From: "Leif Lindholm" <quic_llindhol@quicinc.com>
To: <devel@edk2.groups.io>, <pierre.gondois@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>, Jeff Brasen <jbrasen@nvidia.com>
Subject: Re: [edk2-devel] [PATCH 1/1] DynamicTablesPkg/AmlLib: Define an enum for IsaRanges
Date: Fri, 22 Sep 2023 16:35:13 +0100 [thread overview]
Message-ID: <ZQ20Mdlq7612vHNR@qc-i7.hemma.eciton.net> (raw)
In-Reply-To: <20230922141817.1651629-1-pierre.gondois@arm.com>
On Fri, Sep 22, 2023 at 16:18:17 +0200, PierreGondois wrote:
> From: Pierre Gondois <pierre.gondois@arm.com>
>
> The IsaRange parameter in:
> - AmlCodeGenRdDWordIo()
> - AmlCodeGenRdQWordIo()
> is an hard-coded value. Define an enum for IsarRanges
> and use it.
>
> Suggested-by: Leif Lindholm <quic_llindhol@quicinc.com>
> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Thanks for this!
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
> ---
> .../Include/Library/AmlLib/AmlLib.h | 28 +++++++++++--------
> .../AcpiSsdtPcieLibArm/SsdtPcieGenerator.c | 2 +-
> .../AmlLib/CodeGen/AmlResourceDataCodeGen.c | 28 +++++++------------
> 3 files changed, 27 insertions(+), 31 deletions(-)
>
> diff --git a/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h b/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
> index 8e24cecdd77b..ce81f5876681 100644
> --- a/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
> +++ b/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
> @@ -59,6 +59,18 @@ typedef void *AML_DATA_NODE_HANDLE;
>
> #endif // AML_HANDLE
>
> +/** Enum for ISA Ranges.
> +
> + See ACPI 6.4 spec, s19.6.34 for more.
> +*/
> +typedef enum {
> + EAmlIsaRangeReserved = 0, ///< Reserved.
> + EAmlIsaRangeNonIsaOnly, ///< NonIsaOnly.
> + EAmlIsaRangeIsaOnly, ///< IsaOnly.
> + EAmlIsaRangeEntireRange, ///< EntireRange.
> + EAmlIsaRangeMax, ///< Max.
> +} EAML_ISA_RANGE;
> +
> /** Parse the definition block.
>
> The function parses the whole AML blob. It starts with the ACPI DSDT/SSDT
> @@ -471,11 +483,7 @@ AmlUpdateRdQWord (
> @param [in] IsMinFixed Minimum address is fixed.
> @param [in] IsMaxFixed Maximum address is fixed.
> @param [in] IsPosDecode Decode parameter
> - @param [in] IsaRanges Possible values are:
> - 0-Reserved
> - 1-NonISAOnly
> - 2-ISAOnly
> - 3-EntireRange
> + @param [in] IsaRanges Isa Range.
> @param [in] AddressGranularity Address granularity.
> @param [in] AddressMinimum Minimum address.
> @param [in] AddressMaximum Maximum address.
> @@ -505,7 +513,7 @@ AmlCodeGenRdDWordIo (
> IN BOOLEAN IsMinFixed,
> IN BOOLEAN IsMaxFixed,
> IN BOOLEAN IsPosDecode,
> - IN UINT8 IsaRanges,
> + IN EAML_ISA_RANGE IsaRanges,
> IN UINT32 AddressGranularity,
> IN UINT32 AddressMinimum,
> IN UINT32 AddressMaximum,
> @@ -702,11 +710,7 @@ AmlCodeGenRdWordBusNumber (
> @param [in] IsMinFixed Minimum address is fixed.
> @param [in] IsMaxFixed Maximum address is fixed.
> @param [in] IsPosDecode Decode parameter
> - @param [in] IsaRanges Possible values are:
> - 0-Reserved
> - 1-NonISAOnly
> - 2-ISAOnly
> - 3-EntireRange
> + @param [in] IsaRanges Isa Range.
> @param [in] AddressGranularity Address granularity.
> @param [in] AddressMinimum Minimum address.
> @param [in] AddressMaximum Maximum address.
> @@ -736,7 +740,7 @@ AmlCodeGenRdQWordIo (
> IN BOOLEAN IsMinFixed,
> IN BOOLEAN IsMaxFixed,
> IN BOOLEAN IsPosDecode,
> - IN UINT8 IsaRanges,
> + IN EAML_ISA_RANGE IsaRanges,
> IN UINT64 AddressGranularity,
> IN UINT64 AddressMinimum,
> IN UINT64 AddressMaximum,
> diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGenerator.c
> index 9ddaddc198fa..87b426ccfe07 100644
> --- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGenerator.c
> +++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGenerator.c
> @@ -545,7 +545,7 @@ GeneratePciCrs (
> TRUE,
> TRUE,
> IsPosDecode,
> - 3,
> + EAmlIsaRangeEntireRange,
> 0,
> AddrMapInfo->PciAddress,
> AddrMapInfo->PciAddress + AddrMapInfo->AddressSize - 1,
> diff --git a/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlResourceDataCodeGen.c b/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlResourceDataCodeGen.c
> index 9c6700b9e08c..707e8182b4c0 100644
> --- a/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlResourceDataCodeGen.c
> +++ b/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlResourceDataCodeGen.c
> @@ -121,13 +121,13 @@ STATIC
> UINT8
> EFIAPI
> RdIoRangeSpecificFlags (
> - IN UINT8 IsaRanges,
> - IN BOOLEAN IsDenseTranslation,
> - IN BOOLEAN IsTypeStatic
> + IN EAML_ISA_RANGE IsaRanges,
> + IN BOOLEAN IsDenseTranslation,
> + IN BOOLEAN IsTypeStatic
> )
> {
> // Only check type specific parameters.
> - if (IsaRanges > 3) {
> + if (IsaRanges >= EAmlIsaRangeMax) {
> ASSERT (0);
> return MAX_UINT8;
> }
> @@ -440,20 +440,16 @@ AmlCodeGenRdDWordSpace (
> @param [in] IsMinFixed Minimum address is fixed.
> @param [in] IsMaxFixed Maximum address is fixed.
> @param [in] IsPosDecode Decode parameter
> - @param [in] IsaRanges Possible values are:
> - 0-Reserved
> - 1-NonISAOnly
> - 2-ISAOnly
> - 3-EntireRange
> + @param [in] IsaRanges Isa Range.
> @param [in] AddressGranularity Address granularity.
> @param [in] AddressMinimum Minimum address.
> @param [in] AddressMaximum Maximum address.
> @param [in] AddressTranslation Address translation.
> @param [in] RangeLength Range length.
> @param [in] ResourceSourceIndex Resource Source index.
> - Unused. Must be 0.
> + Not supported. Must be 0.
> @param [in] ResourceSource Resource Source.
> - Unused. Must be NULL.
> + Not supported. Must be NULL.
> @param [in] IsDenseTranslation TranslationDensity parameter.
> @param [in] IsTypeStatic TranslationType parameter.
> @param [in] NameOpNode NameOp object node defining a named object.
> @@ -474,7 +470,7 @@ AmlCodeGenRdDWordIo (
> IN BOOLEAN IsMinFixed,
> IN BOOLEAN IsMaxFixed,
> IN BOOLEAN IsPosDecode,
> - IN UINT8 IsaRanges,
> + IN EAML_ISA_RANGE IsaRanges,
> IN UINT32 AddressGranularity,
> IN UINT32 AddressMinimum,
> IN UINT32 AddressMaximum,
> @@ -1031,11 +1027,7 @@ AmlCodeGenRdQWordSpace (
> @param [in] IsMinFixed Minimum address is fixed.
> @param [in] IsMaxFixed Maximum address is fixed.
> @param [in] IsPosDecode Decode parameter
> - @param [in] IsaRanges Possible values are:
> - 0-Reserved
> - 1-NonISAOnly
> - 2-ISAOnly
> - 3-EntireRange
> + @param [in] IsaRanges Isa Range.
> @param [in] AddressGranularity Address granularity.
> @param [in] AddressMinimum Minimum address.
> @param [in] AddressMaximum Maximum address.
> @@ -1065,7 +1057,7 @@ AmlCodeGenRdQWordIo (
> IN BOOLEAN IsMinFixed,
> IN BOOLEAN IsMaxFixed,
> IN BOOLEAN IsPosDecode,
> - IN UINT8 IsaRanges,
> + IN EAML_ISA_RANGE IsaRanges,
> IN UINT64 AddressGranularity,
> IN UINT64 AddressMinimum,
> IN UINT64 AddressMaximum,
> --
> 2.25.1
>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109016): https://edk2.groups.io/g/devel/message/109016
Mute This Topic: https://groups.io/mt/101521874/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
prev parent reply other threads:[~2023-09-22 15:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-22 14:18 [edk2-devel] [PATCH 1/1] DynamicTablesPkg/AmlLib: Define an enum for IsaRanges PierreGondois
2023-09-22 14:24 ` Jeff Brasen via groups.io
2023-09-22 15:35 ` Leif Lindholm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZQ20Mdlq7612vHNR@qc-i7.hemma.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox