public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Laszlo Ersek <lersek@redhat.com>
To: Ruiyu Ni <ruiyu.ni@intel.com>, edk2-devel@lists.01.org
Cc: Star Zeng <star.zeng@intel.com>
Subject: Re: [PATCH 1/3] MdeModulePkg/PciHostBridge: Enhance boundary check in Io/Mem.Read/Write
Date: Fri, 21 Sep 2018 12:53:57 +0200	[thread overview]
Message-ID: <a9646d7d-0d27-ff9f-2058-b3aded9fbb32@redhat.com> (raw)
In-Reply-To: <20180921072539.268068-2-ruiyu.ni@intel.com>

On 09/21/18 09:25, Ruiyu Ni wrote:
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Star Zeng <star.zeng@intel.com>
> ---
>  .../Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c     | 26 +++++++++++++++++-----
>  1 file changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> index f8a1239ceb..0b6b56f846 100644
> --- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> @@ -321,6 +321,7 @@ RootBridgeIoCheckParameter (
>    UINT64                                       Base;
>    UINT64                                       Limit;
>    UINT32                                       Size;
> +  UINT64                                       Length;
>  
>    //
>    // Check to see if Buffer is NULL
> @@ -337,7 +338,7 @@ RootBridgeIoCheckParameter (
>    }
>  
>    //
> -  // For FIFO type, the target address won't increase during the access,
> +  // For FIFO type, the device address won't increase during the access,
>    // so treat Count as 1
>    //
>    if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) {
> @@ -347,6 +348,13 @@ RootBridgeIoCheckParameter (
>    Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
>    Size  = 1 << Width;
>  
> +  //
> +  // Make sure (Count * Size) doesn't exceed MAX_UINT64
> +  //
> +  if (Count > DivU64x32 (MAX_UINT64, Size)) {
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
>    //
>    // Check to see if Address is aligned
>    //
> @@ -354,6 +362,14 @@ RootBridgeIoCheckParameter (
>      return EFI_UNSUPPORTED;
>    }
>  
> +  //
> +  // Make sure (Address + Count * Size) doesn't exceed MAX_UINT64
> +  //
> +  Length = MultU64x32 (Count, Size);
> +  if (Address > MAX_UINT64 - Length) {
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
>    RootBridge = ROOT_BRIDGE_FROM_THIS (This);
>  
>    //
> @@ -372,7 +388,7 @@ RootBridgeIoCheckParameter (
>      //
>      // Allow Legacy IO access
>      //
> -    if (Address + MultU64x32 (Count, Size) <= 0x1000) {
> +    if (Address + Length <= 0x1000) {
>        if ((RootBridge->Attributes & (
>             EFI_PCI_ATTRIBUTE_ISA_IO | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO | EFI_PCI_ATTRIBUTE_VGA_IO |
>             EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO |
> @@ -386,7 +402,7 @@ RootBridgeIoCheckParameter (
>      //
>      // Allow Legacy MMIO access
>      //
> -    if ((Address >= 0xA0000) && (Address + MultU64x32 (Count, Size)) <= 0xC0000) {
> +    if ((Address >= 0xA0000) && (Address + Length) <= 0xC0000) {
>        if ((RootBridge->Attributes & EFI_PCI_ATTRIBUTE_VGA_MEMORY) != 0) {
>          return EFI_SUCCESS;
>        }
> @@ -395,7 +411,7 @@ RootBridgeIoCheckParameter (
>      // By comparing the Address against Limit we know which range to be used
>      // for checking
>      //
> -    if (Address + MultU64x32 (Count, Size) <= RootBridge->Mem.Limit + 1) {
> +    if (Address + Length <= RootBridge->Mem.Limit + 1) {
>        Base = RootBridge->Mem.Base;
>        Limit = RootBridge->Mem.Limit;
>      } else {
> @@ -427,7 +443,7 @@ RootBridgeIoCheckParameter (
>        return EFI_INVALID_PARAMETER;
>    }
>  
> -  if (Address + MultU64x32 (Count, Size) > Limit + 1) {
> +  if (Address + Length > Limit + 1) {
>      return EFI_INVALID_PARAMETER;
>    }
>  
> 

Reviewed-by: Laszlo Ersek <lersek@redhat.com>


  reply	other threads:[~2018-09-21 10:53 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21  7:25 [PATCH 0/3] Fix a bug that prevents PMEM access Ruiyu Ni
2018-09-21  7:25 ` [PATCH 1/3] MdeModulePkg/PciHostBridge: Enhance boundary check in Io/Mem.Read/Write Ruiyu Ni
2018-09-21 10:53   ` Laszlo Ersek [this message]
2018-09-24 13:18   ` Kirkendall, Garrett
2018-09-25  2:14   ` Zeng, Star
2018-09-25  2:43     ` Ni, Ruiyu
2018-09-25  3:02       ` Zeng, Star
2018-09-21  7:25 ` [PATCH 2/3] MdeModulePkg/PciHostBridge: Fix a bug that prevents PMEM access Ruiyu Ni
2018-09-21 11:06   ` Laszlo Ersek
2018-09-25  2:11     ` Ni, Ruiyu
2018-09-24 13:19   ` Kirkendall, Garrett
2018-09-25  2:15   ` Zeng, Star
2018-09-21  7:25 ` [PATCH 3/3] MdeModulePkg/PciHostBridge: Add RESOURCE_VALID() to simplify code Ruiyu Ni
2018-09-21 11:12   ` Laszlo Ersek
2018-09-25  2:25     ` Ni, Ruiyu
2018-09-25  2:35     ` Zeng, Star
2018-09-25  2:47       ` Ni, Ruiyu
2018-09-25  3:13         ` Zeng, Star
2018-09-25  5:03           ` Ni, Ruiyu
2018-09-24 13:20   ` Kirkendall, Garrett

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a9646d7d-0d27-ff9f-2058-b3aded9fbb32@redhat.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox