From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga11.intel.com (mga11.intel.com [192.55.52.93]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 97F9D81E88 for ; Tue, 22 Nov 2016 17:58:22 -0800 (PST) Received: from orsmga005.jf.intel.com ([10.7.209.41]) by fmsmga102.fm.intel.com with ESMTP; 22 Nov 2016 17:58:22 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.31,535,1473145200"; d="scan'208";a="34571682" Received: from shwdeftian.ccr.corp.intel.com ([10.239.158.36]) by orsmga005.jf.intel.com with ESMTP; 22 Nov 2016 17:58:21 -0800 From: Feng Tian To: edk2-devel@lists.01.org Cc: Star Zeng , Baraneedharan Anbazhagan Date: Wed, 23 Nov 2016 09:58:05 +0800 Message-Id: X-Mailer: git-send-email 2.7.1.windows.2 Subject: [patch] MdeModulePkg/Xhci: Add 10ms delay before sending SendAddr cmd to dev X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 23 Nov 2016 01:58:22 -0000 We send ADDRESS DEVICE CMD in XhcInitializeDeviceSlot(), which will cause XHC issue a USB SET_ADDRESS request to the USB Device. According to USB spec, there should have a 10ms delay before this operation after resetting a given port. But in original code, there is a possible path which may have no such 10ms delay: UsbHubResetPort()->UsbHubSetPortFeature()->Stall(20)->UsbHubGetPortSt atus()->XhcPollPortStatusChange()->(if RESET_C bit is set)-> XhcInitializeDeviceSlot()->(if RESET_C bit is set)->Stall(10) So this patch is used to fix above issue. Cc: Star Zeng Cc: Baraneedharan Anbazhagan Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian Tested-by: Baraneedharan Anbazhagan --- MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h | 7 ++++++- MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 10 +++++++++- MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h | 8 +++++++- MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c | 10 +++++++++- 4 files changed, 31 insertions(+), 4 deletions(-) diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h index 06cc73c..28e2402 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h @@ -2,7 +2,7 @@ Provides some data structure definitions used by the XHCI host controller driver. -Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -61,6 +61,11 @@ typedef struct _USB_DEV_CONTEXT USB_DEV_CONTEXT; // #define XHC_RESET_TIMEOUT (1000) // +// TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5. +// The unit is microsecond, setting it as 10ms. +// +#define XHC_RESET_RECOVERY_DELAY (10 * 1000) +// // XHC async transfer timer interval, set by experience. // The unit is 100us, takes 1ms as interval. // diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c index e37f674..4bec76a 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c @@ -2,7 +2,7 @@ XHCI transfer scheduling routines. -Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -2115,6 +2115,10 @@ XhcInitializeDeviceSlot ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + gBS->Stall (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr); @@ -2321,6 +2325,10 @@ XhcInitializeDeviceSlot64 ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + gBS->Stall (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT_64)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr); diff --git a/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h b/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h index ccf4dc2..99f0396 100644 --- a/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h +++ b/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h @@ -1,7 +1,7 @@ /** @file Private Header file for Usb Host Controller PEIM -Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2014 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions @@ -53,6 +53,12 @@ typedef struct _USB_DEV_CONTEXT USB_DEV_CONTEXT; #define XHC_RESET_TIMEOUT (1000) // +// TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5. +// The unit is microsecond, setting it as 10ms. +// +#define XHC_RESET_RECOVERY_DELAY (10 * 1000) + +// // Wait for root port state stable. // #define XHC_ROOT_PORT_STATE_STABLE (200 * XHC_1_MILLISECOND) diff --git a/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c index 7f554f5..7a63dab 100644 --- a/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c @@ -2,7 +2,7 @@ PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid which is used to enable recovery function from USB Drivers. -Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2014 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions @@ -1195,6 +1195,10 @@ XhcPeiInitializeDeviceSlot ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + MicroSecondDelay (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr); @@ -1402,6 +1406,10 @@ XhcPeiInitializeDeviceSlot64 ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + MicroSecondDelay (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT_64)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr); -- 2.7.1.windows.2