* [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector
@ 2021-10-21 0:17 Min Xu
2021-10-21 0:17 ` [PATCH V10 1/4] OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector Min Xu
` (5 more replies)
0 siblings, 6 replies; 9+ messages in thread
From: Min Xu @ 2021-10-21 0:17 UTC (permalink / raw)
To: devel
Cc: Min Xu, Ard Biesheuvel, Gerd Hoffmann, Jordan Justen,
Brijesh Singh, Erdem Aktas, James Bottomley, Jiewen Yao,
Tom Lendacky
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
The patch-sets to support Intel TDX in OvmfPkg is split into several
waves. This is wave-1 which adds Intel TDX support in OvmfPkg/ResetVector.
Note: TDX only works in X64.
Patch #1: Ovmf uses its own Main.asm to reduce the complexity of Main.asm
in UefiCpuPkg. This Main.asm is an unmodified copy from
UefiCpuPkg/ReseteVector/Vtf0 (so no functional change) and the actual
changes for tdx come as incremental patches.
Patch #2: WORK_AREA_GUEST_TYPE is cleared in Main.asm instead of in
WORK_AREA_GUEST_TYPE.
Patch #3: Introduce IntelTdxMetadata.asm which describes the information
about the image for VMM use.
Patch #4: Enable TDX in OvmfPkg/ResetVector for ARCH_X64.
[TDX]: https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-whitepaper-final9-17.pdf
[TDVF]: https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-virtual-firmware-design-guide-rev-1.pdf
Code is at https://github.com/mxu9/edk2/tree/tdvf_wave1.v10
v10 changes:
- Clear the OVMF_WORK_AREA in both ARCH_IA32 and ARCH_X64.
- Update the ReloadFlat32 based on the review comments.
- Other minor changes and update some comments.
v9 changes:
- Introduce IntelTdxMetadata.asm in a separate commit.
- Use absolute offset for the start of TdxMetadata so that VMM can
easily reach to the start of the metadata.
v8 changes:
- Create a separate commit for Main.asm.
- Create a separate commit for the clearance of WORK_AREA_GUEST_TYPE.
- Fix some inaccurate comments.
v7 changes:
- Refine the offset of TdxMetadata and remove the definition of
PcdOvmfImageSizeInKB
- Use MOV CR* instead of smsw in ResetVector
- Remove the new field (SubType) in
CONFIDENTIAL_COMPUTING_WORK_AREA_HEADER.
v6 changes:
- Remove the 5-level paging support. 5-level paging enabling is *NOT*
super critical for TDX enabling at this moment. It will be enabled
later in a separate patch.
- Add a new field (SubType) in CONFIDENTIAL_COMPUTING_WORK_AREA_HEADER
to record the VM Guest SubType.
- In Main16 entry point, after TransitionFromReal16To32BitFlat,
WORK_AREA_GUEST_TYPE is cleared to 0. WORK_AREA_GUEST_TYPE was
previously cleared in SetCr3ForPageTables64 (see commit ab77b60).
This doesn't work after TDX is introduced in Ovmf. It is because all
TDX CPUs (BSP and APs) start to run from 0xfffffff0. In previous code
WORK_AREA_GUEST_TYPE will be cleared multi-times in TDX guest. So for
SEV and Legacy guest it is moved to Main16 entry point (after
TransitionFromReal16To32BitFlat). For TDX guest WORK_AREA_GUEST_TYPE
is cleared and set in InitTdxWorkarea.
- Make the return result of IsTdx be consistent with IsTdxEnabled.
- Fix some typo in the code comments.
v5 changes:
- Remove the changes of OVMF_WORK_AREA because Commit ab77b60 covers
those changes.
- Refine the TDX related changes in PageTables64.asm and
Flat32ToFlat64.asm.
- Add CheckTdxFeaturesBeforeBuildPagetables to check Non-Tdx, Tdx-BSP or
Tdx-APs. This routine is called before building page tables.
v4 changes:
- Refine the PageTables64.asm and Flat32ToFlat64.asm to enable TDX.
- Refine SEV_ES_WORK_AREA so that SEV/TDX/Legach guest all can use this
memory region. https://edk2.groups.io/g/devel/message/78345 is the
discussion.
- AmdSev.asm is removed because Brijesh Singh has done it in
https://edk2.groups.io/g/devel/message/78241.
v3 changes:
- Refine PageTables64.asm and Flat32ToFlat64.asm based on the review
comments in [ReviewComment-1] and [ReviewComment-2].
- SEV codes are in AmdSev.asm
- TDX codes are in IntelTdx.asm
- Main.asm is created in OvmfPkg/ResetVector. The one in
UefiCpuPkg/ResetVector/Vtf0 is not used.
- Init32.asm/ReloadFlat32.asm in UefiCpuPkg/ResetVector/Vtf0/Ia32 are
deleted. They're moved to OvmfPkg/ResetVector/Ia32.
- InitTdx.asm is renamed to InteTdx.asm
v2 changes:
- Move InitTdx.asm and ReloadFlat32.asm from UefiCpuPkg/ResetVector/Vtf0
to OvmfPkg/ResetVector. Init32.asm is created which is a null stub of
32-bit initialization. In Main32 just simply call Init32. It makes
the Main.asm in UefiCpuPkg/ResetVector clean and clear.
- Init32.asm/InitTdx.asm/ReloadFlat32.asm are created under
OvmfPkg/ResetVector/Ia32.
- Update some descriptions of the patch-sets.
- Update the REF link in cover letter.
- Add Ard Biesheuvel in Cc list.
v1: https://edk2.groups.io/g/devel/message/77675
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Min Xu (4):
OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector
OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm
OvmfPkg: Add IntelTdxMetadata.asm
OvmfPkg: Enable TDX in ResetVector
OvmfPkg/OvmfPkg.dec | 9 +
OvmfPkg/OvmfPkgDefines.fdf.inc | 9 +
OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 39 ++++
OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm | 11 +
OvmfPkg/ResetVector/Ia32/IntelTdx.asm | 222 +++++++++++++++++++
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 22 +-
OvmfPkg/ResetVector/Main.asm | 121 ++++++++++
OvmfPkg/ResetVector/ResetVector.inf | 9 +
OvmfPkg/ResetVector/ResetVector.nasmb | 28 +++
OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm | 115 ++++++++++
10 files changed, 581 insertions(+), 4 deletions(-)
create mode 100644 OvmfPkg/ResetVector/Ia32/IntelTdx.asm
create mode 100644 OvmfPkg/ResetVector/Main.asm
create mode 100644 OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm
--
2.29.2.windows.2
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH V10 1/4] OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector
2021-10-21 0:17 [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Min Xu
@ 2021-10-21 0:17 ` Min Xu
2021-10-21 0:17 ` [PATCH V10 2/4] OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm Min Xu
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Min Xu @ 2021-10-21 0:17 UTC (permalink / raw)
To: devel
Cc: Min Xu, Ard Biesheuvel, Jordan Justen, Gerd Hoffmann,
Brijesh Singh, Erdem Aktas, James Bottomley, Jiewen Yao,
Tom Lendacky
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Previously OvmfPkg/ResetVector uses the Main.asm in
UefiCpuPkg/ReseteVector/Vtf0. In this Main.asm there is only Main16
entry point.
This patch-set is to introduce Intel TDX into Ovmf. Main32 entry point
is needed in Main.asm by Intel TDX. To reduce the complexity of Main.asm
in UefiCpuPkg, OvmfPkg create its own Main.asm to meet the requirement
of Intel TDX. This Main.asm is an unmodified copy (so no functional
change) and the actual changes for tdx come as incremental patches.
UefiCpuPkg/ResetVector/Vtf0/main.asm -> OvmfPkg/ResetVector/Main.asm
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
---
OvmfPkg/ResetVector/Main.asm | 103 +++++++++++++++++++++++++++++++++++
1 file changed, 103 insertions(+)
create mode 100644 OvmfPkg/ResetVector/Main.asm
diff --git a/OvmfPkg/ResetVector/Main.asm b/OvmfPkg/ResetVector/Main.asm
new file mode 100644
index 000000000000..ae90a148fce7
--- /dev/null
+++ b/OvmfPkg/ResetVector/Main.asm
@@ -0,0 +1,103 @@
+;------------------------------------------------------------------------------
+; @file
+; Main routine of the pre-SEC code up through the jump into SEC
+;
+; Copyright (c) 2008 - 2009, Intel Corporation. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+;------------------------------------------------------------------------------
+
+
+BITS 16
+
+;
+; Modified: EBX, ECX, EDX, EBP
+;
+; @param[in,out] RAX/EAX Initial value of the EAX register
+; (BIST: Built-in Self Test)
+; @param[in,out] DI 'BP': boot-strap processor, or
+; 'AP': application processor
+; @param[out] RBP/EBP Address of Boot Firmware Volume (BFV)
+; @param[out] DS Selector allowing flat access to all addresses
+; @param[out] ES Selector allowing flat access to all addresses
+; @param[out] FS Selector allowing flat access to all addresses
+; @param[out] GS Selector allowing flat access to all addresses
+; @param[out] SS Selector allowing flat access to all addresses
+;
+; @return None This routine jumps to SEC and does not return
+;
+Main16:
+ OneTimeCall EarlyInit16
+
+ ;
+ ; Transition the processor from 16-bit real mode to 32-bit flat mode
+ ;
+ OneTimeCall TransitionFromReal16To32BitFlat
+
+BITS 32
+
+ ;
+ ; Search for the Boot Firmware Volume (BFV)
+ ;
+ OneTimeCall Flat32SearchForBfvBase
+
+ ;
+ ; EBP - Start of BFV
+ ;
+
+ ;
+ ; Search for the SEC entry point
+ ;
+ OneTimeCall Flat32SearchForSecEntryPoint
+
+ ;
+ ; ESI - SEC Core entry point
+ ; EBP - Start of BFV
+ ;
+
+%ifdef ARCH_IA32
+
+ ;
+ ; Restore initial EAX value into the EAX register
+ ;
+ mov eax, esp
+
+ ;
+ ; Jump to the 32-bit SEC entry point
+ ;
+ jmp esi
+
+%else
+
+ ;
+ ; Transition the processor from 32-bit flat mode to 64-bit flat mode
+ ;
+ OneTimeCall Transition32FlatTo64Flat
+
+BITS 64
+
+ ;
+ ; Some values were calculated in 32-bit mode. Make sure the upper
+ ; 32-bits of 64-bit registers are zero for these values.
+ ;
+ mov rax, 0x00000000ffffffff
+ and rsi, rax
+ and rbp, rax
+ and rsp, rax
+
+ ;
+ ; RSI - SEC Core entry point
+ ; RBP - Start of BFV
+ ;
+
+ ;
+ ; Restore initial EAX value into the RAX register
+ ;
+ mov rax, rsp
+
+ ;
+ ; Jump to the 64-bit SEC entry point
+ ;
+ jmp rsi
+
+%endif
--
2.29.2.windows.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V10 2/4] OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm
2021-10-21 0:17 [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Min Xu
2021-10-21 0:17 ` [PATCH V10 1/4] OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector Min Xu
@ 2021-10-21 0:17 ` Min Xu
2021-10-21 9:28 ` Gerd Hoffmann
2021-10-21 0:17 ` [PATCH V10 3/4] OvmfPkg: Add IntelTdxMetadata.asm Min Xu
` (3 subsequent siblings)
5 siblings, 1 reply; 9+ messages in thread
From: Min Xu @ 2021-10-21 0:17 UTC (permalink / raw)
To: devel
Cc: Min Xu, Ard Biesheuvel, Jordan Justen, Gerd Hoffmann,
Brijesh Singh, Erdem Aktas, James Bottomley, Jiewen Yao,
Tom Lendacky
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Previously WORK_AREA_GUEST_TYPE was cleared in SetCr3ForPageTables64.
This is workable for Legacy guest and SEV guest. But it doesn't work
after Intel TDX is introduced. It is because all TDX CPUs (BSP and APs)
start to run from 0xfffffff0, thus WORK_AREA_GUEST_TYPE will be cleared
multi-times if it is TDX guest. So the clearance of WORK_AREA_GUEST_TYPE
is moved to Main16 entry point in Main.asm.
Note: WORK_AREA_GUEST_TYPE is only defined for ARCH_X64.
For Intel TDX, its corresponding entry point is Main32 (which will be
introduced in next commit in this patch-set). WORK_AREA_GUEST_TYPE will
be cleared there.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
---
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 4 ----
OvmfPkg/ResetVector/Main.asm | 4 ++++
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/OvmfPkg/ResetVector/Ia32/PageTables64.asm b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
index 07b6ca070909..02528221e560 100644
--- a/OvmfPkg/ResetVector/Ia32/PageTables64.asm
+++ b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
@@ -42,10 +42,6 @@ BITS 32
;
SetCr3ForPageTables64:
- ; Clear the WorkArea header. The SEV probe routines will populate the
- ; work area when detected.
- mov byte[WORK_AREA_GUEST_TYPE], 0
-
; Check whether the SEV is active and populate the SevEsWorkArea
OneTimeCall CheckSevFeatures
diff --git a/OvmfPkg/ResetVector/Main.asm b/OvmfPkg/ResetVector/Main.asm
index ae90a148fce7..bbfeac1c88bc 100644
--- a/OvmfPkg/ResetVector/Main.asm
+++ b/OvmfPkg/ResetVector/Main.asm
@@ -36,6 +36,10 @@ Main16:
BITS 32
+ ; Clear the WorkArea header. The SEV probe routines will populate the
+ ; work area when detected.
+ mov byte[WORK_AREA_GUEST_TYPE], 0
+
;
; Search for the Boot Firmware Volume (BFV)
;
--
2.29.2.windows.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V10 3/4] OvmfPkg: Add IntelTdxMetadata.asm
2021-10-21 0:17 [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Min Xu
2021-10-21 0:17 ` [PATCH V10 1/4] OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector Min Xu
2021-10-21 0:17 ` [PATCH V10 2/4] OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm Min Xu
@ 2021-10-21 0:17 ` Min Xu
2021-10-21 0:17 ` [PATCH V10 4/4] OvmfPkg: Enable TDX in ResetVector Min Xu
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Min Xu @ 2021-10-21 0:17 UTC (permalink / raw)
To: devel
Cc: Min Xu, Ard Biesheuvel, Jordan Justen, Gerd Hoffmann,
Brijesh Singh, Erdem Aktas, James Bottomley, Jiewen Yao,
Tom Lendacky
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In TDX when host VMM creates a new guest TD, some initial set of
TD-private pages are added using the TDH.MEM.PAGE.ADD function. These
pages typically contain Virtual BIOS code and data along with some clear
pages for stacks and heap. In the meanwhile, some configuration data
need be measured by host VMM. Tdx Metadata is designed for this purpose
to indicate host VMM how to do the above tasks.
More detailed information of Metadata is in [TDVF] Section 11.
Tdx Metadata describes the information about the image for VMM use.
For example, the base address and length of the TdHob, Bfv, Cfv, etc.
The offset of the Metadata is stored in a GUID-ed structure which is
appended in the GUID-ed chain from a fixed GPA (0xffffffd0).
In this commit there are 2 new definitions of BFV & CFV.
Tdx Virtual Firmware (TDVF) includes one Firmware Volume (FV) known
as the Boot Firmware Volume (BFV). The FV format is defined in the
UEFI Platform Initialization (PI) spec. BFV includes all TDVF
components required during boot.
TDVF also include a configuration firmware volume (CFV) that is
separated from the BFV. The reason is because the CFV is measured in
RTMR, while the BFV is measured in MRTD.
In practice BFV is the code part of Ovmf image (OVMF_CODE.fd). CFV is
the vars part of Ovmf image (OVMF_VARS.fd).
Since AMD SEV has already defined some SEV specific memory region in
MEMFD. TDX re-uses some of the memory regions defined by SEV.
- MailBox : PcdOvmfSecGhcbBackupBase|PcdOvmfSecGhcbBackupSize
- TdHob : PcdOvmfSecGhcbBase|PcdOvmfSecGhcbSize
[TDVF] https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-virtual-firmware-design-guide-rev-1.pdf
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
---
OvmfPkg/OvmfPkg.dec | 9 ++
OvmfPkg/OvmfPkgDefines.fdf.inc | 9 ++
OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 19 +++
OvmfPkg/ResetVector/ResetVector.inf | 9 ++
OvmfPkg/ResetVector/ResetVector.nasmb | 27 +++++
OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm | 115 +++++++++++++++++++
6 files changed, 188 insertions(+)
create mode 100644 OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm
diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index 1be8d5dccbc7..340d83f794d0 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -340,6 +340,15 @@
# header definition.
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfConfidentialComputingWorkAreaHeader|4|UINT32|0x51
+ ## The base address and size of the TDX Cfv base and size.
+ gUefiOvmfPkgTokenSpaceGuid.PcdCfvBase|0|UINT32|0x52
+ gUefiOvmfPkgTokenSpaceGuid.PcdCfvRawDataOffset|0|UINT32|0x53
+ gUefiOvmfPkgTokenSpaceGuid.PcdCfvRawDataSize|0|UINT32|0x54
+
+ ## The base address and size of the TDX Bfv base and size.
+ gUefiOvmfPkgTokenSpaceGuid.PcdBfvBase|0|UINT32|0x55
+ gUefiOvmfPkgTokenSpaceGuid.PcdBfvRawDataOffset|0|UINT32|0x56
+ gUefiOvmfPkgTokenSpaceGuid.PcdBfvRawDataSize|0|UINT32|0x57
[PcdsDynamic, PcdsDynamicEx]
gUefiOvmfPkgTokenSpaceGuid.PcdEmuVariableEvent|0|UINT64|2
diff --git a/OvmfPkg/OvmfPkgDefines.fdf.inc b/OvmfPkg/OvmfPkgDefines.fdf.inc
index 3b5e45253916..6170c5993ce5 100644
--- a/OvmfPkg/OvmfPkgDefines.fdf.inc
+++ b/OvmfPkg/OvmfPkgDefines.fdf.inc
@@ -9,6 +9,7 @@
##
DEFINE BLOCK_SIZE = 0x1000
+DEFINE VARS_OFFSET = 0
#
# A firmware binary built with FD_SIZE_IN_KB=1024, and a firmware binary built
@@ -88,6 +89,14 @@ SET gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize = $(VARS_SPARE_
# Computing Work Area header defined in the Include/WorkArea.h
SET gUefiOvmfPkgTokenSpaceGuid.PcdOvmfConfidentialComputingWorkAreaHeader = 4
+SET gUefiOvmfPkgTokenSpaceGuid.PcdCfvBase = $(FW_BASE_ADDRESS)
+SET gUefiOvmfPkgTokenSpaceGuid.PcdCfvRawDataOffset = $(VARS_OFFSET)
+SET gUefiOvmfPkgTokenSpaceGuid.PcdCfvRawDataSize = $(VARS_SIZE)
+
+SET gUefiOvmfPkgTokenSpaceGuid.PcdBfvBase = $(CODE_BASE_ADDRESS)
+SET gUefiOvmfPkgTokenSpaceGuid.PcdBfvRawDataOffset = $(VARS_SIZE)
+SET gUefiOvmfPkgTokenSpaceGuid.PcdBfvRawDataSize = $(CODE_SIZE)
+
!if $(SMM_REQUIRE) == TRUE
SET gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64 = gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageVariableBase
SET gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase = gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageFtwWorkingBase
diff --git a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
index 7ec3c6e980c3..7be43fb44a69 100644
--- a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
+++ b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
@@ -47,6 +47,25 @@ TIMES (15 - ((guidedStructureEnd - guidedStructureStart + 15) % 16)) DB 0
;
guidedStructureStart:
+%ifdef ARCH_X64
+;
+; TDX Metadata offset block
+;
+; TdxMetadata.asm is included in ARCH_X64 because Inte TDX is only
+; available in ARCH_X64. Below block describes the offset of
+; TdxMetadata block in Ovmf image
+;
+; GUID : e47a6535-984a-4798-865e-4685a7bf8ec2
+;
+tdxMetadataOffsetStart:
+ DD fourGigabytes - TdxMetadataGuid - 16
+ DW tdxMetadataOffsetEnd - tdxMetadataOffsetStart
+ DB 0x35, 0x65, 0x7a, 0xe4, 0x4a, 0x98, 0x98, 0x47
+ DB 0x86, 0x5e, 0x46, 0x85, 0xa7, 0xbf, 0x8e, 0xc2
+tdxMetadataOffsetEnd:
+
+%endif
+
; SEV Hash Table Block
;
; This describes the guest ram area where the hypervisor should
diff --git a/OvmfPkg/ResetVector/ResetVector.inf b/OvmfPkg/ResetVector/ResetVector.inf
index a2520dde5508..320e5f2c6527 100644
--- a/OvmfPkg/ResetVector/ResetVector.inf
+++ b/OvmfPkg/ResetVector/ResetVector.inf
@@ -44,6 +44,15 @@
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBackupBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBackupSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdCfvBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdCfvRawDataOffset
+ gUefiOvmfPkgTokenSpaceGuid.PcdCfvRawDataSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdBfvBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdBfvRawDataOffset
+ gUefiOvmfPkgTokenSpaceGuid.PcdBfvRawDataSize
[FixedPcd]
gUefiOvmfPkgTokenSpaceGuid.PcdSevLaunchSecretBase
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb b/OvmfPkg/ResetVector/ResetVector.nasmb
index 21b5fd82b830..eb9733e40256 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -69,6 +69,31 @@
%error "This implementation inherently depends on PcdOvmfSecGhcbBase not straddling a 2MB boundary"
%endif
+ %define TDX_BFV_RAW_DATA_OFFSET FixedPcdGet32 (PcdBfvRawDataOffset)
+ %define TDX_BFV_RAW_DATA_SIZE FixedPcdGet32 (PcdBfvRawDataSize)
+ %define TDX_BFV_MEMORY_BASE FixedPcdGet32 (PcdBfvBase)
+ %define TDX_BFV_MEMORY_SIZE FixedPcdGet32 (PcdBfvRawDataSize)
+
+ %define TDX_CFV_RAW_DATA_OFFSET FixedPcdGet32 (PcdCfvRawDataOffset)
+ %define TDX_CFV_RAW_DATA_SIZE FixedPcdGet32 (PcdCfvRawDataSize)
+ %define TDX_CFV_MEMORY_BASE FixedPcdGet32 (PcdCfvBase),
+ %define TDX_CFV_MEMORY_SIZE FixedPcdGet32 (PcdCfvRawDataSize),
+
+ %define TDX_HEAP_STACK_BASE FixedPcdGet32 (PcdOvmfSecPeiTempRamBase)
+ %define TDX_HEAP_STACK_SIZE FixedPcdGet32 (PcdOvmfSecPeiTempRamSize)
+
+ %define TDX_HOB_MEMORY_BASE FixedPcdGet32 (PcdOvmfSecGhcbBase)
+ %define TDX_HOB_MEMORY_SIZE FixedPcdGet32 (PcdOvmfSecGhcbSize)
+
+ %define TDX_INIT_MEMORY_BASE FixedPcdGet32 (PcdOvmfWorkAreaBase)
+ %define TDX_INIT_MEMORY_SIZE (FixedPcdGet32 (PcdOvmfWorkAreaSize) + FixedPcdGet32 (PcdOvmfSecGhcbBackupSize))
+
+ %define OVMF_PAGE_TABLE_BASE FixedPcdGet32 (PcdOvmfSecPageTablesBase)
+ %define OVMF_PAGE_TABLE_SIZE FixedPcdGet32 (PcdOvmfSecPageTablesSize)
+
+ %define TDX_WORK_AREA_PGTBL_READY (FixedPcdGet32 (PcdOvmfWorkAreaBase) + 4)
+ %define TDX_WORK_AREA_GPAW (FixedPcdGet32 (PcdOvmfWorkAreaBase) + 8)
+
%define PT_ADDR(Offset) (FixedPcdGet32 (PcdOvmfSecPageTablesBase) + (Offset))
%define GHCB_PT_ADDR (FixedPcdGet32 (PcdOvmfSecGhcbPageTableBase))
@@ -78,6 +103,8 @@
%define SEV_ES_WORK_AREA_RDRAND (FixedPcdGet32 (PcdSevEsWorkAreaBase) + 8)
%define SEV_ES_WORK_AREA_ENC_MASK (FixedPcdGet32 (PcdSevEsWorkAreaBase) + 16)
%define SEV_ES_VC_TOP_OF_STACK (FixedPcdGet32 (PcdOvmfSecPeiTempRamBase) + FixedPcdGet32 (PcdOvmfSecPeiTempRamSize))
+
+%include "X64/IntelTdxMetadata.asm"
%include "Ia32/Flat32ToFlat64.asm"
%include "Ia32/AmdSev.asm"
%include "Ia32/PageTables64.asm"
diff --git a/OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm b/OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm
new file mode 100644
index 000000000000..07f89ef4931f
--- /dev/null
+++ b/OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm
@@ -0,0 +1,115 @@
+;------------------------------------------------------------------------------
+; @file
+; Tdx Virtual Firmware metadata
+;
+; When host VMM creates a new guest TD, some initial set of TD-private pages
+; are added using the TDH.MEM.PAGE.ADD function. These pages typically contain
+; Virtual BIOS code and data along with some clear pages for stacks and heap.
+; In the meanwhile, some configuration data need be measured by host VMM.
+; Tdx Metadata is designed for this purpose to indicate host VMM how to do the
+; above tasks.
+;
+; Tdx Metadata consists of a DESCRIPTOR as the header followed by several
+; SECTIONs. Host VMM sets up the memory for TDVF according to these sections.
+;
+; _Bfv is the example (Bfv refers to the Virtual BIOS code).
+; - By DataOffset/RawDataSize host VMM knows about the position of the code
+; in the binary image.
+; - MemoryAddress/MemoryDataSize indicates the guest physical address/size of
+; the Bfv to be loaded.
+; - Type field means this section is of BFV. This field is designed for the
+; purpose that in some case host VMM may do some additional processing based
+; upon the section type. TdHob section is an example. Host VMM pass the
+; physical memory information to the guest firmware by writing the data in
+; the memory region designated by TdHob section.
+; - By design code part of the binary image (Bfv) should be measured by host
+; VMM. This is indicated by the Attributes field.
+;
+; So put all these information together, when a new guest is being created,
+; the initial TD-private pages for BFV is added by TDH.MEM.PAGE.ADD function,
+; and Bfv is loaded at the guest physical address indicated by MemoryAddress.
+; Since the Attributes is TDX_METADATA_ATTRIBUTES_EXTENDMR, Bfv is measured by
+; host VMM.
+;
+; Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+;------------------------------------------------------------------------------
+
+BITS 64
+
+%define TDX_METADATA_SECTION_TYPE_BFV 0
+%define TDX_METADATA_SECTION_TYPE_CFV 1
+%define TDX_METADATA_SECTION_TYPE_TD_HOB 2
+%define TDX_METADATA_SECTION_TYPE_TEMP_MEM 3
+%define TDX_METADATA_VERSION 1
+%define TDX_METADATA_ATTRIBUTES_EXTENDMR 0x00000001
+
+ALIGN 16
+TIMES (15 - ((TdxGuidedStructureEnd - TdxGuidedStructureStart + 15) % 16)) DB 0
+
+TdxGuidedStructureStart:
+
+;
+; TDVF meta data
+;
+TdxMetadataGuid:
+ DB 0xf3, 0xf9, 0xea, 0xe9, 0x8e, 0x16, 0xd5, 0x44
+ DB 0xa8, 0xeb, 0x7f, 0x4d, 0x87, 0x38, 0xf6, 0xae
+
+_Descriptor:
+ DB 'T','D','V','F' ; Signature
+ DD TdxGuidedStructureEnd - _Descriptor ; Length
+ DD TDX_METADATA_VERSION ; Version
+ DD (TdxGuidedStructureEnd - _Descriptor - 16)/32 ; Number of sections
+
+_Bfv:
+ DD TDX_BFV_RAW_DATA_OFFSET
+ DD TDX_BFV_RAW_DATA_SIZE
+ DQ TDX_BFV_MEMORY_BASE
+ DQ TDX_BFV_MEMORY_SIZE
+ DD TDX_METADATA_SECTION_TYPE_BFV
+ DD TDX_METADATA_ATTRIBUTES_EXTENDMR
+
+_Cfv:
+ DD TDX_CFV_RAW_DATA_OFFSET
+ DD TDX_CFV_RAW_DATA_SIZE
+ DQ TDX_CFV_MEMORY_BASE
+ DQ TDX_CFV_MEMORY_SIZE
+ DD TDX_METADATA_SECTION_TYPE_CFV
+ DD 0
+
+_TdxHeapStack:
+ DD 0
+ DD 0
+ DQ TDX_HEAP_STACK_BASE
+ DQ TDX_HEAP_STACK_SIZE
+ DD TDX_METADATA_SECTION_TYPE_TEMP_MEM
+ DD 0
+
+_TdxInitMem:
+ DD 0
+ DD 0
+ DQ TDX_INIT_MEMORY_BASE
+ DQ TDX_INIT_MEMORY_SIZE
+ DD TDX_METADATA_SECTION_TYPE_TEMP_MEM
+ DD 0
+
+_TdHob:
+ DD 0
+ DD 0
+ DQ TDX_HOB_MEMORY_BASE
+ DQ TDX_HOB_MEMORY_SIZE
+ DD TDX_METADATA_SECTION_TYPE_TD_HOB
+ DD 0
+
+_OvmfPageTable:
+ DD 0
+ DD 0
+ DQ OVMF_PAGE_TABLE_BASE
+ DQ OVMF_PAGE_TABLE_SIZE
+ DD TDX_METADATA_SECTION_TYPE_TEMP_MEM
+ DD 0
+
+TdxGuidedStructureEnd:
+ALIGN 16
--
2.29.2.windows.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V10 4/4] OvmfPkg: Enable TDX in ResetVector
2021-10-21 0:17 [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Min Xu
` (2 preceding siblings ...)
2021-10-21 0:17 ` [PATCH V10 3/4] OvmfPkg: Add IntelTdxMetadata.asm Min Xu
@ 2021-10-21 0:17 ` Min Xu
2021-10-21 9:32 ` Gerd Hoffmann
2021-10-21 0:45 ` [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Yao, Jiewen
2021-10-24 2:11 ` Yao, Jiewen
5 siblings, 1 reply; 9+ messages in thread
From: Min Xu @ 2021-10-21 0:17 UTC (permalink / raw)
To: devel
Cc: Min Xu, Ard Biesheuvel, Jordan Justen, Gerd Hoffmann,
Brijesh Singh, Erdem Aktas, James Bottomley, Jiewen Yao,
Tom Lendacky
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
Note: Intel TDX is only available on X64, so the Tdx related changes are
in X64 path. In IA32 path, there may be null stub to make the build
success.
This patch includes below major changes.
1. Ia32/IntelTdx.asm
IntelTdx.asm includes below routines used in ResetVector
- IsTdx
Check if the running system is Tdx guest.
- InitTdxWorkarea
It initialize the TDX_WORK_AREA. Because it is called by both BSP and
APs and to avoid the race condition, only BSP can initialize the
WORK_AREA. AP will wait until the field of TDX_WORK_AREA_PGTBL_READY
is set.
- ReloadFlat32
After reset all CPUs in TDX are initialized to 32-bit protected mode.
But GDT register is not set. So this routine loads the GDT then jump
to Flat 32 protected mode again.
- InitTdx
This routine wrap above 3 routines together to do Tdx initialization
in ResetVector phase.
- IsTdxEnabled
It is a OneTimeCall to probe if TDX is enabled by checking the
CC_WORK_AREA.
- CheckTdxFeaturesBeforeBuildPagetables
This routine is called to check if it is Non-TDX guest, TDX-Bsp or
TDX-APs. Because in TDX guest all the initialization is done by BSP
(including the page tables). APs should not build the tables.
- TdxPostBuildPageTables
It is called after Page Tables are built by BSP.
byte[TDX_WORK_AREA_PGTBL_READY] is set by BSP to indicate APs can
leave spin and go.
2. Ia32/PageTables64.asm
As described above only the TDX BSP build the page tables. So
PageTables64.asm is updated to make sure only TDX BSP build the
PageTables. TDX APs will skip the page table building and set Cr3
directly.
3. Ia16/ResetVectorVtf0.asm
In Tdx all CPUs "reset" to run on 32-bit protected mode with flat
descriptor (paging disabled). But in Non-Td guest the initial state of
CPUs is 16-bit real mode. To resolve this conflict, BITS 16/32 is used
in the ResetVectorVtf0.asm. It checks the 32-bit protected mode or 16-bit
real mode, then jump to the corresponding entry point.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
---
OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 20 ++
OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm | 11 +
OvmfPkg/ResetVector/Ia32/IntelTdx.asm | 222 +++++++++++++++++++
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 18 ++
OvmfPkg/ResetVector/Main.asm | 14 ++
OvmfPkg/ResetVector/ResetVector.nasmb | 1 +
6 files changed, 286 insertions(+)
create mode 100644 OvmfPkg/ResetVector/Ia32/IntelTdx.asm
diff --git a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
index 7be43fb44a69..dee2e3f9de31 100644
--- a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
+++ b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
@@ -177,10 +177,30 @@ resetVector:
;
; This is where the processor will begin execution
;
+; In IA32 we follow the standard reset vector flow. While in X64, Td guest
+; may be supported. Td guest requires the startup mode to be 32-bit
+; protected mode but the legacy VM startup mode is 16-bit real mode.
+; To make NASM generate such shared entry code that behaves correctly in
+; both 16-bit and 32-bit mode, more BITS directives are added.
+;
+%ifdef ARCH_IA32
nop
nop
jmp EarlyBspInitReal16
+%else
+
+ mov eax, cr0
+ test al, 1
+ jz .Real
+BITS 32
+ jmp Main32
+BITS 16
+.Real:
+ jmp EarlyBspInitReal16
+
+%endif
+
ALIGN 16
fourGigabytes:
diff --git a/OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm b/OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm
index c6d0d898bcd1..eb3546668ef8 100644
--- a/OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm
+++ b/OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm
@@ -21,6 +21,17 @@ Transition32FlatTo64Flat:
bts eax, 5 ; enable PAE
mov cr4, eax
+ ;
+ ; In TDX LME has already been set. So we're done and jump to enable
+ ; paging directly if Tdx is enabled.
+ ; EBX is cleared because in the later it will be used to check if
+ ; the second step of the SEV-ES mitigation is to be performed.
+ ;
+ xor ebx, ebx
+ OneTimeCall IsTdxEnabled
+ test eax, eax
+ jnz EnablePaging
+
mov ecx, 0xc0000080
rdmsr
bts eax, 8 ; set LME
diff --git a/OvmfPkg/ResetVector/Ia32/IntelTdx.asm b/OvmfPkg/ResetVector/Ia32/IntelTdx.asm
new file mode 100644
index 000000000000..06794baef81d
--- /dev/null
+++ b/OvmfPkg/ResetVector/Ia32/IntelTdx.asm
@@ -0,0 +1,222 @@
+;------------------------------------------------------------------------------
+; @file
+; Intel TDX routines
+;
+; Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+;------------------------------------------------------------------------------
+
+%define VM_GUEST_TDX 2
+
+BITS 32
+
+;
+; Check if it is Intel Tdx
+;
+; Modified: EAX, EBX, ECX, EDX
+;
+; If it is Intel Tdx, EAX is 1
+; If it is not Intel Tdx, EAX is 0
+;
+IsTdx:
+ ;
+ ; CPUID (0)
+ ;
+ mov eax, 0
+ cpuid
+ cmp ebx, 0x756e6547 ; "Genu"
+ jne IsNotTdx
+ cmp edx, 0x49656e69 ; "ineI"
+ jne IsNotTdx
+ cmp ecx, 0x6c65746e ; "ntel"
+ jne IsNotTdx
+
+ ;
+ ; CPUID (1)
+ ;
+ mov eax, 1
+ cpuid
+ test ecx, 0x80000000
+ jz IsNotTdx
+
+ ;
+ ; CPUID[0].EAX >= 0x21?
+ ;
+ mov eax, 0
+ cpuid
+ cmp eax, 0x21
+ jl IsNotTdx
+
+ ;
+ ; CPUID (0x21,0)
+ ;
+ mov eax, 0x21
+ mov ecx, 0
+ cpuid
+
+ cmp ebx, 0x65746E49 ; "Inte"
+ jne IsNotTdx
+ cmp edx, 0x5844546C ; "lTDX"
+ jne IsNotTdx
+ cmp ecx, 0x20202020 ; " "
+ jne IsNotTdx
+
+ mov eax, 1
+ jmp ExitIsTdx
+
+IsNotTdx:
+ xor eax, eax
+
+ExitIsTdx:
+
+ OneTimeCallRet IsTdx
+
+;
+; Initialize work area if it is Tdx guest. Detailed definition is in
+; OvmfPkg/Include/WorkArea.h.
+; BSP and APs all go here. Only BSP initialize this work area.
+;
+; Param[in] EBX[5:0] CPU Supported GPAW (48 or 52)
+; Param[in] ESI[31:0] vCPU ID (BSP is 0, others are AP)
+;
+; Modified: EBX
+;
+InitTdxWorkarea:
+
+ ;
+ ; First check if it is Tdx
+ ;
+ OneTimeCall IsTdx
+
+ test eax, eax
+ jz ExitInitTdxWorkarea
+
+ cmp esi, 0
+ je TdxBspEntry
+
+ ;
+ ; In Td guest, BSP/AP shares the same entry point
+ ; BSP builds up the page table, while APs shouldn't do the same task.
+ ; Instead, APs just leverage the page table which is built by BSP.
+ ; APs will wait until the page table is ready.
+ ;
+TdxApWait:
+ cmp byte[TDX_WORK_AREA_PGTBL_READY], 0
+ je TdxApWait
+ jmp ExitInitTdxWorkarea
+
+TdxBspEntry:
+ ;
+ ; Set Type of WORK_AREA_GUEST_TYPE so that the following code can use
+ ; these information.
+ ;
+ mov byte[WORK_AREA_GUEST_TYPE], VM_GUEST_TDX
+
+ ;
+ ; EBX[5:0] CPU supported GPA width
+ ;
+ and ebx, 0x3f
+ mov DWORD[TDX_WORK_AREA_GPAW], ebx
+
+ExitInitTdxWorkarea:
+ OneTimeCallRet InitTdxWorkarea
+
+;
+; Load the GDT and set the CS/DS/ES/FS/GS/SS.
+;
+; Modified: EAX, DS, ES, FS, GS, SS, CS
+;
+ReloadFlat32:
+
+ cli
+ mov eax, ADDR_OF(gdtr)
+ lgdt [eax]
+
+ jmp LINEAR_CODE_SEL:dword ADDR_OF(jumpToFlat32BitAndLandHere)
+
+jumpToFlat32BitAndLandHere:
+
+ debugShowPostCode POSTCODE_32BIT_MODE
+
+ mov ax, LINEAR_SEL
+ mov ds, ax
+ mov es, ax
+ mov fs, ax
+ mov gs, ax
+ mov ss, ax
+
+ OneTimeCallRet ReloadFlat32
+
+;
+; Tdx initialization after entering into ResetVector
+;
+; Modified: EAX, EBX, ECX, EDX, EBP, EDI, ESP
+;
+InitTdx:
+ ;
+ ; First load the GDT and jump to Flat32 mode
+ ;
+ OneTimeCall ReloadFlat32
+
+ ;
+ ; Initialization of Tdx work area
+ ;
+ OneTimeCall InitTdxWorkarea
+
+ OneTimeCallRet InitTdx
+
+;
+; Check TDX features, TDX or TDX-BSP or TDX-APs?
+;
+; By design TDX BSP is reponsible for initializing the PageTables.
+; After PageTables are ready, byte[TDX_WORK_AREA_PGTBL_READY] is set to 1.
+; APs will spin when byte[TDX_WORK_AREA_PGTBL_READY] is 0 until it is set to 1.
+;
+; When this routine is run on TDX BSP, byte[TDX_WORK_AREA_PGTBL_READY] should be 0.
+; When this routine is run on TDX APs, byte[TDX_WORK_AREA_PGTBL_READY] should be 1.
+;
+;
+; Modified: EAX, EDX
+;
+; 0-NonTdx, 1-TdxBsp, 2-TdxAps
+;
+CheckTdxFeaturesBeforeBuildPagetables:
+ xor eax, eax
+ cmp byte[WORK_AREA_GUEST_TYPE], VM_GUEST_TDX
+ jne NotTdx
+
+ xor edx, edx
+ mov al, byte[TDX_WORK_AREA_PGTBL_READY]
+ inc eax
+
+NotTdx:
+ OneTimeCallRet CheckTdxFeaturesBeforeBuildPagetables
+
+;
+; Set byte[TDX_WORK_AREA_PGTBL_READY] to 1
+;
+TdxPostBuildPageTables:
+ cmp byte[WORK_AREA_GUEST_TYPE], VM_GUEST_TDX
+ jne ExitTdxPostBuildPageTables
+ mov byte[TDX_WORK_AREA_PGTBL_READY], 1
+
+ExitTdxPostBuildPageTables:
+ OneTimeCallRet TdxPostBuildPageTables
+
+;
+; Check if TDX is enabled
+;
+; Modified: EAX
+;
+; If TDX is enabled then EAX will be 1
+; If TDX is disabled then EAX will be 0.
+;
+IsTdxEnabled:
+ xor eax, eax
+ cmp byte[WORK_AREA_GUEST_TYPE], VM_GUEST_TDX
+ jne TdxNotEnabled
+ mov eax, 1
+
+TdxNotEnabled:
+ OneTimeCallRet IsTdxEnabled
diff --git a/OvmfPkg/ResetVector/Ia32/PageTables64.asm b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
index 02528221e560..317cad430f29 100644
--- a/OvmfPkg/ResetVector/Ia32/PageTables64.asm
+++ b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
@@ -37,10 +37,23 @@ BITS 32
PAGE_READ_WRITE + \
PAGE_PRESENT)
+%define TDX_BSP 1
+%define TDX_AP 2
+
;
; Modified: EAX, EBX, ECX, EDX
;
SetCr3ForPageTables64:
+ ; Check the TDX features.
+ ; If it is TDX APs, then jump to SetCr3 directly.
+ ; In TD guest the initialization is done by BSP, including building
+ ; the page tables. APs will spin on until byte[TDX_WORK_AREA_PGTBL_READY]
+ ; is set.
+ OneTimeCall CheckTdxFeaturesBeforeBuildPagetables
+ cmp eax, TDX_BSP
+ je ClearOvmfPageTables
+ cmp eax, TDX_AP
+ je SetCr3
; Check whether the SEV is active and populate the SevEsWorkArea
OneTimeCall CheckSevFeatures
@@ -50,6 +63,7 @@ SetCr3ForPageTables64:
; the page table build below.
OneTimeCall GetSevCBitMaskAbove31
+ClearOvmfPageTables:
;
; For OVMF, build some initial page tables at
; PcdOvmfSecPageTablesBase - (PcdOvmfSecPageTablesBase + 0x6000).
@@ -101,6 +115,10 @@ pageTableEntriesLoop:
; Clear the C-bit from the GHCB page if the SEV-ES is enabled.
OneTimeCall SevClearPageEncMaskForGhcbPage
+ ; TDX will do some PostBuildPages task, such as setting
+ ; byte[TDX_WORK_AREA_PGTBL_READY].
+ OneTimeCall TdxPostBuildPageTables
+
SetCr3:
;
; Set CR3 now that the paging structures are available
diff --git a/OvmfPkg/ResetVector/Main.asm b/OvmfPkg/ResetVector/Main.asm
index bbfeac1c88bc..5cfc0b5c72b1 100644
--- a/OvmfPkg/ResetVector/Main.asm
+++ b/OvmfPkg/ResetVector/Main.asm
@@ -40,6 +40,20 @@ BITS 32
; work area when detected.
mov byte[WORK_AREA_GUEST_TYPE], 0
+%ifdef ARCH_X64
+
+ jmp SearchBfv
+
+;
+; Entry point of Main32
+;
+Main32:
+ OneTimeCall InitTdx
+
+SearchBfv:
+
+%endif
+
;
; Search for the Boot Firmware Volume (BFV)
;
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb b/OvmfPkg/ResetVector/ResetVector.nasmb
index eb9733e40256..87effedb9c60 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -108,6 +108,7 @@
%include "Ia32/Flat32ToFlat64.asm"
%include "Ia32/AmdSev.asm"
%include "Ia32/PageTables64.asm"
+%include "Ia32/IntelTdx.asm"
%endif
%include "Ia16/Real16ToFlat32.asm"
--
2.29.2.windows.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector
2021-10-21 0:17 [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Min Xu
` (3 preceding siblings ...)
2021-10-21 0:17 ` [PATCH V10 4/4] OvmfPkg: Enable TDX in ResetVector Min Xu
@ 2021-10-21 0:45 ` Yao, Jiewen
2021-10-24 2:11 ` Yao, Jiewen
5 siblings, 0 replies; 9+ messages in thread
From: Yao, Jiewen @ 2021-10-21 0:45 UTC (permalink / raw)
To: Xu, Min M, devel@edk2.groups.io
Cc: Ard Biesheuvel, Gerd Hoffmann, Justen, Jordan L, Brijesh Singh,
Erdem Aktas, James Bottomley, Tom Lendacky
Thank you Min
Series: Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
> -----Original Message-----
> From: Xu, Min M <min.m.xu@intel.com>
> Sent: Thursday, October 21, 2021 8:18 AM
> To: devel@edk2.groups.io
> Cc: Xu, Min M <min.m.xu@intel.com>; Ard Biesheuvel
> <ardb+tianocore@kernel.org>; Gerd Hoffmann <kraxel@redhat.com>; Justen,
> Jordan L <jordan.l.justen@intel.com>; Brijesh Singh <brijesh.singh@amd.com>;
> Erdem Aktas <erdemaktas@google.com>; James Bottomley
> <jejb@linux.ibm.com>; Yao, Jiewen <jiewen.yao@intel.com>; Tom Lendacky
> <thomas.lendacky@amd.com>
> Subject: [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
>
> Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
> that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
> Encryption (MKTME) with a new kind of virutal machines guest called a
> Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
> confidentiality of TD memory contents and the TD's CPU state from other
> software, including the hosting Virtual-Machine Monitor (VMM), unless
> explicitly shared by the TD itself.
>
> The patch-sets to support Intel TDX in OvmfPkg is split into several
> waves. This is wave-1 which adds Intel TDX support in OvmfPkg/ResetVector.
> Note: TDX only works in X64.
>
> Patch #1: Ovmf uses its own Main.asm to reduce the complexity of Main.asm
> in UefiCpuPkg. This Main.asm is an unmodified copy from
> UefiCpuPkg/ReseteVector/Vtf0 (so no functional change) and the actual
> changes for tdx come as incremental patches.
>
> Patch #2: WORK_AREA_GUEST_TYPE is cleared in Main.asm instead of in
> WORK_AREA_GUEST_TYPE.
>
> Patch #3: Introduce IntelTdxMetadata.asm which describes the information
> about the image for VMM use.
>
> Patch #4: Enable TDX in OvmfPkg/ResetVector for ARCH_X64.
>
> [TDX]: https://software.intel.com/content/dam/develop/external/us/en/
> documents/tdx-whitepaper-final9-17.pdf
>
> [TDVF]: https://software.intel.com/content/dam/develop/external/us/en/
> documents/tdx-virtual-firmware-design-guide-rev-1.pdf
>
> Code is at https://github.com/mxu9/edk2/tree/tdvf_wave1.v10
>
> v10 changes:
> - Clear the OVMF_WORK_AREA in both ARCH_IA32 and ARCH_X64.
> - Update the ReloadFlat32 based on the review comments.
> - Other minor changes and update some comments.
>
> v9 changes:
> - Introduce IntelTdxMetadata.asm in a separate commit.
> - Use absolute offset for the start of TdxMetadata so that VMM can
> easily reach to the start of the metadata.
>
> v8 changes:
> - Create a separate commit for Main.asm.
> - Create a separate commit for the clearance of WORK_AREA_GUEST_TYPE.
> - Fix some inaccurate comments.
>
> v7 changes:
> - Refine the offset of TdxMetadata and remove the definition of
> PcdOvmfImageSizeInKB
> - Use MOV CR* instead of smsw in ResetVector
> - Remove the new field (SubType) in
> CONFIDENTIAL_COMPUTING_WORK_AREA_HEADER.
>
> v6 changes:
> - Remove the 5-level paging support. 5-level paging enabling is *NOT*
> super critical for TDX enabling at this moment. It will be enabled
> later in a separate patch.
> - Add a new field (SubType) in
> CONFIDENTIAL_COMPUTING_WORK_AREA_HEADER
> to record the VM Guest SubType.
> - In Main16 entry point, after TransitionFromReal16To32BitFlat,
> WORK_AREA_GUEST_TYPE is cleared to 0. WORK_AREA_GUEST_TYPE was
> previously cleared in SetCr3ForPageTables64 (see commit ab77b60).
> This doesn't work after TDX is introduced in Ovmf. It is because all
> TDX CPUs (BSP and APs) start to run from 0xfffffff0. In previous code
> WORK_AREA_GUEST_TYPE will be cleared multi-times in TDX guest. So for
> SEV and Legacy guest it is moved to Main16 entry point (after
> TransitionFromReal16To32BitFlat). For TDX guest WORK_AREA_GUEST_TYPE
> is cleared and set in InitTdxWorkarea.
> - Make the return result of IsTdx be consistent with IsTdxEnabled.
> - Fix some typo in the code comments.
>
> v5 changes:
> - Remove the changes of OVMF_WORK_AREA because Commit ab77b60 covers
> those changes.
> - Refine the TDX related changes in PageTables64.asm and
> Flat32ToFlat64.asm.
> - Add CheckTdxFeaturesBeforeBuildPagetables to check Non-Tdx, Tdx-BSP or
> Tdx-APs. This routine is called before building page tables.
>
> v4 changes:
> - Refine the PageTables64.asm and Flat32ToFlat64.asm to enable TDX.
> - Refine SEV_ES_WORK_AREA so that SEV/TDX/Legach guest all can use this
> memory region. https://edk2.groups.io/g/devel/message/78345 is the
> discussion.
> - AmdSev.asm is removed because Brijesh Singh has done it in
> https://edk2.groups.io/g/devel/message/78241.
>
> v3 changes:
> - Refine PageTables64.asm and Flat32ToFlat64.asm based on the review
> comments in [ReviewComment-1] and [ReviewComment-2].
> - SEV codes are in AmdSev.asm
> - TDX codes are in IntelTdx.asm
> - Main.asm is created in OvmfPkg/ResetVector. The one in
> UefiCpuPkg/ResetVector/Vtf0 is not used.
> - Init32.asm/ReloadFlat32.asm in UefiCpuPkg/ResetVector/Vtf0/Ia32 are
> deleted. They're moved to OvmfPkg/ResetVector/Ia32.
> - InitTdx.asm is renamed to InteTdx.asm
>
> v2 changes:
> - Move InitTdx.asm and ReloadFlat32.asm from UefiCpuPkg/ResetVector/Vtf0
> to OvmfPkg/ResetVector. Init32.asm is created which is a null stub of
> 32-bit initialization. In Main32 just simply call Init32. It makes
> the Main.asm in UefiCpuPkg/ResetVector clean and clear.
> - Init32.asm/InitTdx.asm/ReloadFlat32.asm are created under
> OvmfPkg/ResetVector/Ia32.
> - Update some descriptions of the patch-sets.
> - Update the REF link in cover letter.
> - Add Ard Biesheuvel in Cc list.
>
> v1: https://edk2.groups.io/g/devel/message/77675
>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Brijesh Singh <brijesh.singh@amd.com>
> Cc: Erdem Aktas <erdemaktas@google.com>
> Cc: James Bottomley <jejb@linux.ibm.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Tom Lendacky <thomas.lendacky@amd.com>
> Signed-off-by: Min Xu <min.m.xu@intel.com>
>
> Min Xu (4):
> OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector
> OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm
> OvmfPkg: Add IntelTdxMetadata.asm
> OvmfPkg: Enable TDX in ResetVector
>
> OvmfPkg/OvmfPkg.dec | 9 +
> OvmfPkg/OvmfPkgDefines.fdf.inc | 9 +
> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 39 ++++
> OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm | 11 +
> OvmfPkg/ResetVector/Ia32/IntelTdx.asm | 222 +++++++++++++++++++
> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 22 +-
> OvmfPkg/ResetVector/Main.asm | 121 ++++++++++
> OvmfPkg/ResetVector/ResetVector.inf | 9 +
> OvmfPkg/ResetVector/ResetVector.nasmb | 28 +++
> OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm | 115 ++++++++++
> 10 files changed, 581 insertions(+), 4 deletions(-)
> create mode 100644 OvmfPkg/ResetVector/Ia32/IntelTdx.asm
> create mode 100644 OvmfPkg/ResetVector/Main.asm
> create mode 100644 OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm
>
> --
> 2.29.2.windows.2
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V10 2/4] OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm
2021-10-21 0:17 ` [PATCH V10 2/4] OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm Min Xu
@ 2021-10-21 9:28 ` Gerd Hoffmann
0 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2021-10-21 9:28 UTC (permalink / raw)
To: Min Xu
Cc: devel, Ard Biesheuvel, Jordan Justen, Brijesh Singh, Erdem Aktas,
James Bottomley, Jiewen Yao, Tom Lendacky
On Thu, Oct 21, 2021 at 08:17:32AM +0800, Min Xu wrote:
> RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
>
> Previously WORK_AREA_GUEST_TYPE was cleared in SetCr3ForPageTables64.
> This is workable for Legacy guest and SEV guest. But it doesn't work
> after Intel TDX is introduced. It is because all TDX CPUs (BSP and APs)
> start to run from 0xfffffff0, thus WORK_AREA_GUEST_TYPE will be cleared
> multi-times if it is TDX guest. So the clearance of WORK_AREA_GUEST_TYPE
> is moved to Main16 entry point in Main.asm.
> Note: WORK_AREA_GUEST_TYPE is only defined for ARCH_X64.
>
> For Intel TDX, its corresponding entry point is Main32 (which will be
> introduced in next commit in this patch-set). WORK_AREA_GUEST_TYPE will
> be cleared there.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V10 4/4] OvmfPkg: Enable TDX in ResetVector
2021-10-21 0:17 ` [PATCH V10 4/4] OvmfPkg: Enable TDX in ResetVector Min Xu
@ 2021-10-21 9:32 ` Gerd Hoffmann
0 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2021-10-21 9:32 UTC (permalink / raw)
To: Min Xu
Cc: devel, Ard Biesheuvel, Jordan Justen, Brijesh Singh, Erdem Aktas,
James Bottomley, Jiewen Yao, Tom Lendacky
On Thu, Oct 21, 2021 at 08:17:34AM +0800, Min Xu wrote:
> RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
>
> Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
> that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
> Encryption (MKTME) with a new kind of virutal machines guest called a
> Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
> confidentiality of TD memory contents and the TD's CPU state from other
> software, including the hosting Virtual-Machine Monitor (VMM), unless
> explicitly shared by the TD itself.
>
> Note: Intel TDX is only available on X64, so the Tdx related changes are
> in X64 path. In IA32 path, there may be null stub to make the build
> success.
>
> This patch includes below major changes.
>
> 1. Ia32/IntelTdx.asm
> IntelTdx.asm includes below routines used in ResetVector
> - IsTdx
> Check if the running system is Tdx guest.
>
> - InitTdxWorkarea
> It initialize the TDX_WORK_AREA. Because it is called by both BSP and
> APs and to avoid the race condition, only BSP can initialize the
> WORK_AREA. AP will wait until the field of TDX_WORK_AREA_PGTBL_READY
> is set.
>
> - ReloadFlat32
> After reset all CPUs in TDX are initialized to 32-bit protected mode.
> But GDT register is not set. So this routine loads the GDT then jump
> to Flat 32 protected mode again.
>
> - InitTdx
> This routine wrap above 3 routines together to do Tdx initialization
> in ResetVector phase.
>
> - IsTdxEnabled
> It is a OneTimeCall to probe if TDX is enabled by checking the
> CC_WORK_AREA.
>
> - CheckTdxFeaturesBeforeBuildPagetables
> This routine is called to check if it is Non-TDX guest, TDX-Bsp or
> TDX-APs. Because in TDX guest all the initialization is done by BSP
> (including the page tables). APs should not build the tables.
>
> - TdxPostBuildPageTables
> It is called after Page Tables are built by BSP.
> byte[TDX_WORK_AREA_PGTBL_READY] is set by BSP to indicate APs can
> leave spin and go.
>
> 2. Ia32/PageTables64.asm
> As described above only the TDX BSP build the page tables. So
> PageTables64.asm is updated to make sure only TDX BSP build the
> PageTables. TDX APs will skip the page table building and set Cr3
> directly.
>
> 3. Ia16/ResetVectorVtf0.asm
> In Tdx all CPUs "reset" to run on 32-bit protected mode with flat
> descriptor (paging disabled). But in Non-Td guest the initial state of
> CPUs is 16-bit real mode. To resolve this conflict, BITS 16/32 is used
> in the ResetVectorVtf0.asm. It checks the 32-bit protected mode or 16-bit
> real mode, then jump to the corresponding entry point.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector
2021-10-21 0:17 [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Min Xu
` (4 preceding siblings ...)
2021-10-21 0:45 ` [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Yao, Jiewen
@ 2021-10-24 2:11 ` Yao, Jiewen
5 siblings, 0 replies; 9+ messages in thread
From: Yao, Jiewen @ 2021-10-24 2:11 UTC (permalink / raw)
To: Xu, Min M, devel@edk2.groups.io
Cc: Ard Biesheuvel, Gerd Hoffmann, Justen, Jordan L, Brijesh Singh,
Erdem Aktas, James Bottomley, Tom Lendacky
Merged https://github.com/tianocore/edk2/pull/2142
f079e9b450b3896bb00eb7a9fed3a6ec7ed3cd04.. 8b76f235340922a6d293bff05978ba57d3b498e1
> -----Original Message-----
> From: Xu, Min M <min.m.xu@intel.com>
> Sent: Thursday, October 21, 2021 8:18 AM
> To: devel@edk2.groups.io
> Cc: Xu, Min M <min.m.xu@intel.com>; Ard Biesheuvel
> <ardb+tianocore@kernel.org>; Gerd Hoffmann <kraxel@redhat.com>; Justen,
> Jordan L <jordan.l.justen@intel.com>; Brijesh Singh <brijesh.singh@amd.com>;
> Erdem Aktas <erdemaktas@google.com>; James Bottomley
> <jejb@linux.ibm.com>; Yao, Jiewen <jiewen.yao@intel.com>; Tom Lendacky
> <thomas.lendacky@amd.com>
> Subject: [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
>
> Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
> that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
> Encryption (MKTME) with a new kind of virutal machines guest called a
> Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
> confidentiality of TD memory contents and the TD's CPU state from other
> software, including the hosting Virtual-Machine Monitor (VMM), unless
> explicitly shared by the TD itself.
>
> The patch-sets to support Intel TDX in OvmfPkg is split into several
> waves. This is wave-1 which adds Intel TDX support in OvmfPkg/ResetVector.
> Note: TDX only works in X64.
>
> Patch #1: Ovmf uses its own Main.asm to reduce the complexity of Main.asm
> in UefiCpuPkg. This Main.asm is an unmodified copy from
> UefiCpuPkg/ReseteVector/Vtf0 (so no functional change) and the actual
> changes for tdx come as incremental patches.
>
> Patch #2: WORK_AREA_GUEST_TYPE is cleared in Main.asm instead of in
> WORK_AREA_GUEST_TYPE.
>
> Patch #3: Introduce IntelTdxMetadata.asm which describes the information
> about the image for VMM use.
>
> Patch #4: Enable TDX in OvmfPkg/ResetVector for ARCH_X64.
>
> [TDX]: https://software.intel.com/content/dam/develop/external/us/en/
> documents/tdx-whitepaper-final9-17.pdf
>
> [TDVF]: https://software.intel.com/content/dam/develop/external/us/en/
> documents/tdx-virtual-firmware-design-guide-rev-1.pdf
>
> Code is at https://github.com/mxu9/edk2/tree/tdvf_wave1.v10
>
> v10 changes:
> - Clear the OVMF_WORK_AREA in both ARCH_IA32 and ARCH_X64.
> - Update the ReloadFlat32 based on the review comments.
> - Other minor changes and update some comments.
>
> v9 changes:
> - Introduce IntelTdxMetadata.asm in a separate commit.
> - Use absolute offset for the start of TdxMetadata so that VMM can
> easily reach to the start of the metadata.
>
> v8 changes:
> - Create a separate commit for Main.asm.
> - Create a separate commit for the clearance of WORK_AREA_GUEST_TYPE.
> - Fix some inaccurate comments.
>
> v7 changes:
> - Refine the offset of TdxMetadata and remove the definition of
> PcdOvmfImageSizeInKB
> - Use MOV CR* instead of smsw in ResetVector
> - Remove the new field (SubType) in
> CONFIDENTIAL_COMPUTING_WORK_AREA_HEADER.
>
> v6 changes:
> - Remove the 5-level paging support. 5-level paging enabling is *NOT*
> super critical for TDX enabling at this moment. It will be enabled
> later in a separate patch.
> - Add a new field (SubType) in
> CONFIDENTIAL_COMPUTING_WORK_AREA_HEADER
> to record the VM Guest SubType.
> - In Main16 entry point, after TransitionFromReal16To32BitFlat,
> WORK_AREA_GUEST_TYPE is cleared to 0. WORK_AREA_GUEST_TYPE was
> previously cleared in SetCr3ForPageTables64 (see commit ab77b60).
> This doesn't work after TDX is introduced in Ovmf. It is because all
> TDX CPUs (BSP and APs) start to run from 0xfffffff0. In previous code
> WORK_AREA_GUEST_TYPE will be cleared multi-times in TDX guest. So for
> SEV and Legacy guest it is moved to Main16 entry point (after
> TransitionFromReal16To32BitFlat). For TDX guest WORK_AREA_GUEST_TYPE
> is cleared and set in InitTdxWorkarea.
> - Make the return result of IsTdx be consistent with IsTdxEnabled.
> - Fix some typo in the code comments.
>
> v5 changes:
> - Remove the changes of OVMF_WORK_AREA because Commit ab77b60 covers
> those changes.
> - Refine the TDX related changes in PageTables64.asm and
> Flat32ToFlat64.asm.
> - Add CheckTdxFeaturesBeforeBuildPagetables to check Non-Tdx, Tdx-BSP or
> Tdx-APs. This routine is called before building page tables.
>
> v4 changes:
> - Refine the PageTables64.asm and Flat32ToFlat64.asm to enable TDX.
> - Refine SEV_ES_WORK_AREA so that SEV/TDX/Legach guest all can use this
> memory region. https://edk2.groups.io/g/devel/message/78345 is the
> discussion.
> - AmdSev.asm is removed because Brijesh Singh has done it in
> https://edk2.groups.io/g/devel/message/78241.
>
> v3 changes:
> - Refine PageTables64.asm and Flat32ToFlat64.asm based on the review
> comments in [ReviewComment-1] and [ReviewComment-2].
> - SEV codes are in AmdSev.asm
> - TDX codes are in IntelTdx.asm
> - Main.asm is created in OvmfPkg/ResetVector. The one in
> UefiCpuPkg/ResetVector/Vtf0 is not used.
> - Init32.asm/ReloadFlat32.asm in UefiCpuPkg/ResetVector/Vtf0/Ia32 are
> deleted. They're moved to OvmfPkg/ResetVector/Ia32.
> - InitTdx.asm is renamed to InteTdx.asm
>
> v2 changes:
> - Move InitTdx.asm and ReloadFlat32.asm from UefiCpuPkg/ResetVector/Vtf0
> to OvmfPkg/ResetVector. Init32.asm is created which is a null stub of
> 32-bit initialization. In Main32 just simply call Init32. It makes
> the Main.asm in UefiCpuPkg/ResetVector clean and clear.
> - Init32.asm/InitTdx.asm/ReloadFlat32.asm are created under
> OvmfPkg/ResetVector/Ia32.
> - Update some descriptions of the patch-sets.
> - Update the REF link in cover letter.
> - Add Ard Biesheuvel in Cc list.
>
> v1: https://edk2.groups.io/g/devel/message/77675
>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Brijesh Singh <brijesh.singh@amd.com>
> Cc: Erdem Aktas <erdemaktas@google.com>
> Cc: James Bottomley <jejb@linux.ibm.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Tom Lendacky <thomas.lendacky@amd.com>
> Signed-off-by: Min Xu <min.m.xu@intel.com>
>
> Min Xu (4):
> OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector
> OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm
> OvmfPkg: Add IntelTdxMetadata.asm
> OvmfPkg: Enable TDX in ResetVector
>
> OvmfPkg/OvmfPkg.dec | 9 +
> OvmfPkg/OvmfPkgDefines.fdf.inc | 9 +
> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 39 ++++
> OvmfPkg/ResetVector/Ia32/Flat32ToFlat64.asm | 11 +
> OvmfPkg/ResetVector/Ia32/IntelTdx.asm | 222 +++++++++++++++++++
> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 22 +-
> OvmfPkg/ResetVector/Main.asm | 121 ++++++++++
> OvmfPkg/ResetVector/ResetVector.inf | 9 +
> OvmfPkg/ResetVector/ResetVector.nasmb | 28 +++
> OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm | 115 ++++++++++
> 10 files changed, 581 insertions(+), 4 deletions(-)
> create mode 100644 OvmfPkg/ResetVector/Ia32/IntelTdx.asm
> create mode 100644 OvmfPkg/ResetVector/Main.asm
> create mode 100644 OvmfPkg/ResetVector/X64/IntelTdxMetadata.asm
>
> --
> 2.29.2.windows.2
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-10-24 2:11 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-10-21 0:17 [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Min Xu
2021-10-21 0:17 ` [PATCH V10 1/4] OvmfPkg: Copy Main.asm from UefiCpuPkg to OvmfPkg's ResetVector Min Xu
2021-10-21 0:17 ` [PATCH V10 2/4] OvmfPkg: Clear WORK_AREA_GUEST_TYPE in Main.asm Min Xu
2021-10-21 9:28 ` Gerd Hoffmann
2021-10-21 0:17 ` [PATCH V10 3/4] OvmfPkg: Add IntelTdxMetadata.asm Min Xu
2021-10-21 0:17 ` [PATCH V10 4/4] OvmfPkg: Enable TDX in ResetVector Min Xu
2021-10-21 9:32 ` Gerd Hoffmann
2021-10-21 0:45 ` [PATCH V10 0/4] Add Intel TDX support in OvmfPkg/ResetVector Yao, Jiewen
2021-10-24 2:11 ` Yao, Jiewen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox