From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: Pete Batard <pete@akeo.ie>, devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org
Subject: Re: [edk2-platforms][PATCH 3/6] Platform/RPi4: Improve SPCR and DBG2 ACPI table generation
Date: Wed, 18 Dec 2019 18:00:07 +0100 [thread overview]
Message-ID: <d153a9e6-49aa-e5c0-11d5-fbb0781951c1@redhat.com> (raw)
In-Reply-To: <ddf0a41b-f55a-a2f0-9f26-f4860363e2ad@akeo.ie>
On 12/18/19 5:36 PM, Pete Batard wrote:
> Hi Philippe,
>
> On 2019.12.18 15:57, Philippe Mathieu-Daudé wrote:
>> On 12/18/19 12:41 PM, Pete Batard wrote:
>>> Use code derived from JunoPkg to generate our serial tables and
>>> also use PCDs where possible.
>>>
>>> Signed-off-by: Pete Batard <pete@akeo.ie>
>>> ---
>>> Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf | 4 +-
>>> Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc | 100
>>> +++++++++++++++++---
>>> Platform/RaspberryPi/RPi4/AcpiTables/Spcr.asl | 48 ----------
>>> Platform/RaspberryPi/RPi4/AcpiTables/Spcr.aslc | 94
>>> ++++++++++++++++++
>>> 4 files changed, 183 insertions(+), 63 deletions(-)
>>>
>>> diff --git a/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf
>>> b/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf
>>> index 50c9f7694d84..6b1155d66444 100644
>>> --- a/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf
>>> +++ b/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf
>>> @@ -31,7 +31,7 @@ [Sources]
>>> Gtdt.aslc
>>> Dsdt.asl
>>> Csrt.aslc
>>> - Spcr.asl
>>> + Spcr.aslc
>>> [Packages]
>>> ArmPkg/ArmPkg.dec
>>> @@ -47,4 +47,6 @@ [FixedPcd]
>>> gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum
>>> gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
>>> gArmTokenSpaceGuid.PcdGicDistributorBase
>>> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
>>> + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
>>> gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress
>>> diff --git a/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc
>>> b/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc
>>> index 849cf5134793..589a5c2cbd71 100644
>>> --- a/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc
>>> +++ b/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc
>>> @@ -2,27 +2,99 @@
>>> *
>>> * Debug Port Table (DBG2)
>>> *
>>> - * Copyright (c) Microsoft Corporation. All rights reserved.
>>> + * Copyright (c) 2019, Pete Batard <pete@akeo.ie>
>>> + * Copyright (c) 2012-2016, ARM Limited. All rights reserved.
>>> *
>>> * SPDX-License-Identifier: BSD-2-Clause-Patent
>>> *
>>> **/
>>> -UINT8 Dbg2[92] = {
>>> - 0x44, 0x42, 0x47, 0x32, 0x5C, 0x00, 0x00, 0x00, 0x00, 0x00,
>>> - 0x4D, 0x53, 0x46, 0x54, 0x20, 0x20, 0x45, 0x44, 0x4B, 0x32,
>>> - 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53,
>>> - 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x2C, 0x00, 0x00, 0x00,
>>> - 0x01, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x01, 0x0A, 0x00,
>>> - 0x26, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x80, 0x10, 0x00,
>>> - 0x00, 0x00, 0x16, 0x00, 0x22, 0x00, 0x00, 0x20, 0x00, 0x10,
>>> - 0x00, 0x50, 0x21, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00,
>>> - 0x00, 0x00, '\\', '_', 'S', 'B', '.', 'U', 'R', 'T',
>>> - 'M', 0x00,
>>> +#include <IndustryStandard/Acpi.h>
>>> +#include <IndustryStandard/DebugPort2Table.h>
>>> +#include <Library/AcpiLib.h>
>>> +#include <Library/PcdLib.h>
>>> +
>>> +#include "AcpiTables.h"
>>> +
>>> +#pragma pack(1)
>>> +
>>> +#define RPI_DBG2_NUM_DEBUG_PORTS 1
>>> +#define RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS 1
>>> +#define RPI_DBG2_NAMESPACESTRING_FIELD_SIZE 10
>>> +
>>> +//
>>> +// When using the miniUART, PcdSerialRegisterBase points to the 8250
>>> base address,
>>> +// which is offset by 0x40 from the actual Bcm2835 base address
>>
>> Actually this is the other way around, the 8250 is at AUX + 0x40.
>>
>> Can we clean that up or is it too late?
>
> Yeah, re-reading this I admit the comment is not too clear.
>
> Let me try to rephrase this better in v2.
Actually my comment is about the code... Do you think we can clean the
RPi3/RPi4 codebase by changing
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase?
If you don't have time for this, maybe you can add a /* TODO FIXME */?
>>
>>> +//
>>> +#define RPI_UART_BASE_ADDRESS (FixedPcdGet64 (PcdSerialRegisterBase)
>>> - 0x40)
>>> +#define RPI_UART_LENGTH 0x70
>>> +//
>>> +// RPI_UART_STR should match the value used Uart.asl
>>> +//
>>> +#define RPI_UART_STR { '\\', '_',
>>> 'S', 'B', '.', 'U', 'R', 'T', 'M', 0x00 }
>>> +
>>> +typedef struct {
>>> + EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device;
>>> + EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister;
>>> + UINT32 AddressSize;
>>> + UINT8 NameSpaceString[RPI_DBG2_NAMESPACESTRING_FIELD_SIZE];
>>> +} DBG2_DEBUG_DEVICE_INFORMATION;
>>> +
>>> +typedef struct {
>>> + EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description;
>>> + DBG2_DEBUG_DEVICE_INFORMATION
>>> Dbg2DeviceInfo[RPI_DBG2_NUM_DEBUG_PORTS];
>>> +} DBG2_TABLE;
>>> +
>>> +
>>> +#define DBG2_DEBUG_PORT_DDI(NumReg, SubType, UartBase, UartAddrLen,
>>> UartNameStr) { \
>>> + { \
>>> + EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, /*
>>> UINT8 Revision */ \
>>> + sizeof (DBG2_DEBUG_DEVICE_INFORMATION), /* UINT16 Length
>>> */ \
>>> + NumReg, /* UINT8 NumberofGenericAddressRegisters */ \
>>> + RPI_DBG2_NAMESPACESTRING_FIELD_SIZE, /* UINT16
>>> NameSpaceStringLength */ \
>>> + OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString), /*
>>> UINT16 NameSpaceStringOffset */ \
>>> + 0, /* UINT16 OemDataLength */ \
>>> + 0, /* UINT16 OemDataOffset */ \
>>> + EFI_ACPI_DBG2_PORT_TYPE_SERIAL, /* UINT16 Port Type
>>> */ \
>>> + SubType, /* UINT16 Port Subtype */ \
>>> + {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE}, /* UINT8
>>> Reserved[2] */ \
>>> + OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION,
>>> BaseAddressRegister), /* UINT16 BaseAddressRegister Offset */ \
>>> + OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize) /*
>>> UINT16 AddressSize Offset */ \
>>> + }, \
>>> + ARM_GAS32 (UartBase), /*
>>> EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */ \
>>> + UartAddrLen, /* UINT32
>>> AddressSize */ \
>>> + UartNameStr /* UINT8
>>> NameSpaceString[MAX_DBG2_NAME_LEN] */ \
>>> + }
>>> +
>>> +
>>> +STATIC DBG2_TABLE Dbg2 = {
>>> + {
>>> + ACPI_HEADER (
>>> + EFI_ACPI_5_1_DEBUG_PORT_2_TABLE_SIGNATURE,
>>> + DBG2_TABLE,
>>> + EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION
>>> + ),
>>> + OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo),
>>> + RPI_DBG2_NUM_DEBUG_PORTS /* UINT32 NumberDbgDeviceInfo */
>>> + },
>>> + {
>>> + /*
>>> + * Kernel Debug Port
>>> + */
>>> + DBG2_DEBUG_PORT_DDI (
>>> + RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS,
>>> + EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART,
>>> + RPI_UART_BASE_ADDRESS,
>>> + RPI_UART_LENGTH,
>>> + RPI_UART_STR
>>> + ),
>>> + }
>>> };
>> [...]
>>
>
next prev parent reply other threads:[~2019-12-18 17:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 11:41 [edk2-platforms][PATCH 0/6] Platform/RPi4: ACPI improvements Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 1/6] Platform/RPi4: Clean up ACPI definitions Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 2/6] Platform/RPi4: Improve FADT ACPI table generation Pete Batard
2019-12-18 14:46 ` Ard Biesheuvel
2019-12-18 16:31 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 3/6] Platform/RPi4: Improve SPCR and DBG2 " Pete Batard
2019-12-18 15:57 ` Philippe Mathieu-Daudé
2019-12-18 16:36 ` Pete Batard
2019-12-18 17:00 ` Philippe Mathieu-Daudé [this message]
2019-12-18 17:10 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 4/6] Platform/RPi4: Add switch to select between PL011 and miniUART Pete Batard
2019-12-18 16:05 ` Philippe Mathieu-Daudé
2019-12-18 16:59 ` [edk2-devel] " Pete Batard
2019-12-18 17:05 ` Philippe Mathieu-Daudé
2019-12-18 11:41 ` [edk2-platforms][PATCH 5/6] Platform/RPi4: Add XHCI and MCFG ACPI tables Pete Batard
2019-12-18 14:55 ` Ard Biesheuvel
2019-12-18 16:31 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 6/6] Platform/RPi4: Add ACPI basic mode build option Pete Batard
2019-12-18 12:10 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d153a9e6-49aa-e5c0-11d5-fbb0781951c1@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox