From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail02.groups.io (mail02.groups.io [66.175.222.108]) by spool.mail.gandi.net (Postfix) with ESMTPS id 668D6740045 for ; Wed, 13 Sep 2023 22:15:39 +0000 (UTC) DKIM-Signature: a=rsa-sha256; bh=SdSXNXslT9aGSLvCGsVnd8k+VYGauEtOZ61lmAA0wBE=; c=relaxed/simple; d=groups.io; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References:MIME-Version:Precedence:List-Subscribe:List-Help:Sender:List-Id:Mailing-List:Delivered-To:Reply-To:List-Unsubscribe-Post:List-Unsubscribe:Content-Transfer-Encoding; s=20140610; t=1694643338; v=1; b=TCIv6WEe1pUOqkZI3POugVh8AvJwgJgd/coGCJMnxKRIByPrK5vCWz8/QTCRqsxK43tHW3Pk bj1SribD4v5HOsmlLwovVmB2kjPkohiItG8TZLQkxTtvtt8rasD79rQ9MIm4iQaj5JFwWK/DLsx UZfaU5zsztqwp1VxqlFYOo8I= X-Received: by 127.0.0.2 with SMTP id wZnJYY7687511xE6jZQoMSTx; Wed, 13 Sep 2023 15:15:38 -0700 X-Received: from mgamail.intel.com (mgamail.intel.com [134.134.136.31]) by mx.groups.io with SMTP id smtpd.web11.10460.1694643331850179841 for ; Wed, 13 Sep 2023 15:15:33 -0700 X-IronPort-AV: E=McAfee;i="6600,9927,10832"; a="442824385" X-IronPort-AV: E=Sophos;i="6.02,144,1688454000"; d="scan'208";a="442824385" X-Received: from fmsmga002.fm.intel.com ([10.253.24.26]) by orsmga104.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 13 Sep 2023 15:14:13 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=McAfee;i="6600,9927,10832"; a="859460056" X-IronPort-AV: E=Sophos;i="6.02,144,1688454000"; d="scan'208";a="859460056" X-Received: from fmbiosdev02.amr.corp.intel.com ([10.105.221.44]) by fmsmga002-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 13 Sep 2023 15:14:13 -0700 From: "Saloni Kasbekar" To: devel@edk2.groups.io Cc: Saloni Kasbekar , Sai Chaganty , Nate DeSimone , Rosen Chuang Subject: [edk2-devel] [PATCH 05/10] AlderlakeSiliconPkg/Include: Add ConfigBlock headers Date: Wed, 13 Sep 2023 15:13:56 -0700 Message-Id: In-Reply-To: References: MIME-Version: 1.0 Precedence: Bulk List-Subscribe: List-Help: Sender: devel@edk2.groups.io List-Id: Mailing-List: list devel@edk2.groups.io; contact devel+owner@edk2.groups.io Reply-To: devel@edk2.groups.io,saloni.kasbekar@intel.com List-Unsubscribe-Post: List-Unsubscribe=One-Click List-Unsubscribe: X-Gm-Message-State: TRc3ufkgNrg0hvausjDHtNhux7686176AA= Content-Transfer-Encoding: 8bit X-GND-Status: LEGIT Authentication-Results: spool.mail.gandi.net; dkim=pass header.d=groups.io header.s=20140610 header.b=TCIv6WEe; dmarc=fail reason="SPF not aligned (relaxed), DKIM not aligned (relaxed)" header.from=intel.com (policy=none); spf=pass (spool.mail.gandi.net: domain of bounce@groups.io designates 66.175.222.108 as permitted sender) smtp.mailfrom=bounce@groups.io Adds the header includes for the ConfigBlocks Cc: Sai Chaganty Cc: Nate DeSimone Cc: Rosen Chuang Signed-off-by: Saloni Kasbekar --- .../CpuPcieRp/Gen3/CpuPcieConfigGen3.h | 48 ++ .../CpuPcieRp/Gen4/CpuPcieConfig.h | 240 ++++++++ .../Include/ConfigBlock/Espi/LpcConfig.h | 38 ++ .../Include/ConfigBlock/Fivr/FivrConfig.h | 183 ++++++ .../Include/ConfigBlock/Gpio/GpioDevConfig.h | 37 ++ .../Graphics/Gen12/GraphicsConfig.h | 212 +++++++ .../HostBridge/Ver1/HostBridgeConfig.h | 58 ++ .../ConfigBlock/Itss/InterruptConfig.h | 38 ++ .../ConfigBlock/Memory/Ver2/MemoryConfig.h | 551 ++++++++++++++++++ .../Include/ConfigBlock/PchDmi/PchDmiConfig.h | 65 +++ .../PcieRp/PchPcieRp/PchPcieRpConfig.h | 180 ++++++ .../Include/ConfigBlock/PcieRp/PcieConfig.h | 408 +++++++++++++ .../ConfigBlock/PcieRp/PciePreMemConfig.h | 36 ++ .../Include/ConfigBlock/Pmc/AdrConfig.h | 76 +++ .../Include/ConfigBlock/Pmc/PmConfig.h | 86 +++ .../Include/ConfigBlock/Rtc/RtcConfig.h | 37 ++ .../ConfigBlock/SerialIo/SerialIoConfig.h | 33 ++ .../Include/ConfigBlock/SiConfig.h | 105 ++++ .../Include/ConfigBlock/SiPreMemConfig.h | 63 ++ .../Include/ConfigBlock/Smbus/SmbusConfig.h | 49 ++ .../ConfigBlock/Spi/FlashProtectionConfig.h | 54 ++ .../Include/ConfigBlock/Tcss/TcssPeiConfig.h | 71 +++ .../Include/ConfigBlock/Vmd/VmdPeiConfig.h | 60 ++ .../Include/ConfigBlock/Wdt/WatchDogConfig.h | 30 + 24 files changed, 2758 insertions(+) create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h new file mode 100644 index 0000000000..5b437c8311 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h @@ -0,0 +1,48 @@ +/** @file +Pcie root port policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ + +#ifndef _CPU_PCIE_CONFIG_GEN3_H_ +#define _CPU_PCIE_CONFIG_GEN3_H_ + +#include +#include +#include +#include +#include + +#pragma pack(push, 1) + + +#define L0_SET BIT0 +#define L1_SET BIT1 + + +/// +/// SA GPIO Data Structure +/// +typedef struct { + GPIO_PAD GpioPad; ///< Offset 0: GPIO Pad + UINT8 Value; ///< Offset 4: GPIO Value + UINT8 Rsvd0[3]; ///< Offset 5: Reserved for 4 bytes alignment + UINT32 Active : 1; ///< Offset 8: 0=Active Low; 1=Active High + UINT32 RsvdBits0 : 31; +} SA_GPIO_INFO_PCIE; + +/// +/// SA Board PEG GPIO Info +/// +typedef struct { + SA_GPIO_INFO_PCIE SaPeg0ResetGpio; ///< Offset 0: PEG0 PERST# GPIO assigned, must be a PCH GPIO pin + SA_GPIO_INFO_PCIE SaPeg3ResetGpio; ///< Offset 12: PEG3 PERST# GPIO assigned, must be a PCH GPIO pin + BOOLEAN GpioSupport; ///< Offset 24: 1=Supported; 0=Not Supported + UINT8 Rsvd0[3]; ///< Offset 25: Reserved for 4 bytes alignment +} PEG_GPIO_DATA; + + +#pragma pack (pop) + +#endif // _CPU_PCIE_CONFIG_GEN3_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h new file mode 100644 index 0000000000..999748d711 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h @@ -0,0 +1,240 @@ +/** @file + Pcie root port policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ + +#ifndef _CPU_PCIE_CONFIG_H_ +#define _CPU_PCIE_CONFIG_H_ + +#include +#include +#include +#include +#include + +#pragma pack(push, 1) + +#define CPU_PCIE_RP_PREMEM_CONFIG_REVISION 1 + +/** + Making any setup structure change after code frozen + will need to maintain backward compatibility, bump up + structure revision and update below history table\n + Revision 1: - Initial version. +**/ + +#define CPU_PCIE_CONFIG_REVISION 10 + +#define L0_SET BIT0 +#define L1_SET BIT1 + +/** + CPU PCIe Root Port Pre-Memory Configuration + Contains Root Port settings and capabilities + Revision 1: - Initial version. + Revision 2: - Adding Dekel Suqelch Workaround Setup Variable + Revision 3: - Deprecate Dekel Suqelch Workaround Setup Variable + Revision 4: - Adding New FOM Setup Variable + Revision 5: - Add CdrRelock Policy to CPU_PCIE_RP_PREMEM_CONFIG. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /** + Root Port enabling mask. + Bit0 presents RP1, Bit1 presents RP2, and so on. + 0: Disable; 1: Enable. + **/ + UINT32 RpEnabledMask; + /** + Assertion on Link Down GPIOs + - Disabled (0x0) : Disable assertion on Link Down GPIOs(Default) + - Enabled (0x1) : Enable assertion on Link Down GPIOs + **/ + UINT8 LinkDownGpios; + /** + Enable ClockReq Messaging + - Disabled (0x0) : Disable ClockReq Messaging(Default) + - Enabled (0x1) : Enable ClockReq Messaging + **/ + UINT8 ClkReqMsgEnable; + /** + Dekel Recipe Workaround + 2 + 1=Minimal, 9=Maximum, + **/ + UINT8 DekelSquelchWa; // Deprecated variable + UINT8 Rsvd0[1]; + /** + Determines each PCIE Port speed capability. + 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3; 4: Gen4 (see: CPU_PCIE_SPEED) + **/ + UINT8 PcieSpeed[CPU_PCIE_MAX_ROOT_PORTS]; + + /** + Enable ClockReq Messaging Policy is for all Rootports + - Disabled (0x0) : Disable ClockReq Messaging(Default) + - Enabled (0x1) : Enable ClockReq Messaging + **/ + UINT8 ClkReqMsgEnableRp[CPU_PCIE_MAX_ROOT_PORTS]; + /** + To Enable/Disable New FOM + 0: Disable; 1: Enable + **/ + UINT8 NewFom[CPU_PCIE_MAX_ROOT_PORTS]; + /** + To Enable/Disable CDR Relock + 0: Disable; 1: Enable + **/ + UINT8 CdrRelock[CPU_PCIE_MAX_ROOT_PORTS]; +} CPU_PCIE_RP_PREMEM_CONFIG; + +/** + Represent lane specific PCIe Gen3 equalization parameters. +**/ +typedef struct { + UINT8 Cm; ///< Coefficient C-1 + UINT8 Cp; ///< Coefficient C+1 + UINT8 PegGen3RootPortPreset; ///< (Test) Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane + UINT8 PegGen3EndPointPreset; ///< (Test) Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane + UINT8 PegGen3EndPointHint; ///< (Test) Hint value per lane for the PEG Gen3 End Point. Range: 0-6, 2 is default for each lane + UINT8 PegGen4RootPortPreset; ///< (Test) Used for programming PEG Gen4 preset values per lane. Range: 0-9, 8 is default for each lane + UINT8 PegGen4EndPointPreset; ///< (Test) Used for programming PEG Gen4 preset values per lane. Range: 0-9, 7 is default for each lane + UINT8 PegGen4EndPointHint; ///< (Test) Hint value per lane for the PEG Gen4 End Point. Range: 0-6, 2 is default for each lane +} CPU_PCIE_EQ_LANE_PARAM; + +/** + The CPU_PCI_ROOT_PORT_CONFIG describe the feature and capability of each CPU PCIe root port. +**/ +typedef struct { + + UINT32 ExtSync : 1; ///< Indicate whether the extended synch is enabled. 0: Disable; 1: Enable. + UINT32 MultiVcEnabled : 1; ///< Multiple Virtual Channel. 0: Disable; 1: Enable + UINT32 RsvdBits0 : 30; ///< Reserved bits + /** + PCIe Gen4 Equalization Method + - HwEq (0x1) : Hardware Equalization (Default) + - StaticEq (0x2) : Static Equalization + **/ + UINT8 Gen4EqPh3Method; + UINT8 FomsCp; ///< FOM Score Board Control Policy + UINT8 RsvdBytes0[2]; ///< Reserved bytes + + // + // Gen3 Equalization settings + // + UINT32 Gen3Uptp : 4; ///< (Test) Upstream Port Transmitter Preset used during Gen3 Link Equalization. Used for all lanes. Default is 7. + UINT32 Gen3Dptp : 4; ///< (Test) Downstream Port Transmiter Preset used during Gen3 Link Equalization. Used for all lanes. Default is 7. + // + // Gen4 Equalization settings + // + UINT32 Gen4Uptp : 4; ///< (Test) Upstream Port Transmitter Preset used during Gen4 Link Equalization. Used for all lanes. Default is 7. + UINT32 Gen4Dptp : 4; ///< (Test) Downstream Port Transmiter Preset used during Gen4 Link Equalization. Used for all lanes. Default is 7. + // + // Gen5 Equalization settings + // + UINT32 Gen5Uptp : 4; ///< (Test) Upstream Port Transmitter Preset used during Gen5 Link Equalization. Used for all lanes. Default is 5. + UINT32 Gen5Dptp : 4; ///< (Test) Downstream Port Transmiter Preset used during Gen5 Link Equalization. Used for all lanes. Default is 7. + UINT32 RsvdBits1 : 8; ///< Reserved Bits + + PCIE_ROOT_PORT_COMMON_CONFIG PcieRpCommonConfig; ///< (Test) Includes policies which are common to both SA and PCH RootPort + +} CPU_PCIE_ROOT_PORT_CONFIG; + +typedef struct { + UINT8 PcieGen3PresetCoeffSelection; ///Revision 1< / b>: + -Initial version. + Revision 2: + - SlotSelection policy added + Revision 3 + - Deprecate PegGen3ProgramStaticEq and PegGen4ProgramStaticEq + Revision 4: + - Deprecating SetSecuredRegisterLock + Revision 5: + - Moved ClockGating policy to PCIE_ROOT_PORT_COMMON_CONFIG + - Moved PowerGating policy to PCIE_ROOT_PORT_COMMON_CONFIG + - Deprecate VcEnabled policy + Revision 7: + - Deprecating Gen3PresetCoeffSelection and Gen4PresetCoeffSelection + Revision 8: + - Added Serl policy + Revision 9: + - Align revision with CPU_PCIE_CONFIG_REVISION value + Revision 10: + - Deprecate EqPh3LaneParam.Cm and EqPh3LaneParam.Cp +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /// + /// These members describe the configuration of each SA PCIe root port. + /// + CPU_PCIE_ROOT_PORT_CONFIG RootPort[CPU_PCIE_MAX_ROOT_PORTS]; + /// + /// Gen3 Equalization settings for physical PCIe lane, index 0 represents PCIe lane 1, etc. + /// Corresponding entries are used when root port EqPh3Method is PchPcieEqStaticCoeff (default). + /// + CPU_PCIE_EQ_LANE_PARAM EqPh3LaneParam[SA_PEG_MAX_LANE]; //@ Deprecated Policy + /// + /// List of coefficients used during equalization (applicable to both software and hardware EQ) + /// + PCIE_EQ_PARAM HwEqGen4CoeffList[PCIE_HWEQ_COEFFS_MAX]; //@ Deprecated Policy + + PCIE_COMMON_CONFIG PcieCommonConfig; /// < (Test) Includes policies which are common to both SA and PCH PCIe + + UINT32 FiaProgramming : 1; /// < Skip Fia Configuration and lock if enable + // Deprecated Policy + /** + (Test) Program PEG Gen3 EQ Phase1 Static Presets + - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming + - Enabled (0x1) : Enable EQ Phase1 Static Presets Programming (Default) + **/ + UINT32 PegGen3ProgramStaticEq : 1; + + // Deprecated Policy + /** + (Test) Program PEG Gen4 EQ Phase1 Static Presets + - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming + - Enabled (0x1) : Enable EQ Phase1 Static Presets Programming (Default) + **/ + UINT32 PegGen4ProgramStaticEq : 1; + /** + (Test) Cpu Pcie Secure Register Lock + - Disabled (0x0) + - Enabled (0x1) + **/ + UINT32 SetSecuredRegisterLock : 1; // Deprecated Policy + /// + /// This member allows to select between the PCI Express M2 or CEMx4 slot 1: PCIe M2; 0: CEMx4 slot. + /// + UINT32 SlotSelection : 1; + + UINT32 Serl : 1; + + UINT32 RsvdBits0 : 26; + + /** + PCIe device override table + The PCIe device table is being used to override PCIe device ASPM settings. + This is a pointer points to a 32bit address. And it's only used in PostMem phase. + Please refer to PCIE_DEVICE_OVERRIDE structure for the table. + Last entry VendorId must be 0. + The prototype of this policy is: + PCIE_DEVICE_OVERRIDE *PcieDeviceOverrideTablePtr; + **/ + UINT32 PcieDeviceOverrideTablePtr; + CPU_PCIE_ROOT_PORT_CONFIG2 RootPort2[CPU_PCIE_MAX_ROOT_PORTS]; + PCIE_COMMON_CONFIG2 PcieCommonConfig2; + } CPU_PCIE_CONFIG; + +#pragma pack (pop) + +#endif // _CPU_PCIE_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h new file mode 100644 index 0000000000..324facde78 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h @@ -0,0 +1,38 @@ +/** @file + Lpc policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _LPC_CONFIG_H_ +#define _LPC_CONFIG_H_ + +#define PCH_LPC_PREMEM_CONFIG_REVISION 1 +extern EFI_GUID gLpcPreMemConfigGuid; + +#pragma pack (push,1) + +/** + This structure contains the policies which are related to LPC. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /** + Enhance the port 8xh decoding. + Original LPC only decodes one byte of port 80h, with this enhancement LPC can decode word or dword of port 80h-83h. + @note: this will occupy one LPC generic IO range register. While this is enabled, read from port 80h always return 0x00. + 0: Disable, 1: Enable + **/ + UINT32 EnhancePort8xhDecoding : 1; + /** + Hardware Autonomous Enable. + When enabled, LPC will automatically engage power gating when it has reached its idle condition. + 0: Disable, 1: Enable + **/ + UINT32 LpcPmHAE : 1; + UINT32 RsvdBits : 30; ///< Reserved bits +} PCH_LPC_PREMEM_CONFIG; + +#pragma pack (pop) + +#endif // _LPC_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h new file mode 100644 index 0000000000..501e00c0e1 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h @@ -0,0 +1,183 @@ +/** @file + PCH FIVR policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _FIVR_CONFIG_H_ +#define _FIVR_CONFIG_H_ + +/** + Revision 1: - Initial version. +**/ +#define PCH_FIVR_CONFIG_REVISION 1 +extern EFI_GUID gFivrConfigGuid; + +#pragma pack (push,1) + +/** + Rail support in S0ix and Sx + Settings other than FivrRailDisabled can be OR'ed +**/ +typedef enum { + FivrRailDisabled = 0, + FivrRailInS0i1S0i2 = BIT0, + FivrRailInS0i3 = BIT1, + FivrRailInS3 = BIT2, + FivrRailInS4 = BIT3, + FivrRailInS5 = BIT4, + FivrRailInS0ix = FivrRailInS0i1S0i2 | FivrRailInS0i3, + FivrRailInSx = FivrRailInS3 | FivrRailInS4 | FivrRailInS5, + FivrRailAlwaysOn = FivrRailInS0ix | FivrRailInSx +} FIVR_RAIL_SX_STATE; + +typedef enum { + FivrRetentionActive = BIT0, + FivrNormActive = BIT1, + FivrMinActive = BIT2, + FivrMinRetention = BIT3 +} FIVR_RAIL_SUPPORTED_VOLTAGE; + +/** + Structure for V1p05/Vnn VR rail configuration +**/ +typedef struct { + /** + Mask to enable the usage of external VR rail in specific S0ix or Sx states + Use values from FIVR_RAIL_SX_STATE + The default is FivrRailDisabled. + **/ + UINT32 EnabledStates : 6; + + /** + VR rail voltage value that will be used in S0i2/S0i3 states. + This value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) + The default for Vnn is set to 420 - 1050 mV. + **/ + UINT32 Voltage : 11; + /** + @deprecated + THIS POLICY IS DEPRECATED, PLEASE USE IccMaximum INSTEAD + VR rail Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 500mA + The default is 0mA . + **/ + UINT32 IccMax : 8; + /** + UINT32 Alignement + **/ + UINT32 RsvdBits1 : 7; + /** + This register holds the control hold off values to be used when + changing the rail control for external bypass value in us + **/ + UINT32 CtrlRampTmr : 8; + + /** + Mask to set the supported configuration in VR rail. + Use values from FIVR_RAIL_SUPPORTED_VOLTAGE + **/ + UINT32 SupportedVoltageStates : 4; + + /** + VR rail Icc Maximum Value + Granularity of this setting is 1mA and maximal possible value is 500mA + The default is 0mA . + **/ + UINT32 IccMaximum : 16; + /** + UINT32 Alignment + **/ + UINT32 RsvdBits2 : 4; + +} FIVR_EXT_RAIL_CONFIG; + + +/** + Structure for VCCIN_AUX voltage rail configuration +**/ +typedef struct { + /** + Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage. + Voltage transition time required by motherboard voltage regulator when PCH changes + the VCCIN_AUX regulator set point from the low current mode voltage and high current mode voltage. + This field has 1us resolution. + When value is 0 PCH will not transition VCCIN_AUX to low current mode voltage. + The default is 0xC . + **/ + UINT8 LowToHighCurModeVolTranTime; + + /** + Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage. + Voltage transition time required by motherboard voltage regulator when PCH changes + the VCCIN_AUX regulator set point from the retention mode voltage to high current mode voltage. + This field has 1us resolution. + When value is 0 PCH will not transition VCCIN_AUX to retention voltage. + The default is 0x36 . + **/ + UINT8 RetToHighCurModeVolTranTime; + + /** + Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage. + Voltage transition time required by motherboard voltage regulator when PCH changes + the VCCIN_AUX regulator set point from the retention mode voltage to low current mode voltage. + This field has 1us resolution. + When value is 0 PCH will not transition VCCIN_AUX to retention voltage. + The default is 0x2B . + **/ + UINT8 RetToLowCurModeVolTranTime; + UINT8 RsvdByte1; + /** + Transition time in microseconds from Off (0V) to High Current Mode Voltage. + Voltage transition time required by motherboard voltage regulator when PCH changes + the VCCIN_AUX regulator set point from 0V to the high current mode voltage. + This field has 1us resolution. + 0 = Transition to 0V is disabled + Setting this field to 0 sets VCCIN_AUX as a fixed rail that stays on + in all S0 & Sx power states after initial start up on G3 exit + The default is 0x96 . + **/ + UINT32 OffToHighCurModeVolTranTime : 11; + UINT32 RsvdBits1 : 21; +} FIVR_VCCIN_AUX_CONFIG; + +/** + The PCH_FIVR_CONFIG block describes FIVR settings. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /** + External V1P05 VR rail configuration. + **/ + FIVR_EXT_RAIL_CONFIG ExtV1p05Rail; + /** + External Vnn VR rail configuration. + **/ + FIVR_EXT_RAIL_CONFIG ExtVnnRail; + /** + Additional External Vnn VR rail configuration that will get applied + in Sx entry SMI callback. Required only if External Vnn VR + needs different settings for Sx than those specified in ExtVnnRail. + **/ + FIVR_EXT_RAIL_CONFIG ExtVnnRailSx; + /** + VCCIN_AUX voltage rail configuration. + **/ + FIVR_VCCIN_AUX_CONFIG VccinAux; + + /** + Enable/Disable FIVR Dynamic Power Management + Default is 1 . + **/ + UINT32 FivrDynPm : 1; + /** + Enable/Disable Bypass of FIVR configuration + Default is 0 . + **/ + UINT32 BypassFivrConfig : 1; + UINT32 RsvdBits2 : 30; +} PCH_FIVR_CONFIG; + +#pragma pack (pop) + +#endif // _FIVR_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h new file mode 100644 index 0000000000..5652df0259 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h @@ -0,0 +1,37 @@ +/** @file + GPIO device policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _GPIO_DEV_CONFIG_H_ +#define _GPIO_DEV_CONFIG_H_ + +extern EFI_GUID gGpioDxeConfigGuid; + +#define GPIO_DXE_CONFIG_REVISION 1 + +#pragma pack (push,1) + +/** + This structure contains the DXE policies which are related to GPIO device. + + Revision 1: + - Inital version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /** + If GPIO ACPI device is not used by OS it can be hidden. In such case + no other device exposed to the system can reference GPIO device in one + of its resources through GpioIo(..) or GpioInt(..) ACPI descriptors. + 0: Disable; 1: Enable + **/ + UINT32 HideGpioAcpiDevice : 1; + UINT32 RsvdBits : 31; ///< Reserved bits + +} GPIO_DXE_CONFIG; + +#pragma pack (pop) + +#endif // _GPIO_DEV_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h new file mode 100644 index 0000000000..c6a2f36612 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h @@ -0,0 +1,212 @@ +/** @file + Policy definition for Internal Graphics Config Block. + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _GRAPHICS_CONFIG_H_ +#define _GRAPHICS_CONFIG_H_ +#pragma pack(push, 1) + +#define GRAPHICS_DXE_CONFIG_REVISION 2 + +#define MAX_BCLM_ENTRIES 20 + + +// +// DDI defines +// +typedef enum { + DdiDisable = 0x00, + DdiDdcEnable = 0x01, +} DDI_DDC_TBT_VAL; + +typedef enum { + DdiHpdDisable = 0x00, + DdiHpdEnable = 0x01, +} DDI_HPD_VAL; + +typedef enum { + DdiPortDisabled = 0x00, + DdiPortEdp = 0x01, + DdiPortMipiDsi = 0x02, +} DDI_PORT_SETTINGS; + +/** + This structure configures the Native GPIOs for DDI port per VBT settings. +**/ +typedef struct { + UINT8 DdiPortAConfig; /// The Configuration of DDI port A, this settings must match VBT's settings. DdiPortDisabled - No LFP is connected on DdiPortA, DdiPortEdp - Set DdiPortA to eDP, DdiPortMipiDsi - Set DdiPortA to MIPI DSI + UINT8 DdiPortBConfig; /// The Configuration of DDI port B, this settings must match VBT's settings. DdiPortDisabled - No LFP is connected on DdiPortB, DdiPortEdp - Set DdiPortB to eDP, DdiPortMipiDsi - Set DdiPortB to MIPI DSI + UINT8 DdiPortAHpd; /// The HPD setting of DDI Port A, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, DdiHpdEnable - Enable HPD + UINT8 DdiPortBHpd; /// The HPD setting of DDI Port B, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, DdiHpdEnable - Enable HPD + UINT8 DdiPortCHpd; /// The HPD setting of DDI Port C, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, DdiHpdEnable - Enable HPD + UINT8 DdiPort1Hpd; /// The HPD setting of DDI Port 1, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, DdiHpdEnable - Enable HPD + UINT8 DdiPort2Hpd; /// The HPD setting of DDI Port 2, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, DdiHpdEnable - Enable HPD + UINT8 DdiPort3Hpd; /// The HPD setting of DDI Port 3, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, DdiHpdEnable - Enable HPD + UINT8 DdiPort4Hpd; /// The HPD setting of DDI Port 4, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, DdiHpdEnable - Enable HPD + UINT8 DdiPortADdc; /// The DDC setting of DDI Port A, this settings must match VBT's settings. DdiDisable - Disable DDC, DdiDdcEnable - Enable DDC + UINT8 DdiPortBDdc; /// The DDC setting of DDI Port B, this settings must match VBT's settings. DdiDisable - Disable DDC, DdiDdcEnable - Enable DDC + UINT8 DdiPortCDdc; /// The DDC setting of DDI Port C, this settings must match VBT's settings. DdiDisable - Disable DDC, DdiDdcEnable - Enable DDC + UINT8 DdiPort1Ddc; /// The DDC setting of DDI Port 1, this settings must match VBT's settings. DdiDisable - Disable DDC, DdiDdcEnable - Enable DDC + UINT8 DdiPort2Ddc; /// The DDC setting of DDI Port 2, this settings must match VBT's settings. DdiDisable - Disable DDC, DdiDdcEnable - Enable DDC + UINT8 DdiPort3Ddc; /// The DDC setting of DDI Port 3, this settings must match VBT's settings. DdiDisable - Disable DDC, DdiDdcEnable - Enable DDC + UINT8 DdiPort4Ddc; /// The DDC setting of DDI Port 4, this settings must match VBT's settings. DdiDisable - Disable DDC, DdiDdcEnable - Enable DDC +} DDI_CONFIGURATION; + +/** + This Configuration block is to configure GT related PreMem data/variables.\n + Revision 1: + - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header + /** + Offset 28 + Selection of the primary display device: 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3=AUTO, 4=Switchable Graphics\n + When AUTO mode selected, the priority of display devices is: PCIe Graphics on PCH > PEG > iGFX + **/ + UINT8 PrimaryDisplay; + /** + Offset 29 + Intel Gfx Support. It controls enabling/disabling iGfx device. + When AUTO mode selected, iGFX will be turned off when external graphics detected. + If FALSE, all other polices can be ignored. + 2 = AUTO; + 0 = FALSE; + 1 = TRUE. + **/ + UINT8 InternalGraphics; + /** + Offset 30 + Pre-allocated memory for iGFX\n + 0 = 0MB,1 or 247 = 32MB,\n + 2 = 64MB,\n + 240 = 4MB, 241 = 8MB,\n + 242 = 12MB, 243 = 16MB,\n + 244 = 20MB, 245 = 24MB,\n + 246 = 28MB, 248 = 36MB,\n + 249 = 40MB, 250 = 44MB,\n + 251 = 48MB, 252 = 52MB,\n + 253 = 56MB, 254 = 60MB,\n + Note: enlarging pre-allocated memory for iGFX may need to reduce MmioSize because of 4GB boundary limitation + **/ + UINT16 IgdDvmt50PreAlloc; + UINT8 PanelPowerEnable; ///< Offset 32 :(Test) Control for enabling/disabling VDD force bit (Required only for early enabling of eDP panel): 0=FALSE, 1=TRUE + UINT8 ApertureSize; ///< Offset 33 :Graphics aperture size (256MB is the recommended size as per BWG) : 0=128MB, 1=256MB, 3=512MB, 7=1024MB, 15=2048MB. + UINT8 GtPsmiSupport; ///< Offset 34 :PSMI support On/Off: 0=FALSE, 1=TRUE + UINT8 PsmiRegionSize; ///< Offset 35 :Psmi region size: 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1056MB + UINT8 DismSize; ///< Offset 36 :DiSM Size for 2LM Sku: 0=0GB, 1=1GB, 2=2GB, 3=3GB, 4=4GB, 5=5GB, 6=6GB, 7=7GB + UINT8 DfdRestoreEnable; ///< Offset 37 :(Deprecated) Display memory map programming for DFD Restore 0- Disable, 1- Enable + UINT16 GttSize; ///< Offset 38 :Selection of iGFX GTT Memory size: 1=2MB, 2=4MB, 3=8MB + /** + Offset 40 + Temp Address of System Agent GTTMMADR: Default is 0xAF000000 + **/ + UINT32 GttMmAdr; + UINT32 GmAdr; ///< Offset 44 Obsolete not to be used, use GmAdr64 + DDI_CONFIGURATION DdiConfiguration; ///< Offset 48 DDI configuration, need to match with VBT settings. + + UINT8 GtClosEnable; ///< Offset 50 Gt ClOS + UINT8 Rsvd0[7]; ///< Offset 51 Reserved for 4 bytes of alignment + /** + Offset 58 + Temp Address of System Agent GMADR: Default is 0xB0000000 + **/ + UINT64 GmAdr64; + UINT16 DeltaT12PowerCycleDelay; ///< Offset 66 Power Cycle Delay required for eDP as per VESA standard.0 - 0 ms, 0xFFFF - Auto calculate to max 500 ms<\b> + UINT8 DisplayAudioLink; ///< Offset 68 Enable/Disable Display Audio Links in Pre-OS.0- Disable, 1- Enable + UINT8 OemT12DelayOverride; ///< Offset 69 :Oem T12 Delay Override Disable<\b>,Enable-Enable T12 Time. + UINT8 Rsvd2[4]; ///< Offset 70 Reserved for 4 bytes of alignment +} GRAPHICS_PEI_PREMEM_CONFIG; + +/** + This configuration block is to configure IGD related variables used in PostMem PEI. + If Intel Gfx Device is not supported, all policies can be ignored. + Revision 1: + - Initial version. + Revision 2: + - Removed DfdRestoreEnable. + Revision 3: + - Removed DdiConfiguration. + Revision 4: + - Added new CdClock frequency + Revision 5: + - Added GT Chicket bits + Revision 6: + - Added LogoPixelHeight and LogoPixelWidth + Revision 7: + - Added SkipFspGop + Revision 8: + - Added VerticalResolution and HorizontalResolution + +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header + UINT8 RenderStandby; ///< Offset 28 :(Test) This field is used to enable or disable RC6 (Render Standby): 0=FALSE, 1=TRUE + UINT8 PmSupport; ///< Offset 29 :(Test) Configure GT to use along with PM Support TRUE/FALSE: 0=FALSE, 1=TRUE + /** + Offset 30 + CdClock Frequency select\n + 0xFF = Auto. Max CdClock freq based on Reference Clk \n + 0: 192 Mhz, 1: 307.2 Mhz, 2: 312 Mhz, 3: 324 Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz + + **/ + UINT16 CdClock; + UINT8 PeiGraphicsPeimInit; ///< Offset 32 : This policy is used to enable/disable Intel Gfx PEIM.0- Disable, 1- Enable + UINT8 CdynmaxClampEnable; ///< Offset 33 : This policy is used to enable/disable CDynmax Clamping Feature (CCF) 1- Enable, 0- Disable + UINT16 GtFreqMax; ///< Offset 34 : (Test) Max GT frequency limited by user in multiples of 50MHz: Default value which indicates normal frequency is 0xFF + UINT8 DisableTurboGt; ///< Offset 36 : This policy is used to enable/disable DisableTurboGt 0- Disable, 1- Enable + UINT8 SkipCdClockInit; ///< Offset 37 : SKip full CD clock initialization. 0- Disable, 1- Enable + UINT8 RC1pFreqEnable; ///< Offset 38 : This policy is used to enable/disable RC1p Frequency. 0- Disable, 1- Enable + UINT8 PavpEnable; ///< Offset 39 :IGD PAVP TRUE/FALSE: 0=FALSE, 1=TRUE + VOID* LogoPtr; ///< Offset 40 Address of Intel Gfx PEIM Logo to be displayed + UINT32 LogoSize; ///< Offset 44 Intel Gfx PEIM Logo Size + VOID* GraphicsConfigPtr; ///< Offset 48 Address of the Graphics Configuration Table + VOID* BltBufferAddress; ///< Offset 52 Address of Blt buffer for PEIM Logo use + UINT32 BltBufferSize; ///< Offset 56 The size for Blt Buffer, calculating by PixelWidth * PixelHeight * 4 bytes (the size of EFI_GRAPHICS_OUTPUT_BLT_PIXEL) + UINT8 ProgramGtChickenBits; ///< Offset 60 Program GT Chicket bits in GTTMMADR + 0xD00 BITS [3:1]. + UINT8 SkipFspGop; ///< Offset 61 This policy is used to skip PEIM GOP in FSP.0- Use FSP provided GOP driver, 1- Skip FSP provided GOP driver + UINT8 Rsvd1[2]; ///< Offset 62 Reserved for 4 bytes alignment + UINT32 LogoPixelHeight; ///< Offset 64 Address of LogoPixelHeight for PEIM Logo use + UINT32 LogoPixelWidth; ///< Offset 68 Address of LogoPixelWidth for PEIM Logo use + UINT32 VerticalResolution; ///< Offset 72 Address of VerticalResolution for PEIM Logo use + UINT32 HorizontalResolution; ///< Offset 76 Address of HorizontalResolution for PEIM Logo use +} GRAPHICS_PEI_CONFIG; + +/** + This configuration block is to configure IGD related variables used in DXE. + If Intel Gfx Device is not supported or disabled, all policies will be ignored. + The data elements should be initialized by a Platform Module.\n + Revision 1: + - Initial version. + Revision 2: + - Removed IgdDvmtMemSize. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27: Config Block Header + UINT32 Size; ///< Offset 28 - 31: This field gives the size of the GOP VBT Data buffer + EFI_PHYSICAL_ADDRESS VbtAddress; ///< Offset 32 - 39: This field points to the GOP VBT data buffer + UINT8 PlatformConfig; ///< Offset 40: This field gives the Platform Configuration Information (0=Platform is S0ix Capable for ULT SKUs only, 1=Platform is not S0ix Capable, 2=Force Platform is S0ix Capable for All SKUs) + UINT8 AlsEnable; ///< Offset 41: Ambient Light Sensor Enable: 0=Disable, 2=Enable + UINT8 BacklightControlSupport; ///< Offset 42: Backlight Control Support: 0=PWM Inverted, 2=PWM Normal + UINT8 IgdBootType; ///< Offset 43: IGD Boot Type CMOS option: 0=Default, 0x01=CRT, 0x04=EFP, 0x08=LFP, 0x20=EFP3, 0x40=EFP2, 0x80=LFP2 + UINT32 IuerStatusVal; ///< Offset 44 - 47: Offset 16 This field holds the current status of all the supported Ultrabook events (Intel(R) Ultrabook Event Status bits) + CHAR16 GopVersion[0x10]; ///< Offset 48 - 79:This field holds the GOP Driver Version. It is an Output Protocol and updated by the Silicon code + /** + Offset 80: IGD Panel Type CMOS option\n + 0=Default, 1=640X480LVDS, 2=800X600LVDS, 3=1024X768LVDS, 4=1280X1024LVDS, 5=1400X1050LVDS1\n + 6=1400X1050LVDS2, 7=1600X1200LVDS, 8=1280X768LVDS, 9=1680X1050LVDS, 10=1920X1200LVDS, 13=1600X900LVDS\n + 14=1280X800LVDS, 15=1280X600LVDS, 16=2048X1536LVDS, 17=1366X768LVDS + **/ + UINT8 IgdPanelType; + UINT8 IgdPanelScaling; ///< Offset 81: IGD Panel Scaling: 0=AUTO, 1=OFF, 6=Force scaling + UINT8 IgdBlcConfig; ///< Offset 82: Backlight Control Support: 0=PWM Inverted, 2=PWM Normal + UINT8 IgdDvmtMemSize; ///< Offset 83: @deprecated IGD DVMT Memory Size: 1=128MB, 2=256MB, 3=MAX + UINT8 GfxTurboIMON; ///< Offset 84: IMON Current Value: 14=Minimal, 31=Maximum + UINT8 Reserved[3]; ///< Offset 85: Reserved for DWORD alignment. + UINT16 BCLM[MAX_BCLM_ENTRIES]; ///< Offset 88: IGD Backlight Brightness Level Duty cycle Mapping Table. +} GRAPHICS_DXE_CONFIG; +#pragma pack(pop) + +#endif // _GRAPHICS_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h new file mode 100644 index 0000000000..11ef7b119c --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h @@ -0,0 +1,58 @@ +/** @file + Configurations for HostBridge + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _HOST_BRIDGE_CONFIG_H_ +#define _HOST_BRIDGE_CONFIG_H_ + +#include + + +extern EFI_GUID gHostBridgePeiPreMemConfigGuid; +extern EFI_GUID gHostBridgePeiConfigGuid; + +#pragma pack (push,1) + +/** + This configuration block describes HostBridge settings in PreMem.\n + Revision 1: + - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header + UINT32 MchBar; ///< Offset 28 Address of System Agent MCHBAR: 0xFEDC0000(TGL)/0xFEA80000(JSL) + UINT32 DmiBar; ///< Offset 32 Address of System Agent DMIBAR: 0xFEDA0000 + UINT32 EpBar; ///< Offset 36 Address of System Agent EPBAR: 0xFEDA1000 + UINT32 GdxcBar; ///< Offset 40 Address of System Agent GDXCBAR: 0xFED84000 + UINT32 RegBar; ///< Offset 44 Address of System Agent REGBAR: 0xFB000000 + UINT32 EdramBar; ///< Offset 48 Address of System Agent EDRAMBAR: 0xFED80000 + /** + Offset 52 : + Size of reserved MMIO space for PCI devices\n + 0=AUTO, 512=512MB, 768=768MB, 1024=1024MB, 1280=1280MB, 1536=1536MB, 1792=1792MB, + 2048=2048MB, 2304=2304MB, 2560=2560MB, 2816=2816MB, 3072=3072MB\n + When AUTO mode selected, the MMIO size will be calculated by required MMIO size from PCIe devices detected. + **/ + UINT32 MmioSize; + UINT32 MmioSizeAdjustment; ///< Offset 56 Increase (given positive value) or Decrease (given negative value) the Reserved MMIO size when Dynamic Tolud/AUTO mode enabled (in MBs): 0=no adjustment + UINT8 EnableAbove4GBMmio; ///< Offset 60 Enable/disable above 4GB MMIO resource support: 0=Disable, 1=Enable + UINT8 Reserved[3]; ///< Offset 61 Reserved for future use. +} HOST_BRIDGE_PREMEM_CONFIG; + + +/** + This configuration block describes HostBridge settings in Post-Mem.\n + Revision 1: + - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header + UINT8 SkipPamLock; ///< Offset 28 :To skip PAM register locking. @note It is still recommended to set PCI Config space B0: D0: F0: Offset 80h[0]=1 in platform code even Silicon code skipped this.\n 0=All PAM registers will be locked in Silicon code, 1=Skip lock PAM registers in Silicon code. + UINT8 Reserved[3]; ///< Offset 29 Reserved for future use. +} HOST_BRIDGE_PEI_CONFIG; + +#pragma pack (pop) + +#endif diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h new file mode 100644 index 0000000000..926c7ab6ab --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h @@ -0,0 +1,38 @@ +/** @file + Interrupt policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _INTERRUPT_CONFIG_H_ +#define _INTERRUPT_CONFIG_H_ + +extern EFI_GUID gInterruptConfigGuid; + +#pragma pack (push,1) + +// +// --------------------- Interrupts Config ------------------------------ +// +typedef enum { + PchNoInt, ///< No Interrupt Pin + PchIntA, + PchIntB, + PchIntC, + PchIntD +} PCH_INT_PIN; + +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} PCH_DEVICE_INTERRUPT_CONFIG; + + +#pragma pack (pop) + +#endif // _INTERRUPT_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h new file mode 100644 index 0000000000..2be85da5a8 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h @@ -0,0 +1,551 @@ +/** @file + Policy definition of Memory Config Block + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _MEMORY_CONFIG_H_ +#define _MEMORY_CONFIG_H_ + + +#pragma pack(push, 1) + +// MEMORY_CONFIGURATION_REVISION: +// 3 - Adds DDR5 PDA Enumeration training +// 4 - Adds LPDDR4 Command Mirroring +// 5 - Adds PprEnableType +// 6 - Removed IbeccParity +// 7 - Adds MarginLimitCheck training within MEMORY_CONFIGURATION +// 8 - Adds LpddrRttCa, LpddrRttWr +// 9 - Adds VddqVoltage, VppVoltage +// 10 - Changes PprEnableType to PprEnable +// 11 - Changes DisableDimmChannel to DisableChannel +// 12 - Added DIMMDFE +// 13 - Added ExtendedBankHashing +// 14 - Added IBECC Error Injection knobs: IbeccErrInjControl, IbeccErrInjAddress, IbeccErrInjMask, IbeccErrInjCount +// 15 - Added DynamicMemoryBoost +// 16 - Added ReuseAdlDdr5Board +// 17 - Added RefreshWm; Deprecated RefreshPanicWm and RefreshHpWm +// 18 - Added DebugValue +// 19 - Added McRefreshRate; Deprecated McRefresh2X +// 20 - Added RealtimeMemoryFrequency +// 21 - Added PeriodicDcc and LpMode +// 22 - Added Tx Dqs Dcc Training +// 23 - Added tRFCpb, tRFC2, tRFC4, tRRD_L, tRRD_S, tWTR_L, tCCD_L, tWTR_S +// 24 - Added EccErrInjAddress, EccErrInjMask, EccErrInjCount +// 25 - Added FreqLimitMixedConfig, FirstDimmBitMask, UserBd +// 26 - Added SagvSwitchFactorIA/GT/IO/Stall, SagvHeuristicsDownControl, SagvHeuristicsUpControl +// 27 - Added DRAMDCA +// 28 - Added FreqLimitMixedConfig_1R1R_8GB, FreqLimitMixedConfig_1R1R_16GB, FreqLimitMixedConfig_1R1R_8GB_16GB, FreqLimitMixedConfig_2R2R +// 29 - Added LctCmdEyeWidth +// 30 - Added FirstDimmBitMaskEcc +// 31 - Added Lp5BankMode +// 32 - Added WRDS +// 33 - Added EARLYDIMMDFE for Early DIMM DFE Training +// 34 - Added OverloadSAM +#define MEMORY_CONFIGURATION_REVISION 34 + +// MEMORY_CONFIG_NO_CRC_REVISION: +// 3 - adds DDR5 SetMemoryPmicVoltage in SA_FUNCTION_CALLS +#define MEMORY_CONFIG_NO_CRC_REVISION 3 + +/// +/// MEMORY_CONFIGURATION interface definitions +/// +#define MRC_MAX_RCOMP_TARGETS 5 +/// +/// Memory SubSystem Definitions +/// +#define MEM_CFG_MAX_CONTROLLERS 2 +#define MEM_CFG_MAX_CHANNELS 4 +#define MEM_CFG_MAX_DIMMS 2 +#define MEM_CFG_NUM_BYTES_MAPPED 2 +#define MEM_CFG_MAX_SPD_SIZE 1024 +#define MEM_CFG_MAX_SOCKETS (MEM_CFG_MAX_CONTROLLERS * MEM_CFG_MAX_CHANNELS * MEM_CFG_MAX_DIMMS) +#ifndef MEM_MAX_SAGV_POINTS +#define MEM_MAX_SAGV_POINTS 4 +#endif +#define MEM_MAX_IBECC_REGIONS 8 + +/// +/// SA SPD profile selections. +/// +typedef enum { + DEFAULT_SPD, ///< Standard DIMM profile select. + CUSTOM_PROFILE, ///< XMP enthusiast settings: User specifies various override values + XMP_PROFILE_1, ///< XMP enthusiast settings: XMP profile #1 + XMP_PROFILE_2, ///< XMP enthusiast settings: XMP profile #2 + XMP_PROFILE_3, ///< XMP enthusiast settings: XMP profile #3 + XMP_USER_PROFILE_4, ///< XMP enthusiast settings: XMP user profile #4 + XMP_USER_PROFILE_5, ///< XMP enthusiast settings: XMP user profile #5 + SPDProfileMax = 0xFF ///< Ensures SA_SPD is UINT8 +} SA_SPD; + +/// +/// Define the boot modes used by the SPD read function. +/// +typedef enum { + SpdCold, ///< Cold boot + SpdWarm, ///< Warm boot + SpdS3, ///< S3 resume + SpdFast, ///< Fast boot + SpdBootModeMax ///< Delimiter +} SPD_BOOT_MODE; + +/** + SPD Data Buffer +**/ +typedef struct { + UINT8 SpdData[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_MAX_DIMMS][MEM_CFG_MAX_SPD_SIZE]; ///< SpdData +//Next Field Offset 2048 +} SPD_DATA_BUFFER; + +/** + DqDqs Mapping +**/ +typedef struct { + UINT8 DqsMapCpu2Dram[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_NUM_BYTES_MAPPED]; ///< DqsMapCpu2Dram + UINT8 DqMapCpu2Dram[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_NUM_BYTES_MAPPED][8]; ///< DqMapCpu2Dram +//Next Field Offset 16 +} SA_MEMORY_DQDQS_MAPPING; + +/** + Rcomp Policies +**/ +typedef struct { + UINT16 RcompResistor; ///< Offset 0: Reference RCOMP resistors on motherboard ~ 100 ohms + UINT16 RcompTarget[MRC_MAX_RCOMP_TARGETS]; ///< Offset 1: RCOMP target values for DqOdt, DqDrv, CmdDrv, CtlDrv, ClkDrv +//Next Field Offset 16 +} SA_MEMORY_RCOMP; + +/** + SPD Offset Table +**/ +typedef struct { + UINT16 Start; ///< Offset 0 + UINT16 End; ///< Offset 2 + UINT8 BootMode; ///< Offset 4 + UINT8 Reserved3[3]; ///< Offset 5 Reserved for future use +} SPD_OFFSET_TABLE; + +/// +/// SA memory address decode. +/// +typedef struct +{ + UINT8 Controller; ///< Offset 0 Zero based Controller number + UINT8 Channel; ///< Offset 1 Zero based Channel number + UINT8 Dimm; ///< Offset 2 Zero based DIMM number + UINT8 Rank; ///< Offset 3 Zero based Rank number + UINT8 BankGroup; ///< Offset 4 Zero based Bank Group number + UINT8 Bank; ///< Offset 5 Zero based Bank number + UINT16 Cas; ///< Offset 6 Zero based CAS number + UINT32 Ras; ///< Offset 8 Zero based RAS number +} SA_ADDRESS_DECODE; + +typedef UINT8 (EFIAPI * SA_IO_READ_8) (UINTN IoAddress); ///< CPU I/O port 8-bit read. +typedef UINT16 (EFIAPI * SA_IO_READ_16) (UINTN IoAddress); ///< CPU I/O port 16-bit read. +typedef UINT32 (EFIAPI * SA_IO_READ_32) (UINTN IoAddress); ///< CPU I/O port 32-bit read. +typedef UINT8 (EFIAPI * SA_IO_WRITE_8) (UINTN IoAddress, UINT8 Value); ///< CPU I/O port 8-bit write. +typedef UINT16 (EFIAPI * SA_IO_WRITE_16) (UINTN IoAddress, UINT16 Value); ///< CPU I/O port 16-bit write. +typedef UINT32 (EFIAPI * SA_IO_WRITE_32) (UINTN IoAddress, UINT32 Value); ///< CPU I/O port 32-bit write. +typedef UINT8 (EFIAPI * SA_MMIO_READ_8) (UINTN Address); ///< Memory Mapped I/O port 8-bit read. +typedef UINT16 (EFIAPI * SA_MMIO_READ_16) (UINTN Address); ///< Memory Mapped I/O port 16-bit read. +typedef UINT32 (EFIAPI * SA_MMIO_READ_32) (UINTN Address); ///< Memory Mapped I/O port 32-bit read. +typedef UINT64 (EFIAPI * SA_MMIO_READ_64) (UINTN Address); ///< Memory Mapped I/O port 64-bit read. +typedef UINT8 (EFIAPI * SA_MMIO_WRITE_8) (UINTN Address, UINT8 Value); ///< Memory Mapped I/O port 8-bit write. +typedef UINT16 (EFIAPI * SA_MMIO_WRITE_16) (UINTN Address, UINT16 Value); ///< Memory Mapped I/O port 16-bit write. +typedef UINT32 (EFIAPI * SA_MMIO_WRITE_32) (UINTN Address, UINT32 Value); ///< Memory Mapped I/O port 32-bit write. +typedef UINT64 (EFIAPI * SA_MMIO_WRITE_64) (UINTN Address, UINT64 Value); ///< Memory Mapped I/O port 64-bit write. +typedef UINT8 (EFIAPI * SA_SMBUS_READ_8) (UINTN Address, RETURN_STATUS *Status); ///< Smbus 8-bit read. +typedef UINT16 (EFIAPI * SA_SMBUS_READ_16) (UINTN Address, RETURN_STATUS *Status); ///< Smbus 16-bit read. +typedef UINT8 (EFIAPI * SA_SMBUS_WRITE_8) (UINTN Address, UINT8 Value, RETURN_STATUS *Status); ///< Smbus 8-bit write. +typedef UINT16 (EFIAPI * SA_SMBUS_WRITE_16) (UINTN Address, UINT16 Value, RETURN_STATUS *Status); ///< Smbus 16-bit write. +typedef UINT32 (EFIAPI * SA_GET_PCI_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset); ///< Get PCI device address. +typedef UINT32 (EFIAPI * SA_GET_PCIE_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset); ///< Get PCI express device address. +typedef VOID (EFIAPI * SA_GET_RTC_TIME) (UINT8 *Second, UINT8 *Minute, UINT8 *Hour, UINT8 *Day, UINT8 *Month, UINT16 *Year); ///< Get the current time value. +typedef UINT64 (EFIAPI * SA_GET_CPU_TIME) (VOID); ///< The current CPU time in milliseconds. +typedef VOID * (EFIAPI * SA_MEMORY_COPY) (VOID *Destination, CONST VOID *Source, UINTN NumBytes); ///< Perform byte copy operation. +typedef VOID * (EFIAPI * SA_MEMORY_SET_BYTE) (VOID *Buffer, UINTN NumBytes, UINT8 Value); ///< Perform byte initialization operation. +typedef VOID * (EFIAPI * SA_MEMORY_SET_WORD) (VOID *Buffer, UINTN NumWords, UINT16 Value); ///< Perform word initialization operation. +typedef VOID * (EFIAPI * SA_MEMORY_SET_DWORD) (VOID *Buffer, UINTN NumDwords, UINT32 Value); ///< Perform dword initialization operation. +typedef UINT64 (EFIAPI * SA_LEFT_SHIFT_64) (UINT64 Data, UINTN NumBits); ///< Left shift the 64-bit data value by specified number of bits. +typedef UINT64 (EFIAPI * SA_RIGHT_SHIFT_64) (UINT64 Data, UINTN NumBits); ///< Right shift the 64-bit data value by specified number of bits. +typedef UINT64 (EFIAPI * SA_MULT_U64_U32) (UINT64 Multiplicand, UINT32 Multiplier); ///< Multiply a 64-bit data value by a 32-bit data value. +typedef UINT64 (EFIAPI * SA_DIV_U64_U64) (UINT64 Dividend, UINT64 Divisor, UINT64 *Remainder); ///< Divide a 64-bit data value by a 64-bit data value. +typedef BOOLEAN (EFIAPI * SA_GET_SPD_DATA) (SPD_BOOT_MODE BootMode, UINT8 SpdAddress, UINT8 *Buffer, UINT8 *Ddr3Table, UINT32 Ddr3TableSize, UINT8 *Ddr4Table, UINT32 Ddr4TableSize, UINT8 *LpddrTable, UINT32 LpddrTableSize); ///< Read the SPD data over the SMBus, at the given SmBus SPD address and copy the data to the data structure. +typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_DECODE) (UINT64 Address, SA_ADDRESS_DECODE *DramAddress); +typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_ENCODE) (SA_ADDRESS_DECODE *DramAddress, UINT64 Address); +typedef BOOLEAN (EFIAPI * SA_GET_RANDOM_NUMBER) (UINT32 *Rand); ///< Get the next random 32-bit number. +typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_READ) (UINT32 Type, UINT32 Command, UINT32 *Value, UINT32 *Status); ///< Perform a CPU mailbox read. +typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_WRITE) (UINT32 Type, UINT32 Command, UINT32 Value, UINT32 *Status); ///< Perform a CPU mailbox write. +typedef UINT32 (EFIAPI * SA_GET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd); ///< Get the current memory voltage (VDD). +typedef UINT32 (EFIAPI * SA_SET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd, UINT32 Value); ///< Set the memory voltage (VDD) to the given value. +typedef UINT32 (EFIAPI * SA_SET_MEMORY_PMIC_VOLTAGE) (VOID *GlobalData, UINT8 SpdAddress, UINT32 Vdd, UINT32 Vddq, UINT32 Vpp); ///< Set DDR5 memory voltages (VDD, VDDQ, VPP) to the given values. +typedef UINT32 (EFIAPI * SA_CHECKPOINT) (VOID *GlobalData, UINT32 CheckPoint, VOID *Scratch); ///< Check point that is called at various points in the MRC. +typedef VOID (EFIAPI * SA_DEBUG_HOOK) (VOID *GlobalData, UINT16 DisplayDebugNumber); ///< Typically used to display to the I/O port 80h. +typedef UINT8 (EFIAPI * SA_CHANNEL_EXIST) (VOID *Outputs, UINT8 Channel); ///< Returns whether Channel is or is not present. +typedef INT32 (EFIAPI * SA_PRINTF) (VOID *Debug, UINT32 Level, char *Format, ...); ///< Print to output stream/device. +typedef VOID (EFIAPI * SA_DEBUG_PRINT) (VOID *String); ///< Output a string to the debug stream/device. +typedef UINT32 (EFIAPI * SA_CHANGE_MARGIN) (VOID *GlobalData, UINT8 Param, INT32 Value0, INT32 Value1, UINT8 EnMultiCast, UINT8 Channel, UINT8 RankIn, UINT8 Byte, UINT8 BitIn, UINT8 UpdateMrcData, UINT8 SkipWait, UINT32 RegFileParam); ///< Change the margin. +typedef UINT8 (EFIAPI * SA_SIGN_EXTEND) (UINT8 Value, UINT8 OldMsb, UINT8 NewMsb); ///< Sign extends OldMSB to NewMSB Bits (Eg: Bit 6 to Bit 7). +typedef VOID (EFIAPI * SA_SHIFT_PI_COMMAND_TRAIN) (VOID *GlobalData, UINT8 Channel, UINT8 Iteration, UINT8 RankMask, UINT8 GroupMask, INT32 NewValue, UINT8 UpdateHost); ///< Move CMD/CTL/CLK/CKE PIs during training. +typedef VOID (EFIAPI * SA_UPDATE_VREF) (VOID *GlobalData, UINT8 Channel, UINT8 RankMask, UINT16 DeviceMask, UINT8 VrefType, INT32 Offset, BOOLEAN UpdateMrcData, BOOLEAN PDAmode, BOOLEAN SkipWait); ///< Update the Vref value and wait until it is stable. +typedef UINT8 (EFIAPI * SA_GET_RTC_CMOS) (UINT8 Location); ///< Get the current value of the specified RTC CMOS location. +typedef UINT64 (EFIAPI * SA_MSR_READ_64) (UINT32 Location); ///< Get the current value of the specified MSR location. +typedef UINT64 (EFIAPI * SA_MSR_WRITE_64) (UINT32 Location, UINT64 Data); ///< Set the current value of the specified MSR location. +typedef VOID (EFIAPI * SA_MRC_RETURN_FROM_SMC) (VOID *GlobalData, UINT32 MrcStatus); ///< Hook function after returning from MrcStartMemoryConfiguration() +typedef VOID (EFIAPI * SA_MRC_DRAM_RESET) (UINT32 PciEBaseAddress, UINT32 ResetValue); ///< Assert or deassert DRAM_RESET# pin; this is used in JEDEC Reset. +typedef VOID (EFIAPI * SA_DELAY_NS) (VOID *GlobalData, UINT32 DelayNs); ///< Delay (stall) for the given amount of nanoseconds. +typedef VOID (EFIAPI * SA_SET_LOCK_PRMRR) (UINT64 PrmrrBaseAddress, UINT32 PrmrrSize); + + +/// +/// Function calls into the SA. +/// +typedef struct { + SA_IO_READ_8 IoRead8; ///< Offset 0: - CPU I/O port 8-bit read. + SA_IO_READ_16 IoRead16; ///< Offset 4: - CPU I/O port 16-bit read. + SA_IO_READ_32 IoRead32; ///< Offset 8: - CPU I/O port 32-bit read. + SA_IO_WRITE_8 IoWrite8; ///< Offset 12: - CPU I/O port 8-bit write. + SA_IO_WRITE_16 IoWrite16; ///< Offset 16: - CPU I/O port 16-bit write. + SA_IO_WRITE_32 IoWrite32; ///< Offset 20: - CPU I/O port 32-bit write. + SA_MMIO_READ_8 MmioRead8; ///< Offset 24: - Memory Mapped I/O port 8-bit read. + SA_MMIO_READ_16 MmioRead16; ///< Offset 28: - Memory Mapped I/O port 16-bit read. + SA_MMIO_READ_32 MmioRead32; ///< Offset 32: - Memory Mapped I/O port 32-bit read. + SA_MMIO_READ_64 MmioRead64; ///< Offset 36: - Memory Mapped I/O port 64-bit read. + SA_MMIO_WRITE_8 MmioWrite8; ///< Offset 40: - Memory Mapped I/O port 8-bit write. + SA_MMIO_WRITE_16 MmioWrite16; ///< Offset 44: - Memory Mapped I/O port 16-bit write. + SA_MMIO_WRITE_32 MmioWrite32; ///< Offset 48: - Memory Mapped I/O port 32-bit write. + SA_MMIO_WRITE_64 MmioWrite64; ///< Offset 52: - Memory Mapped I/O port 64-bit write. + SA_SMBUS_READ_8 SmbusRead8; ///< Offset 56: - Smbus 8-bit read. + SA_SMBUS_READ_16 SmbusRead16; ///< Offset 60: - Smbus 16-bit read. + SA_SMBUS_WRITE_8 SmbusWrite8; ///< Offset 64: - Smbus 8-bit write. + SA_SMBUS_WRITE_16 SmbusWrite16; ///< Offset 68: - Smbus 16-bit write. + SA_GET_PCI_DEVICE_ADDRESS GetPciDeviceAddress; ///< Offset 72: - Get PCI device address. + SA_GET_PCIE_DEVICE_ADDRESS GetPcieDeviceAddress; ///< Offset 76: - Get PCI express device address. + SA_GET_RTC_TIME GetRtcTime; ///< Offset 80: - Get the current time value. + SA_GET_CPU_TIME GetCpuTime; ///< Offset 84: - The current CPU time in milliseconds. + SA_MEMORY_COPY CopyMem; ///< Offset 88: - Perform byte copy operation. + SA_MEMORY_SET_BYTE SetMem; ///< Offset 92: - Perform byte initialization operation. + SA_MEMORY_SET_WORD SetMemWord; ///< Offset 96: - Perform word initialization operation. + SA_MEMORY_SET_DWORD SetMemDword; ///< Offset 100: - Perform dword initialization operation. + SA_LEFT_SHIFT_64 LeftShift64; ///< Offset 104: - Left shift the 64-bit data value by specified number of bits. + SA_RIGHT_SHIFT_64 RightShift64; ///< Offset 108: - Right shift the 64-bit data value by specified number of bits. + SA_MULT_U64_U32 MultU64x32; ///< Offset 112: - Multiply a 64-bit data value by a 32-bit data value. + SA_DIV_U64_U64 DivU64x64; ///< Offset 116: - Divide a 64-bit data value by a 64-bit data value. + SA_GET_SPD_DATA GetSpdData; ///< Offset 120: - Read the SPD data over the SMBus, at the given SmBus SPD address and copy the data to the data structure. + SA_GET_RANDOM_NUMBER GetRandomNumber; ///< Offset 124: - Get the next random 32-bit number. + SA_CPU_MAILBOX_READ CpuMailboxRead; ///< Offset 128: - Perform a CPU mailbox read. + SA_CPU_MAILBOX_WRITE CpuMailboxWrite; ///< Offset 132: - Perform a CPU mailbox write. + SA_GET_MEMORY_VDD GetMemoryVdd; ///< Offset 136: - Get the current memory voltage (VDD). + SA_SET_MEMORY_VDD SetMemoryVdd; ///< Offset 140: - Set the memory voltage (VDD) to the given value. + SA_CHECKPOINT CheckPoint; ///< Offset 144: - Check point that is called at various points in the MRC. + SA_DEBUG_HOOK DebugHook; ///< Offset 148: - Typically used to display to the I/O port 80h. + SA_DEBUG_PRINT DebugPrint; ///< Offset 152: - Output a string to the debug stream/device. + SA_GET_RTC_CMOS GetRtcCmos; ///< Offset 156: - Get the current value of the specified RTC CMOS location. + SA_MSR_READ_64 ReadMsr64; ///< Offset 160: - Get the current value of the specified MSR location. + SA_MSR_WRITE_64 WriteMsr64; ///< Offset 164 - Set the current value of the specified MSR location. + SA_MRC_RETURN_FROM_SMC MrcReturnFromSmc; ///< Offset 168 - Hook function after returning from MrcStartMemoryConfiguration() + SA_MRC_DRAM_RESET MrcDramReset; ///< Offset 172 - Assert or deassert DRAM_RESET# pin; this is used in JEDEC Reset. + SA_DELAY_NS MrcDelayNs; ///< Offset 176 - Delay (stall) for the given amount of nanoseconds. + SA_SET_MEMORY_PMIC_VOLTAGE SetMemoryPmicVoltage; ///< Offset 180: - Set the memory voltage (VDD/VDDQ/VPP) by PMIC for DDR5. +} SA_FUNCTION_CALLS; + +/// +/// Function calls into the MRC. +/// +typedef struct { + SA_CHANNEL_EXIST MrcChannelExist; ///< Offset 0: - Returns whether Channel is or is not present. + SA_PRINTF MrcPrintf; ///< Offset 4: - Print to output stream/device. + SA_CHANGE_MARGIN MrcChangeMargin; ///< Offset 8: - Change the margin. + SA_SIGN_EXTEND MrcSignExtend; ///< Offset 12: - Sign extends OldMSB to NewMSB Bits (Eg: Bit 6 to Bit 7). + SA_SHIFT_PI_COMMAND_TRAIN ShiftPiCommandTrain; ///< Offset 16: - Move CMD/CTL/CLK/CKE PIs during training. + SA_UPDATE_VREF MrcUpdateVref; ///< Offset 20: - Update the Vref value and wait until it is stable. +} SA_MEMORY_FUNCTIONS; + +/** + Memory Configuration + The contents of this structure are CRC'd by the MRC for option change detection. + This structure is copied en mass to the MrcInput structure. If you add fields here, you must update the MrcInput structure. + Revision history is at the top of this file +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header + UINT16 Size; ///< Offset 28 The size of this structure, in bytes. Must be the first entry in this structure. + UINT8 HobBufferSize; ///< Offset 30 Size of HOB buffer for MRC + + UINT8 SpdProfileSelected; ///< Offset 31 SPD XMP profile selection - for XMP supported DIMM: 0=Default DIMM profile, 1=Custom Profile, 2=XMP Profile 1, 3=XMP Profile 2, 4=XMP Profile 3, 5=XMP User Profile 4, 6=XMP User Profile 5 + + // The following parameters are used only when SpdProfileSelected is User Defined (CUSTOM_PROFILE) + UINT16 tCL; ///< Offset 32 User defined Memory Timing tCL value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 31=Maximum. + UINT16 tRCDtRP; ///< Offset 34 User defined Memory Timing tRCD value (same as tRP), valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 63=Maximum + UINT16 tRAS; ///< Offset 36 User defined Memory Timing tRAS value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 64=Maximum. + UINT16 tWR; ///< Offset 38 User defined Memory Timing tWR value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 24. + UINT16 tRFC; ///< Offset 40 User defined Memory Timing tRFC value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 1023=Maximum. + UINT16 tRRD; ///< Offset 42 User defined Memory Timing tRRD value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 15=Maximum. + UINT16 tWTR; ///< Offset 44 User defined Memory Timing tWTR value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tRTP; ///< Offset 46 User defined Memory Timing tRTP value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 15=Maximum. DDR4 legal values: 5, 6, 7, 8, 9, 10, 12 + UINT16 tFAW; ///< Offset 48 User defined Memory Timing tFAW value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 63=Maximum. + UINT16 tCWL; ///< Offset 50 User defined Memory Timing tCWL value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 20=Maximum. + UINT16 tREFI; ///< Offset 52 User defined Memory Timing tREFI value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 65535=Maximum. + UINT16 PciIndex; ///< Offset 54 Pci index register address: 0xCF8=Default + UINT16 PciData; ///< Offset 56 Pci data register address: 0xCFC=Default + UINT16 VddVoltage; ///< Offset 58 DRAM voltage (Vdd) in millivolts: 0=Platform Default (no override), 1200=1.2V, 1350=1.35V etc. + UINT16 Idd3n; ///< Offset 60 EPG Active standby current (Idd3N) in milliamps from DIMM datasheet. + UINT16 Idd3p; ///< Offset 62 EPG Active power-down current (Idd3P) in milliamps from DIMM datasheet. + + UINT32 EccSupport:1; ///< Offset 64 Bit 0 - DIMM Ecc Support option - for Desktop only: 0=Disable, 1=Enable + UINT32 MrcSafeConfig:1; ///< Bit 1 - MRC Safe Mode: 0=Disable, 1=Enable + UINT32 RemapEnable:1; ///< Bit 2 - This option is used to control whether to enable/disable memory remap above 4GB: 0=Disable, 1=Enable. + UINT32 ScramblerSupport:1; ///< Bit 3 - Memory scrambler support: 0=Disable, 1=Enable + UINT32 Vc1ReadMeter:1; ///< Bit 4 - VC1 Read Metering Enable: 0=Disable, 1=Enable + UINT32 ForceSingleSubchannel:1; ///< Bit 5 - TRUE means use SubChannel0 only (for LPDDR4): 0=Disable, 1=Enable + UINT32 SimicsFlag:1; ///< Bit 6 - Option to Enable SIMICS: 0=Disable, 1=Enable + UINT32 Ddr4DdpSharedClock:1; ///< Bit 7 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP package. 0=Not shared, 1=Shared + UINT32 SharedZqPin:1; ///< Bit 8 - Select if the ZQ resistor is shared between Ranks in DDR4/LPDDR4 DRAM Packages 0=Not Shared, 1=Shared + UINT32 LpDqsOscEn:1; ///< Bit 9 - LPDDR Write DQ/DQS Retraining: 0=Disable, 1=Enable + UINT32 RmtPerTask:1; ///< Bit 10 - Rank Margin Tool Per Task. 0 = Disabled, 1 = Enabled + UINT32 TrainTrace:1; ///< Bit 11 - Trained state tracing debug. 0 = Disabled, 1 = Enabled + UINT32 SafeMode:1; ///< Bit 12 - Define if safe mode is enabled for MC/IO + UINT32 MsHashEnable:1; ///< Bit 13 - Controller Hash Enable: 0=Disable, 1=Enable + UINT32 DisPgCloseIdleTimeout:1; ///< Bit 14 - Disable Page Close Idle Timeout: 0=Enable, 1=Disable + UINT32 Ibecc:1; ///< Bit 15 - In-band ECC: 0=Disable, 1=Enable + UINT32 IbeccOperationMode:2; ///< Bits 16:17 - In-band ECC Operation Mode: 0=Functional Mode protects requests based on the address range, 1=Makes all requests non protected and ignore range checks, 2=Makes all requests protected and ignore range checks + UINT32 ChHashOverride:1; ///< Bit 18 - Select if Channel Hash setting values will be taken from input parameters or automatically taken from POR values depending on DRAM type detected. + UINT32 EccDftEn:1; ///< Bit 19 - ECC DFT support option + UINT32 Write0:1; ///< Bit 20 - Write0 feature (LP5/DDR5): 0=Disable, 1=Enable + UINT32 ReuseAdlSDdr5Board:1; ///< Bit 21 - Indicate whether adl ddr5 board is reused. + UINT32 PeriodicDcc:1; ///< Bit 22 - Periodic DCC: 0=Disable, 1=Enable + UINT32 LpMode:2; ///< Bit 23:24 - LPMode: 0=Auto, 1=Enabled, 2=Disabled, 3=Reserved + UINT32 RsvdO64B25to31:7; ///< Bits 25:31 reserved + UINT8 DisableChannel[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS]; ///< Offset 68-75 + UINT8 Ratio; ///< Offset 76 DDR Frequency ratio, to multiply by 133 or 100 MHz depending on RefClk. 0 = Auto + UINT8 ProbelessTrace; ///< Offset 77 Probeless Trace: 0=Disabled, 1=Enabled + /** + Channel Hash Enable.\n + NOTE: BIT7 will interleave the channels at a 2 cache-line granularity, BIT8 at 4 and BIT9 at 8\n + 0=BIT6, 1=BIT7, 2=BIT8, 3=BIT9 + **/ + UINT8 ChHashInterleaveBit; ///< Offset 78 Option to select interleave Address bit. Valid values are 0 - 3 for BITS 6 - 9 (Valid values for BDW are 0-7 for BITS 6 - 13) + UINT8 SmramMask; ///< Offset 79 Reserved memory ranges for SMRAM + UINT32 BClkFrequency; ///< Offset 80 Base reference clock value, in Hertz: 100000000 = 100Hz, 125000000=125Hz, 167000000=167Hz, 250000000=250Hz + + /// Training Algorithms 1 Offset 84 + UINT32 ECT:1; ///< Bit 0 - Enable/Disable Early Command Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 SOT:1; ///< Bit 1 - Enable/Disable Sense Amp Offset Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 ERDMPRTC2D:1; ///< Bit 2 - Enable/Disable Early ReadMPR Timing Centering 2D. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RDMPRT:1; ///< Bit 3 - Enable/Disable Read MPR Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RCVET:1; ///< Bit 4 - Enable/Disable Receive Enable Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 JWRL:1; ///< Bit 5 - Enable/Disable JEDEC Write Leveling Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 EWRTC2D:1; ///< Bit 6 - Enable/Disable Early Write Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 ERDTC2D:1; ///< Bit 7 - Enable/Disable Early Read Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 WRTC1D:1; ///< Bit 8 - Enable/Disable 1D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 WRVC1D:1; ///< Bit 9 - Enable/Disable 1D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RDTC1D:1; ///< Bit 10 - Enable/Disable 1D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 DIMMODTT:1; ///< Bit 11 - Enable/Disable DIMM ODT Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 DIMMRONT:1; ///< Bit 12 - Enable/Disable DIMM RON training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 WRDSEQT:1; ///< Bit 13 - Enable/Disable Write Drive Strength / Equalization Training 2D. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 WRSRT:1; ///< Bit 14 - Enable/Disable Write Slew Rate traning. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RDODTT:1; ///< Bit 15 - Enable/Disable Read ODT Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RDEQT:1; ///< Bit 16 - Enable/Disable Read Equalization Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RDAPT:1; ///< Bit 17 - Enable/Disable Read Amplifier Power Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 WRTC2D:1; ///< Bit 18 - Enable/Disable 2D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RDTC2D:1; ///< Bit 19 - Enable/Disable 2D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 WRVC2D:1; ///< Bit 20 - Enable/Disable 2D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RDVC2D:1; ///< Bit 21 - Enable/Disable 2D Read Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 CMDVC:1; ///< Bit 22 - Enable/Disable Command Vref Centering Training. Note it is not recommended to change this setting from the default value 0=Disable, 1=Enable. + UINT32 LCT:1; ///< Bit 23 - Enable/Disable Late Command Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RTL:1; ///< Bit 24 - Enable/Disable Round Trip Latency function. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 TAT:1; ///< Bit 25 - Enable/Disable Turn Around Time function. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 RMT:1; ///< Bit 26 - Enable/Disable Rank Margin Tool function: 0=Disable, 1=Enable. + UINT32 MEMTST:1; ///< Bit 27 - Enable/Disable Memory Test function: 0=Disable, 1=Enable. + UINT32 ALIASCHK:1; ///< Bit 28 - Enable/Disable DIMM SPD Alias Check: 0=Disable, 1=Enable + UINT32 RCVENC1D:1; ///< Bit 29 - Enable/Disable Receive Enable Centering Training (LPDDR Only). Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable + UINT32 RMC:1; ///< Bit 30 - Enable/Disable Retrain Margin Check. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable + UINT32 WRDSUDT:1; ///< Bit 31 - Enable/Disable Write Drive Strength Up/Dn independently. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable + /// Training Algorithms 2 Offset 88 + UINT32 DCC : 1; ///< Bit 0 - Enable/Disable Duty Cycle Correction: 0=Disable, 1=Enable. + UINT32 RDVC1D : 1; ///< Bit 1 - Enable/Disable Read Voltage Centering 1D: 0=Disable, 1=Enable. + UINT32 TXTCO : 1; ///< Bit 2 - Enable/Disable Write TCO Comp Training: 0=Disable, 1=Enable. + UINT32 CLKTCO : 1; ///< Bit 3 - Enable/Disable Clock TCO Comp Training: 0=Disable, 1=Enable. + UINT32 CMDSR : 1; ///< Bit 4 - Enable/Disable CMD Slew Rate Training: 0=Disable, 1=Enable. + UINT32 CMDDSEQ : 1; ///< Bit 5 - Enable/Disable CMD Drive Strength and Tx Equalization: 0=Disable, 1=Enable. + UINT32 DIMMODTCA : 1; ///< Bit 6 - Enable/Disable Dimm ODT CA Training: 0=Disable, 1=Enable. + UINT32 TXTCODQS : 1; ///< Bit 7 - Enable/Disable Write TCO Dqs Training: 0=Disable, 1=Enable. + UINT32 CMDDRUD : 1; ///< Bit 8 - Enable/Disable CMD/CTL Drive Strength Up/Dn 2D: 0=Disable, 1=Enable. + UINT32 VCCDLLBP : 1; ///< Bit 9 - Enable/Disable VccDLL bypass to VccIOG training: 0=Disable, 1=Enable. + UINT32 PVTTDNLP : 1; ///< Bit 10 - Enable/Disable PanicVttDnLp Training: 0=Disable, 1=Enable. + UINT32 RDVREFDC : 1; ///< Bit 11 - Enable/Disable Read Vref Decap Training: 0=Disable, 1=Enable. + UINT32 VDDQT : 1; ///< Bit 12 - Enable/Disable Vddq Training: 0=Disable, 1=Enable. + UINT32 RMTBIT : 1; ///< Bit 13 - Enable/Disable Rank Margin Tool Per Bit: 0=Disable, 1=Enable. + UINT32 PDA : 1; ///< BIT 14 - Enable/Disable PDA Enumeration Training. Note it is not recommended to change this setting from the default value: 0=Disable, 1=Enable. + UINT32 DIMMDFE : 1; ///< BIT 15 - Enable/Disable DIMM DFE Training: 0=Disable, 1=Enable. + UINT32 TXDQSDCC : 1; ///< BIT 16 - Enable/Disable TX DQS DCC Training: 0=Disable, 1=Enable. + UINT32 DRAMDCA : 1; ///< BIT 17 - Enable/Disable DRAM DCA Training: 0=Disable, 1=Enable. + UINT32 WRDS : 1; ///< BIT 18 - Enable/Disable Write Driver Strength Training: 0=Disable, 1=Enable. + UINT32 EARLYDIMMDFE : 1; ///< BIT 19 - Enable/Disable EARLY DIMM DFE Training: 0=Disable, 1=Enable. + UINT32 ReservedBits2 :12; ///< Bits 20:31 - Reserved + + UINT32 MrcTimeMeasure:1; ///< Offset 92 Bit 0 - Enables serial debug level to display the MRC execution times only: 0=Disable, 1=Enable + UINT32 MrcFastBoot:1; ///< Bit 1 - Enables the MRC fast boot path for faster cold boot execution: 0=Disable, 1=Enable + UINT32 DqPinsInterleaved:1; ///< Bit 2 - Interleaving mode of DQ/DQS pins which depends on board routing: 0=Disable, 1=Enable + UINT32 RankInterleave:1; ///< Bit 3 - Rank Interleave Mode: 0=Disable, 1=Enable + UINT32 EnhancedInterleave:1; ///< Bit 4 - Enhanced Interleave Mode: 0=Disable, 1=Enable + UINT32 WeaklockEn:1; ///< Bit 5 - Weak Lock Enable: 0=Disable, 1=Enable + UINT32 ChHashEnable:1; ///< Bit 6 - Channel Hash Enable: 0=Disable, 1=Enable + UINT32 EnablePwrDn:1; ///< Bit 7 - Enable Power Down control for DDR: 0=PCODE control, 1=BIOS control + UINT32 EnablePwrDnLpddr:1; ///< Bit 8 - Enable Power Down for LPDDR: 0=PCODE control, 1=BIOS control + UINT32 SrefCfgEna:1; ///< Bit 9 - Enable Self Refresh: 0=Disable, 1=Enable + UINT32 ThrtCkeMinDefeatLpddr:1; ///< Bit 10 - Throttler CKE min defeature for LPDDR: 0=Disable, 1=Enable + UINT32 ThrtCkeMinDefeat:1; ///< Bit 11 - Throttler CKE min defeature: 0=Disable, 1=Enable + UINT32 AutoSelfRefreshSupport:1; ///< Bit 12 - FALSE = No auto self refresh support, TRUE = auto self refresh support + UINT32 ExtTemperatureSupport:1; ///< Bit 13 - FALSE = No extended temperature support, TRUE = extended temperature support + UINT32 MobilePlatform:1; ///< Bit 14 - Memory controller device id indicates: TRUE if mobile, FALSE if not. Note: This will be auto-detected and updated. + UINT32 Force1Dpc:1; ///< Bit 15 - TRUE means force one DIMM per channel, FALSE means no limit + UINT32 ForceSingleRank:1; ///< Bit 16 - TRUE means use Rank0 only (in each DIMM): 0=Disable, 1=Enable + UINT32 VttTermination:1; ///< Bit 17 - Vtt Termination for Data ODT: 0=Disable, 1=Enable + UINT32 VttCompForVsshi:1; ///< Bit 18 - Enable/Disable Vtt Comparator For Vsshi: 0=Disable, 1=Enable + UINT32 ExitOnFailure:1; ///< Bit 19 - MRC option for exit on failure or continue on failure: 0=Disable, 1=Enable + UINT32 NewFeatureEnable1:1; ///< Bit 20 - Generic enable knob for new feature set 1 0: Disable ; 1: Enable + UINT32 NewFeatureEnable2:1; ///< Bit 21 - Generic enable knob for new feature set 2 0: Disable ; 1: Enable + UINT32 RhSelect:2; ///< Bit 22-23 - RH Select: 0=Disable, 1=RFM, 2=pTRR + UINT32 RefreshPanicWm:4; ///< Bit 24-27 - Deprecated from revision 17. Use RefreshWm instead. + UINT32 RefreshHpWm:4; ///< Bit 28-31 - Deprecated from revision 17. Use RefreshWm instead. + UINT32 VddSettleWaitTime; ///< Offset 96 Amount of time in microseconds to wait for Vdd to settle on top of 200us required by JEDEC spec: Default=0 + UINT16 SrefCfgIdleTmr; ///< Offset 100 Self Refresh idle timer: 512=Minimal, 65535=Maximum + UINT16 ChHashMask; ///< Offset 102 Channel Hash Mask: 0x0001=BIT6 set(Minimal), 0x3FFF=BIT[19:6] set(Maximum), 0x30CE= BIT[19:18, 13:12 ,9:7] set + UINT16 DdrFreqLimit; ///< Offset 104 Memory Frequency limit: 0 = Auto, or memory speed value in MT/s: 1067, 1333, 1600 etc. See the possible values in MrcInterface.h + UINT8 MaxRttWr; ///< Offset 106 Maximum DIMM RTT_WR to use in power training: 0=ODT Off, 1 = 120 ohms + UINT8 ThrtCkeMinTmr; ///< Offset 107 Throttler CKE min timer: 0=Minimal, 0xFF=Maximum, 0x00=Default + UINT8 ThrtCkeMinTmrLpddr; ///< Offset 108 Throttler CKE min timer for LPDDR: 0=Minimal, 0xFF=Maximum, 0x00=Default + BOOLEAN PerBankRefresh; ///< Offset 109 Enables and Disables the per bank refresh. This only impacts memory technologies that support PBR: LPDDR4, LPDDR5 and DDR5. FALSE=Disabled, TRUE=Enabled + UINT8 SaGv; ///< Offset 110 SA GV: 0=Disabled, 1=Point1, 2=Point2, 3=Point3, 4=Point4, 5=Enabled + UINT8 NModeSupport; ///< Offset 111 Memory N Mode Support - Enable user to select Auto, 1N or 2N: 0=AUTO, 1=1N, 2=2N. + UINT8 RefClk; ///< Offset 112 Selects the DDR base reference clock. 0x01 = 100MHz, 0x00 = 133MHz + UINT8 EnCmdRate; ///< Offset 113 CMD Rate Enable: 0=Disable, 5=2 CMDs, 7=3 CMDs, 9=4 CMDs, 11=5 CMDs, 13=6 CMDs, 15=7 CMDs + UINT8 Refresh2X; ///< Offset 114 Refresh 2x: 0=Disable, 1=Enable for WARM or HOT, 2=Enable for HOT only + UINT8 EpgEnable; ///< Offset 115 Enable Energy Performance Gain. + UINT8 UserThresholdEnable; ///< Offset 116 Flag to manually select the DIMM CLTM Thermal Threshold, 0=Disable, 1=Enable, 0=Default + UINT8 UserBudgetEnable; ///< Offset 117 Flag to manually select the Budget Registers for CLTM Memory Dimms , 0=Disable, 1=Enable, 0=Default + UINT8 RetrainOnFastFail; ///< Offset 118 Restart MRC in Cold mode if SW MemTest fails during Fast flow. 0 = Disabled, 1 = Enabled + UINT8 PowerDownMode; ///< Offset 119 CKE Power Down Mode: 0xFF=AUTO, 0=No Power Down, 1= APD mode, 6=PPD-DLL Off mode + UINT8 PwdwnIdleCounter; ///< Offset 120 CKE Power Down Mode Idle Counter: 0=Minimal, 255=Maximum, 0x80=0x80 DCLK + UINT8 CmdRanksTerminated; ///< Offset 121 LPDDR: Bitmask of ranks that have CA bus terminated. 0x01=Default, Rank0 is terminating and Rank1 is non-terminating + UINT16 MsHashMask; ///< Offset 122 Controller Hash Mask: 0x0001=BIT6 set(Minimal), 0x3FFF=BIT[19:6] set(Maximum), 0x30CE= BIT[19:18, 13:12 ,9:7] set + UINT32 Lp5CccConfig; ///< Offset 124 BitMask where bits [3:0] are controller 0 Channel [3:0] and [7:4] are Controller 1 Channel [3:0]. 0 selects Ascending mapping and 1 selects Descending mapping. + UINT8 RMTLoopCount; ///< Offset 128 Indicates the Loop Count to be used for Rank Margin Tool Testing: 1=Minimal, 32=Maximum, 0=AUTO, 0=Default + UINT8 MsHashInterleaveBit; ///< Offset 129 Option to select interleave Address bit. Valid values are 0 - 3 for BITS 6 - 9 + UINT8 GearRatio; ///< Offset 130 Gear mode when SAGV is disabled: 0=Auto, 1 - Gear1, 2 - Gear2, 4 - Gear4. + UINT8 Ddr4OneDpc; ///< Offset 131 DDR4 1DPC performance feature: 0 - Disabled; 1 - Enabled on DIMM0 only, 2 - Enabled on DIMM1 only; 3 - Enabled on both DIMMs. (bit [0] - DIMM0, bit [1] - DIMM1) + UINT32 BclkRfiFreq[MEM_MAX_SAGV_POINTS]; ///< Offset 132 Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz 0 - No RFI Tuning. Range is 98Mhz-100Mhz. + UINT16 SaGvFreq[MEM_MAX_SAGV_POINTS]; ///< Offset 148 Frequency per SAGV point. 0 is Auto, otherwise holds the frequency value expressed as an integer: 0=Default, 1067, 1333, 1600, 1800, 1867, etc. + UINT8 SaGvGear[MEM_MAX_SAGV_POINTS]; ///< Offset 156 Gear ratio per SAGV point. 0 is Auto, otherwise holds the Gear ratio expressed as an integer: 0=Auto, 1, 2, 4 + UINT8 IbeccProtectedRangeEnable[MEM_MAX_IBECC_REGIONS]; ///< Offset 160 Enable use of address range for ECC Protection: 0=Disabled, 1=Enabled + UINT32 IbeccProtectedRangeBase[MEM_MAX_IBECC_REGIONS]; ///< Offset 168 Base address for address range of ECC Protection: [0..0x3FFFFFF] + UINT32 IbeccProtectedRangeMask[MEM_MAX_IBECC_REGIONS]; ///< Offset 200 Mask address for address range of ECC Protection: [1..0x3FFFFFF] + + UINT8 McRefresh2X; ///< Offset 232 Deprecated from revision 19, use McRefreshRate instead + UINT8 Lfsr0Mask; ///< Offset 233 RH pTRR LFSR0 Mask + UINT8 Lfsr1Mask; ///< Offset 234 RH pTRR LFSR1 Mask + UINT8 CmdMirror; ///< Offset 235 BitMask where bits [3:0] are controller 0 Channel [3:0] and [7:4] are Controller 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. + UINT8 AllowOppRefBelowWriteThrehold; ///< Offset 236 Option to allow opportunistic refreshes while we don't exit power down. + UINT8 WriteThreshold; ///< Offset 237 Option to set number of writes that can be accumulated while CKE is low before CKE is asserted. + UINT8 PprEnable; ///< Offset 238 Post-Package Repair: 0: Disabled, 2: Hard PPR + UINT8 MarginLimitCheck; ///< Offset 239 Margin limit check enable: 0=Disable, 1=L1 only, 2=L2 only, 3=Both L1 and L2 + UINT16 MarginLimitL2; ///< Offset 240 Margin limit check L2 threshold: 100=Default + UINT8 LpddrRttWr; ///< Offset 242 Initial RttWr for LP4/5 in Ohms, 0 means Auto + UINT8 LpddrRttCa; ///< Offset 243 Initial RttCa for LP4/5 in Ohms, 0 means Auto + UINT16 VddqVoltage; ///< Offset 244 DRAM voltage (Vddq) in millivolts: 0=Platform Default (no override), 1200=1.2V, 1350=1.35V etc. + UINT16 VppVoltage; ///< Offset 246 DRAM voltage (Vpp) in millivolts: 0=Platform Default (no override), 1800=1.8V, 2050=2.05V etc. + UINT8 ExtendedBankHashing; ///< Offset 248 Enable EBH (Extended Bank Hashing): 0=Disabled; 1 = Enabled + UINT8 DynamicMemoryBoost; ///< Offset 249 Enable/Disable Dynamic Memory Boost Feature. Only valid if SpdProfileSelected is an XMP Profile; otherwise ignored. 0=Disabled, 1=Enabled. + UINT8 IbeccErrInjControl; ///< Offset 250 In-band ECC: Error Injection Control 0: No Error Injection, 1:Inject Correctable Error Address match, 3:Inject Correctable Error on insertion counter, 5: Inject Uncorrectable Error Address match, 7:Inject Uncorrectable Error on insertion counter + UINT8 RealtimeMemoryFrequency; ///< Offset 251 Enable/Disable Realtime Memory Frequency feature. Only valid if SpdProfileSelected is an XMP Profile; otherwise ignored. 0=Disabled, 1=Enabled. + UINT32 IbeccErrInjCount; ///< Offset 252 Number of transactions between ECC error injection + UINT64 IbeccErrInjAddress; ///< Offset 256 Address to match against for ECC error injection + UINT64 IbeccErrInjMask; ///< Offset 264 Mask to match against for ECC error injection + UINT8 RefreshWm; ///< Offset 272 Refresh Watermarks, 0 = Low, 1 = High + UINT8 McRefreshRate; ///< Offset 273 Type of solution to be used for RHP - 0/1/2/3 = RefreshNORMAL/Refresh1x/Refresh2x/Refresh4x + UINT8 Reserved274[2]; ///< Offset 274-275 Reserved for natural alignment + UINT32 DebugValue; ///< Offset 276 Debug Value for general use + UINT16 tRFCpb; ///< Offset 280 User defined Memory Timing tRFCpb value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tRFC2; ///< Offset 282 User defined Memory Timing tRFC2 value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tRFC4; ///< Offset 284 User defined Memory Timing tRFC4 value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tRRD_L; ///< Offset 286 User defined Memory Timing tRRD_L value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tRRD_S; ///< Offset 288 User defined Memory Timing tRRD_S value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tWTR_L; ///< Offset 290 User defined Memory Timing tWTR_L value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tCCD_L; ///< Offset 292 User defined Memory Timing tCCD_L value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT16 tWTR_S; ///< Offset 294 User defined Memory Timing tWTR_S value, valid when SpdProfileSelected is CUSTOM_PROFILE: 0=AUTO, 28=Maximum. + UINT64 EccErrInjAddress; ///< Offset 296 Address to match against for ECC error injection + UINT64 EccErrInjMask; ///< Offset 304 Mask to match against for ECC error injection + UINT32 EccErrInjCount; ///< Offset 312 Number of transactions between ECC error injection + + + UINT16 FreqLimitMixedConfig; ///< Offset 316 Override the reduced speed in mixed 2DPC config or non-POR 2DPC config. 0=Auto, otherwise speed in MT/s: 1067, 1333 etc. See the possible values in MrcInterface.h + UINT8 FirstDimmBitMask; ///< Offset 318 Defines which DIMM should be populated first on a 2DPC board. + ///< 4 bit mask: Bit[0]: MC0 DIMM0, Bit[1]: MC0 DIMM1, Bit[2]: MC1 DIMM0, Bit[3]: MC1 DIMM1. + ///< For each MC, the first DIMM to be populated should be set to '1'. + ///< Note: this mask is only for non-ECC DIMM. + UINT8 UserBd; ///< Offset 319 MrcBoardType + ///< 1 - Desktop 1DPC + ///< 2 - Desktop 2DPC, Daisy Chain, far DIMM should be populated first + ///< 3 - Desktop 2DPC, T-topology with asymmetrical DIMM0/1 routing, has particular DIMM population order + ///< 4 - Desktop 2DPC, T-topology with symmetrical DIMM0/1 routing, no particular DIMM population order + ///< 5 - ULT Mobile + UINT8 SagvSwitchFactorIA; ///< Offset 320 Sagv Switch Factor: 1 , 50=Maximum, default 30. + UINT8 SagvSwitchFactorGT; ///< Offset 321 Sagv Switch Factor: 1 , 50=Maximum, default 30. + UINT8 SagvSwitchFactorIO; ///< Offset 322 Sagv Switch Factor: 1 , 50=Maximum, default 30. + UINT8 SagvSwitchFactorStall; ///< Offset 323 Sagv Switch Factor: 1 , 50=Maximum, default 30. + UINT8 SagvHeuristicsUpControl;///< Offset 324 Sagv duration in ms before heuristics up: 1 , 50=Maximum, default 1ms. + UINT8 SagvHeuristicsDownControl; ///< Offset 325 Sagv duration in ms before heuristics down: 1 , 50=Maximum, default 1ms. + UINT16 FreqLimitMixedConfig_1R1R_8GB; ///< Offset 326 The frequency limit for mixed DIMM configuration 1R1R_8GB (1R 8GB and 1R 8GB in one channel). + ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000. + UINT16 FreqLimitMixedConfig_1R1R_16GB; ///< Offset 328 The frequency limit for mixed DIMM configuration 1R1R_16GB (1R 16GB and 1R 16GB in one channel). + ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000. + UINT16 FreqLimitMixedConfig_1R1R_8GB_16GB; ///< Offset 330 The frequency limit for mixed DIMM configuration 1R1R_8GB_16GB (1R 8GB and 1R 16GB in one channel). + ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000. + UINT16 FreqLimitMixedConfig_2R2R; ///< Offset 332 The frequency limit for mixed DIMM configuration 2R_2R (2R 32GB and 2R 32GB in one channel). + ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000. + UINT16 LctCmdEyeWidth; ///< Offset 334 LCT Command eyewidth + UINT8 FirstDimmBitMaskEcc; ///< Offset 336 Defines which ECC DIMM should be populated first on a 2DPC board. + ///< 4 bit mask: Bit[0]: MC0 DIMM0, Bit[1]: MC0 DIMM1, Bit[2]: MC1 DIMM0, Bit[3]: MC1 DIMM1. + ///< For each MC, the first DIMM to be populated should be set to '1'. + ///< For example, if one MC is T-topology, there is no special population rule, can put it as 11 for this MC and it means either D0 or D1 can be + ///< be populated firstly. + ///< Note: this mask is only for ECC DIMM, not for non-ECC DIMM. + UINT8 Lp5BankMode; ///< Offset 337 LP5 Bank Mode + UINT8 OverloadSAM; ///< Offset 338 Overload SAM to copy the sagv frquency point. + UINT8 Reserved339[5]; ///< Offset 339-343 Reserved for natural alignment +} MEMORY_CONFIGURATION; + +/// Memory Configuration +/// The contents of this structure are not CRC'd by the MRC for option change detection. +/// Revision 1: - Initial version. +/// Revision 2: - Added MemTestOnWarmBoot +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header + SA_FUNCTION_CALLS SaCall; ///< Offset 28 Function calls into the SA. + SA_MEMORY_FUNCTIONS MrcCall; ///< Offset 212 Function calls into the MRC. + SPD_DATA_BUFFER *SpdData; ///< Offset 236 Memory SPD data, will be used by the MRC when SPD SmBus address is zero. + SA_MEMORY_DQDQS_MAPPING *DqDqsMap; ///< Offset 240 LPDDR DQ bit and DQS byte swizzling between CPU and DRAM. + SA_MEMORY_RCOMP *RcompData; ///< Offset 244 DDR RCOMP resistors and target values. + UINT64 PlatformMemorySize; ///< Offset 248 The minimum platform memory size required to pass control into DXE + UINT32 CleanMemory:1; ///< Offset 256 Ask MRC to clear memory content: FALSE=Do not Clear Memory; TRUE=Clear Memory + UINT32 ReservedBits5:31; + /** + Sets the serial debug message level\n + 0x00 = Disabled\n + 0x01 = Errors only\n + 0x02 = Errors and Warnings\n + 0x03 = Errors, Warnings, and Info\n + 0x04 = Errors, Warnings, Info, and Events\n + 0x05 = Displays Memory Init Execution Time Summary only\n + **/ + UINT8 SerialDebugLevel; ///< Offset 260 + UINT8 MemTestOnWarmBoot; ///< Offset 261 Run Base Memory Test On WarmBoot: 0=Disabled, 1=Enabled + UINT8 Reserved11[2]; ///< Offset 262 - 263 Reserved +} MEMORY_CONFIG_NO_CRC; +#pragma pack(pop) + +#endif // _MEMORY_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h new file mode 100644 index 0000000000..84cc21091f --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h @@ -0,0 +1,65 @@ +/** @file + DMI policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _PCH_DMI_CONFIG_H_ +#define _PCH_DMI_CONFIG_H_ + +extern EFI_GUID gPchDmiConfigGuid; + +/* +Revision 1: - Initial version. +*/ +#define PCH_DMI_PREMEM_CONFIG_REVISION 1 +extern EFI_GUID gPchDmiPreMemConfigGuid; + +#pragma pack (push,1) + +#define PCH_DMI_HWEQ_COEFFS_MAX 8 +/** + Lane specific Dmi Gen3, Gen4 equalization parameters. +**/ +typedef struct { + UINT8 Cm; ///< Coefficient C-1 + UINT8 Cp; ///< Coefficient C+1 + UINT8 Rsvd0[2]; ///< Reserved bytes +} PCH_DMI_EQ_PARAM; + +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block + PCH_DMI_EQ_PARAM DmiHwEqGen3CoeffList[PCH_DMI_HWEQ_COEFFS_MAX]; + UINT8 DmiHweq; + UINT8 Reserved[3]; +} PCH_DMI_PREMEM_CONFIG; + + +/** + The PCH_DMI_CONFIG block describes the expected configuration of the PCH for DMI. + Revision 1: + - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + + UINT32 PwrOptEnable : 1; ///< 0: Disable; 1: Enable DMI Power Optimizer on PCH side. + UINT32 DmiAspmCtrl : 8; ///< ASPM configuration on the PCH side of the DMI/OPI Link. Default is PchPcieAspmAutoConfig + UINT32 CwbEnable : 1; ///< 0: Disable; 1: Enable Central Write Buffer feature configurable and enabled by default + UINT32 L1RpCtl : 1; ///< 0: Disable; 1: Enable Allow DMI enter L1 when all root ports are in L1, L0s or link down. Disabled by default. + /** + When set to TRUE turns on: + - L1 State Controller Power Gating + - L1 State PHY Data Lane Power Gating + - PHY Common Lane Power Gating + - Hardware Autonomous Enable + - PMC Request Enable and Sleep Enable + **/ + UINT32 DmiPowerReduction : 1; + UINT32 ClockGating : 1; ///< 0: Disable; 1: Enable clock gating. + UINT32 Rsvdbits : 19; ///< Reserved bits +} PCH_DMI_CONFIG; + +#pragma pack (pop) + +#endif // _PCH_DMI_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h new file mode 100644 index 0000000000..d97f3b878a --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h @@ -0,0 +1,180 @@ +/** @file + PCH Pcie root port policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _PCH_PCIERP_CONFIG_H_ +#define _PCH_PCIERP_CONFIG_H_ + +#include +#include +#include + + + + + +/* + Making any setup structure change after code frozen + will need to maintain backward compatibility, bump up + structure revision and update below history table\n + +Revision 1: - Initial version. +*/ +#define PCIE_RP_DXE_CONFIG_REVISION 1 + +extern EFI_GUID gPchPcieConfigGuid; +extern EFI_GUID gPcieRpPreMemConfigGuid; + +#pragma pack (push,1) + +typedef enum { + PchPcieOverrideDisabled = 0, + PchPcieL1L2Override = 0x01, + PchPcieL1SubstatesOverride = 0x02, + PchPcieL1L2AndL1SubstatesOverride = 0x03, + PchPcieLtrOverride = 0x04 +} PCH_PCIE_OVERRIDE_CONFIG; + +/// +/// The values before AutoConfig match the setting of PCI Express Base Specification 1.1, please be careful for adding new feature +/// +typedef enum { + PchPcieAspmDisabled, + PchPcieAspmL0s, + PchPcieAspmL1, + PchPcieAspmL0sL1, + PchPcieAspmAutoConfig, + PchPcieAspmMax +} PCH_PCIE_ASPM_CONTROL; + +/** + Refer to PCH EDS for the PCH implementation values corresponding + to below PCI-E spec defined ranges +**/ +typedef enum { + PchPcieL1SubstatesDisabled, + PchPcieL1SubstatesL1_1, + PchPcieL1SubstatesL1_1_2, + PchPcieL1SubstatesMax +} PCH_PCIE_L1SUBSTATES_CONTROL; + +enum PCH_PCIE_MAX_PAYLOAD { + PchPcieMaxPayload128 = 0, + PchPcieMaxPayload256, + PchPcieMaxPayloadMax +}; + + +/** + PCH_PCIE_CLOCK describes PCIe source clock generated by PCH. +**/ +typedef struct { + UINT8 Usage; ///< Purpose of given clock (see PCH_PCIE_CLOCK_USAGE). Default: Unused, 0xFF + UINT8 ClkReq; ///< ClkSrc - ClkReq mapping. Default: 1:1 mapping with Clock numbers + UINT8 RsvdBytes[2]; ///< Reserved byte + UINT32 ClkReqGpioPinMux; /// Muxed GPIO details. Refer GPIO_*_MUXING_SRC_CLKREQ_x* +} PCH_PCIE_CLOCK; + + +/** + The PCH_PCI_EXPRESS_ROOT_PORT_CONFIG describe the feature and capability of each PCH PCIe root port. +**/ +typedef struct { + PCIE_ROOT_PORT_COMMON_CONFIG PcieRpCommonConfig; ///an instance of Pcie Common Config + UINT8 ExtSync; ///< Indicate whether the extended synch is enabled. 0: Disable; 1: Enable. + // + // Error handlings + // + UINT8 SystemErrorEnable; ///< Indicate whether the System Error is enabled. 0: Disable; 1: Enable. + /** + The Multiple VC (MVC) supports hardware to avoid HoQ block for latency sensitive TC. + Currently it is only applicable to Root Ports with 2pX4 port configuration with 2 VCs,or + DMI port configuration with 3 VCs. For Root Ports 2pX4 configuration, two RPs (RP0, + RP2) shall support two PCIe VCs (VC0 & VC1) and the other RPs (RP1, RP3) shall be + disabled. + 0: Disable; 1: Enable + **/ + UINT8 MvcEnabled; + /** + Virtual Pin Port is industry standard introduced to PCIe Hot Plug support in systems + when GPIO pins expansion is needed. It is server specific feature. + 0x00: Default; 0xFF: Disabled + **/ + UINT8 VppPort; + UINT8 VppAddress; ///< PCIe Hot Plug VPP SMBus Address. Default is zero. + UINT8 RsvdBytes0[3]; ///< Reserved bytes +} PCH_PCIE_ROOT_PORT_CONFIG; + +/** + The PCH_PCIE_CONFIG block describes the expected configuration of the PCH PCI Express controllers + Revision 1: + - Initial version. + Revision 2: + - Moved EnablePort8xhDecode policy to PCIE_COMMON_CONFIG +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /// + /// These members describe the configuration of each PCH PCIe root port. + /// + PCIE_COMMON_CONFIG PcieCommonConfig; + PCH_PCIE_ROOT_PORT_CONFIG RootPort[PCH_MAX_PCIE_ROOT_PORTS]; + PCH_PCIE_ROOT_PORT_CONFIG DmiPort; + + /// + /// (Test) The Index of PCIe Port that is selected for Port8xh Decode (0 Based) + /// + UINT8 PchPciePort8xhDecodePortIndex; + UINT8 DmiPowerReduction; + UINT8 RsvdBytes0[2]; +} PCH_PCIE_CONFIG; + +/** + The PCH_PCIE_RP_PREMEM_CONFIG block describes early configuration of the PCH PCI Express controllers + Revision 1: + - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /** + Root Port enabling mask. + Bit0 presents RP1, Bit1 presents RP2, and so on. + 0: Disable; 1: Enable. + **/ + UINT32 RpEnabledMask; + /// Configuration of PCIe source clocks + /// + PCH_PCIE_CLOCK PcieClock[PCH_MAX_PCIE_CLOCKS]; + + /** + Per Controller Bifurcation Configuration + 0: Disabled; 1: 4x1; 2: 1x2_2x1; 3: 2x2; 4: 1x4; 5: 4x2; 6: 1x4_2x2; 7: 2x2_1x4; 8: 2x4; 9: 1x8 (see: PCIE_BIFURCATION_CONFIG) + **/ + UINT8 Bifurcation[PCH_MAX_PCIE_CONTROLLERS]; + UINT8 Rsvd4[(4 - PCH_MAX_PCIE_CONTROLLERS % 4) % 4]; +} PCH_PCIE_RP_PREMEM_CONFIG; + +/** + The PCIE_RP_DXE_CONFIG block describes the expected configuration of the PCH PCI Express controllers in DXE phase + + Revision 1: + - Init version +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + + /** + PCIe device override table + The PCIe device table is being used to override PCIe device ASPM settings. + And it's only used in DXE phase. + Please refer to PCIE_DEVICE_OVERRIDE structure for the table. + Last entry VendorId must be 0. + **/ + PCIE_DEVICE_OVERRIDE *PcieDeviceOverrideTablePtr; +} PCIE_RP_DXE_CONFIG; + +#pragma pack (pop) + +#endif // _PCH_PCIERP_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h new file mode 100644 index 0000000000..07a5644f43 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h @@ -0,0 +1,408 @@ +/** @file + PCIe Config Block + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _PCIE_CONFIG_H_ +#define _PCIE_CONFIG_H_ +#include + +#define PCIE_LINK_EQ_COEFFICIENTS_MAX 10 +#define PCIE_LINK_EQ_PRESETS_MAX 11 +extern EFI_GUID gPcieConfigGuid; + +#pragma pack (push,1) + +enum PCIE_COMPLETION_TIMEOUT { + PcieCompletionTO_Default, + PcieCompletionTO_50_100us, + PcieCompletionTO_1_10ms, + PcieCompletionTO_16_55ms, + PcieCompletionTO_65_210ms, + PcieCompletionTO_260_900ms, + PcieCompletionTO_1_3P5s, + PcieCompletionTO_4_13s, + PcieCompletionTO_17_64s, + PcieCompletionTO_Disabled +}; + +typedef enum { + PcieAuto, + PcieGen1, + PcieGen2, + PcieGen3, + PcieGen4, + PcieGen5 +} PCIE_SPEED; + +typedef enum { + PcieDisabled, + PcieL1SUB_1, + PcieL1SUB_1_2 +}L1_SUBSTATES; + +/** + Represent lane specific PCIe Gen3 equalization parameters. +**/ +typedef struct { + UINT8 Cm; ///< Coefficient C-1 + UINT8 Cp; ///< Coefficient C+1 + UINT8 Rsvd0[2]; ///< Reserved bytes +} PCIE_EQ_PARAM; + +typedef struct { + UINT16 LtrMaxSnoopLatency; ///< (Test) Latency Tolerance Reporting, Max Snoop Latency. + UINT16 LtrMaxNoSnoopLatency; ///< (Test) Latency Tolerance Reporting, Max Non-Snoop Latency. + UINT8 SnoopLatencyOverrideMode; ///< (Test) Latency Tolerance Reporting, Snoop Latency Override Mode. + UINT8 SnoopLatencyOverrideMultiplier; ///< (Test) Latency Tolerance Reporting, Snoop Latency Override Multiplier. + UINT16 SnoopLatencyOverrideValue; ///< (Test) Latency Tolerance Reporting, Snoop Latency Override Value. + UINT8 NonSnoopLatencyOverrideMode; ///< (Test) Latency Tolerance Reporting, Non-Snoop Latency Override Mode. + UINT8 NonSnoopLatencyOverrideMultiplier; ///< (Test) Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. + UINT16 NonSnoopLatencyOverrideValue; ///< (Test) Latency Tolerance Reporting, Non-Snoop Latency Override Value. + UINT8 LtrConfigLock; ///< 0: Disable; 1: Enable. + UINT8 ForceLtrOverride; + UINT16 RsvdByte1; +} PCIE_LTR_CONFIG; + + +/** + Specifies the form factor that the slot + implements. For custom form factors that + do not require any special handling please + set PcieFormFactorOther. +**/ +typedef enum { + PcieFormFactorOther = 0, + PcieFormFactorCem, + PcieFormFactorMiniPci, + PcieFormFactorM2, + PcieFormFactorOcuLink, + PcieFormFactorExpressModule, // Also known as Server IO module(SIOM) + PcieFormFactorExpressCard, + PcieFormFactorU2 // Also known as SF-8639 +} PCIE_FORM_FACTOR; + +typedef enum { + PcieLinkHardwareEq = 0, ///< Hardware is responsible for performing coefficient/preset search. + PcieLinkFixedEq ///< No coefficient/preset search is performed. Fixed values are used. +} PCIE_LINK_EQ_METHOD; + +typedef enum { + PcieLinkEqPresetMode = 0, ///< Use presets during PCIe link equalization + PcieLinkEqCoefficientMode ///< Use coefficients during PCIe link equalization +} PCIE_LINK_EQ_MODE; + +typedef struct { + UINT32 PreCursor; ///< Pre-cursor coefficient + UINT32 PostCursor; ///< Post-cursor coefficient +} PCIE_LINK_EQ_COEFFICIENTS; + +/** + PCIe Link EQ Platform Settings +**/ +typedef struct { + UINT8 PcieLinkEqMethod; ///< Tells BIOS which link EQ method should be used for this port. Please refer to PCIE_LINK_EQ_METHOD for details of supported methods. Default: PcieLinkHardwareEq + UINT8 PcieLinkEqMode; ///< Tells BIOS which mode should be used for PCIe link EQ. Please refer to PCIE_LINK_EQ_MODE for details of supported modes. Default: depends on SoC + /** + Specifies if BIOS should perform local transmitter override during phase 2 of EQ process. + If enabled value in Ph2LocalTransmitterOverridePreset must be valid. + 0: Disabled; 1: Enabled + **/ + UINT8 LocalTransmitterOverrideEnable; + /** + Tells BIOS how many presets/coefficients should be used during link EQ. + Entries in the Ph3CoefficientsList or Ph3PresetList(depending on chosen mode) need to be valid up to the number specified in this field. + **/ + UINT8 Ph3NumberOfPresetsOrCoefficients; + + PCIE_LINK_EQ_COEFFICIENTS Ph3CoefficientsList[PCIE_LINK_EQ_COEFFICIENTS_MAX]; ///< List of the PCIe coefficients to be used during equalization process. Only valid if PcieLinkEqMode is PcieLinkEqCoefficientMode + UINT32 Ph3PresetList[PCIE_LINK_EQ_PRESETS_MAX]; ///< List of the PCIe preset values to be used during equalization process. Only valid if PcieLinkEqMode is PcieLinkEqPresetMode + UINT32 Ph1DownstreamPortTransmitterPreset; ///< Specifies the value of the downstream port transmitter preset to be used during phase 1 of the equalization process. Will be applied to all lanes + UINT32 Ph1UpstreamPortTransmitterPreset; ///< Specifies the value of the upstream port transmitter preset to be used during phase 1 of the equalization process. Will be applied to all lanes + /** + Specifies the preset that should be used during local transmitter override during phase 2 of EQ process. + Used only if LocalTransmitterOverrideEnable is TRUE. Will be applied to all PCIe lanes of the root port. + Valid up to the PCIE_LINK_EQ_PRESET_MAX value. Default: 0<\b> + **/ + UINT32 Ph2LocalTransmitterOverridePreset; + UINT32 PCETTimer; ///< PCET Timer value for single PCIe speed. + UINT8 RemotePresetCoeffoverride; ///< Remote Transmitter Preset Coefficient Override for single PCIe speed. + /** + PCIe Equalization Phase 3 Enable Control + - Disabled (0x0) : Disable phase 3 (Default) + - Enabled (0x1) : Enable phase 3 + **/ + UINT8 EqPh3Bypass; + /** + PCIe Equalization Phase 2-3 Enable Control + - Disabled (0x0) : Disable Phase 2 - Phase 3 (Default) + - Enabled (0x1) : Enable Phase 2 - Phase 3 + **/ + UINT8 EqPh23Bypass; + UINT8 TsLockTimer; ///< 8.0GT/s Training Sequence Wait Latency For Presets / Coefficients Evaluation - Gen3 TS Lock Timer +} PCIE_LINK_EQ_PLATFORM_SETTINGS; + +//Note: This structure will be expanded to hold all common PCIe policies between SA and PCH RootPort +typedef struct { + UINT32 HotPlug : 1; ///< Indicate whether the root port is hot plug available. 0: Disable; 1: Enable. + UINT32 PmSci : 1; ///< Indicate whether the root port power manager SCI is enabled. 0: Disable; 1: Enable. + UINT32 TransmitterHalfSwing : 1; ///< Indicate whether the Transmitter Half Swing is enabled. 0: Disable; 1: Enable. + UINT32 AcsEnabled : 1; ///< Indicate whether the ACS is enabled. 0: Disable; 1: Enable. + // + // Error handlings + // + UINT32 AdvancedErrorReporting : 1; ///< Indicate whether the Advanced Error Reporting is enabled. 0: Disable; 1: Enable. + UINT32 UnsupportedRequestReport : 1; ///< Indicate whether the Unsupported Request Report is enabled. 0: Disable; 1: Enable. + UINT32 FatalErrorReport : 1; ///< Indicate whether the Fatal Error Report is enabled. 0: Disable; 1: Enable. + UINT32 NoFatalErrorReport : 1; ///< Indicate whether the No Fatal Error Report is enabled. 0: Disable; 1: Enable. + UINT32 CorrectableErrorReport : 1; ///< Indicate whether the Correctable Error Report is enabled. 0: Disable; 1: Enable. + UINT32 SystemErrorOnFatalError : 1; ///< Indicate whether the System Error on Fatal Error is enabled. 0: Disable; 1: Enable. + UINT32 SystemErrorOnNonFatalError : 1; ///< Indicate whether the System Error on Non Fatal Error is enabled. 0: Disable; 1: Enable. + UINT32 SystemErrorOnCorrectableError : 1; ///< Indicate whether the System Error on Correctable Error is enabled. 0: Disable; 1: Enable. + /** + Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD + Changes Max Payload Size Supported field in Device Capabilities of the root port. + **/ + UINT32 MaxPayload : 2; + UINT32 DpcEnabled : 1; ///< Downstream Port Containment. 0: Disable; 1: Enable + UINT32 RpDpcExtensionsEnabled : 1; ///< RP Extensions for Downstream Port Containment. 0: Disable; 1: Enable + /** + Indicates how this root port is connected to endpoint. 0: built-in device; 1: slot + Built-in is incompatible with hotplug-capable ports. + **/ + UINT32 SlotImplemented : 1; + UINT32 PtmEnabled : 1; ///< Enables PTM capability + UINT32 SlotPowerLimitScale : 2; ///< (Test) Specifies scale used for slot power limit value. Leave as 0 to set to default. Default is zero. + UINT32 SlotPowerLimitValue : 12; //< (Test) Specifies upper limit on power supplies by slot. Leave as 0 to set to default. Default is zero. + /** + Probe CLKREQ# signal before enabling CLKREQ# based power management. + Conforming device shall hold CLKREQ# low until CPM is enabled. This feature attempts + to verify CLKREQ# signal is connected by testing pad state before enabling CPM. + In particular this helps to avoid issues with open-ended PCIe slots. + This is only applicable to non hot-plug ports. + 0: Disable; 1: Enable. + **/ + UINT32 ClkReqDetect : 1; + /** + Set if the slot supports manually operated retention latch. + **/ + UINT32 MrlSensorPresent : 1; + UINT32 RelaxedOrder : 1; + UINT32 NoSnoop : 1; + /// + /// This member describes whether Peer Memory Writes are enabled on the platform. 0: Disable; 1: Enable. + /// + UINT32 EnablePeerMemoryWrite : 1; + /// + /// This member describes whether the PCI Express Clock Gating for each root port + /// is enabled by platform modules. 0: Disable; 1: Enable. + /// + UINT32 ClockGating : 1; + /// + /// This member describes whether the PCI Express Power Gating for each root port + /// is enabled by platform modules. 0: Disable; 1: Enable. + /// + UINT32 PowerGating : 1; + UINT32 RsvdBits0 : 25; ///< Reserved bits. + /** + PCIe Gen3 Equalization Phase 3 Method (see CPU_PCIE_EQ_METHOD). + 0: DEPRECATED, hardware equalization; 1: hardware equalization; 4: Fixed Coefficients + **/ + UINT8 Gen3EqPh3Method; + UINT8 PhysicalSlotNumber; ///< Indicates the slot number for the root port. Default is the value as root port index. + UINT8 CompletionTimeout; ///< The completion timeout configuration of the root port (see: CPU_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. + // + // Power Management + // + UINT8 Aspm; ///< The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL). Default is PchPcieAspmAutoConfig. + UINT8 L1Substates; ///< The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL). Default is PchPcieL1SubstatesL1_1_2. + UINT8 LtrEnable; ///< Latency Tolerance Reporting Mechanism. 0: Disable; 1: Enable. + UINT8 EnableCpm; ///< Enables Clock Power Management; even if disabled, CLKREQ# signal can still be controlled by L1 PM substates mechanism + UINT8 PcieSpeed; ///< Contains speed of PCIe bus (see: PCIE_SPEED) + /** + (Test) + Forces LTR override to be permanent + The default way LTR override works is: + rootport uses LTR override values provided by BIOS until connected device sends an LTR message, then it will use values from the message + This settings allows force override of LTR mechanism. If it's enabled, then: + rootport will use LTR override values provided by BIOS forever; LTR messages sent from connected device will be ignored + **/ + PCIE_LTR_CONFIG PcieRpLtrConfig; ///< (Test) Latency Tolerance Reporting Policies including LTR limit and Override + /** + The number of milliseconds reference code will wait for link to exit Detect state for enabled ports + before assuming there is no device and potentially disabling the port. + It's assumed that the link will exit detect state before root port initialization (sufficient time + elapsed since PLTRST de-assertion) therefore default timeout is zero. However this might be useful + if device power-up seqence is controlled by BIOS or a specific device requires more time to detect. + In case of non-common clock enabled the default timout is 15ms. + Default: 0 + **/ + UINT16 DetectTimeoutMs; + UINT8 FormFactor; // Please check PCIE_FORM_FACTOR for supported values + UINT8 L1Low; ///< L1.LOW enable/disable. 0: Disable; 1: Enable. + UINT8 LinkDownGpios; + /// + /// 0: Use project default equalization settings; 1: Use equalization settings from PcieLinkEqPlatformSettings + /// + UINT8 OverrideEqualizationDefaults; + UINT8 Reserved[2]; + PCIE_LINK_EQ_PLATFORM_SETTINGS PcieGen3LinkEqPlatformSettings; ///< Global PCIe Gen3 link EQ settings that BIOS will use during PCIe link EQ for every port. + PCIE_LINK_EQ_PLATFORM_SETTINGS PcieGen4LinkEqPlatformSettings; ///< Global PCIe Gen4 link EQ settings that BIOS will use during PCIe link EQ for every port. + PCIE_LINK_EQ_PLATFORM_SETTINGS PcieGen5LinkEqPlatformSettings; ///< Global PCIe Gen5 link EQ settings that BIOS will use during PCIe link EQ for every port. +} PCIE_ROOT_PORT_COMMON_CONFIG; + +/** + PCIe Common Config + @note This structure will be expanded to hold all common PCIe policies between SA and PCH +**/ +typedef struct { + /** + RpFunctionSwap allows BIOS to use root port function number swapping when root port of function 0 is disabled. + A PCIE device can have higher functions only when Function0 exists. To satisfy this requirement, + BIOS will always enable Function0 of a device that contains more than 0 enabled root ports. + - Enabled: One of enabled root ports get assigned to Function0. + This offers no guarantee that any particular root port will be available at a specific DevNr:FuncNr location + - Disabled: Root port that corresponds to Function0 will be kept visible even though it might be not used. + That way rootport - to - DevNr:FuncNr assignment is constant. This option will impact ports 1, 9, 17. + NOTE: This option will not work if ports 1, 9, 17 are fused or configured for RST PCIe storage or disabled through policy + In other words, it only affects ports that would become hidden because they have no device connected. + NOTE: Disabling function swap may have adverse impact on power management. This option should ONLY + be used when each one of root ports 1, 9, 17: + - is configured as PCIe and has correctly configured ClkReq signal, or + - does not own any mPhy lanes (they are configured as SATA or USB) + **/ + UINT32 RpFunctionSwap : 1; + /** + Compliance Test Mode shall be enabled when using Compliance Load Board. + 0: Disable, 1: Enable + **/ + UINT32 ComplianceTestMode : 1; + UINT32 RsvdBits0 : 30; ///< Reserved bits + /// + /// (Test) This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; 1: Enable. + /// + UINT8 EnablePort8xhDecode; + UINT8 RsvdBytes0[3]; + /// + /// List of coefficients used during equalization (applicable to both software and hardware EQ) + /// Deprecated Policy + /// + PCIE_EQ_PARAM HwEqGen3CoeffList[PCIE_HWEQ_COEFFS_MAX]; +} PCIE_COMMON_CONFIG; + +typedef struct { + PCIE_EQ_PARAM HwEqGen3CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX]; + PCIE_EQ_PARAM HwEqGen4CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX]; + PCIE_EQ_PARAM HwEqGen5CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX]; +} PCIE_COMMON_CONFIG2; + + +/** + PCIe device table entry entry + + The PCIe device table is being used to override PCIe device ASPM settings. + To take effect table consisting of such entries must be instelled as PPI + on gPchPcieDeviceTablePpiGuid. + Last entry VendorId must be 0. +**/ +typedef struct { + UINT16 VendorId; ///< The vendor Id of Pci Express card ASPM setting override, 0xFFFF means any Vendor ID + UINT16 DeviceId; ///< The Device Id of Pci Express card ASPM setting override, 0xFFFF means any Device ID + UINT8 RevId; ///< The Rev Id of Pci Express card ASPM setting override, 0xFF means all steppings + UINT8 BaseClassCode; ///< The Base Class Code of Pci Express card ASPM setting override, 0xFF means all base class + UINT8 SubClassCode; ///< The Sub Class Code of Pci Express card ASPM setting override, 0xFF means all sub class + UINT8 EndPointAspm; ///< Override device ASPM (see: PCH_PCIE_ASPM_CONTROL) + ///< Bit 1 must be set in OverrideConfig for this field to take effect + UINT16 OverrideConfig; ///< The override config bitmap (see: PCH_PCIE_OVERRIDE_CONFIG). + /** + The L1Substates Capability Offset Override. (applicable if bit 2 is set in OverrideConfig) + This field can be zero if only the L1 Substate value is going to be override. + **/ + UINT16 L1SubstatesCapOffset; + /** + L1 Substate Capability Mask. (applicable if bit 2 is set in OverrideConfig) + Set to zero then the L1 Substate Capability [3:0] is ignored, and only L1s values are override. + Only bit [3:0] are applicable. Other bits are ignored. + **/ + UINT8 L1SubstatesCapMask; + /** + L1 Substate Port Common Mode Restore Time Override. (applicable if bit 2 is set in OverrideConfig) + L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue. + If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored, + and only L1SubstatesCapOffset is override. + **/ + UINT8 L1sCommonModeRestoreTime; + /** + L1 Substate Port Tpower_on Scale Override. (applicable if bit 2 is set in OverrideConfig) + L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue. + If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored, + and only L1SubstatesCapOffset is override. + **/ + UINT8 L1sTpowerOnScale; + /** + L1 Substate Port Tpower_on Value Override. (applicable if bit 2 is set in OverrideConfig) + L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue. + If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored, + and only L1SubstatesCapOffset is override. + **/ + UINT8 L1sTpowerOnValue; + + /** + SnoopLatency bit definition + Note: All Reserved bits must be set to 0 + + BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid + When clear values in bits 9:0 will be ignored + BITS[14:13] - Reserved + BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits + 000b - 1 ns + 001b - 32 ns + 010b - 1024 ns + 011b - 32,768 ns + 100b - 1,048,576 ns + 101b - 33,554,432 ns + 110b - Reserved + 111b - Reserved + BITS[9:0] - Snoop Latency Value. The value in these bits will be multiplied with + the scale in bits 12:10 + + This field takes effect only if bit 3 is set in OverrideConfig. + **/ + UINT16 SnoopLatency; + /** + NonSnoopLatency bit definition + Note: All Reserved bits must be set to 0 + + BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid + When clear values in bits 9:0 will be ignored + BITS[14:13] - Reserved + BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits + 000b - 1 ns + 001b - 32 ns + 010b - 1024 ns + 011b - 32,768 ns + 100b - 1,048,576 ns + 101b - 33,554,432 ns + 110b - Reserved + 111b - Reserved + BITS[9:0] - Non Snoop Latency Value. The value in these bits will be multiplied with + the scale in bits 12:10 + + This field takes effect only if bit 3 is set in OverrideConfig. + **/ + UINT16 NonSnoopLatency; + + /** + Forces LTR override to be permanent + The default way LTR override works is: + rootport uses LTR override values provided by BIOS until connected device sends an LTR message, then it will use values from the message + This settings allows force override of LTR mechanism. If it's enabled, then: + rootport will use LTR override values provided by BIOS forever; LTR messages sent from connected device will be ignored + **/ + UINT8 ForceLtrOverride; + UINT8 Reserved[3]; +} PCIE_DEVICE_OVERRIDE; + +#pragma pack (pop) +#endif // _PCIE_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h new file mode 100644 index 0000000000..fe0be3ec12 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h @@ -0,0 +1,36 @@ +/** @file + PCIe Config Block PreMem + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _PCIE_PREMEM_CONFIG_H_ +#define _PCIE_PREMEM_CONFIG_H_ + + +extern EFI_GUID gPciePreMemConfigGuid; + +#pragma pack (push,1) + +/** + PCIe IMR Config +**/ +typedef struct { + UINT8 ImrEnabled; ///< PCIe IMR. 0: Disable; 1: Enable. + UINT8 ImrRpLocation; ///< 0: PCH_PCIe; 1: CPU_PCIe. If PCIeImrEnabled is TRUE then this will use to select the Root port location from PCH PCIe or CPU PCIe.Refer PCIE_IMR_ROOT_PORT_LOCATION above + UINT16 ImrSize; ///< PCIe IMR size in megabytes + UINT8 ImrRpSelection; ///< Index of root port that is selected for PCIe IMR (0 based) + UINT8 Rsvd0[3]; +} PCIE_IMR_CONFIG; + +/** + PCIe Pre-Memory Configuration + Revision 1: - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header + PCIE_IMR_CONFIG PcieImr; ///< IMR Configuration +} PCIE_PREMEM_CONFIG; + +#pragma pack (pop) +#endif // _PCIE_PREMEM_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h new file mode 100644 index 0000000000..35ecb53ed2 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h @@ -0,0 +1,76 @@ +/** @file + ADR policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ + +#ifndef _ADR_CONFIG_H_ +#define _ADR_CONFIG_H_ + +#include + +extern EFI_GUID gAdrConfigGuid; + +#pragma pack (push,1) + + +/** + ADR Source Enable +**/ +typedef union { + struct { + UINT32 Reserved1 : 1; + UINT32 AdrSrcPbo : 1; + UINT32 AdrSrcPmcUncErr : 1; + UINT32 AdrSrcPchThrm : 1; + UINT32 AdrSrcMePbo : 1; + UINT32 AdrSrcCpuThrm : 1; + UINT32 AdrSrcMegbl : 1; + UINT32 AdrSrcLtReset : 1; + UINT32 AdrSrcPmcWdt : 1; + UINT32 AdrSrcMeWdt : 1; + UINT32 AdrSrcPmcFw : 1; + UINT32 AdrSrcPchpwrFlr : 1; + UINT32 AdrSrcSyspwrFlr : 1; + UINT32 Reserved2 : 1; + UINT32 AdrSrcMiaUxsErr : 1; + UINT32 AdrSrcMiaUxErr : 1; + UINT32 AdrSrcCpuThrmWdt : 1; + UINT32 AdrSrcMeUncErr : 1; + UINT32 AdrSrcAdrGpio : 1; + UINT32 AdrSrcOcwdtNoicc : 1; + UINT32 AdrSrcOcwdtIcc : 1; + UINT32 AdrSrcCseHecUncErr : 1; + UINT32 AdrSrcPmcSramUncErr : 1; + UINT32 AdrSrcPmcIromParity : 1; + UINT32 AdrSrcPmcRfFusaErr : 1; + UINT32 Reserved3 : 4; + UINT32 AdrSrcPpbrParityErr : 1; + UINT32 Reserved4 : 2; + } Field; + UINT32 Value; +} ADR_SOURCE_ENABLE; + +/** + ADR Configuration + Revision 1: - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + UINT32 AdrEn : 2; ///< Determine if Adr is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE + UINT32 AdrTimerEn : 2; ///< Determine if Adr timer options are enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE + UINT32 AdrTimer1Val : 8; ///< Determines the Timeout value used for the ADR timer 1. A value of zero bypasses the timer + UINT32 AdrMultiplier1Val : 3; ///< Specifies the tick frequency upon which the timer 1 will increment. ADR_TIMER_SCALE should be used to encode values + UINT32 AdrTimer2Val : 8; ///< Determines the Timeout value used for the ADR timer 2. A value of zero bypasses the timer + UINT32 AdrMultiplier2Val : 3; ///< Specifies the tick frequency upon which the timer 2 will increment. ADR_TIMER_SCALE should be used to encode values + UINT32 AdrHostPartitionReset : 2; ///< Determine if Host Partition Reset is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE + UINT32 AdrSrcOverride : 1; ///< Check if default ADR sources will be overriten with custom 0: Not overwritten, 1: Overwritten + UINT32 AdrPlatAckEn : 2; ///< Determine if Platform Acknowledge is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE + UINT32 ReservedBits : 1; + ADR_SOURCE_ENABLE AdrSrcSel; ///< Determine which ADR sources are enabled - 0: Enabled, 1: Disabled +} ADR_CONFIG; + +#pragma pack (pop) + +#endif // _ADR_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h new file mode 100644 index 0000000000..0a2ae50e6a --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h @@ -0,0 +1,86 @@ +/** @file + Power Management policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _PM_CONFIG_H_ +#define _PM_CONFIG_H_ + +#include + +extern EFI_GUID gPmConfigGuid; + +#pragma pack (push,1) + +/** + Description of Global Reset Trigger/Event Mask register +**/ +typedef union { + struct { + UINT32 Reserved1 : 1; + UINT32 Pbo : 1; + UINT32 PmcUncErr : 1; + UINT32 PchThrm : 1; + UINT32 MePbo : 1; + UINT32 CpuThrm : 1; + UINT32 Megbl : 1; + UINT32 LtReset : 1; + UINT32 PmcWdt : 1; + UINT32 MeWdt : 1; + UINT32 PmcFw : 1; + UINT32 PchpwrFlr : 1; + UINT32 SyspwrFlr : 1; + UINT32 Reserved2 : 1; + UINT32 MiaUxsErr : 1; + UINT32 MiaUxErr : 1; + UINT32 CpuThrmWdt : 1; + UINT32 MeUncErr : 1; + UINT32 AdrGpio : 1; + UINT32 OcwdtNoicc : 1; + UINT32 OcwdtIcc : 1; + UINT32 CseHecUncErr : 1; + UINT32 PmcSramUncErr : 1; + UINT32 PmcIromParity : 1; + UINT32 PmcRfFusaErr : 1; + UINT32 Reserved3 : 4; + UINT32 PpbrParityErr : 1; + UINT32 Reserved4 : 2; + } Field; + UINT32 Value; +} PMC_GLOBAL_RESET_MASK; + +typedef union { + struct { + UINT32 HostResetTimeout : 1; + UINT32 SxEntryTimeout : 1; + UINT32 HostRstProm : 1; + UINT32 HsmbMsg : 1; + UINT32 Pmc3Strike : 1; + UINT32 FwGblrstScratch5 : 1; + UINT32 PmcDmaTimeout : 1; + UINT32 EspiType7 : 1; + UINT32 EspiType8 : 1; + UINT32 FwGblRstScratch10 : 1; + UINT32 FwGblRstScratch11 : 1; + UINT32 LpmFwErr : 1; + UINT32 BscanMode : 1; + UINT32 SlpLvlRspErr : 1; + UINT32 FwGblrstScratch15 : 1; + UINT32 FwGblrstScratch16 : 1; + UINT32 FwGblrstScratch17 : 1; + UINT32 FwGblrstScratch18 : 1; + UINT32 FwGblrstScratch19 : 1; + UINT32 FwGblrstScratch20 : 1; + UINT32 FwGblrstScratch21 : 1; + UINT32 FwGblrstScratch22 : 1; + UINT32 FwGblrstScratch23 : 1; + UINT32 Rsvd : 9; + } Field; + UINT32 Value; +} PMC_GLOBAL_RESET_MASK1; + + +#pragma pack (pop) + +#endif // _PM_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h new file mode 100644 index 0000000000..62f8303558 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h @@ -0,0 +1,37 @@ +/** @file + RTC policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _RTC_CONFIG_H_ +#define _RTC_CONFIG_H_ + +extern EFI_GUID gRtcConfigGuid; + +#pragma pack (push,1) + +/** + The RTC_CONFIG block describes the expected configuration of RTC configuration. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /** + When set, prevents RTC TS (BUC.TS) from being changed. + This BILD bit has different function compared to LPC/eSPI, SPI. + 0: Disabled; 1: Enabled + **/ + UINT32 BiosInterfaceLock : 1; + /** + When set, bytes 38h-3Fh in the upper 128bytes bank of RTC RAM are locked + and cannot be accessed. + Writes will be droipped and reads will not return any guaranteed data. + 0: Disabled; 1: Enabled + **/ + UINT32 MemoryLock : 1; + UINT32 RsvdBits0 : 30; +} RTC_CONFIG; + +#pragma pack (pop) + +#endif // _RTC_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h new file mode 100644 index 0000000000..b5c3b21606 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h @@ -0,0 +1,33 @@ +/** @file + Serial IO policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _SERIAL_IO_CONFIG_H_ +#define _SERIAL_IO_CONFIG_H_ + +extern EFI_GUID gSerialIoConfigGuid; + +#include + +#pragma pack (push,1) + +/** + The SERIAL_IO_CONFIG block provides the configurations to set the Serial IO controllers + + Revision 1: + - Inital version. + Revision 2: + - Modified SPI Config to support pinmux functionality. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + SERIAL_IO_SPI_CONFIG SpiDeviceConfig[PCH_MAX_SERIALIO_SPI_CONTROLLERS]; ///< SPI Configuration + SERIAL_IO_I2C_CONFIG I2cDeviceConfig[PCH_MAX_SERIALIO_I2C_CONTROLLERS]; ///< I2C Configuration + SERIAL_IO_UART_CONFIG UartDeviceConfig[PCH_MAX_SERIALIO_UART_CONTROLLERS]; ///< UART Configuration +} SERIAL_IO_CONFIG; + +#pragma pack (pop) + +#endif // _SERIAL_IO_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h new file mode 100644 index 0000000000..5b59f08df2 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h @@ -0,0 +1,105 @@ +/** @file + Si Config Block + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _SI_CONFIG_H_ +#define _SI_CONFIG_H_ + +#define SI_CONFIG_REVISION 1 + +extern EFI_GUID gSiConfigGuid; + + +#pragma pack (push,1) + +/** + The Silicon Policy allows the platform code to publish a set of configuration + information that the RC drivers will use to configure the silicon hardware. + + Revision 1: - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header + // + // Platform specific common policies that used by several silicon components. + // + UINT8 CsmFlag; ///< offset 28 CSM status flag.@deprecated. + /** + This is used to skip the SSID programming in silicon code. + When set to TRUE, silicon code will not do any SSID programming and platform code + needs to handle that by itself properly. + 0: FALSE, 1: TRUE + **/ + UINT8 SkipSsidProgramming; ///< offset 29 + UINT8 RsvdBytes0[2]; ///< offset 30 - 31 + /** + When SkipSsidProgramming is FALSE, silicon code will use this as default value + to program the SVID for all internal devices. + 0: use silicon default SVID 0x8086 , Non-zero: use customized SVID. + **/ + UINT16 CustomizedSvid; ///< offset 32 - 33 + /** + When SkipSsidProgramming is FALSE, silicon code will use this as default value + to program the Sid for all internal devices. + 0: use silicon default SSID 0x7270 , Non-zero: use customized SSID. + **/ + UINT16 CustomizedSsid; ///< offset 34 - 35 + UINT32 *SsidTablePtr; ///< offset 36 - 39 + /** + Number of valid enties in SsidTablePtr. + This is valid when SkipSsidProgramming is FALSE; + Default is 0. + **/ + UINT16 NumberOfSsidTableEntry; ///< offset 40 - 41 + UINT8 RsvdBytes1[2]; ///< offset 42 - 43 + /** + This is used to skip setting BIOS_DONE MSR during firmware update boot mode. + When set to TRUE and boot mode is BOOT_ON_FLASH_UPDATE, + skip setting BIOS_DONE MSR at EndofPei. + 0: FALSE, 1: TRUE + **/ + UINT8 SkipBiosDoneWhenFwUpdate; ///< Offset 44 + UINT8 RsvdBytes2[3]; ///< Offset 45 - 47 +} SI_CONFIG; + +#pragma pack (pop) + + +/// +/// Subsystem Vendor ID / Subsystem ID +/// +typedef struct { + UINT16 SubSystemVendorId; + UINT16 SubSystemId; +} SVID_SID_VALUE; + +// +// Below is to match PCI_SEGMENT_LIB_ADDRESS () which can directly send to PciSegmentRead/Write functions. +// +typedef struct { + union { + struct { + UINT32 Register:12; + UINT32 Function:3; + UINT32 Device:5; + UINT32 Bus:8; + UINT32 Reserved1:4; + UINT32 Segment:16; + UINT32 Reserved2:16; + } Bits; + UINT64 SegBusDevFuncRegister; + } Address; + SVID_SID_VALUE SvidSidValue; + UINT32 Reserved; +} SVID_SID_INIT_ENTRY; + + +typedef struct { + UINT32 SkipBus; + UINT32 SkipDevice; + UINT32 SkipFunction; +} SVID_SID_SKIP_TABLE; + +#endif // _SI_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h new file mode 100644 index 0000000000..584a0d4169 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h @@ -0,0 +1,63 @@ +/** @file + Si Config Block PreMem + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _SI_PREMEM_CONFIG_H_ +#define _SI_PREMEM_CONFIG_H_ + +#define SI_PREMEM_CONFIG_REVISION 1 + +extern EFI_GUID gSiPreMemConfigGuid; + +typedef enum { + ProbeTypeDisabled = 0x00, + ProbeTypeDciOob = 0x02, + ProbeType2WireDciOob = 0x06, + ProbeTypeManual = 0x07, + ProbeTypeMax +} PLATFORM_DEBUG_CONSENT_PROBE_TYPE; + +#pragma pack (push,1) +/** + The Silicon PreMem Policy allows the platform code to publish a set of configuration + information that the RC drivers will use to configure the silicon hardware. + + Revision 1: + - Initial version. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header + /** + Platform Debug Consent + As a main switch to enable platform debug capability and relevant settings with specified probe type. + Manual: Do not use Platform Debug Consent to override other debug-relevant policies, but the user must set each debug option manually, aimed at advanced users. + + PDC-dependent policies are listed: + DciPreMemConfig->DciEn + CpuTraceHubConfig->EnableMode + CpuTraceHubConfig->CpuTraceHubMemReg0Size + CpuTraceHubConfig->CpuTraceHubMemReg1Size + PchTraceHubPreMemConfig->EnableMode + PchTraceHubPreMemConfig->MemReg0Size + PchTraceHubPreMemConfig->MemReg1Size + + Note: DCI OOB (aka BSSB) uses CCA probe. + Refer to definition of PLATFORM_DEBUG_CONSENT_PROBE_TYPE + 0:Disabled; 2:DCI OOB (All + TraceHubs); 6:2-wire DCI OOB (Low power); 7:Manual + **/ + UINT32 PlatformDebugConsent : 4; /// offset 28 - 31 + UINT32 RsvdBits : 28; + /** + This is used to skip override boot mode during firmware update boot mode. + When set to TRUE and boot mode is BOOT_ON_FLASH_UPDATE, + skip setting boot mode to BOOT_WITH_FULL_CONFIGURATION in PEI memory init. + 0: FALSE, 1: TRUE + **/ + UINT8 SkipOverrideBootModeWhenFwUpdate; /// offset 32 + UINT8 RsvdBytes[3]; /// offset 33 - 35 +} SI_PREMEM_CONFIG; + +#pragma pack (pop) +#endif // _SI_PREMEM_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h new file mode 100644 index 0000000000..2fc724552b --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h @@ -0,0 +1,49 @@ +/** @file + Smbus policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _SMBUS_CONFIG_H_ +#define _SMBUS_CONFIG_H_ + +extern EFI_GUID gSmbusPreMemConfigGuid; + +#pragma pack (push,1) + +#define PCH_MAX_SMBUS_RESERVED_ADDRESS 128 + +/// +/// The SMBUS_CONFIG block lists the reserved addresses for non-ARP capable devices in the platform. +/// +typedef struct { + /** + Revision 1: Init version + **/ + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + /** + This member describes whether or not the SMBus controller of PCH should be enabled. + 0: Disable; 1: Enable. + **/ + UINT32 Enable : 1; + UINT32 ArpEnable : 1; ///< Enable SMBus ARP support, 0: Disable; 1: Enable. + UINT32 DynamicPowerGating : 1; ///< (Test) Disable or Enable Smbus dynamic power gating. + /// + /// (Test) SPD Write Disable, 0: leave SPD Write Disable bit; 1: set SPD Write Disable bit. + /// For security recommendations, SPD write disable bit must be set. + /// + UINT32 SpdWriteDisable : 1; + UINT32 SmbAlertEnable : 1; ///< Enable SMBus Alert pin (SMBALERT#). 0: Disabled, 1: Enabled. + UINT32 RsvdBits0 : 27; ///< Reserved bits + UINT16 SmbusIoBase; ///< SMBUS Base Address (IO space). Default is 0xEFA0. + UINT8 Rsvd0; ///< Reserved bytes + UINT8 NumRsvdSmbusAddresses; ///< The number of elements in the RsvdSmbusAddressTable. + /** + Array of addresses reserved for non-ARP-capable SMBus devices. + **/ + UINT8 RsvdSmbusAddressTable[PCH_MAX_SMBUS_RESERVED_ADDRESS]; +} PCH_SMBUS_PREMEM_CONFIG; + +#pragma pack (pop) + +#endif // _SMBUS_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h new file mode 100644 index 0000000000..45dc538064 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h @@ -0,0 +1,54 @@ +/** @file + FlashProtection policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _FLASH_PROTECTION_CONFIG_H_ +#define _FLASH_PROTECTION_CONFIG_H_ + +extern EFI_GUID gFlashProtectionConfigGuid; + +#pragma pack (push,1) + +// +// Flash Protection Range Register +// +#define PCH_FLASH_PROTECTED_RANGES 5 + +/** + Protected Flash Range +**/ +typedef struct { + UINT32 WriteProtectionEnable : 1; ///< Write or erase is blocked by hardware. 0: Disable; 1: Enable. + UINT32 ReadProtectionEnable : 1; ///< Read is blocked by hardware. 0: Disable; 1: Enable. + UINT32 RsvdBits : 30; ///< Reserved + /** + The address of the upper limit of protection + This is a left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for limit comparison + **/ + UINT16 ProtectedRangeLimit; + /** + The address of the upper limit of protection + This is a left shifted address by 12 bits with address bits 11:0 are assumed to be 0 + **/ + UINT16 ProtectedRangeBase; +} PROTECTED_RANGE; + +/** + The PCH provides a method for blocking writes and reads to specific ranges + in the SPI flash when the Protected Ranges are enabled. + PROTECTED_RANGE is used to specify if flash protection are enabled, + the write protection enable bit and the read protection enable bit, + and to specify the upper limit and lower base for each register + Platform code is responsible to get the range base by PchGetSpiRegionAddresses routine, + and set the limit and base accordingly. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + PROTECTED_RANGE ProtectRange[PCH_FLASH_PROTECTED_RANGES]; ///< Protected Flash Ranges +} PCH_FLASH_PROTECTION_CONFIG; + +#pragma pack (pop) + +#endif // _FLASH_PROTECTION_CONFIG_H_ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h new file mode 100644 index 0000000000..95bcaaa951 --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h @@ -0,0 +1,71 @@ +/** @file + TCSS PEI policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _TCSS_PEI_CONFIG_H_ +#define _TCSS_PEI_CONFIG_H_ + +#include + +extern EFI_GUID gTcssPeiConfigGuid; + +#pragma pack (push,1) + + +#define MAX_IOM_AUX_BIAS_COUNT 4 + +/// +/// The IOM_AUX_ORI_PAD_CONFIG describes IOM TypeC port map GPIO pin. +/// Those GPIO setting for DP Aux Orientation Bias Control when the TypeC port didn't have re-timer. +/// IOM needs know Pull-Up and Pull-Down pin for Bias control +/// +typedef struct { + UINT32 GpioPullN; ///< GPIO Pull Up Ping number that is for IOM indecate the pull up pin from TypeC port. + UINT32 GpioPullP; ///< GPIO Pull Down Ping number that is for IOM indecate the pull down pin from TypeC port. +} IOM_AUX_ORI_PAD_CONFIG; + +/// +/// The IOM_EC_INTERFACE_CONFIG block describes interaction between BIOS and IOM-EC. +/// + +typedef struct { + UINT32 VccSt; ///< IOM VCCST request. (Not equal to actual VCCST value) + UINT32 UsbOverride; ///< IOM to override USB connection. + UINT32 D3ColdEnable; ///< Enable/disable D3 Cold support in TCSS + UINT32 D3HotEnable; ///< Enable/disable D3 Hot support in TCSS +} IOM_INTERFACE_CONFIG; + +/// +/// The PMC_INTERFACE_CONFIG block describes interaction between BIOS and PMC +/// +typedef struct { + UINT8 PmcPdEnable; ///< PMC PD Solution Enable + UINT8 Rsvd[3]; +} PMC_INTERFACE_CONFIG; + +/// +/// The TCSS_IOM_PEI_CONFIG block describes IOM Aux/HSL override settings for TCSS. +/// +typedef struct { + UINT16 AuxOri; ///< Bits defining value for IOM Aux Orientation Register + UINT16 HslOri; ///< Bits defining value for IOM HSL Orientation Register +} TCSS_IOM_ORI_OVERRIDE; + +/// +/// The TCSS_IOM_PEI_CONFIG block describes IOM settings for TCSS. +/// +typedef struct { + IOM_AUX_ORI_PAD_CONFIG IomAuxPortPad[MAX_IOM_AUX_BIAS_COUNT]; ///< The IOM_AUX_ORI_BIAS_CTRL port config setting. + TCSS_IOM_ORI_OVERRIDE IomOverrides; + IOM_INTERFACE_CONFIG IomInterface; ///< Config settings are BIOS <-> IOM interface. + PMC_INTERFACE_CONFIG PmcInterface; ///< Config settings for BIOS <-> PMC interface + UINT8 TcStateLimit; ///< Tcss C-State deep stage + UINT8 Reserved[3]; ///< Reserved bytes for future use +} TCSS_IOM_PEI_CONFIG; + + +#pragma pack (pop) + +#endif /* _TCSS_PEI_CONFIG_H_ */ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h new file mode 100644 index 0000000000..37e6439abb --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h @@ -0,0 +1,60 @@ +/** @file + VMD PEI policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _VMD_PEI_CONFIG_H_ +#define _VMD_PEI_CONFIG_H_ + +#include + +#pragma pack (push,1) + +#define VMD_MAX_DEVICES 31 + +typedef struct { + UINT8 RpBus; + UINT8 RpDevice; + UINT8 RpFunction; + UINT8 RpEnable; +} RP_BDF_DATA; + +/** + This configuration block is to configure VMD related variables used in PostMem PEI. + If VMD Device is not supported, all policies can be ignored. + Revision 1: + - Initial version. + Revision 2: + - Deprecated VmdPortAEnable, VmdPortBEnable, VmdPortCEnable, VmdPortDEnable. + - Added VmdPortEnable[VMD_MAX_DEVICES] and structure to hold Vmd EFI Variable details. + (Added B/D/F fields along with Port Enable for up to max 31 devices). + Revision 3: + Added policy to get the Bar values from platform PCD. + Revision 4: Added VmdGlobalMapping to map all the storage devices under VMD +**/ + +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header + UINT8 VmdEnable; ///< Offset 28 This field used to enable VMD controller 1=Enable 0=Disable(default) + UINT8 VmdPortAEnable; /// Deprecated < Offset 29 This field used to enable VMD portA Support 1=Enable and 0=Disable (default) + UINT8 VmdPortBEnable; /// Deprecated < Offset 30 This field used to enable VMD portB Support 1=Enable and 0=Disable (default) + UINT8 VmdPortCEnable; /// Deprecated < Offset 31 This field used to enable VMD portC Support 1=Enable and 0=Disable (default) + UINT8 VmdPortDEnable; /// Deprecated < Offset 32 This field used to enable VMD portD Support 1=Enable and 0=Disable (default) + UINT8 VmdCfgBarSize; ///< Offset 33 This is used to set the VMD Config Bar Size. 25(32MB) + UINT8 VmdCfgBarAttr; ///< Offset 34 This is used to set VMD Config Bar Attributes 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_PREFETCH, 2: VMD_64BIT_NONPREFETCH(Default) + UINT8 VmdMemBarSize1; ///< Offset 35 This is used to set the VMD Mem Bar1 size. 25 (32MB). + UINT8 VmdMemBar1Attr; ///< Offset 36 This is used to set VMD Mem Bar1 Attributes 0: VMD_32BIT_NONPREFETCH(Default) 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH + UINT8 VmdMemBarSize2; ///< Offset 37 This is used to set the VMD Mem Bar2 size. 20(1MB). + UINT8 VmdMemBar2Attr; ///< Offset 38 This is used to set VMD Mem Bar2 Attributes 0: VMD_32BIT_NONPREFETCH 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH + UINT8 VmdGlobalMapping; ///< Offset 39 This field used to enable Global Mapping 1=Enable 0=Disable(default) + RP_BDF_DATA VmdPortEnable[VMD_MAX_DEVICES]; ///< Offset 40 to 163 This field used to to store b/d/f for each root port along with enable Support 1=Enable 0=Disable (default) + VOID *VmdVariablePtr; /// This config block will be updated as per the EFI variable. + UINT32 VmdCfgBarBase; /// Temp Address VMD CFG BAR Default is 0xA0000000 + UINT32 VmdMemBar1Base; /// Temp Address VMD CFG BAR Default is 0xA2000000 + UINT32 VmdMemBar2Base; /// Temp Address VMD CFG BAR Default is 0xA4000000 +} VMD_PEI_CONFIG; + +#pragma pack (pop) + +#endif /* _VMD_PEI_PREMEM_CONFIG_H_ */ diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h new file mode 100644 index 0000000000..ad17488ecc --- /dev/null +++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h @@ -0,0 +1,30 @@ +/** @file + WatchDog policy + + Copyright (c) 2022, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent +**/ +#ifndef _WATCH_DOG_CONFIG_H_ +#define _WATCH_DOG_CONFIG_H_ + +extern EFI_GUID gWatchDogPreMemConfigGuid; + +#pragma pack (push,1) + +/** + This policy clears status bits and disable watchdog, then lock the + WDT registers. + while WDT is designed to be disabled and locked by Policy, + bios should not enable WDT by WDT PPI. In such case, bios shows the + warning message but not disable and lock WDT register to make sure + WDT event trigger correctly. +**/ +typedef struct { + CONFIG_BLOCK_HEADER Header; ///< Config Block Header + UINT32 DisableAndLock : 1; ///< (Test) Set 1 to clear WDT status, then disable and lock WDT registers. 0: Disable; 1: Enable. + UINT32 RsvdBits : 31; +} PCH_WDT_PREMEM_CONFIG; + +#pragma pack (pop) + +#endif // _WATCH_DOG_CONFIG_H_ -- 2.36.1.windows.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#108619): https://edk2.groups.io/g/devel/message/108619 Mute This Topic: https://groups.io/mt/101347732/7686176 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io] -=-=-=-=-=-=-=-=-=-=-=-