Re: [edk2-devel] [OvmfPkg] Build fails due to insufficient FV size in edk2-stable202502

["Richard Lyu via groups.io" <richard.lyu=suse.com@groups.io>]

Hi memristor2, ardb,

Thank you for your suggestions, but since there is a requirement to use a 2MB size, I need to maintain the size at FD_SIZE_2MB. So, is there any other way to reduce the size, such as by modifying the fdf file? 
Would this method be worth trying?

Best Regards,
Richard Lyu

On 2025/03/11 08:03, Ard Biesheuvel wrote:
> On Tue, 11 Mar 2025 at 07:46, Richard Lyu via groups.io
> <richard.lyu=suse.com@groups.io> wrote:
> >
> > I built OVMF with the following options
> >
> > build -D TPM2_ENABLE -D TPM2_CONFIG_ENABLE -D NETWORK_IP6_ENABLE -D NETWORK_HTTP_BOOT_ENABLE -D BUILD_SHELL=FALSE -a X64 -b DEBUG -t GCC5 -p OvmfPkg/OvmfPkgX64.dsc -D FD_SIZE_2MB -D SECURE_BOOT_ENABLE
> >
> >
> > However, I encountered an insufficient FV size issue. This issue did not occur in edk2-stable202411, but it appears in edk2-stable202502.
> >
> > GenFv: ERROR 3000: Invalid
> >   the required fv image size 0x1affc8 exceeds the set fv image size 0x1ac000
> >
> >
> > Is there any way to resolve this?
> >
> 
> Using FD_SIZE_4MB instead of FD_SIZE_2MB should help.


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#121180): https://edk2.groups.io/g/devel/message/121180
Mute This Topic: https://groups.io/mt/111635652/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-