From: "Gao, Zhichao" <zhichao.gao@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"yeoreum.yun@arm.com" <yeoreum.yun@arm.com>
Cc: "pedro.falcato@gmail.com" <pedro.falcato@gmail.com>,
"sami.mujawar@arm.com" <sami.mujawar@arm.com>,
"pierre.gondois@arm.com" <pierre.gondois@arm.com>,
"nd@arm.com" <nd@arm.com>
Subject: Re: [edk2-devel] [PATCH v2 1/1] ShellPkg: Acpiview/GTDT: Print timer flags information.
Date: Thu, 27 Jul 2023 02:54:43 +0000 [thread overview]
Message-ID: <PH7PR11MB6377D5359D3638AA5AC9F19CF601A@PH7PR11MB6377.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20230717074422.1936009-1-yeoreum.yun@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Thanks,
Zhichao
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of levi.yun
> Sent: Monday, July 17, 2023 3:44 PM
> To: devel@edk2.groups.io
> Cc: yeoreum.yun@arm.com; Gao, Zhichao <zhichao.gao@intel.com>;
> pedro.falcato@gmail.com; sami.mujawar@arm.com;
> pierre.gondois@arm.com; nd@arm.com
> Subject: [edk2-devel] [PATCH v2 1/1] ShellPkg: Acpiview/GTDT: Print timer
> flags information.
>
> Currently, GTDT only prints the value of timer flags in hex.
> This change prints the detail information about Timer flags in GTDT.
>
> before:
> Shell> acpiview -s GTDT
> ...
> Non-Secure EL1 timer FLAGS : 0x2
> Virtual timer GSIV : 0x1B
> Virtual timer FLAGS : 0x2
> ...
>
> after:
> Shell> acpiview -s GTDT
> ...
> Non-Secure EL1 timer FLAGS : 0x2
> Timer Interrupt Mode : Level Trigger(0)
> Timer Interrupt Polarity : Active Low(1)
> Always-on Capability : 0
> Reserved : 0
>
> Virtual timer GSIV : 0x1B
> Virtual timer FLAGS : 0x2
>
> Signed-off-by: levi.yun <yeoreum.yun@arm.com>
> Tested-by: Pierre Gondois <pierre.gondois@arm.com>
> ---
> The changes can be seen at
> https://github.com/LeviYeoReum/edk2/tree/2711_gtdt_flags_v2
>
> Notes:
> v2:
> - Fix typos.
> - Remove unnecessary type casting.
>
> ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser.c
> | 111 +++++++++++++++++---
> 1 file changed, 98 insertions(+), 13 deletions(-)
>
> diff --git
> a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser
> .c
> b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser
> .c
> index
> e62927098a010a0e1dad8361dcfc6559d32dcebf..c95b96a673bf7e6afea7902f57
> 30dcb61a3ce508 100644
> ---
> a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser
> .c
> +++
> b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser
> .c
> @@ -84,33 +84,118 @@ ValidateGtFrameNumber (
> }
> }
>
> +/**
> + This function prints trigger mode information in timer flags.
> +
> + @param [in] Format Print format.
> + @param [in] Ptr Pointer to the start of the field data.
> +**/
> +STATIC
> +VOID
> +EFIAPI
> +PrintTimerInterruptMode (
> + IN CONST CHAR16 *Format OPTIONAL,
> + IN UINT8 *Ptr
> + )
> +{
> + UINT8 TriggerMode;
> +
> + TriggerMode = *Ptr;
> +
> + Print (
> + L"%s(%d)",
> + (TriggerMode ? L"Edge Trigger" : L"Level Trigger"),
> + TriggerMode
> + );
> +}
> +
> +/**
> + This function prints polarity information in timer flags.
> +
> + @param [in] Format Print format.
> + @param [in] Ptr Pointer to the start of the field data.
> +**/
> +STATIC
> +VOID
> +EFIAPI
> +PrintTimerInterruptPolarity (
> + IN CONST CHAR16 *Format OPTIONAL,
> + IN UINT8 *Ptr
> + )
> +{
> + UINT8 Polarity;
> +
> + Polarity = *Ptr;
> +
> + Print (
> + L"%s(%d)",
> + (Polarity ? L"Active Low" : L"Active High"),
> + Polarity
> + );
> +}
> +
> +/**
> + An ACPI_PARSER array describing the Timer Flags Field in GTDT Table.
> +**/
> +STATIC CONST ACPI_PARSER TimerFlagsParser[] = {
> + { L"Timer Interrupt Mode", 1, 0, NULL, PrintTimerInterruptMode,
> NULL, NULL, NULL },
> + { L"Timer Interrupt Polarity", 1, 1, NULL, PrintTimerInterruptPolarity, NULL,
> NULL, NULL },
> + { L"Always-on Capability", 1, 2, L"%d", NULL, NULL, NULL,
> NULL },
> + { L"Reserved", 29, 3, L"%d", NULL, NULL, NULL, NULL },
> +};
> +
> +/**
> + This function parses the Timer Flags.
> +
> + @param [in] Format Print format.
> + @param [in] Ptr Pointer to the start of the Timer flags.
> + **/
> +STATIC
> +VOID
> +EFIAPI
> +DumpTimerFlags (
> + IN CONST CHAR16 *Format OPTIONAL,
> + IN UINT8 *Ptr
> + )
> +{
> + DumpUint32 (L"0x%x\n", Ptr);
> + ParseAcpiBitFields (
> + TRUE,
> + 2,
> + NULL,
> + Ptr,
> + 4,
> + PARSER_PARAMS (TimerFlagsParser)
> + );
> +}
> +
> /**
> An ACPI_PARSER array describing the ACPI GTDT Table.
> **/
> STATIC CONST ACPI_PARSER GtdtParser[] = {
> PARSE_ACPI_HEADER (&AcpiHdrInfo),
> - { L"CntControlBase Physical Address",8, 36, L"0x%lx", NULL, NULL,
> + { L"CntControlBase Physical Address",8, 36, L"0x%lx", NULL, NULL,
> NULL, NULL },
> - { L"Reserved", 4, 44, L"0x%x", NULL, NULL,NULL, NULL },
> - { L"Secure EL1 timer GSIV", 4, 48, L"0x%x", NULL, NULL,NULL,
> NULL },
> - { L"Secure EL1 timer FLAGS", 4, 52, L"0x%x", NULL, NULL,NULL,
> NULL },
> + { L"Reserved", 4, 44, L"0x%x", NULL, NULL,NULL, NULL },
> + { L"Secure EL1 timer GSIV", 4, 48, L"0x%x", NULL, NULL,NULL,
> NULL },
> + { L"Secure EL1 timer FLAGS", 4, 52, NULL, DumpTimerFlags,
> NULL,NULL, NULL },
>
> - { L"Non-Secure EL1 timer GSIV", 4, 56, L"0x%x", NULL, NULL,NULL,
> NULL },
> - { L"Non-Secure EL1 timer FLAGS", 4, 60, L"0x%x", NULL, NULL,NULL,
> NULL },
> + { L"Non-Secure EL1 timer GSIV", 4, 56, L"0x%x", NULL,
> NULL,NULL, NULL },
> + { L"Non-Secure EL1 timer FLAGS", 4, 60, NULL, DumpTimerFlags,
> NULL,NULL, NULL },
>
> - { L"Virtual timer GSIV", 4, 64, L"0x%x", NULL, NULL,NULL, NULL },
> - { L"Virtual timer FLAGS", 4, 68, L"0x%x", NULL, NULL,NULL, NULL },
> + { L"Virtual timer GSIV", 4, 64, L"0x%x", NULL, NULL,NULL,
> NULL },
> + { L"Virtual timer FLAGS", 4, 68, L"0x%x", DumpTimerFlags,
> NULL,NULL, NULL },
>
> - { L"Non-Secure EL2 timer GSIV", 4, 72, L"0x%x", NULL, NULL,NULL,
> NULL },
> - { L"Non-Secure EL2 timer FLAGS", 4, 76, L"0x%x", NULL, NULL,NULL,
> NULL },
> + { L"Non-Secure EL2 timer GSIV", 4, 72, L"0x%x", NULL,
> NULL,NULL, NULL },
> + { L"Non-Secure EL2 timer FLAGS", 4, 76, L"0x%x", DumpTimerFlags,
> NULL,NULL, NULL },
>
> - { L"CntReadBase Physical address", 8, 80, L"0x%lx", NULL, NULL,NULL,
> NULL },
> + { L"CntReadBase Physical address", 8, 80, L"0x%lx", NULL,
> NULL,NULL, NULL },
> { L"Platform Timer Count", 4, 88, L"%d", NULL,
> (VOID **)&GtdtPlatformTimerCount, NULL, NULL },
> { L"Platform Timer Offset", 4, 92, L"0x%x", NULL,
> (VOID **)&GtdtPlatformTimerOffset,NULL, NULL },
> - { L"Virtual EL2 Timer GSIV", 4, 96, L"0x%x", NULL, NULL,NULL, NULL },
> - { L"Virtual EL2 Timer Flags", 4, 100, L"0x%x", NULL, NULL,NULL, NULL }
> + { L"Virtual EL2 Timer GSIV", 4, 96, L"0x%x", NULL, NULL,NULL,
> NULL },
> + { L"Virtual EL2 Timer Flags", 4, 100, L"0x%x", NULL, NULL,NULL,
> NULL }
> };
>
> /**
> --
> Guid("CE165669-3EF3-493F-B85D-6190EE5B9759")
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended recipient,
> please notify the sender immediately and do not disclose the contents to any
> other person, use it for any purpose, or store or copy the information in any
> medium. Thank you.
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#107289): https://edk2.groups.io/g/devel/message/107289
Mute This Topic: https://groups.io/mt/100190622/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
prev parent reply other threads:[~2023-07-27 2:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-17 7:44 [edk2-devel] [PATCH v2 1/1] ShellPkg: Acpiview/GTDT: Print timer flags information levi.yun
2023-07-27 2:54 ` Gao, Zhichao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH7PR11MB6377D5359D3638AA5AC9F19CF601A@PH7PR11MB6377.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox