From: "Sami Mujawar" <sami.mujawar@arm.com>
To: Pranav Madhu <pranav.madhu@arm.com>, devel@edk2.groups.io
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>, nd@arm.com
Subject: Re: [edk2-platforms][PATCH V2 10/11] Platform/Sgi: Add SMBIOS Type19 Table
Date: Mon, 17 May 2021 16:33:51 +0100 [thread overview]
Message-ID: <a3cb93ff-77ec-c842-0b28-e7c7ba666963@arm.com> (raw)
In-Reply-To: <20210516092917.21124-11-pranav.madhu@arm.com>
Hi Pranav,
Please find my comments inline marked [SAMI].
Some comments in previous patches apply here as well and are not mentioned.
With those addressed.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Regards,
Sami Mujawar
On 16/05/2021 10:29 AM, Pranav Madhu wrote:
> Add the SMBIOS type 19 table (Memory Array Mapped Addr) that includes
> information about the address mapping for a Physical Memory Array.
>
> Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
> ---
> Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.inf | 1 +
> Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.h | 6 ++
> Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.c | 1 +
> Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/Type19MemoryArrayMappedAddress.c | 92 ++++++++++++++++++++
> 4 files changed, 100 insertions(+)
>
> diff --git a/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.inf b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
> index 9061c491d461..f81494114188 100644
> --- a/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
> +++ b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
> @@ -22,6 +22,7 @@
> Type7CacheInformation.c
> Type16PhysicalMemoryArray.c
> Type17MemoryDevice.c
> + Type19MemoryArrayMappedAddress.c
>
> [Packages]
> ArmPkg/ArmPkg.dec
> diff --git a/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.h b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.h
> index 5413982e233b..c6dd72cb6b99 100644
> --- a/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.h
> +++ b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.h
> @@ -53,6 +53,12 @@ InstallMemoryDevice (
> IN EFI_SMBIOS_PROTOCOL *Smbios
> );
>
> +EFI_STATUS
> +EFIAPI
> +InstallMemoryArrayMappedAddress (
> + IN EFI_SMBIOS_PROTOCOL *Smbios
> + );
> +
> enum SMBIOS_REFRENCE_HANDLES {
> SMBIOS_HANDLE_ENCLOSURE = 0x1000,
> SMBIOS_HANDLE_CLUSTER1,
> diff --git a/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.c b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.c
> index 223bf1d114e4..d5d1e6393184 100644
> --- a/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.c
> +++ b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe.c
> @@ -33,6 +33,7 @@ ARM_RD_SMBIOS_TABLE_INSTALL_FPTR mSmbiosTableList[] = {
> &InstallCacheInformation,
> &InstallPhysicalMemoryArray,
> &InstallMemoryDevice,
> + &InstallMemoryArrayMappedAddress,
> };
>
> /**
> diff --git a/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/Type19MemoryArrayMappedAddress.c b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/Type19MemoryArrayMappedAddress.c
> new file mode 100644
> index 000000000000..de458ab29e68
> --- /dev/null
> +++ b/Platform/ARM/SgiPkg/Drivers/SmbiosPlatformDxe/Type19MemoryArrayMappedAddress.c
> @@ -0,0 +1,92 @@
> +/** @file
> + SMBIOS Type 19 (Memory Array Mapped Address) table for ARM RD platforms.
> +
> + This file installs SMBIOS Type 19 (Memory Array Mapped Address) table for Arm's
> + Reference Design platforms. It includes information about the address mapping
> + for a Physical Memory Array.
> +
> + Copyright (c) 2021, ARM Limited. All rights reserved.
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Specification Reference:
> + - SMBIOS Reference Specification 3.4.0, Chapter 7.20
> +**/
> +
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Protocol/Smbios.h>
> +
> +#include "SmbiosPlatformDxe.h"
> +
> +#define TYPE19_STRINGS \
> + "\0" /* Null string */
> +
> +/* SMBIOS Type19 structure */
> +#pragma pack(1)
> +struct ArmRdSmbiosType19 {
> + SMBIOS_TABLE_TYPE19 Base;
> + UINT8 Strings[sizeof (TYPE19_STRINGS)];
> +};
> +#pragma pack()
> +
> +/* Memory Array Mapped Address */
> +static struct ArmRdSmbiosType19 mArmRdSmbiosType19 = {
> + {
> + {
> + // SMBIOS header
> + EFI_SMBIOS_TYPE_MEMORY_ARRAY_MAPPED_ADDRESS, // Type 19
> + sizeof (SMBIOS_TABLE_TYPE19), // Length
> + SMBIOS_HANDLE_PI_RESERVED, // Assign an unused handle number
> + },
> + 0, // Starting address
> + 0, // Ending address
> + SMBIOS_HANDLE_PHYSICAL_MEMORY, // Memory array handle
> + 1 // Partition width
> + },
> + // Text strings (unformatted area)
> + TYPE19_STRINGS
> +};
> +
> +/**
> + Install SMBIOS memory array mapped address table
> +
> + Install the SMBIOS memory array mapped address (type 19) table for RD
> + platforms.
> +
> + @param[in] Smbios SMBIOS protocol.
> +
> + @retval EFI_SUCCESS Record was added.
> + @retval EFI_OUT_OF_RESOURCES Record was not added.
> + @retval EFI_ALREADY_STARTED The SmbiosHandle passed in is already in use.
> +**/
> +EFI_STATUS
> +InstallMemoryArrayMappedAddress (
> + IN EFI_SMBIOS_PROTOCOL *Smbios
> + )
> +{
> + EFI_STATUS Status;
> + EFI_SMBIOS_HANDLE SmbiosHandle;
> +
> + SmbiosHandle = ((EFI_SMBIOS_TABLE_HEADER *)&mArmRdSmbiosType19)->Handle;
> +
> + mArmRdSmbiosType19.Base.StartingAddress = PcdGet64 (PcdSystemMemoryBase) / SIZE_1KB;
> + mArmRdSmbiosType19.Base.EndingAddress = ((PcdGet64 (PcdSystemMemoryBase) +
> + (PcdGet64 (PcdSystemMemorySize) + SIZE_16MB)) / // 16MB Trusted DRAM
> + SIZE_1KB) - 1;
[SAMI] Same comment as for patch 9/11. Can you atleast add some
validation to ensure that the encoding would be correct, please?
[/SAMI]
> +
> + /* Install type 19 table */
> + Status = Smbios->Add (
> + Smbios,
> + NULL,
> + &SmbiosHandle,
> + (EFI_SMBIOS_TABLE_HEADER *)&mArmRdSmbiosType19
> + );
> + if (Status != EFI_SUCCESS) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "SMBIOS: Failed to install Type19 SMBIOS table.\n"
> + ));
> + }
> +
> + return Status;
> +}
next prev parent reply other threads:[~2021-05-17 15:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-16 9:29 [edk2-platforms][PATCH V2 00/11] Add SMBIOS tables for Arm's Reference Design platforms Pranav Madhu
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 01/11] Platform/Sgi: Define RD-N2 platform id values Pranav Madhu
2021-05-17 15:32 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 02/11] Platform/Sgi: Add GetProductId API for SGI/RD Platforms Pranav Madhu
2021-05-17 15:32 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 03/11] Platform/Sgi: Add Initial SMBIOS support Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 04/11] Platform/Sgi: Add SMBIOS Type1 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 05/11] Platform/Sgi: Add SMBIOS Type3 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 06/11] Platform/Sgi: Add SMBIOS Type4 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 07/11] Platform/Sgi: Add SMBIOS Type7 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 08/11] Platform/Sgi: Add SMBIOS Type16 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 09/11] Platform/Sgi: Add SMBIOS Type17 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 10/11] Platform/Sgi: Add SMBIOS Type19 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar [this message]
2021-05-16 9:29 ` [edk2-platforms][PATCH V2 11/11] Platform/Sgi: Add SMBIOS Type32 Table Pranav Madhu
2021-05-17 15:33 ` Sami Mujawar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a3cb93ff-77ec-c842-0b28-e7c7ba666963@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox