From: "Lendacky, Thomas" <thomas.lendacky@amd.com>
To: devel@edk2.groups.io
Cc: Brijesh Singh <brijesh.singh@amd.com>,
James Bottomley <jejb@linux.ibm.com>,
Jordan Justen <jordan.l.justen@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Ard Biesheuvel <ard.biesheuvel@arm.com>
Subject: [PATCH v3 11/15] OvmfPkg/MemEncryptSevLib: Make the MemEncryptSevLib available for SEC
Date: Thu, 7 Jan 2021 12:48:21 -0600 [thread overview]
Message-ID: <bc7fa76cc23784ab3f37356b6c10dfec61942c38.1610045305.git.thomas.lendacky@amd.com> (raw)
In-Reply-To: <cover.1610045305.git.thomas.lendacky@amd.com>
From: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In preparation for a new interface to be added to the MemEncryptSevLib
library that will be used in SEC, create an SEC version of the library.
This requires the creation of SEC specific files.
Some of the current MemEncryptSevLib functions perform memory allocations
which cannot be performed in SEC, so these interfaces will return an error
during SEC. Also, the current MemEncryptSevLib library uses some static
variables to optimize access to variables, which cannot be used in SEC.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf | 4 +-
OvmfPkg/Library/BaseMemEncryptSevLib/PeiMemEncryptSevLib.inf | 4 +-
OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLib.inf | 50 +++++++
OvmfPkg/Library/BaseMemEncryptSevLib/{MemEncryptSevLibInternal.c => PeiDxeMemEncryptSevLibInternal.c} | 0
OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLibInternal.c | 155 ++++++++++++++++++++
OvmfPkg/Library/BaseMemEncryptSevLib/X64/{VirtualMemory.c => PeiDxeVirtualMemory.c} | 0
OvmfPkg/Library/BaseMemEncryptSevLib/X64/SecVirtualMemory.c | 80 ++++++++++
7 files changed, 289 insertions(+), 4 deletions(-)
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf b/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf
index 837db0876184..4480e4cc7c89 100644
--- a/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf
+++ b/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf
@@ -31,11 +31,11 @@ [Packages]
[Sources]
DxeMemEncryptSevLibInternal.c
- MemEncryptSevLibInternal.c
+ PeiDxeMemEncryptSevLibInternal.c
[Sources.X64]
X64/MemEncryptSevLib.c
- X64/VirtualMemory.c
+ X64/PeiDxeVirtualMemory.c
X64/VirtualMemory.h
[Sources.IA32]
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/PeiMemEncryptSevLib.inf b/OvmfPkg/Library/BaseMemEncryptSevLib/PeiMemEncryptSevLib.inf
index c3cd046cb630..0697f1dab502 100644
--- a/OvmfPkg/Library/BaseMemEncryptSevLib/PeiMemEncryptSevLib.inf
+++ b/OvmfPkg/Library/BaseMemEncryptSevLib/PeiMemEncryptSevLib.inf
@@ -30,12 +30,12 @@ [Packages]
UefiCpuPkg/UefiCpuPkg.dec
[Sources]
- MemEncryptSevLibInternal.c
+ PeiDxeMemEncryptSevLibInternal.c
PeiMemEncryptSevLibInternal.c
[Sources.X64]
X64/MemEncryptSevLib.c
- X64/VirtualMemory.c
+ X64/PeiDxeVirtualMemory.c
X64/VirtualMemory.h
[Sources.IA32]
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLib.inf b/OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLib.inf
new file mode 100644
index 000000000000..7cd0111fe47b
--- /dev/null
+++ b/OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLib.inf
@@ -0,0 +1,50 @@
+## @file
+# Library provides the helper functions for SEV guest
+#
+# Copyright (c) 2020 Advanced Micro Devices. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 1.25
+ BASE_NAME = SecMemEncryptSevLib
+ FILE_GUID = 046388b4-430e-4e61-88f6-51ea21db2632
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = MemEncryptSevLib|SEC
+
+#
+# The following information is for reference only and not required by the build
+# tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ OvmfPkg/OvmfPkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[Sources]
+ SecMemEncryptSevLibInternal.c
+
+[Sources.X64]
+ X64/MemEncryptSevLib.c
+ X64/SecVirtualMemory.c
+ X64/VirtualMemory.h
+
+[Sources.IA32]
+ Ia32/MemEncryptSevLib.c
+
+[LibraryClasses]
+ BaseLib
+ CpuLib
+ DebugLib
+ PcdLib
+
+[FixedPcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/MemEncryptSevLibInternal.c b/OvmfPkg/Library/BaseMemEncryptSevLib/PeiDxeMemEncryptSevLibInternal.c
similarity index 100%
rename from OvmfPkg/Library/BaseMemEncryptSevLib/MemEncryptSevLibInternal.c
rename to OvmfPkg/Library/BaseMemEncryptSevLib/PeiDxeMemEncryptSevLibInternal.c
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLibInternal.c b/OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLibInternal.c
new file mode 100644
index 000000000000..56d8f3f3183f
--- /dev/null
+++ b/OvmfPkg/Library/BaseMemEncryptSevLib/SecMemEncryptSevLibInternal.c
@@ -0,0 +1,155 @@
+/** @file
+
+ Secure Encrypted Virtualization (SEV) library helper function
+
+ Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemEncryptSevLib.h>
+#include <Library/PcdLib.h>
+#include <Register/Amd/Cpuid.h>
+#include <Register/Amd/Msr.h>
+#include <Register/Cpuid.h>
+#include <Uefi/UefiBaseType.h>
+
+/**
+ Reads and sets the status of SEV features.
+
+ **/
+STATIC
+UINT32
+EFIAPI
+InternalMemEncryptSevStatus (
+ VOID
+ )
+{
+ UINT32 RegEax;
+ CPUID_MEMORY_ENCRYPTION_INFO_EAX Eax;
+ BOOLEAN ReadSevMsr;
+ SEC_SEV_ES_WORK_AREA *SevEsWorkArea;
+
+ ReadSevMsr = FALSE;
+
+ SevEsWorkArea = (SEC_SEV_ES_WORK_AREA *) FixedPcdGet32 (PcdSevEsWorkAreaBase);
+ if (SevEsWorkArea != NULL && SevEsWorkArea->EncryptionMask != 0) {
+ //
+ // The MSR has been read before, so it is safe to read it again and avoid
+ // having to validate the CPUID information.
+ //
+ ReadSevMsr = TRUE;
+ } else {
+ //
+ // Check if memory encryption leaf exist
+ //
+ AsmCpuid (CPUID_EXTENDED_FUNCTION, &RegEax, NULL, NULL, NULL);
+ if (RegEax >= CPUID_MEMORY_ENCRYPTION_INFO) {
+ //
+ // CPUID Fn8000_001F[EAX] Bit 1 (Sev supported)
+ //
+ AsmCpuid (CPUID_MEMORY_ENCRYPTION_INFO, &Eax.Uint32, NULL, NULL, NULL);
+
+ if (Eax.Bits.SevBit) {
+ ReadSevMsr = TRUE;
+ }
+ }
+ }
+
+ return ReadSevMsr ? AsmReadMsr32 (MSR_SEV_STATUS) : 0;
+}
+
+/**
+ Returns a boolean to indicate whether SEV-ES is enabled.
+
+ @retval TRUE SEV-ES is enabled
+ @retval FALSE SEV-ES is not enabled
+**/
+BOOLEAN
+EFIAPI
+MemEncryptSevEsIsEnabled (
+ VOID
+ )
+{
+ MSR_SEV_STATUS_REGISTER Msr;
+
+ Msr.Uint32 = InternalMemEncryptSevStatus ();
+
+ return Msr.Bits.SevEsBit ? TRUE : FALSE;
+}
+
+/**
+ Returns a boolean to indicate whether SEV is enabled.
+
+ @retval TRUE SEV is enabled
+ @retval FALSE SEV is not enabled
+**/
+BOOLEAN
+EFIAPI
+MemEncryptSevIsEnabled (
+ VOID
+ )
+{
+ MSR_SEV_STATUS_REGISTER Msr;
+
+ Msr.Uint32 = InternalMemEncryptSevStatus ();
+
+ return Msr.Bits.SevBit ? TRUE : FALSE;
+}
+
+/**
+ Returns the SEV encryption mask.
+
+ @return The SEV pagtable encryption mask
+**/
+UINT64
+EFIAPI
+MemEncryptSevGetEncryptionMask (
+ VOID
+ )
+{
+ CPUID_MEMORY_ENCRYPTION_INFO_EBX Ebx;
+ SEC_SEV_ES_WORK_AREA *SevEsWorkArea;
+ UINT64 EncryptionMask;
+
+ SevEsWorkArea = (SEC_SEV_ES_WORK_AREA *) FixedPcdGet32 (PcdSevEsWorkAreaBase);
+ if (SevEsWorkArea != NULL) {
+ EncryptionMask = SevEsWorkArea->EncryptionMask;
+ } else {
+ //
+ // CPUID Fn8000_001F[EBX] Bit 0:5 (memory encryption bit position)
+ //
+ AsmCpuid (CPUID_MEMORY_ENCRYPTION_INFO, NULL, &Ebx.Uint32, NULL, NULL);
+ EncryptionMask = LShiftU64 (1, Ebx.Bits.PtePosBits);
+ }
+
+ return EncryptionMask;
+}
+
+/**
+ Locate the page range that covers the initial (pre-SMBASE-relocation) SMRAM
+ Save State Map.
+
+ @param[out] BaseAddress The base address of the lowest-address page that
+ covers the initial SMRAM Save State Map.
+
+ @param[out] NumberOfPages The number of pages in the page range that covers
+ the initial SMRAM Save State Map.
+
+ @retval RETURN_SUCCESS BaseAddress and NumberOfPages have been set on
+ output.
+
+ @retval RETURN_UNSUPPORTED SMM is unavailable.
+**/
+RETURN_STATUS
+EFIAPI
+MemEncryptSevLocateInitialSmramSaveStateMapPages (
+ OUT UINTN *BaseAddress,
+ OUT UINTN *NumberOfPages
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/X64/VirtualMemory.c b/OvmfPkg/Library/BaseMemEncryptSevLib/X64/PeiDxeVirtualMemory.c
similarity index 100%
rename from OvmfPkg/Library/BaseMemEncryptSevLib/X64/VirtualMemory.c
rename to OvmfPkg/Library/BaseMemEncryptSevLib/X64/PeiDxeVirtualMemory.c
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/X64/SecVirtualMemory.c b/OvmfPkg/Library/BaseMemEncryptSevLib/X64/SecVirtualMemory.c
new file mode 100644
index 000000000000..5c337ea0b820
--- /dev/null
+++ b/OvmfPkg/Library/BaseMemEncryptSevLib/X64/SecVirtualMemory.c
@@ -0,0 +1,80 @@
+/** @file
+
+ Virtual Memory Management Services to set or clear the memory encryption bit
+
+ Copyright (c) 2020, AMD Incorporated. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/CpuLib.h>
+#include <Library/MemEncryptSevLib.h>
+
+#include "VirtualMemory.h"
+
+/**
+ This function clears memory encryption bit for the memory region specified by
+ PhysicalAddress and Length from the current page table context.
+
+ @param[in] Cr3BaseAddress Cr3 Base Address (if zero then use
+ current CR3)
+ @param[in] PhysicalAddress The physical address that is the start
+ address of a memory region.
+ @param[in] Length The length of memory region
+ @param[in] Flush Flush the caches before applying the
+ encryption mask
+
+ @retval RETURN_SUCCESS The attributes were cleared for the
+ memory region.
+ @retval RETURN_INVALID_PARAMETER Number of pages is zero.
+ @retval RETURN_UNSUPPORTED Clearing the memory encyrption attribute
+ is not supported
+**/
+RETURN_STATUS
+EFIAPI
+InternalMemEncryptSevSetMemoryDecrypted (
+ IN PHYSICAL_ADDRESS Cr3BaseAddress,
+ IN PHYSICAL_ADDRESS PhysicalAddress,
+ IN UINTN Length,
+ IN BOOLEAN Flush
+ )
+{
+ //
+ // This function is not available during SEC.
+ //
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ This function sets memory encryption bit for the memory region specified by
+ PhysicalAddress and Length from the current page table context.
+
+ @param[in] Cr3BaseAddress Cr3 Base Address (if zero then use
+ current CR3)
+ @param[in] PhysicalAddress The physical address that is the start
+ address of a memory region.
+ @param[in] Length The length of memory region
+ @param[in] Flush Flush the caches before applying the
+ encryption mask
+
+ @retval RETURN_SUCCESS The attributes were set for the memory
+ region.
+ @retval RETURN_INVALID_PARAMETER Number of pages is zero.
+ @retval RETURN_UNSUPPORTED Setting the memory encyrption attribute
+ is not supported
+**/
+RETURN_STATUS
+EFIAPI
+InternalMemEncryptSevSetMemoryEncrypted (
+ IN PHYSICAL_ADDRESS Cr3BaseAddress,
+ IN PHYSICAL_ADDRESS PhysicalAddress,
+ IN UINTN Length,
+ IN BOOLEAN Flush
+ )
+{
+ //
+ // This function is not available during SEC.
+ //
+ return RETURN_UNSUPPORTED;
+}
--
2.30.0
next prev parent reply other threads:[~2021-01-07 18:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-07 18:48 [PATCH v3 00/15] SEV-ES security mitigations Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 01/15] Ovmf/ResetVector: Simplify and consolidate the SEV features checks Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 02/15] OvmfPkg/Sec: Move SEV-ES SEC workarea definition to common header file Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 03/15] OvmfPkg/ResetVector: Validate the encryption bit position for SEV/SEV-ES Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 04/15] OvmfPkg/ResetVector: Perform a simple SEV-ES sanity check Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 05/15] OvmfPkg/ResetVector: Save the encryption mask at boot time Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 06/15] OvmfPkg/MemEncryptSevLib: Add an interface to retrieve the encryption mask Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 07/15] OvmfPkg: Obtain SEV encryption mask with the new MemEncryptSevLib API Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 08/15] OvmfPkg/AmdSevDxe: Clear encryption bit on PCIe MMCONFIG range Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 09/15] OvmfPkg/VmgExitLib: Check for an explicit DR7 cached value Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 10/15] OvmfPkg/MemEncryptSevLib: Coding style fixes in prep for SEC library Lendacky, Thomas
2021-01-07 18:48 ` Lendacky, Thomas [this message]
2021-01-07 19:08 ` [edk2-devel] [PATCH v3 11/15] OvmfPkg/MemEncryptSevLib: Make the MemEncryptSevLib available for SEC Laszlo Ersek
2021-01-07 18:48 ` [PATCH v3 12/15] OvmfPkg/MemEncryptSevLib: Address range encryption state interface Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 13/15] OvmfPkg/VmgExitLib: Support nested #VCs Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 14/15] OvmfPkg/PlatformPei: Reserve GHCB backup pages if S3 is supported Lendacky, Thomas
2021-01-07 18:48 ` [PATCH v3 15/15] OvfmPkg/VmgExitLib: Validate #VC MMIO is to un-encrypted memory Lendacky, Thomas
2021-01-07 19:41 ` [edk2-devel] [PATCH v3 00/15] SEV-ES security mitigations Laszlo Ersek
2021-01-07 19:50 ` Lendacky, Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bc7fa76cc23784ab3f37356b6c10dfec61942c38.1610045305.git.thomas.lendacky@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox