public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Ard Biesheuvel" <ard.biesheuvel@arm.com>
To: Andrei Warkentin <awarkentin@vmware.com>,
	"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "leif@nuviainc.com" <leif@nuviainc.com>,
	"andrey.warkentin@gmail.com" <andrey.warkentin@gmail.com>
Subject: Re: [edk2-devel] [PATCH edk2-platforms 1/1] Silicon/Socionext/SynQuacer: use Generic Event Device for power button
Date: Sat, 16 May 2020 00:20:24 +0200	[thread overview]
Message-ID: <b4d26d82-0abf-e476-2222-fca12d3553a6@arm.com> (raw)
In-Reply-To: <BN6PR05MB3411DDEEE370284E792D34F4B9BD0@BN6PR05MB3411.namprd05.prod.outlook.com>

On 5/15/20 10:00 PM, Andrei Warkentin wrote:
> I've not tested this, but it looks good. You wouldn't happen to have a 
> capsule handy that I or others could try?
> 

Sure.

https://people.linaro.org/~ard.biesheuvel/SYNQUACERFIRMWAREUPDATECAPSULEFMPPKCS7.Cap

> Is there any value behind explicitly testing for the right pin in _EVT? 
> Just to be patently obvious that this is where the demux could happen to 
> trigger other events (just building on top of yesterday's discussion)
> 

Not really. This SoC has 32 individual SPIs for the GPIO interrupt 
block, and so no demuxing is necessary. I was going to use the _E98 
method instead, but it turned out it was not implemented in Linux yet 
[0], so that is why I am using _EVT.

> Regardless - Reviewed-by: Andrey Warkentin <andrey.warkentin@gmail.com>

Thanks


[0] 
https://lore.kernel.org/linux-acpi/20200515093613.18691-1-ardb@kernel.org/

> ------------------------------------------------------------------------
> *From:* devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Ard 
> Biesheuvel via groups.io <ard.biesheuvel=arm.com@groups.io>
> *Sent:* Friday, May 15, 2020 3:32 AM
> *To:* devel@edk2.groups.io <devel@edk2.groups.io>
> *Cc:* leif@nuviainc.com <leif@nuviainc.com>; andrey.warkentin@gmail.com 
> <andrey.warkentin@gmail.com>; Ard Biesheuvel <ard.biesheuvel@arm.com>
> *Subject:* [edk2-devel] [PATCH edk2-platforms 1/1] 
> Silicon/Socionext/SynQuacer: use Generic Event Device for power button
> Drop the description of the interrupt handling part of the GPIO
> controller, and use a ACPI0013 Generic Event device instead to
> handle the power button event. This way, an OS can handle these
> events without the need for a SoC specific driver.
> 
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
>   Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl | 52 ++++++++++++--------
>   1 file changed, 31 insertions(+), 21 deletions(-)
> 
> diff --git a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl 
> b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl
> index f6ff3988aa91..3cfd025fbc16 100644
> --- a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl
> +++ b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl
> @@ -196,18 +196,40 @@ DefinitionBlock ("DsdtTable.aml", "DSDT", 1, 
> "SNI", "SYNQUACR",
>         })
>       }
> 
> -    Device (EXIU) {
> -      Name (_HID, "SCX0008")
> +    Device (GED0) {
> +      Name (_HID, "ACPI0013")
>         Name (_UID, Zero)
>         Name (_CRS, ResourceTemplate () {
> -        Memory32Fixed (ReadWrite, SYNQUACER_EXIU_BASE, SYNQUACER_EXIU_SIZE)
> -      })
> -      Name (_DSD, Package () {
> -        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> -        Package () {
> -          Package () { "socionext,spi-base", 112 },
> -        }
> +       Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake) 
> { 152 }
>         })
> +      OperationRegion (EXIU, SystemMemory, SYNQUACER_EXIU_BASE, 0x20)
> +      Field (EXIU, DWordAcc, NoLock, Preserve)
> +      {
> +          MASK,   32,
> +          SRCS,   32,
> +          REQS,   32,
> +          RAWR,   32,
> +          REQC,   32,
> +          LEVL,   32,
> +          EDGC,   32,
> +          SWIR,   32,
> +      }
> +
> +      Method (_INI) {
> +        REQC = 0xffffffff
> +        MASK = 0xffffffff
> +
> +        /* enable the power button on line 8 as edge active low */
> +        LEVL &= ~0x100
> +        EDGC |= 0x100
> +        REQC = 0x100
> +        MASK = 0xfffffeff
> +      }
> +
> +      Method (_EVT) {
> +        REQC = 0x100
> +        Notify (\_SB.PWRB, 0x80)
> +      }
>       }
> 
>       Device (GPIO) {
> @@ -215,9 +237,6 @@ DefinitionBlock ("DsdtTable.aml", "DSDT", 1, "SNI", 
> "SYNQUACR",
>         Name (_UID, Zero)
>         Name (_CRS, ResourceTemplate () {
>           Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, 
> SYNQUACER_GPIO_SIZE)
> -        Interrupt (ResourceConsumer, Edge, ActiveLow, ExclusiveAndWake, 
> 0, "\\_SB.EXIU") {
> -          8,
> -        }
>         })
>         Name (_DSD, Package () {
>           ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> @@ -237,15 +256,6 @@ DefinitionBlock ("DsdtTable.aml", "DSDT", 1, "SNI", 
> "SYNQUACR",
>             }
>           }
>         })
> -      Name (_AEI, ResourceTemplate () {
> -        GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullDefault, 0, 
> "\\_SB.GPIO")
> -        {
> -          8
> -        }
> -      })
> -      Method (_E08) {
> -        Notify (\_SB.PWRB, 0x80)
> -      }
>       }
> 
>       Device (PWRB) {
> -- 
> 2.17.1
> 
> 
> 
> 


  reply	other threads:[~2020-05-15 22:20 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15  8:32 [PATCH edk2-platforms 1/1] Silicon/Socionext/SynQuacer: use Generic Event Device for power button Ard Biesheuvel
2020-05-15 20:00 ` [edk2-devel] " Andrei Warkentin
2020-05-15 22:20   ` Ard Biesheuvel [this message]
2020-05-17 11:03   ` Ard Biesheuvel
2020-05-18 17:20 ` Leif Lindholm
2020-05-19 12:30   ` [edk2-devel] " Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b4d26d82-0abf-e476-2222-fca12d3553a6@arm.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox