From: "Ilias Apalodimas" <ilias.apalodimas@linaro.org>
To: Etienne Carriere <etienne.carriere@linaro.org>
Cc: devel@edk2.groups.io, Ard Biesheuvel <ardb+tianocore@kernel.org>,
Leif Lindholm <leif@nuviainc.com>,
Sami Mujawar <sami.mujawar@arm.com>,
Sughosh Ganu <sughosh.ganu@linaro.org>,
Thomas Abraham <thomas.abraham@arm.com>
Subject: Re: [edk2-platforms][PATCH v2 5/6] Drivers/OpTee: address cast build warning issue in 32b mode
Date: Mon, 17 May 2021 15:46:16 +0300 [thread overview]
Message-ID: <YKJlmDSo3T8uGu1E@enceladus> (raw)
In-Reply-To: <20210517055047.30814-5-etienne.carriere@linaro.org>
On Mon, May 17, 2021 at 07:50:46AM +0200, Etienne Carriere wrote:
> Use (UINTN) cast to cast physical or virtual address values to the
> pointer size before casting from/to a pointer value.
>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> Cc: Leif Lindholm <leif@nuviainc.com>
> Cc: Sami Mujawar <sami.mujawar@arm.com>
> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> ---
> No change since v1
> ---
> Drivers/OpTee/OpteeRpmbPkg/OpTeeRpmbFvb.c | 21 +++++++++++++-------
> 1 file changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/Drivers/OpTee/OpteeRpmbPkg/OpTeeRpmbFvb.c b/Drivers/OpTee/OpteeRpmbPkg/OpTeeRpmbFvb.c
> index 6eb19bed0e..83c2750368 100644
> --- a/Drivers/OpTee/OpteeRpmbPkg/OpTeeRpmbFvb.c
> +++ b/Drivers/OpTee/OpteeRpmbPkg/OpTeeRpmbFvb.c
> @@ -305,7 +305,8 @@ OpTeeRpmbFvbRead (
> }
> }
>
> - Base = (VOID *)Instance->MemBaseAddress + (Lba * Instance->BlockSize) + Offset;
> + Base = (VOID *)(UINTN)Instance->MemBaseAddress + (Lba * Instance->BlockSize) +
> + Offset;
> // We could read the data from the RPMB instead of memory
> // The 2 copies should already be identical
> // Copy from memory image
> @@ -387,7 +388,8 @@ OpTeeRpmbFvbWrite (
> return Status;
> }
> }
> - Base = (VOID *)Instance->MemBaseAddress + Lba * Instance->BlockSize + Offset;
> + Base = (VOID *)(UINTN)Instance->MemBaseAddress + (Lba * Instance->BlockSize) +
> + Offset;
> Status = ReadWriteRpmb (
> SP_SVC_RPMB_WRITE,
> (UINTN)Buffer,
> @@ -477,7 +479,8 @@ OpTeeRpmbFvbErase (
> return EFI_INVALID_PARAMETER;
> }
> NumBytes = NumLba * Instance->BlockSize;
> - Base = (VOID *)Instance->MemBaseAddress + Start * Instance->BlockSize;
> + Base = (VOID *)(UINTN)Instance->MemBaseAddress +
> + (Start * Instance->BlockSize);
> Buf = AllocatePool (NumLba * Instance->BlockSize);
> if (Buf == NULL) {
> return EFI_DEVICE_ERROR;
> @@ -689,7 +692,7 @@ InitializeFvAndVariableStoreHeaders (
> goto Exit;
> }
> // Install the combined header in memory
> - CopyMem ((VOID*)Instance->MemBaseAddress, Headers, HeadersLength);
> + CopyMem ((VOID*)(UINTN)Instance->MemBaseAddress, Headers, HeadersLength);
>
> Exit:
> FreePool (Headers);
> @@ -747,14 +750,18 @@ FvbInitialize (
> // Read the file from disk and copy it to memory
> ReadEntireFlash (Instance);
>
> - FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Instance->MemBaseAddress;
> + FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)(UINTN)Instance->MemBaseAddress;
> Status = ValidateFvHeader (FwVolHeader);
> if (EFI_ERROR (Status)) {
> // There is no valid header, so time to install one.
> DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
>
> // Reset memory
> - SetMem64 ((VOID *)Instance->MemBaseAddress, Instance->NBlocks * Instance->BlockSize, ~0UL);
> + SetMem64 (
> + (VOID *)(UINTN)Instance->MemBaseAddress,
> + Instance->NBlocks * Instance->BlockSize,
> + ~0UL
> + );
> DEBUG ((DEBUG_INFO, "%a: Erasing Flash.\n", __FUNCTION__));
> Status = ReadWriteRpmb (
> SP_SVC_RPMB_WRITE,
> @@ -827,7 +834,7 @@ OpTeeRpmbFvbInit (
> mInstance.FvbProtocol.Write = OpTeeRpmbFvbWrite;
> mInstance.FvbProtocol.Read = OpTeeRpmbFvbRead;
>
> - mInstance.MemBaseAddress = (EFI_PHYSICAL_ADDRESS)Addr;
> + mInstance.MemBaseAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)Addr;
> mInstance.Signature = FLASH_SIGNATURE;
> mInstance.Initialize = FvbInitialize;
> mInstance.BlockSize = EFI_PAGE_SIZE;
> --
> 2.17.1
>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
next prev parent reply other threads:[~2021-05-17 12:46 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 5:50 [edk2-platforms][PATCH v2 1/6] Platform/ARM/SgiPkg: sync with edk2 StandaloneMmCpu path change Etienne Carriere
2021-05-17 5:50 ` [edk2-platforms][PATCH v2 2/6] Platform/Socionext/DeveloperBox: " Etienne Carriere
2021-05-18 14:42 ` Sami Mujawar
2021-05-17 5:50 ` [edk2-platforms][PATCH v2 3/6] Platform/StandaloneMm: " Etienne Carriere
2021-05-17 12:44 ` Ilias Apalodimas
2021-05-18 14:42 ` Sami Mujawar
2021-05-17 5:50 ` [edk2-platforms][PATCH v2 4/6] Drivers/OpTee: Add Aarch32 SVC IDs for 32bit Arm targets Etienne Carriere
2021-05-17 12:45 ` Ilias Apalodimas
2021-05-18 14:42 ` Sami Mujawar
2021-05-17 5:50 ` [edk2-platforms][PATCH v2 5/6] Drivers/OpTee: address cast build warning issue in 32b mode Etienne Carriere
2021-05-17 12:46 ` Ilias Apalodimas [this message]
2021-05-18 14:43 ` Sami Mujawar
2021-05-17 5:50 ` [edk2-platforms][PATCH v2 6/6] Platform/StandaloneMm: build StandaloneMmRpmb for 32bit architectures Etienne Carriere
2021-05-17 12:47 ` Ilias Apalodimas
2021-05-18 14:43 ` Sami Mujawar
2021-05-17 14:21 ` [edk2-platforms][PATCH v2 1/6] Platform/ARM/SgiPkg: sync with edk2 StandaloneMmCpu path change Thomas Abraham
2021-05-18 14:42 ` Sami Mujawar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YKJlmDSo3T8uGu1E@enceladus \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox