Re: [edk2-platforms][PATCH 0/2] Platform/Sgi: Update serial port usage

["Thomas Abraham" <thomas.abraham@arm.com>]

On 04/07/2022 17:59, Rohit Mathew wrote:
> Patch 433b5b1b0f7f ("Platform/Sgi: Route logs to different sets of
> consoles") setup the routing of console messages to a different set
> of UART ports. Following up with this change, this patch series updates
> the ACPI tables to route the console messages to the console UART and
> adds a device entry for the debug UART.
> 
> Link to github branch for the patches in this series -
> https://github.com/rohit-arm/edk2-platforms/tree/serial_port_acpi
> 
> Rohit Mathew (2):
>    Platform/Sgi: Update ACPI tables to use console UART
>    Platform/Sgi: Add serial debug controller to SSDT
> 
>   .../SgiPkg/AcpiTables/RdE1EdgeAcpiTables.inf    |  3 +++
>   .../SgiPkg/AcpiTables/RdN1EdgeAcpiTables.inf    |  3 +++
>   .../SgiPkg/AcpiTables/RdN1EdgeX2AcpiTables.inf  |  3 +++
>   .../ARM/SgiPkg/AcpiTables/RdN2AcpiTables.inf    |  3 +++
>   .../SgiPkg/AcpiTables/RdN2Cfg1AcpiTables.inf    |  3 +++
>   .../ARM/SgiPkg/AcpiTables/RdV1AcpiTables.inf    |  3 +++
>   .../ARM/SgiPkg/AcpiTables/RdV1McAcpiTables.inf  |  3 +++
>   .../ARM/SgiPkg/AcpiTables/Sgi575AcpiTables.inf  |  3 +++
>   Platform/ARM/SgiPkg/AcpiTables/Spcr.aslc        |  2 +-
>   Platform/ARM/SgiPkg/AcpiTables/SsdtRos.asl      | 17 ++++++++++++++++-
>   10 files changed, 41 insertions(+), 2 deletions(-)
> 

For this series -
Reviewed-by: Thomas Abraham <thomas.abraham@arm.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>

Thanks.