From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io, philmd@redhat.com
Cc: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org,
samer.el-haj-mahmoud@arm.com, andrey.warkentin@gmail.com
Subject: Re: [edk2-devel] [edk2-platforms][PATCH 1/5] Silicon/Bcm283x: Clean up Bcm2836.h header
Date: Wed, 27 Nov 2019 14:59:30 +0000 [thread overview]
Message-ID: <a1c8f2aa-4739-40b3-0093-24bffce27a73@akeo.ie> (raw)
In-Reply-To: <6832e7c5-5aa7-04e4-0ed6-91165ae900e8@redhat.com>
On 2019.11.27 14:47, Philippe Mathieu-Daudé wrote:
> On 11/27/19 1:37 PM, Pete Batard wrote:
>> Add missing RNG registers,
>
> This is one change.
>
>> prefer reusing shorter define's
>> instead of PCDs and clean up spacing.
>
> This is another change.
All these changes belong to a "cleanup" category, which is what,
globally, this patch is all about. Of course, I expect people to argue
that adding trivial missing data does not count as cleaning up, which
I'd disagree with, but then again, it's not my repo.
> Why suddenly go back to fixed PERIPHERAL block base address?
Earlier version was:
#define BCM2836_WDOG_BASE_ADDRESS 0x3f100000
which we replaced with:
#define BCM2836_WDOG_BASE_ADDRESS (FixedPcdGet64
(PcdBcm283xRegistersAddress) + BCM2836_WDOG_OFFSET)
But considering that we have "BCM2836_SOC_REGISTERS" that now equates
"(FixedPcdGet64
(PcdBcm283xRegistersAddress))" we can write the exact same thing as
above, only shorter, which we do.
I personally find this more understandable for newcomers who'll be
looking at the code and easier to maintain. But I'm not the maintainer,
so I'll go with whatever suits you.
Regards,
/Pete
>
>>
>> Signed-off-by: Pete Batard <pete@akeo.ie>
>> ---
>> Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h | 23
>> ++++++++++++--------
>> 1 file changed, 14 insertions(+), 9 deletions(-)
>>
>> diff --git
>> a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
>> b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
>> index 72c8e9dc4b14..744c7ac3b9f4 100644
>> --- a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
>> +++ b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
>> @@ -24,8 +24,7 @@
>> /* watchdog constants */
>> #define BCM2836_WDOG_OFFSET 0x00100000
>> -#define BCM2836_WDOG_BASE_ADDRESS
>> (FixedPcdGet64 (PcdBcm283xRegistersAddress) \
>> - +
>> BCM2836_WDOG_OFFSET)
>> +#define BCM2836_WDOG_BASE_ADDRESS
>> (BCM2836_SOC_REGISTERS + BCM2836_WDOG_OFFSET)
>> #define BCM2836_WDOG_PASSWORD 0x5a000000
>> #define BCM2836_WDOG_RSTC_OFFSET 0x0000001c
>> #define BCM2836_WDOG_WDOG_OFFSET 0x00000024
>> @@ -34,8 +33,7 @@
>> /* mailbox interface constants */
>> #define BCM2836_MBOX_OFFSET 0x0000b880
>> -#define BCM2836_MBOX_BASE_ADDRESS
>> (FixedPcdGet64 (PcdBcm283xRegistersAddress) \
>> - +
>> BCM2836_MBOX_OFFSET)
>> +#define BCM2836_MBOX_BASE_ADDRESS
>> (BCM2836_SOC_REGISTERS + BCM2836_MBOX_OFFSET)
>> #define BCM2836_MBOX_READ_OFFSET 0x00000000
>> #define BCM2836_MBOX_STATUS_OFFSET 0x00000018
>> #define BCM2836_MBOX_CONFIG_OFFSET 0x0000001c
>> @@ -51,12 +49,19 @@
>> #define BCM2836_INTC_TIMER_PENDING_OFFSET 0x00000060
>> /* random number generator */
>> -#define RNG_BASE_ADDRESS (BCM2836_SOC_REGISTERS + 0x00104000)
>> +#define BCM2836_RNG_OFFSET 0x00104000
>> +#define RNG_BASE_ADDRESS
>> (BCM2836_SOC_REGISTERS + BCM2836_RNG_OFFSET)
>> -#define RNG_CTRL (RNG_BASE_ADDRESS + 0x0)
>> -#define RNG_STATUS (RNG_BASE_ADDRESS + 0x4)
>> -#define RNG_DATA (RNG_BASE_ADDRESS + 0x8)
>> +#define RNG_CTRL
>> (RNG_BASE_ADDRESS + 0x0)
>> +#define RNG_STATUS
>> (RNG_BASE_ADDRESS + 0x4)
>> +#define RNG_DATA
>> (RNG_BASE_ADDRESS + 0x8)
>> +#define RNG_BIT_COUNT
>> (RNG_BASE_ADDRESS + 0xc)
>> +#define RNG_BIT_COUNT_THRESHOLD
>> (RNG_BASE_ADDRESS + 0x10)
>> +#define RNG_INT_STATUS
>> (RNG_BASE_ADDRESS + 0x18)
>> +#define RNG_INT_ENABLE
>> (RNG_BASE_ADDRESS + 0x1c)
>> +#define RNG_FIFO_DATA
>> (RNG_BASE_ADDRESS + 0x20)
>> +#define RNG_FIFO_COUNT
>> (RNG_BASE_ADDRESS + 0x24)
>> -#define RNG_CTRL_ENABLE 0x1
>> +#define RNG_CTRL_ENABLE 0x1
>> #endif /*__BCM2836_H__ */
>>
>
>
>
>
next prev parent reply other threads:[~2019-11-27 14:59 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-27 12:37 [edk2-platforms][PATCH 0/5] Further RPi4 support groundwork Pete Batard
2019-11-27 12:37 ` [edk2-platforms][PATCH 1/5] Silicon/Bcm283x: Clean up Bcm2836.h header Pete Batard
2019-11-27 12:48 ` Ard Biesheuvel
2019-11-27 12:56 ` Pete Batard
2019-11-27 13:00 ` Ard Biesheuvel
2019-11-27 13:09 ` Pete Batard
2019-11-27 13:17 ` Ard Biesheuvel
2019-11-27 13:21 ` Pete Batard
2019-11-27 14:47 ` Philippe Mathieu-Daudé
2019-11-27 14:59 ` Pete Batard [this message]
2019-11-27 15:18 ` [edk2-devel] " Philippe Mathieu-Daudé
2019-11-27 12:37 ` [edk2-platforms][PATCH 2/5] Silicon/Bcm283x: Add FIFO mode for RNG Pete Batard
2019-11-27 12:44 ` Ard Biesheuvel
2019-11-27 12:47 ` Pete Batard
2019-11-27 12:37 ` [edk2-platforms][PATCH 3/5] Platform/RPi/MmcDxe: Factorize SCR call and clean up MMC init Pete Batard
2019-11-27 12:37 ` [edk2-platforms][PATCH 4/5] Platform/RPi/MmcDxe: Improve MMC driver stability Pete Batard
2019-11-27 12:37 ` [edk2-platforms][PATCH 5/5] Platform/RPi: Set SD routing according to model Pete Batard
2019-11-27 15:24 ` Philippe Mathieu-Daudé
2019-11-27 16:33 ` Pete Batard
2019-11-27 17:04 ` Leif Lindholm
2019-11-27 17:17 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a1c8f2aa-4739-40b3-0093-24bffce27a73@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox