From: "Abner Chang" <abner.chang@hpe.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"lichao@loongson.cn" <lichao@loongson.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>,
Zhiguang Liu <zhiguang.liu@intel.com>,
"Baoqi Zhang" <zhangbaoqi@loongson.cn>
Subject: Re: [edk2-devel] [staging/LoongArch RESEND PATCH v1 24/33] MdePkg/BasePeCoff: Add LoongArch PE/Coff related code.
Date: Fri, 8 Apr 2022 09:38:48 +0000 [thread overview]
Message-ID: <PH7PR84MB1885B59704AB05D4E3C56ACBFFE99@PH7PR84MB1885.NAMPRD84.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <20220209065600.2989284-1-lichao@loongson.cn>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chao Li
> Sent: Wednesday, February 9, 2022 2:56 PM
> To: devel@edk2.groups.io
> Cc: Michael D Kinney <michael.d.kinney@intel.com>; Liming Gao
> <gaoliming@byosoft.com.cn>; Zhiguang Liu <zhiguang.liu@intel.com>; Baoqi
> Zhang <zhangbaoqi@loongson.cn>
> Subject: [edk2-devel] [staging/LoongArch RESEND PATCH v1 24/33]
> MdePkg/BasePeCoff: Add LoongArch PE/Coff related code.
>
> Add LoongArch image relocation.
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
>
> Signed-off-by: Chao Li <lichao@loongson.cn>
> Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
> ---
> MdePkg/Library/BasePeCoffLib/BasePeCoff.c | 3 +-
> .../Library/BasePeCoffLib/BasePeCoffLib.inf | 5 +
> .../Library/BasePeCoffLib/BasePeCoffLib.uni | 2 +
> .../BasePeCoffLib/LoongArch/PeCoffLoaderEx.c | 132
> ++++++++++++++++++
> 4 files changed, 141 insertions(+), 1 deletion(-)
> create mode 100644
> MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c
>
> diff --git a/MdePkg/Library/BasePeCoffLib/BasePeCoff.c
> b/MdePkg/Library/BasePeCoffLib/BasePeCoff.c
> index 6d8d9faeb8..97a8aaf8c7 100644
> --- a/MdePkg/Library/BasePeCoffLib/BasePeCoff.c
> +++ b/MdePkg/Library/BasePeCoffLib/BasePeCoff.c
> @@ -1,6 +1,6 @@
> /** @file
> Base PE/COFF loader supports loading any PE32/PE32+ or TE image, but
> - only supports relocating IA32, x64, IPF, ARM, RISC-V and EBC images.
> + only supports relocating IA32, x64, IPF, ARM, RISC-V, LoongArch and EBC
> images.
>
> Caution: This file requires additional review when modified.
> This library will have external input - PE/COFF image.
> @@ -18,6 +18,7 @@
> Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
> Portions Copyright (c) 2020, Hewlett Packard Enterprise Development LP.
> All rights reserved.<BR>
> + Portions Copyright (c) 2022, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
> diff --git a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> index 110b6d5a09..3b8b8eb191 100644
> --- a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> +++ b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> @@ -4,6 +4,7 @@
> # The IA32 version library support loading IA32, X64 and EBC PE/COFF images.
> # The X64 version library support loading IA32, X64 and EBC PE/COFF images.
> # The RISC-V version library support loading RISC-V images.
> +# The LoongArch version library support loading LoongArch images.
> #
> # Caution: This module requires additional review when modified.
> # This library will have external input - PE/COFF image.
> @@ -13,6 +14,7 @@
> # Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> # Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
> # Portions Copyright (c) 2020, Hewlett Packard Enterprise Development LP.
> All rights reserved.<BR>
> +# Portions Copyright (c) 2022, Loongson Technology Corporation Limited. All
> rights reserved.<BR>
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -46,6 +48,9 @@
> [Sources.RISCV64]
> RiscV/PeCoffLoaderEx.c
>
> +[Sources.LOONGARCH64]
> + LoongArch/PeCoffLoaderEx.c
> +
> [Packages]
> MdePkg/MdePkg.dec
>
> diff --git a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni
> b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni
> index 55417029f2..1f731344e1 100644
> --- a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni
> +++ b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni
> @@ -5,6 +5,7 @@
> // The IA32 version library support loading IA32, X64 and EBC PE/COFF
> images.
> // The X64 version library support loading IA32, X64 and EBC PE/COFF images.
> // The RISC-V version library support loading RISC-V32 and RISC-V64 PE/COFF
> images.
> +// The LoongArch version library support loading LoongArch32 and
> LoongArch64 PE/COFF images.
> //
> // Caution: This module requires additional review when modified.
> // This library will have external input - PE/COFF image.
> @@ -14,6 +15,7 @@
> // Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> // Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
> // Portions Copyright (c) 2020, Hewlett Packard Enterprise Development LP.
> All rights reserved.<BR>
> +// Portions Copyright (c) 2022, Loongson Technology Corporation Limited.
> All rights reserved.<BR>
> //
> // SPDX-License-Identifier: BSD-2-Clause-Patent
> //
> diff --git a/MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c
> b/MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c
> new file mode 100644
> index 0000000000..ec572c2dd6
> --- /dev/null
> +++ b/MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c
> @@ -0,0 +1,132 @@
> +/** @file
> + PE/Coff loader for LoongArch PE image
> +
> + Copyright (c) 2022, Loongson Technology Corporation Limited. All rights
> reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +**/
> +
> +#include "BasePeCoffLibInternals.h"
> +#include <Library/BaseLib.h>
> +
> +/**
> + Performs an LoongArch specific relocation fixup and is a no-op on other
> + instruction sets.
> +
> + @param Reloc Pointer to the relocation record.
> + @param Fixup Pointer to the address to fix up.
> + @param FixupData Pointer to a buffer to log the fixups.
> + @param Adjust The offset to adjust the fixup.
> +
> + @return Status code.
> +
> +**/
> +RETURN_STATUS
> +PeCoffLoaderRelocateImageEx (
> + IN UINT16 *Reloc,
> + IN OUT CHAR8 *Fixup,
> + IN OUT CHAR8 **FixupData,
> + IN UINT64 Adjust
> + )
> +{
> + UINT8 RelocType;
> + UINT64 Value = 0;
> + UINT64 Tmp1 = 0;
> + UINT64 Tmp2 = 0;
> +
> + RelocType = (*Reloc) >> 12;
> +
> + switch (RelocType) {
> + case EFI_IMAGE_REL_BASED_LOONGARCH64_MARK_LA:
> + Value = (*(UINT32*)Fixup & 0x1ffffe0) << 7 | /* lu12i.w 20bits from
> bit5 */
> + (*((UINT32*)Fixup + 1) & 0x3ffc00) >> 10; /* ori 12bits from bit10 */
> + Tmp1 = *((UINT32*)Fixup + 2) & 0x1ffffe0; /* lu32i.d 20bits from bit5
> */
> + Tmp2 = *((UINT32*)Fixup + 3) & 0x3ffc00; /* lu52i.d 12bits from
> bit10 */
> + Value = Value | (Tmp1 << 27) | (Tmp2 << 42);
> + Value += Adjust;
Please use double back slash for the comments in the function in this file.
Abner
> +
> + *(UINT32*)Fixup = (*(UINT32*)Fixup & ~0x1ffffe0) | (((Value >> 12) &
> 0xfffff) << 5);
> + if (*FixupData != NULL) {
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
> + *(UINT32 *) (*FixupData) = *(UINT32*)Fixup;
> + *FixupData = *FixupData + sizeof (UINT32);
> + }
> +
> + Fixup += sizeof(UINT32);
> + *(UINT32*)Fixup = (*(UINT32*)Fixup & ~0x3ffc00) | ((Value & 0xfff) <<
> 10);
> + if (*FixupData != NULL) {
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
> + *(UINT32 *) (*FixupData) = *(UINT32*)Fixup;
> + *FixupData = *FixupData + sizeof (UINT32);
> + }
> +
> + Fixup += sizeof(UINT32);
> + *(UINT32*)Fixup = (*(UINT32*)Fixup & ~0x1ffffe0) | (((Value >> 32) &
> 0xfffff) << 5);
> + if (*FixupData != NULL) {
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
> + *(UINT32 *) (*FixupData) = *(UINT32*)Fixup;
> + *FixupData = *FixupData + sizeof (UINT32);
> + }
> +
> + Fixup += sizeof(UINT32);
> + *(UINT32*)Fixup = (*(UINT32*)Fixup & ~0x3ffc00) | (((Value >> 52) &
> 0xfff) << 10);
> + if (*FixupData != NULL) {
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
> + *(UINT32 *) (*FixupData) = *(UINT32*)Fixup;
> + *FixupData = *FixupData + sizeof (UINT32);
> + }
> + break;
> + default:
> + return RETURN_UNSUPPORTED;
> + }
> +
> + return RETURN_SUCCESS;
> +}
> +
> +/**
> + Returns TRUE if the machine type of PE/COFF image is supported.
> Supported
> + does not mean the image can be executed it means the PE/COFF loader
> supports
> + loading and relocating of the image type. It's up to the caller to support
> + the entry point.
> +
> + @param Machine Machine type from the PE Header.
> +
> + @return TRUE if this PE/COFF loader can load the image
> +
> +**/
> +BOOLEAN
> +PeCoffLoaderImageFormatSupported (
> + IN UINT16 Machine
> + )
> +{
> + if (Machine == IMAGE_FILE_MACHINE_LOONGARCH64) {
> + return TRUE;
> + }
> +
> + return FALSE;
> +}
> +
> +/**
> + Performs an LOONGARCH-based specific re-relocation fixup and is a no-op
> on other
> + instruction sets. This is used to re-relocated the image into the EFI virtual
> + space for runtime calls.
> +
> + @param Reloc The pointer to the relocation record.
> + @param Fixup The pointer to the address to fix up.
> + @param FixupData The pointer to a buffer to log the fixups.
> + @param Adjust The offset to adjust the fixup.
> +
> + @return Status code.
> +
> +**/
> +RETURN_STATUS
> +PeHotRelocateImageEx (
> + IN UINT16 *Reloc,
> + IN OUT CHAR8 *Fixup,
> + IN OUT CHAR8 **FixupData,
> + IN UINT64 Adjust
> + )
> +{
> + /* to check */
> + return PeCoffLoaderRelocateImageEx (Reloc, Fixup, FixupData, Adjust);
> +}
> --
> 2.27.0
>
>
>
>
>
next prev parent reply other threads:[~2022-04-08 9:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 6:56 [staging/LoongArch RESEND PATCH v1 24/33] MdePkg/BasePeCoff: Add LoongArch PE/Coff related code Chao Li
2022-04-08 9:38 ` Abner Chang [this message]
2022-04-12 9:39 ` [edk2-devel] " Chao Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH7PR84MB1885B59704AB05D4E3C56ACBFFE99@PH7PR84MB1885.NAMPRD84.PROD.OUTLOOK.COM \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox