From: "Lendacky, Thomas" <thomas.lendacky@amd.com>
To: devel@edk2.groups.io
Cc: Jordan Justen <jordan.l.justen@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Michael D Kinney <michael.d.kinney@intel.com>,
Liming Gao <liming.gao@intel.com>,
Eric Dong <eric.dong@intel.com>, Ray Ni <ray.ni@intel.com>,
Brijesh Singh <brijesh.singh@amd.com>,
Benjamin You <benjamin.you@intel.com>,
Dandan Bi <dandan.bi@intel.com>, Guo Dong <guo.dong@intel.com>,
Hao A Wu <hao.a.wu@intel.com>,
Jian J Wang <jian.j.wang@intel.com>,
Maurice Ma <maurice.ma@intel.com>
Subject: [PATCH v6 00/42] SEV-ES guest support
Date: Tue, 24 Mar 2020 12:40:14 -0500 [thread overview]
Message-ID: <cover.1585071656.git.thomas.lendacky@amd.com> (raw)
This patch series provides support for running EDK2/OVMF under SEV-ES.
Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on the
SEV support to protect the guest register state from the hypervisor. See
"AMD64 Architecture Programmer's Manual Volume 2: System Programming",
section "15.35 Encrypted State (SEV-ES)" [1].
In order to allow a hypervisor to perform functions on behalf of a guest,
there is architectural support for notifying a guest's operating system
when certain types of VMEXITs are about to occur. This allows the guest to
selectively share information with the hypervisor to satisfy the requested
function. The notification is performed using a new exception, the VMM
Communication exception (#VC). The information is shared through the
Guest-Hypervisor Communication Block (GHCB) using the VMGEXIT instruction.
The GHCB format and the protocol for using it is documented in "SEV-ES
Guest-Hypervisor Communication Block Standardization" [2].
The main areas of the EDK2 code that are updated to support SEV-ES are
around the exception handling support and the AP boot support.
Exception support is required starting in Sec, continuing through Pei
and into Dxe in order to handle #VC exceptions that are generated. Each
AP requires it's own GHCB page as well as a page to hold values specific
to that AP.
AP booting poses some interesting challenges. The INIT-SIPI-SIPI sequence
is typically used to boot the APs. However, the hypervisor is not allowed
to update the guest registers. The GHCB document [2] talks about how SMP
booting under SEV-ES is performed.
Since the GHCB page must be a shared (unencrypted) page, the processor
must be running in long mode in order for the guest and hypervisor to
communicate with each other. As a result, SEV-ES is only supported under
the X64 architecture.
[1] https://www.amd.com/system/files/TechDocs/24593.pdf
[2] https://developer.amd.com/wp-content/resources/56421.pdf
---
These patches are based on commit:
2f524a745e23 ("BaseTools:Fix build tools print traceback info issue")
Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
A version of the tree (with an extra patch to workaround Bugzilla 2340) can
be found at:
https://github.com/AMDESE/ovmf/tree/sev-es-v13
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Changes since v5:
- Remove extraneous VmgExitLib usage
- Miscellaneous changes to address feedback (coding style, etc.)
Changes since v4:
- Move the SEV-ES protocol negotiation out of the SEC exception handler
and into the SecMain.c file. As a result:
- Move the SecGhcb related PCDs out of UefiCpuPkg and into OvmfPkg
- Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c into a
single AMDSevVcHandler.c
- Consolidate VmgExitLib usage into common LibraryClasses sections
- Add documentation comments to the VmgExitLib functions
Changes since v3:
- Remove the need for the MP library finalization routine. The AP
jump table address will be held by the hypervisor rather than
communicated via the GHCB MSR. This removes some fragility around
the UEFI to OS transition.
- Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
communicate the SEV-ES status, so that SEC CPU exception handling is
only established for an SEV-ES guest.
- Fix SMM build breakageAdd around QemuFlashPtrWrite().
- Fix SMM build breakage by adding VC exception support the SMM CPU
exception handling.
- Add memory fencing around the invocation of AsmVmgExit().
- Clarify comments around the SEV-ES AP reset RIP values and usage.
- Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
- Remove the 16-bit code selector definition from MdeModulePkg
Changes since v2:
- Added a way to locate the SEV-ES fixed AP RIP address for starting
AP's to avoid updating the actual flash image (build time location
that is identified with a GUID value).
- Create a VmgExit library to replace static inline functions.
- Move some PCDs to the appropriate packages
- Add support for writing to QEMU flash under SEV-ES
- Add additional MMIO opcode support
- Cleaned up the GHCB MSR CPUID protocol support
Changes since v1:
- Patches reworked to be more specific to the component/area being updated
and order of definition/usage
- Created a library for VMGEXIT-related functions to replace use of inline
functions
- Allocation method for GDT changed from AllocatePool to AllocatePages
- Early caching only enabled for SEV-ES guests
- Ensure AP loop mode set to halt loop mode for SEV-ES guests
- Reserved SEC GHCB-related memory areas when S3 is enabled
Tom Lendacky (42):
MdePkg: Create PCDs to be used in support of SEV-ES
MdePkg: Add the MSR definition for the GHCB register
MdePkg: Add a structure definition for the GHCB
MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables
MdePkg/BaseLib: Add support for the XGETBV instruction
MdePkg/BaseLib: Add support for the VMGEXIT instruction
UefiCpuPkg: Implement library support for VMGEXIT
OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception
UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events
UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT NAE
events
UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO)
UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX NAE
events
UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX NAE
events
UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write NAE
events
OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
OvmfPkg: Add support to perform SEV-ES initialization
OvmfPkg: Create a GHCB page for use during Sec phase
OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled
UefiCpuPkg: Create an SEV-ES workarea PCD
OvmfPkg: Reserve a page in memory for the SEV-ES usage
OvmfPkg/ResetVector: Add support for a 32-bit SEV check
OvmfPkg/Sec: Add #VC exception handling for Sec phase
OvmfPkg/Sec: Enable cache early to speed up booting
OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with
SEV-ES is enabled
UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
enabled
UefiCpuPkg: Allow AP booting under SEV-ES
OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
OvmfPkg: Move the GHCB allocations into reserved memory
UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
MdeModulePkg/MdeModulePkg.dec | 9 +
OvmfPkg/OvmfPkg.dec | 9 +
UefiCpuPkg/UefiCpuPkg.dec | 17 +
OvmfPkg/OvmfPkgIa32.dsc | 6 +
OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
OvmfPkg/OvmfPkgX64.dsc | 6 +
OvmfPkg/OvmfXen.dsc | 1 +
UefiCpuPkg/UefiCpuPkg.dsc | 2 +
UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
OvmfPkg/OvmfPkgX64.fdf | 9 +
MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
MdePkg/Library/BaseLib/BaseLib.inf | 4 +
OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
.../FvbServicesRuntimeDxe.inf | 2 +
OvmfPkg/ResetVector/ResetVector.inf | 8 +
OvmfPkg/Sec/SecMain.inf | 4 +
.../DxeCpuExceptionHandlerLib.inf | 5 +
.../PeiCpuExceptionHandlerLib.inf | 5 +
.../SecPeiCpuExceptionHandlerLib.inf | 5 +
.../SmmCpuExceptionHandlerLib.inf | 5 +
UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
.../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
MdePkg/Include/Library/BaseLib.h | 31 +
MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
.../QemuFlash.h | 6 +
UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
.../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
.../CpuExceptionCommon.h | 2 +
UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
.../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
.../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
.../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
.../MemEncryptSevLibInternal.c | 75 +-
OvmfPkg/PlatformPei/AmdSev.c | 82 ++
OvmfPkg/PlatformPei/MemDetect.c | 23 +
.../QemuFlash.c | 23 +-
.../QemuFlashDxe.c | 15 +
.../QemuFlashSmm.c | 9 +
OvmfPkg/Sec/SecMain.c | 160 ++-
UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
.../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
.../CpuExceptionCommon.c | 2 +-
.../Ia32/ArchAMDSevVcHandler.c | 24 +
.../PeiDxeSmmCpuException.c | 16 +
.../SecPeiCpuException.c | 16 +
.../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
.../X64/ExceptionHandlerAsm.nasm | 17 +
UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
.../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
.../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
73 files changed, 4061 insertions(+), 99 deletions(-)
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
--
2.17.1
next reply other threads:[~2020-03-24 17:41 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-24 17:40 Lendacky, Thomas [this message]
2020-03-24 17:40 ` [PATCH v6 01/42] MdePkg: Create PCDs to be used in support of SEV-ES Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 02/42] MdePkg: Add the MSR definition for the GHCB register Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 03/42] MdePkg: Add a structure definition for the GHCB Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 04/42] MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 05/42] MdePkg/BaseLib: Add support for the XGETBV instruction Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 06/42] MdePkg/BaseLib: Add support for the VMGEXIT instruction Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 07/42] UefiCpuPkg: Implement library support for VMGEXIT Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 08/42] OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 09/42] UefiPayloadPkg: Prepare UefiPayloadPkg " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 10/42] UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 11/42] UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 12/42] UefiCpuPkg/CpuExceptionHandler: Support string IO " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 13/42] UefiCpuPkg/CpuExceptionHandler: Add support for CPUID " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 14/42] UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 15/42] UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO) Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 16/42] UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 17/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 18/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 19/42] UefiCpuPkg/CpuExceptionHandler: Add support for INVD " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 20/42] UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 21/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 22/42] UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 23/42] UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 24/42] UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 25/42] OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 26/42] OvmfPkg: Add support to perform SEV-ES initialization Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 27/42] OvmfPkg: Create a GHCB page for use during Sec phase Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 28/42] OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 29/42] OvmfPkg: Create GHCB pages for use during Pei and Dxe phase Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 30/42] OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 31/42] UefiCpuPkg: Create an SEV-ES workarea PCD Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 32/42] OvmfPkg: Reserve a page in memory for the SEV-ES usage Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 33/42] OvmfPkg/ResetVector: Add support for a 32-bit SEV check Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 34/42] OvmfPkg/Sec: Add #VC exception handling for Sec phase Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 36/42] OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with SEV-ES is enabled Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 37/42] UefiCpuPkg: Add a 16-bit protected mode code segment descriptor Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 38/42] UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is enabled Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 39/42] UefiCpuPkg: Allow AP booting under SEV-ES Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 40/42] OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 35/42] OvmfPkg/Sec: Enable cache early to speed up booting Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 41/42] OvmfPkg: Move the GHCB allocations into reserved memory Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 42/42] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use Lendacky, Thomas
2020-03-30 16:53 ` [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
2020-03-31 0:47 ` [edk2-devel] " Dong, Eric
2020-04-01 20:42 ` Lendacky, Thomas
2020-04-02 0:12 ` Dong, Eric
[not found] ` <1601D84A636A7BFC.25844@groups.io>
2020-04-14 15:30 ` Dong, Eric
2020-04-16 13:46 ` Lendacky, Thomas
2020-04-17 9:10 ` Dong, Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1585071656.git.thomas.lendacky@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox