Hi All, My team is trying to boot on a custom board based on Xeon D-1700. We must boot using network, in particular using the internal E823-L network device. At the moment we are using the Best Known Configuration file provided by Intel, Stitched with Slimbootloader, that launches EDK2 as Payload. EDK2 then should use Netboot to allow us to boot the OS via network. At this stage we are facing issues: Netboot seems not capable of recognizing the E823-L as an option for boot. I read on this site that an UNDI driver should be added to EDK2, am I right? If so, how is this done? I could not understand it from previous questions asked here. If any other step is required, please say so. The same goes for anything that I misinterpreted. Thanks -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#121426): https://edk2.groups.io/g/devel/message/121426 Mute This Topic: https://groups.io/mt/113730673/7686176 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io] -=-=-=-=-=-=-=-=-=-=-=-