From: "Zhang, Zifeng" <zifeng.zhang@intel.com>
To: gaoliming <gaoliming@byosoft.com.cn>,
"Yang, Yuting2" <yuting2.yang@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: 'Rebecca Cran' <rebecca@bsdio.com>,
"Feng, Bob C" <bob.c.feng@intel.com>,
"Chen, Christine" <yuwei.chen@intel.com>,
"Chen, Arthur G" <arthur.g.chen@intel.com>
Subject: Re: [edk2-devel] [Patch V3] BaseTools: VfrCompiler Adds DefaultValueError
Date: Mon, 11 Mar 2024 02:27:12 +0000 [thread overview]
Message-ID: <SN6PR11MB2815C06C6CE210AA0DD7F16E82242@SN6PR11MB2815.namprd11.prod.outlook.com> (raw)
In-Reply-To: <03d801da7167$818247a0$8486d6e0$@byosoft.com.cn>
Thanks for sharing.
Best Regards,
Zifeng
-----Original Message-----
From: gaoliming <gaoliming@byosoft.com.cn>
Sent: Friday, March 8, 2024 10:47 PM
To: Zhang, Zifeng <zifeng.zhang@intel.com>; Yang, Yuting2 <yuting2.yang@intel.com>; devel@edk2.groups.io
Cc: 'Rebecca Cran' <rebecca@bsdio.com>; Feng, Bob C <bob.c.feng@intel.com>; Chen, Christine <yuwei.chen@intel.com>; Chen, Arthur G <arthur.g.chen@intel.com>
Subject: 回复: [Patch V3] BaseTools: VfrCompiler Adds DefaultValueError
Zifeng:
For Structure PCD, https://edk2.groups.io/g/devel/message/18432 is the summary of code change.
Below is two wikis about its usage.
https://github.com/lgao4/edk2/wiki/StrucutrePcd-Usage
https://github.com/lgao4/edk2/wiki/StructurePcd-Enable-Steps
For the patch table configuration, the structure PCD can be defined to map the patch table structure.
Then, the patch table value can be specified in DSC in the different SkuId
(boardId) to support multiple SKUs.
Structure PCD can make DSC as the centralized way for the platform configuration.
The developer doesn't need to maintain the board setting in C source file.
Thanks
Liming
> -----邮件原件-----
> 发件人: Zhang, Zifeng <zifeng.zhang@intel.com>
> 发送时间: 2024年3月7日 14:54
> 收件人: Yang, Yuting2 <yuting2.yang@intel.com>; devel@edk2.groups.io
> 抄送: Rebecca Cran <rebecca@bsdio.com>; Liming Gao
> <gaoliming@byosoft.com.cn>; Feng, Bob C <bob.c.feng@intel.com>; Chen,
> Christine <yuwei.chen@intel.com>; Chen, Arthur G
> <arthur.g.chen@intel.com>
> 主题: RE: [Patch V3] BaseTools: VfrCompiler Adds DefaultValueError
>
> Hi Liming,
>
> Could you help to review the patch for VFR compiler change submitted
> by Yuting?
>
> Btw,
> Dell need some introduction of Hii StructurePCD implementation
> especially for replacing patch table configurations.
> Would you like to share EDK2 wiki link or doc for it?
>
> Best Regards,
> Zifeng
>
>
> -----Original Message-----
> From: Yang, Yuting2 <yuting2.yang@intel.com>
> Sent: Friday, January 26, 2024 10:54 AM
> To: devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>; Liming Gao
> <gaoliming@byosoft.com.cn>; Feng, Bob C <bob.c.feng@intel.com>; Chen,
> Christine <yuwei.chen@intel.com>; Zhang, Zifeng
> <zifeng.zhang@intel.com>
> Subject: [Patch V3] BaseTools: VfrCompiler Adds DefaultValueError
>
> Add --catch_default option to raise a DefaultValueError when
> encountering VFR default definitions to help remove default variables.
>
> Signed-off-by: Yuting Yang <yuting2.yang@intel.com>
>
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Bob Feng <bob.c.feng@intel.com>
> Cc: Christine Chen <yuwei.chen@intel.com>
> Cc: Zifeng Zhang <zifeng.zhang@intel.com>
> Signed-off-by: Yuting Yang <yuting2.yang@intel.com>
> ---
> BaseTools/Source/C/VfrCompile/VfrCompiler.cpp | 8 +-
> BaseTools/Source/C/VfrCompile/VfrCompiler.h | 1 +
> BaseTools/Source/C/VfrCompile/VfrError.cpp | 3 +-
> BaseTools/Source/C/VfrCompile/VfrError.h | 3 +-
> BaseTools/Source/C/VfrCompile/VfrFormPkg.h | 1 +
> BaseTools/Source/C/VfrCompile/VfrSyntax.g | 238 ++++++++++--------
> 6 files changed, 150 insertions(+), 104 deletions(-)
>
> diff --git a/BaseTools/Source/C/VfrCompile/VfrCompiler.cpp
> b/BaseTools/Source/C/VfrCompile/VfrCompiler.cpp
> index 5f4d262d85..4031af6e39 100644
> --- a/BaseTools/Source/C/VfrCompile/VfrCompiler.cpp
> +++ b/BaseTools/Source/C/VfrCompile/VfrCompiler.cpp
> @@ -78,6 +78,7 @@ CVfrCompiler::OptionInitialization (
> mOptions.WarningAsError = FALSE;
> mOptions.AutoDefault = FALSE;
> mOptions.CheckDefault = FALSE;+
> mOptions.IsCatchDefaultEnable = FALSE; memset
> (&mOptions.OverrideClassGuid, 0, sizeof (EFI_GUID)); if (Argc == 1) {@@
> -95,6 +96,8 @@ CVfrCompiler::OptionInitialization (
> Version (); SET_RUN_STATUS (STATUS_DEAD);
> return;+ } else if (stricmp(Argv[Index], "--catch_default") == 0){+
> mOptions.IsCatchDefaultEnable = TRUE; } else if (stricmp(Argv[Index],
> "-l") == 0) { mOptions.CreateRecordListFile = TRUE;
> gCIfrRecordInfoDB.TurnOn ();@@ -179,7 +182,6 @@
> CVfrCompiler::OptionInitialization (
> goto Fail; } strcpy (mOptions.VfrFileName, Argv[Index]);-
> if (mOptions.OutputDirectory == NULL) { mOptions.OutputDirectory =
> (CHAR8 *) malloc (1); if (mOptions.OutputDirectory == NULL) {@@
> -679,7 +681,7 @@ CVfrCompiler::Compile (
> DebugError (NULL, 0, 0001, "Error opening the input file", "%s",
> InFileName); goto Fail; }-+ InputInfo.IsCatchDefaultEnable =
> mOptions.IsCatchDefaultEnable; if (mOptions.HasOverrideClassGuid)
> { InputInfo.OverrideClassGuid = &mOptions.OverrideClassGuid; } else
> {@@ -937,5 +939,3 @@ main (
> return GetUtilityStatus (); }--diff --git
> a/BaseTools/Source/C/VfrCompile/VfrCompiler.h
> b/BaseTools/Source/C/VfrCompile/VfrCompiler.h
> index b6e207d2ce..974f37c4eb 100644
> --- a/BaseTools/Source/C/VfrCompile/VfrCompiler.h
> +++ b/BaseTools/Source/C/VfrCompile/VfrCompiler.h
> @@ -52,6 +52,7 @@ typedef struct {
> BOOLEAN WarningAsError; BOOLEAN AutoDefault; BOOLEAN
> CheckDefault;+ BOOLEAN IsCatchDefaultEnable; } OPTIONS; typedef enum
> {diff --git a/BaseTools/Source/C/VfrCompile/VfrError.cpp
> b/BaseTools/Source/C/VfrCompile/VfrError.cpp
> index 65bb8e34fd..8a706f929b 100644
> --- a/BaseTools/Source/C/VfrCompile/VfrError.cpp
> +++ b/BaseTools/Source/C/VfrCompile/VfrError.cpp
> @@ -49,7 +49,8 @@ static SVFR_WARNING_HANDLE VFR_WARNING_HANDLE_TABLE
> [] = {
> { VFR_WARNING_DEFAULT_VALUE_REDEFINED, ": default value re-defined
> with different value"}, { VFR_WARNING_ACTION_WITH_TEXT_TWO, ": Action
> opcode should not have TextTwo part"}, {
> VFR_WARNING_OBSOLETED_FRAMEWORK_OPCODE, ": Not recommend to use
> obsoleted framework opcode"},- { VFR_WARNING_CODEUNDEFINED, ":
> undefined Warning Code" }+ { VFR_WARNING_CODEUNDEFINED, ":
> undefined Warning Code" },+ { VFR_WARNING_UNSUPPORTED, ": pls remove
> the default values if necessary" } }; CVfrErrorHandle::CVfrErrorHandle
> (diff --git a/BaseTools/Source/C/VfrCompile/VfrError.h
> b/BaseTools/Source/C/VfrCompile/VfrError.h
> index 7d16bd5f74..1b4bc173d2 100644
> --- a/BaseTools/Source/C/VfrCompile/VfrError.h
> +++ b/BaseTools/Source/C/VfrCompile/VfrError.h
> @@ -47,7 +47,8 @@ typedef enum {
> VFR_WARNING_DEFAULT_VALUE_REDEFINED = 0,
> VFR_WARNING_ACTION_WITH_TEXT_TWO,
> VFR_WARNING_OBSOLETED_FRAMEWORK_OPCODE,-
> VFR_WARNING_CODEUNDEFINED+ VFR_WARNING_CODEUNDEFINED,+
> VFR_WARNING_UNSUPPORTED } EFI_VFR_WARNING_CODE; typedef struct
> _SVFR_ERROR_HANDLE {diff --git
> a/BaseTools/Source/C/VfrCompile/VfrFormPkg.h
> b/BaseTools/Source/C/VfrCompile/VfrFormPkg.h
> index 9ef6f07787..d8fada3bcb 100644
> --- a/BaseTools/Source/C/VfrCompile/VfrFormPkg.h
> +++ b/BaseTools/Source/C/VfrCompile/VfrFormPkg.h
> @@ -96,6 +96,7 @@ struct SBufferNode {
> typedef struct { EFI_GUID *OverrideClassGuid;+ BOOLEAN
> IsCatchDefaultEnable; } INPUT_INFO_TO_SYNTAX; class CFormPkg {diff
> --git a/BaseTools/Source/C/VfrCompile/VfrSyntax.g
> b/BaseTools/Source/C/VfrCompile/VfrSyntax.g
> index 55fd067f8a..5daf1c423c 100644
> --- a/BaseTools/Source/C/VfrCompile/VfrSyntax.g
> +++ b/BaseTools/Source/C/VfrCompile/VfrSyntax.g
> @@ -50,6 +50,7 @@ VfrParserStart (
> { ParserBlackBox<CVfrDLGLexer, EfiVfrParser, ANTLRToken>
> VfrParser(File); VfrParser.parser()->SetOverrideClassGuid
> (InputInfo->OverrideClassGuid);+
>
VfrParser.parser()->SetIsCatchDefaultEnable(InputInfo->IsCatchDefaultEnable
> ); return VfrParser.parser()->vfrProgram(); } >>@@ -386,8 +387,8 @@
> dataStructField32 [BOOLEAN FieldInUnion]:
> ; dataStructField16 [BOOLEAN FieldInUnion]:- << - UINT32
> ArrayNum = 0; + <<+ UINT32 ArrayNum = 0; >> ("UINT16" |
> "CHAR16") N:StringIdentifier@@ -737,7 +738,7 @@ vfrFormSetList :
> ; vfrStatementExtension:- << + << EFI_GUID Guid;
> CIfrGuid *GuidObj = NULL; CHAR8 *TypeName = NULL;@@
> -751,7 +752,7 @@ vfrStatementExtension:
> >> L:GuidOp Uuid "=" guidDefinition[Guid]- {"," DataType "=" +
> {"," DataType "=" ( U64:"UINT64" {OpenBracket
> AN1:Number CloseBracket <<ArrayNum = _STOU32(AN1->getText(),
> AN1->getLine());>>}
> << TypeName = U64->getText(); LineNum = U64->getLine(); >>@@ -770,7
> +771,7 @@ vfrStatementExtension:
> | T:"EFI_HII_TIME" {OpenBracket AN8:Number CloseBracket
> <<ArrayNum = _STOU32(AN8->getText(), AN8->getLine());>>} << TypeName =
> T->getText(); LineNum = T->getLine(); IsStruct = TRUE;>>
> | R:"EFI_HII_REF" {OpenBracket AN9:Number CloseBracket <<ArrayNum =
> _STOU32(AN9->getText(), AN9->getLine());>>}- << TypeName =
> R->getText(); LineNum = R->getLine(); IsStruct = TRUE;>>
> + <<
> TypeName = R->getText(); LineNum = R->getLine(); IsStruct = TRUE;>>
> | TN:StringIdentifier {OpenBracket AN10:Number CloseBracket <<ArrayNum
> = _STOU32(AN10->getText(), AN10->getLine());>>} << TypeName =
> TN->getText(); LineNum = TN->getLine(); IsStruct =
> TRUE;>> )@@ -875,19 +876,19 @@ vfrExtensionData[UINT8 *DataBuff,
> UINT32 Size, CHAR8 *TypeName, UINT32 TypeSize,
> memcpy (ByteOffset, &Data_U64,
> TypeSize); }else if (strcmp ("UINT32", TypeName) == 0)
> { Data_U32 = _STOU32(RD->getText(), RD->getLine());-
> memcpy (ByteOffset, &Data_U32, TypeSize);
> + memcpy (ByteOffset, &Data_U32,
> TypeSize); }else if (strcmp ("UINT16", TypeName) == 0)
> { Data_U16 = _STOU16(RD->getText(), RD->getLine());-
> memcpy (ByteOffset, &Data_U16, TypeSize);
> + memcpy (ByteOffset, &Data_U16,
> TypeSize); }else if (strcmp ("UINT8", TypeName) == 0)
> { Data_U8 = _STOU8(RD->getText(), RD->getLine());-
> memcpy (ByteOffset, &Data_U8, TypeSize);
> + memcpy (ByteOffset, &Data_U8,
> TypeSize); }else if (strcmp ("BOOLEAN", TypeName)== 0)
> { Data_BL = _STOU8(RD->getText(), RD->getLine());-
> memcpy (ByteOffset, &Data_BL, TypeSize);
> + memcpy (ByteOffset, &Data_BL,
> TypeSize); }else if (strcmp ("EFI_STRING_ID", TypeName) ==
> 0) { Data_SID = _STOSID(RD->getText(), RD->getLine());-
> memcpy (ByteOffset, &Data_SID, TypeSize);
> + memcpy (ByteOffset, &Data_SID,
> TypeSize); } } else
> { gCVfrVarDataTypeDB.GetDataFieldInfo(TFName,
> FieldOffset, FieldType, FieldSize, BitField);@@ -975,7 +976,15 @@
> vfrExtensionData[UINT8 *DataBuff, UINT32 Size, CHAR8 *TypeName, UINT32
> TypeSize,
> vfrStatementDefaultStore : << UINT16 DefaultId =
> EFI_HII_DEFAULT_CLASS_STANDARD; >>- D:DefaultStore N:StringIdentifier
> ","+ D:DefaultStore N:StringIdentifier "," <<+
> if (mIsCatchDefaultEnable) {+
> gCVfrErrorHandle.HandleWarning (+
> VFR_WARNING_UNSUPPORTED,+
> D->getLine(),+
> D->getText()+
> );+
> }+ >>
> Prompt "=" "STRING_TOKEN" "\(" S:Number "\)" { "," Attribute "="
> A:Number << DefaultId = _STOU16(A->getText(),
> A->getLine()); >>@@ -1074,7 +1083,7 @@ vfrStatementVarStoreEfi :
> | U64:"UINT64" "," << TypeName
> = U64->getText(); LineNum = U64->getLine(); >> | D:"EFI_HII_DATE" ","
> << TypeName = D->getText(); LineNum = D->getLine(); >> |
> T:"EFI_HII_TIME" "," << TypeName =
> T->getText(); LineNum = T->getLine(); >>- | R:"EFI_HII_REF" ","
> << TypeName = R->getText(); LineNum = R->getLine(); >> + |
> R:"EFI_HII_REF" "," << TypeName =
> R->getText(); LineNum = R->getLine(); >> ) { VarId "=" ID:Number
> "," <<@@ -1092,8 +1101,8 @@
> vfrStatementVarStoreEfi :
> ( Name "=" SN:StringIdentifier "," << StoreName
> = SN->getText(); >> |- Name "=" "STRING_TOKEN" "\("
> VN:Number "\)" "," - VarSize "=" N:Number ","
> << + Name "=" "STRING_TOKEN" "\(" VN:Number "\)" ","+
> VarSize "=" N:Number "," <<
> IsUEFI23EfiVarstore = FALSE;
> StoreName =
> gCVfrStringDB.GetVarStoreNameFormStringId(_STOSID(VN->getText(),
> VN->getLine()));
> if (StoreName == NULL) {@@ -1116,7 +1125,7 @@ vfrStatementVarStoreEfi :
> break; case
> 8:
> TypeName = (CHAR8 *) "UINT64";-
> break; +
> break;
> default:
> _PCATCH (VFR_RETURN_UNSUPPORTED, N);
> break;@@ -1124,7 +1133,7 @@ vfrStatementVarStoreEfi :
> >> ) -
> Uuid "=" guidDefinition[Guid] << + Uuid "="
> guidDefinition[Guid] <<
> if (IsUEFI23EfiVarstore)
> { _PCAT
> CH(gCVfrDataStorage.DeclareBufferVarStore
> (
> StoreName,@@ -1150,7 +1159,7 @@
> vfrStatementVarStoreEfi :
> }
> VSEObj.SetGuid (&Guid); VSEObj.SetVarStoreId (VarStoreId);-
> +
> VSEObj.SetSize ((UINT16) Size);
> VSEObj.SetName (StoreName);
> if (IsUEFI23EfiVarstore == FALSE && StoreName != NULL) {@@ -1184,7
> +1193,7 @@ vfrStatementVarStoreNameValue :
> >> }
> (- Name "=" "STRING_TOKEN" "\(" N:Number "\)" "," << + Name
> "=" "STRING_TOKEN" "\(" N:Number "\)" "," << if (!Created)
> { _PC
> ATCH(gCVfrDataStorage.DeclareNameVarStoreBegin (SN->getText(),
> VarStoreId), SN); Created = TRUE;@@ -1245,12 +1254,12 @@
> vfrStatementDisableIfFormSet :
> vfrStatementSuppressIfFormSet : << CIfrSuppressIf SIObj;>>
> L:SuppressIf <<-
> SIObj.SetLineNo(L->getLine()); +
> SIObj.SetLineNo(L->getLine());
> >> { FLAGS "=" flagsField ( "\|" flagsField )* "," }
> vfrStatementExpression[0] ";" vfrFormSetList- E: EndIf + E: EndIf
";"
> << CRT_END_OP (E); >> ; @@ -1491,7 +1500,7 @@
> vfrQuestionDataFieldName [EFI_QUESTION_ID &QId, UINT32 &Mask, CHAR8
> *&VarIdStr,
> ( SN2:StringIdentifier << _STRCAT
> (&VarIdStr, SN2->getText()); LineNo = SN2->getLine(); >> (- "."
> << + "." <<
> _STRCAT (&VarIdStr, ".");
> if (mConstantOnlyInExpression)
> { _PC
> ATCH(VFR_RETURN_CONSTANT_ONLY, LineNo);@@ -1518,7 +1527,7 @@
> vfrQuestionDataFieldName [EFI_QUESTION_ID &QId, UINT32 &Mask, CHAR8
> *&VarIdStr,
> ; vfrConstantValueField[UINT8 Type, EFI_IFR_TYPE_VALUE &Value,
> BOOLEAN &ListType] :- << + << EFI_GUID Guid;
> BOOLEAN Negative = FALSE; BOOLEAN IntDecStyle =
> FALSE;@@ -1634,11 +1643,11 @@ vfrConstantValueField[UINT8 Type,
> EFI_IFR_TYPE_VALUE &Value, BOOLEAN &ListType]
> | Z:Zero << $Value.u8
> = _STOU8(Z->getText(), Z->getLine()); >> | HOUR:Number ":"
> MINUTE:Number ":" SECOND:Number << $Value.time =
> _STOT(HOUR->getText(), MINUTE->getText(),SECOND->getText(),
> HOUR->getLine()); >> | YEAR:Number "/" MONTH:Number "/"
> DAY:Number << $Value.date = _STOD(YEAR->getText(),
> MONTH->getText(), DAY->getText(), YEAR->getLine()); >>- | QI:Number";"
> FI:Number";" guidDefinition[Guid] ";" "STRING_TOKEN" "\(" DP:Number
> "\)" +
> | QI:Number";" FI:Number";" guidDefinition[Guid] ";" "STRING_TOKEN" "\("
> DP:Number "\)"
> << $Value.ref = _STOR(QI->getText(), FI->getText(), &Guid,
DP->getText(),
> QI->getLine()); >> | "STRING_TOKEN" "\(" S1:Number "\)"
> << $Value.string = _STOSID(S1->getText(), S1->getLine()); >> | "\{"
> << ListType = TRUE; >>- L1:Number
> << + L1:Number <<
> switch (Type)
> { case
> EFI_IFR_TYPE_NUM_SIZE_8 :
> Type8[Index] = _STOU8(L1->getText(), L1->getLine());@@ -1658,8
> +1667,8 @@ vfrConstantValueField[UINT8 Type, EFI_IFR_TYPE_VALUE
> &Value, BOOLEAN &ListType]
>
> Index++; >>
> (- "," - L2:Number
> << + ","+ L2:Number
> <<
> switch (Type)
> { case
> EFI_IFR_TYPE_NUM_SIZE_8 :
> Type8[Index] = _STOU8(L2->getText(), L2->getLine());@@ -1679,7
> +1688,7 @@ vfrConstantValueField[UINT8 Type, EFI_IFR_TYPE_VALUE
> &Value, BOOLEAN &ListType]
>
> Index++; >>
> )*- "\}" +
> "\}" ;
> //************************************************************
> *****************@@ -1714,7 +1723,7 @@ vfrFormDefinition :
> ; vfrFormMapDefinition :- << + << CIfrFormMap *FMapObj =
> NULL; UINT32 FormMapMethodNumber = 0; EFI_GUID
> Guid;@@ -1775,11 +1784,15 @@ vfrStatementDefault :
> CIfrNumeric *NumericQst = NULL; >>-
> D:Default + D:Default
> <<+ if
> (mIsCatchDefaultEnable) {+
> DefaultValueError(VFR_RETURN_UNSUPPORTED,
> D->getLine());+
> }+ >>
> ( (- "=" vfrConstantValueField[_GET_CURRQEST_DATATYPE(),
> *Val, ArrayType] "," -
> << + "=" vfrConstantValueField[_GET_CURRQEST_DATATYPE(), *Val,
> ArrayType] ","+
> << if
> (gCurrentMinMaxData != NULL &&
> gCurrentMinMaxData->IsNumericOpcode())
> { //c
> heck default value is valid for Numeric Opcode NumericQst =
> (CIfrNumeric *) gCurrentQuestion;@@ -1888,14 +1901,14 @@
> vfrStatementDefault :
> vfrStatementValue "," << CIfrEnd
> EndObj1; EndObj1.SetLineNo(D->getLine()); >> ) {-
> DefaultStore "=" SN:StringIdentifier "," << + DefaultStore "="
> SN:StringIdentifier "," <<
> _PCATCH(gCVfrDefaultStore.GetDefaultId (SN->getText(), &DefaultId),
> SN); if (DObj != NULL) {-
> DObj->SetDefaultId (DefaultId);
> - } +
> DObj->SetDefaultId
> (DefaultId);+
> }
> if (DObj2 != NULL) {-
> DObj2->SetDefaultId (DefaultId); +
> DObj2->SetDefaultId
> (DefaultId);
> } >>
> }@@ -1917,8 +1930,8 @@ vfrStatementDefault :
>
> );
> } }-
> if (DObj != NULL) {delete DObj;} -
> if (DObj2 != NULL) {delete DObj2;} +
> if (DObj != NULL) {delete DObj;}+
> if (DObj2 != NULL) {delete
> DObj2;} >>
> ) ;@@ -1970,11 +1983,15 @@ vfrStatementInvalid :
> ; flagsField :- Number - | InteractiveFlag - |
> ManufacturingFlag -
> | DefaultFlag - | ResetRequiredFlag + Number+ | InteractiveFlag+ |
> ManufacturingFlag+ | D:DefaultFlag
> <<+ if
> (mIsCatchDefaultEnable) {+
> DefaultValueError(VFR_RETURN_UNSUPPORTED,
> D->getLine());+
> }+
> >>+ | ResetRequiredFlag | ReconnectRequiredFlag |
> N:NVAccessFlag <<
> gCVfrErrorHandle.HandleWarning (@@ -1989,7 +2006,7 @@ flagsField :
>
> L->getLine(),
> L->getText()
> );-
> >>
> + >> ;
> vfrStatementValue :@@ -2001,13 +2018,13 @@ vfrStatementValue :
> vfrStatementRead : << CIfrRead RObj; >> R:Read
> << RObj.SetLineNo(R->getLine()); >>- vfrStatementExpression[0] ";" +
> vfrStatementExpression[0] ";" ; vfrStatementWrite : << CIfrWrite
> WObj; >> W:Write
> << WObj.SetLineNo(W->getLine()); >>- vfrStatementExpression[0] ";" +
> vfrStatementExpression[0] ";" ; vfrStatementSubTitle :@@ -2140,7
> +2157,7 @@ vfrStatementGoto :
> FormId "=" F3:Number "," << RefType
> = 2; FId = _STOFID(F3->getText(), F3->getLine()); >> Question "="
> (- QN3:StringIdentifier "," << +
> QN3:StringIdentifier "," <<
> mCVfrQuestionDB.GetQuestionId (QN3->getText (), NULL, QId, BitMask);
> if (QId == EFI_QUESTION_ID_INVALID) { _PCATCH(VFR_RETURN_UNDEFINED,
> QN3);@@ -2222,7 +2239,7 @@ vfrStatementGoto :
> "," Key "=" KN:Number <<
> AssignQuestionKey (*QHObj, KN); >> } {- E:"," + E:","
> vfrStatementQuestionOptionList <<
> OHObj->SetScope(1); CRT_END_OP (E);>> } ";"
> << if (R1Obj != NULL) {delete R1Obj;} if (R2Obj != NULL) {delete
> R2Obj;}
if
> (R3Obj != NULL) {delete R3Obj;} if (R4Obj != NULL) {delete R4Obj;} if
> (R5Obj != NULL) {delete R5Obj;}>>@@ -2511,20 +2528,20 @@
> minMaxDateStepDefault[EFI_HII_DATE & D, UINT8 KeyValue] :
> { "default" "=" N:Number "," <<
> switch (KeyValue) {-
> case 0: +
> case 0:
> D.Year = _STOU16(N->getText(), N->getLine()); if (D.Year < _STOU16
> (MinN->getText(), MinN->getLine()) || D.Year >
_STOU16
> (MaxN->getText(), MaxN->getLine()))
> {
> _PCATCH (VFR_RETURN_INVALID_PARAMETER, N->getLine(), "Year default
> value must be between Min year and Max year.");
> }
> break;-
> case 1: -
> D.Month = _STOU8(N->getText(), N->getLine()); + case 1:+ D.Month =
> _STOU8(N->getText(), N->getLine()); if (D.Month < 1 || D.Month > 12) {
> _PCATCH (VFR_RETURN_INVALID_PARAMETER, N->getLine(), "Month default
> value must be between 1 and 12.");
> }
> break;-
> case 2: -
> D.Day = _STOU8(N->getText(), N->getLine()); + case 2:+ D.Day =
> _STOU8(N->getText(), N->getLine()); if (D.Day < 1 || D.Day > 31) {
> _PCATCH (VFR_RETURN_INVALID_PARAMETER, N->getLine(), "Day default
> value must be between 1 and 31.");
> }@@ -2570,7 +2587,7 @@ vfrSetMinMaxStep[CIfrMinMaxStepData &
> MMSDObj] :
> BOOLEAN MinNegative = FALSE; BOOLEAN MaxNegative =
> FALSE; >>- Minimum "=" + Minimum "=" { "\-"
> << MinNegative = TRUE; >> }@@ -2659,8 +2676,8 @@
> vfrSetMinMaxStep[CIfrMinMaxStepData & MMSDObj] :
> }
> }
> >>-
> Maximum "=" - { + Maximum "="+ { "\-"
> << MaxNegative = TRUE; >> } A:Number ","
> <<@@ -2889,7 +2906,7 @@ vfrStatementNumeric :
> }
> >>
> vfrStatementQuestionOptionList- E:EndNumeric
> << + E:EndNumeric <<
> CRT_END_OP (E);
> if (GuidObj != NULL)
> {
> GuidObj->SetScope(1);@@ -3131,7 +3148,7 @@ vfrStatementString :
> { Key "=" KN:Number "," <<
> AssignQuestionKey (SObj, KN); >> }- MinSize "=" MIN:Number ","
> << + MinSize "=" MIN:Number "," <<
> VarArraySize = _GET_CURRQEST_ARRAY_SIZE(); StringMinSize =
> _STOU8(MIN->getText(), MIN->getLine()); if (_STOU64(MIN->getText(),
> MIN->getLine()) > StringMinSize) {@@ -3141,7
> +3158,7 @@ vfrStatementString :
> }
> SObj.SetMinSize (StringMinSize);
> >>- MaxSize "=" MAX:Number ","
> << + MaxSize "=" MAX:Number "," <<
> StringMaxSize = _STOU8(MAX->getText(), MAX->getLine()); if
> (_STOU64(MAX->getText(), MAX->getLine()) > StringMaxSize) { _PCATCH
> (VFR_RETURN_INVALID_PARAMETER, MAX->getLine(), "String MaxSize takes
> only one byte, which can't be larger than 0xFF.");@@ -3185,7
> +3202,7 @@ vfrStatementPassword :
> { Key "=" KN:Number "," <<
> AssignQuestionKey (PObj, KN); >> }- MinSize "=" MIN:Number ","
> << + MinSize "=" MIN:Number "," <<
> VarArraySize = _GET_CURRQEST_ARRAY_SIZE(); PasswordMinSize =
> _STOU16(MIN->getText(), MIN->getLine()); if (_STOU64(MIN->getText(),
> MIN->getLine()) > PasswordMinSize) {@@
> -3195,7 +3212,7 @@ vfrStatementPassword :
> }
> PObj.SetMinSize (PasswordMinSize);
> >>- MaxSize "=" MAX:Number ","
> << + MaxSize "=" MAX:Number "," <<
> PasswordMaxSize = _STOU16(MAX->getText(), MAX->getLine()); if
> (_STOU64(MAX->getText(), MAX->getLine()) > PasswordMaxSize) { _PCATCH
> (VFR_RETURN_INVALID_PARAMETER, MAX->getLine(), "Password MaxSize takes
> only two byte, which can't be larger than 0xFFFF.");@@
> -3230,12 +3247,12 @@ vfrStatementOrderedList :
> >> L:OrderedList <<
> OLObj.SetLineNo(L->getLine()); gIsOrderedList = TRUE;>>
> vfrQuestionHeader[OLObj] ","-
> << + <<
> VarArraySize = _GET_CURRQEST_ARRAY_SIZE(); OLObj.SetMaxContainers
> ((UINT8) (VarArraySize > 0xFF ? 0xFF :
> VarArraySize));
> >> {- MaxContainers "=" M:Number ","
> << + MaxContainers "=" M:Number "," <<
> if (_STOU64(M->getText(), M->getLine()) > _STOU8(M->getText(),
> M->getLine()))
> {
> _PCATCH (VFR_RETURN_INVALID_PARAMETER, M->getLine(), "OrderedList
> MaxContainers takes only one byte, which can't be larger than 0xFF.");
> } else if (VarArraySize != 0 && _STOU8(M->getText(), M->getLine())
> >
> VarArraySize) {@@ -3328,19 +3345,19 @@
> minMaxTimeStepDefault[EFI_HII_TIME & T, UINT8 KeyValue] :
> { "default" "=" N:Number "," <<
> switch (KeyValue) {-
> case 0: -
> T.Hour = _STOU8(N->getText(), N->getLine()); +
> case 0:+
> T.Hour = _STOU8(N->getText(), N->getLine());
> if (T.Hour > 23)
> {
> _PCATCH (VFR_RETURN_INVALID_PARAMETER, N->getLine(), "Hour default
> value must be between 0 and 23.");
> }
> break;-
> case 1: -
> T.Minute = _STOU8(N->getText(), N->getLine()); + case 1:+ T.Minute =
> _STOU8(N->getText(), N->getLine()); if (T.Minute > 59) {
> _PCATCH (VFR_RETURN_INVALID_PARAMETER, N->getLine(), "Minute default
> value must be between 0 and 59.");
> }
> break;-
> case 2: +
> case 2:
> T.Second = _STOU8(N->getText(), N->getLine()); if (T.Second > 59) {
> _PCATCH (VFR_RETURN_INVALID_PARAMETER, N->getLine(), "Second default
> value must be between 0 and 59.");@@ -3419,11 +3436,11 @@
> vfrStatementStatListOld :
> ; vfrStatementDisableIfStat :- << - CIfrDisableIf DIObj; + <<+
> CIfrDisableIf DIObj; >> L:DisableIf
> << DIObj.SetLineNo(L->getLine()); >>- vfrStatementExpression[0] ";" +
> vfrStatementExpression[0] ";" ( vfrStatementStatList )* E:EndIf
> << CRT_END_OP (E); >> ";"@@ -3548,8 +3565,8 @@
> vfrStatementWarningIf :
> ; vfrStatementDisableIfQuest :- << - CIfrDisableIf DIObj; + <<+
> CIfrDisableIf DIObj; >> L:DisableIf
> << DIObj.SetLineNo(L->getLine()); >> vfrStatementExpression[0] ";"@@
> -3616,15 +3633,15 @@ vfrStatementOneOfOption :
> UINT32 *Type32 = (UINT32 *) ValueList;
> UINT64 *Type64 = (UINT64 *) ValueList; >>-
> L:Option << +
> L:Option <<
> if (_GET_CURRQEST_DATATYPE() == EFI_IFR_TYPE_OTHER) { _PCATCH
> (VFR_RETURN_FATAL_ERROR, L->getLine(), "Get data type error.");
> } >
> >- Text "=" "STRING_TOKEN" "\(" S:Number "\)" "," + Text "="
> "STRING_TOKEN" "\(" S:Number "\)" "," Value "="
> vfrConstantValueField[_GET_CURRQEST_DATATYPE(), *Val, ArrayType] ","-
> << + <<
> if (gCurrentMinMaxData != NULL)
> {
> //set min/max value for oneof opcode
> UINT64 Step =
> gCurrentMinMaxData->GetStepData(_GET_CURRQEST_DATATYPE(),
> _GET_CURRQEST_VARTINFO().mIsBitVar);@@ -3696,7 +3713,7 @@
> vfrStatementOneOfOption :
> Size
> += OFFSET_OF (EFI_IFR_ONE_OF_OPTION, Value);
> OOOObj = new CIfrOneOfOption((UINT8)Size);
> OOOObj->SetLineNo(L->getLine());-
> OOOObj->SetOption (_STOSID(S->getText(), S->getLine())); + SetOption
> OOOObj->(_STOSID(S->getText(), S->getLine()));
> if (ArrayType)
> {
> OOOObj->SetType
> (EFI_IFR_TYPE_BUFFER);
> } else {@@ -3706,7 +3723,7 @@ vfrStatementOneOfOption
> :
>
> OOOObj->SetType
> (_GET_CURRQEST_DATATYPE());
> }
> }-
> OOOObj->SetValue (*Val); +
> OOOObj->SetValue
> (*Val); >>
> F:FLAGS "=" vfrOneOfOptionFlags[*OOOObj, F->getLine()] <<@@ -3790,7
> +3807,12 @@ oneofoptionFlagsField [UINT8 & HFlags, UINT8 & LFlags] :
> | RestStyleFlag << $HFlags
> |= 0x20; >> | ReconnectRequiredFlag
> << $HFlags |= 0x40; >> | ManufacturingFlag
> << $LFlags |= 0x20; >>- | DefaultFlag << $LFlags |= 0x10; >>+ |
> D:DefaultFlag <<+ $LFlags |= 0x10;+ if (mIsCatchDefaultEnable) {+
> DefaultValueError(VFR_RETURN_UNSUPPORTED,
> D->getLine());+
> }+
> >> | A:NVAccessFlag
> <<
> gCVfrErrorHandle.HandleWarning
> (
> VFR_WARNING_OBSOLETED_FRAMEWORK_OPCODE,@@ -3963,7 +3985,7 @@
> vfrStatementExpression [UINT32 RootLevel, UINT32 ExpOpCount = 0] :
>
> }
> } }-
> + if
> ($RootLevel == 0)
> {
> _CLEAR_SAVED_OPHDR ();
> mCIfrOpHdrIndex --;@@ -4405,10 +4427,10 @@ ideqvallistExp[UINT32 &
> RootLevel, UINT32 & ExpOpCount] :
>
> for (Index = 0; Index < ListLen; Index++) {
> EILObj.SetValueList (Index,
> ValueList[Index]);
> }-
> +
> EILObj.UpdateIfrBuffer();-
> _SAVE_OPHDR_COND (EILObj, ($ExpOpCount == 0), L->getLine());
> - +
> _SAVE_OPHDR_COND (EILObj, ($ExpOpCount == 0), L->getLine());+ if (QId
> == EFI_QUESTION_ID_INVALID) {
> EILObj.SetQuestionId (QId, VarIdStr, LineNo);
> }@@ -4458,9 +4480,9 @@ stringref1Exp[UINT32 & RootLevel,
> UINT32 & ExpOpCount] :
> >> L:StringRef "\("- ( + ( "STRING_TOKEN"-
> "\(" + "\(" S:Number << RefStringId =
> _STOSID(S->getText(), S->getLine()); >> "\)" | I:Number
> << RefStringId = _STOSID(I->getText(), I->getLine()); >>@@ -4499,10
> +4521,
10
> @@ getExp[UINT32 & RootLevel, UINT32 & ExpOpCount] :
> Info.mVarStoreId = 0; >> L:Get- "\(" + "\("
> vfrStorageVarId[Info, VarIdStr, FALSE] {"\|" FLAGS "="
> numericVarStoreType [VarType] }- "\)"
> << + "\)" <<
> { i
> f (Info.mVarStoreId == 0)
> {
> // support Date/Time question@@ -4549,9 +4571,9 @@ getExp[UINT32 &
> RootLevel, UINT32 & ExpOpCount] :
>
> _PCATCH(VFR_RETURN_UNSUPPORTED, L->getLine(), "Get/Set opcode don't
> support data array");
> }
> }-
> CIfrGet GObj(L->getLine()); -
> _SAVE_OPHDR_COND (GObj, ($ExpOpCount == 0), L->getLine()); -
> GObj.SetVarInfo (&Info); + CIfrGet GObj(L->getLine());+
> _SAVE_OPHDR_COND (GObj, ($ExpOpCount == 0), L->getLine());+
> GObj.SetVarInfo (&Info); delete[] VarIdStr; $ExpOpCount++;
> }@@ -4608,7 +4630,7 @@ question23refExp[UINT32 & RootLevel,
> UINT32 & ExpOpCount] :
> { Uuid "=" guidDefinition[Guid] ","
> << Type = 0x3; >> }- vfrStatementExpressionSub[$RootLevel +
> 1, $ExpOpCount] + vfrStatementExpressionSub[$RootLevel + 1,
> $ExpOpCount] "\)"
> <<
> switch (Type) {@@ -4675,9 +4697,9 @@ setExp[UINT32 & RootLevel,
> UINT32 & ExpOpCount] :
> "\(" vfrStorageVarId[Info, VarIdStr, FALSE] {"\|" FLAG "="
> numericVarStoreType [VarType] }- ","
> vfrStatementExpressionSub[$RootLevel + 1, $ExpOpCount] + ","
> vfrStatementExpressionSub[$RootLevel + 1, $ExpOpCount] "\)"-
> << + <<
> { i
> f (Info.mVarStoreId == 0)
> {
> // support Date/Time question@@ -4724,8 +4746,8 @@ setExp[UINT32 &
> RootLevel, UINT32 & ExpOpCount] :
>
> _PCATCH(VFR_RETURN_UNSUPPORTED, L->getLine(), "Get/Set opcode don't
> support data array");
> }
> }-
> CIfrSet TSObj(L->getLine()); -
> TSObj.SetVarInfo (&Info); +
> CIfrSet TSObj(L->getLine());+
> TSObj.SetVarInfo (&Info);
> delete[] VarIdStr;
> $ExpOpCount++;
> }@@ -4808,9 +4830,9 @@ spanExp[UINT32 & RootLevel,
> UINT32 & ExpOpCount] :
> ; vfrExpressionMap [UINT32 & RootLevel, UINT32 & ExpOpCount]:-
> L:Map - "\("
> - vfrStatementExpressionSub[$RootLevel + 1, $ExpOpCount] + L:Map+
> "\("+ vfrStatementExpressionSub[$RootLevel + 1, $ExpOpCount] ":"
> << { CIfrMap MObj(L->getLine()); } >>
> ( vfrStatementExpression[0]@@ -4837,6 +4859,7 @@ spanFlags
> [UINT8 & Flags] :
> class EfiVfrParser { << private:+ BOOLEAN
> mIsCatchDefaultEnable; UINT8 mParserStatus;
> BOOLEAN mConstantOnlyInExpression; @@ -4880,6 +4903,7
> @@ public:
> VOID _PCATCH (IN EFI_VFR_RETURN_CODE, IN
> ANTLRTokenPtr); VOID _PCATCH (IN
> EFI_VFR_RETURN_CODE, IN UINT32); VOID _PCATCH
> (IN EFI_VFR_RETURN_CODE, IN UINT32, IN CONST CHAR8 *);+ VOID
> DefaultValueError (IN EFI_VFR_RETURN_CODE, IN UINT32); VOID
> syn (ANTLRAbstractToken *, ANTLRChar *, SetWordType *,
> ANTLRTokenType, INT32); @@ -4909,6 +4933,7 @@ public:
> VOID IdEqIdDoSpecial (IN UINT32 &, IN
> UINT32, IN EFI_QUESTION_ID, IN CHAR8 *, IN UINT32, IN EFI_QUESTION_ID,
> IN CHAR8 *, IN UINT32, IN EFI_COMPARE_TYPE); VOID
> IdEqListDoSpecial (IN UINT32 &, IN UINT32, IN EFI_QUESTION_ID, IN
> CHAR8 *, IN UINT32, IN UINT16, IN UINT16 *); VOID
> SetOverrideClassGuid (IN EFI_GUID *);+ VOID SetIsCatchDefaultEnable
> (BOOLEAN IsCatchDefaultEnable); >> } @@ -5086,6
> +5111,17 @@ EfiVfrParser::_PCATCH (
> mParserStatus = mParserStatus + gCVfrErrorHandle.HandleError
> (ReturnCode, LineNum, (CHAR8 *) ErrorMsg); }
> +VOID+EfiVfrParser::DefaultValueError (+ IN EFI_VFR_RETURN_CODE
> ReturnCode,+ IN UINT32 LineNum+ )+{+ CHAR8
> ErrorMsg[100];+ sprintf(ErrorMsg, "please remove the default value /
> defaultstore in line %d", LineNum);+ mParserStatus = mParserStatus +
> gCVfrErrorHandle.HandleError (ReturnCode, LineNum, ErrorMsg);+}+ VOID
> EfiVfrParser::syn ( ANTLRAbstractToken *Tok,@@ -5682,12 +5718,18
> @@ EfiVfrParser::IdEqListDoSpecial (
> } } -VOID +VOID EfiVfrParser::SetOverrideClassGuid (IN EFI_GUID
> *OverrideClassGuid) { mOverrideClassGuid = OverrideClassGuid; }
> +VOID+EfiVfrParser::SetIsCatchDefaultEnable (BOOLEAN
> IsCatchDefaultEnable)+{+ mIsCatchDefaultEnable =
> IsCatchDefaultEnable;+}+ VOID EfiVfrParser::CheckDuplicateDefaultValue
> ( IN EFI_DEFAULT_ID DefaultId,--
> 2.39.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#116679): https://edk2.groups.io/g/devel/message/116679
Mute This Topic: https://groups.io/mt/104886869/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2024-03-12 15:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-26 2:53 [edk2-devel] [Patch V3] BaseTools: VfrCompiler Adds DefaultValueError Yuting Yang
2024-03-08 10:00 ` Zhang, Zifeng
2024-03-08 14:47 ` [edk2-devel] 回复: " gaoliming via groups.io
2024-03-11 2:27 ` Zhang, Zifeng [this message]
2024-03-08 14:30 ` gaoliming via groups.io
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=SN6PR11MB2815C06C6CE210AA0DD7F16E82242@SN6PR11MB2815.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox