Hi, Any suggestions. Regards, Navdeep From: Singh, Navdeeppal Sent: Thursday, April 30, 2020 10:39 AM To: 'Leif Lindholm'; 'devel@edk2.groups.io'; 'guomin.jiang@intel.com' Cc: 'spbrogan@outlook.com'; 'sean.brogan@microsoft.com'; 'Bret.Barkelew@microsoft.com'; 'jim.slaughter@sage-micro.com' Subject: RE: [edk2-devel] EDK2 environment setup Hi, After launching Winhost.exe. Emulator exits after displaying "Sec Has Started". I have not built any platform pkgs yet. This is just after building Emulator Pkg . To boot to Shell what shall I do. How can I achive this. Is there a document I can refer to. [cid:image001.jpg@01D62201.0F368030] Regards, Navdeep -----Original Message----- From: Singh, Navdeeppal Sent: Tuesday, April 28, 2020 3:23 PM To: 'Leif Lindholm'; devel@edk2.groups.io; guomin.jiang@intel.com Cc: spbrogan@outlook.com; sean.brogan@microsoft.com; Bret.Barkelew@microsoft.com; jim.slaughter@sage-micro.com Subject: RE: [edk2-devel] EDK2 environment setup Thank you. Able to build Emulator pkg after adding VS2019 build options. Regards, Navdeep -----Original Message----- From: Leif Lindholm > Sent: Tuesday, April 28, 2020 3:18 PM To: devel@edk2.groups.io; guomin.jiang@intel.com Cc: Singh, Navdeeppal; spbrogan@outlook.com; sean.brogan@microsoft.com; Bret.Barkelew@microsoft.com; jim.slaughter@sage-micro.com Subject: Re: [edk2-devel] EDK2 environment setup [EXTERNAL EMAIL] My bad, was checking on a different computer than I thought where the edk2 checkout wasn't up to date. Still, gives me a way to close out the stackoverflow question, so thanks :) / Leif On Tue, Apr 28, 2020 at 09:35:22 +0000, Guomin Jiang wrote: > It is known issue and can refer https://bugzilla.tianocore.org/show_bug.cgi?id=2637 for detail. > > It have been fixed in newest repository, you can update to the newest repository and try again. > > From: devel@edk2.groups.io > On Behalf Of > Navdeeppal.Singh@dell.com > Sent: Tuesday, April 28, 2020 5:15 PM > To: spbrogan@outlook.com; devel@edk2.groups.io; > sean.brogan@microsoft.com; Bret.Barkelew@microsoft.com; > jim.slaughter@sage-micro.com > Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup > > > Hi, > > Yes I am using edksetup.bat. > > I was able to fix VFR compiler after making path changes. > > And I was able to build MdeModulePkg Successfully. > > But while building Emulator Pkg. I see the following Linker Error. Do I need to build some other module before building Emulator Pkg. > > > > [cid:image001.jpg@01D61D83.5E9F0750] > > > > Regards, > > Navdeep > > -----Original Message----- > From: Sean Brogan >> > Sent: Tuesday, April 28, 2020 2:28 AM > To: devel@edk2.groups.io>; Singh, > Navdeeppal; > sean.brogan@microsoft.com>; > Bret.Barkelew@microsoft.com>; > jim.slaughter@sage-micro.com> > Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup > > > > > > [EXTERNAL EMAIL] > > > > Are you using edksetup.bat? I would have expected this code to set the path for you. > > https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat# > L134 > > So without more logs i don't know. > > > > > > > > If you want to use "stuart" (my preferred method) I have a commit here for EmulatorPkg which has a platformbuild.py and readme.md that describes the process. This should be committed to edk2 master this week to enable Platform CI for every PR. > > > > Here is the readme and details. > > https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtE > mulatorPackages_v10/EmulatorPkg/PlatformCI > > > > Here is the commit you should cherry-pick if you want to try it. > > > > https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd > 76f068d0a2 > > > > > > > > Thanks > > Sean > > > > > > > > On 4/27/2020 1:26 AM, Navdeeppal.Singh@dell.com> wrote: > > > Hi, > > > > > > Thanks for your help. > > > > > > I am to build base tools and able to generate bin files. > > > > > > "Build" command is generated. > > > > > > Later, I am trying to build "EmulatorPkg". > > > > > > And running into VfrCompile error. > > > > > > 'VfrCompile' is not recognized as an internal or external command, > > > > > > operable program or batch file. > > > > > > NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1' > > > > > > Stop. > > > > > > 'VfrCompile' is not recognized as an internal or external command, > > > > > > operable program or batch file. > > > > > > I can see VfrCompile.exe generated in "BaseTools". > > > > > > Attached build log for "Emulator Pkg". > > > > > > I tried checking the Env Paths . > > > > > > Regards, > > > > > > Navdeep > > > > > > *From:* Sean Brogan > > >> > > > *Sent:* Friday, April 24, 2020 12:33 AM > > > *To:* devel@edk2.groups.io>; Singh, > > Navdeeppal; Bret Barkelew; > > > jim.slaughter@sage-micro.com> > > > *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup > > > > > > [EXTERNAL EMAIL] > > > > > > Navdeep, > > > > > > Yes since the 202002 stable tag there have been submodules > > introduced > > > to the basetools. If you look closely you will see in the CI > > process > > > this required a change where stuart_setup is run before calling > > > edk2toolsbuild.py. > > > > > > https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb > > 36 > > > 8080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1 > > > > > > If you are using "stuart" to build then that is the suggested path > > as > > > stuar_setup will init your submodules listed in the > > RequiredSubmodules > > > (https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136). > > > Given that the edk2 project and ecosystem has numerous ways to setup > > > your environment and build, you can also just make sure your > > workspace > > > is complete prior to running Edk2ToolsBuild.py. In this case you > > only > > > need to run "git submodule update --init" > > > > > > I just did this and it works fine with VS2019. > > > > > > Jim, > > > > > > Just as fyi as I know there are lots of reasons for toolchain selection. > > > > > > I believe the Visual studio build tools are available free of charge > > > (not the IDE but the compilers). Directions here. > > > https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual > > -s > > > tudio-2019-preferred > > > > > > Thanks > > > > > > Sean > > > > > > *From:* devel@edk2.groups.io> > > > > > > > :devel@edk2.groups.io>>> *On Behalf Of > > > *Navdeeppal.Singh via groups.io > > > *Sent:* Thursday, April 23, 2020 9:14 AM > > > *To:* Bret Barkelew > > >; > > devel@edk2.groups.io> > > > > > > *Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup > > > > > > Hi Bret, > > > > > > Yes PIP requirements are up to date. > > > > > > On further digging through the logging file BASETOOLS_BUILD.txt. > > > > > > INFO - subprocess not exit successfully > > > > > > INFO - Error while execute command 'nmake all' in direcotry > > > C:\edk2\BaseTools\Source\C\BrotliCompress > > > > > > Regards, > > > > > > Navdeep > > > > > > *From:* Bret Barkelew > > > > > > *Sent:* Thursday, April 23, 2020 9:37 PM > > > *To:* devel@edk2.groups.io> > > ; Singh, > > > Navdeeppal > > > *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup > > > > > > [EXTERNAL EMAIL] > > > > > > Have you installed the up-to-date Python requirements? "pip install > > > -upgrade -r pip-requirements.txt"? > > > > > > That's the first thing I would check. Otherwise, happy to look at > > the > > > problem with you. > > > > > > - Bret > > > > > > *From: *NAVDEEPPAL_SINGH via groups.io > > > > > > *Sent: *Thursday, April 23, 2020 6:05 AM > > > *To: *devel@edk2.groups.io> > > > > > *Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup > > > > > > I am trying to setup EDK2 environment setup from Tianocore/EDK2. > > > While doing the Base Tool setup. After running > > > BaseTool/EDK2ToolsBuild.py -t VS2019 Getting following error :- > > > c:\edk2\BaseTools>python Edk2ToolsBuild.py -t VS2019 SECTION - Init > > > SDE SECTION - Loading Plugins SECTION - Start Invocable Tool > > Traceback > > > (most recent call last): > > > File "Edk2ToolsBuild.py", line 177, in > > > main() > > > File "Edk2ToolsBuild.py", line 173, in main > > > Edk2ToolsBuild().Invoke() > > > File "C:\Program > > > Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable > > .p > > > y", line 141, in Invoke > > > retcode = self.Go() > > > File "Edk2ToolsBuild.py", line 139, in Go > > > raise Exception("Failed to build.") > > > Exception: Failed to build. > > > > > > set EDK_TOOLS_PATH=C:\edk2\BaseTools > > > set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32 > > > Can some one help > > > > > > >