Hello Maciej:
The ports numbers from 0 to 1023 are having
specific roles.
Ex: 80 for
HTTTP, 443 for HTTPS.
In the case can
we set Min as 1024 and Max as
65535.
Thanks
Siva
Hi Siva,
What seems to be the problem at hand? What kind of range of
values for TargetPort do you propose?
TARGET_PORT_MIN/MAX_NUM refer to a range of values (0-65535)
that be set in TargetPort field in iSCSI HII. 3260 is a
default TCP port for iSCSI.
I see nothing wrong with that.
Thanks,
Maciej
On 31-Aug-20 11:05, Sivaraman Nainar
wrote:
Rabeda:
Could you
please provide your comment on this.
-Siva
Jiaxin:
Can you
please comment on the below query.
-Siva
Hello all:
In the ISCSI driver, Target TCP Port
Input shows the default port as 3260. Which can be set
from 0 to 65535
As per
below RFC it talks about the Default Port only. Still it
not clearly said if we can use the numbers 49152-65535
which is reserved.
https://tools.ietf.org/html/rfc3720
13. IANA Considerations
This section conforms to [RFC2434].
The well-known user TCP port number for iSCSI connections
assigned by
IANA is 3260 and this is the default iSCSI port.
Implementations
needing a system TCP port number may use port 860, the
port assigned
by IANA as the iSCSI system port; however in order to use
port 860,
it MUST be explicitly specified - implementations MUST NOT
default to
use of port 860, as 3260 is the only allowed default.
with my understanding, it wouid be good if we can change
the below Min and MAX port number ranges with right
ranges.
#define TARGET_PORT_MIN_NUM 0
#define TARGET_PORT_MAX_NUM 65535
Thanks
Siva
This e-mail is intended
for the use of the addressee only and may contain
privileged, confidential, or proprietary information that
is exempt from disclosure under law. If you have received
this message in error, please inform us promptly by reply
e-mail, then delete the e-mail and destroy any printed
copy. Thank you.