* [PATCH 01/11] OvmfPkg: clone NorFlashPlatformLib into VirtNorFlashPlatformLib
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 02/11] OvmfPkg/VirtNorFlashDxe: clone ArmPlatformPkg's NOR flash driver Ard Biesheuvel
` (11 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
Create a new library class in Ovmf that duplicates the existing
NorFlashPlatformLib, but which will be tied to the VirtNorFlashDxe
driver that will be introduced in a subsequent patch. This allows us to
retire the original from ArmPlatformPkg.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/Include/Library/VirtNorFlashPlatformLib.h | 30 ++++++++++++++++++++
OvmfPkg/OvmfPkg.dec | 4 +++
2 files changed, 34 insertions(+)
diff --git a/OvmfPkg/Include/Library/VirtNorFlashPlatformLib.h b/OvmfPkg/Include/Library/VirtNorFlashPlatformLib.h
new file mode 100644
index 000000000000..d2128a032714
--- /dev/null
+++ b/OvmfPkg/Include/Library/VirtNorFlashPlatformLib.h
@@ -0,0 +1,30 @@
+/** @file
+
+ Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ **/
+
+#ifndef _VIRTNORFLASHPLATFORMLIB_H_
+#define _VIRTNORFLASHPLATFORMLIB_H_
+
+typedef struct {
+ UINTN DeviceBaseAddress; // Start address of the Device Base Address (DBA)
+ UINTN RegionBaseAddress; // Start address of one single region
+ UINTN Size;
+ UINTN BlockSize;
+} VIRT_NOR_FLASH_DESCRIPTION;
+
+EFI_STATUS
+VirtNorFlashPlatformInitialization (
+ VOID
+ );
+
+EFI_STATUS
+VirtNorFlashPlatformGetDevices (
+ OUT VIRT_NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
+ OUT UINT32 *Count
+ );
+
+#endif /* _VIRTNORFLASHPLATFORMLIB_H_ */
diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index f13dd4a61f01..5f5556c67c6c 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -101,6 +101,10 @@ [LibraryClasses]
# transports.
VirtioMmioDeviceLib|Include/Library/VirtioMmioDeviceLib.h
+ ## @libraryclass Provides a Nor flash interface.
+ #
+ VirtNorFlashPlatformLib|Include/Library/VirtNorFlashPlatformLib.h
+
## @libraryclass Invoke Xen hypercalls
#
XenHypercallLib|Include/Library/XenHypercallLib.h
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 02/11] OvmfPkg/VirtNorFlashDxe: clone ArmPlatformPkg's NOR flash driver
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 01/11] OvmfPkg: clone NorFlashPlatformLib into VirtNorFlashPlatformLib Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 03/11] OvmfPkg/VirtNorFlashDxe: remove CheckBlockLocked feature Ard Biesheuvel
` (10 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
QEMU's mach-virt is loosely based on ARM Versatile Express, and inherits
its NOR flash driver, which is now being used on other QEMU emulated
architectures as well.
In order to permit ourselves the freedom to optimize this driver for
use under KVM emulation, let's clone it into OvmfPkg, so we have a
version we can hack without the risk of regressing bare metal platforms.
The cloned version is mostly identical to the original, but it depends
on the newly added VirtNorFlashPlatformLib library class instead of the
original one from ArmPlatformPkg. Beyond that, only cosmetic changes
related to #include order etc were made.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c | 991 ++++++++++++++++++++
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h | 422 +++++++++
OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c | 123 +++
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c | 506 ++++++++++
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf | 72 ++
OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c | 777 +++++++++++++++
6 files changed, 2891 insertions(+)
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
new file mode 100644
index 000000000000..12fa720dad84
--- /dev/null
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
@@ -0,0 +1,991 @@
+/** @file NorFlash.c
+
+ Copyright (c) 2011 - 2020, Arm Limited. All rights reserved.<BR>
+ Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseMemoryLib.h>
+
+#include "VirtNorFlash.h"
+
+//
+// Global variable declarations
+//
+extern NOR_FLASH_INSTANCE **mNorFlashInstances;
+extern UINT32 mNorFlashDeviceCount;
+
+UINT32
+NorFlashReadStatusRegister (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN SR_Address
+ )
+{
+ // Prepare to read the status register
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_STATUS_REGISTER);
+ return MmioRead32 (Instance->DeviceBaseAddress);
+}
+
+STATIC
+BOOLEAN
+NorFlashBlockIsLocked (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ )
+{
+ UINT32 LockStatus;
+
+ // Send command for reading device id
+ SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
+
+ // Read block lock status
+ LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
+
+ // Decode block lock status
+ LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
+
+ if ((LockStatus & 0x2) != 0) {
+ DEBUG ((DEBUG_ERROR, "NorFlashBlockIsLocked: WARNING: Block LOCKED DOWN\n"));
+ }
+
+ return ((LockStatus & 0x1) != 0);
+}
+
+STATIC
+EFI_STATUS
+NorFlashUnlockSingleBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ )
+{
+ UINT32 LockStatus;
+
+ // Raise the Task Priority Level to TPL_NOTIFY to serialise all its operations
+ // and to protect shared data structures.
+
+ if (FeaturePcdGet (PcdNorFlashCheckBlockLocked) == TRUE) {
+ do {
+ // Request a lock setup
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
+
+ // Request an unlock
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
+
+ // Send command for reading device id
+ SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
+
+ // Read block lock status
+ LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
+
+ // Decode block lock status
+ LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
+ } while ((LockStatus & 0x1) == 1);
+ } else {
+ // Request a lock setup
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
+
+ // Request an unlock
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
+
+ // Wait until the status register gives us the all clear
+ do {
+ LockStatus = NorFlashReadStatusRegister (Instance, BlockAddress);
+ } while ((LockStatus & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
+ }
+
+ // Put device back into Read Array mode
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_READ_ARRAY);
+
+ DEBUG ((DEBUG_BLKIO, "UnlockSingleBlock: BlockAddress=0x%08x\n", BlockAddress));
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+NorFlashUnlockSingleBlockIfNecessary (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ )
+{
+ EFI_STATUS Status;
+
+ Status = EFI_SUCCESS;
+
+ if (NorFlashBlockIsLocked (Instance, BlockAddress)) {
+ Status = NorFlashUnlockSingleBlock (Instance, BlockAddress);
+ }
+
+ return Status;
+}
+
+/**
+ * The following function presumes that the block has already been unlocked.
+ **/
+EFI_STATUS
+NorFlashEraseSingleBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ )
+{
+ EFI_STATUS Status;
+ UINT32 StatusRegister;
+
+ Status = EFI_SUCCESS;
+
+ // Request a block erase and then confirm it
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_SETUP);
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_CONFIRM);
+
+ // Wait until the status register gives us the all clear
+ do {
+ StatusRegister = NorFlashReadStatusRegister (Instance, BlockAddress);
+ } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
+
+ if (StatusRegister & P30_SR_BIT_VPP) {
+ DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: VPP Range Error\n", BlockAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if ((StatusRegister & (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) == (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) {
+ DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Command Sequence Error\n", BlockAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (StatusRegister & P30_SR_BIT_ERASE) {
+ DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Erase Error StatusRegister:0x%X\n", BlockAddress, StatusRegister));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
+ // The debug level message has been reduced because a device lock might happen. In this case we just retry it ...
+ DEBUG ((DEBUG_INFO, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error\n", BlockAddress));
+ Status = EFI_WRITE_PROTECTED;
+ }
+
+ if (EFI_ERROR (Status)) {
+ // Clear the Status Register
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
+ }
+
+ // Put device back into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+
+ return Status;
+}
+
+EFI_STATUS
+NorFlashWriteSingleWord (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN WordAddress,
+ IN UINT32 WriteData
+ )
+{
+ EFI_STATUS Status;
+ UINT32 StatusRegister;
+
+ Status = EFI_SUCCESS;
+
+ // Request a write single word command
+ SEND_NOR_COMMAND (WordAddress, 0, P30_CMD_WORD_PROGRAM_SETUP);
+
+ // Store the word into NOR Flash;
+ MmioWrite32 (WordAddress, WriteData);
+
+ // Wait for the write to complete and then check for any errors; i.e. check the Status Register
+ do {
+ // Prepare to read the status register
+ StatusRegister = NorFlashReadStatusRegister (Instance, WordAddress);
+ // The chip is busy while the WRITE bit is not asserted
+ } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
+
+ // Perform a full status check:
+ // Mask the relevant bits of Status Register.
+ // Everything should be zero, if not, we have a problem
+
+ if (StatusRegister & P30_SR_BIT_VPP) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): VPP Range Error\n", WordAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (StatusRegister & P30_SR_BIT_PROGRAM) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Program Error\n", WordAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Device Protect Error\n", WordAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (!EFI_ERROR (Status)) {
+ // Clear the Status Register
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
+ }
+
+ // Put device back into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+
+ return Status;
+}
+
+/*
+ * Writes data to the NOR Flash using the Buffered Programming method.
+ *
+ * The maximum size of the on-chip buffer is 32-words, because of hardware restrictions.
+ * Therefore this function will only handle buffers up to 32 words or 128 bytes.
+ * To deal with larger buffers, call this function again.
+ *
+ * This function presumes that both the TargetAddress and the TargetAddress+BufferSize
+ * exist entirely within the NOR Flash. Therefore these conditions will not be checked here.
+ *
+ * In buffered programming, if the target address not at the beginning of a 32-bit word boundary,
+ * then programming time is doubled and power consumption is increased.
+ * Therefore, it is a requirement to align buffer writes to 32-bit word boundaries.
+ * i.e. the last 4 bits of the target start address must be zero: 0x......00
+ */
+EFI_STATUS
+NorFlashWriteBuffer (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN TargetAddress,
+ IN UINTN BufferSizeInBytes,
+ IN UINT32 *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN BufferSizeInWords;
+ UINTN Count;
+ volatile UINT32 *Data;
+ UINTN WaitForBuffer;
+ BOOLEAN BufferAvailable;
+ UINT32 StatusRegister;
+
+ WaitForBuffer = MAX_BUFFERED_PROG_ITERATIONS;
+ BufferAvailable = FALSE;
+
+ // Check that the target address does not cross a 32-word boundary.
+ if ((TargetAddress & BOUNDARY_OF_32_WORDS) != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Check there are some data to program
+ if (BufferSizeInBytes == 0) {
+ return EFI_BUFFER_TOO_SMALL;
+ }
+
+ // Check that the buffer size does not exceed the maximum hardware buffer size on chip.
+ if (BufferSizeInBytes > P30_MAX_BUFFER_SIZE_IN_BYTES) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // Check that the buffer size is a multiple of 32-bit words
+ if ((BufferSizeInBytes % 4) != 0) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // Pre-programming conditions checked, now start the algorithm.
+
+ // Prepare the data destination address
+ Data = (UINT32 *)TargetAddress;
+
+ // Check the availability of the buffer
+ do {
+ // Issue the Buffered Program Setup command
+ SEND_NOR_COMMAND (TargetAddress, 0, P30_CMD_BUFFERED_PROGRAM_SETUP);
+
+ // Read back the status register bit#7 from the same address
+ if (((*Data) & P30_SR_BIT_WRITE) == P30_SR_BIT_WRITE) {
+ BufferAvailable = TRUE;
+ }
+
+ // Update the loop counter
+ WaitForBuffer--;
+ } while ((WaitForBuffer > 0) && (BufferAvailable == FALSE));
+
+ // The buffer was not available for writing
+ if (WaitForBuffer == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto EXIT;
+ }
+
+ // From now on we work in 32-bit words
+ BufferSizeInWords = BufferSizeInBytes / (UINTN)4;
+
+ // Write the word count, which is (buffer_size_in_words - 1),
+ // because word count 0 means one word.
+ SEND_NOR_COMMAND (TargetAddress, 0, (BufferSizeInWords - 1));
+
+ // Write the data to the NOR Flash, advancing each address by 4 bytes
+ for (Count = 0; Count < BufferSizeInWords; Count++, Data++, Buffer++) {
+ MmioWrite32 ((UINTN)Data, *Buffer);
+ }
+
+ // Issue the Buffered Program Confirm command, to start the programming operation
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_BUFFERED_PROGRAM_CONFIRM);
+
+ // Wait for the write to complete and then check for any errors; i.e. check the Status Register
+ do {
+ StatusRegister = NorFlashReadStatusRegister (Instance, TargetAddress);
+ // The chip is busy while the WRITE bit is not asserted
+ } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
+
+ // Perform a full status check:
+ // Mask the relevant bits of Status Register.
+ // Everything should be zero, if not, we have a problem
+
+ Status = EFI_SUCCESS;
+
+ if (StatusRegister & P30_SR_BIT_VPP) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): VPP Range Error\n", TargetAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (StatusRegister & P30_SR_BIT_PROGRAM) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Program Error\n", TargetAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Device Protect Error\n", TargetAddress));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (!EFI_ERROR (Status)) {
+ // Clear the Status Register
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
+ }
+
+EXIT:
+ // Put device back into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+
+ return Status;
+}
+
+EFI_STATUS
+NorFlashWriteBlocks (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ IN VOID *Buffer
+ )
+{
+ UINT32 *pWriteBuffer;
+ EFI_STATUS Status;
+ EFI_LBA CurrentBlock;
+ UINT32 BlockSizeInWords;
+ UINT32 NumBlocks;
+ UINT32 BlockCount;
+
+ Status = EFI_SUCCESS;
+
+ // The buffer must be valid
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Instance->Media.ReadOnly == TRUE) {
+ return EFI_WRITE_PROTECTED;
+ }
+
+ // We must have some bytes to read
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BufferSizeInBytes=0x%x\n", BufferSizeInBytes));
+ if (BufferSizeInBytes == 0) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // The size of the buffer must be a multiple of the block size
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BlockSize in bytes =0x%x\n", Instance->Media.BlockSize));
+ if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // All blocks must be within the device
+ NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: NumBlocks=%d, LastBlock=%ld, Lba=%ld.\n", NumBlocks, Instance->Media.LastBlock, Lba));
+
+ if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteBlocks: ERROR - Write will exceed last block.\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ BlockSizeInWords = Instance->Media.BlockSize / 4;
+
+ // Because the target *Buffer is a pointer to VOID, we must put all the data into a pointer
+ // to a proper data type, so use *ReadBuffer
+ pWriteBuffer = (UINT32 *)Buffer;
+
+ CurrentBlock = Lba;
+ for (BlockCount = 0; BlockCount < NumBlocks; BlockCount++, CurrentBlock++, pWriteBuffer = pWriteBuffer + BlockSizeInWords) {
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Writing block #%d\n", (UINTN)CurrentBlock));
+
+ Status = NorFlashWriteFullBlock (Instance, CurrentBlock, pWriteBuffer, BlockSizeInWords);
+
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+ }
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Exit Status = \"%r\".\n", Status));
+ return Status;
+}
+
+#define BOTH_ALIGNED(a, b, align) ((((UINTN)(a) | (UINTN)(b)) & ((align) - 1)) == 0)
+
+/**
+ Copy Length bytes from Source to Destination, using aligned accesses only.
+ Note that this implementation uses memcpy() semantics rather then memmove()
+ semantics, i.e., SourceBuffer and DestinationBuffer should not overlap.
+
+ @param DestinationBuffer The target of the copy request.
+ @param SourceBuffer The place to copy from.
+ @param Length The number of bytes to copy.
+
+ @return Destination
+
+**/
+STATIC
+VOID *
+AlignedCopyMem (
+ OUT VOID *DestinationBuffer,
+ IN CONST VOID *SourceBuffer,
+ IN UINTN Length
+ )
+{
+ UINT8 *Destination8;
+ CONST UINT8 *Source8;
+ UINT32 *Destination32;
+ CONST UINT32 *Source32;
+ UINT64 *Destination64;
+ CONST UINT64 *Source64;
+
+ if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 8) && (Length >= 8)) {
+ Destination64 = DestinationBuffer;
+ Source64 = SourceBuffer;
+ while (Length >= 8) {
+ *Destination64++ = *Source64++;
+ Length -= 8;
+ }
+
+ Destination8 = (UINT8 *)Destination64;
+ Source8 = (CONST UINT8 *)Source64;
+ } else if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 4) && (Length >= 4)) {
+ Destination32 = DestinationBuffer;
+ Source32 = SourceBuffer;
+ while (Length >= 4) {
+ *Destination32++ = *Source32++;
+ Length -= 4;
+ }
+
+ Destination8 = (UINT8 *)Destination32;
+ Source8 = (CONST UINT8 *)Source32;
+ } else {
+ Destination8 = DestinationBuffer;
+ Source8 = SourceBuffer;
+ }
+
+ while (Length-- != 0) {
+ *Destination8++ = *Source8++;
+ }
+
+ return DestinationBuffer;
+}
+
+EFI_STATUS
+NorFlashReadBlocks (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ OUT VOID *Buffer
+ )
+{
+ UINT32 NumBlocks;
+ UINTN StartAddress;
+
+ DEBUG ((
+ DEBUG_BLKIO,
+ "NorFlashReadBlocks: BufferSize=0x%xB BlockSize=0x%xB LastBlock=%ld, Lba=%ld.\n",
+ BufferSizeInBytes,
+ Instance->Media.BlockSize,
+ Instance->Media.LastBlock,
+ Lba
+ ));
+
+ // The buffer must be valid
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Return if we have not any byte to read
+ if (BufferSizeInBytes == 0) {
+ return EFI_SUCCESS;
+ }
+
+ // The size of the buffer must be a multiple of the block size
+ if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // All blocks must be within the device
+ NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
+
+ if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
+ DEBUG ((DEBUG_ERROR, "NorFlashReadBlocks: ERROR - Read will exceed last block\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Get the address to start reading from
+ StartAddress = GET_NOR_BLOCK_ADDRESS (
+ Instance->RegionBaseAddress,
+ Lba,
+ Instance->Media.BlockSize
+ );
+
+ // Put the device into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+
+ // Readout the data
+ AlignedCopyMem (Buffer, (VOID *)StartAddress, BufferSizeInBytes);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+NorFlashRead (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN UINTN BufferSizeInBytes,
+ OUT VOID *Buffer
+ )
+{
+ UINTN StartAddress;
+
+ // The buffer must be valid
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Return if we have not any byte to read
+ if (BufferSizeInBytes == 0) {
+ return EFI_SUCCESS;
+ }
+
+ if (((Lba * Instance->Media.BlockSize) + Offset + BufferSizeInBytes) > Instance->Size) {
+ DEBUG ((DEBUG_ERROR, "NorFlashRead: ERROR - Read will exceed device size.\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Get the address to start reading from
+ StartAddress = GET_NOR_BLOCK_ADDRESS (
+ Instance->RegionBaseAddress,
+ Lba,
+ Instance->Media.BlockSize
+ );
+
+ // Put the device into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+
+ // Readout the data
+ AlignedCopyMem (Buffer, (VOID *)(StartAddress + Offset), BufferSizeInBytes);
+
+ return EFI_SUCCESS;
+}
+
+/*
+ Write a full or portion of a block. It must not span block boundaries; that is,
+ Offset + *NumBytes <= Instance->Media.BlockSize.
+*/
+EFI_STATUS
+NorFlashWriteSingleBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+{
+ EFI_STATUS TempStatus;
+ UINT32 Tmp;
+ UINT32 TmpBuf;
+ UINT32 WordToWrite;
+ UINT32 Mask;
+ BOOLEAN DoErase;
+ UINTN BytesToWrite;
+ UINTN CurOffset;
+ UINTN WordAddr;
+ UINTN BlockSize;
+ UINTN BlockAddress;
+ UINTN PrevBlockAddress;
+
+ PrevBlockAddress = 0;
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteSingleBlock(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Lba, Offset, *NumBytes, Buffer));
+
+ // Detect WriteDisabled state
+ if (Instance->Media.ReadOnly == TRUE) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - Can not write: Device is in WriteDisabled state.\n"));
+ // It is in WriteDisabled state, return an error right away
+ return EFI_ACCESS_DENIED;
+ }
+
+ // Cache the block size to avoid de-referencing pointers all the time
+ BlockSize = Instance->Media.BlockSize;
+
+ // The write must not span block boundaries.
+ // We need to check each variable individually because adding two large values together overflows.
+ if ((Offset >= BlockSize) ||
+ (*NumBytes > BlockSize) ||
+ ((Offset + *NumBytes) > BlockSize))
+ {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // We must have some bytes to write
+ if (*NumBytes == 0) {
+ DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // Pick 128bytes as a good start for word operations as opposed to erasing the
+ // block and writing the data regardless if an erase is really needed.
+ // It looks like most individual NV variable writes are smaller than 128bytes.
+ if (*NumBytes <= 128) {
+ // Check to see if we need to erase before programming the data into NOR.
+ // If the destination bits are only changing from 1s to 0s we can just write.
+ // After a block is erased all bits in the block is set to 1.
+ // If any byte requires us to erase we just give up and rewrite all of it.
+ DoErase = FALSE;
+ BytesToWrite = *NumBytes;
+ CurOffset = Offset;
+
+ while (BytesToWrite > 0) {
+ // Read full word from NOR, splice as required. A word is the smallest
+ // unit we can write.
+ TempStatus = NorFlashRead (Instance, Lba, CurOffset & ~(0x3), sizeof (Tmp), &Tmp);
+ if (EFI_ERROR (TempStatus)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ // Physical address of word in NOR to write.
+ WordAddr = (CurOffset & ~(0x3)) + GET_NOR_BLOCK_ADDRESS (
+ Instance->RegionBaseAddress,
+ Lba,
+ BlockSize
+ );
+ // The word of data that is to be written.
+ TmpBuf = *((UINT32 *)(Buffer + (*NumBytes - BytesToWrite)));
+
+ // First do word aligned chunks.
+ if ((CurOffset & 0x3) == 0) {
+ if (BytesToWrite >= 4) {
+ // Is the destination still in 'erased' state?
+ if (~Tmp != 0) {
+ // Check to see if we are only changing bits to zero.
+ if ((Tmp ^ TmpBuf) & TmpBuf) {
+ DoErase = TRUE;
+ break;
+ }
+ }
+
+ // Write this word to NOR
+ WordToWrite = TmpBuf;
+ CurOffset += sizeof (TmpBuf);
+ BytesToWrite -= sizeof (TmpBuf);
+ } else {
+ // BytesToWrite < 4. Do small writes and left-overs
+ Mask = ~((~0) << (BytesToWrite * 8));
+ // Mask out the bytes we want.
+ TmpBuf &= Mask;
+ // Is the destination still in 'erased' state?
+ if ((Tmp & Mask) != Mask) {
+ // Check to see if we are only changing bits to zero.
+ if ((Tmp ^ TmpBuf) & TmpBuf) {
+ DoErase = TRUE;
+ break;
+ }
+ }
+
+ // Merge old and new data. Write merged word to NOR
+ WordToWrite = (Tmp & ~Mask) | TmpBuf;
+ CurOffset += BytesToWrite;
+ BytesToWrite = 0;
+ }
+ } else {
+ // Do multiple words, but starting unaligned.
+ if (BytesToWrite > (4 - (CurOffset & 0x3))) {
+ Mask = ((~0) << ((CurOffset & 0x3) * 8));
+ // Mask out the bytes we want.
+ TmpBuf &= Mask;
+ // Is the destination still in 'erased' state?
+ if ((Tmp & Mask) != Mask) {
+ // Check to see if we are only changing bits to zero.
+ if ((Tmp ^ TmpBuf) & TmpBuf) {
+ DoErase = TRUE;
+ break;
+ }
+ }
+
+ // Merge old and new data. Write merged word to NOR
+ WordToWrite = (Tmp & ~Mask) | TmpBuf;
+ BytesToWrite -= (4 - (CurOffset & 0x3));
+ CurOffset += (4 - (CurOffset & 0x3));
+ } else {
+ // Unaligned and fits in one word.
+ Mask = (~((~0) << (BytesToWrite * 8))) << ((CurOffset & 0x3) * 8);
+ // Mask out the bytes we want.
+ TmpBuf = (TmpBuf << ((CurOffset & 0x3) * 8)) & Mask;
+ // Is the destination still in 'erased' state?
+ if ((Tmp & Mask) != Mask) {
+ // Check to see if we are only changing bits to zero.
+ if ((Tmp ^ TmpBuf) & TmpBuf) {
+ DoErase = TRUE;
+ break;
+ }
+ }
+
+ // Merge old and new data. Write merged word to NOR
+ WordToWrite = (Tmp & ~Mask) | TmpBuf;
+ CurOffset += BytesToWrite;
+ BytesToWrite = 0;
+ }
+ }
+
+ //
+ // Write the word to NOR.
+ //
+
+ BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSize);
+ if (BlockAddress != PrevBlockAddress) {
+ TempStatus = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
+ if (EFI_ERROR (TempStatus)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ PrevBlockAddress = BlockAddress;
+ }
+
+ TempStatus = NorFlashWriteSingleWord (Instance, WordAddr, WordToWrite);
+ if (EFI_ERROR (TempStatus)) {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ // Exit if we got here and could write all the data. Otherwise do the
+ // Erase-Write cycle.
+ if (!DoErase) {
+ return EFI_SUCCESS;
+ }
+ }
+
+ // Check we did get some memory. Buffer is BlockSize.
+ if (Instance->ShadowBuffer == NULL) {
+ DEBUG ((DEBUG_ERROR, "FvbWrite: ERROR - Buffer not ready\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
+ // Read NOR Flash data into shadow buffer
+ TempStatus = NorFlashReadBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
+ if (EFI_ERROR (TempStatus)) {
+ // Return one of the pre-approved error statuses
+ return EFI_DEVICE_ERROR;
+ }
+
+ // Put the data at the appropriate location inside the buffer area
+ CopyMem ((VOID *)((UINTN)Instance->ShadowBuffer + Offset), Buffer, *NumBytes);
+
+ // Write the modified buffer back to the NorFlash
+ TempStatus = NorFlashWriteBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
+ if (EFI_ERROR (TempStatus)) {
+ // Return one of the pre-approved error statuses
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/*
+ Although DiskIoDxe will automatically install the DiskIO protocol whenever
+ we install the BlockIO protocol, its implementation is sub-optimal as it reads
+ and writes entire blocks using the BlockIO protocol. In fact we can access
+ NOR flash with a finer granularity than that, so we can improve performance
+ by directly producing the DiskIO protocol.
+*/
+
+/**
+ Read BufferSize bytes from Offset into Buffer.
+
+ @param This Protocol instance pointer.
+ @param MediaId Id of the media, changes every time the media is replaced.
+ @param Offset The starting byte offset to read from
+ @param BufferSize Size of Buffer
+ @param Buffer Buffer containing read data
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
+ @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
+ valid for the device.
+
+**/
+EFI_STATUS
+EFIAPI
+NorFlashDiskIoReadDisk (
+ IN EFI_DISK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 DiskOffset,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+ UINT32 BlockSize;
+ UINT32 BlockOffset;
+ EFI_LBA Lba;
+
+ Instance = INSTANCE_FROM_DISKIO_THIS (This);
+
+ if (MediaId != Instance->Media.MediaId) {
+ return EFI_MEDIA_CHANGED;
+ }
+
+ BlockSize = Instance->Media.BlockSize;
+ Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
+
+ return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
+}
+
+/**
+ Writes a specified number of bytes to a device.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to be written.
+ @param Offset The starting byte offset on the logical block I/O device to write.
+ @param BufferSize The size in bytes of Buffer. The number of bytes to write to the device.
+ @param Buffer A pointer to the buffer containing the data to be written.
+
+ @retval EFI_SUCCESS The data was written correctly to the device.
+ @retval EFI_WRITE_PROTECTED The device can not be written to.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
+ @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not
+ valid for the device.
+
+**/
+EFI_STATUS
+EFIAPI
+NorFlashDiskIoWriteDisk (
+ IN EFI_DISK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 DiskOffset,
+ IN UINTN BufferSize,
+ IN VOID *Buffer
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+ UINT32 BlockSize;
+ UINT32 BlockOffset;
+ EFI_LBA Lba;
+ UINTN RemainingBytes;
+ UINTN WriteSize;
+ EFI_STATUS Status;
+
+ Instance = INSTANCE_FROM_DISKIO_THIS (This);
+
+ if (MediaId != Instance->Media.MediaId) {
+ return EFI_MEDIA_CHANGED;
+ }
+
+ BlockSize = Instance->Media.BlockSize;
+ Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
+
+ RemainingBytes = BufferSize;
+
+ // Write either all the remaining bytes, or the number of bytes that bring
+ // us up to a block boundary, whichever is less.
+ // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
+ // block boundary (even if it is already on one).
+ WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset);
+
+ do {
+ if (WriteSize == BlockSize) {
+ // Write a full block
+ Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32));
+ } else {
+ // Write a partial block
+ Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer);
+ }
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Now continue writing either all the remaining bytes or single blocks.
+ RemainingBytes -= WriteSize;
+ Buffer = (UINT8 *)Buffer + WriteSize;
+ Lba++;
+ BlockOffset = 0;
+ WriteSize = MIN (RemainingBytes, BlockSize);
+ } while (RemainingBytes);
+
+ return Status;
+}
+
+EFI_STATUS
+NorFlashReset (
+ IN NOR_FLASH_INSTANCE *Instance
+ )
+{
+ // As there is no specific RESET to perform, ensure that the devices is in the default Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+ return EFI_SUCCESS;
+}
+
+/**
+ Fixup internal data so that EFI can be call in virtual mode.
+ Call the passed in Child Notify event and convert any pointers in
+ lib to virtual mode.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+VOID
+EFIAPI
+NorFlashVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->DeviceBaseAddress);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->RegionBaseAddress);
+
+ // Convert BlockIo protocol
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.FlushBlocks);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.ReadBlocks);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.Reset);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.WriteBlocks);
+
+ // Convert Fvb
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.EraseBlocks);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetAttributes);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetBlockSize);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetPhysicalAddress);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Read);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.SetAttributes);
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Write);
+
+ if (mNorFlashInstances[Index]->ShadowBuffer != NULL) {
+ EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->ShadowBuffer);
+ }
+ }
+
+ return;
+}
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
new file mode 100644
index 000000000000..c1e5f2ca3131
--- /dev/null
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
@@ -0,0 +1,422 @@
+/** @file NorFlash.h
+
+ Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __NOR_FLASH_H__
+#define __NOR_FLASH_H__
+
+#include <Base.h>
+#include <PiDxe.h>
+
+#include <Guid/EventGroup.h>
+
+#include <Protocol/BlockIo.h>
+#include <Protocol/DiskIo.h>
+#include <Protocol/FirmwareVolumeBlock.h>
+
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Library/VirtNorFlashPlatformLib.h>
+
+#define NOR_FLASH_ERASE_RETRY 10
+
+// Device access macros
+// These are necessary because we use 2 x 16bit parts to make up 32bit data
+
+#define HIGH_16_BITS 0xFFFF0000
+#define LOW_16_BITS 0x0000FFFF
+#define LOW_8_BITS 0x000000FF
+
+#define FOLD_32BIT_INTO_16BIT(value) ( ( value >> 16 ) | ( value & LOW_16_BITS ) )
+
+#define GET_LOW_BYTE(value) ( value & LOW_8_BITS )
+#define GET_HIGH_BYTE(value) ( GET_LOW_BYTE( value >> 16 ) )
+
+// Each command must be sent simultaneously to both chips,
+// i.e. at the lower 16 bits AND at the higher 16 bits
+#define CREATE_NOR_ADDRESS(BaseAddr, OffsetAddr) ((BaseAddr) + ((OffsetAddr) << 2))
+#define CREATE_DUAL_CMD(Cmd) ( ( Cmd << 16) | ( Cmd & LOW_16_BITS) )
+#define SEND_NOR_COMMAND(BaseAddr, Offset, Cmd) MmioWrite32 (CREATE_NOR_ADDRESS(BaseAddr,Offset), CREATE_DUAL_CMD(Cmd))
+#define GET_NOR_BLOCK_ADDRESS(BaseAddr, Lba, LbaSize) ( BaseAddr + (UINTN)((Lba) * LbaSize) )
+
+// Status Register Bits
+#define P30_SR_BIT_WRITE (BIT7 << 16 | BIT7)
+#define P30_SR_BIT_ERASE_SUSPEND (BIT6 << 16 | BIT6)
+#define P30_SR_BIT_ERASE (BIT5 << 16 | BIT5)
+#define P30_SR_BIT_PROGRAM (BIT4 << 16 | BIT4)
+#define P30_SR_BIT_VPP (BIT3 << 16 | BIT3)
+#define P30_SR_BIT_PROGRAM_SUSPEND (BIT2 << 16 | BIT2)
+#define P30_SR_BIT_BLOCK_LOCKED (BIT1 << 16 | BIT1)
+#define P30_SR_BIT_BEFP (BIT0 << 16 | BIT0)
+
+// Device Commands for Intel StrataFlash(R) Embedded Memory (P30) Family
+
+// On chip buffer size for buffered programming operations
+// There are 2 chips, each chip can buffer up to 32 (16-bit)words, and each word is 2 bytes.
+// Therefore the total size of the buffer is 2 x 32 x 2 = 128 bytes
+#define P30_MAX_BUFFER_SIZE_IN_BYTES ((UINTN)128)
+#define P30_MAX_BUFFER_SIZE_IN_WORDS (P30_MAX_BUFFER_SIZE_IN_BYTES/((UINTN)4))
+#define MAX_BUFFERED_PROG_ITERATIONS 10000000
+#define BOUNDARY_OF_32_WORDS 0x7F
+
+// CFI Addresses
+#define P30_CFI_ADDR_QUERY_UNIQUE_QRY 0x10
+#define P30_CFI_ADDR_VENDOR_ID 0x13
+
+// CFI Data
+#define CFI_QRY 0x00595251
+
+// READ Commands
+#define P30_CMD_READ_DEVICE_ID 0x0090
+#define P30_CMD_READ_STATUS_REGISTER 0x0070
+#define P30_CMD_CLEAR_STATUS_REGISTER 0x0050
+#define P30_CMD_READ_ARRAY 0x00FF
+#define P30_CMD_READ_CFI_QUERY 0x0098
+
+// WRITE Commands
+#define P30_CMD_WORD_PROGRAM_SETUP 0x0040
+#define P30_CMD_ALTERNATE_WORD_PROGRAM_SETUP 0x0010
+#define P30_CMD_BUFFERED_PROGRAM_SETUP 0x00E8
+#define P30_CMD_BUFFERED_PROGRAM_CONFIRM 0x00D0
+#define P30_CMD_BEFP_SETUP 0x0080
+#define P30_CMD_BEFP_CONFIRM 0x00D0
+
+// ERASE Commands
+#define P30_CMD_BLOCK_ERASE_SETUP 0x0020
+#define P30_CMD_BLOCK_ERASE_CONFIRM 0x00D0
+
+// SUSPEND Commands
+#define P30_CMD_PROGRAM_OR_ERASE_SUSPEND 0x00B0
+#define P30_CMD_SUSPEND_RESUME 0x00D0
+
+// BLOCK LOCKING / UNLOCKING Commands
+#define P30_CMD_LOCK_BLOCK_SETUP 0x0060
+#define P30_CMD_LOCK_BLOCK 0x0001
+#define P30_CMD_UNLOCK_BLOCK 0x00D0
+#define P30_CMD_LOCK_DOWN_BLOCK 0x002F
+
+// PROTECTION Commands
+#define P30_CMD_PROGRAM_PROTECTION_REGISTER_SETUP 0x00C0
+
+// CONFIGURATION Commands
+#define P30_CMD_READ_CONFIGURATION_REGISTER_SETUP 0x0060
+#define P30_CMD_READ_CONFIGURATION_REGISTER 0x0003
+
+#define NOR_FLASH_SIGNATURE SIGNATURE_32('n', 'o', 'r', '0')
+#define INSTANCE_FROM_FVB_THIS(a) CR(a, NOR_FLASH_INSTANCE, FvbProtocol, NOR_FLASH_SIGNATURE)
+#define INSTANCE_FROM_BLKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, BlockIoProtocol, NOR_FLASH_SIGNATURE)
+#define INSTANCE_FROM_DISKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, DiskIoProtocol, NOR_FLASH_SIGNATURE)
+
+typedef struct _NOR_FLASH_INSTANCE NOR_FLASH_INSTANCE;
+
+#pragma pack (1)
+typedef struct {
+ VENDOR_DEVICE_PATH Vendor;
+ UINT8 Index;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} NOR_FLASH_DEVICE_PATH;
+#pragma pack ()
+
+struct _NOR_FLASH_INSTANCE {
+ UINT32 Signature;
+ EFI_HANDLE Handle;
+
+ UINTN DeviceBaseAddress;
+ UINTN RegionBaseAddress;
+ UINTN Size;
+ EFI_LBA StartLba;
+
+ EFI_BLOCK_IO_PROTOCOL BlockIoProtocol;
+ EFI_BLOCK_IO_MEDIA Media;
+ EFI_DISK_IO_PROTOCOL DiskIoProtocol;
+
+ EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL FvbProtocol;
+ VOID *ShadowBuffer;
+
+ NOR_FLASH_DEVICE_PATH DevicePath;
+};
+
+EFI_STATUS
+NorFlashReadCfiData (
+ IN UINTN DeviceBaseAddress,
+ IN UINTN CFI_Offset,
+ IN UINT32 NumberOfBytes,
+ OUT UINT32 *Data
+ );
+
+EFI_STATUS
+NorFlashWriteBuffer (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN TargetAddress,
+ IN UINTN BufferSizeInBytes,
+ IN UINT32 *Buffer
+ );
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoReset (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ );
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoReadBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ OUT VOID *Buffer
+ );
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoWriteBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ IN VOID *Buffer
+ );
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoFlushBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This
+ );
+
+//
+// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.ReadDisk
+//
+EFI_STATUS
+EFIAPI
+NorFlashDiskIoReadDisk (
+ IN EFI_DISK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 Offset,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ );
+
+//
+// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.WriteDisk
+//
+EFI_STATUS
+EFIAPI
+NorFlashDiskIoWriteDisk (
+ IN EFI_DISK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 Offset,
+ IN UINTN BufferSize,
+ IN VOID *Buffer
+ );
+
+//
+// NorFlashFvbDxe.c
+//
+
+EFI_STATUS
+EFIAPI
+FvbGetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+EFIAPI
+FvbSetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+EFIAPI
+FvbGetPhysicalAddress (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ );
+
+EFI_STATUS
+EFIAPI
+FvbGetBlockSize (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ OUT UINTN *BlockSize,
+ OUT UINTN *NumberOfBlocks
+ );
+
+EFI_STATUS
+EFIAPI
+FvbRead (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN OUT UINT8 *Buffer
+ );
+
+EFI_STATUS
+EFIAPI
+FvbWrite (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+EFI_STATUS
+EFIAPI
+FvbEraseBlocks (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ ...
+ );
+
+EFI_STATUS
+ValidateFvHeader (
+ IN NOR_FLASH_INSTANCE *Instance
+ );
+
+EFI_STATUS
+InitializeFvAndVariableStoreHeaders (
+ IN NOR_FLASH_INSTANCE *Instance
+ );
+
+VOID
+EFIAPI
+FvbVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+//
+// NorFlashDxe.c
+//
+
+EFI_STATUS
+NorFlashWriteFullBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINT32 *DataBuffer,
+ IN UINT32 BlockSizeInWords
+ );
+
+EFI_STATUS
+NorFlashUnlockAndEraseSingleBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ );
+
+EFI_STATUS
+NorFlashCreateInstance (
+ IN UINTN NorFlashDeviceBase,
+ IN UINTN NorFlashRegionBase,
+ IN UINTN NorFlashSize,
+ IN UINT32 Index,
+ IN UINT32 BlockSize,
+ IN BOOLEAN SupportFvb,
+ OUT NOR_FLASH_INSTANCE **NorFlashInstance
+ );
+
+EFI_STATUS
+EFIAPI
+NorFlashFvbInitialize (
+ IN NOR_FLASH_INSTANCE *Instance
+ );
+
+//
+// NorFlash.c
+//
+EFI_STATUS
+NorFlashWriteSingleBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+EFI_STATUS
+NorFlashWriteBlocks (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ IN VOID *Buffer
+ );
+
+EFI_STATUS
+NorFlashReadBlocks (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ OUT VOID *Buffer
+ );
+
+EFI_STATUS
+NorFlashRead (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN UINTN BufferSizeInBytes,
+ OUT VOID *Buffer
+ );
+
+EFI_STATUS
+NorFlashWrite (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+EFI_STATUS
+NorFlashReset (
+ IN NOR_FLASH_INSTANCE *Instance
+ );
+
+EFI_STATUS
+NorFlashEraseSingleBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ );
+
+EFI_STATUS
+NorFlashUnlockSingleBlockIfNecessary (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ );
+
+EFI_STATUS
+NorFlashWriteSingleWord (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN WordAddress,
+ IN UINT32 WriteData
+ );
+
+VOID
+EFIAPI
+NorFlashVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+#endif /* __NOR_FLASH_H__ */
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c
new file mode 100644
index 000000000000..ecf152e35539
--- /dev/null
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c
@@ -0,0 +1,123 @@
+/** @file NorFlashBlockIoDxe.c
+
+ Copyright (c) 2011-2013, ARM Ltd. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include "VirtNorFlash.h"
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoReset (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+
+ Instance = INSTANCE_FROM_BLKIO_THIS (This);
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReset(MediaId=0x%x)\n", This->Media->MediaId));
+
+ return NorFlashReset (Instance);
+}
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoReadBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ OUT VOID *Buffer
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+ EFI_STATUS Status;
+ EFI_BLOCK_IO_MEDIA *Media;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Instance = INSTANCE_FROM_BLKIO_THIS (This);
+ Media = This->Media;
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReadBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes (%d kB), BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, BufferSizeInBytes, Buffer));
+
+ if (!Media) {
+ Status = EFI_INVALID_PARAMETER;
+ } else if (!Media->MediaPresent) {
+ Status = EFI_NO_MEDIA;
+ } else if (Media->MediaId != MediaId) {
+ Status = EFI_MEDIA_CHANGED;
+ } else if ((Media->IoAlign > 2) && (((UINTN)Buffer & (Media->IoAlign - 1)) != 0)) {
+ Status = EFI_INVALID_PARAMETER;
+ } else {
+ Status = NorFlashReadBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
+ }
+
+ return Status;
+}
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoWriteBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSizeInBytes,
+ IN VOID *Buffer
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+ EFI_STATUS Status;
+
+ Instance = INSTANCE_FROM_BLKIO_THIS (This);
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes, BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, Buffer));
+
+ if ( !This->Media->MediaPresent ) {
+ Status = EFI_NO_MEDIA;
+ } else if ( This->Media->MediaId != MediaId ) {
+ Status = EFI_MEDIA_CHANGED;
+ } else if ( This->Media->ReadOnly ) {
+ Status = EFI_WRITE_PROTECTED;
+ } else {
+ Status = NorFlashWriteBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
+ }
+
+ return Status;
+}
+
+//
+// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
+//
+EFI_STATUS
+EFIAPI
+NorFlashBlockIoFlushBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This
+ )
+{
+ // No Flush required for the NOR Flash driver
+ // because cache operations are not permitted.
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoFlushBlocks: Function NOT IMPLEMENTED (not required).\n"));
+
+ // Nothing to do so just return without error
+ return EFI_SUCCESS;
+}
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
new file mode 100644
index 000000000000..819425545e46
--- /dev/null
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
@@ -0,0 +1,506 @@
+/** @file NorFlashDxe.c
+
+ Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/HobLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include "VirtNorFlash.h"
+
+STATIC EFI_EVENT mNorFlashVirtualAddrChangeEvent;
+
+//
+// Global variable declarations
+//
+NOR_FLASH_INSTANCE **mNorFlashInstances;
+UINT32 mNorFlashDeviceCount;
+UINTN mFlashNvStorageVariableBase;
+EFI_EVENT mFvbVirtualAddrChangeEvent;
+
+NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
+ NOR_FLASH_SIGNATURE, // Signature
+ NULL, // Handle ... NEED TO BE FILLED
+
+ 0, // DeviceBaseAddress ... NEED TO BE FILLED
+ 0, // RegionBaseAddress ... NEED TO BE FILLED
+ 0, // Size ... NEED TO BE FILLED
+ 0, // StartLba
+
+ {
+ EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
+ NULL, // Media ... NEED TO BE FILLED
+ NorFlashBlockIoReset, // Reset;
+ NorFlashBlockIoReadBlocks, // ReadBlocks
+ NorFlashBlockIoWriteBlocks, // WriteBlocks
+ NorFlashBlockIoFlushBlocks // FlushBlocks
+ }, // BlockIoProtocol
+
+ {
+ 0, // MediaId ... NEED TO BE FILLED
+ FALSE, // RemovableMedia
+ TRUE, // MediaPresent
+ FALSE, // LogicalPartition
+ FALSE, // ReadOnly
+ FALSE, // WriteCaching;
+ 0, // BlockSize ... NEED TO BE FILLED
+ 4, // IoAlign
+ 0, // LastBlock ... NEED TO BE FILLED
+ 0, // LowestAlignedLba
+ 1, // LogicalBlocksPerPhysicalBlock
+ }, // Media;
+
+ {
+ EFI_DISK_IO_PROTOCOL_REVISION, // Revision
+ NorFlashDiskIoReadDisk, // ReadDisk
+ NorFlashDiskIoWriteDisk // WriteDisk
+ },
+
+ {
+ FvbGetAttributes, // GetAttributes
+ FvbSetAttributes, // SetAttributes
+ FvbGetPhysicalAddress, // GetPhysicalAddress
+ FvbGetBlockSize, // GetBlockSize
+ FvbRead, // Read
+ FvbWrite, // Write
+ FvbEraseBlocks, // EraseBlocks
+ NULL, // ParentHandle
+ }, // FvbProtoccol;
+ NULL, // ShadowBuffer
+ {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
+ (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
+ }
+ },
+ { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
+ }, // GUID ... NEED TO BE FILLED
+ },
+ 0, // Index
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
+ }
+ } // DevicePath
+};
+
+EFI_STATUS
+NorFlashCreateInstance (
+ IN UINTN NorFlashDeviceBase,
+ IN UINTN NorFlashRegionBase,
+ IN UINTN NorFlashSize,
+ IN UINT32 Index,
+ IN UINT32 BlockSize,
+ IN BOOLEAN SupportFvb,
+ OUT NOR_FLASH_INSTANCE **NorFlashInstance
+ )
+{
+ EFI_STATUS Status;
+ NOR_FLASH_INSTANCE *Instance;
+
+ ASSERT (NorFlashInstance != NULL);
+
+ Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
+ if (Instance == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Instance->DeviceBaseAddress = NorFlashDeviceBase;
+ Instance->RegionBaseAddress = NorFlashRegionBase;
+ Instance->Size = NorFlashSize;
+
+ Instance->BlockIoProtocol.Media = &Instance->Media;
+ Instance->Media.MediaId = Index;
+ Instance->Media.BlockSize = BlockSize;
+ Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
+
+ CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
+ Instance->DevicePath.Index = (UINT8)Index;
+
+ Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
+ if (Instance->ShadowBuffer == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ if (SupportFvb) {
+ NorFlashFvbInitialize (Instance);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Instance->Handle,
+ &gEfiDevicePathProtocolGuid,
+ &Instance->DevicePath,
+ &gEfiBlockIoProtocolGuid,
+ &Instance->BlockIoProtocol,
+ &gEfiFirmwareVolumeBlockProtocolGuid,
+ &Instance->FvbProtocol,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ FreePool (Instance);
+ return Status;
+ }
+ } else {
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Instance->Handle,
+ &gEfiDevicePathProtocolGuid,
+ &Instance->DevicePath,
+ &gEfiBlockIoProtocolGuid,
+ &Instance->BlockIoProtocol,
+ &gEfiDiskIoProtocolGuid,
+ &Instance->DiskIoProtocol,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ FreePool (Instance);
+ return Status;
+ }
+ }
+
+ *NorFlashInstance = Instance;
+ return Status;
+}
+
+/**
+ * This function unlock and erase an entire NOR Flash block.
+ **/
+EFI_STATUS
+NorFlashUnlockAndEraseSingleBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN UINTN BlockAddress
+ )
+{
+ EFI_STATUS Status;
+ UINTN Index;
+ EFI_TPL OriginalTPL;
+
+ if (!EfiAtRuntime ()) {
+ // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
+ OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+ } else {
+ // This initialization is only to prevent the compiler to complain about the
+ // use of uninitialized variables
+ OriginalTPL = TPL_HIGH_LEVEL;
+ }
+
+ Index = 0;
+ // The block erase might fail a first time (SW bug ?). Retry it ...
+ do {
+ // Unlock the block if we have to
+ Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+
+ Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
+ Index++;
+ } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
+
+ if (Index == NOR_FLASH_ERASE_RETRY) {
+ DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
+ }
+
+ if (!EfiAtRuntime ()) {
+ // Interruptions can resume.
+ gBS->RestoreTPL (OriginalTPL);
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+NorFlashWriteFullBlock (
+ IN NOR_FLASH_INSTANCE *Instance,
+ IN EFI_LBA Lba,
+ IN UINT32 *DataBuffer,
+ IN UINT32 BlockSizeInWords
+ )
+{
+ EFI_STATUS Status;
+ UINTN WordAddress;
+ UINT32 WordIndex;
+ UINTN BufferIndex;
+ UINTN BlockAddress;
+ UINTN BuffersInBlock;
+ UINTN RemainingWords;
+ EFI_TPL OriginalTPL;
+ UINTN Cnt;
+
+ Status = EFI_SUCCESS;
+
+ // Get the physical address of the block
+ BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
+
+ // Start writing from the first address at the start of the block
+ WordAddress = BlockAddress;
+
+ if (!EfiAtRuntime ()) {
+ // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
+ OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+ } else {
+ // This initialization is only to prevent the compiler to complain about the
+ // use of uninitialized variables
+ OriginalTPL = TPL_HIGH_LEVEL;
+ }
+
+ Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
+ goto EXIT;
+ }
+
+ // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
+
+ // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
+ if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
+ // First, break the entire block into buffer-sized chunks.
+ BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
+
+ // Then feed each buffer chunk to the NOR Flash
+ // If a buffer does not contain any data, don't write it.
+ for (BufferIndex = 0;
+ BufferIndex < BuffersInBlock;
+ BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
+ )
+ {
+ // Check the buffer to see if it contains any data (not set all 1s).
+ for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
+ if (~DataBuffer[Cnt] != 0 ) {
+ // Some data found, write the buffer.
+ Status = NorFlashWriteBuffer (
+ Instance,
+ WordAddress,
+ P30_MAX_BUFFER_SIZE_IN_BYTES,
+ DataBuffer
+ );
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ break;
+ }
+ }
+ }
+
+ // Finally, finish off any remaining words that are less than the maximum size of the buffer
+ RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
+
+ if (RemainingWords != 0) {
+ Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+ }
+ } else {
+ // For now, use the single word programming algorithm
+ // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
+ // i.e. which ends in the range 0x......01 - 0x......7F.
+ for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
+ Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+ }
+ }
+
+EXIT:
+ if (!EfiAtRuntime ()) {
+ // Interruptions can resume.
+ gBS->RestoreTPL (OriginalTPL);
+ }
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+NorFlashInitialise (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Index;
+ VIRT_NOR_FLASH_DESCRIPTION *NorFlashDevices;
+ BOOLEAN ContainVariableStorage;
+
+ Status = VirtNorFlashPlatformInitialization ();
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
+ return Status;
+ }
+
+ Status = VirtNorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
+ return Status;
+ }
+
+ mNorFlashInstances = AllocateRuntimePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
+
+ for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
+ // Check if this NOR Flash device contain the variable storage region
+
+ if (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
+ ContainVariableStorage =
+ (NorFlashDevices[Index].RegionBaseAddress <= PcdGet64 (PcdFlashNvStorageVariableBase64)) &&
+ (PcdGet64 (PcdFlashNvStorageVariableBase64) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
+ NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
+ } else {
+ ContainVariableStorage =
+ (NorFlashDevices[Index].RegionBaseAddress <= PcdGet32 (PcdFlashNvStorageVariableBase)) &&
+ (PcdGet32 (PcdFlashNvStorageVariableBase) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
+ NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
+ }
+
+ Status = NorFlashCreateInstance (
+ NorFlashDevices[Index].DeviceBaseAddress,
+ NorFlashDevices[Index].RegionBaseAddress,
+ NorFlashDevices[Index].Size,
+ Index,
+ NorFlashDevices[Index].BlockSize,
+ ContainVariableStorage,
+ &mNorFlashInstances[Index]
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
+ }
+ }
+
+ //
+ // Register for the virtual address change event
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ NorFlashVirtualNotifyEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mNorFlashVirtualAddrChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+NorFlashFvbInitialize (
+ IN NOR_FLASH_INSTANCE *Instance
+ )
+{
+ EFI_STATUS Status;
+ UINT32 FvbNumLba;
+ EFI_BOOT_MODE BootMode;
+ UINTN RuntimeMmioRegionSize;
+
+ DEBUG ((DEBUG_BLKIO, "NorFlashFvbInitialize\n"));
+ ASSERT ((Instance != NULL));
+
+ //
+ // Declare the Non-Volatile storage as EFI_MEMORY_RUNTIME
+ //
+
+ // Note: all the NOR Flash region needs to be reserved into the UEFI Runtime memory;
+ // even if we only use the small block region at the top of the NOR Flash.
+ // The reason is when the NOR Flash memory is set into program mode, the command
+ // is written as the base of the flash region (ie: Instance->DeviceBaseAddress)
+ RuntimeMmioRegionSize = (Instance->RegionBaseAddress - Instance->DeviceBaseAddress) + Instance->Size;
+
+ Status = gDS->AddMemorySpace (
+ EfiGcdMemoryTypeMemoryMappedIo,
+ Instance->DeviceBaseAddress,
+ RuntimeMmioRegionSize,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gDS->SetMemorySpaceAttributes (
+ Instance->DeviceBaseAddress,
+ RuntimeMmioRegionSize,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ mFlashNvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
+ PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
+
+ // Set the index of the first LBA for the FVB
+ Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
+
+ BootMode = GetBootModeHob ();
+ if (BootMode == BOOT_WITH_DEFAULT_SETTINGS) {
+ Status = EFI_INVALID_PARAMETER;
+ } else {
+ // Determine if there is a valid header at the beginning of the NorFlash
+ Status = ValidateFvHeader (Instance);
+ }
+
+ // Install the Default FVB header if required
+ if (EFI_ERROR (Status)) {
+ // There is no valid header, so time to install one.
+ DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: Installing a correct one for this volume.\n",
+ __FUNCTION__
+ ));
+
+ // Erase all the NorFlash that is reserved for variable storage
+ FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
+
+ Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Install all appropriate headers
+ Status = InitializeFvAndVariableStoreHeaders (Instance);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+
+ //
+ // The driver implementing the variable read service can now be dispatched;
+ // the varstore headers are in place.
+ //
+ Status = gBS->InstallProtocolInterface (
+ &gImageHandle,
+ &gEdkiiNvVarStoreFormattedGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Register for the virtual address change event
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ FvbVirtualNotifyEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mFvbVirtualAddrChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
new file mode 100644
index 000000000000..1bf50e482391
--- /dev/null
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
@@ -0,0 +1,72 @@
+#/** @file
+#
+# Component description file for NorFlashDxe module
+#
+# Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+ INF_VERSION = 1.29
+ BASE_NAME = VirtNorFlashDxe
+ FILE_GUID = e452cabd-5fe1-4d97-8161-e80ed6a409a8
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = NorFlashInitialise
+
+[Sources.common]
+ VirtNorFlash.c
+ VirtNorFlash.h
+ VirtNorFlashBlockIoDxe.c
+ VirtNorFlashDxe.c
+ VirtNorFlashFvb.c
+
+[Packages]
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ DxeServicesTableLib
+ HobLib
+ IoLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiLib
+ UefiRuntimeLib
+ VirtNorFlashPlatformLib
+
+[Guids]
+ gEdkiiNvVarStoreFormattedGuid ## PRODUCES ## PROTOCOL
+ gEfiAuthenticatedVariableGuid
+ gEfiEventVirtualAddressChangeGuid
+ gEfiSystemNvDataFvGuid
+ gEfiVariableGuid
+
+[Protocols]
+ gEfiBlockIoProtocolGuid
+ gEfiDevicePathProtocolGuid
+ gEfiDiskIoProtocolGuid
+ gEfiFirmwareVolumeBlockProtocolGuid
+
+[Pcd.common]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+
+ gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
+
+[Depex]
+ gEfiCpuArchProtocolGuid
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c
new file mode 100644
index 000000000000..c824e0a0fbad
--- /dev/null
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c
@@ -0,0 +1,777 @@
+/*++ @file NorFlashFvbDxe.c
+
+ Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ --*/
+
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiLib.h>
+
+#include <Guid/NvVarStoreFormatted.h>
+#include <Guid/SystemNvDataGuid.h>
+#include <Guid/VariableFormat.h>
+
+#include "VirtNorFlash.h"
+
+extern UINTN mFlashNvStorageVariableBase;
+///
+/// The Firmware Volume Block Protocol is the low-level interface
+/// to a firmware volume. File-level access to a firmware volume
+/// should not be done using the Firmware Volume Block Protocol.
+/// Normal access to a firmware volume must use the Firmware
+/// Volume Protocol. Typically, only the file system driver that
+/// produces the Firmware Volume Protocol will bind to the
+/// Firmware Volume Block Protocol.
+///
+
+/**
+ Initialises the FV Header and Variable Store Header
+ to support variable operations.
+
+ @param[in] Ptr - Location to initialise the headers
+
+**/
+EFI_STATUS
+InitializeFvAndVariableStoreHeaders (
+ IN NOR_FLASH_INSTANCE *Instance
+ )
+{
+ EFI_STATUS Status;
+ VOID *Headers;
+ UINTN HeadersLength;
+ EFI_FIRMWARE_VOLUME_HEADER *FirmwareVolumeHeader;
+ VARIABLE_STORE_HEADER *VariableStoreHeader;
+ UINT32 NvStorageFtwSpareSize;
+ UINT32 NvStorageFtwWorkingSize;
+ UINT32 NvStorageVariableSize;
+ UINT64 NvStorageFtwSpareBase;
+ UINT64 NvStorageFtwWorkingBase;
+ UINT64 NvStorageVariableBase;
+
+ HeadersLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY) + sizeof (VARIABLE_STORE_HEADER);
+ Headers = AllocateZeroPool (HeadersLength);
+
+ NvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
+ NvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+ NvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
+
+ NvStorageFtwSpareBase = (PcdGet64 (PcdFlashNvStorageFtwSpareBase64) != 0) ?
+ PcdGet64 (PcdFlashNvStorageFtwSpareBase64) : PcdGet32 (PcdFlashNvStorageFtwSpareBase);
+ NvStorageFtwWorkingBase = (PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) != 0) ?
+ PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) : PcdGet32 (PcdFlashNvStorageFtwWorkingBase);
+ NvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
+ PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
+
+ // FirmwareVolumeHeader->FvLength is declared to have the Variable area AND the FTW working area AND the FTW Spare contiguous.
+ if ((NvStorageVariableBase + NvStorageVariableSize) != NvStorageFtwWorkingBase) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: NvStorageFtwWorkingBase is not contiguous with NvStorageVariableBase region\n",
+ __FUNCTION__
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((NvStorageFtwWorkingBase + NvStorageFtwWorkingSize) != NvStorageFtwSpareBase) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: NvStorageFtwSpareBase is not contiguous with NvStorageFtwWorkingBase region\n",
+ __FUNCTION__
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Check if the size of the area is at least one block size
+ if ((NvStorageVariableSize <= 0) || (NvStorageVariableSize / Instance->Media.BlockSize <= 0)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: NvStorageVariableSize is 0x%x, should be atleast one block size\n",
+ __FUNCTION__,
+ NvStorageVariableSize
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((NvStorageFtwWorkingSize <= 0) || (NvStorageFtwWorkingSize / Instance->Media.BlockSize <= 0)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: NvStorageFtwWorkingSize is 0x%x, should be atleast one block size\n",
+ __FUNCTION__,
+ NvStorageFtwWorkingSize
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((NvStorageFtwSpareSize <= 0) || (NvStorageFtwSpareSize / Instance->Media.BlockSize <= 0)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: NvStorageFtwSpareSize is 0x%x, should be atleast one block size\n",
+ __FUNCTION__,
+ NvStorageFtwSpareSize
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Ensure the Variable area Base Addresses are aligned on a block size boundaries
+ if ((NvStorageVariableBase % Instance->Media.BlockSize != 0) ||
+ (NvStorageFtwWorkingBase % Instance->Media.BlockSize != 0) ||
+ (NvStorageFtwSpareBase % Instance->Media.BlockSize != 0))
+ {
+ DEBUG ((DEBUG_ERROR, "%a: NvStorage Base addresses must be aligned to block size boundaries", __FUNCTION__));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // EFI_FIRMWARE_VOLUME_HEADER
+ //
+ FirmwareVolumeHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Headers;
+ CopyGuid (&FirmwareVolumeHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid);
+ FirmwareVolumeHeader->FvLength =
+ PcdGet32 (PcdFlashNvStorageVariableSize) +
+ PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+ FirmwareVolumeHeader->Signature = EFI_FVH_SIGNATURE;
+ FirmwareVolumeHeader->Attributes = (EFI_FVB_ATTRIBUTES_2)(
+ EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
+ EFI_FVB2_READ_STATUS | // Reads are currently enabled
+ EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
+ EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
+ EFI_FVB2_ERASE_POLARITY | // After erasure all bits take this value (i.e. '1')
+ EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
+ EFI_FVB2_WRITE_ENABLED_CAP // Writes may be enabled
+ );
+ FirmwareVolumeHeader->HeaderLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY);
+ FirmwareVolumeHeader->Revision = EFI_FVH_REVISION;
+ FirmwareVolumeHeader->BlockMap[0].NumBlocks = Instance->Media.LastBlock + 1;
+ FirmwareVolumeHeader->BlockMap[0].Length = Instance->Media.BlockSize;
+ FirmwareVolumeHeader->BlockMap[1].NumBlocks = 0;
+ FirmwareVolumeHeader->BlockMap[1].Length = 0;
+ FirmwareVolumeHeader->Checksum = CalculateCheckSum16 ((UINT16 *)FirmwareVolumeHeader, FirmwareVolumeHeader->HeaderLength);
+
+ //
+ // VARIABLE_STORE_HEADER
+ //
+ VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)Headers + FirmwareVolumeHeader->HeaderLength);
+ CopyGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid);
+ VariableStoreHeader->Size = PcdGet32 (PcdFlashNvStorageVariableSize) - FirmwareVolumeHeader->HeaderLength;
+ VariableStoreHeader->Format = VARIABLE_STORE_FORMATTED;
+ VariableStoreHeader->State = VARIABLE_STORE_HEALTHY;
+
+ // Install the combined super-header in the NorFlash
+ Status = FvbWrite (&Instance->FvbProtocol, 0, 0, &HeadersLength, Headers);
+
+ FreePool (Headers);
+ return Status;
+}
+
+/**
+ Check the integrity of firmware volume header.
+
+ @param[in] FwVolHeader - A pointer to a firmware volume header
+
+ @retval EFI_SUCCESS - The firmware volume is consistent
+ @retval EFI_NOT_FOUND - The firmware volume has been corrupted.
+
+**/
+EFI_STATUS
+ValidateFvHeader (
+ IN NOR_FLASH_INSTANCE *Instance
+ )
+{
+ UINT16 Checksum;
+ EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;
+ VARIABLE_STORE_HEADER *VariableStoreHeader;
+ UINTN VariableStoreLength;
+ UINTN FvLength;
+
+ FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Instance->RegionBaseAddress;
+
+ FvLength = PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+
+ //
+ // Verify the header revision, header signature, length
+ // Length of FvBlock cannot be 2**64-1
+ // HeaderLength cannot be an odd number
+ //
+ if ( (FwVolHeader->Revision != EFI_FVH_REVISION)
+ || (FwVolHeader->Signature != EFI_FVH_SIGNATURE)
+ || (FwVolHeader->FvLength != FvLength)
+ )
+ {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: No Firmware Volume header present\n",
+ __FUNCTION__
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ // Check the Firmware Volume Guid
+ if ( CompareGuid (&FwVolHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid) == FALSE ) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: Firmware Volume Guid non-compatible\n",
+ __FUNCTION__
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ // Verify the header checksum
+ Checksum = CalculateSum16 ((UINT16 *)FwVolHeader, FwVolHeader->HeaderLength);
+ if (Checksum != 0) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: FV checksum is invalid (Checksum:0x%X)\n",
+ __FUNCTION__,
+ Checksum
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)FwVolHeader + FwVolHeader->HeaderLength);
+
+ // Check the Variable Store Guid
+ if (!CompareGuid (&VariableStoreHeader->Signature, &gEfiVariableGuid) &&
+ !CompareGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid))
+ {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: Variable Store Guid non-compatible\n",
+ __FUNCTION__
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ VariableStoreLength = PcdGet32 (PcdFlashNvStorageVariableSize) - FwVolHeader->HeaderLength;
+ if (VariableStoreHeader->Size != VariableStoreLength) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: Variable Store Length does not match\n",
+ __FUNCTION__
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ The GetAttributes() function retrieves the attributes and
+ current settings of the block.
+
+ @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
+
+ @param Attributes Pointer to EFI_FVB_ATTRIBUTES_2 in which the attributes and
+ current settings are returned.
+ Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
+
+ @retval EFI_SUCCESS The firmware volume attributes were returned.
+
+ **/
+EFI_STATUS
+EFIAPI
+FvbGetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+{
+ EFI_FVB_ATTRIBUTES_2 FlashFvbAttributes;
+ NOR_FLASH_INSTANCE *Instance;
+
+ Instance = INSTANCE_FROM_FVB_THIS (This);
+
+ FlashFvbAttributes = (EFI_FVB_ATTRIBUTES_2)(
+
+ EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
+ EFI_FVB2_READ_STATUS | // Reads are currently enabled
+ EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
+ EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
+ EFI_FVB2_ERASE_POLARITY // After erasure all bits take this value (i.e. '1')
+
+ );
+
+ // Check if it is write protected
+ if (Instance->Media.ReadOnly != TRUE) {
+ FlashFvbAttributes = FlashFvbAttributes |
+ EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
+ EFI_FVB2_WRITE_ENABLED_CAP; // Writes may be enabled
+ }
+
+ *Attributes = FlashFvbAttributes;
+
+ DEBUG ((DEBUG_BLKIO, "FvbGetAttributes(0x%X)\n", *Attributes));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ The SetAttributes() function sets configurable firmware volume attributes
+ and returns the new settings of the firmware volume.
+
+
+ @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
+
+ @param Attributes On input, Attributes is a pointer to EFI_FVB_ATTRIBUTES_2
+ that contains the desired firmware volume settings.
+ On successful return, it contains the new settings of
+ the firmware volume.
+ Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
+
+ @retval EFI_SUCCESS The firmware volume attributes were returned.
+
+ @retval EFI_INVALID_PARAMETER The attributes requested are in conflict with the capabilities
+ as declared in the firmware volume header.
+
+ **/
+EFI_STATUS
+EFIAPI
+FvbSetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+{
+ DEBUG ((DEBUG_BLKIO, "FvbSetAttributes(0x%X) is not supported\n", *Attributes));
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ The GetPhysicalAddress() function retrieves the base address of
+ a memory-mapped firmware volume. This function should be called
+ only for memory-mapped firmware volumes.
+
+ @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
+
+ @param Address Pointer to a caller-allocated
+ EFI_PHYSICAL_ADDRESS that, on successful
+ return from GetPhysicalAddress(), contains the
+ base address of the firmware volume.
+
+ @retval EFI_SUCCESS The firmware volume base address was returned.
+
+ @retval EFI_NOT_SUPPORTED The firmware volume is not memory mapped.
+
+ **/
+EFI_STATUS
+EFIAPI
+FvbGetPhysicalAddress (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+
+ Instance = INSTANCE_FROM_FVB_THIS (This);
+
+ DEBUG ((DEBUG_BLKIO, "FvbGetPhysicalAddress(BaseAddress=0x%08x)\n", Instance->RegionBaseAddress));
+
+ ASSERT (Address != NULL);
+
+ *Address = mFlashNvStorageVariableBase;
+ return EFI_SUCCESS;
+}
+
+/**
+ The GetBlockSize() function retrieves the size of the requested
+ block. It also returns the number of additional blocks with
+ the identical size. The GetBlockSize() function is used to
+ retrieve the block map (see EFI_FIRMWARE_VOLUME_HEADER).
+
+
+ @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
+
+ @param Lba Indicates the block for which to return the size.
+
+ @param BlockSize Pointer to a caller-allocated UINTN in which
+ the size of the block is returned.
+
+ @param NumberOfBlocks Pointer to a caller-allocated UINTN in
+ which the number of consecutive blocks,
+ starting with Lba, is returned. All
+ blocks in this range have a size of
+ BlockSize.
+
+
+ @retval EFI_SUCCESS The firmware volume base address was returned.
+
+ @retval EFI_INVALID_PARAMETER The requested LBA is out of range.
+
+ **/
+EFI_STATUS
+EFIAPI
+FvbGetBlockSize (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ OUT UINTN *BlockSize,
+ OUT UINTN *NumberOfBlocks
+ )
+{
+ EFI_STATUS Status;
+ NOR_FLASH_INSTANCE *Instance;
+
+ Instance = INSTANCE_FROM_FVB_THIS (This);
+
+ DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize(Lba=%ld, BlockSize=0x%x, LastBlock=%ld)\n", Lba, Instance->Media.BlockSize, Instance->Media.LastBlock));
+
+ if (Lba > Instance->Media.LastBlock) {
+ DEBUG ((DEBUG_ERROR, "FvbGetBlockSize: ERROR - Parameter LBA %ld is beyond the last Lba (%ld).\n", Lba, Instance->Media.LastBlock));
+ Status = EFI_INVALID_PARAMETER;
+ } else {
+ // This is easy because in this platform each NorFlash device has equal sized blocks.
+ *BlockSize = (UINTN)Instance->Media.BlockSize;
+ *NumberOfBlocks = (UINTN)(Instance->Media.LastBlock - Lba + 1);
+
+ DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize: *BlockSize=0x%x, *NumberOfBlocks=0x%x.\n", *BlockSize, *NumberOfBlocks));
+
+ Status = EFI_SUCCESS;
+ }
+
+ return Status;
+}
+
+/**
+ Reads the specified number of bytes into a buffer from the specified block.
+
+ The Read() function reads the requested number of bytes from the
+ requested block and stores them in the provided buffer.
+ Implementations should be mindful that the firmware volume
+ might be in the ReadDisabled state. If it is in this state,
+ the Read() function must return the status code
+ EFI_ACCESS_DENIED without modifying the contents of the
+ buffer. The Read() function must also prevent spanning block
+ boundaries. If a read is requested that would span a block
+ boundary, the read must read up to the boundary but not
+ beyond. The output parameter NumBytes must be set to correctly
+ indicate the number of bytes actually read. The caller must be
+ aware that a read may be partially completed.
+
+ @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
+
+ @param Lba The starting logical block index from which to read.
+
+ @param Offset Offset into the block at which to begin reading.
+
+ @param NumBytes Pointer to a UINTN.
+ At entry, *NumBytes contains the total size of the buffer.
+ At exit, *NumBytes contains the total number of bytes read.
+
+ @param Buffer Pointer to a caller-allocated buffer that will be used
+ to hold the data that is read.
+
+ @retval EFI_SUCCESS The firmware volume was read successfully, and contents are
+ in Buffer.
+
+ @retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary.
+ On output, NumBytes contains the total number of bytes
+ returned in Buffer.
+
+ @retval EFI_ACCESS_DENIED The firmware volume is in the ReadDisabled state.
+
+ @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be read.
+
+ **/
+EFI_STATUS
+EFIAPI
+FvbRead (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN OUT UINT8 *Buffer
+ )
+{
+ EFI_STATUS TempStatus;
+ UINTN BlockSize;
+ NOR_FLASH_INSTANCE *Instance;
+
+ Instance = INSTANCE_FROM_FVB_THIS (This);
+
+ DEBUG ((DEBUG_BLKIO, "FvbRead(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Instance->StartLba + Lba, Offset, *NumBytes, Buffer));
+
+ TempStatus = EFI_SUCCESS;
+
+ // Cache the block size to avoid de-referencing pointers all the time
+ BlockSize = Instance->Media.BlockSize;
+
+ DEBUG ((DEBUG_BLKIO, "FvbRead: Check if (Offset=0x%x + NumBytes=0x%x) <= BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
+
+ // The read must not span block boundaries.
+ // We need to check each variable individually because adding two large values together overflows.
+ if ((Offset >= BlockSize) ||
+ (*NumBytes > BlockSize) ||
+ ((Offset + *NumBytes) > BlockSize))
+ {
+ DEBUG ((DEBUG_ERROR, "FvbRead: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // We must have some bytes to read
+ if (*NumBytes == 0) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // Decide if we are doing full block reads or not.
+ if (*NumBytes % BlockSize != 0) {
+ TempStatus = NorFlashRead (Instance, Instance->StartLba + Lba, Offset, *NumBytes, Buffer);
+ if (EFI_ERROR (TempStatus)) {
+ return EFI_DEVICE_ERROR;
+ }
+ } else {
+ // Read NOR Flash data into shadow buffer
+ TempStatus = NorFlashReadBlocks (Instance, Instance->StartLba + Lba, BlockSize, Buffer);
+ if (EFI_ERROR (TempStatus)) {
+ // Return one of the pre-approved error statuses
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Writes the specified number of bytes from the input buffer to the block.
+
+ The Write() function writes the specified number of bytes from
+ the provided buffer to the specified block and offset. If the
+ firmware volume is sticky write, the caller must ensure that
+ all the bits of the specified range to write are in the
+ EFI_FVB_ERASE_POLARITY state before calling the Write()
+ function, or else the result will be unpredictable. This
+ unpredictability arises because, for a sticky-write firmware
+ volume, a write may negate a bit in the EFI_FVB_ERASE_POLARITY
+ state but cannot flip it back again. Before calling the
+ Write() function, it is recommended for the caller to first call
+ the EraseBlocks() function to erase the specified block to
+ write. A block erase cycle will transition bits from the
+ (NOT)EFI_FVB_ERASE_POLARITY state back to the
+ EFI_FVB_ERASE_POLARITY state. Implementations should be
+ mindful that the firmware volume might be in the WriteDisabled
+ state. If it is in this state, the Write() function must
+ return the status code EFI_ACCESS_DENIED without modifying the
+ contents of the firmware volume. The Write() function must
+ also prevent spanning block boundaries. If a write is
+ requested that spans a block boundary, the write must store up
+ to the boundary but not beyond. The output parameter NumBytes
+ must be set to correctly indicate the number of bytes actually
+ written. The caller must be aware that a write may be
+ partially completed. All writes, partial or otherwise, must be
+ fully flushed to the hardware before the Write() service
+ returns.
+
+ @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
+
+ @param Lba The starting logical block index to write to.
+
+ @param Offset Offset into the block at which to begin writing.
+
+ @param NumBytes The pointer to a UINTN.
+ At entry, *NumBytes contains the total size of the buffer.
+ At exit, *NumBytes contains the total number of bytes actually written.
+
+ @param Buffer The pointer to a caller-allocated buffer that contains the source for the write.
+
+ @retval EFI_SUCCESS The firmware volume was written successfully.
+
+ @retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
+ On output, NumBytes contains the total number of bytes
+ actually written.
+
+ @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
+
+ @retval EFI_DEVICE_ERROR The block device is malfunctioning and could not be written.
+
+
+ **/
+EFI_STATUS
+EFIAPI
+FvbWrite (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+
+ Instance = INSTANCE_FROM_FVB_THIS (This);
+
+ return NorFlashWriteSingleBlock (Instance, Instance->StartLba + Lba, Offset, NumBytes, Buffer);
+}
+
+/**
+ Erases and initialises a firmware volume block.
+
+ The EraseBlocks() function erases one or more blocks as denoted
+ by the variable argument list. The entire parameter list of
+ blocks must be verified before erasing any blocks. If a block is
+ requested that does not exist within the associated firmware
+ volume (it has a larger index than the last block of the
+ firmware volume), the EraseBlocks() function must return the
+ status code EFI_INVALID_PARAMETER without modifying the contents
+ of the firmware volume. Implementations should be mindful that
+ the firmware volume might be in the WriteDisabled state. If it
+ is in this state, the EraseBlocks() function must return the
+ status code EFI_ACCESS_DENIED without modifying the contents of
+ the firmware volume. All calls to EraseBlocks() must be fully
+ flushed to the hardware before the EraseBlocks() service
+ returns.
+
+ @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL
+ instance.
+
+ @param ... The variable argument list is a list of tuples.
+ Each tuple describes a range of LBAs to erase
+ and consists of the following:
+ - An EFI_LBA that indicates the starting LBA
+ - A UINTN that indicates the number of blocks to erase.
+
+ The list is terminated with an EFI_LBA_LIST_TERMINATOR.
+ For example, the following indicates that two ranges of blocks
+ (5-7 and 10-11) are to be erased:
+ EraseBlocks (This, 5, 3, 10, 2, EFI_LBA_LIST_TERMINATOR);
+
+ @retval EFI_SUCCESS The erase request successfully completed.
+
+ @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
+
+ @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be written.
+ The firmware device may have been partially erased.
+
+ @retval EFI_INVALID_PARAMETER One or more of the LBAs listed in the variable argument list do
+ not exist in the firmware volume.
+
+ **/
+EFI_STATUS
+EFIAPI
+FvbEraseBlocks (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
+ ...
+ )
+{
+ EFI_STATUS Status;
+ VA_LIST Args;
+ UINTN BlockAddress; // Physical address of Lba to erase
+ EFI_LBA StartingLba; // Lba from which we start erasing
+ UINTN NumOfLba; // Number of Lba blocks to erase
+ NOR_FLASH_INSTANCE *Instance;
+
+ Instance = INSTANCE_FROM_FVB_THIS (This);
+
+ DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks()\n"));
+
+ Status = EFI_SUCCESS;
+
+ // Detect WriteDisabled state
+ if (Instance->Media.ReadOnly == TRUE) {
+ // Firmware volume is in WriteDisabled state
+ DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Device is in WriteDisabled state.\n"));
+ return EFI_ACCESS_DENIED;
+ }
+
+ // Before erasing, check the entire list of parameters to ensure all specified blocks are valid
+
+ VA_START (Args, This);
+ do {
+ // Get the Lba from which we start erasing
+ StartingLba = VA_ARG (Args, EFI_LBA);
+
+ // Have we reached the end of the list?
+ if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
+ // Exit the while loop
+ break;
+ }
+
+ // How many Lba blocks are we requested to erase?
+ NumOfLba = VA_ARG (Args, UINTN);
+
+ // All blocks must be within range
+ DEBUG ((
+ DEBUG_BLKIO,
+ "FvbEraseBlocks: Check if: ( StartingLba=%ld + NumOfLba=%Lu - 1 ) > LastBlock=%ld.\n",
+ Instance->StartLba + StartingLba,
+ (UINT64)NumOfLba,
+ Instance->Media.LastBlock
+ ));
+ if ((NumOfLba == 0) || ((Instance->StartLba + StartingLba + NumOfLba - 1) > Instance->Media.LastBlock)) {
+ VA_END (Args);
+ DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Lba range goes past the last Lba.\n"));
+ Status = EFI_INVALID_PARAMETER;
+ goto EXIT;
+ }
+ } while (TRUE);
+
+ VA_END (Args);
+
+ //
+ // To get here, all must be ok, so start erasing
+ //
+ VA_START (Args, This);
+ do {
+ // Get the Lba from which we start erasing
+ StartingLba = VA_ARG (Args, EFI_LBA);
+
+ // Have we reached the end of the list?
+ if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
+ // Exit the while loop
+ break;
+ }
+
+ // How many Lba blocks are we requested to erase?
+ NumOfLba = VA_ARG (Args, UINTN);
+
+ // Go through each one and erase it
+ while (NumOfLba > 0) {
+ // Get the physical address of Lba to erase
+ BlockAddress = GET_NOR_BLOCK_ADDRESS (
+ Instance->RegionBaseAddress,
+ Instance->StartLba + StartingLba,
+ Instance->Media.BlockSize
+ );
+
+ // Erase it
+ DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks: Erasing Lba=%ld @ 0x%08x.\n", Instance->StartLba + StartingLba, BlockAddress));
+ Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
+ if (EFI_ERROR (Status)) {
+ VA_END (Args);
+ Status = EFI_DEVICE_ERROR;
+ goto EXIT;
+ }
+
+ // Move to the next Lba
+ StartingLba++;
+ NumOfLba--;
+ }
+ } while (TRUE);
+
+ VA_END (Args);
+
+EXIT:
+ return Status;
+}
+
+/**
+ Fixup internal data so that EFI can be call in virtual mode.
+ Call the passed in Child Notify event and convert any pointers in
+ lib to virtual mode.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+VOID
+EFIAPI
+FvbVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EfiConvertPointer (0x0, (VOID **)&mFlashNvStorageVariableBase);
+ return;
+}
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 03/11] OvmfPkg/VirtNorFlashDxe: remove CheckBlockLocked feature
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 01/11] OvmfPkg: clone NorFlashPlatformLib into VirtNorFlashPlatformLib Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 02/11] OvmfPkg/VirtNorFlashDxe: clone ArmPlatformPkg's NOR flash driver Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 04/11] OvmfPkg/VirtNorFlashDxe: remove disk I/O protocol implementation Ard Biesheuvel
` (9 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
We inherited a feature from the ArmPlatformPkg version of this driver
that never gets enabled. Let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c | 35 +++++---------------
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf | 3 --
2 files changed, 8 insertions(+), 30 deletions(-)
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
index 12fa720dad84..59a562efdf36 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
@@ -65,35 +65,16 @@ NorFlashUnlockSingleBlock (
// Raise the Task Priority Level to TPL_NOTIFY to serialise all its operations
// and to protect shared data structures.
- if (FeaturePcdGet (PcdNorFlashCheckBlockLocked) == TRUE) {
- do {
- // Request a lock setup
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
+ // Request a lock setup
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
- // Request an unlock
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
+ // Request an unlock
+ SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
- // Send command for reading device id
- SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
-
- // Read block lock status
- LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
-
- // Decode block lock status
- LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
- } while ((LockStatus & 0x1) == 1);
- } else {
- // Request a lock setup
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
-
- // Request an unlock
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
-
- // Wait until the status register gives us the all clear
- do {
- LockStatus = NorFlashReadStatusRegister (Instance, BlockAddress);
- } while ((LockStatus & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
- }
+ // Wait until the status register gives us the all clear
+ do {
+ LockStatus = NorFlashReadStatusRegister (Instance, BlockAddress);
+ } while ((LockStatus & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
// Put device back into Read Array mode
SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_READ_ARRAY);
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
index 1bf50e482391..53e9d5820488 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
@@ -24,7 +24,6 @@ [Sources.common]
VirtNorFlashFvb.c
[Packages]
- ArmPlatformPkg/ArmPlatformPkg.dec
EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
@@ -66,7 +65,5 @@ [Pcd.common]
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
- gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
-
[Depex]
gEfiCpuArchProtocolGuid
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 04/11] OvmfPkg/VirtNorFlashDxe: remove disk I/O protocol implementation
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (2 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 03/11] OvmfPkg/VirtNorFlashDxe: remove CheckBlockLocked feature Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 05/11] OvmfPkg/VirtNorFlashDxe: drop block " Ard Biesheuvel
` (8 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
We only use NOR flash for firmware volumes, either for executable images
or for the variable store. So we have no need for exposing disk I/O on
top of the NOR flash partitions so let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c | 129 --------------------
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h | 29 -----
OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c | 123 -------------------
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c | 8 --
4 files changed, 289 deletions(-)
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
index 59a562efdf36..1094d48f7de4 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
@@ -788,135 +788,6 @@ NorFlashWriteSingleBlock (
return EFI_SUCCESS;
}
-/*
- Although DiskIoDxe will automatically install the DiskIO protocol whenever
- we install the BlockIO protocol, its implementation is sub-optimal as it reads
- and writes entire blocks using the BlockIO protocol. In fact we can access
- NOR flash with a finer granularity than that, so we can improve performance
- by directly producing the DiskIO protocol.
-*/
-
-/**
- Read BufferSize bytes from Offset into Buffer.
-
- @param This Protocol instance pointer.
- @param MediaId Id of the media, changes every time the media is replaced.
- @param Offset The starting byte offset to read from
- @param BufferSize Size of Buffer
- @param Buffer Buffer containing read data
-
- @retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
- return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
-}
-
-/**
- Writes a specified number of bytes to a device.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to be written.
- @param Offset The starting byte offset on the logical block I/O device to write.
- @param BufferSize The size in bytes of Buffer. The number of bytes to write to the device.
- @param Buffer A pointer to the buffer containing the data to be written.
-
- @retval EFI_SUCCESS The data was written correctly to the device.
- @retval EFI_WRITE_PROTECTED The device can not be written to.
- @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
- UINTN RemainingBytes;
- UINTN WriteSize;
- EFI_STATUS Status;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
- RemainingBytes = BufferSize;
-
- // Write either all the remaining bytes, or the number of bytes that bring
- // us up to a block boundary, whichever is less.
- // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
- // block boundary (even if it is already on one).
- WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset);
-
- do {
- if (WriteSize == BlockSize) {
- // Write a full block
- Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32));
- } else {
- // Write a partial block
- Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer);
- }
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Now continue writing either all the remaining bytes or single blocks.
- RemainingBytes -= WriteSize;
- Buffer = (UINT8 *)Buffer + WriteSize;
- Lba++;
- BlockOffset = 0;
- WriteSize = MIN (RemainingBytes, BlockSize);
- } while (RemainingBytes);
-
- return Status;
-}
-
EFI_STATUS
NorFlashReset (
IN NOR_FLASH_INSTANCE *Instance
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
index c1e5f2ca3131..71af755e8366 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
@@ -15,7 +15,6 @@
#include <Guid/EventGroup.h>
#include <Protocol/BlockIo.h>
-#include <Protocol/DiskIo.h>
#include <Protocol/FirmwareVolumeBlock.h>
#include <Library/DebugLib.h>
@@ -111,7 +110,6 @@
#define NOR_FLASH_SIGNATURE SIGNATURE_32('n', 'o', 'r', '0')
#define INSTANCE_FROM_FVB_THIS(a) CR(a, NOR_FLASH_INSTANCE, FvbProtocol, NOR_FLASH_SIGNATURE)
#define INSTANCE_FROM_BLKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, BlockIoProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_DISKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, DiskIoProtocol, NOR_FLASH_SIGNATURE)
typedef struct _NOR_FLASH_INSTANCE NOR_FLASH_INSTANCE;
@@ -134,7 +132,6 @@ struct _NOR_FLASH_INSTANCE {
EFI_BLOCK_IO_PROTOCOL BlockIoProtocol;
EFI_BLOCK_IO_MEDIA Media;
- EFI_DISK_IO_PROTOCOL DiskIoProtocol;
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL FvbProtocol;
VOID *ShadowBuffer;
@@ -203,32 +200,6 @@ NorFlashBlockIoFlushBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This
);
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.ReadDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- );
-
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.WriteDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- );
-
//
// NorFlashFvbDxe.c
//
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c
deleted file mode 100644
index ecf152e35539..000000000000
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashBlockIoDxe.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/** @file NorFlashBlockIoDxe.c
-
- Copyright (c) 2011-2013, ARM Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-
-#include "VirtNorFlash.h"
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-{
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReset(MediaId=0x%x)\n", This->Media->MediaId));
-
- return NorFlashReset (Instance);
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- EFI_STATUS Status;
- EFI_BLOCK_IO_MEDIA *Media;
-
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
- Media = This->Media;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReadBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes (%d kB), BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, BufferSizeInBytes, Buffer));
-
- if (!Media) {
- Status = EFI_INVALID_PARAMETER;
- } else if (!Media->MediaPresent) {
- Status = EFI_NO_MEDIA;
- } else if (Media->MediaId != MediaId) {
- Status = EFI_MEDIA_CHANGED;
- } else if ((Media->IoAlign > 2) && (((UINTN)Buffer & (Media->IoAlign - 1)) != 0)) {
- Status = EFI_INVALID_PARAMETER;
- } else {
- Status = NorFlashReadBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
- }
-
- return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- EFI_STATUS Status;
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes, BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, Buffer));
-
- if ( !This->Media->MediaPresent ) {
- Status = EFI_NO_MEDIA;
- } else if ( This->Media->MediaId != MediaId ) {
- Status = EFI_MEDIA_CHANGED;
- } else if ( This->Media->ReadOnly ) {
- Status = EFI_WRITE_PROTECTED;
- } else {
- Status = NorFlashWriteBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
- }
-
- return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This
- )
-{
- // No Flush required for the NOR Flash driver
- // because cache operations are not permitted.
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoFlushBlocks: Function NOT IMPLEMENTED (not required).\n"));
-
- // Nothing to do so just return without error
- return EFI_SUCCESS;
-}
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
index 819425545e46..4875b057d5e2 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
@@ -58,12 +58,6 @@ NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
1, // LogicalBlocksPerPhysicalBlock
}, // Media;
- {
- EFI_DISK_IO_PROTOCOL_REVISION, // Revision
- NorFlashDiskIoReadDisk, // ReadDisk
- NorFlashDiskIoWriteDisk // WriteDisk
- },
-
{
FvbGetAttributes, // GetAttributes
FvbSetAttributes, // SetAttributes
@@ -159,8 +153,6 @@ NorFlashCreateInstance (
&Instance->DevicePath,
&gEfiBlockIoProtocolGuid,
&Instance->BlockIoProtocol,
- &gEfiDiskIoProtocolGuid,
- &Instance->DiskIoProtocol,
NULL
);
if (EFI_ERROR (Status)) {
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 05/11] OvmfPkg/VirtNorFlashDxe: drop block I/O protocol implementation
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (3 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 04/11] OvmfPkg/VirtNorFlashDxe: remove disk I/O protocol implementation Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 06/11] OvmfPkg/VirtNorFlashDxe: avoid array mode switch after each word write Ard Biesheuvel
` (7 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
We never boot from NOR flash, and generally rely on the firmware volume
PI protocols to expose the contents. So drop the block I/O protocol
implementation from VirtNorFlashDxe.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c | 49 ++++++------------
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h | 52 +-------------------
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c | 40 +++------------
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf | 1 -
OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c | 52 ++++++++------------
5 files changed, 44 insertions(+), 150 deletions(-)
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
index 1094d48f7de4..f41d9d372f49 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
@@ -366,10 +366,6 @@ NorFlashWriteBlocks (
return EFI_INVALID_PARAMETER;
}
- if (Instance->Media.ReadOnly == TRUE) {
- return EFI_WRITE_PROTECTED;
- }
-
// We must have some bytes to read
DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BufferSizeInBytes=0x%x\n", BufferSizeInBytes));
if (BufferSizeInBytes == 0) {
@@ -377,22 +373,22 @@ NorFlashWriteBlocks (
}
// The size of the buffer must be a multiple of the block size
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BlockSize in bytes =0x%x\n", Instance->Media.BlockSize));
- if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BlockSize in bytes =0x%x\n", Instance->BlockSize));
+ if ((BufferSizeInBytes % Instance->BlockSize) != 0) {
return EFI_BAD_BUFFER_SIZE;
}
// All blocks must be within the device
- NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
+ NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->BlockSize;
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: NumBlocks=%d, LastBlock=%ld, Lba=%ld.\n", NumBlocks, Instance->Media.LastBlock, Lba));
+ DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: NumBlocks=%d, LastBlock=%ld, Lba=%ld.\n", NumBlocks, Instance->LastBlock, Lba));
- if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
+ if ((Lba + NumBlocks) > (Instance->LastBlock + 1)) {
DEBUG ((DEBUG_ERROR, "NorFlashWriteBlocks: ERROR - Write will exceed last block.\n"));
return EFI_INVALID_PARAMETER;
}
- BlockSizeInWords = Instance->Media.BlockSize / 4;
+ BlockSizeInWords = Instance->BlockSize / 4;
// Because the target *Buffer is a pointer to VOID, we must put all the data into a pointer
// to a proper data type, so use *ReadBuffer
@@ -489,8 +485,8 @@ NorFlashReadBlocks (
DEBUG_BLKIO,
"NorFlashReadBlocks: BufferSize=0x%xB BlockSize=0x%xB LastBlock=%ld, Lba=%ld.\n",
BufferSizeInBytes,
- Instance->Media.BlockSize,
- Instance->Media.LastBlock,
+ Instance->BlockSize,
+ Instance->LastBlock,
Lba
));
@@ -505,14 +501,14 @@ NorFlashReadBlocks (
}
// The size of the buffer must be a multiple of the block size
- if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
+ if ((BufferSizeInBytes % Instance->BlockSize) != 0) {
return EFI_BAD_BUFFER_SIZE;
}
// All blocks must be within the device
- NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
+ NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->BlockSize;
- if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
+ if ((Lba + NumBlocks) > (Instance->LastBlock + 1)) {
DEBUG ((DEBUG_ERROR, "NorFlashReadBlocks: ERROR - Read will exceed last block\n"));
return EFI_INVALID_PARAMETER;
}
@@ -521,7 +517,7 @@ NorFlashReadBlocks (
StartAddress = GET_NOR_BLOCK_ADDRESS (
Instance->RegionBaseAddress,
Lba,
- Instance->Media.BlockSize
+ Instance->BlockSize
);
// Put the device into Read Array mode
@@ -554,7 +550,7 @@ NorFlashRead (
return EFI_SUCCESS;
}
- if (((Lba * Instance->Media.BlockSize) + Offset + BufferSizeInBytes) > Instance->Size) {
+ if (((Lba * Instance->BlockSize) + Offset + BufferSizeInBytes) > Instance->Size) {
DEBUG ((DEBUG_ERROR, "NorFlashRead: ERROR - Read will exceed device size.\n"));
return EFI_INVALID_PARAMETER;
}
@@ -563,7 +559,7 @@ NorFlashRead (
StartAddress = GET_NOR_BLOCK_ADDRESS (
Instance->RegionBaseAddress,
Lba,
- Instance->Media.BlockSize
+ Instance->BlockSize
);
// Put the device into Read Array mode
@@ -577,7 +573,7 @@ NorFlashRead (
/*
Write a full or portion of a block. It must not span block boundaries; that is,
- Offset + *NumBytes <= Instance->Media.BlockSize.
+ Offset + *NumBytes <= Instance->BlockSize.
*/
EFI_STATUS
NorFlashWriteSingleBlock (
@@ -605,15 +601,8 @@ NorFlashWriteSingleBlock (
DEBUG ((DEBUG_BLKIO, "NorFlashWriteSingleBlock(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Lba, Offset, *NumBytes, Buffer));
- // Detect WriteDisabled state
- if (Instance->Media.ReadOnly == TRUE) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - Can not write: Device is in WriteDisabled state.\n"));
- // It is in WriteDisabled state, return an error right away
- return EFI_ACCESS_DENIED;
- }
-
// Cache the block size to avoid de-referencing pointers all the time
- BlockSize = Instance->Media.BlockSize;
+ BlockSize = Instance->BlockSize;
// The write must not span block boundaries.
// We need to check each variable individually because adding two large values together overflows.
@@ -819,12 +808,6 @@ NorFlashVirtualNotifyEvent (
EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->DeviceBaseAddress);
EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->RegionBaseAddress);
- // Convert BlockIo protocol
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.FlushBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.ReadBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.Reset);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.WriteBlocks);
-
// Convert Fvb
EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.EraseBlocks);
EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetAttributes);
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
index 71af755e8366..df3cdb05d065 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.h
@@ -14,7 +14,6 @@
#include <Guid/EventGroup.h>
-#include <Protocol/BlockIo.h>
#include <Protocol/FirmwareVolumeBlock.h>
#include <Library/DebugLib.h>
@@ -109,7 +108,6 @@
#define NOR_FLASH_SIGNATURE SIGNATURE_32('n', 'o', 'r', '0')
#define INSTANCE_FROM_FVB_THIS(a) CR(a, NOR_FLASH_INSTANCE, FvbProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_BLKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, BlockIoProtocol, NOR_FLASH_SIGNATURE)
typedef struct _NOR_FLASH_INSTANCE NOR_FLASH_INSTANCE;
@@ -129,9 +127,8 @@ struct _NOR_FLASH_INSTANCE {
UINTN RegionBaseAddress;
UINTN Size;
EFI_LBA StartLba;
-
- EFI_BLOCK_IO_PROTOCOL BlockIoProtocol;
- EFI_BLOCK_IO_MEDIA Media;
+ EFI_LBA LastBlock;
+ UINT32 BlockSize;
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL FvbProtocol;
VOID *ShadowBuffer;
@@ -155,51 +152,6 @@ NorFlashWriteBuffer (
IN UINT32 *Buffer
);
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This
- );
-
//
// NorFlashFvbDxe.c
//
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
index 4875b057d5e2..2ceda226359c 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
@@ -34,29 +34,8 @@ NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
0, // RegionBaseAddress ... NEED TO BE FILLED
0, // Size ... NEED TO BE FILLED
0, // StartLba
-
- {
- EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
- NULL, // Media ... NEED TO BE FILLED
- NorFlashBlockIoReset, // Reset;
- NorFlashBlockIoReadBlocks, // ReadBlocks
- NorFlashBlockIoWriteBlocks, // WriteBlocks
- NorFlashBlockIoFlushBlocks // FlushBlocks
- }, // BlockIoProtocol
-
- {
- 0, // MediaId ... NEED TO BE FILLED
- FALSE, // RemovableMedia
- TRUE, // MediaPresent
- FALSE, // LogicalPartition
- FALSE, // ReadOnly
- FALSE, // WriteCaching;
- 0, // BlockSize ... NEED TO BE FILLED
- 4, // IoAlign
- 0, // LastBlock ... NEED TO BE FILLED
- 0, // LowestAlignedLba
- 1, // LogicalBlocksPerPhysicalBlock
- }, // Media;
+ 0, // LastBlock
+ 0, // BlockSize
{
FvbGetAttributes, // GetAttributes
@@ -115,11 +94,8 @@ NorFlashCreateInstance (
Instance->DeviceBaseAddress = NorFlashDeviceBase;
Instance->RegionBaseAddress = NorFlashRegionBase;
Instance->Size = NorFlashSize;
-
- Instance->BlockIoProtocol.Media = &Instance->Media;
- Instance->Media.MediaId = Index;
- Instance->Media.BlockSize = BlockSize;
- Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
+ Instance->BlockSize = BlockSize;
+ Instance->LastBlock = (NorFlashSize / BlockSize) - 1;
CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
Instance->DevicePath.Index = (UINT8)Index;
@@ -136,8 +112,6 @@ NorFlashCreateInstance (
&Instance->Handle,
&gEfiDevicePathProtocolGuid,
&Instance->DevicePath,
- &gEfiBlockIoProtocolGuid,
- &Instance->BlockIoProtocol,
&gEfiFirmwareVolumeBlockProtocolGuid,
&Instance->FvbProtocol,
NULL
@@ -151,8 +125,6 @@ NorFlashCreateInstance (
&Instance->Handle,
&gEfiDevicePathProtocolGuid,
&Instance->DevicePath,
- &gEfiBlockIoProtocolGuid,
- &Instance->BlockIoProtocol,
NULL
);
if (EFI_ERROR (Status)) {
@@ -434,7 +406,7 @@ NorFlashFvbInitialize (
PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
// Set the index of the first LBA for the FVB
- Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
+ Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->BlockSize;
BootMode = GetBootModeHob ();
if (BootMode == BOOT_WITH_DEFAULT_SETTINGS) {
@@ -455,7 +427,7 @@ NorFlashFvbInitialize (
));
// Erase all the NorFlash that is reserved for variable storage
- FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
+ FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->BlockSize;
Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
if (EFI_ERROR (Status)) {
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
index 53e9d5820488..2a3d4a218e61 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
@@ -19,7 +19,6 @@ [Defines]
[Sources.common]
VirtNorFlash.c
VirtNorFlash.h
- VirtNorFlashBlockIoDxe.c
VirtNorFlashDxe.c
VirtNorFlashFvb.c
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c
index c824e0a0fbad..eefa71fa1e20 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashFvb.c
@@ -89,7 +89,7 @@ InitializeFvAndVariableStoreHeaders (
}
// Check if the size of the area is at least one block size
- if ((NvStorageVariableSize <= 0) || (NvStorageVariableSize / Instance->Media.BlockSize <= 0)) {
+ if ((NvStorageVariableSize <= 0) || (NvStorageVariableSize / Instance->BlockSize <= 0)) {
DEBUG ((
DEBUG_ERROR,
"%a: NvStorageVariableSize is 0x%x, should be atleast one block size\n",
@@ -99,7 +99,7 @@ InitializeFvAndVariableStoreHeaders (
return EFI_INVALID_PARAMETER;
}
- if ((NvStorageFtwWorkingSize <= 0) || (NvStorageFtwWorkingSize / Instance->Media.BlockSize <= 0)) {
+ if ((NvStorageFtwWorkingSize <= 0) || (NvStorageFtwWorkingSize / Instance->BlockSize <= 0)) {
DEBUG ((
DEBUG_ERROR,
"%a: NvStorageFtwWorkingSize is 0x%x, should be atleast one block size\n",
@@ -109,7 +109,7 @@ InitializeFvAndVariableStoreHeaders (
return EFI_INVALID_PARAMETER;
}
- if ((NvStorageFtwSpareSize <= 0) || (NvStorageFtwSpareSize / Instance->Media.BlockSize <= 0)) {
+ if ((NvStorageFtwSpareSize <= 0) || (NvStorageFtwSpareSize / Instance->BlockSize <= 0)) {
DEBUG ((
DEBUG_ERROR,
"%a: NvStorageFtwSpareSize is 0x%x, should be atleast one block size\n",
@@ -120,9 +120,9 @@ InitializeFvAndVariableStoreHeaders (
}
// Ensure the Variable area Base Addresses are aligned on a block size boundaries
- if ((NvStorageVariableBase % Instance->Media.BlockSize != 0) ||
- (NvStorageFtwWorkingBase % Instance->Media.BlockSize != 0) ||
- (NvStorageFtwSpareBase % Instance->Media.BlockSize != 0))
+ if ((NvStorageVariableBase % Instance->BlockSize != 0) ||
+ (NvStorageFtwWorkingBase % Instance->BlockSize != 0) ||
+ (NvStorageFtwSpareBase % Instance->BlockSize != 0))
{
DEBUG ((DEBUG_ERROR, "%a: NvStorage Base addresses must be aligned to block size boundaries", __FUNCTION__));
return EFI_INVALID_PARAMETER;
@@ -149,8 +149,8 @@ InitializeFvAndVariableStoreHeaders (
);
FirmwareVolumeHeader->HeaderLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY);
FirmwareVolumeHeader->Revision = EFI_FVH_REVISION;
- FirmwareVolumeHeader->BlockMap[0].NumBlocks = Instance->Media.LastBlock + 1;
- FirmwareVolumeHeader->BlockMap[0].Length = Instance->Media.BlockSize;
+ FirmwareVolumeHeader->BlockMap[0].NumBlocks = Instance->LastBlock + 1;
+ FirmwareVolumeHeader->BlockMap[0].Length = Instance->BlockSize;
FirmwareVolumeHeader->BlockMap[1].NumBlocks = 0;
FirmwareVolumeHeader->BlockMap[1].Length = 0;
FirmwareVolumeHeader->Checksum = CalculateCheckSum16 ((UINT16 *)FirmwareVolumeHeader, FirmwareVolumeHeader->HeaderLength);
@@ -294,17 +294,12 @@ FvbGetAttributes (
EFI_FVB2_READ_STATUS | // Reads are currently enabled
EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
- EFI_FVB2_ERASE_POLARITY // After erasure all bits take this value (i.e. '1')
+ EFI_FVB2_ERASE_POLARITY | // After erasure all bits take this value (i.e. '1')
+ EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
+ EFI_FVB2_WRITE_ENABLED_CAP // Writes may be enabled
);
- // Check if it is write protected
- if (Instance->Media.ReadOnly != TRUE) {
- FlashFvbAttributes = FlashFvbAttributes |
- EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
- EFI_FVB2_WRITE_ENABLED_CAP; // Writes may be enabled
- }
-
*Attributes = FlashFvbAttributes;
DEBUG ((DEBUG_BLKIO, "FvbGetAttributes(0x%X)\n", *Attributes));
@@ -418,15 +413,15 @@ FvbGetBlockSize (
Instance = INSTANCE_FROM_FVB_THIS (This);
- DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize(Lba=%ld, BlockSize=0x%x, LastBlock=%ld)\n", Lba, Instance->Media.BlockSize, Instance->Media.LastBlock));
+ DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize(Lba=%ld, BlockSize=0x%x, LastBlock=%ld)\n", Lba, Instance->BlockSize, Instance->LastBlock));
- if (Lba > Instance->Media.LastBlock) {
- DEBUG ((DEBUG_ERROR, "FvbGetBlockSize: ERROR - Parameter LBA %ld is beyond the last Lba (%ld).\n", Lba, Instance->Media.LastBlock));
+ if (Lba > Instance->LastBlock) {
+ DEBUG ((DEBUG_ERROR, "FvbGetBlockSize: ERROR - Parameter LBA %ld is beyond the last Lba (%ld).\n", Lba, Instance->LastBlock));
Status = EFI_INVALID_PARAMETER;
} else {
// This is easy because in this platform each NorFlash device has equal sized blocks.
- *BlockSize = (UINTN)Instance->Media.BlockSize;
- *NumberOfBlocks = (UINTN)(Instance->Media.LastBlock - Lba + 1);
+ *BlockSize = (UINTN)Instance->BlockSize;
+ *NumberOfBlocks = (UINTN)(Instance->LastBlock - Lba + 1);
DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize: *BlockSize=0x%x, *NumberOfBlocks=0x%x.\n", *BlockSize, *NumberOfBlocks));
@@ -498,7 +493,7 @@ FvbRead (
TempStatus = EFI_SUCCESS;
// Cache the block size to avoid de-referencing pointers all the time
- BlockSize = Instance->Media.BlockSize;
+ BlockSize = Instance->BlockSize;
DEBUG ((DEBUG_BLKIO, "FvbRead: Check if (Offset=0x%x + NumBytes=0x%x) <= BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
@@ -669,13 +664,6 @@ FvbEraseBlocks (
Status = EFI_SUCCESS;
- // Detect WriteDisabled state
- if (Instance->Media.ReadOnly == TRUE) {
- // Firmware volume is in WriteDisabled state
- DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Device is in WriteDisabled state.\n"));
- return EFI_ACCESS_DENIED;
- }
-
// Before erasing, check the entire list of parameters to ensure all specified blocks are valid
VA_START (Args, This);
@@ -698,9 +686,9 @@ FvbEraseBlocks (
"FvbEraseBlocks: Check if: ( StartingLba=%ld + NumOfLba=%Lu - 1 ) > LastBlock=%ld.\n",
Instance->StartLba + StartingLba,
(UINT64)NumOfLba,
- Instance->Media.LastBlock
+ Instance->LastBlock
));
- if ((NumOfLba == 0) || ((Instance->StartLba + StartingLba + NumOfLba - 1) > Instance->Media.LastBlock)) {
+ if ((NumOfLba == 0) || ((Instance->StartLba + StartingLba + NumOfLba - 1) > Instance->LastBlock)) {
VA_END (Args);
DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Lba range goes past the last Lba.\n"));
Status = EFI_INVALID_PARAMETER;
@@ -733,7 +721,7 @@ FvbEraseBlocks (
BlockAddress = GET_NOR_BLOCK_ADDRESS (
Instance->RegionBaseAddress,
Instance->StartLba + StartingLba,
- Instance->Media.BlockSize
+ Instance->BlockSize
);
// Erase it
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 06/11] OvmfPkg/VirtNorFlashDxe: avoid array mode switch after each word write
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (4 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 05/11] OvmfPkg/VirtNorFlashDxe: drop block " Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 07/11] OvmfPkg/VirtNorFlashDxe: avoid switching between modes in a tight loop Ard Biesheuvel
` (6 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
NorFlashWriteSingleWord() switches into programming mode and back into
array mode for every single word that it writes. Under KVM, this
involves tearing down the read-only memslot, and setting it up again,
which is costly and unnecessary.
Instead, move the array mode switch into the callers, and only make the
switch when the writing is done.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c | 12 +++---------
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c | 3 +++
2 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
index f41d9d372f49..0a5c5d48c738 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
@@ -205,9 +205,6 @@ NorFlashWriteSingleWord (
SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
}
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
return Status;
}
@@ -286,8 +283,7 @@ NorFlashWriteBuffer (
// The buffer was not available for writing
if (WaitForBuffer == 0) {
- Status = EFI_DEVICE_ERROR;
- goto EXIT;
+ return EFI_DEVICE_ERROR;
}
// From now on we work in 32-bit words
@@ -337,10 +333,6 @@ NorFlashWriteBuffer (
SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
}
-EXIT:
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
return Status;
}
@@ -739,6 +731,8 @@ NorFlashWriteSingleBlock (
}
TempStatus = NorFlashWriteSingleWord (Instance, WordAddr, WordToWrite);
+ // Put device back into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
if (EFI_ERROR (TempStatus)) {
return EFI_DEVICE_ERROR;
}
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
index 2ceda226359c..f9a41f6aab0f 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
@@ -280,6 +280,9 @@ NorFlashWriteFullBlock (
}
EXIT:
+ // Put device back into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+
if (!EfiAtRuntime ()) {
// Interruptions can resume.
gBS->RestoreTPL (OriginalTPL);
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 07/11] OvmfPkg/VirtNorFlashDxe: avoid switching between modes in a tight loop
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (5 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 06/11] OvmfPkg/VirtNorFlashDxe: avoid array mode switch after each word write Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 08/11] OvmfPkg/VirtNorFlashDxe: use EFI_MEMORY_WC and drop AlignedCopyMem() Ard Biesheuvel
` (5 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
Currently, when dealing with small updates that can be written out
directly (i.e., if they only involve clearing bits and not setting bits,
as the latter requires a block level erase), we iterate over the data
one word at a time, read the old value, compare it, write the new value,
and repeat, unless we encountered a value that we cannot write (0->1
transition), in which case we fall back to a block level operation.
This is inefficient for two reasons:
- reading and writing a word at a time involves switching between array
and programming mode for every word of data, which is
disproportionately costly when running under KVM;
- we end up writing some data twice, as we may not notice that a block
erase is needed until after some data has been written to flash.
So replace this sequence with a single read of up to twice the buffered
write maximum size, followed by one or two buffered writes if the data
can be written directly. Otherwise, fall back to the existing block
level sequence, but without writing out part of the data twice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c | 208 +++++++-------------
1 file changed, 71 insertions(+), 137 deletions(-)
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
index 0a5c5d48c738..d87cdd49d6a6 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
@@ -576,23 +576,20 @@ NorFlashWriteSingleBlock (
IN UINT8 *Buffer
)
{
- EFI_STATUS TempStatus;
- UINT32 Tmp;
- UINT32 TmpBuf;
- UINT32 WordToWrite;
- UINT32 Mask;
- BOOLEAN DoErase;
- UINTN BytesToWrite;
+ EFI_STATUS Status;
UINTN CurOffset;
- UINTN WordAddr;
UINTN BlockSize;
UINTN BlockAddress;
- UINTN PrevBlockAddress;
-
- PrevBlockAddress = 0;
+ UINT8 *OrigData;
DEBUG ((DEBUG_BLKIO, "NorFlashWriteSingleBlock(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Lba, Offset, *NumBytes, Buffer));
+ // Check we did get some memory. Buffer is BlockSize.
+ if (Instance->ShadowBuffer == NULL) {
+ DEBUG ((DEBUG_ERROR, "FvbWrite: ERROR - Buffer not ready\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
// Cache the block size to avoid de-referencing pointers all the time
BlockSize = Instance->BlockSize;
@@ -612,148 +609,85 @@ NorFlashWriteSingleBlock (
return EFI_BAD_BUFFER_SIZE;
}
- // Pick 128bytes as a good start for word operations as opposed to erasing the
- // block and writing the data regardless if an erase is really needed.
- // It looks like most individual NV variable writes are smaller than 128bytes.
- if (*NumBytes <= 128) {
+ // Pick P30_MAX_BUFFER_SIZE_IN_BYTES (== 128 bytes) as a good start for word
+ // operations as opposed to erasing the block and writing the data regardless
+ // if an erase is really needed. It looks like most individual NV variable
+ // writes are smaller than 128 bytes.
+ // To avoid pathological cases were a 2 byte write is disregarded because it
+ // occurs right at a 128 byte buffered write alignment boundary, permit up to
+ // twice the max buffer size, and perform two writes if needed.
+ if ((*NumBytes + (Offset & BOUNDARY_OF_32_WORDS)) <= (2 * P30_MAX_BUFFER_SIZE_IN_BYTES)) {
// Check to see if we need to erase before programming the data into NOR.
// If the destination bits are only changing from 1s to 0s we can just write.
// After a block is erased all bits in the block is set to 1.
// If any byte requires us to erase we just give up and rewrite all of it.
- DoErase = FALSE;
- BytesToWrite = *NumBytes;
- CurOffset = Offset;
- while (BytesToWrite > 0) {
- // Read full word from NOR, splice as required. A word is the smallest
- // unit we can write.
- TempStatus = NorFlashRead (Instance, Lba, CurOffset & ~(0x3), sizeof (Tmp), &Tmp);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- // Physical address of word in NOR to write.
- WordAddr = (CurOffset & ~(0x3)) + GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Lba,
- BlockSize
- );
- // The word of data that is to be written.
- TmpBuf = *((UINT32 *)(Buffer + (*NumBytes - BytesToWrite)));
-
- // First do word aligned chunks.
- if ((CurOffset & 0x3) == 0) {
- if (BytesToWrite >= 4) {
- // Is the destination still in 'erased' state?
- if (~Tmp != 0) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Write this word to NOR
- WordToWrite = TmpBuf;
- CurOffset += sizeof (TmpBuf);
- BytesToWrite -= sizeof (TmpBuf);
- } else {
- // BytesToWrite < 4. Do small writes and left-overs
- Mask = ~((~0) << (BytesToWrite * 8));
- // Mask out the bytes we want.
- TmpBuf &= Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- CurOffset += BytesToWrite;
- BytesToWrite = 0;
- }
- } else {
- // Do multiple words, but starting unaligned.
- if (BytesToWrite > (4 - (CurOffset & 0x3))) {
- Mask = ((~0) << ((CurOffset & 0x3) * 8));
- // Mask out the bytes we want.
- TmpBuf &= Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
+ // Read the old version of the data into the shadow buffer
+ Status = NorFlashRead (
+ Instance,
+ Lba,
+ Offset & ~BOUNDARY_OF_32_WORDS,
+ (*NumBytes | BOUNDARY_OF_32_WORDS) + 1,
+ Instance->ShadowBuffer
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- BytesToWrite -= (4 - (CurOffset & 0x3));
- CurOffset += (4 - (CurOffset & 0x3));
- } else {
- // Unaligned and fits in one word.
- Mask = (~((~0) << (BytesToWrite * 8))) << ((CurOffset & 0x3) * 8);
- // Mask out the bytes we want.
- TmpBuf = (TmpBuf << ((CurOffset & 0x3) * 8)) & Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
+ // Make OrigData point to the start of the old version of the data inside
+ // the word aligned buffer
+ OrigData = Instance->ShadowBuffer + (Offset & BOUNDARY_OF_32_WORDS);
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- CurOffset += BytesToWrite;
- BytesToWrite = 0;
- }
+ // Update the buffer containing the old version of the data with the new
+ // contents, while checking whether the old version had any bits cleared
+ // that we want to set. In that case, we will need to erase the block first.
+ for (CurOffset = 0; CurOffset < *NumBytes; CurOffset++) {
+ if (~OrigData[CurOffset] & Buffer[CurOffset]) {
+ goto DoErase;
}
+ OrigData[CurOffset] = Buffer[CurOffset];
+ }
- //
- // Write the word to NOR.
- //
-
- BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSize);
- if (BlockAddress != PrevBlockAddress) {
- TempStatus = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
+ //
+ // Write the updated buffer to NOR.
+ //
+ BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSize);
- PrevBlockAddress = BlockAddress;
- }
+ // Unlock the block if we have to
+ Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
- TempStatus = NorFlashWriteSingleWord (Instance, WordAddr, WordToWrite);
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
+ Status = NorFlashWriteBuffer (
+ Instance,
+ BlockAddress + (Offset & ~BOUNDARY_OF_32_WORDS),
+ P30_MAX_BUFFER_SIZE_IN_BYTES,
+ Instance->ShadowBuffer);
+ if (EFI_ERROR (Status)) {
+ goto Exit;
}
- // Exit if we got here and could write all the data. Otherwise do the
- // Erase-Write cycle.
- if (!DoErase) {
- return EFI_SUCCESS;
+ if ((*NumBytes + (Offset & BOUNDARY_OF_32_WORDS)) > P30_MAX_BUFFER_SIZE_IN_BYTES) {
+ BlockAddress += P30_MAX_BUFFER_SIZE_IN_BYTES;
+ Status = NorFlashWriteBuffer (
+ Instance,
+ BlockAddress + (Offset & ~BOUNDARY_OF_32_WORDS),
+ P30_MAX_BUFFER_SIZE_IN_BYTES,
+ Instance->ShadowBuffer + P30_MAX_BUFFER_SIZE_IN_BYTES);
}
- }
- // Check we did get some memory. Buffer is BlockSize.
- if (Instance->ShadowBuffer == NULL) {
- DEBUG ((DEBUG_ERROR, "FvbWrite: ERROR - Buffer not ready\n"));
- return EFI_DEVICE_ERROR;
+Exit:
+ // Put device back into Read Array mode
+ SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
+
+ return Status;
}
+DoErase:
// Read NOR Flash data into shadow buffer
- TempStatus = NorFlashReadBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
- if (EFI_ERROR (TempStatus)) {
+ Status = NorFlashReadBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
+ if (EFI_ERROR (Status)) {
// Return one of the pre-approved error statuses
return EFI_DEVICE_ERROR;
}
@@ -762,8 +696,8 @@ NorFlashWriteSingleBlock (
CopyMem ((VOID *)((UINTN)Instance->ShadowBuffer + Offset), Buffer, *NumBytes);
// Write the modified buffer back to the NorFlash
- TempStatus = NorFlashWriteBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
- if (EFI_ERROR (TempStatus)) {
+ Status = NorFlashWriteBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
+ if (EFI_ERROR (Status)) {
// Return one of the pre-approved error statuses
return EFI_DEVICE_ERROR;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 08/11] OvmfPkg/VirtNorFlashDxe: use EFI_MEMORY_WC and drop AlignedCopyMem()
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (6 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 07/11] OvmfPkg/VirtNorFlashDxe: avoid switching between modes in a tight loop Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 09/11] ArmVirtPkg/ArmVirtQemu: migrate to OVMF's VirtNorFlashDxe Ard Biesheuvel
` (4 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
NOR flash emulation under KVM involves switching between two modes,
where array mode is backed by a read-only memslot, and programming mode
is fully emulated, i.e., the memory region is not backed by anything,
and the faulting accesses are forwarded to the VMM by the hypervisor,
which translates them into NOR flash programming commands.
Normally, we are limited to the use of device attributes when mapping
such regions, given that the programming mode has MMIO semantics.
However, when running under KVM, the chosen memory attributes only take
effect when in array mode, since no memory mapping exists otherwise.
This means we can tune the memory mapping so it behaves a bit more like
a ROM, by switching to EFI_MEMORY_WC attributes. This means we no longer
need a special CopyMem() implementation that avoids unaligned accesses
at all cost.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c | 65 +-------------------
OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c | 4 +-
2 files changed, 4 insertions(+), 65 deletions(-)
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
index d87cdd49d6a6..392e17988472 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlash.c
@@ -401,67 +401,6 @@ NorFlashWriteBlocks (
return Status;
}
-#define BOTH_ALIGNED(a, b, align) ((((UINTN)(a) | (UINTN)(b)) & ((align) - 1)) == 0)
-
-/**
- Copy Length bytes from Source to Destination, using aligned accesses only.
- Note that this implementation uses memcpy() semantics rather then memmove()
- semantics, i.e., SourceBuffer and DestinationBuffer should not overlap.
-
- @param DestinationBuffer The target of the copy request.
- @param SourceBuffer The place to copy from.
- @param Length The number of bytes to copy.
-
- @return Destination
-
-**/
-STATIC
-VOID *
-AlignedCopyMem (
- OUT VOID *DestinationBuffer,
- IN CONST VOID *SourceBuffer,
- IN UINTN Length
- )
-{
- UINT8 *Destination8;
- CONST UINT8 *Source8;
- UINT32 *Destination32;
- CONST UINT32 *Source32;
- UINT64 *Destination64;
- CONST UINT64 *Source64;
-
- if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 8) && (Length >= 8)) {
- Destination64 = DestinationBuffer;
- Source64 = SourceBuffer;
- while (Length >= 8) {
- *Destination64++ = *Source64++;
- Length -= 8;
- }
-
- Destination8 = (UINT8 *)Destination64;
- Source8 = (CONST UINT8 *)Source64;
- } else if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 4) && (Length >= 4)) {
- Destination32 = DestinationBuffer;
- Source32 = SourceBuffer;
- while (Length >= 4) {
- *Destination32++ = *Source32++;
- Length -= 4;
- }
-
- Destination8 = (UINT8 *)Destination32;
- Source8 = (CONST UINT8 *)Source32;
- } else {
- Destination8 = DestinationBuffer;
- Source8 = SourceBuffer;
- }
-
- while (Length-- != 0) {
- *Destination8++ = *Source8++;
- }
-
- return DestinationBuffer;
-}
-
EFI_STATUS
NorFlashReadBlocks (
IN NOR_FLASH_INSTANCE *Instance,
@@ -516,7 +455,7 @@ NorFlashReadBlocks (
SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
// Readout the data
- AlignedCopyMem (Buffer, (VOID *)StartAddress, BufferSizeInBytes);
+ CopyMem (Buffer, (VOID *)StartAddress, BufferSizeInBytes);
return EFI_SUCCESS;
}
@@ -558,7 +497,7 @@ NorFlashRead (
SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
// Readout the data
- AlignedCopyMem (Buffer, (VOID *)(StartAddress + Offset), BufferSizeInBytes);
+ CopyMem (Buffer, (VOID *)(StartAddress + Offset), BufferSizeInBytes);
return EFI_SUCCESS;
}
diff --git a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
index f9a41f6aab0f..ff3121af2a40 100644
--- a/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
+++ b/OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.c
@@ -394,14 +394,14 @@ NorFlashFvbInitialize (
EfiGcdMemoryTypeMemoryMappedIo,
Instance->DeviceBaseAddress,
RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ EFI_MEMORY_WC | EFI_MEMORY_RUNTIME
);
ASSERT_EFI_ERROR (Status);
Status = gDS->SetMemorySpaceAttributes (
Instance->DeviceBaseAddress,
RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ EFI_MEMORY_WC | EFI_MEMORY_RUNTIME
);
ASSERT_EFI_ERROR (Status);
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 09/11] ArmVirtPkg/ArmVirtQemu: migrate to OVMF's VirtNorFlashDxe
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (7 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 08/11] OvmfPkg/VirtNorFlashDxe: use EFI_MEMORY_WC and drop AlignedCopyMem() Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 10/11] ArmVirtPkg/ArmVirtKvmTool: Migrate " Ard Biesheuvel
` (3 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
Switch to the virt specific NorFlashDxe driver implementation that was
added recently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
ArmVirtPkg/ArmVirtQemu.dsc | 4 ++--
ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc | 2 +-
ArmVirtPkg/ArmVirtQemuKernel.dsc | 4 ++--
ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 12 ++++++------
ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 4 ++--
5 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
index 9369a88858fd..a13297997434 100644
--- a/ArmVirtPkg/ArmVirtQemu.dsc
+++ b/ArmVirtPkg/ArmVirtQemu.dsc
@@ -67,7 +67,7 @@ [LibraryClasses.common]
ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf
TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
- NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
+ VirtNorFlashPlatformLib|ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
@@ -397,7 +397,7 @@ [Components.common]
<LibraryClasses>
NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
}
- ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+ OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
#
diff --git a/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc b/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc
index d4df6dede0fe..771921dffd74 100644
--- a/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc
+++ b/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc
@@ -73,7 +73,7 @@ [FV.FvMain]
INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
- INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+ INF OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
#
diff --git a/ArmVirtPkg/ArmVirtQemuKernel.dsc b/ArmVirtPkg/ArmVirtQemuKernel.dsc
index 7f7d15d6eee3..5bf6c02a3141 100644
--- a/ArmVirtPkg/ArmVirtQemuKernel.dsc
+++ b/ArmVirtPkg/ArmVirtQemuKernel.dsc
@@ -65,7 +65,7 @@ [LibraryClasses.common]
ArmVirtMemInfoLib|ArmVirtPkg/Library/QemuVirtMemInfoLib/QemuVirtMemInfoLib.inf
TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
- NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
+ VirtNorFlashPlatformLib|ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
@@ -331,7 +331,7 @@ [Components.common]
<LibraryClasses>
NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
}
- ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+ OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
#
diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c
index 2b39f021d0ae..55bce88bc8dd 100644
--- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c
+++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c
@@ -8,8 +8,8 @@
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
-#include <Library/NorFlashPlatformLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Library/VirtNorFlashPlatformLib.h>
#include <Protocol/FdtClient.h>
@@ -18,19 +18,19 @@
#define MAX_FLASH_BANKS 4
EFI_STATUS
-NorFlashPlatformInitialization (
+VirtNorFlashPlatformInitialization (
VOID
)
{
return EFI_SUCCESS;
}
-NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS];
+STATIC VIRT_NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS];
EFI_STATUS
-NorFlashPlatformGetDevices (
- OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
- OUT UINT32 *Count
+VirtNorFlashPlatformGetDevices (
+ OUT VIRT_NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
+ OUT UINT32 *Count
)
{
FDT_CLIENT_PROTOCOL *FdtClient;
diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
index 4c3683bf5d0d..a6b5865be91c 100644
--- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
+++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
@@ -14,17 +14,17 @@ [Defines]
FILE_GUID = 339B7829-4C5F-4EFC-B2DD-5050E530DECE
MODULE_TYPE = DXE_DRIVER
VERSION_STRING = 1.0
- LIBRARY_CLASS = NorFlashPlatformLib
+ LIBRARY_CLASS = VirtNorFlashPlatformLib
[Sources.common]
NorFlashQemuLib.c
[Packages]
MdePkg/MdePkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
ArmPkg/ArmPkg.dec
ArmVirtPkg/ArmVirtPkg.dec
EmbeddedPkg/EmbeddedPkg.dec
+ OvmfPkg/OvmfPkg.dec
[LibraryClasses]
BaseLib
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 10/11] ArmVirtPkg/ArmVirtKvmTool: Migrate to OVMF's VirtNorFlashDxe
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (8 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 09/11] ArmVirtPkg/ArmVirtQemu: migrate to OVMF's VirtNorFlashDxe Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-24 17:01 ` [PATCH 11/11] ArmPlatformPkg: Retire NorFlashDxe driver Ard Biesheuvel
` (2 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
Migrate to the virt specific NOR flash driver as the ArmPlatformPkg is
going away.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
ArmVirtPkg/ArmVirtKvmTool.dsc | 4 ++--
ArmVirtPkg/ArmVirtKvmTool.fdf | 2 +-
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 20 ++++++++++----------
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 4 ++--
4 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
index 3bd3ebd6e0b3..c598903b33d2 100644
--- a/ArmVirtPkg/ArmVirtKvmTool.dsc
+++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
@@ -50,7 +50,7 @@ [LibraryClasses.common]
ArmVirtMemInfoLib|ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
- NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+ VirtNorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
@@ -291,7 +291,7 @@ [Components.common]
NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
}
- ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+ OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
diff --git a/ArmVirtPkg/ArmVirtKvmTool.fdf b/ArmVirtPkg/ArmVirtKvmTool.fdf
index 9e006e83ee5c..b696bffc7ccb 100644
--- a/ArmVirtPkg/ArmVirtKvmTool.fdf
+++ b/ArmVirtPkg/ArmVirtKvmTool.fdf
@@ -154,7 +154,7 @@ [FV.FvMain]
INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
- INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+ INF OvmfPkg/VirtNorFlashDxe/VirtNorFlashDxe.inf
#
# FAT filesystem + GPT/MBR partitioning + UDF filesystem
diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
index 39d2615b5409..129c16b7110c 100644
--- a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
+++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
@@ -9,8 +9,8 @@
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
-#include <Library/NorFlashPlatformLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Library/VirtNorFlashPlatformLib.h>
#include <Protocol/FdtClient.h>
/** Macro defining the NOR block size configured in Kvmtool.
@@ -25,10 +25,10 @@
*/
#define LABEL_UEFI_VAR_STORE "System-firmware"
-STATIC NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_DEVICES];
-STATIC UINTN mNorFlashDeviceCount = 0;
-STATIC INT32 mUefiVarStoreNode = MAX_INT32;
-STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
+STATIC VIRT_NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_DEVICES];
+STATIC UINTN mNorFlashDeviceCount = 0;
+STATIC INT32 mUefiVarStoreNode = MAX_INT32;
+STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
/** This function performs platform specific actions to initialise
the NOR flash, if required.
@@ -36,7 +36,7 @@ STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
@retval EFI_SUCCESS Success.
**/
EFI_STATUS
-NorFlashPlatformInitialization (
+VirtNorFlashPlatformInitialization (
VOID
)
{
@@ -89,7 +89,7 @@ NorFlashPlatformInitialization (
STATIC
EFI_STATUS
SetupVariableStore (
- IN NOR_FLASH_DESCRIPTION *FlashDevice
+ IN VIRT_NOR_FLASH_DESCRIPTION *FlashDevice
)
{
UINTN FlashRegion;
@@ -187,9 +187,9 @@ SetupVariableStore (
@retval EFI_NOT_FOUND Flash device not found.
**/
EFI_STATUS
-NorFlashPlatformGetDevices (
- OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
- OUT UINT32 *Count
+VirtNorFlashPlatformGetDevices (
+ OUT VIRT_NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
+ OUT UINT32 *Count
)
{
if (mNorFlashDeviceCount > 0) {
diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
index 04d672329537..b5f35d478289 100644
--- a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
@@ -12,7 +12,7 @@ [Defines]
FILE_GUID = E75F07A1-B160-4893-BDD4-09E32FF847DC
MODULE_TYPE = DXE_DRIVER
VERSION_STRING = 1.0
- LIBRARY_CLASS = NorFlashPlatformLib
+ LIBRARY_CLASS = VirtNorFlashPlatformLib
CONSTRUCTOR = NorFlashPlatformLibConstructor
[Sources.common]
@@ -20,11 +20,11 @@ [Sources.common]
[Packages]
ArmPkg/ArmPkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
ArmVirtPkg/ArmVirtPkg.dec
EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
+ OvmfPkg/OvmfPkg.dec
[LibraryClasses]
BaseLib
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 11/11] ArmPlatformPkg: Retire NorFlashDxe driver
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (9 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 10/11] ArmVirtPkg/ArmVirtKvmTool: Migrate " Ard Biesheuvel
@ 2022-10-24 17:01 ` Ard Biesheuvel
2022-10-25 16:32 ` Leif Lindholm
2022-10-27 4:47 ` [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Sunil V L
2024-12-16 6:48 ` [edk2-devel] " wanglimin
12 siblings, 1 reply; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-24 17:01 UTC (permalink / raw)
To: devel; +Cc: Ard Biesheuvel, Gerd Hoffmann, Sunil V L, Sami Mujawar,
Leif Lindholm
The NorFlashDxe driver in ArmPlatformPkg was shared between development
platforms built by ARM Ltd, and virtual platforms that were once modeled
after Versatile Express, but have very little in common with actual bare
metal implementations.
Both sides have migrated to a domain specific version of the driver, so
we can retire the old one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
ArmPlatformPkg/ArmPlatformPkg.dec | 6 -
ArmPlatformPkg/ArmPlatformPkg.dsc | 6 -
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c | 991 --------------------
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h | 422 ---------
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c | 123 ---
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c | 506 ----------
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf | 71 --
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c | 777 ---------------
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c | 383 --------
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf | 66 --
ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h | 30 -
ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c | 28 -
ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf | 24 -
13 files changed, 3433 deletions(-)
diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec b/ArmPlatformPkg/ArmPlatformPkg.dec
index dd6e78f62aa1..7b5d7e6cb520 100644
--- a/ArmPlatformPkg/ArmPlatformPkg.dec
+++ b/ArmPlatformPkg/ArmPlatformPkg.dec
@@ -38,10 +38,6 @@ [LibraryClasses]
#
LcdPlatformLib|Include/Library/LcdPlatformLib.h
- ## @libraryclass Provides a Nor flash interface.
- #
- NorFlashPlatformLib|Include/Library/NorFlashPlatformLib.h
-
## @libraryclass Provides an interface to the clock of a PL011 device.
#
PL011UartClockLib|Include/Library/PL011UartClockLib.h
@@ -56,8 +52,6 @@ [Guids.common]
[PcdsFeatureFlag.common]
gArmPlatformTokenSpaceGuid.PcdSendSgiToBringUpSecondaryCores|FALSE|BOOLEAN|0x00000004
- gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked|FALSE|BOOLEAN|0x0000003C
-
# Disable the GOP controller on ExitBootServices(). By default the value is FALSE,
# we assume the OS will handle the FrameBuffer from the UEFI GOP information.
gArmPlatformTokenSpaceGuid.PcdGopDisableOnExitBootServices|FALSE|BOOLEAN|0x0000003D
diff --git a/ArmPlatformPkg/ArmPlatformPkg.dsc b/ArmPlatformPkg/ArmPlatformPkg.dsc
index 661a4cea220d..ddd128f9e606 100644
--- a/ArmPlatformPkg/ArmPlatformPkg.dsc
+++ b/ArmPlatformPkg/ArmPlatformPkg.dsc
@@ -55,7 +55,6 @@ [LibraryClasses.common]
LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
- NorFlashPlatformLib|ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
@@ -100,7 +99,6 @@ [LibraryClasses.AARCH64.MM_STANDALONE]
[Components.common]
ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
- ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
@@ -109,7 +107,6 @@ [Components.common]
ArmPlatformPkg/Library/HdLcd/HdLcd.inf
ArmPlatformPkg/Library/LcdHwNullLib/LcdHwNullLib.inf
ArmPlatformPkg/Library/LcdPlatformNullLib/LcdPlatformNullLib.inf
- ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
@@ -130,6 +127,3 @@ [Components.common]
ArmPlatformPkg/PrePi/PeiUniCore.inf
ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
-
-[Components.AARCH64]
- ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c
deleted file mode 100644
index 1b431073ee93..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c
+++ /dev/null
@@ -1,991 +0,0 @@
-/** @file NorFlash.c
-
- Copyright (c) 2011 - 2020, Arm Limited. All rights reserved.<BR>
- Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/BaseMemoryLib.h>
-
-#include "NorFlash.h"
-
-//
-// Global variable declarations
-//
-extern NOR_FLASH_INSTANCE **mNorFlashInstances;
-extern UINT32 mNorFlashDeviceCount;
-
-UINT32
-NorFlashReadStatusRegister (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN SR_Address
- )
-{
- // Prepare to read the status register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_STATUS_REGISTER);
- return MmioRead32 (Instance->DeviceBaseAddress);
-}
-
-STATIC
-BOOLEAN
-NorFlashBlockIsLocked (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- UINT32 LockStatus;
-
- // Send command for reading device id
- SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
-
- // Read block lock status
- LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
-
- // Decode block lock status
- LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
-
- if ((LockStatus & 0x2) != 0) {
- DEBUG ((DEBUG_ERROR, "NorFlashBlockIsLocked: WARNING: Block LOCKED DOWN\n"));
- }
-
- return ((LockStatus & 0x1) != 0);
-}
-
-STATIC
-EFI_STATUS
-NorFlashUnlockSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- UINT32 LockStatus;
-
- // Raise the Task Priority Level to TPL_NOTIFY to serialise all its operations
- // and to protect shared data structures.
-
- if (FeaturePcdGet (PcdNorFlashCheckBlockLocked) == TRUE) {
- do {
- // Request a lock setup
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
-
- // Request an unlock
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
-
- // Send command for reading device id
- SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
-
- // Read block lock status
- LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
-
- // Decode block lock status
- LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
- } while ((LockStatus & 0x1) == 1);
- } else {
- // Request a lock setup
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
-
- // Request an unlock
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
-
- // Wait until the status register gives us the all clear
- do {
- LockStatus = NorFlashReadStatusRegister (Instance, BlockAddress);
- } while ((LockStatus & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
- }
-
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_READ_ARRAY);
-
- DEBUG ((DEBUG_BLKIO, "UnlockSingleBlock: BlockAddress=0x%08x\n", BlockAddress));
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashUnlockSingleBlockIfNecessary (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
-
- Status = EFI_SUCCESS;
-
- if (NorFlashBlockIsLocked (Instance, BlockAddress)) {
- Status = NorFlashUnlockSingleBlock (Instance, BlockAddress);
- }
-
- return Status;
-}
-
-/**
- * The following function presumes that the block has already been unlocked.
- **/
-EFI_STATUS
-NorFlashEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
- UINT32 StatusRegister;
-
- Status = EFI_SUCCESS;
-
- // Request a block erase and then confirm it
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_SETUP);
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_CONFIRM);
-
- // Wait until the status register gives us the all clear
- do {
- StatusRegister = NorFlashReadStatusRegister (Instance, BlockAddress);
- } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
- if (StatusRegister & P30_SR_BIT_VPP) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: VPP Range Error\n", BlockAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if ((StatusRegister & (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) == (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Command Sequence Error\n", BlockAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_ERASE) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Erase Error StatusRegister:0x%X\n", BlockAddress, StatusRegister));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
- // The debug level message has been reduced because a device lock might happen. In this case we just retry it ...
- DEBUG ((DEBUG_INFO, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error\n", BlockAddress));
- Status = EFI_WRITE_PROTECTED;
- }
-
- if (EFI_ERROR (Status)) {
- // Clear the Status Register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
- }
-
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteSingleWord (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN WordAddress,
- IN UINT32 WriteData
- )
-{
- EFI_STATUS Status;
- UINT32 StatusRegister;
-
- Status = EFI_SUCCESS;
-
- // Request a write single word command
- SEND_NOR_COMMAND (WordAddress, 0, P30_CMD_WORD_PROGRAM_SETUP);
-
- // Store the word into NOR Flash;
- MmioWrite32 (WordAddress, WriteData);
-
- // Wait for the write to complete and then check for any errors; i.e. check the Status Register
- do {
- // Prepare to read the status register
- StatusRegister = NorFlashReadStatusRegister (Instance, WordAddress);
- // The chip is busy while the WRITE bit is not asserted
- } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
- // Perform a full status check:
- // Mask the relevant bits of Status Register.
- // Everything should be zero, if not, we have a problem
-
- if (StatusRegister & P30_SR_BIT_VPP) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): VPP Range Error\n", WordAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_PROGRAM) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Program Error\n", WordAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Device Protect Error\n", WordAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (!EFI_ERROR (Status)) {
- // Clear the Status Register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
- }
-
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- return Status;
-}
-
-/*
- * Writes data to the NOR Flash using the Buffered Programming method.
- *
- * The maximum size of the on-chip buffer is 32-words, because of hardware restrictions.
- * Therefore this function will only handle buffers up to 32 words or 128 bytes.
- * To deal with larger buffers, call this function again.
- *
- * This function presumes that both the TargetAddress and the TargetAddress+BufferSize
- * exist entirely within the NOR Flash. Therefore these conditions will not be checked here.
- *
- * In buffered programming, if the target address not at the beginning of a 32-bit word boundary,
- * then programming time is doubled and power consumption is increased.
- * Therefore, it is a requirement to align buffer writes to 32-bit word boundaries.
- * i.e. the last 4 bits of the target start address must be zero: 0x......00
- */
-EFI_STATUS
-NorFlashWriteBuffer (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN TargetAddress,
- IN UINTN BufferSizeInBytes,
- IN UINT32 *Buffer
- )
-{
- EFI_STATUS Status;
- UINTN BufferSizeInWords;
- UINTN Count;
- volatile UINT32 *Data;
- UINTN WaitForBuffer;
- BOOLEAN BufferAvailable;
- UINT32 StatusRegister;
-
- WaitForBuffer = MAX_BUFFERED_PROG_ITERATIONS;
- BufferAvailable = FALSE;
-
- // Check that the target address does not cross a 32-word boundary.
- if ((TargetAddress & BOUNDARY_OF_32_WORDS) != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- // Check there are some data to program
- if (BufferSizeInBytes == 0) {
- return EFI_BUFFER_TOO_SMALL;
- }
-
- // Check that the buffer size does not exceed the maximum hardware buffer size on chip.
- if (BufferSizeInBytes > P30_MAX_BUFFER_SIZE_IN_BYTES) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Check that the buffer size is a multiple of 32-bit words
- if ((BufferSizeInBytes % 4) != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Pre-programming conditions checked, now start the algorithm.
-
- // Prepare the data destination address
- Data = (UINT32 *)TargetAddress;
-
- // Check the availability of the buffer
- do {
- // Issue the Buffered Program Setup command
- SEND_NOR_COMMAND (TargetAddress, 0, P30_CMD_BUFFERED_PROGRAM_SETUP);
-
- // Read back the status register bit#7 from the same address
- if (((*Data) & P30_SR_BIT_WRITE) == P30_SR_BIT_WRITE) {
- BufferAvailable = TRUE;
- }
-
- // Update the loop counter
- WaitForBuffer--;
- } while ((WaitForBuffer > 0) && (BufferAvailable == FALSE));
-
- // The buffer was not available for writing
- if (WaitForBuffer == 0) {
- Status = EFI_DEVICE_ERROR;
- goto EXIT;
- }
-
- // From now on we work in 32-bit words
- BufferSizeInWords = BufferSizeInBytes / (UINTN)4;
-
- // Write the word count, which is (buffer_size_in_words - 1),
- // because word count 0 means one word.
- SEND_NOR_COMMAND (TargetAddress, 0, (BufferSizeInWords - 1));
-
- // Write the data to the NOR Flash, advancing each address by 4 bytes
- for (Count = 0; Count < BufferSizeInWords; Count++, Data++, Buffer++) {
- MmioWrite32 ((UINTN)Data, *Buffer);
- }
-
- // Issue the Buffered Program Confirm command, to start the programming operation
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_BUFFERED_PROGRAM_CONFIRM);
-
- // Wait for the write to complete and then check for any errors; i.e. check the Status Register
- do {
- StatusRegister = NorFlashReadStatusRegister (Instance, TargetAddress);
- // The chip is busy while the WRITE bit is not asserted
- } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
- // Perform a full status check:
- // Mask the relevant bits of Status Register.
- // Everything should be zero, if not, we have a problem
-
- Status = EFI_SUCCESS;
-
- if (StatusRegister & P30_SR_BIT_VPP) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): VPP Range Error\n", TargetAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_PROGRAM) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Program Error\n", TargetAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Device Protect Error\n", TargetAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (!EFI_ERROR (Status)) {
- // Clear the Status Register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
- }
-
-EXIT:
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- )
-{
- UINT32 *pWriteBuffer;
- EFI_STATUS Status;
- EFI_LBA CurrentBlock;
- UINT32 BlockSizeInWords;
- UINT32 NumBlocks;
- UINT32 BlockCount;
-
- Status = EFI_SUCCESS;
-
- // The buffer must be valid
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Instance->Media.ReadOnly == TRUE) {
- return EFI_WRITE_PROTECTED;
- }
-
- // We must have some bytes to read
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BufferSizeInBytes=0x%x\n", BufferSizeInBytes));
- if (BufferSizeInBytes == 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // The size of the buffer must be a multiple of the block size
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BlockSize in bytes =0x%x\n", Instance->Media.BlockSize));
- if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // All blocks must be within the device
- NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: NumBlocks=%d, LastBlock=%ld, Lba=%ld.\n", NumBlocks, Instance->Media.LastBlock, Lba));
-
- if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBlocks: ERROR - Write will exceed last block.\n"));
- return EFI_INVALID_PARAMETER;
- }
-
- BlockSizeInWords = Instance->Media.BlockSize / 4;
-
- // Because the target *Buffer is a pointer to VOID, we must put all the data into a pointer
- // to a proper data type, so use *ReadBuffer
- pWriteBuffer = (UINT32 *)Buffer;
-
- CurrentBlock = Lba;
- for (BlockCount = 0; BlockCount < NumBlocks; BlockCount++, CurrentBlock++, pWriteBuffer = pWriteBuffer + BlockSizeInWords) {
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Writing block #%d\n", (UINTN)CurrentBlock));
-
- Status = NorFlashWriteFullBlock (Instance, CurrentBlock, pWriteBuffer, BlockSizeInWords);
-
- if (EFI_ERROR (Status)) {
- break;
- }
- }
-
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Exit Status = \"%r\".\n", Status));
- return Status;
-}
-
-#define BOTH_ALIGNED(a, b, align) ((((UINTN)(a) | (UINTN)(b)) & ((align) - 1)) == 0)
-
-/**
- Copy Length bytes from Source to Destination, using aligned accesses only.
- Note that this implementation uses memcpy() semantics rather then memmove()
- semantics, i.e., SourceBuffer and DestinationBuffer should not overlap.
-
- @param DestinationBuffer The target of the copy request.
- @param SourceBuffer The place to copy from.
- @param Length The number of bytes to copy.
-
- @return Destination
-
-**/
-STATIC
-VOID *
-AlignedCopyMem (
- OUT VOID *DestinationBuffer,
- IN CONST VOID *SourceBuffer,
- IN UINTN Length
- )
-{
- UINT8 *Destination8;
- CONST UINT8 *Source8;
- UINT32 *Destination32;
- CONST UINT32 *Source32;
- UINT64 *Destination64;
- CONST UINT64 *Source64;
-
- if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 8) && (Length >= 8)) {
- Destination64 = DestinationBuffer;
- Source64 = SourceBuffer;
- while (Length >= 8) {
- *Destination64++ = *Source64++;
- Length -= 8;
- }
-
- Destination8 = (UINT8 *)Destination64;
- Source8 = (CONST UINT8 *)Source64;
- } else if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 4) && (Length >= 4)) {
- Destination32 = DestinationBuffer;
- Source32 = SourceBuffer;
- while (Length >= 4) {
- *Destination32++ = *Source32++;
- Length -= 4;
- }
-
- Destination8 = (UINT8 *)Destination32;
- Source8 = (CONST UINT8 *)Source32;
- } else {
- Destination8 = DestinationBuffer;
- Source8 = SourceBuffer;
- }
-
- while (Length-- != 0) {
- *Destination8++ = *Source8++;
- }
-
- return DestinationBuffer;
-}
-
-EFI_STATUS
-NorFlashReadBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- )
-{
- UINT32 NumBlocks;
- UINTN StartAddress;
-
- DEBUG ((
- DEBUG_BLKIO,
- "NorFlashReadBlocks: BufferSize=0x%xB BlockSize=0x%xB LastBlock=%ld, Lba=%ld.\n",
- BufferSizeInBytes,
- Instance->Media.BlockSize,
- Instance->Media.LastBlock,
- Lba
- ));
-
- // The buffer must be valid
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- // Return if we have not any byte to read
- if (BufferSizeInBytes == 0) {
- return EFI_SUCCESS;
- }
-
- // The size of the buffer must be a multiple of the block size
- if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // All blocks must be within the device
- NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
-
- if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
- DEBUG ((DEBUG_ERROR, "NorFlashReadBlocks: ERROR - Read will exceed last block\n"));
- return EFI_INVALID_PARAMETER;
- }
-
- // Get the address to start reading from
- StartAddress = GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Lba,
- Instance->Media.BlockSize
- );
-
- // Put the device into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- // Readout the data
- AlignedCopyMem (Buffer, (VOID *)StartAddress, BufferSizeInBytes);
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashRead (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- )
-{
- UINTN StartAddress;
-
- // The buffer must be valid
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- // Return if we have not any byte to read
- if (BufferSizeInBytes == 0) {
- return EFI_SUCCESS;
- }
-
- if (((Lba * Instance->Media.BlockSize) + Offset + BufferSizeInBytes) > Instance->Size) {
- DEBUG ((DEBUG_ERROR, "NorFlashRead: ERROR - Read will exceed device size.\n"));
- return EFI_INVALID_PARAMETER;
- }
-
- // Get the address to start reading from
- StartAddress = GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Lba,
- Instance->Media.BlockSize
- );
-
- // Put the device into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- // Readout the data
- AlignedCopyMem (Buffer, (VOID *)(StartAddress + Offset), BufferSizeInBytes);
-
- return EFI_SUCCESS;
-}
-
-/*
- Write a full or portion of a block. It must not span block boundaries; that is,
- Offset + *NumBytes <= Instance->Media.BlockSize.
-*/
-EFI_STATUS
-NorFlashWriteSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- )
-{
- EFI_STATUS TempStatus;
- UINT32 Tmp;
- UINT32 TmpBuf;
- UINT32 WordToWrite;
- UINT32 Mask;
- BOOLEAN DoErase;
- UINTN BytesToWrite;
- UINTN CurOffset;
- UINTN WordAddr;
- UINTN BlockSize;
- UINTN BlockAddress;
- UINTN PrevBlockAddress;
-
- PrevBlockAddress = 0;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteSingleBlock(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Lba, Offset, *NumBytes, Buffer));
-
- // Detect WriteDisabled state
- if (Instance->Media.ReadOnly == TRUE) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - Can not write: Device is in WriteDisabled state.\n"));
- // It is in WriteDisabled state, return an error right away
- return EFI_ACCESS_DENIED;
- }
-
- // Cache the block size to avoid de-referencing pointers all the time
- BlockSize = Instance->Media.BlockSize;
-
- // The write must not span block boundaries.
- // We need to check each variable individually because adding two large values together overflows.
- if ((Offset >= BlockSize) ||
- (*NumBytes > BlockSize) ||
- ((Offset + *NumBytes) > BlockSize))
- {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // We must have some bytes to write
- if (*NumBytes == 0) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Pick 128bytes as a good start for word operations as opposed to erasing the
- // block and writing the data regardless if an erase is really needed.
- // It looks like most individual NV variable writes are smaller than 128bytes.
- if (*NumBytes <= 128) {
- // Check to see if we need to erase before programming the data into NOR.
- // If the destination bits are only changing from 1s to 0s we can just write.
- // After a block is erased all bits in the block is set to 1.
- // If any byte requires us to erase we just give up and rewrite all of it.
- DoErase = FALSE;
- BytesToWrite = *NumBytes;
- CurOffset = Offset;
-
- while (BytesToWrite > 0) {
- // Read full word from NOR, splice as required. A word is the smallest
- // unit we can write.
- TempStatus = NorFlashRead (Instance, Lba, CurOffset & ~(0x3), sizeof (Tmp), &Tmp);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- // Physical address of word in NOR to write.
- WordAddr = (CurOffset & ~(0x3)) + GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Lba,
- BlockSize
- );
- // The word of data that is to be written.
- TmpBuf = *((UINT32 *)(Buffer + (*NumBytes - BytesToWrite)));
-
- // First do word aligned chunks.
- if ((CurOffset & 0x3) == 0) {
- if (BytesToWrite >= 4) {
- // Is the destination still in 'erased' state?
- if (~Tmp != 0) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Write this word to NOR
- WordToWrite = TmpBuf;
- CurOffset += sizeof (TmpBuf);
- BytesToWrite -= sizeof (TmpBuf);
- } else {
- // BytesToWrite < 4. Do small writes and left-overs
- Mask = ~((~0) << (BytesToWrite * 8));
- // Mask out the bytes we want.
- TmpBuf &= Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- CurOffset += BytesToWrite;
- BytesToWrite = 0;
- }
- } else {
- // Do multiple words, but starting unaligned.
- if (BytesToWrite > (4 - (CurOffset & 0x3))) {
- Mask = ((~0) << ((CurOffset & 0x3) * 8));
- // Mask out the bytes we want.
- TmpBuf &= Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- BytesToWrite -= (4 - (CurOffset & 0x3));
- CurOffset += (4 - (CurOffset & 0x3));
- } else {
- // Unaligned and fits in one word.
- Mask = (~((~0) << (BytesToWrite * 8))) << ((CurOffset & 0x3) * 8);
- // Mask out the bytes we want.
- TmpBuf = (TmpBuf << ((CurOffset & 0x3) * 8)) & Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- CurOffset += BytesToWrite;
- BytesToWrite = 0;
- }
- }
-
- //
- // Write the word to NOR.
- //
-
- BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSize);
- if (BlockAddress != PrevBlockAddress) {
- TempStatus = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- PrevBlockAddress = BlockAddress;
- }
-
- TempStatus = NorFlashWriteSingleWord (Instance, WordAddr, WordToWrite);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
- }
-
- // Exit if we got here and could write all the data. Otherwise do the
- // Erase-Write cycle.
- if (!DoErase) {
- return EFI_SUCCESS;
- }
- }
-
- // Check we did get some memory. Buffer is BlockSize.
- if (Instance->ShadowBuffer == NULL) {
- DEBUG ((DEBUG_ERROR, "FvbWrite: ERROR - Buffer not ready\n"));
- return EFI_DEVICE_ERROR;
- }
-
- // Read NOR Flash data into shadow buffer
- TempStatus = NorFlashReadBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
- if (EFI_ERROR (TempStatus)) {
- // Return one of the pre-approved error statuses
- return EFI_DEVICE_ERROR;
- }
-
- // Put the data at the appropriate location inside the buffer area
- CopyMem ((VOID *)((UINTN)Instance->ShadowBuffer + Offset), Buffer, *NumBytes);
-
- // Write the modified buffer back to the NorFlash
- TempStatus = NorFlashWriteBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
- if (EFI_ERROR (TempStatus)) {
- // Return one of the pre-approved error statuses
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-/*
- Although DiskIoDxe will automatically install the DiskIO protocol whenever
- we install the BlockIO protocol, its implementation is sub-optimal as it reads
- and writes entire blocks using the BlockIO protocol. In fact we can access
- NOR flash with a finer granularity than that, so we can improve performance
- by directly producing the DiskIO protocol.
-*/
-
-/**
- Read BufferSize bytes from Offset into Buffer.
-
- @param This Protocol instance pointer.
- @param MediaId Id of the media, changes every time the media is replaced.
- @param Offset The starting byte offset to read from
- @param BufferSize Size of Buffer
- @param Buffer Buffer containing read data
-
- @retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
- return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
-}
-
-/**
- Writes a specified number of bytes to a device.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to be written.
- @param Offset The starting byte offset on the logical block I/O device to write.
- @param BufferSize The size in bytes of Buffer. The number of bytes to write to the device.
- @param Buffer A pointer to the buffer containing the data to be written.
-
- @retval EFI_SUCCESS The data was written correctly to the device.
- @retval EFI_WRITE_PROTECTED The device can not be written to.
- @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
- UINTN RemainingBytes;
- UINTN WriteSize;
- EFI_STATUS Status;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
- RemainingBytes = BufferSize;
-
- // Write either all the remaining bytes, or the number of bytes that bring
- // us up to a block boundary, whichever is less.
- // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
- // block boundary (even if it is already on one).
- WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset);
-
- do {
- if (WriteSize == BlockSize) {
- // Write a full block
- Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32));
- } else {
- // Write a partial block
- Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer);
- }
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Now continue writing either all the remaining bytes or single blocks.
- RemainingBytes -= WriteSize;
- Buffer = (UINT8 *)Buffer + WriteSize;
- Lba++;
- BlockOffset = 0;
- WriteSize = MIN (RemainingBytes, BlockSize);
- } while (RemainingBytes);
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashReset (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- // As there is no specific RESET to perform, ensure that the devices is in the default Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
- return EFI_SUCCESS;
-}
-
-/**
- Fixup internal data so that EFI can be call in virtual mode.
- Call the passed in Child Notify event and convert any pointers in
- lib to virtual mode.
-
- @param[in] Event The Event that is being processed
- @param[in] Context Event Context
-**/
-VOID
-EFIAPI
-NorFlashVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- UINTN Index;
-
- for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->DeviceBaseAddress);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->RegionBaseAddress);
-
- // Convert BlockIo protocol
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.FlushBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.ReadBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.Reset);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.WriteBlocks);
-
- // Convert Fvb
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.EraseBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetAttributes);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetBlockSize);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetPhysicalAddress);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Read);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.SetAttributes);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Write);
-
- if (mNorFlashInstances[Index]->ShadowBuffer != NULL) {
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->ShadowBuffer);
- }
- }
-
- return;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h
deleted file mode 100644
index c83032e87d9c..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h
+++ /dev/null
@@ -1,422 +0,0 @@
-/** @file NorFlash.h
-
- Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __NOR_FLASH_H__
-#define __NOR_FLASH_H__
-
-#include <Base.h>
-#include <PiDxe.h>
-
-#include <Guid/EventGroup.h>
-
-#include <Protocol/BlockIo.h>
-#include <Protocol/DiskIo.h>
-#include <Protocol/FirmwareVolumeBlock.h>
-
-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>
-#include <Library/NorFlashPlatformLib.h>
-#include <Library/UefiLib.h>
-#include <Library/UefiRuntimeLib.h>
-
-#define NOR_FLASH_ERASE_RETRY 10
-
-// Device access macros
-// These are necessary because we use 2 x 16bit parts to make up 32bit data
-
-#define HIGH_16_BITS 0xFFFF0000
-#define LOW_16_BITS 0x0000FFFF
-#define LOW_8_BITS 0x000000FF
-
-#define FOLD_32BIT_INTO_16BIT(value) ( ( value >> 16 ) | ( value & LOW_16_BITS ) )
-
-#define GET_LOW_BYTE(value) ( value & LOW_8_BITS )
-#define GET_HIGH_BYTE(value) ( GET_LOW_BYTE( value >> 16 ) )
-
-// Each command must be sent simultaneously to both chips,
-// i.e. at the lower 16 bits AND at the higher 16 bits
-#define CREATE_NOR_ADDRESS(BaseAddr, OffsetAddr) ((BaseAddr) + ((OffsetAddr) << 2))
-#define CREATE_DUAL_CMD(Cmd) ( ( Cmd << 16) | ( Cmd & LOW_16_BITS) )
-#define SEND_NOR_COMMAND(BaseAddr, Offset, Cmd) MmioWrite32 (CREATE_NOR_ADDRESS(BaseAddr,Offset), CREATE_DUAL_CMD(Cmd))
-#define GET_NOR_BLOCK_ADDRESS(BaseAddr, Lba, LbaSize) ( BaseAddr + (UINTN)((Lba) * LbaSize) )
-
-// Status Register Bits
-#define P30_SR_BIT_WRITE (BIT7 << 16 | BIT7)
-#define P30_SR_BIT_ERASE_SUSPEND (BIT6 << 16 | BIT6)
-#define P30_SR_BIT_ERASE (BIT5 << 16 | BIT5)
-#define P30_SR_BIT_PROGRAM (BIT4 << 16 | BIT4)
-#define P30_SR_BIT_VPP (BIT3 << 16 | BIT3)
-#define P30_SR_BIT_PROGRAM_SUSPEND (BIT2 << 16 | BIT2)
-#define P30_SR_BIT_BLOCK_LOCKED (BIT1 << 16 | BIT1)
-#define P30_SR_BIT_BEFP (BIT0 << 16 | BIT0)
-
-// Device Commands for Intel StrataFlash(R) Embedded Memory (P30) Family
-
-// On chip buffer size for buffered programming operations
-// There are 2 chips, each chip can buffer up to 32 (16-bit)words, and each word is 2 bytes.
-// Therefore the total size of the buffer is 2 x 32 x 2 = 128 bytes
-#define P30_MAX_BUFFER_SIZE_IN_BYTES ((UINTN)128)
-#define P30_MAX_BUFFER_SIZE_IN_WORDS (P30_MAX_BUFFER_SIZE_IN_BYTES/((UINTN)4))
-#define MAX_BUFFERED_PROG_ITERATIONS 10000000
-#define BOUNDARY_OF_32_WORDS 0x7F
-
-// CFI Addresses
-#define P30_CFI_ADDR_QUERY_UNIQUE_QRY 0x10
-#define P30_CFI_ADDR_VENDOR_ID 0x13
-
-// CFI Data
-#define CFI_QRY 0x00595251
-
-// READ Commands
-#define P30_CMD_READ_DEVICE_ID 0x0090
-#define P30_CMD_READ_STATUS_REGISTER 0x0070
-#define P30_CMD_CLEAR_STATUS_REGISTER 0x0050
-#define P30_CMD_READ_ARRAY 0x00FF
-#define P30_CMD_READ_CFI_QUERY 0x0098
-
-// WRITE Commands
-#define P30_CMD_WORD_PROGRAM_SETUP 0x0040
-#define P30_CMD_ALTERNATE_WORD_PROGRAM_SETUP 0x0010
-#define P30_CMD_BUFFERED_PROGRAM_SETUP 0x00E8
-#define P30_CMD_BUFFERED_PROGRAM_CONFIRM 0x00D0
-#define P30_CMD_BEFP_SETUP 0x0080
-#define P30_CMD_BEFP_CONFIRM 0x00D0
-
-// ERASE Commands
-#define P30_CMD_BLOCK_ERASE_SETUP 0x0020
-#define P30_CMD_BLOCK_ERASE_CONFIRM 0x00D0
-
-// SUSPEND Commands
-#define P30_CMD_PROGRAM_OR_ERASE_SUSPEND 0x00B0
-#define P30_CMD_SUSPEND_RESUME 0x00D0
-
-// BLOCK LOCKING / UNLOCKING Commands
-#define P30_CMD_LOCK_BLOCK_SETUP 0x0060
-#define P30_CMD_LOCK_BLOCK 0x0001
-#define P30_CMD_UNLOCK_BLOCK 0x00D0
-#define P30_CMD_LOCK_DOWN_BLOCK 0x002F
-
-// PROTECTION Commands
-#define P30_CMD_PROGRAM_PROTECTION_REGISTER_SETUP 0x00C0
-
-// CONFIGURATION Commands
-#define P30_CMD_READ_CONFIGURATION_REGISTER_SETUP 0x0060
-#define P30_CMD_READ_CONFIGURATION_REGISTER 0x0003
-
-#define NOR_FLASH_SIGNATURE SIGNATURE_32('n', 'o', 'r', '0')
-#define INSTANCE_FROM_FVB_THIS(a) CR(a, NOR_FLASH_INSTANCE, FvbProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_BLKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, BlockIoProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_DISKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, DiskIoProtocol, NOR_FLASH_SIGNATURE)
-
-typedef struct _NOR_FLASH_INSTANCE NOR_FLASH_INSTANCE;
-
-#pragma pack (1)
-typedef struct {
- VENDOR_DEVICE_PATH Vendor;
- UINT8 Index;
- EFI_DEVICE_PATH_PROTOCOL End;
-} NOR_FLASH_DEVICE_PATH;
-#pragma pack ()
-
-struct _NOR_FLASH_INSTANCE {
- UINT32 Signature;
- EFI_HANDLE Handle;
-
- UINTN DeviceBaseAddress;
- UINTN RegionBaseAddress;
- UINTN Size;
- EFI_LBA StartLba;
-
- EFI_BLOCK_IO_PROTOCOL BlockIoProtocol;
- EFI_BLOCK_IO_MEDIA Media;
- EFI_DISK_IO_PROTOCOL DiskIoProtocol;
-
- EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL FvbProtocol;
- VOID *ShadowBuffer;
-
- NOR_FLASH_DEVICE_PATH DevicePath;
-};
-
-EFI_STATUS
-NorFlashReadCfiData (
- IN UINTN DeviceBaseAddress,
- IN UINTN CFI_Offset,
- IN UINT32 NumberOfBytes,
- OUT UINT32 *Data
- );
-
-EFI_STATUS
-NorFlashWriteBuffer (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN TargetAddress,
- IN UINTN BufferSizeInBytes,
- IN UINT32 *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This
- );
-
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.ReadDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- );
-
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.WriteDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- );
-
-//
-// NorFlashFvbDxe.c
-//
-
-EFI_STATUS
-EFIAPI
-FvbGetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- );
-
-EFI_STATUS
-EFIAPI
-FvbSetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- );
-
-EFI_STATUS
-EFIAPI
-FvbGetPhysicalAddress (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_PHYSICAL_ADDRESS *Address
- );
-
-EFI_STATUS
-EFIAPI
-FvbGetBlockSize (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- OUT UINTN *BlockSize,
- OUT UINTN *NumberOfBlocks
- );
-
-EFI_STATUS
-EFIAPI
-FvbRead (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN OUT UINT8 *Buffer
- );
-
-EFI_STATUS
-EFIAPI
-FvbWrite (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- );
-
-EFI_STATUS
-EFIAPI
-FvbEraseBlocks (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- ...
- );
-
-EFI_STATUS
-ValidateFvHeader (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-EFI_STATUS
-InitializeFvAndVariableStoreHeaders (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-VOID
-EFIAPI
-FvbVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- );
-
-//
-// NorFlashDxe.c
-//
-
-EFI_STATUS
-NorFlashWriteFullBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINT32 *DataBuffer,
- IN UINT32 BlockSizeInWords
- );
-
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- );
-
-EFI_STATUS
-NorFlashCreateInstance (
- IN UINTN NorFlashDeviceBase,
- IN UINTN NorFlashRegionBase,
- IN UINTN NorFlashSize,
- IN UINT32 Index,
- IN UINT32 BlockSize,
- IN BOOLEAN SupportFvb,
- OUT NOR_FLASH_INSTANCE **NorFlashInstance
- );
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-//
-// NorFlash.c
-//
-EFI_STATUS
-NorFlashWriteSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- );
-
-EFI_STATUS
-NorFlashWriteBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- );
-
-EFI_STATUS
-NorFlashReadBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- );
-
-EFI_STATUS
-NorFlashRead (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- );
-
-EFI_STATUS
-NorFlashWrite (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- );
-
-EFI_STATUS
-NorFlashReset (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-EFI_STATUS
-NorFlashEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- );
-
-EFI_STATUS
-NorFlashUnlockSingleBlockIfNecessary (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- );
-
-EFI_STATUS
-NorFlashWriteSingleWord (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN WordAddress,
- IN UINT32 WriteData
- );
-
-VOID
-EFIAPI
-NorFlashVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- );
-
-#endif /* __NOR_FLASH_H__ */
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
deleted file mode 100644
index 9d4732c6905a..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/** @file NorFlashBlockIoDxe.c
-
- Copyright (c) 2011-2013, ARM Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-
-#include "NorFlash.h"
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-{
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReset(MediaId=0x%x)\n", This->Media->MediaId));
-
- return NorFlashReset (Instance);
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- EFI_STATUS Status;
- EFI_BLOCK_IO_MEDIA *Media;
-
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
- Media = This->Media;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReadBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes (%d kB), BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, BufferSizeInBytes, Buffer));
-
- if (!Media) {
- Status = EFI_INVALID_PARAMETER;
- } else if (!Media->MediaPresent) {
- Status = EFI_NO_MEDIA;
- } else if (Media->MediaId != MediaId) {
- Status = EFI_MEDIA_CHANGED;
- } else if ((Media->IoAlign > 2) && (((UINTN)Buffer & (Media->IoAlign - 1)) != 0)) {
- Status = EFI_INVALID_PARAMETER;
- } else {
- Status = NorFlashReadBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
- }
-
- return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- EFI_STATUS Status;
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes, BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, Buffer));
-
- if ( !This->Media->MediaPresent ) {
- Status = EFI_NO_MEDIA;
- } else if ( This->Media->MediaId != MediaId ) {
- Status = EFI_MEDIA_CHANGED;
- } else if ( This->Media->ReadOnly ) {
- Status = EFI_WRITE_PROTECTED;
- } else {
- Status = NorFlashWriteBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
- }
-
- return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This
- )
-{
- // No Flush required for the NOR Flash driver
- // because cache operations are not permitted.
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoFlushBlocks: Function NOT IMPLEMENTED (not required).\n"));
-
- // Nothing to do so just return without error
- return EFI_SUCCESS;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
deleted file mode 100644
index f7b92de21a57..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
+++ /dev/null
@@ -1,506 +0,0 @@
-/** @file NorFlashDxe.c
-
- Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/UefiLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/PcdLib.h>
-#include <Library/HobLib.h>
-#include <Library/DxeServicesTableLib.h>
-
-#include "NorFlash.h"
-
-STATIC EFI_EVENT mNorFlashVirtualAddrChangeEvent;
-
-//
-// Global variable declarations
-//
-NOR_FLASH_INSTANCE **mNorFlashInstances;
-UINT32 mNorFlashDeviceCount;
-UINTN mFlashNvStorageVariableBase;
-EFI_EVENT mFvbVirtualAddrChangeEvent;
-
-NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
- NOR_FLASH_SIGNATURE, // Signature
- NULL, // Handle ... NEED TO BE FILLED
-
- 0, // DeviceBaseAddress ... NEED TO BE FILLED
- 0, // RegionBaseAddress ... NEED TO BE FILLED
- 0, // Size ... NEED TO BE FILLED
- 0, // StartLba
-
- {
- EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
- NULL, // Media ... NEED TO BE FILLED
- NorFlashBlockIoReset, // Reset;
- NorFlashBlockIoReadBlocks, // ReadBlocks
- NorFlashBlockIoWriteBlocks, // WriteBlocks
- NorFlashBlockIoFlushBlocks // FlushBlocks
- }, // BlockIoProtocol
-
- {
- 0, // MediaId ... NEED TO BE FILLED
- FALSE, // RemovableMedia
- TRUE, // MediaPresent
- FALSE, // LogicalPartition
- FALSE, // ReadOnly
- FALSE, // WriteCaching;
- 0, // BlockSize ... NEED TO BE FILLED
- 4, // IoAlign
- 0, // LastBlock ... NEED TO BE FILLED
- 0, // LowestAlignedLba
- 1, // LogicalBlocksPerPhysicalBlock
- }, // Media;
-
- {
- EFI_DISK_IO_PROTOCOL_REVISION, // Revision
- NorFlashDiskIoReadDisk, // ReadDisk
- NorFlashDiskIoWriteDisk // WriteDisk
- },
-
- {
- FvbGetAttributes, // GetAttributes
- FvbSetAttributes, // SetAttributes
- FvbGetPhysicalAddress, // GetPhysicalAddress
- FvbGetBlockSize, // GetBlockSize
- FvbRead, // Read
- FvbWrite, // Write
- FvbEraseBlocks, // EraseBlocks
- NULL, // ParentHandle
- }, // FvbProtoccol;
- NULL, // ShadowBuffer
- {
- {
- {
- HARDWARE_DEVICE_PATH,
- HW_VENDOR_DP,
- {
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
- }
- },
- { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
- }, // GUID ... NEED TO BE FILLED
- },
- 0, // Index
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
- }
- } // DevicePath
-};
-
-EFI_STATUS
-NorFlashCreateInstance (
- IN UINTN NorFlashDeviceBase,
- IN UINTN NorFlashRegionBase,
- IN UINTN NorFlashSize,
- IN UINT32 Index,
- IN UINT32 BlockSize,
- IN BOOLEAN SupportFvb,
- OUT NOR_FLASH_INSTANCE **NorFlashInstance
- )
-{
- EFI_STATUS Status;
- NOR_FLASH_INSTANCE *Instance;
-
- ASSERT (NorFlashInstance != NULL);
-
- Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
- if (Instance == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Instance->DeviceBaseAddress = NorFlashDeviceBase;
- Instance->RegionBaseAddress = NorFlashRegionBase;
- Instance->Size = NorFlashSize;
-
- Instance->BlockIoProtocol.Media = &Instance->Media;
- Instance->Media.MediaId = Index;
- Instance->Media.BlockSize = BlockSize;
- Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
-
- CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
- Instance->DevicePath.Index = (UINT8)Index;
-
- Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
- if (Instance->ShadowBuffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- if (SupportFvb) {
- NorFlashFvbInitialize (Instance);
-
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Instance->Handle,
- &gEfiDevicePathProtocolGuid,
- &Instance->DevicePath,
- &gEfiBlockIoProtocolGuid,
- &Instance->BlockIoProtocol,
- &gEfiFirmwareVolumeBlockProtocolGuid,
- &Instance->FvbProtocol,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool (Instance);
- return Status;
- }
- } else {
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Instance->Handle,
- &gEfiDevicePathProtocolGuid,
- &Instance->DevicePath,
- &gEfiBlockIoProtocolGuid,
- &Instance->BlockIoProtocol,
- &gEfiDiskIoProtocolGuid,
- &Instance->DiskIoProtocol,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool (Instance);
- return Status;
- }
- }
-
- *NorFlashInstance = Instance;
- return Status;
-}
-
-/**
- * This function unlock and erase an entire NOR Flash block.
- **/
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
- UINTN Index;
- EFI_TPL OriginalTPL;
-
- if (!EfiAtRuntime ()) {
- // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
- OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
- } else {
- // This initialization is only to prevent the compiler to complain about the
- // use of uninitialized variables
- OriginalTPL = TPL_HIGH_LEVEL;
- }
-
- Index = 0;
- // The block erase might fail a first time (SW bug ?). Retry it ...
- do {
- // Unlock the block if we have to
- Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- break;
- }
-
- Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
- Index++;
- } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
-
- if (Index == NOR_FLASH_ERASE_RETRY) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
- }
-
- if (!EfiAtRuntime ()) {
- // Interruptions can resume.
- gBS->RestoreTPL (OriginalTPL);
- }
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteFullBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINT32 *DataBuffer,
- IN UINT32 BlockSizeInWords
- )
-{
- EFI_STATUS Status;
- UINTN WordAddress;
- UINT32 WordIndex;
- UINTN BufferIndex;
- UINTN BlockAddress;
- UINTN BuffersInBlock;
- UINTN RemainingWords;
- EFI_TPL OriginalTPL;
- UINTN Cnt;
-
- Status = EFI_SUCCESS;
-
- // Get the physical address of the block
- BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
-
- // Start writing from the first address at the start of the block
- WordAddress = BlockAddress;
-
- if (!EfiAtRuntime ()) {
- // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
- OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
- } else {
- // This initialization is only to prevent the compiler to complain about the
- // use of uninitialized variables
- OriginalTPL = TPL_HIGH_LEVEL;
- }
-
- Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
- goto EXIT;
- }
-
- // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
-
- // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
- if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
- // First, break the entire block into buffer-sized chunks.
- BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
-
- // Then feed each buffer chunk to the NOR Flash
- // If a buffer does not contain any data, don't write it.
- for (BufferIndex = 0;
- BufferIndex < BuffersInBlock;
- BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
- )
- {
- // Check the buffer to see if it contains any data (not set all 1s).
- for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
- if (~DataBuffer[Cnt] != 0 ) {
- // Some data found, write the buffer.
- Status = NorFlashWriteBuffer (
- Instance,
- WordAddress,
- P30_MAX_BUFFER_SIZE_IN_BYTES,
- DataBuffer
- );
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
-
- break;
- }
- }
- }
-
- // Finally, finish off any remaining words that are less than the maximum size of the buffer
- RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
-
- if (RemainingWords != 0) {
- Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- } else {
- // For now, use the single word programming algorithm
- // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
- // i.e. which ends in the range 0x......01 - 0x......7F.
- for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
- Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- }
-
-EXIT:
- if (!EfiAtRuntime ()) {
- // Interruptions can resume.
- gBS->RestoreTPL (OriginalTPL);
- }
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashInitialise (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
- UINT32 Index;
- NOR_FLASH_DESCRIPTION *NorFlashDevices;
- BOOLEAN ContainVariableStorage;
-
- Status = NorFlashPlatformInitialization ();
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
- return Status;
- }
-
- Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
- return Status;
- }
-
- mNorFlashInstances = AllocateRuntimePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
-
- for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
- // Check if this NOR Flash device contain the variable storage region
-
- if (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= PcdGet64 (PcdFlashNvStorageVariableBase64)) &&
- (PcdGet64 (PcdFlashNvStorageVariableBase64) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- } else {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= PcdGet32 (PcdFlashNvStorageVariableBase)) &&
- (PcdGet32 (PcdFlashNvStorageVariableBase) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- }
-
- Status = NorFlashCreateInstance (
- NorFlashDevices[Index].DeviceBaseAddress,
- NorFlashDevices[Index].RegionBaseAddress,
- NorFlashDevices[Index].Size,
- Index,
- NorFlashDevices[Index].BlockSize,
- ContainVariableStorage,
- &mNorFlashInstances[Index]
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
- }
- }
-
- //
- // Register for the virtual address change event
- //
- Status = gBS->CreateEventEx (
- EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- NorFlashVirtualNotifyEvent,
- NULL,
- &gEfiEventVirtualAddressChangeGuid,
- &mNorFlashVirtualAddrChangeEvent
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- UINT32 FvbNumLba;
- EFI_BOOT_MODE BootMode;
- UINTN RuntimeMmioRegionSize;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashFvbInitialize\n"));
- ASSERT ((Instance != NULL));
-
- //
- // Declare the Non-Volatile storage as EFI_MEMORY_RUNTIME
- //
-
- // Note: all the NOR Flash region needs to be reserved into the UEFI Runtime memory;
- // even if we only use the small block region at the top of the NOR Flash.
- // The reason is when the NOR Flash memory is set into program mode, the command
- // is written as the base of the flash region (ie: Instance->DeviceBaseAddress)
- RuntimeMmioRegionSize = (Instance->RegionBaseAddress - Instance->DeviceBaseAddress) + Instance->Size;
-
- Status = gDS->AddMemorySpace (
- EfiGcdMemoryTypeMemoryMappedIo,
- Instance->DeviceBaseAddress,
- RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
- );
- ASSERT_EFI_ERROR (Status);
-
- Status = gDS->SetMemorySpaceAttributes (
- Instance->DeviceBaseAddress,
- RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
- );
- ASSERT_EFI_ERROR (Status);
-
- mFlashNvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
-
- // Set the index of the first LBA for the FVB
- Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
-
- BootMode = GetBootModeHob ();
- if (BootMode == BOOT_WITH_DEFAULT_SETTINGS) {
- Status = EFI_INVALID_PARAMETER;
- } else {
- // Determine if there is a valid header at the beginning of the NorFlash
- Status = ValidateFvHeader (Instance);
- }
-
- // Install the Default FVB header if required
- if (EFI_ERROR (Status)) {
- // There is no valid header, so time to install one.
- DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
- DEBUG ((
- DEBUG_INFO,
- "%a: Installing a correct one for this volume.\n",
- __FUNCTION__
- ));
-
- // Erase all the NorFlash that is reserved for variable storage
- FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
-
- Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Install all appropriate headers
- Status = InitializeFvAndVariableStoreHeaders (Instance);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- //
- // The driver implementing the variable read service can now be dispatched;
- // the varstore headers are in place.
- //
- Status = gBS->InstallProtocolInterface (
- &gImageHandle,
- &gEdkiiNvVarStoreFormattedGuid,
- EFI_NATIVE_INTERFACE,
- NULL
- );
- ASSERT_EFI_ERROR (Status);
-
- //
- // Register for the virtual address change event
- //
- Status = gBS->CreateEventEx (
- EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- FvbVirtualNotifyEvent,
- NULL,
- &gEfiEventVirtualAddressChangeGuid,
- &mFvbVirtualAddrChangeEvent
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
deleted file mode 100644
index f8d4c2703143..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+++ /dev/null
@@ -1,71 +0,0 @@
-#/** @file
-#
-# Component description file for NorFlashDxe module
-#
-# Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = ArmVeNorFlashDxe
- FILE_GUID = 93E34C7E-B50E-11DF-9223-2443DFD72085
- MODULE_TYPE = DXE_RUNTIME_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = NorFlashInitialise
-
-[Sources.common]
- NorFlash.c
- NorFlash.h
- NorFlashDxe.c
- NorFlashFvb.c
- NorFlashBlockIoDxe.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
-
-[LibraryClasses]
- IoLib
- BaseLib
- DebugLib
- HobLib
- NorFlashPlatformLib
- UefiLib
- UefiDriverEntryPoint
- UefiBootServicesTableLib
- UefiRuntimeLib
- DxeServicesTableLib
-
-[Guids]
- gEfiSystemNvDataFvGuid
- gEfiVariableGuid
- gEfiAuthenticatedVariableGuid
- gEfiEventVirtualAddressChangeGuid
- gEdkiiNvVarStoreFormattedGuid ## PRODUCES ## PROTOCOL
-
-[Protocols]
- gEfiBlockIoProtocolGuid
- gEfiDevicePathProtocolGuid
- gEfiFirmwareVolumeBlockProtocolGuid
- gEfiDiskIoProtocolGuid
-
-[Pcd.common]
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
-
- gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
-
-[Depex]
- gEfiCpuArchProtocolGuid
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c
deleted file mode 100644
index 0767581308d2..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c
+++ /dev/null
@@ -1,777 +0,0 @@
-/*++ @file NorFlashFvbDxe.c
-
- Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- --*/
-
-#include <PiDxe.h>
-
-#include <Library/PcdLib.h>
-#include <Library/BaseLib.h>
-#include <Library/UefiLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-
-#include <Guid/VariableFormat.h>
-#include <Guid/SystemNvDataGuid.h>
-#include <Guid/NvVarStoreFormatted.h>
-
-#include "NorFlash.h"
-
-extern UINTN mFlashNvStorageVariableBase;
-///
-/// The Firmware Volume Block Protocol is the low-level interface
-/// to a firmware volume. File-level access to a firmware volume
-/// should not be done using the Firmware Volume Block Protocol.
-/// Normal access to a firmware volume must use the Firmware
-/// Volume Protocol. Typically, only the file system driver that
-/// produces the Firmware Volume Protocol will bind to the
-/// Firmware Volume Block Protocol.
-///
-
-/**
- Initialises the FV Header and Variable Store Header
- to support variable operations.
-
- @param[in] Ptr - Location to initialise the headers
-
-**/
-EFI_STATUS
-InitializeFvAndVariableStoreHeaders (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- VOID *Headers;
- UINTN HeadersLength;
- EFI_FIRMWARE_VOLUME_HEADER *FirmwareVolumeHeader;
- VARIABLE_STORE_HEADER *VariableStoreHeader;
- UINT32 NvStorageFtwSpareSize;
- UINT32 NvStorageFtwWorkingSize;
- UINT32 NvStorageVariableSize;
- UINT64 NvStorageFtwSpareBase;
- UINT64 NvStorageFtwWorkingBase;
- UINT64 NvStorageVariableBase;
-
- HeadersLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY) + sizeof (VARIABLE_STORE_HEADER);
- Headers = AllocateZeroPool (HeadersLength);
-
- NvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
- NvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
- NvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
-
- NvStorageFtwSpareBase = (PcdGet64 (PcdFlashNvStorageFtwSpareBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageFtwSpareBase64) : PcdGet32 (PcdFlashNvStorageFtwSpareBase);
- NvStorageFtwWorkingBase = (PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) : PcdGet32 (PcdFlashNvStorageFtwWorkingBase);
- NvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
-
- // FirmwareVolumeHeader->FvLength is declared to have the Variable area AND the FTW working area AND the FTW Spare contiguous.
- if ((NvStorageVariableBase + NvStorageVariableSize) != NvStorageFtwWorkingBase) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwWorkingBase is not contiguous with NvStorageVariableBase region\n",
- __FUNCTION__
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((NvStorageFtwWorkingBase + NvStorageFtwWorkingSize) != NvStorageFtwSpareBase) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwSpareBase is not contiguous with NvStorageFtwWorkingBase region\n",
- __FUNCTION__
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- // Check if the size of the area is at least one block size
- if ((NvStorageVariableSize <= 0) || (NvStorageVariableSize / Instance->Media.BlockSize <= 0)) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageVariableSize is 0x%x, should be atleast one block size\n",
- __FUNCTION__,
- NvStorageVariableSize
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((NvStorageFtwWorkingSize <= 0) || (NvStorageFtwWorkingSize / Instance->Media.BlockSize <= 0)) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwWorkingSize is 0x%x, should be atleast one block size\n",
- __FUNCTION__,
- NvStorageFtwWorkingSize
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((NvStorageFtwSpareSize <= 0) || (NvStorageFtwSpareSize / Instance->Media.BlockSize <= 0)) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwSpareSize is 0x%x, should be atleast one block size\n",
- __FUNCTION__,
- NvStorageFtwSpareSize
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- // Ensure the Variable area Base Addresses are aligned on a block size boundaries
- if ((NvStorageVariableBase % Instance->Media.BlockSize != 0) ||
- (NvStorageFtwWorkingBase % Instance->Media.BlockSize != 0) ||
- (NvStorageFtwSpareBase % Instance->Media.BlockSize != 0))
- {
- DEBUG ((DEBUG_ERROR, "%a: NvStorage Base addresses must be aligned to block size boundaries", __FUNCTION__));
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // EFI_FIRMWARE_VOLUME_HEADER
- //
- FirmwareVolumeHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Headers;
- CopyGuid (&FirmwareVolumeHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid);
- FirmwareVolumeHeader->FvLength =
- PcdGet32 (PcdFlashNvStorageVariableSize) +
- PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
- PcdGet32 (PcdFlashNvStorageFtwSpareSize);
- FirmwareVolumeHeader->Signature = EFI_FVH_SIGNATURE;
- FirmwareVolumeHeader->Attributes = (EFI_FVB_ATTRIBUTES_2)(
- EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
- EFI_FVB2_READ_STATUS | // Reads are currently enabled
- EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
- EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
- EFI_FVB2_ERASE_POLARITY | // After erasure all bits take this value (i.e. '1')
- EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
- EFI_FVB2_WRITE_ENABLED_CAP // Writes may be enabled
- );
- FirmwareVolumeHeader->HeaderLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY);
- FirmwareVolumeHeader->Revision = EFI_FVH_REVISION;
- FirmwareVolumeHeader->BlockMap[0].NumBlocks = Instance->Media.LastBlock + 1;
- FirmwareVolumeHeader->BlockMap[0].Length = Instance->Media.BlockSize;
- FirmwareVolumeHeader->BlockMap[1].NumBlocks = 0;
- FirmwareVolumeHeader->BlockMap[1].Length = 0;
- FirmwareVolumeHeader->Checksum = CalculateCheckSum16 ((UINT16 *)FirmwareVolumeHeader, FirmwareVolumeHeader->HeaderLength);
-
- //
- // VARIABLE_STORE_HEADER
- //
- VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)Headers + FirmwareVolumeHeader->HeaderLength);
- CopyGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid);
- VariableStoreHeader->Size = PcdGet32 (PcdFlashNvStorageVariableSize) - FirmwareVolumeHeader->HeaderLength;
- VariableStoreHeader->Format = VARIABLE_STORE_FORMATTED;
- VariableStoreHeader->State = VARIABLE_STORE_HEALTHY;
-
- // Install the combined super-header in the NorFlash
- Status = FvbWrite (&Instance->FvbProtocol, 0, 0, &HeadersLength, Headers);
-
- FreePool (Headers);
- return Status;
-}
-
-/**
- Check the integrity of firmware volume header.
-
- @param[in] FwVolHeader - A pointer to a firmware volume header
-
- @retval EFI_SUCCESS - The firmware volume is consistent
- @retval EFI_NOT_FOUND - The firmware volume has been corrupted.
-
-**/
-EFI_STATUS
-ValidateFvHeader (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- UINT16 Checksum;
- EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;
- VARIABLE_STORE_HEADER *VariableStoreHeader;
- UINTN VariableStoreLength;
- UINTN FvLength;
-
- FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Instance->RegionBaseAddress;
-
- FvLength = PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
- PcdGet32 (PcdFlashNvStorageFtwSpareSize);
-
- //
- // Verify the header revision, header signature, length
- // Length of FvBlock cannot be 2**64-1
- // HeaderLength cannot be an odd number
- //
- if ( (FwVolHeader->Revision != EFI_FVH_REVISION)
- || (FwVolHeader->Signature != EFI_FVH_SIGNATURE)
- || (FwVolHeader->FvLength != FvLength)
- )
- {
- DEBUG ((
- DEBUG_INFO,
- "%a: No Firmware Volume header present\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- // Check the Firmware Volume Guid
- if ( CompareGuid (&FwVolHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid) == FALSE ) {
- DEBUG ((
- DEBUG_INFO,
- "%a: Firmware Volume Guid non-compatible\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- // Verify the header checksum
- Checksum = CalculateSum16 ((UINT16 *)FwVolHeader, FwVolHeader->HeaderLength);
- if (Checksum != 0) {
- DEBUG ((
- DEBUG_INFO,
- "%a: FV checksum is invalid (Checksum:0x%X)\n",
- __FUNCTION__,
- Checksum
- ));
- return EFI_NOT_FOUND;
- }
-
- VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)FwVolHeader + FwVolHeader->HeaderLength);
-
- // Check the Variable Store Guid
- if (!CompareGuid (&VariableStoreHeader->Signature, &gEfiVariableGuid) &&
- !CompareGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid))
- {
- DEBUG ((
- DEBUG_INFO,
- "%a: Variable Store Guid non-compatible\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- VariableStoreLength = PcdGet32 (PcdFlashNvStorageVariableSize) - FwVolHeader->HeaderLength;
- if (VariableStoreHeader->Size != VariableStoreLength) {
- DEBUG ((
- DEBUG_INFO,
- "%a: Variable Store Length does not match\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- The GetAttributes() function retrieves the attributes and
- current settings of the block.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Attributes Pointer to EFI_FVB_ATTRIBUTES_2 in which the attributes and
- current settings are returned.
- Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
-
- @retval EFI_SUCCESS The firmware volume attributes were returned.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- )
-{
- EFI_FVB_ATTRIBUTES_2 FlashFvbAttributes;
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- FlashFvbAttributes = (EFI_FVB_ATTRIBUTES_2)(
-
- EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
- EFI_FVB2_READ_STATUS | // Reads are currently enabled
- EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
- EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
- EFI_FVB2_ERASE_POLARITY // After erasure all bits take this value (i.e. '1')
-
- );
-
- // Check if it is write protected
- if (Instance->Media.ReadOnly != TRUE) {
- FlashFvbAttributes = FlashFvbAttributes |
- EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
- EFI_FVB2_WRITE_ENABLED_CAP; // Writes may be enabled
- }
-
- *Attributes = FlashFvbAttributes;
-
- DEBUG ((DEBUG_BLKIO, "FvbGetAttributes(0x%X)\n", *Attributes));
-
- return EFI_SUCCESS;
-}
-
-/**
- The SetAttributes() function sets configurable firmware volume attributes
- and returns the new settings of the firmware volume.
-
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Attributes On input, Attributes is a pointer to EFI_FVB_ATTRIBUTES_2
- that contains the desired firmware volume settings.
- On successful return, it contains the new settings of
- the firmware volume.
- Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
-
- @retval EFI_SUCCESS The firmware volume attributes were returned.
-
- @retval EFI_INVALID_PARAMETER The attributes requested are in conflict with the capabilities
- as declared in the firmware volume header.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbSetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- )
-{
- DEBUG ((DEBUG_BLKIO, "FvbSetAttributes(0x%X) is not supported\n", *Attributes));
- return EFI_UNSUPPORTED;
-}
-
-/**
- The GetPhysicalAddress() function retrieves the base address of
- a memory-mapped firmware volume. This function should be called
- only for memory-mapped firmware volumes.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Address Pointer to a caller-allocated
- EFI_PHYSICAL_ADDRESS that, on successful
- return from GetPhysicalAddress(), contains the
- base address of the firmware volume.
-
- @retval EFI_SUCCESS The firmware volume base address was returned.
-
- @retval EFI_NOT_SUPPORTED The firmware volume is not memory mapped.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetPhysicalAddress (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_PHYSICAL_ADDRESS *Address
- )
-{
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbGetPhysicalAddress(BaseAddress=0x%08x)\n", Instance->RegionBaseAddress));
-
- ASSERT (Address != NULL);
-
- *Address = mFlashNvStorageVariableBase;
- return EFI_SUCCESS;
-}
-
-/**
- The GetBlockSize() function retrieves the size of the requested
- block. It also returns the number of additional blocks with
- the identical size. The GetBlockSize() function is used to
- retrieve the block map (see EFI_FIRMWARE_VOLUME_HEADER).
-
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba Indicates the block for which to return the size.
-
- @param BlockSize Pointer to a caller-allocated UINTN in which
- the size of the block is returned.
-
- @param NumberOfBlocks Pointer to a caller-allocated UINTN in
- which the number of consecutive blocks,
- starting with Lba, is returned. All
- blocks in this range have a size of
- BlockSize.
-
-
- @retval EFI_SUCCESS The firmware volume base address was returned.
-
- @retval EFI_INVALID_PARAMETER The requested LBA is out of range.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetBlockSize (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- OUT UINTN *BlockSize,
- OUT UINTN *NumberOfBlocks
- )
-{
- EFI_STATUS Status;
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize(Lba=%ld, BlockSize=0x%x, LastBlock=%ld)\n", Lba, Instance->Media.BlockSize, Instance->Media.LastBlock));
-
- if (Lba > Instance->Media.LastBlock) {
- DEBUG ((DEBUG_ERROR, "FvbGetBlockSize: ERROR - Parameter LBA %ld is beyond the last Lba (%ld).\n", Lba, Instance->Media.LastBlock));
- Status = EFI_INVALID_PARAMETER;
- } else {
- // This is easy because in this platform each NorFlash device has equal sized blocks.
- *BlockSize = (UINTN)Instance->Media.BlockSize;
- *NumberOfBlocks = (UINTN)(Instance->Media.LastBlock - Lba + 1);
-
- DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize: *BlockSize=0x%x, *NumberOfBlocks=0x%x.\n", *BlockSize, *NumberOfBlocks));
-
- Status = EFI_SUCCESS;
- }
-
- return Status;
-}
-
-/**
- Reads the specified number of bytes into a buffer from the specified block.
-
- The Read() function reads the requested number of bytes from the
- requested block and stores them in the provided buffer.
- Implementations should be mindful that the firmware volume
- might be in the ReadDisabled state. If it is in this state,
- the Read() function must return the status code
- EFI_ACCESS_DENIED without modifying the contents of the
- buffer. The Read() function must also prevent spanning block
- boundaries. If a read is requested that would span a block
- boundary, the read must read up to the boundary but not
- beyond. The output parameter NumBytes must be set to correctly
- indicate the number of bytes actually read. The caller must be
- aware that a read may be partially completed.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba The starting logical block index from which to read.
-
- @param Offset Offset into the block at which to begin reading.
-
- @param NumBytes Pointer to a UINTN.
- At entry, *NumBytes contains the total size of the buffer.
- At exit, *NumBytes contains the total number of bytes read.
-
- @param Buffer Pointer to a caller-allocated buffer that will be used
- to hold the data that is read.
-
- @retval EFI_SUCCESS The firmware volume was read successfully, and contents are
- in Buffer.
-
- @retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary.
- On output, NumBytes contains the total number of bytes
- returned in Buffer.
-
- @retval EFI_ACCESS_DENIED The firmware volume is in the ReadDisabled state.
-
- @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be read.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbRead (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN OUT UINT8 *Buffer
- )
-{
- EFI_STATUS TempStatus;
- UINTN BlockSize;
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbRead(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Instance->StartLba + Lba, Offset, *NumBytes, Buffer));
-
- TempStatus = EFI_SUCCESS;
-
- // Cache the block size to avoid de-referencing pointers all the time
- BlockSize = Instance->Media.BlockSize;
-
- DEBUG ((DEBUG_BLKIO, "FvbRead: Check if (Offset=0x%x + NumBytes=0x%x) <= BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
-
- // The read must not span block boundaries.
- // We need to check each variable individually because adding two large values together overflows.
- if ((Offset >= BlockSize) ||
- (*NumBytes > BlockSize) ||
- ((Offset + *NumBytes) > BlockSize))
- {
- DEBUG ((DEBUG_ERROR, "FvbRead: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // We must have some bytes to read
- if (*NumBytes == 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Decide if we are doing full block reads or not.
- if (*NumBytes % BlockSize != 0) {
- TempStatus = NorFlashRead (Instance, Instance->StartLba + Lba, Offset, *NumBytes, Buffer);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
- } else {
- // Read NOR Flash data into shadow buffer
- TempStatus = NorFlashReadBlocks (Instance, Instance->StartLba + Lba, BlockSize, Buffer);
- if (EFI_ERROR (TempStatus)) {
- // Return one of the pre-approved error statuses
- return EFI_DEVICE_ERROR;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Writes the specified number of bytes from the input buffer to the block.
-
- The Write() function writes the specified number of bytes from
- the provided buffer to the specified block and offset. If the
- firmware volume is sticky write, the caller must ensure that
- all the bits of the specified range to write are in the
- EFI_FVB_ERASE_POLARITY state before calling the Write()
- function, or else the result will be unpredictable. This
- unpredictability arises because, for a sticky-write firmware
- volume, a write may negate a bit in the EFI_FVB_ERASE_POLARITY
- state but cannot flip it back again. Before calling the
- Write() function, it is recommended for the caller to first call
- the EraseBlocks() function to erase the specified block to
- write. A block erase cycle will transition bits from the
- (NOT)EFI_FVB_ERASE_POLARITY state back to the
- EFI_FVB_ERASE_POLARITY state. Implementations should be
- mindful that the firmware volume might be in the WriteDisabled
- state. If it is in this state, the Write() function must
- return the status code EFI_ACCESS_DENIED without modifying the
- contents of the firmware volume. The Write() function must
- also prevent spanning block boundaries. If a write is
- requested that spans a block boundary, the write must store up
- to the boundary but not beyond. The output parameter NumBytes
- must be set to correctly indicate the number of bytes actually
- written. The caller must be aware that a write may be
- partially completed. All writes, partial or otherwise, must be
- fully flushed to the hardware before the Write() service
- returns.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba The starting logical block index to write to.
-
- @param Offset Offset into the block at which to begin writing.
-
- @param NumBytes The pointer to a UINTN.
- At entry, *NumBytes contains the total size of the buffer.
- At exit, *NumBytes contains the total number of bytes actually written.
-
- @param Buffer The pointer to a caller-allocated buffer that contains the source for the write.
-
- @retval EFI_SUCCESS The firmware volume was written successfully.
-
- @retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
- On output, NumBytes contains the total number of bytes
- actually written.
-
- @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
-
- @retval EFI_DEVICE_ERROR The block device is malfunctioning and could not be written.
-
-
- **/
-EFI_STATUS
-EFIAPI
-FvbWrite (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- return NorFlashWriteSingleBlock (Instance, Instance->StartLba + Lba, Offset, NumBytes, Buffer);
-}
-
-/**
- Erases and initialises a firmware volume block.
-
- The EraseBlocks() function erases one or more blocks as denoted
- by the variable argument list. The entire parameter list of
- blocks must be verified before erasing any blocks. If a block is
- requested that does not exist within the associated firmware
- volume (it has a larger index than the last block of the
- firmware volume), the EraseBlocks() function must return the
- status code EFI_INVALID_PARAMETER without modifying the contents
- of the firmware volume. Implementations should be mindful that
- the firmware volume might be in the WriteDisabled state. If it
- is in this state, the EraseBlocks() function must return the
- status code EFI_ACCESS_DENIED without modifying the contents of
- the firmware volume. All calls to EraseBlocks() must be fully
- flushed to the hardware before the EraseBlocks() service
- returns.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL
- instance.
-
- @param ... The variable argument list is a list of tuples.
- Each tuple describes a range of LBAs to erase
- and consists of the following:
- - An EFI_LBA that indicates the starting LBA
- - A UINTN that indicates the number of blocks to erase.
-
- The list is terminated with an EFI_LBA_LIST_TERMINATOR.
- For example, the following indicates that two ranges of blocks
- (5-7 and 10-11) are to be erased:
- EraseBlocks (This, 5, 3, 10, 2, EFI_LBA_LIST_TERMINATOR);
-
- @retval EFI_SUCCESS The erase request successfully completed.
-
- @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
-
- @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be written.
- The firmware device may have been partially erased.
-
- @retval EFI_INVALID_PARAMETER One or more of the LBAs listed in the variable argument list do
- not exist in the firmware volume.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbEraseBlocks (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- ...
- )
-{
- EFI_STATUS Status;
- VA_LIST Args;
- UINTN BlockAddress; // Physical address of Lba to erase
- EFI_LBA StartingLba; // Lba from which we start erasing
- UINTN NumOfLba; // Number of Lba blocks to erase
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks()\n"));
-
- Status = EFI_SUCCESS;
-
- // Detect WriteDisabled state
- if (Instance->Media.ReadOnly == TRUE) {
- // Firmware volume is in WriteDisabled state
- DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Device is in WriteDisabled state.\n"));
- return EFI_ACCESS_DENIED;
- }
-
- // Before erasing, check the entire list of parameters to ensure all specified blocks are valid
-
- VA_START (Args, This);
- do {
- // Get the Lba from which we start erasing
- StartingLba = VA_ARG (Args, EFI_LBA);
-
- // Have we reached the end of the list?
- if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
- // Exit the while loop
- break;
- }
-
- // How many Lba blocks are we requested to erase?
- NumOfLba = VA_ARG (Args, UINTN);
-
- // All blocks must be within range
- DEBUG ((
- DEBUG_BLKIO,
- "FvbEraseBlocks: Check if: ( StartingLba=%ld + NumOfLba=%Lu - 1 ) > LastBlock=%ld.\n",
- Instance->StartLba + StartingLba,
- (UINT64)NumOfLba,
- Instance->Media.LastBlock
- ));
- if ((NumOfLba == 0) || ((Instance->StartLba + StartingLba + NumOfLba - 1) > Instance->Media.LastBlock)) {
- VA_END (Args);
- DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Lba range goes past the last Lba.\n"));
- Status = EFI_INVALID_PARAMETER;
- goto EXIT;
- }
- } while (TRUE);
-
- VA_END (Args);
-
- //
- // To get here, all must be ok, so start erasing
- //
- VA_START (Args, This);
- do {
- // Get the Lba from which we start erasing
- StartingLba = VA_ARG (Args, EFI_LBA);
-
- // Have we reached the end of the list?
- if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
- // Exit the while loop
- break;
- }
-
- // How many Lba blocks are we requested to erase?
- NumOfLba = VA_ARG (Args, UINTN);
-
- // Go through each one and erase it
- while (NumOfLba > 0) {
- // Get the physical address of Lba to erase
- BlockAddress = GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Instance->StartLba + StartingLba,
- Instance->Media.BlockSize
- );
-
- // Erase it
- DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks: Erasing Lba=%ld @ 0x%08x.\n", Instance->StartLba + StartingLba, BlockAddress));
- Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- VA_END (Args);
- Status = EFI_DEVICE_ERROR;
- goto EXIT;
- }
-
- // Move to the next Lba
- StartingLba++;
- NumOfLba--;
- }
- } while (TRUE);
-
- VA_END (Args);
-
-EXIT:
- return Status;
-}
-
-/**
- Fixup internal data so that EFI can be call in virtual mode.
- Call the passed in Child Notify event and convert any pointers in
- lib to virtual mode.
-
- @param[in] Event The Event that is being processed
- @param[in] Context Event Context
-**/
-VOID
-EFIAPI
-FvbVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- EfiConvertPointer (0x0, (VOID **)&mFlashNvStorageVariableBase);
- return;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c
deleted file mode 100644
index b72ad97b0b55..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/** @file NorFlashStandaloneMm.c
-
- Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
- Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/MmServicesTableLib.h>
-
-#include "NorFlash.h"
-
-//
-// Global variable declarations
-//
-NOR_FLASH_INSTANCE **mNorFlashInstances;
-UINT32 mNorFlashDeviceCount;
-UINTN mFlashNvStorageVariableBase;
-
-NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
- NOR_FLASH_SIGNATURE, // Signature
- NULL, // Handle ... NEED TO BE FILLED
-
- 0, // DeviceBaseAddress ... NEED TO BE FILLED
- 0, // RegionBaseAddress ... NEED TO BE FILLED
- 0, // Size ... NEED TO BE FILLED
- 0, // StartLba
-
- {
- EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
- NULL, // Media ... NEED TO BE FILLED
- NULL, // Reset;
- NULL, // ReadBlocks
- NULL, // WriteBlocks
- NULL // FlushBlocks
- }, // BlockIoProtocol
-
- {
- 0, // MediaId ... NEED TO BE FILLED
- FALSE, // RemovableMedia
- TRUE, // MediaPresent
- FALSE, // LogicalPartition
- FALSE, // ReadOnly
- FALSE, // WriteCaching;
- 0, // BlockSize ... NEED TO BE FILLED
- 4, // IoAlign
- 0, // LastBlock ... NEED TO BE FILLED
- 0, // LowestAlignedLba
- 1, // LogicalBlocksPerPhysicalBlock
- }, // Media;
-
- {
- EFI_DISK_IO_PROTOCOL_REVISION, // Revision
- NULL, // ReadDisk
- NULL // WriteDisk
- },
-
- {
- FvbGetAttributes, // GetAttributes
- FvbSetAttributes, // SetAttributes
- FvbGetPhysicalAddress, // GetPhysicalAddress
- FvbGetBlockSize, // GetBlockSize
- FvbRead, // Read
- FvbWrite, // Write
- FvbEraseBlocks, // EraseBlocks
- NULL, // ParentHandle
- }, // FvbProtoccol;
- NULL, // ShadowBuffer
- {
- {
- {
- HARDWARE_DEVICE_PATH,
- HW_VENDOR_DP,
- {
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
- }
- },
- { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
- }, // GUID ... NEED TO BE FILLED
- },
- 0, // Index
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
- }
- } // DevicePath
-};
-
-EFI_STATUS
-NorFlashCreateInstance (
- IN UINTN NorFlashDeviceBase,
- IN UINTN NorFlashRegionBase,
- IN UINTN NorFlashSize,
- IN UINT32 Index,
- IN UINT32 BlockSize,
- IN BOOLEAN SupportFvb,
- OUT NOR_FLASH_INSTANCE **NorFlashInstance
- )
-{
- EFI_STATUS Status;
- NOR_FLASH_INSTANCE *Instance;
-
- ASSERT (NorFlashInstance != NULL);
-
- Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
- if (Instance == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Instance->DeviceBaseAddress = NorFlashDeviceBase;
- Instance->RegionBaseAddress = NorFlashRegionBase;
- Instance->Size = NorFlashSize;
-
- Instance->BlockIoProtocol.Media = &Instance->Media;
- Instance->Media.MediaId = Index;
- Instance->Media.BlockSize = BlockSize;
- Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
-
- CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
- Instance->DevicePath.Index = (UINT8)Index;
-
- Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
- if (Instance->ShadowBuffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- if (SupportFvb) {
- NorFlashFvbInitialize (Instance);
-
- Status = gMmst->MmInstallProtocolInterface (
- &Instance->Handle,
- &gEfiSmmFirmwareVolumeBlockProtocolGuid,
- EFI_NATIVE_INTERFACE,
- &Instance->FvbProtocol
- );
- if (EFI_ERROR (Status)) {
- FreePool (Instance);
- return Status;
- }
- } else {
- DEBUG ((DEBUG_ERROR, "standalone MM NOR Flash driver only support FVB.\n"));
- FreePool (Instance);
- return EFI_UNSUPPORTED;
- }
-
- *NorFlashInstance = Instance;
- return Status;
-}
-
-/**
- * This function unlock and erase an entire NOR Flash block.
- **/
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
- UINTN Index;
-
- Index = 0;
- // The block erase might fail a first time (SW bug ?). Retry it ...
- do {
- // Unlock the block if we have to
- Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- break;
- }
-
- Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
- Index++;
- } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
-
- if (Index == NOR_FLASH_ERASE_RETRY) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
- }
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteFullBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINT32 *DataBuffer,
- IN UINT32 BlockSizeInWords
- )
-{
- EFI_STATUS Status;
- UINTN WordAddress;
- UINT32 WordIndex;
- UINTN BufferIndex;
- UINTN BlockAddress;
- UINTN BuffersInBlock;
- UINTN RemainingWords;
- UINTN Cnt;
-
- Status = EFI_SUCCESS;
-
- // Get the physical address of the block
- BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
-
- // Start writing from the first address at the start of the block
- WordAddress = BlockAddress;
-
- Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
- goto EXIT;
- }
-
- // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
-
- // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
- if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
- // First, break the entire block into buffer-sized chunks.
- BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
-
- // Then feed each buffer chunk to the NOR Flash
- // If a buffer does not contain any data, don't write it.
- for (BufferIndex = 0;
- BufferIndex < BuffersInBlock;
- BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
- )
- {
- // Check the buffer to see if it contains any data (not set all 1s).
- for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
- if (~DataBuffer[Cnt] != 0 ) {
- // Some data found, write the buffer.
- Status = NorFlashWriteBuffer (
- Instance,
- WordAddress,
- P30_MAX_BUFFER_SIZE_IN_BYTES,
- DataBuffer
- );
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
-
- break;
- }
- }
- }
-
- // Finally, finish off any remaining words that are less than the maximum size of the buffer
- RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
-
- if (RemainingWords != 0) {
- Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- } else {
- // For now, use the single word programming algorithm
- // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
- // i.e. which ends in the range 0x......01 - 0x......7F.
- for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
- Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- }
-
-EXIT:
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashInitialise (
- IN EFI_HANDLE ImageHandle,
- IN EFI_MM_SYSTEM_TABLE *MmSystemTable
- )
-{
- EFI_STATUS Status;
- UINT32 Index;
- NOR_FLASH_DESCRIPTION *NorFlashDevices;
- BOOLEAN ContainVariableStorage;
-
- Status = NorFlashPlatformInitialization ();
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
- return Status;
- }
-
- Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
- return Status;
- }
-
- mNorFlashInstances = AllocatePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
-
- for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
- // Check if this NOR Flash device contain the variable storage region
-
- if (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet64 (PcdFlashNvStorageVariableBase64)) &&
- (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- } else {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet32 (PcdFlashNvStorageVariableBase)) &&
- (FixedPcdGet32 (PcdFlashNvStorageVariableBase) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- }
-
- Status = NorFlashCreateInstance (
- NorFlashDevices[Index].DeviceBaseAddress,
- NorFlashDevices[Index].RegionBaseAddress,
- NorFlashDevices[Index].Size,
- Index,
- NorFlashDevices[Index].BlockSize,
- ContainVariableStorage,
- &mNorFlashInstances[Index]
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
- }
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- UINT32 FvbNumLba;
-
- ASSERT ((Instance != NULL));
-
- mFlashNvStorageVariableBase = (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
- FixedPcdGet64 (PcdFlashNvStorageVariableBase64) : FixedPcdGet32 (PcdFlashNvStorageVariableBase);
- // Set the index of the first LBA for the FVB
- Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
-
- // Determine if there is a valid header at the beginning of the NorFlash
- Status = ValidateFvHeader (Instance);
-
- // Install the Default FVB header if required
- if (EFI_ERROR (Status)) {
- // There is no valid header, so time to install one.
- DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
- DEBUG ((
- DEBUG_INFO,
- "%a: Installing a correct one for this volume.\n",
- __FUNCTION__
- ));
-
- // Erase all the NorFlash that is reserved for variable storage
- FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
-
- Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Install all appropriate headers
- Status = InitializeFvAndVariableStoreHeaders (Instance);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- return Status;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
deleted file mode 100644
index b8dddd5cbec3..000000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-#/** @file
-#
-# Component description file for NorFlashStandaloneMm module
-#
-# Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-# Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = ArmVeNorFlashStandaloneMm
- FILE_GUID = e67d82ad-cd56-4071-9151-95ee44990bb0
- MODULE_TYPE = MM_STANDALONE
- VERSION_STRING = 1.0
- PI_SPECIFICATION_VERSION = 0x00010032
- ENTRY_POINT = NorFlashInitialise
-
-[Sources.common]
- NorFlash.h
- NorFlash.c
- NorFlashStandaloneMm.c
- NorFlashFvb.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
-
-[LibraryClasses]
- BaseLib
- BaseMemoryLib
- DebugLib
- IoLib
- MemoryAllocationLib
- MmServicesTableLib
- NorFlashPlatformLib
- StandaloneMmDriverEntryPoint
-
-[Guids]
- gEfiSystemNvDataFvGuid
- gEfiVariableGuid
- gEfiAuthenticatedVariableGuid
-
-[Protocols]
- gEfiSmmFirmwareVolumeBlockProtocolGuid
-
-[FixedPcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
-
-[FeaturePcd]
- gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
-
-[Depex]
- TRUE
diff --git a/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h b/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h
deleted file mode 100644
index 6ef5b70e9948..000000000000
--- a/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/** @file
-
- Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- **/
-
-#ifndef _NORFLASHPLATFORMLIB_H_
-#define _NORFLASHPLATFORMLIB_H_
-
-typedef struct {
- UINTN DeviceBaseAddress; // Start address of the Device Base Address (DBA)
- UINTN RegionBaseAddress; // Start address of one single region
- UINTN Size;
- UINTN BlockSize;
-} NOR_FLASH_DESCRIPTION;
-
-EFI_STATUS
-NorFlashPlatformInitialization (
- VOID
- );
-
-EFI_STATUS
-NorFlashPlatformGetDevices (
- OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
- OUT UINT32 *Count
- );
-
-#endif /* _NORFLASHPLATFORMLIB_H_ */
diff --git a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c b/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c
deleted file mode 100644
index 6e11b23fdb3d..000000000000
--- a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/** @file
-
- Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- **/
-
-#include <Library/NorFlashPlatformLib.h>
-
-EFI_STATUS
-NorFlashPlatformInitialization (
- VOID
- )
-{
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashPlatformGetDevices (
- OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
- OUT UINT32 *Count
- )
-{
- *NorFlashDescriptions = NULL;
- *Count = 0;
- return EFI_SUCCESS;
-}
diff --git a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf b/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
deleted file mode 100644
index 3a2d5a171564..000000000000
--- a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
+++ /dev/null
@@ -1,24 +0,0 @@
-#/** @file
-#
-# Component description file for NorFlashPlatformNullLib module
-#
-# Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = NorFlashPlatformNullLib
- FILE_GUID = 29b733ad-d066-4df6-8a89-b9df1beb818a
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
- LIBRARY_CLASS = NorFlashPlatformLib
-
-[Sources.common]
- NorFlashPlatformNullLib.c
-
-[Packages]
- MdePkg/MdePkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
--
2.35.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 11/11] ArmPlatformPkg: Retire NorFlashDxe driver
2022-10-24 17:01 ` [PATCH 11/11] ArmPlatformPkg: Retire NorFlashDxe driver Ard Biesheuvel
@ 2022-10-25 16:32 ` Leif Lindholm
0 siblings, 0 replies; 16+ messages in thread
From: Leif Lindholm @ 2022-10-25 16:32 UTC (permalink / raw)
To: Ard Biesheuvel; +Cc: devel, Gerd Hoffmann, Sunil V L, Sami Mujawar
On Mon, Oct 24, 2022 at 19:01:22 +0200, Ard Biesheuvel wrote:
> The NorFlashDxe driver in ArmPlatformPkg was shared between development
> platforms built by ARM Ltd, and virtual platforms that were once modeled
> after Versatile Express, but have very little in common with actual bare
> metal implementations.
>
> Both sides have migrated to a domain specific version of the driver, so
> we can retire the old one.
>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
> ---
> ArmPlatformPkg/ArmPlatformPkg.dec | 6 -
> ArmPlatformPkg/ArmPlatformPkg.dsc | 6 -
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c | 991 --------------------
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h | 422 ---------
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c | 123 ---
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c | 506 ----------
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf | 71 --
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c | 777 ---------------
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c | 383 --------
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf | 66 --
> ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h | 30 -
> ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c | 28 -
> ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf | 24 -
> 13 files changed, 3433 deletions(-)
>
> diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec b/ArmPlatformPkg/ArmPlatformPkg.dec
> index dd6e78f62aa1..7b5d7e6cb520 100644
> --- a/ArmPlatformPkg/ArmPlatformPkg.dec
> +++ b/ArmPlatformPkg/ArmPlatformPkg.dec
> @@ -38,10 +38,6 @@ [LibraryClasses]
> #
> LcdPlatformLib|Include/Library/LcdPlatformLib.h
>
> - ## @libraryclass Provides a Nor flash interface.
> - #
> - NorFlashPlatformLib|Include/Library/NorFlashPlatformLib.h
> -
> ## @libraryclass Provides an interface to the clock of a PL011 device.
> #
> PL011UartClockLib|Include/Library/PL011UartClockLib.h
> @@ -56,8 +52,6 @@ [Guids.common]
> [PcdsFeatureFlag.common]
> gArmPlatformTokenSpaceGuid.PcdSendSgiToBringUpSecondaryCores|FALSE|BOOLEAN|0x00000004
>
> - gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked|FALSE|BOOLEAN|0x0000003C
> -
> # Disable the GOP controller on ExitBootServices(). By default the value is FALSE,
> # we assume the OS will handle the FrameBuffer from the UEFI GOP information.
> gArmPlatformTokenSpaceGuid.PcdGopDisableOnExitBootServices|FALSE|BOOLEAN|0x0000003D
> diff --git a/ArmPlatformPkg/ArmPlatformPkg.dsc b/ArmPlatformPkg/ArmPlatformPkg.dsc
> index 661a4cea220d..ddd128f9e606 100644
> --- a/ArmPlatformPkg/ArmPlatformPkg.dsc
> +++ b/ArmPlatformPkg/ArmPlatformPkg.dsc
> @@ -55,7 +55,6 @@ [LibraryClasses.common]
> LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
> MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
> MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
> - NorFlashPlatformLib|ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
> PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
> PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> @@ -100,7 +99,6 @@ [LibraryClasses.AARCH64.MM_STANDALONE]
>
> [Components.common]
> ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
> - ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
> ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
> ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
>
> @@ -109,7 +107,6 @@ [Components.common]
> ArmPlatformPkg/Library/HdLcd/HdLcd.inf
> ArmPlatformPkg/Library/LcdHwNullLib/LcdHwNullLib.inf
> ArmPlatformPkg/Library/LcdPlatformNullLib/LcdPlatformNullLib.inf
> - ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
> ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
> ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
> ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
> @@ -130,6 +127,3 @@ [Components.common]
> ArmPlatformPkg/PrePi/PeiUniCore.inf
>
> ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
> -
> -[Components.AARCH64]
> - ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c
> deleted file mode 100644
> index 1b431073ee93..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c
> +++ /dev/null
> @@ -1,991 +0,0 @@
> -/** @file NorFlash.c
> -
> - Copyright (c) 2011 - 2020, Arm Limited. All rights reserved.<BR>
> - Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#include <Library/BaseMemoryLib.h>
> -
> -#include "NorFlash.h"
> -
> -//
> -// Global variable declarations
> -//
> -extern NOR_FLASH_INSTANCE **mNorFlashInstances;
> -extern UINT32 mNorFlashDeviceCount;
> -
> -UINT32
> -NorFlashReadStatusRegister (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN SR_Address
> - )
> -{
> - // Prepare to read the status register
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_STATUS_REGISTER);
> - return MmioRead32 (Instance->DeviceBaseAddress);
> -}
> -
> -STATIC
> -BOOLEAN
> -NorFlashBlockIsLocked (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - )
> -{
> - UINT32 LockStatus;
> -
> - // Send command for reading device id
> - SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
> -
> - // Read block lock status
> - LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
> -
> - // Decode block lock status
> - LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
> -
> - if ((LockStatus & 0x2) != 0) {
> - DEBUG ((DEBUG_ERROR, "NorFlashBlockIsLocked: WARNING: Block LOCKED DOWN\n"));
> - }
> -
> - return ((LockStatus & 0x1) != 0);
> -}
> -
> -STATIC
> -EFI_STATUS
> -NorFlashUnlockSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - )
> -{
> - UINT32 LockStatus;
> -
> - // Raise the Task Priority Level to TPL_NOTIFY to serialise all its operations
> - // and to protect shared data structures.
> -
> - if (FeaturePcdGet (PcdNorFlashCheckBlockLocked) == TRUE) {
> - do {
> - // Request a lock setup
> - SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
> -
> - // Request an unlock
> - SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
> -
> - // Send command for reading device id
> - SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
> -
> - // Read block lock status
> - LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
> -
> - // Decode block lock status
> - LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
> - } while ((LockStatus & 0x1) == 1);
> - } else {
> - // Request a lock setup
> - SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
> -
> - // Request an unlock
> - SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
> -
> - // Wait until the status register gives us the all clear
> - do {
> - LockStatus = NorFlashReadStatusRegister (Instance, BlockAddress);
> - } while ((LockStatus & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
> - }
> -
> - // Put device back into Read Array mode
> - SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_READ_ARRAY);
> -
> - DEBUG ((DEBUG_BLKIO, "UnlockSingleBlock: BlockAddress=0x%08x\n", BlockAddress));
> -
> - return EFI_SUCCESS;
> -}
> -
> -EFI_STATUS
> -NorFlashUnlockSingleBlockIfNecessary (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - )
> -{
> - EFI_STATUS Status;
> -
> - Status = EFI_SUCCESS;
> -
> - if (NorFlashBlockIsLocked (Instance, BlockAddress)) {
> - Status = NorFlashUnlockSingleBlock (Instance, BlockAddress);
> - }
> -
> - return Status;
> -}
> -
> -/**
> - * The following function presumes that the block has already been unlocked.
> - **/
> -EFI_STATUS
> -NorFlashEraseSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - )
> -{
> - EFI_STATUS Status;
> - UINT32 StatusRegister;
> -
> - Status = EFI_SUCCESS;
> -
> - // Request a block erase and then confirm it
> - SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_SETUP);
> - SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_CONFIRM);
> -
> - // Wait until the status register gives us the all clear
> - do {
> - StatusRegister = NorFlashReadStatusRegister (Instance, BlockAddress);
> - } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
> -
> - if (StatusRegister & P30_SR_BIT_VPP) {
> - DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: VPP Range Error\n", BlockAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if ((StatusRegister & (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) == (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) {
> - DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Command Sequence Error\n", BlockAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (StatusRegister & P30_SR_BIT_ERASE) {
> - DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Erase Error StatusRegister:0x%X\n", BlockAddress, StatusRegister));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
> - // The debug level message has been reduced because a device lock might happen. In this case we just retry it ...
> - DEBUG ((DEBUG_INFO, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error\n", BlockAddress));
> - Status = EFI_WRITE_PROTECTED;
> - }
> -
> - if (EFI_ERROR (Status)) {
> - // Clear the Status Register
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
> - }
> -
> - // Put device back into Read Array mode
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -NorFlashWriteSingleWord (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN WordAddress,
> - IN UINT32 WriteData
> - )
> -{
> - EFI_STATUS Status;
> - UINT32 StatusRegister;
> -
> - Status = EFI_SUCCESS;
> -
> - // Request a write single word command
> - SEND_NOR_COMMAND (WordAddress, 0, P30_CMD_WORD_PROGRAM_SETUP);
> -
> - // Store the word into NOR Flash;
> - MmioWrite32 (WordAddress, WriteData);
> -
> - // Wait for the write to complete and then check for any errors; i.e. check the Status Register
> - do {
> - // Prepare to read the status register
> - StatusRegister = NorFlashReadStatusRegister (Instance, WordAddress);
> - // The chip is busy while the WRITE bit is not asserted
> - } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
> -
> - // Perform a full status check:
> - // Mask the relevant bits of Status Register.
> - // Everything should be zero, if not, we have a problem
> -
> - if (StatusRegister & P30_SR_BIT_VPP) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): VPP Range Error\n", WordAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (StatusRegister & P30_SR_BIT_PROGRAM) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Program Error\n", WordAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Device Protect Error\n", WordAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (!EFI_ERROR (Status)) {
> - // Clear the Status Register
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
> - }
> -
> - // Put device back into Read Array mode
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
> -
> - return Status;
> -}
> -
> -/*
> - * Writes data to the NOR Flash using the Buffered Programming method.
> - *
> - * The maximum size of the on-chip buffer is 32-words, because of hardware restrictions.
> - * Therefore this function will only handle buffers up to 32 words or 128 bytes.
> - * To deal with larger buffers, call this function again.
> - *
> - * This function presumes that both the TargetAddress and the TargetAddress+BufferSize
> - * exist entirely within the NOR Flash. Therefore these conditions will not be checked here.
> - *
> - * In buffered programming, if the target address not at the beginning of a 32-bit word boundary,
> - * then programming time is doubled and power consumption is increased.
> - * Therefore, it is a requirement to align buffer writes to 32-bit word boundaries.
> - * i.e. the last 4 bits of the target start address must be zero: 0x......00
> - */
> -EFI_STATUS
> -NorFlashWriteBuffer (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN TargetAddress,
> - IN UINTN BufferSizeInBytes,
> - IN UINT32 *Buffer
> - )
> -{
> - EFI_STATUS Status;
> - UINTN BufferSizeInWords;
> - UINTN Count;
> - volatile UINT32 *Data;
> - UINTN WaitForBuffer;
> - BOOLEAN BufferAvailable;
> - UINT32 StatusRegister;
> -
> - WaitForBuffer = MAX_BUFFERED_PROG_ITERATIONS;
> - BufferAvailable = FALSE;
> -
> - // Check that the target address does not cross a 32-word boundary.
> - if ((TargetAddress & BOUNDARY_OF_32_WORDS) != 0) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - // Check there are some data to program
> - if (BufferSizeInBytes == 0) {
> - return EFI_BUFFER_TOO_SMALL;
> - }
> -
> - // Check that the buffer size does not exceed the maximum hardware buffer size on chip.
> - if (BufferSizeInBytes > P30_MAX_BUFFER_SIZE_IN_BYTES) {
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // Check that the buffer size is a multiple of 32-bit words
> - if ((BufferSizeInBytes % 4) != 0) {
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // Pre-programming conditions checked, now start the algorithm.
> -
> - // Prepare the data destination address
> - Data = (UINT32 *)TargetAddress;
> -
> - // Check the availability of the buffer
> - do {
> - // Issue the Buffered Program Setup command
> - SEND_NOR_COMMAND (TargetAddress, 0, P30_CMD_BUFFERED_PROGRAM_SETUP);
> -
> - // Read back the status register bit#7 from the same address
> - if (((*Data) & P30_SR_BIT_WRITE) == P30_SR_BIT_WRITE) {
> - BufferAvailable = TRUE;
> - }
> -
> - // Update the loop counter
> - WaitForBuffer--;
> - } while ((WaitForBuffer > 0) && (BufferAvailable == FALSE));
> -
> - // The buffer was not available for writing
> - if (WaitForBuffer == 0) {
> - Status = EFI_DEVICE_ERROR;
> - goto EXIT;
> - }
> -
> - // From now on we work in 32-bit words
> - BufferSizeInWords = BufferSizeInBytes / (UINTN)4;
> -
> - // Write the word count, which is (buffer_size_in_words - 1),
> - // because word count 0 means one word.
> - SEND_NOR_COMMAND (TargetAddress, 0, (BufferSizeInWords - 1));
> -
> - // Write the data to the NOR Flash, advancing each address by 4 bytes
> - for (Count = 0; Count < BufferSizeInWords; Count++, Data++, Buffer++) {
> - MmioWrite32 ((UINTN)Data, *Buffer);
> - }
> -
> - // Issue the Buffered Program Confirm command, to start the programming operation
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_BUFFERED_PROGRAM_CONFIRM);
> -
> - // Wait for the write to complete and then check for any errors; i.e. check the Status Register
> - do {
> - StatusRegister = NorFlashReadStatusRegister (Instance, TargetAddress);
> - // The chip is busy while the WRITE bit is not asserted
> - } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
> -
> - // Perform a full status check:
> - // Mask the relevant bits of Status Register.
> - // Everything should be zero, if not, we have a problem
> -
> - Status = EFI_SUCCESS;
> -
> - if (StatusRegister & P30_SR_BIT_VPP) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): VPP Range Error\n", TargetAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (StatusRegister & P30_SR_BIT_PROGRAM) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Program Error\n", TargetAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Device Protect Error\n", TargetAddress));
> - Status = EFI_DEVICE_ERROR;
> - }
> -
> - if (!EFI_ERROR (Status)) {
> - // Clear the Status Register
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
> - }
> -
> -EXIT:
> - // Put device back into Read Array mode
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -NorFlashWriteBlocks (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - IN VOID *Buffer
> - )
> -{
> - UINT32 *pWriteBuffer;
> - EFI_STATUS Status;
> - EFI_LBA CurrentBlock;
> - UINT32 BlockSizeInWords;
> - UINT32 NumBlocks;
> - UINT32 BlockCount;
> -
> - Status = EFI_SUCCESS;
> -
> - // The buffer must be valid
> - if (Buffer == NULL) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - if (Instance->Media.ReadOnly == TRUE) {
> - return EFI_WRITE_PROTECTED;
> - }
> -
> - // We must have some bytes to read
> - DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BufferSizeInBytes=0x%x\n", BufferSizeInBytes));
> - if (BufferSizeInBytes == 0) {
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // The size of the buffer must be a multiple of the block size
> - DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BlockSize in bytes =0x%x\n", Instance->Media.BlockSize));
> - if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // All blocks must be within the device
> - NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: NumBlocks=%d, LastBlock=%ld, Lba=%ld.\n", NumBlocks, Instance->Media.LastBlock, Lba));
> -
> - if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteBlocks: ERROR - Write will exceed last block.\n"));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - BlockSizeInWords = Instance->Media.BlockSize / 4;
> -
> - // Because the target *Buffer is a pointer to VOID, we must put all the data into a pointer
> - // to a proper data type, so use *ReadBuffer
> - pWriteBuffer = (UINT32 *)Buffer;
> -
> - CurrentBlock = Lba;
> - for (BlockCount = 0; BlockCount < NumBlocks; BlockCount++, CurrentBlock++, pWriteBuffer = pWriteBuffer + BlockSizeInWords) {
> - DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Writing block #%d\n", (UINTN)CurrentBlock));
> -
> - Status = NorFlashWriteFullBlock (Instance, CurrentBlock, pWriteBuffer, BlockSizeInWords);
> -
> - if (EFI_ERROR (Status)) {
> - break;
> - }
> - }
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Exit Status = \"%r\".\n", Status));
> - return Status;
> -}
> -
> -#define BOTH_ALIGNED(a, b, align) ((((UINTN)(a) | (UINTN)(b)) & ((align) - 1)) == 0)
> -
> -/**
> - Copy Length bytes from Source to Destination, using aligned accesses only.
> - Note that this implementation uses memcpy() semantics rather then memmove()
> - semantics, i.e., SourceBuffer and DestinationBuffer should not overlap.
> -
> - @param DestinationBuffer The target of the copy request.
> - @param SourceBuffer The place to copy from.
> - @param Length The number of bytes to copy.
> -
> - @return Destination
> -
> -**/
> -STATIC
> -VOID *
> -AlignedCopyMem (
> - OUT VOID *DestinationBuffer,
> - IN CONST VOID *SourceBuffer,
> - IN UINTN Length
> - )
> -{
> - UINT8 *Destination8;
> - CONST UINT8 *Source8;
> - UINT32 *Destination32;
> - CONST UINT32 *Source32;
> - UINT64 *Destination64;
> - CONST UINT64 *Source64;
> -
> - if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 8) && (Length >= 8)) {
> - Destination64 = DestinationBuffer;
> - Source64 = SourceBuffer;
> - while (Length >= 8) {
> - *Destination64++ = *Source64++;
> - Length -= 8;
> - }
> -
> - Destination8 = (UINT8 *)Destination64;
> - Source8 = (CONST UINT8 *)Source64;
> - } else if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 4) && (Length >= 4)) {
> - Destination32 = DestinationBuffer;
> - Source32 = SourceBuffer;
> - while (Length >= 4) {
> - *Destination32++ = *Source32++;
> - Length -= 4;
> - }
> -
> - Destination8 = (UINT8 *)Destination32;
> - Source8 = (CONST UINT8 *)Source32;
> - } else {
> - Destination8 = DestinationBuffer;
> - Source8 = SourceBuffer;
> - }
> -
> - while (Length-- != 0) {
> - *Destination8++ = *Source8++;
> - }
> -
> - return DestinationBuffer;
> -}
> -
> -EFI_STATUS
> -NorFlashReadBlocks (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - OUT VOID *Buffer
> - )
> -{
> - UINT32 NumBlocks;
> - UINTN StartAddress;
> -
> - DEBUG ((
> - DEBUG_BLKIO,
> - "NorFlashReadBlocks: BufferSize=0x%xB BlockSize=0x%xB LastBlock=%ld, Lba=%ld.\n",
> - BufferSizeInBytes,
> - Instance->Media.BlockSize,
> - Instance->Media.LastBlock,
> - Lba
> - ));
> -
> - // The buffer must be valid
> - if (Buffer == NULL) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - // Return if we have not any byte to read
> - if (BufferSizeInBytes == 0) {
> - return EFI_SUCCESS;
> - }
> -
> - // The size of the buffer must be a multiple of the block size
> - if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // All blocks must be within the device
> - NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
> -
> - if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashReadBlocks: ERROR - Read will exceed last block\n"));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - // Get the address to start reading from
> - StartAddress = GET_NOR_BLOCK_ADDRESS (
> - Instance->RegionBaseAddress,
> - Lba,
> - Instance->Media.BlockSize
> - );
> -
> - // Put the device into Read Array mode
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
> -
> - // Readout the data
> - AlignedCopyMem (Buffer, (VOID *)StartAddress, BufferSizeInBytes);
> -
> - return EFI_SUCCESS;
> -}
> -
> -EFI_STATUS
> -NorFlashRead (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN UINTN BufferSizeInBytes,
> - OUT VOID *Buffer
> - )
> -{
> - UINTN StartAddress;
> -
> - // The buffer must be valid
> - if (Buffer == NULL) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - // Return if we have not any byte to read
> - if (BufferSizeInBytes == 0) {
> - return EFI_SUCCESS;
> - }
> -
> - if (((Lba * Instance->Media.BlockSize) + Offset + BufferSizeInBytes) > Instance->Size) {
> - DEBUG ((DEBUG_ERROR, "NorFlashRead: ERROR - Read will exceed device size.\n"));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - // Get the address to start reading from
> - StartAddress = GET_NOR_BLOCK_ADDRESS (
> - Instance->RegionBaseAddress,
> - Lba,
> - Instance->Media.BlockSize
> - );
> -
> - // Put the device into Read Array mode
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
> -
> - // Readout the data
> - AlignedCopyMem (Buffer, (VOID *)(StartAddress + Offset), BufferSizeInBytes);
> -
> - return EFI_SUCCESS;
> -}
> -
> -/*
> - Write a full or portion of a block. It must not span block boundaries; that is,
> - Offset + *NumBytes <= Instance->Media.BlockSize.
> -*/
> -EFI_STATUS
> -NorFlashWriteSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN OUT UINTN *NumBytes,
> - IN UINT8 *Buffer
> - )
> -{
> - EFI_STATUS TempStatus;
> - UINT32 Tmp;
> - UINT32 TmpBuf;
> - UINT32 WordToWrite;
> - UINT32 Mask;
> - BOOLEAN DoErase;
> - UINTN BytesToWrite;
> - UINTN CurOffset;
> - UINTN WordAddr;
> - UINTN BlockSize;
> - UINTN BlockAddress;
> - UINTN PrevBlockAddress;
> -
> - PrevBlockAddress = 0;
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashWriteSingleBlock(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Lba, Offset, *NumBytes, Buffer));
> -
> - // Detect WriteDisabled state
> - if (Instance->Media.ReadOnly == TRUE) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - Can not write: Device is in WriteDisabled state.\n"));
> - // It is in WriteDisabled state, return an error right away
> - return EFI_ACCESS_DENIED;
> - }
> -
> - // Cache the block size to avoid de-referencing pointers all the time
> - BlockSize = Instance->Media.BlockSize;
> -
> - // The write must not span block boundaries.
> - // We need to check each variable individually because adding two large values together overflows.
> - if ((Offset >= BlockSize) ||
> - (*NumBytes > BlockSize) ||
> - ((Offset + *NumBytes) > BlockSize))
> - {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // We must have some bytes to write
> - if (*NumBytes == 0) {
> - DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // Pick 128bytes as a good start for word operations as opposed to erasing the
> - // block and writing the data regardless if an erase is really needed.
> - // It looks like most individual NV variable writes are smaller than 128bytes.
> - if (*NumBytes <= 128) {
> - // Check to see if we need to erase before programming the data into NOR.
> - // If the destination bits are only changing from 1s to 0s we can just write.
> - // After a block is erased all bits in the block is set to 1.
> - // If any byte requires us to erase we just give up and rewrite all of it.
> - DoErase = FALSE;
> - BytesToWrite = *NumBytes;
> - CurOffset = Offset;
> -
> - while (BytesToWrite > 0) {
> - // Read full word from NOR, splice as required. A word is the smallest
> - // unit we can write.
> - TempStatus = NorFlashRead (Instance, Lba, CurOffset & ~(0x3), sizeof (Tmp), &Tmp);
> - if (EFI_ERROR (TempStatus)) {
> - return EFI_DEVICE_ERROR;
> - }
> -
> - // Physical address of word in NOR to write.
> - WordAddr = (CurOffset & ~(0x3)) + GET_NOR_BLOCK_ADDRESS (
> - Instance->RegionBaseAddress,
> - Lba,
> - BlockSize
> - );
> - // The word of data that is to be written.
> - TmpBuf = *((UINT32 *)(Buffer + (*NumBytes - BytesToWrite)));
> -
> - // First do word aligned chunks.
> - if ((CurOffset & 0x3) == 0) {
> - if (BytesToWrite >= 4) {
> - // Is the destination still in 'erased' state?
> - if (~Tmp != 0) {
> - // Check to see if we are only changing bits to zero.
> - if ((Tmp ^ TmpBuf) & TmpBuf) {
> - DoErase = TRUE;
> - break;
> - }
> - }
> -
> - // Write this word to NOR
> - WordToWrite = TmpBuf;
> - CurOffset += sizeof (TmpBuf);
> - BytesToWrite -= sizeof (TmpBuf);
> - } else {
> - // BytesToWrite < 4. Do small writes and left-overs
> - Mask = ~((~0) << (BytesToWrite * 8));
> - // Mask out the bytes we want.
> - TmpBuf &= Mask;
> - // Is the destination still in 'erased' state?
> - if ((Tmp & Mask) != Mask) {
> - // Check to see if we are only changing bits to zero.
> - if ((Tmp ^ TmpBuf) & TmpBuf) {
> - DoErase = TRUE;
> - break;
> - }
> - }
> -
> - // Merge old and new data. Write merged word to NOR
> - WordToWrite = (Tmp & ~Mask) | TmpBuf;
> - CurOffset += BytesToWrite;
> - BytesToWrite = 0;
> - }
> - } else {
> - // Do multiple words, but starting unaligned.
> - if (BytesToWrite > (4 - (CurOffset & 0x3))) {
> - Mask = ((~0) << ((CurOffset & 0x3) * 8));
> - // Mask out the bytes we want.
> - TmpBuf &= Mask;
> - // Is the destination still in 'erased' state?
> - if ((Tmp & Mask) != Mask) {
> - // Check to see if we are only changing bits to zero.
> - if ((Tmp ^ TmpBuf) & TmpBuf) {
> - DoErase = TRUE;
> - break;
> - }
> - }
> -
> - // Merge old and new data. Write merged word to NOR
> - WordToWrite = (Tmp & ~Mask) | TmpBuf;
> - BytesToWrite -= (4 - (CurOffset & 0x3));
> - CurOffset += (4 - (CurOffset & 0x3));
> - } else {
> - // Unaligned and fits in one word.
> - Mask = (~((~0) << (BytesToWrite * 8))) << ((CurOffset & 0x3) * 8);
> - // Mask out the bytes we want.
> - TmpBuf = (TmpBuf << ((CurOffset & 0x3) * 8)) & Mask;
> - // Is the destination still in 'erased' state?
> - if ((Tmp & Mask) != Mask) {
> - // Check to see if we are only changing bits to zero.
> - if ((Tmp ^ TmpBuf) & TmpBuf) {
> - DoErase = TRUE;
> - break;
> - }
> - }
> -
> - // Merge old and new data. Write merged word to NOR
> - WordToWrite = (Tmp & ~Mask) | TmpBuf;
> - CurOffset += BytesToWrite;
> - BytesToWrite = 0;
> - }
> - }
> -
> - //
> - // Write the word to NOR.
> - //
> -
> - BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSize);
> - if (BlockAddress != PrevBlockAddress) {
> - TempStatus = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
> - if (EFI_ERROR (TempStatus)) {
> - return EFI_DEVICE_ERROR;
> - }
> -
> - PrevBlockAddress = BlockAddress;
> - }
> -
> - TempStatus = NorFlashWriteSingleWord (Instance, WordAddr, WordToWrite);
> - if (EFI_ERROR (TempStatus)) {
> - return EFI_DEVICE_ERROR;
> - }
> - }
> -
> - // Exit if we got here and could write all the data. Otherwise do the
> - // Erase-Write cycle.
> - if (!DoErase) {
> - return EFI_SUCCESS;
> - }
> - }
> -
> - // Check we did get some memory. Buffer is BlockSize.
> - if (Instance->ShadowBuffer == NULL) {
> - DEBUG ((DEBUG_ERROR, "FvbWrite: ERROR - Buffer not ready\n"));
> - return EFI_DEVICE_ERROR;
> - }
> -
> - // Read NOR Flash data into shadow buffer
> - TempStatus = NorFlashReadBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
> - if (EFI_ERROR (TempStatus)) {
> - // Return one of the pre-approved error statuses
> - return EFI_DEVICE_ERROR;
> - }
> -
> - // Put the data at the appropriate location inside the buffer area
> - CopyMem ((VOID *)((UINTN)Instance->ShadowBuffer + Offset), Buffer, *NumBytes);
> -
> - // Write the modified buffer back to the NorFlash
> - TempStatus = NorFlashWriteBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
> - if (EFI_ERROR (TempStatus)) {
> - // Return one of the pre-approved error statuses
> - return EFI_DEVICE_ERROR;
> - }
> -
> - return EFI_SUCCESS;
> -}
> -
> -/*
> - Although DiskIoDxe will automatically install the DiskIO protocol whenever
> - we install the BlockIO protocol, its implementation is sub-optimal as it reads
> - and writes entire blocks using the BlockIO protocol. In fact we can access
> - NOR flash with a finer granularity than that, so we can improve performance
> - by directly producing the DiskIO protocol.
> -*/
> -
> -/**
> - Read BufferSize bytes from Offset into Buffer.
> -
> - @param This Protocol instance pointer.
> - @param MediaId Id of the media, changes every time the media is replaced.
> - @param Offset The starting byte offset to read from
> - @param BufferSize Size of Buffer
> - @param Buffer Buffer containing read data
> -
> - @retval EFI_SUCCESS The data was read correctly from the device.
> - @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
> - @retval EFI_NO_MEDIA There is no media in the device.
> - @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
> - @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
> - valid for the device.
> -
> -**/
> -EFI_STATUS
> -EFIAPI
> -NorFlashDiskIoReadDisk (
> - IN EFI_DISK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN UINT64 DiskOffset,
> - IN UINTN BufferSize,
> - OUT VOID *Buffer
> - )
> -{
> - NOR_FLASH_INSTANCE *Instance;
> - UINT32 BlockSize;
> - UINT32 BlockOffset;
> - EFI_LBA Lba;
> -
> - Instance = INSTANCE_FROM_DISKIO_THIS (This);
> -
> - if (MediaId != Instance->Media.MediaId) {
> - return EFI_MEDIA_CHANGED;
> - }
> -
> - BlockSize = Instance->Media.BlockSize;
> - Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
> -
> - return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
> -}
> -
> -/**
> - Writes a specified number of bytes to a device.
> -
> - @param This Indicates a pointer to the calling context.
> - @param MediaId ID of the medium to be written.
> - @param Offset The starting byte offset on the logical block I/O device to write.
> - @param BufferSize The size in bytes of Buffer. The number of bytes to write to the device.
> - @param Buffer A pointer to the buffer containing the data to be written.
> -
> - @retval EFI_SUCCESS The data was written correctly to the device.
> - @retval EFI_WRITE_PROTECTED The device can not be written to.
> - @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
> - @retval EFI_NO_MEDIA There is no media in the device.
> - @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
> - @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not
> - valid for the device.
> -
> -**/
> -EFI_STATUS
> -EFIAPI
> -NorFlashDiskIoWriteDisk (
> - IN EFI_DISK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN UINT64 DiskOffset,
> - IN UINTN BufferSize,
> - IN VOID *Buffer
> - )
> -{
> - NOR_FLASH_INSTANCE *Instance;
> - UINT32 BlockSize;
> - UINT32 BlockOffset;
> - EFI_LBA Lba;
> - UINTN RemainingBytes;
> - UINTN WriteSize;
> - EFI_STATUS Status;
> -
> - Instance = INSTANCE_FROM_DISKIO_THIS (This);
> -
> - if (MediaId != Instance->Media.MediaId) {
> - return EFI_MEDIA_CHANGED;
> - }
> -
> - BlockSize = Instance->Media.BlockSize;
> - Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
> -
> - RemainingBytes = BufferSize;
> -
> - // Write either all the remaining bytes, or the number of bytes that bring
> - // us up to a block boundary, whichever is less.
> - // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
> - // block boundary (even if it is already on one).
> - WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset);
> -
> - do {
> - if (WriteSize == BlockSize) {
> - // Write a full block
> - Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32));
> - } else {
> - // Write a partial block
> - Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer);
> - }
> -
> - if (EFI_ERROR (Status)) {
> - return Status;
> - }
> -
> - // Now continue writing either all the remaining bytes or single blocks.
> - RemainingBytes -= WriteSize;
> - Buffer = (UINT8 *)Buffer + WriteSize;
> - Lba++;
> - BlockOffset = 0;
> - WriteSize = MIN (RemainingBytes, BlockSize);
> - } while (RemainingBytes);
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -NorFlashReset (
> - IN NOR_FLASH_INSTANCE *Instance
> - )
> -{
> - // As there is no specific RESET to perform, ensure that the devices is in the default Read Array mode
> - SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - Fixup internal data so that EFI can be call in virtual mode.
> - Call the passed in Child Notify event and convert any pointers in
> - lib to virtual mode.
> -
> - @param[in] Event The Event that is being processed
> - @param[in] Context Event Context
> -**/
> -VOID
> -EFIAPI
> -NorFlashVirtualNotifyEvent (
> - IN EFI_EVENT Event,
> - IN VOID *Context
> - )
> -{
> - UINTN Index;
> -
> - for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->DeviceBaseAddress);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->RegionBaseAddress);
> -
> - // Convert BlockIo protocol
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.FlushBlocks);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.ReadBlocks);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.Reset);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.WriteBlocks);
> -
> - // Convert Fvb
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.EraseBlocks);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetAttributes);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetBlockSize);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetPhysicalAddress);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Read);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.SetAttributes);
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Write);
> -
> - if (mNorFlashInstances[Index]->ShadowBuffer != NULL) {
> - EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->ShadowBuffer);
> - }
> - }
> -
> - return;
> -}
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h
> deleted file mode 100644
> index c83032e87d9c..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h
> +++ /dev/null
> @@ -1,422 +0,0 @@
> -/** @file NorFlash.h
> -
> - Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#ifndef __NOR_FLASH_H__
> -#define __NOR_FLASH_H__
> -
> -#include <Base.h>
> -#include <PiDxe.h>
> -
> -#include <Guid/EventGroup.h>
> -
> -#include <Protocol/BlockIo.h>
> -#include <Protocol/DiskIo.h>
> -#include <Protocol/FirmwareVolumeBlock.h>
> -
> -#include <Library/DebugLib.h>
> -#include <Library/IoLib.h>
> -#include <Library/NorFlashPlatformLib.h>
> -#include <Library/UefiLib.h>
> -#include <Library/UefiRuntimeLib.h>
> -
> -#define NOR_FLASH_ERASE_RETRY 10
> -
> -// Device access macros
> -// These are necessary because we use 2 x 16bit parts to make up 32bit data
> -
> -#define HIGH_16_BITS 0xFFFF0000
> -#define LOW_16_BITS 0x0000FFFF
> -#define LOW_8_BITS 0x000000FF
> -
> -#define FOLD_32BIT_INTO_16BIT(value) ( ( value >> 16 ) | ( value & LOW_16_BITS ) )
> -
> -#define GET_LOW_BYTE(value) ( value & LOW_8_BITS )
> -#define GET_HIGH_BYTE(value) ( GET_LOW_BYTE( value >> 16 ) )
> -
> -// Each command must be sent simultaneously to both chips,
> -// i.e. at the lower 16 bits AND at the higher 16 bits
> -#define CREATE_NOR_ADDRESS(BaseAddr, OffsetAddr) ((BaseAddr) + ((OffsetAddr) << 2))
> -#define CREATE_DUAL_CMD(Cmd) ( ( Cmd << 16) | ( Cmd & LOW_16_BITS) )
> -#define SEND_NOR_COMMAND(BaseAddr, Offset, Cmd) MmioWrite32 (CREATE_NOR_ADDRESS(BaseAddr,Offset), CREATE_DUAL_CMD(Cmd))
> -#define GET_NOR_BLOCK_ADDRESS(BaseAddr, Lba, LbaSize) ( BaseAddr + (UINTN)((Lba) * LbaSize) )
> -
> -// Status Register Bits
> -#define P30_SR_BIT_WRITE (BIT7 << 16 | BIT7)
> -#define P30_SR_BIT_ERASE_SUSPEND (BIT6 << 16 | BIT6)
> -#define P30_SR_BIT_ERASE (BIT5 << 16 | BIT5)
> -#define P30_SR_BIT_PROGRAM (BIT4 << 16 | BIT4)
> -#define P30_SR_BIT_VPP (BIT3 << 16 | BIT3)
> -#define P30_SR_BIT_PROGRAM_SUSPEND (BIT2 << 16 | BIT2)
> -#define P30_SR_BIT_BLOCK_LOCKED (BIT1 << 16 | BIT1)
> -#define P30_SR_BIT_BEFP (BIT0 << 16 | BIT0)
> -
> -// Device Commands for Intel StrataFlash(R) Embedded Memory (P30) Family
> -
> -// On chip buffer size for buffered programming operations
> -// There are 2 chips, each chip can buffer up to 32 (16-bit)words, and each word is 2 bytes.
> -// Therefore the total size of the buffer is 2 x 32 x 2 = 128 bytes
> -#define P30_MAX_BUFFER_SIZE_IN_BYTES ((UINTN)128)
> -#define P30_MAX_BUFFER_SIZE_IN_WORDS (P30_MAX_BUFFER_SIZE_IN_BYTES/((UINTN)4))
> -#define MAX_BUFFERED_PROG_ITERATIONS 10000000
> -#define BOUNDARY_OF_32_WORDS 0x7F
> -
> -// CFI Addresses
> -#define P30_CFI_ADDR_QUERY_UNIQUE_QRY 0x10
> -#define P30_CFI_ADDR_VENDOR_ID 0x13
> -
> -// CFI Data
> -#define CFI_QRY 0x00595251
> -
> -// READ Commands
> -#define P30_CMD_READ_DEVICE_ID 0x0090
> -#define P30_CMD_READ_STATUS_REGISTER 0x0070
> -#define P30_CMD_CLEAR_STATUS_REGISTER 0x0050
> -#define P30_CMD_READ_ARRAY 0x00FF
> -#define P30_CMD_READ_CFI_QUERY 0x0098
> -
> -// WRITE Commands
> -#define P30_CMD_WORD_PROGRAM_SETUP 0x0040
> -#define P30_CMD_ALTERNATE_WORD_PROGRAM_SETUP 0x0010
> -#define P30_CMD_BUFFERED_PROGRAM_SETUP 0x00E8
> -#define P30_CMD_BUFFERED_PROGRAM_CONFIRM 0x00D0
> -#define P30_CMD_BEFP_SETUP 0x0080
> -#define P30_CMD_BEFP_CONFIRM 0x00D0
> -
> -// ERASE Commands
> -#define P30_CMD_BLOCK_ERASE_SETUP 0x0020
> -#define P30_CMD_BLOCK_ERASE_CONFIRM 0x00D0
> -
> -// SUSPEND Commands
> -#define P30_CMD_PROGRAM_OR_ERASE_SUSPEND 0x00B0
> -#define P30_CMD_SUSPEND_RESUME 0x00D0
> -
> -// BLOCK LOCKING / UNLOCKING Commands
> -#define P30_CMD_LOCK_BLOCK_SETUP 0x0060
> -#define P30_CMD_LOCK_BLOCK 0x0001
> -#define P30_CMD_UNLOCK_BLOCK 0x00D0
> -#define P30_CMD_LOCK_DOWN_BLOCK 0x002F
> -
> -// PROTECTION Commands
> -#define P30_CMD_PROGRAM_PROTECTION_REGISTER_SETUP 0x00C0
> -
> -// CONFIGURATION Commands
> -#define P30_CMD_READ_CONFIGURATION_REGISTER_SETUP 0x0060
> -#define P30_CMD_READ_CONFIGURATION_REGISTER 0x0003
> -
> -#define NOR_FLASH_SIGNATURE SIGNATURE_32('n', 'o', 'r', '0')
> -#define INSTANCE_FROM_FVB_THIS(a) CR(a, NOR_FLASH_INSTANCE, FvbProtocol, NOR_FLASH_SIGNATURE)
> -#define INSTANCE_FROM_BLKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, BlockIoProtocol, NOR_FLASH_SIGNATURE)
> -#define INSTANCE_FROM_DISKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, DiskIoProtocol, NOR_FLASH_SIGNATURE)
> -
> -typedef struct _NOR_FLASH_INSTANCE NOR_FLASH_INSTANCE;
> -
> -#pragma pack (1)
> -typedef struct {
> - VENDOR_DEVICE_PATH Vendor;
> - UINT8 Index;
> - EFI_DEVICE_PATH_PROTOCOL End;
> -} NOR_FLASH_DEVICE_PATH;
> -#pragma pack ()
> -
> -struct _NOR_FLASH_INSTANCE {
> - UINT32 Signature;
> - EFI_HANDLE Handle;
> -
> - UINTN DeviceBaseAddress;
> - UINTN RegionBaseAddress;
> - UINTN Size;
> - EFI_LBA StartLba;
> -
> - EFI_BLOCK_IO_PROTOCOL BlockIoProtocol;
> - EFI_BLOCK_IO_MEDIA Media;
> - EFI_DISK_IO_PROTOCOL DiskIoProtocol;
> -
> - EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL FvbProtocol;
> - VOID *ShadowBuffer;
> -
> - NOR_FLASH_DEVICE_PATH DevicePath;
> -};
> -
> -EFI_STATUS
> -NorFlashReadCfiData (
> - IN UINTN DeviceBaseAddress,
> - IN UINTN CFI_Offset,
> - IN UINT32 NumberOfBytes,
> - OUT UINT32 *Data
> - );
> -
> -EFI_STATUS
> -NorFlashWriteBuffer (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN TargetAddress,
> - IN UINTN BufferSizeInBytes,
> - IN UINT32 *Buffer
> - );
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoReset (
> - IN EFI_BLOCK_IO_PROTOCOL *This,
> - IN BOOLEAN ExtendedVerification
> - );
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoReadBlocks (
> - IN EFI_BLOCK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - OUT VOID *Buffer
> - );
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoWriteBlocks (
> - IN EFI_BLOCK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - IN VOID *Buffer
> - );
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoFlushBlocks (
> - IN EFI_BLOCK_IO_PROTOCOL *This
> - );
> -
> -//
> -// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.ReadDisk
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashDiskIoReadDisk (
> - IN EFI_DISK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN UINT64 Offset,
> - IN UINTN BufferSize,
> - OUT VOID *Buffer
> - );
> -
> -//
> -// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.WriteDisk
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashDiskIoWriteDisk (
> - IN EFI_DISK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN UINT64 Offset,
> - IN UINTN BufferSize,
> - IN VOID *Buffer
> - );
> -
> -//
> -// NorFlashFvbDxe.c
> -//
> -
> -EFI_STATUS
> -EFIAPI
> -FvbGetAttributes (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - OUT EFI_FVB_ATTRIBUTES_2 *Attributes
> - );
> -
> -EFI_STATUS
> -EFIAPI
> -FvbSetAttributes (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
> - );
> -
> -EFI_STATUS
> -EFIAPI
> -FvbGetPhysicalAddress (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - OUT EFI_PHYSICAL_ADDRESS *Address
> - );
> -
> -EFI_STATUS
> -EFIAPI
> -FvbGetBlockSize (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN EFI_LBA Lba,
> - OUT UINTN *BlockSize,
> - OUT UINTN *NumberOfBlocks
> - );
> -
> -EFI_STATUS
> -EFIAPI
> -FvbRead (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN OUT UINTN *NumBytes,
> - IN OUT UINT8 *Buffer
> - );
> -
> -EFI_STATUS
> -EFIAPI
> -FvbWrite (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN OUT UINTN *NumBytes,
> - IN UINT8 *Buffer
> - );
> -
> -EFI_STATUS
> -EFIAPI
> -FvbEraseBlocks (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - ...
> - );
> -
> -EFI_STATUS
> -ValidateFvHeader (
> - IN NOR_FLASH_INSTANCE *Instance
> - );
> -
> -EFI_STATUS
> -InitializeFvAndVariableStoreHeaders (
> - IN NOR_FLASH_INSTANCE *Instance
> - );
> -
> -VOID
> -EFIAPI
> -FvbVirtualNotifyEvent (
> - IN EFI_EVENT Event,
> - IN VOID *Context
> - );
> -
> -//
> -// NorFlashDxe.c
> -//
> -
> -EFI_STATUS
> -NorFlashWriteFullBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINT32 *DataBuffer,
> - IN UINT32 BlockSizeInWords
> - );
> -
> -EFI_STATUS
> -NorFlashUnlockAndEraseSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - );
> -
> -EFI_STATUS
> -NorFlashCreateInstance (
> - IN UINTN NorFlashDeviceBase,
> - IN UINTN NorFlashRegionBase,
> - IN UINTN NorFlashSize,
> - IN UINT32 Index,
> - IN UINT32 BlockSize,
> - IN BOOLEAN SupportFvb,
> - OUT NOR_FLASH_INSTANCE **NorFlashInstance
> - );
> -
> -EFI_STATUS
> -EFIAPI
> -NorFlashFvbInitialize (
> - IN NOR_FLASH_INSTANCE *Instance
> - );
> -
> -//
> -// NorFlash.c
> -//
> -EFI_STATUS
> -NorFlashWriteSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN OUT UINTN *NumBytes,
> - IN UINT8 *Buffer
> - );
> -
> -EFI_STATUS
> -NorFlashWriteBlocks (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - IN VOID *Buffer
> - );
> -
> -EFI_STATUS
> -NorFlashReadBlocks (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - OUT VOID *Buffer
> - );
> -
> -EFI_STATUS
> -NorFlashRead (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN UINTN BufferSizeInBytes,
> - OUT VOID *Buffer
> - );
> -
> -EFI_STATUS
> -NorFlashWrite (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN OUT UINTN *NumBytes,
> - IN UINT8 *Buffer
> - );
> -
> -EFI_STATUS
> -NorFlashReset (
> - IN NOR_FLASH_INSTANCE *Instance
> - );
> -
> -EFI_STATUS
> -NorFlashEraseSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - );
> -
> -EFI_STATUS
> -NorFlashUnlockSingleBlockIfNecessary (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - );
> -
> -EFI_STATUS
> -NorFlashWriteSingleWord (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN WordAddress,
> - IN UINT32 WriteData
> - );
> -
> -VOID
> -EFIAPI
> -NorFlashVirtualNotifyEvent (
> - IN EFI_EVENT Event,
> - IN VOID *Context
> - );
> -
> -#endif /* __NOR_FLASH_H__ */
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
> deleted file mode 100644
> index 9d4732c6905a..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
> +++ /dev/null
> @@ -1,123 +0,0 @@
> -/** @file NorFlashBlockIoDxe.c
> -
> - Copyright (c) 2011-2013, ARM Ltd. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#include <Library/BaseMemoryLib.h>
> -#include <Library/UefiBootServicesTableLib.h>
> -
> -#include "NorFlash.h"
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoReset (
> - IN EFI_BLOCK_IO_PROTOCOL *This,
> - IN BOOLEAN ExtendedVerification
> - )
> -{
> - NOR_FLASH_INSTANCE *Instance;
> -
> - Instance = INSTANCE_FROM_BLKIO_THIS (This);
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReset(MediaId=0x%x)\n", This->Media->MediaId));
> -
> - return NorFlashReset (Instance);
> -}
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoReadBlocks (
> - IN EFI_BLOCK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - OUT VOID *Buffer
> - )
> -{
> - NOR_FLASH_INSTANCE *Instance;
> - EFI_STATUS Status;
> - EFI_BLOCK_IO_MEDIA *Media;
> -
> - if (This == NULL) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - Instance = INSTANCE_FROM_BLKIO_THIS (This);
> - Media = This->Media;
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReadBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes (%d kB), BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, BufferSizeInBytes, Buffer));
> -
> - if (!Media) {
> - Status = EFI_INVALID_PARAMETER;
> - } else if (!Media->MediaPresent) {
> - Status = EFI_NO_MEDIA;
> - } else if (Media->MediaId != MediaId) {
> - Status = EFI_MEDIA_CHANGED;
> - } else if ((Media->IoAlign > 2) && (((UINTN)Buffer & (Media->IoAlign - 1)) != 0)) {
> - Status = EFI_INVALID_PARAMETER;
> - } else {
> - Status = NorFlashReadBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
> - }
> -
> - return Status;
> -}
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoWriteBlocks (
> - IN EFI_BLOCK_IO_PROTOCOL *This,
> - IN UINT32 MediaId,
> - IN EFI_LBA Lba,
> - IN UINTN BufferSizeInBytes,
> - IN VOID *Buffer
> - )
> -{
> - NOR_FLASH_INSTANCE *Instance;
> - EFI_STATUS Status;
> -
> - Instance = INSTANCE_FROM_BLKIO_THIS (This);
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes, BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, Buffer));
> -
> - if ( !This->Media->MediaPresent ) {
> - Status = EFI_NO_MEDIA;
> - } else if ( This->Media->MediaId != MediaId ) {
> - Status = EFI_MEDIA_CHANGED;
> - } else if ( This->Media->ReadOnly ) {
> - Status = EFI_WRITE_PROTECTED;
> - } else {
> - Status = NorFlashWriteBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
> - }
> -
> - return Status;
> -}
> -
> -//
> -// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
> -//
> -EFI_STATUS
> -EFIAPI
> -NorFlashBlockIoFlushBlocks (
> - IN EFI_BLOCK_IO_PROTOCOL *This
> - )
> -{
> - // No Flush required for the NOR Flash driver
> - // because cache operations are not permitted.
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoFlushBlocks: Function NOT IMPLEMENTED (not required).\n"));
> -
> - // Nothing to do so just return without error
> - return EFI_SUCCESS;
> -}
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
> deleted file mode 100644
> index f7b92de21a57..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
> +++ /dev/null
> @@ -1,506 +0,0 @@
> -/** @file NorFlashDxe.c
> -
> - Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#include <Library/UefiLib.h>
> -#include <Library/BaseMemoryLib.h>
> -#include <Library/MemoryAllocationLib.h>
> -#include <Library/UefiBootServicesTableLib.h>
> -#include <Library/PcdLib.h>
> -#include <Library/HobLib.h>
> -#include <Library/DxeServicesTableLib.h>
> -
> -#include "NorFlash.h"
> -
> -STATIC EFI_EVENT mNorFlashVirtualAddrChangeEvent;
> -
> -//
> -// Global variable declarations
> -//
> -NOR_FLASH_INSTANCE **mNorFlashInstances;
> -UINT32 mNorFlashDeviceCount;
> -UINTN mFlashNvStorageVariableBase;
> -EFI_EVENT mFvbVirtualAddrChangeEvent;
> -
> -NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
> - NOR_FLASH_SIGNATURE, // Signature
> - NULL, // Handle ... NEED TO BE FILLED
> -
> - 0, // DeviceBaseAddress ... NEED TO BE FILLED
> - 0, // RegionBaseAddress ... NEED TO BE FILLED
> - 0, // Size ... NEED TO BE FILLED
> - 0, // StartLba
> -
> - {
> - EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
> - NULL, // Media ... NEED TO BE FILLED
> - NorFlashBlockIoReset, // Reset;
> - NorFlashBlockIoReadBlocks, // ReadBlocks
> - NorFlashBlockIoWriteBlocks, // WriteBlocks
> - NorFlashBlockIoFlushBlocks // FlushBlocks
> - }, // BlockIoProtocol
> -
> - {
> - 0, // MediaId ... NEED TO BE FILLED
> - FALSE, // RemovableMedia
> - TRUE, // MediaPresent
> - FALSE, // LogicalPartition
> - FALSE, // ReadOnly
> - FALSE, // WriteCaching;
> - 0, // BlockSize ... NEED TO BE FILLED
> - 4, // IoAlign
> - 0, // LastBlock ... NEED TO BE FILLED
> - 0, // LowestAlignedLba
> - 1, // LogicalBlocksPerPhysicalBlock
> - }, // Media;
> -
> - {
> - EFI_DISK_IO_PROTOCOL_REVISION, // Revision
> - NorFlashDiskIoReadDisk, // ReadDisk
> - NorFlashDiskIoWriteDisk // WriteDisk
> - },
> -
> - {
> - FvbGetAttributes, // GetAttributes
> - FvbSetAttributes, // SetAttributes
> - FvbGetPhysicalAddress, // GetPhysicalAddress
> - FvbGetBlockSize, // GetBlockSize
> - FvbRead, // Read
> - FvbWrite, // Write
> - FvbEraseBlocks, // EraseBlocks
> - NULL, // ParentHandle
> - }, // FvbProtoccol;
> - NULL, // ShadowBuffer
> - {
> - {
> - {
> - HARDWARE_DEVICE_PATH,
> - HW_VENDOR_DP,
> - {
> - (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
> - (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
> - }
> - },
> - { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
> - }, // GUID ... NEED TO BE FILLED
> - },
> - 0, // Index
> - {
> - END_DEVICE_PATH_TYPE,
> - END_ENTIRE_DEVICE_PATH_SUBTYPE,
> - { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
> - }
> - } // DevicePath
> -};
> -
> -EFI_STATUS
> -NorFlashCreateInstance (
> - IN UINTN NorFlashDeviceBase,
> - IN UINTN NorFlashRegionBase,
> - IN UINTN NorFlashSize,
> - IN UINT32 Index,
> - IN UINT32 BlockSize,
> - IN BOOLEAN SupportFvb,
> - OUT NOR_FLASH_INSTANCE **NorFlashInstance
> - )
> -{
> - EFI_STATUS Status;
> - NOR_FLASH_INSTANCE *Instance;
> -
> - ASSERT (NorFlashInstance != NULL);
> -
> - Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
> - if (Instance == NULL) {
> - return EFI_OUT_OF_RESOURCES;
> - }
> -
> - Instance->DeviceBaseAddress = NorFlashDeviceBase;
> - Instance->RegionBaseAddress = NorFlashRegionBase;
> - Instance->Size = NorFlashSize;
> -
> - Instance->BlockIoProtocol.Media = &Instance->Media;
> - Instance->Media.MediaId = Index;
> - Instance->Media.BlockSize = BlockSize;
> - Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
> -
> - CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
> - Instance->DevicePath.Index = (UINT8)Index;
> -
> - Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
> - if (Instance->ShadowBuffer == NULL) {
> - return EFI_OUT_OF_RESOURCES;
> - }
> -
> - if (SupportFvb) {
> - NorFlashFvbInitialize (Instance);
> -
> - Status = gBS->InstallMultipleProtocolInterfaces (
> - &Instance->Handle,
> - &gEfiDevicePathProtocolGuid,
> - &Instance->DevicePath,
> - &gEfiBlockIoProtocolGuid,
> - &Instance->BlockIoProtocol,
> - &gEfiFirmwareVolumeBlockProtocolGuid,
> - &Instance->FvbProtocol,
> - NULL
> - );
> - if (EFI_ERROR (Status)) {
> - FreePool (Instance);
> - return Status;
> - }
> - } else {
> - Status = gBS->InstallMultipleProtocolInterfaces (
> - &Instance->Handle,
> - &gEfiDevicePathProtocolGuid,
> - &Instance->DevicePath,
> - &gEfiBlockIoProtocolGuid,
> - &Instance->BlockIoProtocol,
> - &gEfiDiskIoProtocolGuid,
> - &Instance->DiskIoProtocol,
> - NULL
> - );
> - if (EFI_ERROR (Status)) {
> - FreePool (Instance);
> - return Status;
> - }
> - }
> -
> - *NorFlashInstance = Instance;
> - return Status;
> -}
> -
> -/**
> - * This function unlock and erase an entire NOR Flash block.
> - **/
> -EFI_STATUS
> -NorFlashUnlockAndEraseSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - )
> -{
> - EFI_STATUS Status;
> - UINTN Index;
> - EFI_TPL OriginalTPL;
> -
> - if (!EfiAtRuntime ()) {
> - // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
> - OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
> - } else {
> - // This initialization is only to prevent the compiler to complain about the
> - // use of uninitialized variables
> - OriginalTPL = TPL_HIGH_LEVEL;
> - }
> -
> - Index = 0;
> - // The block erase might fail a first time (SW bug ?). Retry it ...
> - do {
> - // Unlock the block if we have to
> - Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
> - if (EFI_ERROR (Status)) {
> - break;
> - }
> -
> - Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
> - Index++;
> - } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
> -
> - if (Index == NOR_FLASH_ERASE_RETRY) {
> - DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
> - }
> -
> - if (!EfiAtRuntime ()) {
> - // Interruptions can resume.
> - gBS->RestoreTPL (OriginalTPL);
> - }
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -NorFlashWriteFullBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINT32 *DataBuffer,
> - IN UINT32 BlockSizeInWords
> - )
> -{
> - EFI_STATUS Status;
> - UINTN WordAddress;
> - UINT32 WordIndex;
> - UINTN BufferIndex;
> - UINTN BlockAddress;
> - UINTN BuffersInBlock;
> - UINTN RemainingWords;
> - EFI_TPL OriginalTPL;
> - UINTN Cnt;
> -
> - Status = EFI_SUCCESS;
> -
> - // Get the physical address of the block
> - BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
> -
> - // Start writing from the first address at the start of the block
> - WordAddress = BlockAddress;
> -
> - if (!EfiAtRuntime ()) {
> - // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
> - OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
> - } else {
> - // This initialization is only to prevent the compiler to complain about the
> - // use of uninitialized variables
> - OriginalTPL = TPL_HIGH_LEVEL;
> - }
> -
> - Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
> - goto EXIT;
> - }
> -
> - // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
> -
> - // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
> - if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
> - // First, break the entire block into buffer-sized chunks.
> - BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
> -
> - // Then feed each buffer chunk to the NOR Flash
> - // If a buffer does not contain any data, don't write it.
> - for (BufferIndex = 0;
> - BufferIndex < BuffersInBlock;
> - BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
> - )
> - {
> - // Check the buffer to see if it contains any data (not set all 1s).
> - for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
> - if (~DataBuffer[Cnt] != 0 ) {
> - // Some data found, write the buffer.
> - Status = NorFlashWriteBuffer (
> - Instance,
> - WordAddress,
> - P30_MAX_BUFFER_SIZE_IN_BYTES,
> - DataBuffer
> - );
> - if (EFI_ERROR (Status)) {
> - goto EXIT;
> - }
> -
> - break;
> - }
> - }
> - }
> -
> - // Finally, finish off any remaining words that are less than the maximum size of the buffer
> - RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
> -
> - if (RemainingWords != 0) {
> - Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
> - if (EFI_ERROR (Status)) {
> - goto EXIT;
> - }
> - }
> - } else {
> - // For now, use the single word programming algorithm
> - // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
> - // i.e. which ends in the range 0x......01 - 0x......7F.
> - for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
> - Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
> - if (EFI_ERROR (Status)) {
> - goto EXIT;
> - }
> - }
> - }
> -
> -EXIT:
> - if (!EfiAtRuntime ()) {
> - // Interruptions can resume.
> - gBS->RestoreTPL (OriginalTPL);
> - }
> -
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
> - }
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -EFIAPI
> -NorFlashInitialise (
> - IN EFI_HANDLE ImageHandle,
> - IN EFI_SYSTEM_TABLE *SystemTable
> - )
> -{
> - EFI_STATUS Status;
> - UINT32 Index;
> - NOR_FLASH_DESCRIPTION *NorFlashDevices;
> - BOOLEAN ContainVariableStorage;
> -
> - Status = NorFlashPlatformInitialization ();
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
> - return Status;
> - }
> -
> - Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
> - return Status;
> - }
> -
> - mNorFlashInstances = AllocateRuntimePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
> -
> - for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
> - // Check if this NOR Flash device contain the variable storage region
> -
> - if (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
> - ContainVariableStorage =
> - (NorFlashDevices[Index].RegionBaseAddress <= PcdGet64 (PcdFlashNvStorageVariableBase64)) &&
> - (PcdGet64 (PcdFlashNvStorageVariableBase64) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
> - NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
> - } else {
> - ContainVariableStorage =
> - (NorFlashDevices[Index].RegionBaseAddress <= PcdGet32 (PcdFlashNvStorageVariableBase)) &&
> - (PcdGet32 (PcdFlashNvStorageVariableBase) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
> - NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
> - }
> -
> - Status = NorFlashCreateInstance (
> - NorFlashDevices[Index].DeviceBaseAddress,
> - NorFlashDevices[Index].RegionBaseAddress,
> - NorFlashDevices[Index].Size,
> - Index,
> - NorFlashDevices[Index].BlockSize,
> - ContainVariableStorage,
> - &mNorFlashInstances[Index]
> - );
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
> - }
> - }
> -
> - //
> - // Register for the virtual address change event
> - //
> - Status = gBS->CreateEventEx (
> - EVT_NOTIFY_SIGNAL,
> - TPL_NOTIFY,
> - NorFlashVirtualNotifyEvent,
> - NULL,
> - &gEfiEventVirtualAddressChangeGuid,
> - &mNorFlashVirtualAddrChangeEvent
> - );
> - ASSERT_EFI_ERROR (Status);
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -EFIAPI
> -NorFlashFvbInitialize (
> - IN NOR_FLASH_INSTANCE *Instance
> - )
> -{
> - EFI_STATUS Status;
> - UINT32 FvbNumLba;
> - EFI_BOOT_MODE BootMode;
> - UINTN RuntimeMmioRegionSize;
> -
> - DEBUG ((DEBUG_BLKIO, "NorFlashFvbInitialize\n"));
> - ASSERT ((Instance != NULL));
> -
> - //
> - // Declare the Non-Volatile storage as EFI_MEMORY_RUNTIME
> - //
> -
> - // Note: all the NOR Flash region needs to be reserved into the UEFI Runtime memory;
> - // even if we only use the small block region at the top of the NOR Flash.
> - // The reason is when the NOR Flash memory is set into program mode, the command
> - // is written as the base of the flash region (ie: Instance->DeviceBaseAddress)
> - RuntimeMmioRegionSize = (Instance->RegionBaseAddress - Instance->DeviceBaseAddress) + Instance->Size;
> -
> - Status = gDS->AddMemorySpace (
> - EfiGcdMemoryTypeMemoryMappedIo,
> - Instance->DeviceBaseAddress,
> - RuntimeMmioRegionSize,
> - EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
> - );
> - ASSERT_EFI_ERROR (Status);
> -
> - Status = gDS->SetMemorySpaceAttributes (
> - Instance->DeviceBaseAddress,
> - RuntimeMmioRegionSize,
> - EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
> - );
> - ASSERT_EFI_ERROR (Status);
> -
> - mFlashNvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
> - PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
> -
> - // Set the index of the first LBA for the FVB
> - Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
> -
> - BootMode = GetBootModeHob ();
> - if (BootMode == BOOT_WITH_DEFAULT_SETTINGS) {
> - Status = EFI_INVALID_PARAMETER;
> - } else {
> - // Determine if there is a valid header at the beginning of the NorFlash
> - Status = ValidateFvHeader (Instance);
> - }
> -
> - // Install the Default FVB header if required
> - if (EFI_ERROR (Status)) {
> - // There is no valid header, so time to install one.
> - DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: Installing a correct one for this volume.\n",
> - __FUNCTION__
> - ));
> -
> - // Erase all the NorFlash that is reserved for variable storage
> - FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
> -
> - Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
> - if (EFI_ERROR (Status)) {
> - return Status;
> - }
> -
> - // Install all appropriate headers
> - Status = InitializeFvAndVariableStoreHeaders (Instance);
> - if (EFI_ERROR (Status)) {
> - return Status;
> - }
> - }
> -
> - //
> - // The driver implementing the variable read service can now be dispatched;
> - // the varstore headers are in place.
> - //
> - Status = gBS->InstallProtocolInterface (
> - &gImageHandle,
> - &gEdkiiNvVarStoreFormattedGuid,
> - EFI_NATIVE_INTERFACE,
> - NULL
> - );
> - ASSERT_EFI_ERROR (Status);
> -
> - //
> - // Register for the virtual address change event
> - //
> - Status = gBS->CreateEventEx (
> - EVT_NOTIFY_SIGNAL,
> - TPL_NOTIFY,
> - FvbVirtualNotifyEvent,
> - NULL,
> - &gEfiEventVirtualAddressChangeGuid,
> - &mFvbVirtualAddrChangeEvent
> - );
> - ASSERT_EFI_ERROR (Status);
> -
> - return Status;
> -}
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
> deleted file mode 100644
> index f8d4c2703143..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
> +++ /dev/null
> @@ -1,71 +0,0 @@
> -#/** @file
> -#
> -# Component description file for NorFlashDxe module
> -#
> -# Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
> -#
> -# SPDX-License-Identifier: BSD-2-Clause-Patent
> -#
> -#**/
> -
> -[Defines]
> - INF_VERSION = 0x00010005
> - BASE_NAME = ArmVeNorFlashDxe
> - FILE_GUID = 93E34C7E-B50E-11DF-9223-2443DFD72085
> - MODULE_TYPE = DXE_RUNTIME_DRIVER
> - VERSION_STRING = 1.0
> - ENTRY_POINT = NorFlashInitialise
> -
> -[Sources.common]
> - NorFlash.c
> - NorFlash.h
> - NorFlashDxe.c
> - NorFlashFvb.c
> - NorFlashBlockIoDxe.c
> -
> -[Packages]
> - MdePkg/MdePkg.dec
> - MdeModulePkg/MdeModulePkg.dec
> - ArmPlatformPkg/ArmPlatformPkg.dec
> - EmbeddedPkg/EmbeddedPkg.dec
> -
> -[LibraryClasses]
> - IoLib
> - BaseLib
> - DebugLib
> - HobLib
> - NorFlashPlatformLib
> - UefiLib
> - UefiDriverEntryPoint
> - UefiBootServicesTableLib
> - UefiRuntimeLib
> - DxeServicesTableLib
> -
> -[Guids]
> - gEfiSystemNvDataFvGuid
> - gEfiVariableGuid
> - gEfiAuthenticatedVariableGuid
> - gEfiEventVirtualAddressChangeGuid
> - gEdkiiNvVarStoreFormattedGuid ## PRODUCES ## PROTOCOL
> -
> -[Protocols]
> - gEfiBlockIoProtocolGuid
> - gEfiDevicePathProtocolGuid
> - gEfiFirmwareVolumeBlockProtocolGuid
> - gEfiDiskIoProtocolGuid
> -
> -[Pcd.common]
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
> -
> - gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
> -
> -[Depex]
> - gEfiCpuArchProtocolGuid
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c
> deleted file mode 100644
> index 0767581308d2..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c
> +++ /dev/null
> @@ -1,777 +0,0 @@
> -/*++ @file NorFlashFvbDxe.c
> -
> - Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> - --*/
> -
> -#include <PiDxe.h>
> -
> -#include <Library/PcdLib.h>
> -#include <Library/BaseLib.h>
> -#include <Library/UefiLib.h>
> -#include <Library/BaseMemoryLib.h>
> -#include <Library/MemoryAllocationLib.h>
> -
> -#include <Guid/VariableFormat.h>
> -#include <Guid/SystemNvDataGuid.h>
> -#include <Guid/NvVarStoreFormatted.h>
> -
> -#include "NorFlash.h"
> -
> -extern UINTN mFlashNvStorageVariableBase;
> -///
> -/// The Firmware Volume Block Protocol is the low-level interface
> -/// to a firmware volume. File-level access to a firmware volume
> -/// should not be done using the Firmware Volume Block Protocol.
> -/// Normal access to a firmware volume must use the Firmware
> -/// Volume Protocol. Typically, only the file system driver that
> -/// produces the Firmware Volume Protocol will bind to the
> -/// Firmware Volume Block Protocol.
> -///
> -
> -/**
> - Initialises the FV Header and Variable Store Header
> - to support variable operations.
> -
> - @param[in] Ptr - Location to initialise the headers
> -
> -**/
> -EFI_STATUS
> -InitializeFvAndVariableStoreHeaders (
> - IN NOR_FLASH_INSTANCE *Instance
> - )
> -{
> - EFI_STATUS Status;
> - VOID *Headers;
> - UINTN HeadersLength;
> - EFI_FIRMWARE_VOLUME_HEADER *FirmwareVolumeHeader;
> - VARIABLE_STORE_HEADER *VariableStoreHeader;
> - UINT32 NvStorageFtwSpareSize;
> - UINT32 NvStorageFtwWorkingSize;
> - UINT32 NvStorageVariableSize;
> - UINT64 NvStorageFtwSpareBase;
> - UINT64 NvStorageFtwWorkingBase;
> - UINT64 NvStorageVariableBase;
> -
> - HeadersLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY) + sizeof (VARIABLE_STORE_HEADER);
> - Headers = AllocateZeroPool (HeadersLength);
> -
> - NvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
> - NvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> - NvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
> -
> - NvStorageFtwSpareBase = (PcdGet64 (PcdFlashNvStorageFtwSpareBase64) != 0) ?
> - PcdGet64 (PcdFlashNvStorageFtwSpareBase64) : PcdGet32 (PcdFlashNvStorageFtwSpareBase);
> - NvStorageFtwWorkingBase = (PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) != 0) ?
> - PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) : PcdGet32 (PcdFlashNvStorageFtwWorkingBase);
> - NvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
> - PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
> -
> - // FirmwareVolumeHeader->FvLength is declared to have the Variable area AND the FTW working area AND the FTW Spare contiguous.
> - if ((NvStorageVariableBase + NvStorageVariableSize) != NvStorageFtwWorkingBase) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: NvStorageFtwWorkingBase is not contiguous with NvStorageVariableBase region\n",
> - __FUNCTION__
> - ));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - if ((NvStorageFtwWorkingBase + NvStorageFtwWorkingSize) != NvStorageFtwSpareBase) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: NvStorageFtwSpareBase is not contiguous with NvStorageFtwWorkingBase region\n",
> - __FUNCTION__
> - ));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - // Check if the size of the area is at least one block size
> - if ((NvStorageVariableSize <= 0) || (NvStorageVariableSize / Instance->Media.BlockSize <= 0)) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: NvStorageVariableSize is 0x%x, should be atleast one block size\n",
> - __FUNCTION__,
> - NvStorageVariableSize
> - ));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - if ((NvStorageFtwWorkingSize <= 0) || (NvStorageFtwWorkingSize / Instance->Media.BlockSize <= 0)) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: NvStorageFtwWorkingSize is 0x%x, should be atleast one block size\n",
> - __FUNCTION__,
> - NvStorageFtwWorkingSize
> - ));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - if ((NvStorageFtwSpareSize <= 0) || (NvStorageFtwSpareSize / Instance->Media.BlockSize <= 0)) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: NvStorageFtwSpareSize is 0x%x, should be atleast one block size\n",
> - __FUNCTION__,
> - NvStorageFtwSpareSize
> - ));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - // Ensure the Variable area Base Addresses are aligned on a block size boundaries
> - if ((NvStorageVariableBase % Instance->Media.BlockSize != 0) ||
> - (NvStorageFtwWorkingBase % Instance->Media.BlockSize != 0) ||
> - (NvStorageFtwSpareBase % Instance->Media.BlockSize != 0))
> - {
> - DEBUG ((DEBUG_ERROR, "%a: NvStorage Base addresses must be aligned to block size boundaries", __FUNCTION__));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - //
> - // EFI_FIRMWARE_VOLUME_HEADER
> - //
> - FirmwareVolumeHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Headers;
> - CopyGuid (&FirmwareVolumeHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid);
> - FirmwareVolumeHeader->FvLength =
> - PcdGet32 (PcdFlashNvStorageVariableSize) +
> - PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
> - PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> - FirmwareVolumeHeader->Signature = EFI_FVH_SIGNATURE;
> - FirmwareVolumeHeader->Attributes = (EFI_FVB_ATTRIBUTES_2)(
> - EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
> - EFI_FVB2_READ_STATUS | // Reads are currently enabled
> - EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
> - EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
> - EFI_FVB2_ERASE_POLARITY | // After erasure all bits take this value (i.e. '1')
> - EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
> - EFI_FVB2_WRITE_ENABLED_CAP // Writes may be enabled
> - );
> - FirmwareVolumeHeader->HeaderLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY);
> - FirmwareVolumeHeader->Revision = EFI_FVH_REVISION;
> - FirmwareVolumeHeader->BlockMap[0].NumBlocks = Instance->Media.LastBlock + 1;
> - FirmwareVolumeHeader->BlockMap[0].Length = Instance->Media.BlockSize;
> - FirmwareVolumeHeader->BlockMap[1].NumBlocks = 0;
> - FirmwareVolumeHeader->BlockMap[1].Length = 0;
> - FirmwareVolumeHeader->Checksum = CalculateCheckSum16 ((UINT16 *)FirmwareVolumeHeader, FirmwareVolumeHeader->HeaderLength);
> -
> - //
> - // VARIABLE_STORE_HEADER
> - //
> - VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)Headers + FirmwareVolumeHeader->HeaderLength);
> - CopyGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid);
> - VariableStoreHeader->Size = PcdGet32 (PcdFlashNvStorageVariableSize) - FirmwareVolumeHeader->HeaderLength;
> - VariableStoreHeader->Format = VARIABLE_STORE_FORMATTED;
> - VariableStoreHeader->State = VARIABLE_STORE_HEALTHY;
> -
> - // Install the combined super-header in the NorFlash
> - Status = FvbWrite (&Instance->FvbProtocol, 0, 0, &HeadersLength, Headers);
> -
> - FreePool (Headers);
> - return Status;
> -}
> -
> -/**
> - Check the integrity of firmware volume header.
> -
> - @param[in] FwVolHeader - A pointer to a firmware volume header
> -
> - @retval EFI_SUCCESS - The firmware volume is consistent
> - @retval EFI_NOT_FOUND - The firmware volume has been corrupted.
> -
> -**/
> -EFI_STATUS
> -ValidateFvHeader (
> - IN NOR_FLASH_INSTANCE *Instance
> - )
> -{
> - UINT16 Checksum;
> - EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;
> - VARIABLE_STORE_HEADER *VariableStoreHeader;
> - UINTN VariableStoreLength;
> - UINTN FvLength;
> -
> - FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Instance->RegionBaseAddress;
> -
> - FvLength = PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
> - PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> -
> - //
> - // Verify the header revision, header signature, length
> - // Length of FvBlock cannot be 2**64-1
> - // HeaderLength cannot be an odd number
> - //
> - if ( (FwVolHeader->Revision != EFI_FVH_REVISION)
> - || (FwVolHeader->Signature != EFI_FVH_SIGNATURE)
> - || (FwVolHeader->FvLength != FvLength)
> - )
> - {
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: No Firmware Volume header present\n",
> - __FUNCTION__
> - ));
> - return EFI_NOT_FOUND;
> - }
> -
> - // Check the Firmware Volume Guid
> - if ( CompareGuid (&FwVolHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid) == FALSE ) {
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: Firmware Volume Guid non-compatible\n",
> - __FUNCTION__
> - ));
> - return EFI_NOT_FOUND;
> - }
> -
> - // Verify the header checksum
> - Checksum = CalculateSum16 ((UINT16 *)FwVolHeader, FwVolHeader->HeaderLength);
> - if (Checksum != 0) {
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: FV checksum is invalid (Checksum:0x%X)\n",
> - __FUNCTION__,
> - Checksum
> - ));
> - return EFI_NOT_FOUND;
> - }
> -
> - VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)FwVolHeader + FwVolHeader->HeaderLength);
> -
> - // Check the Variable Store Guid
> - if (!CompareGuid (&VariableStoreHeader->Signature, &gEfiVariableGuid) &&
> - !CompareGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid))
> - {
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: Variable Store Guid non-compatible\n",
> - __FUNCTION__
> - ));
> - return EFI_NOT_FOUND;
> - }
> -
> - VariableStoreLength = PcdGet32 (PcdFlashNvStorageVariableSize) - FwVolHeader->HeaderLength;
> - if (VariableStoreHeader->Size != VariableStoreLength) {
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: Variable Store Length does not match\n",
> - __FUNCTION__
> - ));
> - return EFI_NOT_FOUND;
> - }
> -
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - The GetAttributes() function retrieves the attributes and
> - current settings of the block.
> -
> - @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
> -
> - @param Attributes Pointer to EFI_FVB_ATTRIBUTES_2 in which the attributes and
> - current settings are returned.
> - Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
> -
> - @retval EFI_SUCCESS The firmware volume attributes were returned.
> -
> - **/
> -EFI_STATUS
> -EFIAPI
> -FvbGetAttributes (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - OUT EFI_FVB_ATTRIBUTES_2 *Attributes
> - )
> -{
> - EFI_FVB_ATTRIBUTES_2 FlashFvbAttributes;
> - NOR_FLASH_INSTANCE *Instance;
> -
> - Instance = INSTANCE_FROM_FVB_THIS (This);
> -
> - FlashFvbAttributes = (EFI_FVB_ATTRIBUTES_2)(
> -
> - EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
> - EFI_FVB2_READ_STATUS | // Reads are currently enabled
> - EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
> - EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
> - EFI_FVB2_ERASE_POLARITY // After erasure all bits take this value (i.e. '1')
> -
> - );
> -
> - // Check if it is write protected
> - if (Instance->Media.ReadOnly != TRUE) {
> - FlashFvbAttributes = FlashFvbAttributes |
> - EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
> - EFI_FVB2_WRITE_ENABLED_CAP; // Writes may be enabled
> - }
> -
> - *Attributes = FlashFvbAttributes;
> -
> - DEBUG ((DEBUG_BLKIO, "FvbGetAttributes(0x%X)\n", *Attributes));
> -
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - The SetAttributes() function sets configurable firmware volume attributes
> - and returns the new settings of the firmware volume.
> -
> -
> - @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
> -
> - @param Attributes On input, Attributes is a pointer to EFI_FVB_ATTRIBUTES_2
> - that contains the desired firmware volume settings.
> - On successful return, it contains the new settings of
> - the firmware volume.
> - Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
> -
> - @retval EFI_SUCCESS The firmware volume attributes were returned.
> -
> - @retval EFI_INVALID_PARAMETER The attributes requested are in conflict with the capabilities
> - as declared in the firmware volume header.
> -
> - **/
> -EFI_STATUS
> -EFIAPI
> -FvbSetAttributes (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
> - )
> -{
> - DEBUG ((DEBUG_BLKIO, "FvbSetAttributes(0x%X) is not supported\n", *Attributes));
> - return EFI_UNSUPPORTED;
> -}
> -
> -/**
> - The GetPhysicalAddress() function retrieves the base address of
> - a memory-mapped firmware volume. This function should be called
> - only for memory-mapped firmware volumes.
> -
> - @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
> -
> - @param Address Pointer to a caller-allocated
> - EFI_PHYSICAL_ADDRESS that, on successful
> - return from GetPhysicalAddress(), contains the
> - base address of the firmware volume.
> -
> - @retval EFI_SUCCESS The firmware volume base address was returned.
> -
> - @retval EFI_NOT_SUPPORTED The firmware volume is not memory mapped.
> -
> - **/
> -EFI_STATUS
> -EFIAPI
> -FvbGetPhysicalAddress (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - OUT EFI_PHYSICAL_ADDRESS *Address
> - )
> -{
> - NOR_FLASH_INSTANCE *Instance;
> -
> - Instance = INSTANCE_FROM_FVB_THIS (This);
> -
> - DEBUG ((DEBUG_BLKIO, "FvbGetPhysicalAddress(BaseAddress=0x%08x)\n", Instance->RegionBaseAddress));
> -
> - ASSERT (Address != NULL);
> -
> - *Address = mFlashNvStorageVariableBase;
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - The GetBlockSize() function retrieves the size of the requested
> - block. It also returns the number of additional blocks with
> - the identical size. The GetBlockSize() function is used to
> - retrieve the block map (see EFI_FIRMWARE_VOLUME_HEADER).
> -
> -
> - @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
> -
> - @param Lba Indicates the block for which to return the size.
> -
> - @param BlockSize Pointer to a caller-allocated UINTN in which
> - the size of the block is returned.
> -
> - @param NumberOfBlocks Pointer to a caller-allocated UINTN in
> - which the number of consecutive blocks,
> - starting with Lba, is returned. All
> - blocks in this range have a size of
> - BlockSize.
> -
> -
> - @retval EFI_SUCCESS The firmware volume base address was returned.
> -
> - @retval EFI_INVALID_PARAMETER The requested LBA is out of range.
> -
> - **/
> -EFI_STATUS
> -EFIAPI
> -FvbGetBlockSize (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN EFI_LBA Lba,
> - OUT UINTN *BlockSize,
> - OUT UINTN *NumberOfBlocks
> - )
> -{
> - EFI_STATUS Status;
> - NOR_FLASH_INSTANCE *Instance;
> -
> - Instance = INSTANCE_FROM_FVB_THIS (This);
> -
> - DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize(Lba=%ld, BlockSize=0x%x, LastBlock=%ld)\n", Lba, Instance->Media.BlockSize, Instance->Media.LastBlock));
> -
> - if (Lba > Instance->Media.LastBlock) {
> - DEBUG ((DEBUG_ERROR, "FvbGetBlockSize: ERROR - Parameter LBA %ld is beyond the last Lba (%ld).\n", Lba, Instance->Media.LastBlock));
> - Status = EFI_INVALID_PARAMETER;
> - } else {
> - // This is easy because in this platform each NorFlash device has equal sized blocks.
> - *BlockSize = (UINTN)Instance->Media.BlockSize;
> - *NumberOfBlocks = (UINTN)(Instance->Media.LastBlock - Lba + 1);
> -
> - DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize: *BlockSize=0x%x, *NumberOfBlocks=0x%x.\n", *BlockSize, *NumberOfBlocks));
> -
> - Status = EFI_SUCCESS;
> - }
> -
> - return Status;
> -}
> -
> -/**
> - Reads the specified number of bytes into a buffer from the specified block.
> -
> - The Read() function reads the requested number of bytes from the
> - requested block and stores them in the provided buffer.
> - Implementations should be mindful that the firmware volume
> - might be in the ReadDisabled state. If it is in this state,
> - the Read() function must return the status code
> - EFI_ACCESS_DENIED without modifying the contents of the
> - buffer. The Read() function must also prevent spanning block
> - boundaries. If a read is requested that would span a block
> - boundary, the read must read up to the boundary but not
> - beyond. The output parameter NumBytes must be set to correctly
> - indicate the number of bytes actually read. The caller must be
> - aware that a read may be partially completed.
> -
> - @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
> -
> - @param Lba The starting logical block index from which to read.
> -
> - @param Offset Offset into the block at which to begin reading.
> -
> - @param NumBytes Pointer to a UINTN.
> - At entry, *NumBytes contains the total size of the buffer.
> - At exit, *NumBytes contains the total number of bytes read.
> -
> - @param Buffer Pointer to a caller-allocated buffer that will be used
> - to hold the data that is read.
> -
> - @retval EFI_SUCCESS The firmware volume was read successfully, and contents are
> - in Buffer.
> -
> - @retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary.
> - On output, NumBytes contains the total number of bytes
> - returned in Buffer.
> -
> - @retval EFI_ACCESS_DENIED The firmware volume is in the ReadDisabled state.
> -
> - @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be read.
> -
> - **/
> -EFI_STATUS
> -EFIAPI
> -FvbRead (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN OUT UINTN *NumBytes,
> - IN OUT UINT8 *Buffer
> - )
> -{
> - EFI_STATUS TempStatus;
> - UINTN BlockSize;
> - NOR_FLASH_INSTANCE *Instance;
> -
> - Instance = INSTANCE_FROM_FVB_THIS (This);
> -
> - DEBUG ((DEBUG_BLKIO, "FvbRead(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Instance->StartLba + Lba, Offset, *NumBytes, Buffer));
> -
> - TempStatus = EFI_SUCCESS;
> -
> - // Cache the block size to avoid de-referencing pointers all the time
> - BlockSize = Instance->Media.BlockSize;
> -
> - DEBUG ((DEBUG_BLKIO, "FvbRead: Check if (Offset=0x%x + NumBytes=0x%x) <= BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
> -
> - // The read must not span block boundaries.
> - // We need to check each variable individually because adding two large values together overflows.
> - if ((Offset >= BlockSize) ||
> - (*NumBytes > BlockSize) ||
> - ((Offset + *NumBytes) > BlockSize))
> - {
> - DEBUG ((DEBUG_ERROR, "FvbRead: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // We must have some bytes to read
> - if (*NumBytes == 0) {
> - return EFI_BAD_BUFFER_SIZE;
> - }
> -
> - // Decide if we are doing full block reads or not.
> - if (*NumBytes % BlockSize != 0) {
> - TempStatus = NorFlashRead (Instance, Instance->StartLba + Lba, Offset, *NumBytes, Buffer);
> - if (EFI_ERROR (TempStatus)) {
> - return EFI_DEVICE_ERROR;
> - }
> - } else {
> - // Read NOR Flash data into shadow buffer
> - TempStatus = NorFlashReadBlocks (Instance, Instance->StartLba + Lba, BlockSize, Buffer);
> - if (EFI_ERROR (TempStatus)) {
> - // Return one of the pre-approved error statuses
> - return EFI_DEVICE_ERROR;
> - }
> - }
> -
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - Writes the specified number of bytes from the input buffer to the block.
> -
> - The Write() function writes the specified number of bytes from
> - the provided buffer to the specified block and offset. If the
> - firmware volume is sticky write, the caller must ensure that
> - all the bits of the specified range to write are in the
> - EFI_FVB_ERASE_POLARITY state before calling the Write()
> - function, or else the result will be unpredictable. This
> - unpredictability arises because, for a sticky-write firmware
> - volume, a write may negate a bit in the EFI_FVB_ERASE_POLARITY
> - state but cannot flip it back again. Before calling the
> - Write() function, it is recommended for the caller to first call
> - the EraseBlocks() function to erase the specified block to
> - write. A block erase cycle will transition bits from the
> - (NOT)EFI_FVB_ERASE_POLARITY state back to the
> - EFI_FVB_ERASE_POLARITY state. Implementations should be
> - mindful that the firmware volume might be in the WriteDisabled
> - state. If it is in this state, the Write() function must
> - return the status code EFI_ACCESS_DENIED without modifying the
> - contents of the firmware volume. The Write() function must
> - also prevent spanning block boundaries. If a write is
> - requested that spans a block boundary, the write must store up
> - to the boundary but not beyond. The output parameter NumBytes
> - must be set to correctly indicate the number of bytes actually
> - written. The caller must be aware that a write may be
> - partially completed. All writes, partial or otherwise, must be
> - fully flushed to the hardware before the Write() service
> - returns.
> -
> - @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
> -
> - @param Lba The starting logical block index to write to.
> -
> - @param Offset Offset into the block at which to begin writing.
> -
> - @param NumBytes The pointer to a UINTN.
> - At entry, *NumBytes contains the total size of the buffer.
> - At exit, *NumBytes contains the total number of bytes actually written.
> -
> - @param Buffer The pointer to a caller-allocated buffer that contains the source for the write.
> -
> - @retval EFI_SUCCESS The firmware volume was written successfully.
> -
> - @retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
> - On output, NumBytes contains the total number of bytes
> - actually written.
> -
> - @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
> -
> - @retval EFI_DEVICE_ERROR The block device is malfunctioning and could not be written.
> -
> -
> - **/
> -EFI_STATUS
> -EFIAPI
> -FvbWrite (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - IN EFI_LBA Lba,
> - IN UINTN Offset,
> - IN OUT UINTN *NumBytes,
> - IN UINT8 *Buffer
> - )
> -{
> - NOR_FLASH_INSTANCE *Instance;
> -
> - Instance = INSTANCE_FROM_FVB_THIS (This);
> -
> - return NorFlashWriteSingleBlock (Instance, Instance->StartLba + Lba, Offset, NumBytes, Buffer);
> -}
> -
> -/**
> - Erases and initialises a firmware volume block.
> -
> - The EraseBlocks() function erases one or more blocks as denoted
> - by the variable argument list. The entire parameter list of
> - blocks must be verified before erasing any blocks. If a block is
> - requested that does not exist within the associated firmware
> - volume (it has a larger index than the last block of the
> - firmware volume), the EraseBlocks() function must return the
> - status code EFI_INVALID_PARAMETER without modifying the contents
> - of the firmware volume. Implementations should be mindful that
> - the firmware volume might be in the WriteDisabled state. If it
> - is in this state, the EraseBlocks() function must return the
> - status code EFI_ACCESS_DENIED without modifying the contents of
> - the firmware volume. All calls to EraseBlocks() must be fully
> - flushed to the hardware before the EraseBlocks() service
> - returns.
> -
> - @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL
> - instance.
> -
> - @param ... The variable argument list is a list of tuples.
> - Each tuple describes a range of LBAs to erase
> - and consists of the following:
> - - An EFI_LBA that indicates the starting LBA
> - - A UINTN that indicates the number of blocks to erase.
> -
> - The list is terminated with an EFI_LBA_LIST_TERMINATOR.
> - For example, the following indicates that two ranges of blocks
> - (5-7 and 10-11) are to be erased:
> - EraseBlocks (This, 5, 3, 10, 2, EFI_LBA_LIST_TERMINATOR);
> -
> - @retval EFI_SUCCESS The erase request successfully completed.
> -
> - @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
> -
> - @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be written.
> - The firmware device may have been partially erased.
> -
> - @retval EFI_INVALID_PARAMETER One or more of the LBAs listed in the variable argument list do
> - not exist in the firmware volume.
> -
> - **/
> -EFI_STATUS
> -EFIAPI
> -FvbEraseBlocks (
> - IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
> - ...
> - )
> -{
> - EFI_STATUS Status;
> - VA_LIST Args;
> - UINTN BlockAddress; // Physical address of Lba to erase
> - EFI_LBA StartingLba; // Lba from which we start erasing
> - UINTN NumOfLba; // Number of Lba blocks to erase
> - NOR_FLASH_INSTANCE *Instance;
> -
> - Instance = INSTANCE_FROM_FVB_THIS (This);
> -
> - DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks()\n"));
> -
> - Status = EFI_SUCCESS;
> -
> - // Detect WriteDisabled state
> - if (Instance->Media.ReadOnly == TRUE) {
> - // Firmware volume is in WriteDisabled state
> - DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Device is in WriteDisabled state.\n"));
> - return EFI_ACCESS_DENIED;
> - }
> -
> - // Before erasing, check the entire list of parameters to ensure all specified blocks are valid
> -
> - VA_START (Args, This);
> - do {
> - // Get the Lba from which we start erasing
> - StartingLba = VA_ARG (Args, EFI_LBA);
> -
> - // Have we reached the end of the list?
> - if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
> - // Exit the while loop
> - break;
> - }
> -
> - // How many Lba blocks are we requested to erase?
> - NumOfLba = VA_ARG (Args, UINTN);
> -
> - // All blocks must be within range
> - DEBUG ((
> - DEBUG_BLKIO,
> - "FvbEraseBlocks: Check if: ( StartingLba=%ld + NumOfLba=%Lu - 1 ) > LastBlock=%ld.\n",
> - Instance->StartLba + StartingLba,
> - (UINT64)NumOfLba,
> - Instance->Media.LastBlock
> - ));
> - if ((NumOfLba == 0) || ((Instance->StartLba + StartingLba + NumOfLba - 1) > Instance->Media.LastBlock)) {
> - VA_END (Args);
> - DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Lba range goes past the last Lba.\n"));
> - Status = EFI_INVALID_PARAMETER;
> - goto EXIT;
> - }
> - } while (TRUE);
> -
> - VA_END (Args);
> -
> - //
> - // To get here, all must be ok, so start erasing
> - //
> - VA_START (Args, This);
> - do {
> - // Get the Lba from which we start erasing
> - StartingLba = VA_ARG (Args, EFI_LBA);
> -
> - // Have we reached the end of the list?
> - if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
> - // Exit the while loop
> - break;
> - }
> -
> - // How many Lba blocks are we requested to erase?
> - NumOfLba = VA_ARG (Args, UINTN);
> -
> - // Go through each one and erase it
> - while (NumOfLba > 0) {
> - // Get the physical address of Lba to erase
> - BlockAddress = GET_NOR_BLOCK_ADDRESS (
> - Instance->RegionBaseAddress,
> - Instance->StartLba + StartingLba,
> - Instance->Media.BlockSize
> - );
> -
> - // Erase it
> - DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks: Erasing Lba=%ld @ 0x%08x.\n", Instance->StartLba + StartingLba, BlockAddress));
> - Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
> - if (EFI_ERROR (Status)) {
> - VA_END (Args);
> - Status = EFI_DEVICE_ERROR;
> - goto EXIT;
> - }
> -
> - // Move to the next Lba
> - StartingLba++;
> - NumOfLba--;
> - }
> - } while (TRUE);
> -
> - VA_END (Args);
> -
> -EXIT:
> - return Status;
> -}
> -
> -/**
> - Fixup internal data so that EFI can be call in virtual mode.
> - Call the passed in Child Notify event and convert any pointers in
> - lib to virtual mode.
> -
> - @param[in] Event The Event that is being processed
> - @param[in] Context Event Context
> -**/
> -VOID
> -EFIAPI
> -FvbVirtualNotifyEvent (
> - IN EFI_EVENT Event,
> - IN VOID *Context
> - )
> -{
> - EfiConvertPointer (0x0, (VOID **)&mFlashNvStorageVariableBase);
> - return;
> -}
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c
> deleted file mode 100644
> index b72ad97b0b55..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c
> +++ /dev/null
> @@ -1,383 +0,0 @@
> -/** @file NorFlashStandaloneMm.c
> -
> - Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
> - Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#include <Library/BaseMemoryLib.h>
> -#include <Library/MemoryAllocationLib.h>
> -#include <Library/MmServicesTableLib.h>
> -
> -#include "NorFlash.h"
> -
> -//
> -// Global variable declarations
> -//
> -NOR_FLASH_INSTANCE **mNorFlashInstances;
> -UINT32 mNorFlashDeviceCount;
> -UINTN mFlashNvStorageVariableBase;
> -
> -NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
> - NOR_FLASH_SIGNATURE, // Signature
> - NULL, // Handle ... NEED TO BE FILLED
> -
> - 0, // DeviceBaseAddress ... NEED TO BE FILLED
> - 0, // RegionBaseAddress ... NEED TO BE FILLED
> - 0, // Size ... NEED TO BE FILLED
> - 0, // StartLba
> -
> - {
> - EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
> - NULL, // Media ... NEED TO BE FILLED
> - NULL, // Reset;
> - NULL, // ReadBlocks
> - NULL, // WriteBlocks
> - NULL // FlushBlocks
> - }, // BlockIoProtocol
> -
> - {
> - 0, // MediaId ... NEED TO BE FILLED
> - FALSE, // RemovableMedia
> - TRUE, // MediaPresent
> - FALSE, // LogicalPartition
> - FALSE, // ReadOnly
> - FALSE, // WriteCaching;
> - 0, // BlockSize ... NEED TO BE FILLED
> - 4, // IoAlign
> - 0, // LastBlock ... NEED TO BE FILLED
> - 0, // LowestAlignedLba
> - 1, // LogicalBlocksPerPhysicalBlock
> - }, // Media;
> -
> - {
> - EFI_DISK_IO_PROTOCOL_REVISION, // Revision
> - NULL, // ReadDisk
> - NULL // WriteDisk
> - },
> -
> - {
> - FvbGetAttributes, // GetAttributes
> - FvbSetAttributes, // SetAttributes
> - FvbGetPhysicalAddress, // GetPhysicalAddress
> - FvbGetBlockSize, // GetBlockSize
> - FvbRead, // Read
> - FvbWrite, // Write
> - FvbEraseBlocks, // EraseBlocks
> - NULL, // ParentHandle
> - }, // FvbProtoccol;
> - NULL, // ShadowBuffer
> - {
> - {
> - {
> - HARDWARE_DEVICE_PATH,
> - HW_VENDOR_DP,
> - {
> - (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
> - (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
> - }
> - },
> - { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
> - }, // GUID ... NEED TO BE FILLED
> - },
> - 0, // Index
> - {
> - END_DEVICE_PATH_TYPE,
> - END_ENTIRE_DEVICE_PATH_SUBTYPE,
> - { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
> - }
> - } // DevicePath
> -};
> -
> -EFI_STATUS
> -NorFlashCreateInstance (
> - IN UINTN NorFlashDeviceBase,
> - IN UINTN NorFlashRegionBase,
> - IN UINTN NorFlashSize,
> - IN UINT32 Index,
> - IN UINT32 BlockSize,
> - IN BOOLEAN SupportFvb,
> - OUT NOR_FLASH_INSTANCE **NorFlashInstance
> - )
> -{
> - EFI_STATUS Status;
> - NOR_FLASH_INSTANCE *Instance;
> -
> - ASSERT (NorFlashInstance != NULL);
> -
> - Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
> - if (Instance == NULL) {
> - return EFI_OUT_OF_RESOURCES;
> - }
> -
> - Instance->DeviceBaseAddress = NorFlashDeviceBase;
> - Instance->RegionBaseAddress = NorFlashRegionBase;
> - Instance->Size = NorFlashSize;
> -
> - Instance->BlockIoProtocol.Media = &Instance->Media;
> - Instance->Media.MediaId = Index;
> - Instance->Media.BlockSize = BlockSize;
> - Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
> -
> - CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
> - Instance->DevicePath.Index = (UINT8)Index;
> -
> - Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
> - if (Instance->ShadowBuffer == NULL) {
> - return EFI_OUT_OF_RESOURCES;
> - }
> -
> - if (SupportFvb) {
> - NorFlashFvbInitialize (Instance);
> -
> - Status = gMmst->MmInstallProtocolInterface (
> - &Instance->Handle,
> - &gEfiSmmFirmwareVolumeBlockProtocolGuid,
> - EFI_NATIVE_INTERFACE,
> - &Instance->FvbProtocol
> - );
> - if (EFI_ERROR (Status)) {
> - FreePool (Instance);
> - return Status;
> - }
> - } else {
> - DEBUG ((DEBUG_ERROR, "standalone MM NOR Flash driver only support FVB.\n"));
> - FreePool (Instance);
> - return EFI_UNSUPPORTED;
> - }
> -
> - *NorFlashInstance = Instance;
> - return Status;
> -}
> -
> -/**
> - * This function unlock and erase an entire NOR Flash block.
> - **/
> -EFI_STATUS
> -NorFlashUnlockAndEraseSingleBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN UINTN BlockAddress
> - )
> -{
> - EFI_STATUS Status;
> - UINTN Index;
> -
> - Index = 0;
> - // The block erase might fail a first time (SW bug ?). Retry it ...
> - do {
> - // Unlock the block if we have to
> - Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
> - if (EFI_ERROR (Status)) {
> - break;
> - }
> -
> - Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
> - Index++;
> - } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
> -
> - if (Index == NOR_FLASH_ERASE_RETRY) {
> - DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
> - }
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -NorFlashWriteFullBlock (
> - IN NOR_FLASH_INSTANCE *Instance,
> - IN EFI_LBA Lba,
> - IN UINT32 *DataBuffer,
> - IN UINT32 BlockSizeInWords
> - )
> -{
> - EFI_STATUS Status;
> - UINTN WordAddress;
> - UINT32 WordIndex;
> - UINTN BufferIndex;
> - UINTN BlockAddress;
> - UINTN BuffersInBlock;
> - UINTN RemainingWords;
> - UINTN Cnt;
> -
> - Status = EFI_SUCCESS;
> -
> - // Get the physical address of the block
> - BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
> -
> - // Start writing from the first address at the start of the block
> - WordAddress = BlockAddress;
> -
> - Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
> - goto EXIT;
> - }
> -
> - // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
> -
> - // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
> - if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
> - // First, break the entire block into buffer-sized chunks.
> - BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
> -
> - // Then feed each buffer chunk to the NOR Flash
> - // If a buffer does not contain any data, don't write it.
> - for (BufferIndex = 0;
> - BufferIndex < BuffersInBlock;
> - BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
> - )
> - {
> - // Check the buffer to see if it contains any data (not set all 1s).
> - for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
> - if (~DataBuffer[Cnt] != 0 ) {
> - // Some data found, write the buffer.
> - Status = NorFlashWriteBuffer (
> - Instance,
> - WordAddress,
> - P30_MAX_BUFFER_SIZE_IN_BYTES,
> - DataBuffer
> - );
> - if (EFI_ERROR (Status)) {
> - goto EXIT;
> - }
> -
> - break;
> - }
> - }
> - }
> -
> - // Finally, finish off any remaining words that are less than the maximum size of the buffer
> - RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
> -
> - if (RemainingWords != 0) {
> - Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
> - if (EFI_ERROR (Status)) {
> - goto EXIT;
> - }
> - }
> - } else {
> - // For now, use the single word programming algorithm
> - // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
> - // i.e. which ends in the range 0x......01 - 0x......7F.
> - for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
> - Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
> - if (EFI_ERROR (Status)) {
> - goto EXIT;
> - }
> - }
> - }
> -
> -EXIT:
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
> - }
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -EFIAPI
> -NorFlashInitialise (
> - IN EFI_HANDLE ImageHandle,
> - IN EFI_MM_SYSTEM_TABLE *MmSystemTable
> - )
> -{
> - EFI_STATUS Status;
> - UINT32 Index;
> - NOR_FLASH_DESCRIPTION *NorFlashDevices;
> - BOOLEAN ContainVariableStorage;
> -
> - Status = NorFlashPlatformInitialization ();
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
> - return Status;
> - }
> -
> - Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
> - return Status;
> - }
> -
> - mNorFlashInstances = AllocatePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
> -
> - for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
> - // Check if this NOR Flash device contain the variable storage region
> -
> - if (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
> - ContainVariableStorage =
> - (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet64 (PcdFlashNvStorageVariableBase64)) &&
> - (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
> - NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
> - } else {
> - ContainVariableStorage =
> - (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet32 (PcdFlashNvStorageVariableBase)) &&
> - (FixedPcdGet32 (PcdFlashNvStorageVariableBase) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
> - NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
> - }
> -
> - Status = NorFlashCreateInstance (
> - NorFlashDevices[Index].DeviceBaseAddress,
> - NorFlashDevices[Index].RegionBaseAddress,
> - NorFlashDevices[Index].Size,
> - Index,
> - NorFlashDevices[Index].BlockSize,
> - ContainVariableStorage,
> - &mNorFlashInstances[Index]
> - );
> - if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
> - }
> - }
> -
> - return Status;
> -}
> -
> -EFI_STATUS
> -EFIAPI
> -NorFlashFvbInitialize (
> - IN NOR_FLASH_INSTANCE *Instance
> - )
> -{
> - EFI_STATUS Status;
> - UINT32 FvbNumLba;
> -
> - ASSERT ((Instance != NULL));
> -
> - mFlashNvStorageVariableBase = (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
> - FixedPcdGet64 (PcdFlashNvStorageVariableBase64) : FixedPcdGet32 (PcdFlashNvStorageVariableBase);
> - // Set the index of the first LBA for the FVB
> - Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
> -
> - // Determine if there is a valid header at the beginning of the NorFlash
> - Status = ValidateFvHeader (Instance);
> -
> - // Install the Default FVB header if required
> - if (EFI_ERROR (Status)) {
> - // There is no valid header, so time to install one.
> - DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: Installing a correct one for this volume.\n",
> - __FUNCTION__
> - ));
> -
> - // Erase all the NorFlash that is reserved for variable storage
> - FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
> -
> - Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
> - if (EFI_ERROR (Status)) {
> - return Status;
> - }
> -
> - // Install all appropriate headers
> - Status = InitializeFvAndVariableStoreHeaders (Instance);
> - if (EFI_ERROR (Status)) {
> - return Status;
> - }
> - }
> -
> - return Status;
> -}
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
> deleted file mode 100644
> index b8dddd5cbec3..000000000000
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -#/** @file
> -#
> -# Component description file for NorFlashStandaloneMm module
> -#
> -# Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
> -# Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
> -#
> -# SPDX-License-Identifier: BSD-2-Clause-Patent
> -#
> -#**/
> -
> -[Defines]
> - INF_VERSION = 0x00010005
> - BASE_NAME = ArmVeNorFlashStandaloneMm
> - FILE_GUID = e67d82ad-cd56-4071-9151-95ee44990bb0
> - MODULE_TYPE = MM_STANDALONE
> - VERSION_STRING = 1.0
> - PI_SPECIFICATION_VERSION = 0x00010032
> - ENTRY_POINT = NorFlashInitialise
> -
> -[Sources.common]
> - NorFlash.h
> - NorFlash.c
> - NorFlashStandaloneMm.c
> - NorFlashFvb.c
> -
> -[Packages]
> - MdePkg/MdePkg.dec
> - MdeModulePkg/MdeModulePkg.dec
> - ArmPlatformPkg/ArmPlatformPkg.dec
> - EmbeddedPkg/EmbeddedPkg.dec
> -
> -[LibraryClasses]
> - BaseLib
> - BaseMemoryLib
> - DebugLib
> - IoLib
> - MemoryAllocationLib
> - MmServicesTableLib
> - NorFlashPlatformLib
> - StandaloneMmDriverEntryPoint
> -
> -[Guids]
> - gEfiSystemNvDataFvGuid
> - gEfiVariableGuid
> - gEfiAuthenticatedVariableGuid
> -
> -[Protocols]
> - gEfiSmmFirmwareVolumeBlockProtocolGuid
> -
> -[FixedPcd]
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
> - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
> -
> -[FeaturePcd]
> - gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
> -
> -[Depex]
> - TRUE
> diff --git a/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h b/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h
> deleted file mode 100644
> index 6ef5b70e9948..000000000000
> --- a/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -/** @file
> -
> - Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> - **/
> -
> -#ifndef _NORFLASHPLATFORMLIB_H_
> -#define _NORFLASHPLATFORMLIB_H_
> -
> -typedef struct {
> - UINTN DeviceBaseAddress; // Start address of the Device Base Address (DBA)
> - UINTN RegionBaseAddress; // Start address of one single region
> - UINTN Size;
> - UINTN BlockSize;
> -} NOR_FLASH_DESCRIPTION;
> -
> -EFI_STATUS
> -NorFlashPlatformInitialization (
> - VOID
> - );
> -
> -EFI_STATUS
> -NorFlashPlatformGetDevices (
> - OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
> - OUT UINT32 *Count
> - );
> -
> -#endif /* _NORFLASHPLATFORMLIB_H_ */
> diff --git a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c b/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c
> deleted file mode 100644
> index 6e11b23fdb3d..000000000000
> --- a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -/** @file
> -
> - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
> -
> - SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> - **/
> -
> -#include <Library/NorFlashPlatformLib.h>
> -
> -EFI_STATUS
> -NorFlashPlatformInitialization (
> - VOID
> - )
> -{
> - return EFI_SUCCESS;
> -}
> -
> -EFI_STATUS
> -NorFlashPlatformGetDevices (
> - OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
> - OUT UINT32 *Count
> - )
> -{
> - *NorFlashDescriptions = NULL;
> - *Count = 0;
> - return EFI_SUCCESS;
> -}
> diff --git a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf b/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
> deleted file mode 100644
> index 3a2d5a171564..000000000000
> --- a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -#/** @file
> -#
> -# Component description file for NorFlashPlatformNullLib module
> -#
> -# Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
> -#
> -# SPDX-License-Identifier: BSD-2-Clause-Patent
> -#
> -#**/
> -
> -[Defines]
> - INF_VERSION = 0x00010005
> - BASE_NAME = NorFlashPlatformNullLib
> - FILE_GUID = 29b733ad-d066-4df6-8a89-b9df1beb818a
> - MODULE_TYPE = DXE_DRIVER
> - VERSION_STRING = 1.0
> - LIBRARY_CLASS = NorFlashPlatformLib
> -
> -[Sources.common]
> - NorFlashPlatformNullLib.c
> -
> -[Packages]
> - MdePkg/MdePkg.dec
> - ArmPlatformPkg/ArmPlatformPkg.dec
> --
> 2.35.1
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (10 preceding siblings ...)
2022-10-24 17:01 ` [PATCH 11/11] ArmPlatformPkg: Retire NorFlashDxe driver Ard Biesheuvel
@ 2022-10-27 4:47 ` Sunil V L
2022-10-27 16:56 ` Ard Biesheuvel
2024-12-16 6:48 ` [edk2-devel] " wanglimin
12 siblings, 1 reply; 16+ messages in thread
From: Sunil V L @ 2022-10-27 4:47 UTC (permalink / raw)
To: Ard Biesheuvel; +Cc: devel, Gerd Hoffmann, Sami Mujawar, Leif Lindholm
On Mon, Oct 24, 2022 at 07:01:11PM +0200, Ard Biesheuvel wrote:
> Create a new driver VirtNorFlashDxe that targets QEMU and KvmTool's NOR
> flash emulation specifically, and retire the ArmPlatformPkg one.
>
> This permits new virt implementations to wire up QEMU's NOR flash
> emulation without having to rely on ARM specific packages. It also
> permits us to implement some tweaks to work around some rough
> performance edges of KVM memslot backed NOR flash.
>
Thank you very much!. Looks good to me. May be you want to fix the
include gaurd in NorFlash.h and VirtNorFlashPlatformLib.h as per the
coding standards.
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe
2022-10-27 4:47 ` [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Sunil V L
@ 2022-10-27 16:56 ` Ard Biesheuvel
0 siblings, 0 replies; 16+ messages in thread
From: Ard Biesheuvel @ 2022-10-27 16:56 UTC (permalink / raw)
To: Sunil V L; +Cc: devel, Gerd Hoffmann, Sami Mujawar, Leif Lindholm
On Thu, 27 Oct 2022 at 06:47, Sunil V L <sunilvl@ventanamicro.com> wrote:
>
> On Mon, Oct 24, 2022 at 07:01:11PM +0200, Ard Biesheuvel wrote:
> > Create a new driver VirtNorFlashDxe that targets QEMU and KvmTool's NOR
> > flash emulation specifically, and retire the ArmPlatformPkg one.
> >
> > This permits new virt implementations to wire up QEMU's NOR flash
> > emulation without having to rely on ARM specific packages. It also
> > permits us to implement some tweaks to work around some rough
> > performance edges of KVM memslot backed NOR flash.
> >
>
> Thank you very much!. Looks good to me. May be you want to fix the
> include gaurd in NorFlash.h and VirtNorFlashPlatformLib.h as per the
> coding standards.
>
> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Thanks. I've merged these now.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [edk2-devel] [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe
2022-10-24 17:01 [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Ard Biesheuvel
` (11 preceding siblings ...)
2022-10-27 4:47 ` [PATCH 00/11] ArmVirtPkg: introduce VirtNorFlashDxe Sunil V L
@ 2024-12-16 6:48 ` wanglimin
12 siblings, 0 replies; 16+ messages in thread
From: wanglimin @ 2024-12-16 6:48 UTC (permalink / raw)
To: Ard Biesheuvel, devel
[-- Attachment #1: Type: text/plain, Size: 884 bytes --]
Hello,
I am trying to boot kvm VM on aarch64 preempt-rt kernel host,
it is very very slow (~80s) for the first defined VM to boot until grub interface ,
while it's only takes about ~15s for the normal linux kernel (without FULL preemptable mode) or on x86 platform,
and it looks normally if the VM is not the first boot after defined.
The most time spend in the FvbWrite() with NorFlash operation.
Do you have any test on FULL preempt kernel ?
Best Regards.
Limin Wang
wanglimin@xfusion.com
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#120924): https://edk2.groups.io/g/devel/message/120924
Mute This Topic: https://groups.io/mt/94539642/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: text/html, Size: 2161 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread