* [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds
@ 2019-09-06 22:20 Ard Biesheuvel
2019-09-09 13:42 ` Laszlo Ersek
2019-09-09 14:13 ` [edk2-devel] " Philippe Mathieu-Daudé
0 siblings, 2 replies; 3+ messages in thread
From: Ard Biesheuvel @ 2019-09-06 22:20 UTC (permalink / raw)
To: devel; +Cc: leif.lindholm, lersek, Ard Biesheuvel
After upgrading the CI system we use for building the ArmVirtPkg
targets, we started seeing failures due to the NOOPT build running
out of space when using the CLANG38 toolchain definition combined
with clang 7.
We really don't want to increase the FD/FV sizes in general to
accommodate this, so parameterize the relevant quantities and
increase them by 50% for NOOPT builds.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
ArmVirtPkg/ArmVirt.fdf.inc | 13 +++++++++++++
ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++++---
ArmVirtPkg/ArmVirtQemuKernel.fdf | 14 +++++++++++---
ArmVirtPkg/ArmVirtXen.fdf | 14 +++++++++++---
4 files changed, 46 insertions(+), 9 deletions(-)
diff --git a/ArmVirtPkg/ArmVirt.fdf.inc b/ArmVirtPkg/ArmVirt.fdf.inc
new file mode 100644
index 000000000000..5fdebcf5dc93
--- /dev/null
+++ b/ArmVirtPkg/ArmVirt.fdf.inc
@@ -0,0 +1,13 @@
+#
+# Copyright (c) 2019, Linaro Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+
+!if $(TARGET) != NOOPT
+DEFINE FD_SIZE = 0x200000
+DEFINE FD_NUM_BLOCKS = 0x200
+!else
+DEFINE FD_SIZE = 0x300000
+DEFINE FD_NUM_BLOCKS = 0x300
+!endif
diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
index c2169cb7964b..27dd5bf09a91 100644
--- a/ArmVirtPkg/ArmVirtQemu.fdf
+++ b/ArmVirtPkg/ArmVirtQemu.fdf
@@ -20,14 +20,22 @@
#
################################################################################
+[Defines]
+!include ArmVirt.fdf.inc
+!if $(TARGET) != NOOPT
+DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
+!else
+DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
+!endif
+
[FD.QEMU_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
-NumBlocks = 0x200
+NumBlocks = $(FD_NUM_BLOCKS)
################################################################################
#
@@ -59,7 +67,7 @@ DATA = {
!endif
}
-0x00001000|0x001ff000
+0x00001000|$(FVMAIN_COMPACT_SIZE)
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
index f675b6d65ee1..1836697a0a90 100644
--- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
+++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
@@ -20,14 +20,22 @@
#
################################################################################
+[Defines]
+!include ArmVirt.fdf.inc
+!if $(TARGET) != NOOPT
+DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
+!else
+DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
+!endif
+
[FD.QEMU_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
-NumBlocks = 0x200
+NumBlocks = $(FD_NUM_BLOCKS)
################################################################################
#
@@ -81,7 +89,7 @@ DATA = {
!endif
}
-0x00008000|0x001f8000
+0x00008000|$(FVMAIN_COMPACT_SIZE)
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
index 79f681cde028..4007f49a08fb 100644
--- a/ArmVirtPkg/ArmVirtXen.fdf
+++ b/ArmVirtPkg/ArmVirtXen.fdf
@@ -20,14 +20,22 @@
#
################################################################################
+[Defines]
+!include ArmVirt.fdf.inc
+!if $(TARGET) != NOOPT
+DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
+!else
+DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
+!endif
+
[FD.XEN_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
+Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
-NumBlocks = 0x200
+NumBlocks = $(FD_NUM_BLOCKS)
################################################################################
#
@@ -81,7 +89,7 @@ DATA = {
!endif
}
-0x00002000|0x001fe000
+0x00002000|$(FVMAIN_COMPACT_SIZE)
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds
2019-09-06 22:20 [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
@ 2019-09-09 13:42 ` Laszlo Ersek
2019-09-09 14:13 ` [edk2-devel] " Philippe Mathieu-Daudé
1 sibling, 0 replies; 3+ messages in thread
From: Laszlo Ersek @ 2019-09-09 13:42 UTC (permalink / raw)
To: Ard Biesheuvel, devel; +Cc: leif.lindholm
On 09/07/19 00:20, Ard Biesheuvel wrote:
> After upgrading the CI system we use for building the ArmVirtPkg
> targets, we started seeing failures due to the NOOPT build running
> out of space when using the CLANG38 toolchain definition combined
> with clang 7.
>
> We really don't want to increase the FD/FV sizes in general to
> accommodate this, so parameterize the relevant quantities and
> increase them by 50% for NOOPT builds.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> ArmVirtPkg/ArmVirt.fdf.inc | 13 +++++++++++++
> ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++++---
> ArmVirtPkg/ArmVirtQemuKernel.fdf | 14 +++++++++++---
> ArmVirtPkg/ArmVirtXen.fdf | 14 +++++++++++---
> 4 files changed, 46 insertions(+), 9 deletions(-)
>
> diff --git a/ArmVirtPkg/ArmVirt.fdf.inc b/ArmVirtPkg/ArmVirt.fdf.inc
> new file mode 100644
> index 000000000000..5fdebcf5dc93
> --- /dev/null
> +++ b/ArmVirtPkg/ArmVirt.fdf.inc
> @@ -0,0 +1,13 @@
> +#
> +# Copyright (c) 2019, Linaro Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +
> +!if $(TARGET) != NOOPT
> +DEFINE FD_SIZE = 0x200000
> +DEFINE FD_NUM_BLOCKS = 0x200
> +!else
> +DEFINE FD_SIZE = 0x300000
> +DEFINE FD_NUM_BLOCKS = 0x300
> +!endif
> diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
> index c2169cb7964b..27dd5bf09a91 100644
> --- a/ArmVirtPkg/ArmVirtQemu.fdf
> +++ b/ArmVirtPkg/ArmVirtQemu.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -59,7 +67,7 @@ DATA = {
> !endif
> }
>
> -0x00001000|0x001ff000
> +0x00001000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> index f675b6d65ee1..1836697a0a90 100644
> --- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
> +++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -81,7 +89,7 @@ DATA = {
> !endif
> }
>
> -0x00008000|0x001f8000
> +0x00008000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
> index 79f681cde028..4007f49a08fb 100644
> --- a/ArmVirtPkg/ArmVirtXen.fdf
> +++ b/ArmVirtPkg/ArmVirtXen.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
> +!endif
> +
> [FD.XEN_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -81,7 +89,7 @@ DATA = {
> !endif
> }
>
> -0x00002000|0x001fe000
> +0x00002000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
>
(1) I suggest not introducing the new file "ArmVirt.fdf.inc". Instead,
the same DEFINEs could go into the [Defines] section of
"ArmVirt.dsc.inc".
This is because the platform build is rooted in the DSC file, and the
FDF file is only reached because the DSC has a pointer to it (the
FLASH_DEFINITION define). Therefore, whatever DEFINE we add to the DSC,
the FDF should see it.
And, all platform DSCs include "ArmVirt.dsc.inc".
Furthermore, we already have a (small) [Defines] section in
"ArmVirt.dsc.inc".
(2) Can we control this feature with an orthogonal flag?
-D FD_SIZE_3MB
In fact, tailoring the pattern seen under OvmfPkg, we could add the
following to "ArmVirt.dsc.inc":
#
# Flash size selection. Setting FD_SIZE_IN_KB on the command line directly to
# one of the supported values, in place of any of the convenience macros, is
# permitted.
#
!ifdef $(FD_SIZE_2MB)
DEFINE FD_SIZE_IN_KB = 2048
!else
!ifdef $(FD_SIZE_3MB)
DEFINE FD_SIZE_IN_KB = 3072
!else
DEFINE FD_SIZE_IN_KB = 2048
!endif
!endif
And then the conditionals would change from
!if $(TARGET) != NOOPT
...
!else
...
!endif
to
!if $(FD_SIZE_IN_KB) == 2048
...
!endif
!if $(FD_SIZE_IN_KB) == 3072
...
!endif
I would like that approach because:
- you could add the new flag in your CI env, without changing behavior
for other NOOPT builds (-D FD_SIZE_3MB, or -D FD_SIZE_IN_KB=3072)
- adding further FD size options would be quite clean (only one place to
mess with "!else").
Otherwise, the patch looks fine to me.
Thanks!
Laszlo
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [edk2-devel] [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds
2019-09-06 22:20 [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
2019-09-09 13:42 ` Laszlo Ersek
@ 2019-09-09 14:13 ` Philippe Mathieu-Daudé
1 sibling, 0 replies; 3+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-09-09 14:13 UTC (permalink / raw)
To: devel, ard.biesheuvel; +Cc: leif.lindholm, lersek
Hi Ard,
On 9/7/19 12:20 AM, Ard Biesheuvel wrote:
> After upgrading the CI system we use for building the ArmVirtPkg
> targets, we started seeing failures due to the NOOPT build running
> out of space when using the CLANG38 toolchain definition combined
> with clang 7.
>
> We really don't want to increase the FD/FV sizes in general to
> accommodate this, so parameterize the relevant quantities and
> increase them by 50% for NOOPT builds.
Why not by 100% directly?
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> ArmVirtPkg/ArmVirt.fdf.inc | 13 +++++++++++++
> ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++++---
> ArmVirtPkg/ArmVirtQemuKernel.fdf | 14 +++++++++++---
> ArmVirtPkg/ArmVirtXen.fdf | 14 +++++++++++---
> 4 files changed, 46 insertions(+), 9 deletions(-)
>
> diff --git a/ArmVirtPkg/ArmVirt.fdf.inc b/ArmVirtPkg/ArmVirt.fdf.inc
> new file mode 100644
> index 000000000000..5fdebcf5dc93
> --- /dev/null
> +++ b/ArmVirtPkg/ArmVirt.fdf.inc
> @@ -0,0 +1,13 @@
> +#
> +# Copyright (c) 2019, Linaro Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +
> +!if $(TARGET) != NOOPT
> +DEFINE FD_SIZE = 0x200000
> +DEFINE FD_NUM_BLOCKS = 0x200
> +!else
> +DEFINE FD_SIZE = 0x300000
> +DEFINE FD_NUM_BLOCKS = 0x300
> +!endif
> diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
> index c2169cb7964b..27dd5bf09a91 100644
> --- a/ArmVirtPkg/ArmVirtQemu.fdf
> +++ b/ArmVirtPkg/ArmVirtQemu.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -59,7 +67,7 @@ DATA = {
> !endif
> }
>
> -0x00001000|0x001ff000
> +0x00001000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> index f675b6d65ee1..1836697a0a90 100644
> --- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
> +++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -81,7 +89,7 @@ DATA = {
Don't you need to update the image_size in the kernel header layout?
0x00, 0x00, 0x20, 0x00 [,0x00, 0x00, 0x00, 0x00]
^^^^
> !endif
> }
>
> -0x00008000|0x001f8000
> +0x00008000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
> index 79f681cde028..4007f49a08fb 100644
> --- a/ArmVirtPkg/ArmVirtXen.fdf
> +++ b/ArmVirtPkg/ArmVirtXen.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!include ArmVirt.fdf.inc
> +!if $(TARGET) != NOOPT
> +DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
> +!else
> +DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
> +!endif
> +
> [FD.XEN_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -81,7 +89,7 @@ DATA = {
> !endif
> }
>
> -0x00002000|0x001fe000
> +0x00002000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-09 14:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-06 22:20 [PATCH] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
2019-09-09 13:42 ` Laszlo Ersek
2019-09-09 14:13 ` [edk2-devel] " Philippe Mathieu-Daudé
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox