* HiiSetToDefaults behavior @ 2017-08-25 8:13 Wim Vervoorn 2017-08-25 8:57 ` Bi, Dandan 0 siblings, 1 reply; 4+ messages in thread From: Wim Vervoorn @ 2017-08-25 8:13 UTC (permalink / raw) To: edk2-devel@lists.01.org Hello, I have a question about the expect behavior of HiiSetToDefaults(). So far I haven't been able to find a clear definition of what this should do. What I expect is that this call would only touch the items that have a default defined. So what I would think is that Test2OfValue below would become 1 and Test1OfValue would be untouched as long as it's value is either 0 or 1 and become 1 if this is not the case. What seems to happen is that for Test1OfValue the first item is used as the default. oneof name = Test1OneOf, // Define reference name for Question varid = lIfrNVData.Test1OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST1_PROMPT), help = STRING_TOKEN(STR_TEST1_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = 0; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; oneof name = Test2OneOf, // Define reference name for Question varid = lIfrNVData.Test2OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST2_PROMPT), help = STRING_TOKEN(STR_TEST2_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = DEFAULT; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; Best Regards, Wim Vervoorn Eltan B.V. Ambachtstraat 23 5481 SM Schijndel The Netherlands T : +31-(0)73-594 46 64 E : wvervoorn@eltan.com W : http://www.eltan.com<http://www.eltan.com/> "THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE +31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL COPIES." ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: HiiSetToDefaults behavior 2017-08-25 8:13 HiiSetToDefaults behavior Wim Vervoorn @ 2017-08-25 8:57 ` Bi, Dandan 2017-08-25 9:07 ` Wim Vervoorn 0 siblings, 1 reply; 4+ messages in thread From: Bi, Dandan @ 2017-08-25 8:57 UTC (permalink / raw) To: Wim Vervoorn, edk2-devel@lists.01.org Hi Wim Vervoorn, Current behavior of HiiSetToDefaults(): 1. For Question has the specified type default value, will set the default value to storage for the Question. 2. For Question without the specified type default, other type default value can be shared.(such as: standard default doesn't exit, but Manufacturing Default exits, Manufacturing Default value can be shared with standard default) 3. For Question without any types of default value, current implementation will (a) set first option value as the default value of oneof (b) set minimum value as the default value of numeric .... Thanks, Dandan -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Wim Vervoorn Sent: Friday, August 25, 2017 4:13 PM To: edk2-devel@lists.01.org Subject: [edk2] HiiSetToDefaults behavior Hello, I have a question about the expect behavior of HiiSetToDefaults(). So far I haven't been able to find a clear definition of what this should do. What I expect is that this call would only touch the items that have a default defined. So what I would think is that Test2OfValue below would become 1 and Test1OfValue would be untouched as long as it's value is either 0 or 1 and become 1 if this is not the case. What seems to happen is that for Test1OfValue the first item is used as the default. oneof name = Test1OneOf, // Define reference name for Question varid = lIfrNVData.Test1OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST1_PROMPT), help = STRING_TOKEN(STR_TEST1_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = 0; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; oneof name = Test2OneOf, // Define reference name for Question varid = lIfrNVData.Test2OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST2_PROMPT), help = STRING_TOKEN(STR_TEST2_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = DEFAULT; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; Best Regards, Wim Vervoorn Eltan B.V. Ambachtstraat 23 5481 SM Schijndel The Netherlands T : +31-(0)73-594 46 64 E : wvervoorn@eltan.com W : http://www.eltan.com<http://www.eltan.com/> "THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE +31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL COPIES." _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: HiiSetToDefaults behavior 2017-08-25 8:57 ` Bi, Dandan @ 2017-08-25 9:07 ` Wim Vervoorn 2017-08-25 14:58 ` Bi, Dandan 0 siblings, 1 reply; 4+ messages in thread From: Wim Vervoorn @ 2017-08-25 9:07 UTC (permalink / raw) To: Bi, Dandan, edk2-devel@lists.01.org Hello Dandan, Thanks for the clarification. So I assume there is no way that will cause this call to leave certain fields as they are. Is this correct? Best Regards, Wim Vervoorn Eltan B.V. Ambachtstraat 23 5481 SM Schijndel The Netherlands T : +31-(0)73-594 46 64 E : wvervoorn@eltan.com W : http://www.eltan.com "THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE +31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL COPIES." -----Original Message----- From: Bi, Dandan [mailto:dandan.bi@intel.com] Sent: Friday, August 25, 2017 10:57 AM To: Wim Vervoorn <wvervoorn@eltan.com>; edk2-devel@lists.01.org Subject: RE: HiiSetToDefaults behavior Hi Wim Vervoorn, Current behavior of HiiSetToDefaults(): 1. For Question has the specified type default value, will set the default value to storage for the Question. 2. For Question without the specified type default, other type default value can be shared.(such as: standard default doesn't exit, but Manufacturing Default exits, Manufacturing Default value can be shared with standard default) 3. For Question without any types of default value, current implementation will (a) set first option value as the default value of oneof (b) set minimum value as the default value of numeric .... Thanks, Dandan -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Wim Vervoorn Sent: Friday, August 25, 2017 4:13 PM To: edk2-devel@lists.01.org Subject: [edk2] HiiSetToDefaults behavior Hello, I have a question about the expect behavior of HiiSetToDefaults(). So far I haven't been able to find a clear definition of what this should do. What I expect is that this call would only touch the items that have a default defined. So what I would think is that Test2OfValue below would become 1 and Test1OfValue would be untouched as long as it's value is either 0 or 1 and become 1 if this is not the case. What seems to happen is that for Test1OfValue the first item is used as the default. oneof name = Test1OneOf, // Define reference name for Question varid = lIfrNVData.Test1OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST1_PROMPT), help = STRING_TOKEN(STR_TEST1_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = 0; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; oneof name = Test2OneOf, // Define reference name for Question varid = lIfrNVData.Test2OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST2_PROMPT), help = STRING_TOKEN(STR_TEST2_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = DEFAULT; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; Best Regards, Wim Vervoorn Eltan B.V. Ambachtstraat 23 5481 SM Schijndel The Netherlands T : +31-(0)73-594 46 64 E : wvervoorn@eltan.com W : http://www.eltan.com<http://www.eltan.com/> "THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE +31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL COPIES." _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: HiiSetToDefaults behavior 2017-08-25 9:07 ` Wim Vervoorn @ 2017-08-25 14:58 ` Bi, Dandan 0 siblings, 0 replies; 4+ messages in thread From: Bi, Dandan @ 2017-08-25 14:58 UTC (permalink / raw) To: Wim Vervoorn, edk2-devel@lists.01.org Hi Wim Vervoorn, Yes, it's correct for some Questions like oneof, numeric, if they don't have default value, this call will take first option value, minimum value as their default value. But for Question like String opcode, if it doesn't have default, the value of this question will be untouched with this call. Thanks, Dandan -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Wim Vervoorn Sent: Friday, August 25, 2017 5:08 PM To: Bi, Dandan <dandan.bi@intel.com>; edk2-devel@lists.01.org Subject: Re: [edk2] HiiSetToDefaults behavior Hello Dandan, Thanks for the clarification. So I assume there is no way that will cause this call to leave certain fields as they are. Is this correct? Best Regards, Wim Vervoorn Eltan B.V. Ambachtstraat 23 5481 SM Schijndel The Netherlands T : +31-(0)73-594 46 64 E : wvervoorn@eltan.com W : http://www.eltan.com "THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE +31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL COPIES." -----Original Message----- From: Bi, Dandan [mailto:dandan.bi@intel.com] Sent: Friday, August 25, 2017 10:57 AM To: Wim Vervoorn <wvervoorn@eltan.com>; edk2-devel@lists.01.org Subject: RE: HiiSetToDefaults behavior Hi Wim Vervoorn, Current behavior of HiiSetToDefaults(): 1. For Question has the specified type default value, will set the default value to storage for the Question. 2. For Question without the specified type default, other type default value can be shared.(such as: standard default doesn't exit, but Manufacturing Default exits, Manufacturing Default value can be shared with standard default) 3. For Question without any types of default value, current implementation will (a) set first option value as the default value of oneof (b) set minimum value as the default value of numeric .... Thanks, Dandan -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Wim Vervoorn Sent: Friday, August 25, 2017 4:13 PM To: edk2-devel@lists.01.org Subject: [edk2] HiiSetToDefaults behavior Hello, I have a question about the expect behavior of HiiSetToDefaults(). So far I haven't been able to find a clear definition of what this should do. What I expect is that this call would only touch the items that have a default defined. So what I would think is that Test2OfValue below would become 1 and Test1OfValue would be untouched as long as it's value is either 0 or 1 and become 1 if this is not the case. What seems to happen is that for Test1OfValue the first item is used as the default. oneof name = Test1OneOf, // Define reference name for Question varid = lIfrNVData.Test1OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST1_PROMPT), help = STRING_TOKEN(STR_TEST1_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = 0; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; oneof name = Test2OneOf, // Define reference name for Question varid = lIfrNVData.Test2OfValue, // Use "DataStructure.Member" to reference Buffer Storage prompt = STRING_TOKEN(STR_TEST2_PROMPT), help = STRING_TOKEN(STR_TEST2_HELP), // // Define an option (EFI_IFR_ONE_OF_OPTION) // option text = STRING_TOKEN(STR_ENABLE), value = 1, flags = DEFAULT; option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = 0; endoneof; Best Regards, Wim Vervoorn Eltan B.V. Ambachtstraat 23 5481 SM Schijndel The Netherlands T : +31-(0)73-594 46 64 E : wvervoorn@eltan.com W : http://www.eltan.com<http://www.eltan.com/> "THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE +31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL COPIES." _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-08-25 14:56 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-08-25 8:13 HiiSetToDefaults behavior Wim Vervoorn 2017-08-25 8:57 ` Bi, Dandan 2017-08-25 9:07 ` Wim Vervoorn 2017-08-25 14:58 ` Bi, Dandan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox