Re: TPM 2.0 Manufacutre ID wrong byte order

["Lin, Derek (HPS UEFI Dev)" <derek.lin2@hpe.com>]

Hi Chao B,

I think you are right, the Manufacture ID is a byte array. The order in ACPI HID is correct.

But Tpm2GetCapabilityManufactureID return a UINT32 value.
EFI_STATUS
EFIAPI
Tpm2GetCapabilityManufactureID (
  OUT     UINT32                    *ManufactureId
  )


This is confused . When the caller use ManufactureId as UINT32, the byte order is confused.
For example in Tcg2Dxe.c, it print:
Tpm2GetCapabilityManufactureID - 204D5453

Which should be "53544D20" in the case.

  Status = Tpm2GetCapabilityManufactureID (&mTcgDxeData.BsCap.ManufacturerID);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "Tpm2GetCapabilityManufactureID fail!\n"));
  } else {
    DEBUG ((EFI_D_INFO, "Tpm2GetCapabilityManufactureID - %08x\n", mTcgDxeData.BsCap.ManufacturerID));
  }

How about changing the returning value to a 4 bytes array?

Thanks,
Derek

From: Zhang, Chao B [mailto:chao.b.zhang@intel.com]
Sent: Friday, February 23, 2018 11:03 AM
To: Lin, Derek (HPS UEFI Dev) <derek.lin2@hpe.com>; edk2-devel@lists.01.org
Cc: Yao, Jiewen <jiewen.yao@intel.com>; Zeng, Star <star.zeng@intel.com>
Subject: RE: TPM 2.0 Manufacutre ID wrong byte order

Hi Derek:
    Can you specify the "reversed" ManufactureId issue?  What did you get from this interface?
The implementation follows Vendor ID registry spec. The vendor ID is octet array. There is no endian issue here.
We haven't seen any disorder before.


From: Lin, Derek (HPS UEFI Dev) [mailto:derek.lin2@hpe.com]
Sent: Thursday, February 22, 2018 7:25 PM
To: edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>; Zhang, Chao B <chao.b.zhang@intel.com<mailto:chao.b.zhang@intel.com>>
Cc: Yao, Jiewen <jiewen.yao@intel.com<mailto:jiewen.yao@intel.com>>; Zeng, Star <star.zeng@intel.com<mailto:star.zeng@intel.com>>
Subject: TPM 2.0 Manufacutre ID wrong byte order

Hi TPM expert,

The line in https://github.com/tianocore/edk2/commit/73126ac2bd9804632255b2fddd4d7633537c9620#diff-76abe1c1ebf05982ed72eaf56f489029R192 change the byte order of Manufacture ID in Tpm2GetCapabilityManufactureID ().

I see it return "reversed" ManufactureId for two TPM vendor's module.
Also, all other Capability data in Tpm2Capability.c use SwapBytes32 since TPM is big-endian, which seems correct.

Can you check this and confirm?

Thanks,
Derek