From: "Heng Luo" <heng.luo@intel.com>
To: Takuto Naito <naitaku@gmail.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Chaganty, Rangasai V" <rangasai.v.chaganty@intel.com>,
"Desimone, Nathaniel L" <nathaniel.l.desimone@intel.com>
Subject: Re: [PATCH edk2-platforms v1 1/1] TigerlakeOpenBoardPkg/TigerlakeURvp: Fix build errors with GCC5
Date: Thu, 18 Feb 2021 02:34:21 +0000 [thread overview]
Message-ID: <MWHPR11MB180596C8C3546BAB3B36829693859@MWHPR11MB1805.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20210214155333.21424-1-naitaku@gmail.com>
Hi Naito,
Thank you for your patch to resolve the problem.
Basically this patch looks good to me, some suggestions:
1. I have submitted a Bugzilla https://bugzilla.tianocore.org/show_bug.cgi?id=3224 for this issue, could you add it in your commit message?
TigerlakeOpenBoardPkg/TigerlakeURvp: Fix build errors with GCC5
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3224
This change fixes build errors of TigerlakeURvp with GCC5.
- Fix the path of TigerLakeFspBinPkg
...
2. could you spite this patch into 2 patches? One is for Platform/Intel/TigerlakeOpenBoardPkg, another one is for edk2-platforms\Silicon\Intel\TigerlakeSiliconPkg?
3. I face below error when I apply your patch:
C:\bios\open\edk2-platforms>git am -3 "..\[PATCH-edk2-platforms-v1-1-1]-TigerlakeOpenBoardPkg-TigerlakeURvp-Fix-build-errors-with-GCC5.patch"
Applying: TigerlakeOpenBoardPkg/TigerlakeURvp: Fix build errors with GCC5
error: patch fragment without header at line 24: @@ -52,7 +52,7 @@
error: could not build fake ancestor
hint: Use 'git am --show-current-patch' to see the failed patch
Looks it is the line ending issue, there is double '\n' in some lines. Problem can be resolved after replacing "\n\n" with "\n".
Thank,
Heng
> -----Original Message-----
> From: Takuto Naito <naitaku@gmail.com>
> Sent: Sunday, February 14, 2021 11:54 PM
> To: devel@edk2.groups.io
> Cc: Chaganty, Rangasai V <rangasai.v.chaganty@intel.com>; Desimone,
> Nathaniel L <nathaniel.l.desimone@intel.com>; Luo, Heng
> <heng.luo@intel.com>; Takuto Naito <naitaku@gmail.com>
> Subject: [PATCH edk2-platforms v1 1/1] TigerlakeOpenBoardPkg/TigerlakeURvp:
> Fix build errors with GCC5
>
> This change fixes build errors of TigerlakeURvp with GCC5.
>
> - Fix the path of TigerLakeFspBinPkg
>
> - Fix misuse of RETURN_ERROR
>
> - Fix the Teton Glacier Endpoint entry in mPciDeviceTable
>
> - Remove unused function CheckNationalSio.
>
>
>
> Signed-off-by: Takuto Naito <naitaku@gmail.com>
>
> ---
>
> I tried to build TigerlakeURvp, but I faced some build errors.
>
> This patch fixes the build errors.
>
>
>
> Build error 1:
>
> Platform/Intel/TigerlakeOpenBoardPkg/FspWrapper/Library/PeiFspPolicyInitLib/
> PeiFspPolicyInitLib.inf(55): error 000E: File/directory not found in workspace
>
> TigerLakeFspBinPkg/TigerLakeFspBinPkg.dec is not found in packages path:
>
> It seems that the correct path is
> TigerLakeFspBinPkg/Client/TigerLakeFspBinPkg.dec.
>
>
>
> Build error 2:
>
> Platform/Intel/TigerlakeOpenBoardPkg/Policy/Library/DxeSiliconPolicyUpdateLi
> b/DxeSiliconPolicyUpdateLate.c:91:5: note: in expansion of macro
> ‘RETURN_ERROR’
>
> 91 | RETURN_ERROR (Status);
>
> | ^~~~~~~~~~~~
>
> It seems that ASSERT_EFI_ERROR should be here instead of RETURN_ERROR.
>
>
>
> Build error 3:
>
> Silicon/Intel/TigerlakeSiliconPkg/IpBlock/PcieRp/LibraryPrivate/DxePchPcieRpPo
> licyLib/DxePchPcieRpPolicyLib.c:18:77: error: missing braces around initializer [-
> Werror=missing-braces]
>
> 18 | GLOBAL_REMOVE_IF_UNREFERENCED PCH_PCIE_DEVICE_OVERRIDE
> mPcieDeviceTable[] = {
>
> | ^
>
> ......
>
> 101 | { 0x8086, 0x0975, 0xff, 0, 0, 0, PchPcieL1SubstatesOverride, 0, 0xff,
> 0x3C, 0, 5, 0, 0, 0, 0 },
>
> | { }
>
>
>
> The number of the fields seems to be wrong.
>
>
>
> Build error 4:
>
> Platform/Intel/TigerlakeOpenBoardPkg/Library/BasePlatformHookLib/BasePlatf
> ormHookLib.c:105:1: error: ‘CheckNationalSio’ defined but not used [-
> Werror=unused-function]
>
>
>
> CheckNationalSio function needed to be removed.
>
>
>
>
>
> .../PeiFspPolicyInitLib.inf | 2 +-
>
> .../BasePlatformHookLib/BasePlatformHookLib.c | 188 ------------------
>
> .../DxeSiliconPolicyUpdateLate.c | 2 +-
>
> .../DxePchPcieRpPolicyLib.c | 2 +-
>
> 4 files changed, 3 insertions(+), 191 deletions(-)
>
>
>
> diff --git
> a/Platform/Intel/TigerlakeOpenBoardPkg/FspWrapper/Library/PeiFspPolicyInitLi
> b/PeiFspPolicyInitLib.inf
> b/Platform/Intel/TigerlakeOpenBoardPkg/FspWrapper/Library/PeiFspPolicyInitLi
> b/PeiFspPolicyInitLib.inf
>
> index 9d85d855f5..708fbac08f 100644
>
> ---
> a/Platform/Intel/TigerlakeOpenBoardPkg/FspWrapper/Library/PeiFspPolicyInitLi
> b/PeiFspPolicyInitLib.inf
>
> +++
> b/Platform/Intel/TigerlakeOpenBoardPkg/FspWrapper/Library/PeiFspPolicyInitLi
> b/PeiFspPolicyInitLib.inf
>
> @@ -52,7 +52,7 @@
>
> MdeModulePkg/MdeModulePkg.dec
>
> IntelFsp2Pkg/IntelFsp2Pkg.dec
>
> TigerlakeSiliconPkg/SiPkg.dec
>
> - TigerLakeFspBinPkg/TigerLakeFspBinPkg.dec
>
> + TigerLakeFspBinPkg/Client/TigerLakeFspBinPkg.dec
>
> TigerlakeOpenBoardPkg/OpenBoardPkg.dec
>
> UefiCpuPkg/UefiCpuPkg.dec
>
> IntelSiliconPkg/IntelSiliconPkg.dec
>
> diff --git
> a/Platform/Intel/TigerlakeOpenBoardPkg/Library/BasePlatformHookLib/BasePl
> atformHookLib.c
> b/Platform/Intel/TigerlakeOpenBoardPkg/Library/BasePlatformHookLib/BasePl
> atformHookLib.c
>
> index 6209e50450..cc5337698b 100644
>
> ---
> a/Platform/Intel/TigerlakeOpenBoardPkg/Library/BasePlatformHookLib/BasePl
> atformHookLib.c
>
> +++
> b/Platform/Intel/TigerlakeOpenBoardPkg/Library/BasePlatformHookLib/BasePl
> atformHookLib.c
>
> @@ -94,194 +94,6 @@ GLOBAL_REMOVE_IF_UNREFERENCED EFI_SIO_TABLE
> mSioTableWinbond_x374[] = {
>
> {0x30, 0x01} // Enable it with Activation bit
>
> };
>
>
>
> -/**
>
> - Detect if a National 393 SIO is docked. If yes, enable the docked SIO
>
> - and its serial port, and disable the onboard serial port.
>
> -
>
> - @retval EFI_SUCCESS Operations performed successfully.
>
> -**/
>
> -STATIC
>
> -VOID
>
> -CheckNationalSio (
>
> - VOID
>
> - )
>
> -{
>
> - UINT8 Data8;
>
> -
>
> - //
>
> - // Pc87393 access is through either (0x2e, 0x2f) or (0x4e, 0x4f).
>
> - // We use (0x2e, 0x2f) which is determined by BADD default strapping
>
> - //
>
> -
>
> - //
>
> - // Read the Pc87393 signature
>
> - //
>
> - IoWrite8 (0x2e, 0x20);
>
> - Data8 = IoRead8 (0x2f);
>
> -
>
> - if (Data8 == 0xea) {
>
> - //
>
> - // Signature matches - National PC87393 SIO is docked
>
> - //
>
> -
>
> - //
>
> - // Enlarge the LPC decode scope to accommodate the Docking LPC Switch
>
> - // Register (SIO_DOCKING_LPC_SWITCH_REGISTER_ADDRESS is allocated at
>
> - // SIO_BASE_ADDRESS + 0x10)
>
> - //
>
> - PchLpcGenIoRangeSet ((FixedPcdGet16 (PcdSioBaseAddress) &
> (UINT16)~0x7F), 0x20);
>
> -
>
> - //
>
> - // Enable port switch
>
> - //
>
> - IoWrite8 (SIO_DOCKING_LPC_SWITCH_REGISTER_ADDRESS, 0x06);
>
> -
>
> - //
>
> - // Turn on docking power
>
> - //
>
> - IoWrite8 (FixedPcdGet16 (PcdSioBaseAddress) + 0x0E, 0x8c);
>
> -
>
> - IoWrite8 (FixedPcdGet16 (PcdSioBaseAddress) + 0x0E, 0x9c);
>
> -
>
> - IoWrite8 (FixedPcdGet16 (PcdSioBaseAddress) + 0x0E, 0xBc);
>
> -
>
> - //
>
> - // Enable port switch
>
> - //
>
> - IoWrite8 (SIO_DOCKING_LPC_SWITCH_REGISTER_ADDRESS, 0x7);
>
> -
>
> - //
>
> - // GPIO setting
>
> - //
>
> - IoWrite8 (0x2e, 0x24);
>
> - IoWrite8 (0x2f, 0x29);
>
> -
>
> - //
>
> - // Enable chip clock
>
> - //
>
> - IoWrite8 (0x2e, 0x29);
>
> - IoWrite8 (0x2f, 0x1e);
>
> -
>
> -
>
> - //
>
> - // Enable serial port
>
> - //
>
> -
>
> - //
>
> - // Select com1
>
> - //
>
> - IoWrite8 (0x2e, 0x7);
>
> - IoWrite8 (0x2f, 0x3);
>
> -
>
> - //
>
> - // Base address: 0x3f8
>
> - //
>
> - IoWrite8 (0x2e, 0x60);
>
> - IoWrite8 (0x2f, 0x03);
>
> - IoWrite8 (0x2e, 0x61);
>
> - IoWrite8 (0x2f, 0xf8);
>
> -
>
> - //
>
> - // Interrupt: 4
>
> - //
>
> - IoWrite8 (0x2e, 0x70);
>
> - IoWrite8 (0x2f, 0x04);
>
> -
>
> - //
>
> - // Enable bank selection
>
> - //
>
> - IoWrite8 (0x2e, 0xf0);
>
> - IoWrite8 (0x2f, 0x82);
>
> -
>
> - //
>
> - // Activate
>
> - //
>
> - IoWrite8 (0x2e, 0x30);
>
> - IoWrite8 (0x2f, 0x01);
>
> -
>
> - //
>
> - // Disable onboard serial port
>
> - //
>
> - IoWrite8 (FixedPcdGet16 (PcdLpcSioConfigDefaultPort), 0x55);
>
> -
>
> - //
>
> - // Power Down UARTs
>
> - //
>
> - IoWrite8 (PcdGet16 (PcdLpcSioIndexPort), 0x2);
>
> - IoWrite8 (PcdGet16 (PcdLpcSioDataPort), 0x00);
>
> -
>
> - //
>
> - // Dissable COM1 decode
>
> - //
>
> - IoWrite8 (PcdGet16 (PcdLpcSioIndexPort), 0x24);
>
> - IoWrite8 (PcdGet16 (PcdLpcSioDataPort), 0);
>
> -
>
> - //
>
> - // Disable COM2 decode
>
> - //
>
> - IoWrite8 (PcdGet16 (PcdLpcSioIndexPort), 0x25);
>
> - IoWrite8 (PcdGet16 (PcdLpcSioDataPort), 0);
>
> -
>
> - //
>
> - // Disable interrupt
>
> - //
>
> - IoWrite8 (PcdGet16 (PcdLpcSioIndexPort), 0x28);
>
> - IoWrite8 (PcdGet16 (PcdLpcSioDataPort), 0x0);
>
> -
>
> - IoWrite8 (FixedPcdGet16 (PcdLpcSioConfigDefaultPort), 0xAA);
>
> -
>
> - //
>
> - // Enable floppy
>
> - //
>
> -
>
> - //
>
> - // Select floppy
>
> - //
>
> - IoWrite8 (0x2e, 0x7);
>
> - IoWrite8 (0x2f, 0x0);
>
> -
>
> - //
>
> - // Base address: 0x3f0
>
> - //
>
> - IoWrite8 (0x2e, 0x60);
>
> - IoWrite8 (0x2f, 0x03);
>
> - IoWrite8 (0x2e, 0x61);
>
> - IoWrite8 (0x2f, 0xf0);
>
> -
>
> - //
>
> - // Interrupt: 6
>
> - //
>
> - IoWrite8 (0x2e, 0x70);
>
> - IoWrite8 (0x2f, 0x06);
>
> -
>
> - //
>
> - // DMA 2
>
> - //
>
> - IoWrite8 (0x2e, 0x74);
>
> - IoWrite8 (0x2f, 0x02);
>
> -
>
> - //
>
> - // Activate
>
> - //
>
> - IoWrite8 (0x2e, 0x30);
>
> - IoWrite8 (0x2f, 0x01);
>
> -
>
> - } else {
>
> -
>
> - //
>
> - // No National pc87393 SIO is docked, turn off dock power and
>
> - // disable port switch
>
> - //
>
> - // IoWrite8 (SIO_BASE_ADDRESS + 0x0E, 0xbf);
>
> - // IoWrite8 (0x690, 0);
>
> -
>
> - //
>
> - // If no National pc87393, just return
>
> - //
>
> - return ;
>
> - }
>
> -}
>
> -
>
> /**
>
> Check whether the IT8628 SIO present on LPC. If yes, enable its serial ports
>
>
>
> diff --git
> a/Platform/Intel/TigerlakeOpenBoardPkg/Policy/Library/DxeSiliconPolicyUpdat
> eLib/DxeSiliconPolicyUpdateLate.c
> b/Platform/Intel/TigerlakeOpenBoardPkg/Policy/Library/DxeSiliconPolicyUpdat
> eLib/DxeSiliconPolicyUpdateLate.c
>
> index 2eee9958be..410a8d1073 100644
>
> ---
> a/Platform/Intel/TigerlakeOpenBoardPkg/Policy/Library/DxeSiliconPolicyUpdat
> eLib/DxeSiliconPolicyUpdateLate.c
>
> +++
> b/Platform/Intel/TigerlakeOpenBoardPkg/Policy/Library/DxeSiliconPolicyUpdat
> eLib/DxeSiliconPolicyUpdateLate.c
>
> @@ -88,8 +88,8 @@ SiliconPolicyUpdateLate (
>
> // GOP Dxe Policy Initialization
>
> //
>
> Status = GopPolicyInitDxe (gImageHandle);
>
> - RETURN_ERROR (Status);
>
> DEBUG ((DEBUG_INFO, "GOP Dxe Policy Initialization done\n"));
>
> + ASSERT_EFI_ERROR (Status);
>
> }
>
>
>
> return Policy;
>
> diff --git
> a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/PcieRp/LibraryPrivate/DxePchPcieRp
> PolicyLib/DxePchPcieRpPolicyLib.c
> b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/PcieRp/LibraryPrivate/DxePchPcieRp
> PolicyLib/DxePchPcieRpPolicyLib.c
>
> index 577e436e32..1553d2e2aa 100644
>
> ---
> a/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/PcieRp/LibraryPrivate/DxePchPcieRp
> PolicyLib/DxePchPcieRpPolicyLib.c
>
> +++
> b/Silicon/Intel/TigerlakeSiliconPkg/IpBlock/PcieRp/LibraryPrivate/DxePchPcieRp
> PolicyLib/DxePchPcieRpPolicyLib.c
>
> @@ -98,7 +98,7 @@ GLOBAL_REMOVE_IF_UNREFERENCED
> PCH_PCIE_DEVICE_OVERRIDE mPcieDeviceTable[] = {
>
> //
>
> // Teton Glacier Endpoint
>
> //
>
> - { 0x8086, 0x0975, 0xff, 0, 0, 0, PchPcieL1SubstatesOverride, 0, 0xff, 0x3C, 0, 5,
> 0, 0, 0, 0 },
>
> + { 0x8086, 0x0975, 0xff, 0, 0, 0, PchPcieL1SubstatesOverride, 0, 0xff, 0x3C, 0, 5,
> 0, 0 },
>
>
>
> //
>
> // End of Table
>
> --
>
> 2.30.1
>
>
prev parent reply other threads:[~2021-02-18 2:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-14 15:53 [PATCH edk2-platforms v1 1/1] TigerlakeOpenBoardPkg/TigerlakeURvp: Fix build errors with GCC5 Takuto Naito
2021-02-18 2:34 ` Heng Luo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MWHPR11MB180596C8C3546BAB3B36829693859@MWHPR11MB1805.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox