From: "Huangming (Mark)" <huangming23@huawei.com>
To: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ming Huang <heyi.guo@linaro.org>, <linaro-uefi@lists.linaro.org>,
<edk2-devel@lists.01.org>, <graeme.gregory@linaro.org>,
<ard.biesheuvel@linaro.org>, <guoheyi@huawei.com>,
<wanghuiqiang@huawei.com>, <zhangjinsong2@huawei.com>,
<mengfanrong@huawei.com>, <huangdaode@hisilicon.com>,
<waip23@126.com>
Subject: Re: [PATCH edk2-platforms v2 05/15] Hisilicon D03/D05: Add capsule upgrade support
Date: Wed, 31 Jan 2018 09:14:13 +0800 [thread overview]
Message-ID: <c949c862-e4bf-db33-2733-413f0b7c2aaf@huawei.com> (raw)
In-Reply-To: <20180130132125.h3nwz4b3yjyeyeik@bivouac.eciton.net>
On 2018/1/30 21:21, Leif Lindholm wrote:
> On Tue, Jan 30, 2018 at 08:48:27PM +0800, Huangming (Mark) wrote:
>>
>>
>> On 2018/1/30 3:58, Leif Lindholm wrote:
>>> A few style comments below.
>>>
>>> On Fri, Jan 26, 2018 at 04:00:40PM +0800, Ming Huang wrote:
>>>> From: Jason Zhang <zhangjinsong2@huawei.com>
>>>>
>>>> This module support updating the boot CPU firmware only.
>>>>
>>>> Contributed-under: TianoCore Contribution Agreement 1.1
>>>> Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
>>>> Signed-off-by: Ming Huang <huangming23@huawei.com>
>>>> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
>>>> ---
>>>> Platform/Hisilicon/D03/Capsule/SystemFirmwareUpdateConfig/SystemFirmwareUpdateConfig.ini | 45 +++++++
>>>> Platform/Hisilicon/D03/D03.dsc | 17 ++-
>>>> Platform/Hisilicon/D03/D03.fdf | 70 +++++++++++
>>>> Platform/Hisilicon/D03/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptor.aslc | 81 +++++++++++++
>>>> Platform/Hisilicon/D03/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf | 50 ++++++++
>>>> Platform/Hisilicon/D03/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptorPei.c | 70 +++++++++++
>>>> Platform/Hisilicon/D05/Capsule/SystemFirmwareUpdateConfig/SystemFirmwareUpdateConfig.ini | 45 +++++++
>>>> Platform/Hisilicon/D05/D05.dsc | 19 ++-
>>>> Platform/Hisilicon/D05/D05.fdf | 70 +++++++++++
>>>> Platform/Hisilicon/D05/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptor.aslc | 81 +++++++++++++
>>>> Platform/Hisilicon/D05/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf | 50 ++++++++
>>>> Platform/Hisilicon/D05/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptorPei.c | 70 +++++++++++
>>>> Silicon/Hisilicon/Hisilicon.dsc.inc | 11 +-
>>>> Silicon/Hisilicon/Hisilicon.fdf.inc | 9 ++
>>>> Silicon/Hisilicon/Library/PlatformFlashAccessLib/PlatformFlashAccessLibDxe.c | 123 ++++++++++++++++++++
>>>> Silicon/Hisilicon/Library/PlatformFlashAccessLib/PlatformFlashAccessLibDxe.inf | 51 ++++++++
>>>> 16 files changed, 859 insertions(+), 3 deletions(-)
>>>>
>>>
>>>> diff --git a/Platform/Hisilicon/D03/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptor.aslc b/Platform/Hisilicon/D03/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptor.aslc
>>>> new file mode 100644
>>>> index 0000000..d9f4a00
>>>> --- /dev/null
>>>> +++ b/Platform/Hisilicon/D03/Drivers/SystemFirmwareDescriptor/SystemFirmwareDescriptor.aslc
>>>> @@ -0,0 +1,81 @@
>>>> +/** @file
>>>> + System Firmware descriptor.
>>>> +
>>>> + Copyright (c) 2018, Hisilicon Limited. All rights reserved.
>>>> + Copyright (c) 2018, Linaro Limited. All rights reserved.
>>>> + Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
>>>> +
>>>> + This program and the accompanying materials
>>>> + are licensed and made available under the terms and conditions of the BSD License
>>>> + which accompanies this distribution. The full text of the license may be found at
>>>> + http://opensource.org/licenses/bsd-license.php
>>>> +
>>>> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>>>> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>>>> +
>>>> +**/
>>>> +
>>>> +#include <PiPei.h>
>>>> +#include <Guid/EdkiiSystemFmpCapsule.h>
>>>> +#include <Protocol/FirmwareManagement.h>
>>>> +
>>>> +#define PACKAGE_VERSION 0xFFFFFFFF
>>>> +#define PACKAGE_VERSION_STRING L"Unknown"
>>>> +
>>>> +#define CURRENT_FIRMWARE_VERSION 0x00000002
>>>> +#define CURRENT_FIRMWARE_VERSION_STRING L"0x00000002"
>>>> +#define LOWEST_SUPPORTED_FIRMWARE_VERSION 0x00000001
>>>> +
>>>> +#define IMAGE_ID SIGNATURE_64('H','W','A', 'R', 'M', '_', 'F', 'd')
>>>> +#define IMAGE_ID_STRING L"ARMPlatformFd"
>>>> +
>>>> +// PcdSystemFmpCapsuleImageTypeIdGuid
>>>> +#define IMAGE_TYPE_ID_GUID { 0x44c850f2, 0x85ff, 0x4be5, { 0xbf, 0x34, 0xa5, 0x95, 0x28, 0xdf, 0x22, 0xd3 } }
>>>> +
>>>> +typedef struct {
>>>> + EDKII_SYSTEM_FIRMWARE_IMAGE_DESCRIPTOR Descriptor;
>>>> + // real string data
>>>> + CHAR16 ImageIdNameStr[sizeof(IMAGE_ID_STRING) / sizeof(CHAR16)];
>>>> + CHAR16 VersionNameStr[sizeof(CURRENT_FIRMWARE_VERSION_STRING) / sizeof(CHAR16)];
>>>> + CHAR16 PackageVersionNameStr[sizeof(PACKAGE_VERSION_STRING) / sizeof(CHAR16)];
>>>
>>> Use ARRAY_SIZE for the 3 above?
>>
>> If use ARRAY_SIZE, the three macro must change to array of CHAR16.
>
> What problem are you encountering when simply replacing
> CHAR16 ImageIdNameStr[sizeof(IMAGE_ID_STRING) / sizeof(CHAR16)];
> with
> CHAR16 ImageIdNameStr[ARRAY_SIZE (IMAGE_ID_STRING)];
> ?
>
In my mind, simply replacing can not be compiled, but actually it works.
I will replace it as your comments.
Thanks,
Ming
>> It is not necessary maybe.The same style is found in
>> SystemFirmwareDescriptor.aslc from other platform,like
>> AMD,Socionext.
>
> Patches welcome.
>
> ARRAY_SIZE was only added to MdePkg in October 2016.
> Ideally, all code should be using this macro, but at least we can try
> to make sure all _new_ code uses it, when we spot missed opportunities.
>
> /
> Leif
>
> .
>
--
Best Regards,
Ming
next prev parent reply other threads:[~2018-01-31 1:08 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-26 8:00 [PATCH edk2-platforms v2 00/15] Improve D0x platforms and bug fix Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 01/15] Hisilicon/D05: Move Madt definition to head file Ming Huang
2018-01-30 14:27 ` graeme.gregory
2018-01-26 8:00 ` [PATCH edk2-platforms v2 02/15] Hisilicon/D05: Add PPTT support Ming Huang
2018-01-30 14:28 ` graeme.gregory
2018-02-01 1:11 ` Jeremy Linton
2018-02-02 3:42 ` Huangming (Mark)
2018-02-02 16:17 ` Jeremy Linton
2018-01-26 8:00 ` [PATCH edk2-platforms v2 03/15] Hisilicon/D0x/BDS: Switch to Generic BDS driver Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 04/15] Hisilicon/D0x: Break BMC SetBoot option out into separate library Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 05/15] Hisilicon D03/D05: Add capsule upgrade support Ming Huang
2018-01-29 19:58 ` Leif Lindholm
2018-01-30 12:48 ` Huangming (Mark)
2018-01-30 13:21 ` Leif Lindholm
2018-01-31 1:14 ` Huangming (Mark) [this message]
2018-01-30 12:47 ` Ard Biesheuvel
2018-01-26 8:00 ` [PATCH edk2-platforms v2 06/15] Hisilicon D03/D05: Open SasPlatform source code Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 07/15] Hisilicon D03/D05: Open SnpPlatform " Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 08/15] Hilisicon: Change DmaLib to CoherentDmaLib Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 09/15] Hisilicon/Smbios: Indicate use of ProcessorFamily2 in type 4 table Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 10/15] Hisilicon/PCIe: Disable PCIe ASPM Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 11/15] Hisilicon/D05: Replace SP805Watchdog by WatchdogTimer driver Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 12/15] Hisilicon/D03: " Ming Huang
2018-01-26 8:00 ` [PATCH edk2-platforms v2 13/15] Hisilicon/D05/ACPI: Add ITS PXM Ming Huang
2018-01-30 14:30 ` graeme.gregory
2018-01-26 8:00 ` [PATCH edk2-platforms v2 14/15] Hisilicon/D05/ACPI: Add Pcie, HNS and SAS PXM Ming Huang
2018-01-30 14:31 ` graeme.gregory
2018-01-26 8:00 ` [PATCH edk2-platforms v2 15/15] Hisilicon D03/D05: Update firmware version to 18.02 Ming Huang
2018-01-29 17:33 ` [PATCH edk2-platforms v2 00/15] Improve D0x platforms and bug fix Leif Lindholm
2018-02-03 7:50 ` Huangming (Mark)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c949c862-e4bf-db33-2733-413f0b7c2aaf@huawei.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox