &gPchGeneralPreMemConfigGuid, (VOID *) &PchGeneralPreMemConfig);
> >
> > ASSERT_EFI_ERROR (Status);
> >
> >
> >
> > + Status = GetConfigBlock ((VOID *) SiPreMemPolicyPpi,
> > &gDciPreMemConfigGuid, (VOID *) &DciPreMemConfig);
> >
> > + ASSERT_EFI_ERROR (Status);
> >
> > +
> >
> > + DciPreMemConfig->DciUsb3TypecUfpDbg = 2;
> >
> > +
> >
> > return Status;
> >
> > }
> >
> >
> >
> > diff --git
> > a/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPolicyBoardConfigLib.inf
> > b/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPolicyBoardConfigLib.inf
> > index 15ef223050..5de11d62e4 100644
> > ---
> > a/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPolicyBoardConfigLib.inf
> > +++
> > b/Platform/Intel/WhiskeylakeOpenBoardPkg/WhiskeylakeURvp/Library/Pei
> > PolicyBoardConfigLib/PeiPolicyBoardConfigLib.inf
> > @@ -54,6 +54,7 @@
> > gPchGeneralConfigGuid ## CONSUMES
> >
> > gEfiTpmDeviceInstanceTpm20DtpmGuid
> >
> > gEfiTpmDeviceInstanceTpm12Guid
> >
> > + gDciPreMemConfigGuid
> >
> >
> >
> > [Ppis]
> >
> > gEfiPeiReadOnlyVariable2PpiGuid ## CONSUMES
> >
> > --
> > 2.24.0.windows.2
prev parent reply other threads:[~2020-12-14 1:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-20 5:23 [PATCH] UpXtreme: Enable USB DCI debug Heng Luo
2020-12-09 10:30 ` Nate DeSimone
2020-12-14 1:31 ` Heng Luo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MWHPR11MB18057921B514264513DB63C093C70@MWHPR11MB1805.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox