From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: devel@edk2.groups.io, ard.biesheuvel@linaro.org
Cc: leif.lindholm@linaro.org, lersek@redhat.com
Subject: Re: [edk2-devel] [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds
Date: Mon, 9 Sep 2019 16:13:58 +0200 [thread overview]
Message-ID: <be1dcacc-6392-3947-53b2-36632dd5f7aa@redhat.com> (raw)
In-Reply-To: <20190906222004.30161-1-ard.biesheuvel@linaro.org>
Hi Ard,
On 9/7/19 12:20 AM, Ard Biesheuvel wrote:
> After upgrading the CI system we use for building the ArmVirtPkg
> targets, we started seeing failures due to the NOOPT build running
> out of space when using the CLANG38 toolchain definition combined
> with clang 7.
>
> We really don't want to increase the FD/FV sizes in general to
> accommodate this, so parameterize the relevant quantities and
> increase them by 50% for NOOPT builds.
Why not by 100% directly?
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> ArmVirtPkg/ArmVirt.fdf.inc | 13 +++++++++++++
> ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++++---
> ArmVirtPkg/ArmVirtQemuKernel.fdf | 14 +++++++++++---
> ArmVirtPkg/ArmVirtXen.fdf | 14 +++++++++++---
> 4 files changed, 46 insertions(+), 9 deletions(-)
>
> diff --git a/ArmVirtPkg/ArmVirt.fdf.inc b/ArmVirtPkg/ArmVirt.fdf.inc
> new file mode 100644
> index 000000000000..5fdebcf5dc93
> --- /dev/null
> +++ b/ArmVirtPkg/ArmVirt.fdf.inc
> @@ -0,0 +1,13 @@
> +#
> +# Copyright (c) 2019, Linaro Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +
> +!if $(TARGET) != NOOPT
> +DEFINE FD_SIZE = 0x200000
> +DEFINE FD_NUM_BLOCKS = 0x200
> +!else
> +DEFINE FD_SIZE = 0x300000
> +DEFINE FD_NUM_BLOCKS = 0x300
> +!endif
> diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
> index c2169cb7964b..27dd5bf09a91 100644
> --- a/ArmVirtPkg/ArmVirtQemu.fdf
> +++ b/ArmVirtPkg/ArmVirtQemu.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -59,7 +67,7 @@ DATA = {
> !endif
> }
>
> -0x00001000|0x001ff000
> +0x00001000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> index f675b6d65ee1..1836697a0a90 100644
> --- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
> +++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -81,7 +89,7 @@ DATA = {
Don't you need to update the image_size in the kernel header layout?
0x00, 0x00, 0x20, 0x00 [,0x00, 0x00, 0x00, 0x00]
^^^^
> !endif
> }
>
> -0x00008000|0x001f8000
> +0x00008000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
> index 79f681cde028..4007f49a08fb 100644
> --- a/ArmVirtPkg/ArmVirtXen.fdf
> +++ b/ArmVirtPkg/ArmVirtXen.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
> +!endif
> +
> [FD.XEN_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -81,7 +89,7 @@ DATA = {
> !endif
> }
>
> -0x00002000|0x001fe000
> +0x00002000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
>
prev parent reply other threads:[~2019-09-09 14:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 22:20 [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
2019-09-09 13:42 ` Laszlo Ersek
2019-09-09 14:13 ` Philippe Mathieu-Daudé [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=be1dcacc-6392-3947-53b2-36632dd5f7aa@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox