From: Alan Ott <alan@softiron.com>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>, edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, liming.gao@intel.com, yonghong.zhu@intel.com
Subject: Re: [PATCH edk2-platforms] Platform/OverdriveBoard: move device tree compilation into build
Date: Tue, 29 Aug 2017 15:26:21 -0400 [thread overview]
Message-ID: <f0611bfa-d383-2d5e-68fc-58f4ae6c2b39@softiron.com> (raw)
In-Reply-To: <20170829162751.25226-1-ard.biesheuvel@linaro.org>
On 08/29/2017 12:27 PM, Ard Biesheuvel wrote:
> Use the proposed BaseTools support for device tree compilation to
> build the device tree binary from source at build time. Give it its
> own .inf and a build rule so the tools take care of everything.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dtb | Bin 9357 -> 0 bytes
> Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dts | 510 --------------------
> Platform/AMD/OverdriveBoard/OverdriveBoard.dsc | 1 +
> Platform/AMD/OverdriveBoard/OverdriveBoard.fdf | 9 +-
> Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.dts | 487 +++++++++++++++++++
> Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.inf | 28 ++
> 6 files changed, 521 insertions(+), 514 deletions(-)
I like this in principle, but what's the 23 line difference in the DTS
and/or should it be in a separate patch from the patch that moves the
file so the difference is clear?
>
> diff --git a/Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dtb b/Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dtb
> deleted file mode 100644
> index c8e5fd980bce..000000000000
> Binary files a/Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dtb and /dev/null differ
> diff --git a/Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dts b/Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dts
> deleted file mode 100644
> index 4039f666004a..000000000000
> --- a/Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dts
> +++ /dev/null
> @@ -1,510 +0,0 @@
> -/*
> - * DTS file for AMD Seattle (Rev.B) Overdrive Development Board
> - *
> - * Copyright 2015 - 2016 ADVANCED MICRO DEVICES, INC. All Rights Reserved.
> - *
> - * This program and the accompanying materials are licensed and made available
> - * under the terms and conditions of the BSD License which accompanies this
> - * distribution. The full text of the license may be found at
> - * http://opensource.org/licenses/bsd-license.php
> - *
> - * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> - * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
> - * IMPLIED.
> - *
> - */
> -
> -/dts-v1/;
> -
> -/ {
> - model = "AMD Seattle (Rev.B) Development Board (Overdrive)";
> - compatible = "amd,seattle-overdrive", "amd,seattle";
> - interrupt-parent = <0x1>;
> - #address-cells = <0x2>;
> - #size-cells = <0x2>;
> -
> - interrupt-controller@e1101000 {
> - compatible = "arm,gic-400", "arm,cortex-a15-gic";
> - interrupt-controller;
> - #interrupt-cells = <0x3>;
> - #address-cells = <0x2>;
> - #size-cells = <0x2>;
> - reg = <0x0 0xe1110000 0x0 0x1000>,
> - <0x0 0xe112f000 0x0 0x2000>,
> - <0x0 0xe1140000 0x0 0x2000>,
> - <0x0 0xe1160000 0x0 0x2000>;
> - interrupts = <0x1 0x9 0xf04>;
> - ranges = <0x0 0x0 0x0 0xe1100000 0x0 0x100000>;
> - linux,phandle = <0x1>;
> - phandle = <0x1>;
> -
> - v2m@e0080000 {
> - compatible = "arm,gic-v2m-frame";
> - msi-controller;
> - reg = <0x0 0x80000 0x0 0x1000>;
> - linux,phandle = <0x4>;
> - phandle = <0x4>;
> - };
> - };
> -
> - timer {
> - compatible = "arm,armv8-timer";
> - interrupts = <0x1 0xd 0xff04>,
> - <0x1 0xe 0xff04>,
> - <0x1 0xb 0xff04>,
> - <0x1 0xa 0xff04>;
> - };
> -
> - smb {
> - compatible = "simple-bus";
> - #address-cells = <0x2>;
> - #size-cells = <0x2>;
> - ranges;
> - /*
> - * dma-ranges is 40-bit address space containing:
> - * - GICv2m MSI register is at 0xe0080000
> - * - DRAM range [0x8000000000 to 0xffffffffff]
> - */
> - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
> -
> - clk100mhz_0 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <100000000>;
> - clock-output-names = "adl3clk_100mhz";
> - };
> -
> - clk375mhz {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <375000000>;
> - clock-output-names = "ccpclk_375mhz";
> - };
> -
> - clk333mhz {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <333000000>;
> - clock-output-names = "sataclk_333mhz";
> - linux,phandle = <0x2>;
> - phandle = <0x2>;
> - };
> -
> - clk500mhz_0 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <500000000>;
> - clock-output-names = "pcieclk_500mhz";
> - };
> -
> - clk500mhz_1 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <500000000>;
> - clock-output-names = "dmaclk_500mhz";
> - };
> -
> - clk250mhz_4 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <250000000>;
> - clock-output-names = "miscclk_250mhz";
> - linux,phandle = <0xd>;
> - phandle = <0xd>;
> - };
> -
> - clk100mhz_1 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <100000000>;
> - clock-output-names = "uartspiclk_100mhz";
> - linux,phandle = <0x3>;
> - phandle = <0x3>;
> - };
> -
> - sata0_smmu: smmu@e0200000 {
> - compatible = "arm,mmu-401";
> - reg = <0 0xe0200000 0 0x10000>;
> - #global-interrupts = <1>;
> - interrupts = /* Uses combined intr for both
> - * global and context
> - */
> - <0 332 4>,
> - <0 332 4>;
> - #iommu-cells = <2>;
> - dma-coherent;
> - };
> -
> - sata1_smmu: smmu@e0c00000 {
> - compatible = "arm,mmu-401";
> - reg = <0 0xe0c00000 0 0x10000>;
> - #global-interrupts = <1>;
> - interrupts = /* Uses combined intr for both
> - * global and context
> - */
> - <0 331 4>,
> - <0 331 4>;
> - #iommu-cells = <2>;
> - dma-coherent;
> - };
> -
> - sata@e0300000 {
> - compatible = "snps,dwc-ahci";
> - reg = <0x0 0xe0300000 0x0 0xf0000>;
> - interrupts = <0x0 0x163 0x4>;
> - clocks = <0x2>;
> - dma-coherent;
> - iommus = <&sata0_smmu 0x00 0x1f>; /* 0-31 */
> - };
> -
> - sata@e0d00000 {
> - status = "disabled";
> - compatible = "snps,dwc-ahci";
> - reg = <0x0 0xe0d00000 0x0 0xf0000>;
> - interrupts = <0x0 0x162 0x4>;
> - clocks = <0x2>;
> - dma-coherent;
> - iommus = <&sata1_smmu 0x00 0x1f>; /* 0-31 */
> - };
> -
> - i2c@e1000000 {
> - compatible = "snps,designware-i2c";
> - reg = <0x0 0xe1000000 0x0 0x1000>;
> - interrupts = <0x0 0x165 0x4>;
> - clocks = <0xd>;
> - };
> -
> - i2c@e0050000 {
> - compatible = "snps,designware-i2c";
> - reg = <0x0 0xe0050000 0x0 0x1000>;
> - interrupts = <0x0 0x154 0x4>;
> - clocks = <0xd>;
> - };
> -
> - serial@e1010000 {
> - compatible = "arm,pl011", "arm,primecell";
> - reg = <0x0 0xe1010000 0x0 0x1000>;
> - interrupts = <0x0 0x148 0x4>;
> - clocks = <0x3 0x3>;
> - clock-names = "uartclk", "apb_pclk";
> - };
> -
> - ssp@e1020000 {
> - compatible = "arm,pl022", "arm,primecell";
> - reg = <0x0 0xe1020000 0x0 0x1000>;
> - spi-controller;
> - interrupts = <0x0 0x14a 0x4>;
> - clocks = <0x3>;
> - clock-names = "apb_pclk";
> - };
> -
> - ssp@e1030000 {
> - compatible = "arm,pl022", "arm,primecell";
> - reg = <0x0 0xe1030000 0x0 0x1000>;
> - spi-controller;
> - interrupts = <0x0 0x149 0x4>;
> - clocks = <0x3>;
> - clock-names = "apb_pclk";
> - num-cs = <0x1>;
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> -
> - sdcard@0 {
> - compatible = "mmc-spi-slot";
> - reg = <0x0>;
> - spi-max-frequency = <20000000>;
> - voltage-ranges = <3200 3400>;
> - pl022,hierarchy = <0x0>;
> - pl022,interface = <0x0>;
> - pl022,com-mode = <0x0>;
> - pl022,rx-level-trig = <0x0>;
> - pl022,tx-level-trig = <0x0>;
> - };
> - };
> -
> - gpio@e1050000 { /* [0 : 7] */
> - compatible = "arm,pl061", "arm,primecell";
> - #gpio-cells = <0x2>;
> - reg = <0x0 0xe1050000 0x0 0x1000>;
> - gpio-controller;
> - interrupt-controller;
> - #interrupt-cells = <0x2>;
> - interrupts = <0x0 0x166 0x4>;
> - clocks = <0x3>;
> - clock-names = "apb_pclk";
> - };
> -
> - gpio@e0020000 { /* [8 : 15] */
> - status = "disabled";
> - compatible = "arm,pl061", "arm,primecell";
> - #gpio-cells = <0x2>;
> - reg = <0x0 0xe0020000 0x0 0x1000>;
> - gpio-controller;
> - interrupt-controller;
> - #interrupt-cells = <0x2>;
> - interrupts = <0x0 0x16e 0x4>;
> - clocks = <0x3>;
> - clock-names = "apb_pclk";
> - };
> -
> - gpio@e0030000 { /* [16 : 23] */
> - status = "disabled";
> - compatible = "arm,pl061", "arm,primecell";
> - #gpio-cells = <0x2>;
> - reg = <0x0 0xe0030000 0x0 0x1000>;
> - gpio-controller;
> - interrupt-controller;
> - #interrupt-cells = <0x2>;
> - interrupts = <0x0 0x16d 0x4>;
> - clocks = <0x3>;
> - clock-names = "apb_pclk";
> - };
> -
> - gpio@e0080000 { /* [24] */
> - compatible = "arm,pl061", "arm,primecell";
> - #gpio-cells = <0x2>;
> - reg = <0x0 0xe0080000 0x0 0x1000>;
> - gpio-controller;
> - interrupt-controller;
> - #interrupt-cells = <0x2>;
> - interrupts = <0x0 0x169 0x4>;
> - clocks = <0x3>;
> - clock-names = "apb_pclk";
> - };
> -
> - ccp: ccp@e0100000 {
> - compatible = "amd,ccp-seattle-v1a";
> - reg = <0x0 0xe0100000 0x0 0x10000>;
> - interrupts = <0x0 0x3 0x4>;
> - dma-coherent;
> - amd,zlib-support = <0x1>;
> - };
> -
> - pcie: pcie@f0000000 {
> - compatible = "pci-host-ecam-generic";
> - #address-cells = <0x3>;
> - #size-cells = <0x2>;
> - #interrupt-cells = <0x1>;
> - iommu-map = <0x0 &pcie_smmu 0x0 0x10000>;
> - device_type = "pci";
> - bus-range = <0x0 0x7f>;
> - msi-parent = <0x4>;
> - reg = <0x0 0xf0000000 0x0 0x10000000>;
> - interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
> - interrupt-map = <0x1100 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x120 0x1>,
> - <0x1100 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x121 0x1>,
> - <0x1100 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x122 0x1>,
> - <0x1100 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x123 0x1>,
> -
> - <0x1200 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x124 0x1>,
> - <0x1200 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x125 0x1>,
> - <0x1200 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x126 0x1>,
> - <0x1200 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x127 0x1>,
> -
> - <0x1300 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x128 0x1>,
> - <0x1300 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x129 0x1>,
> - <0x1300 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x12a 0x1>,
> - <0x1300 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x12b 0x1>;
> - dma-coherent;
> - dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
> - ranges = <0x1000000 0x0 0x00000000 0x0 0xefff0000 0x00 0x00010000>, /* I/O Memory (size=64K) */
> - <0x2000000 0x0 0x40000000 0x0 0x40000000 0x00 0x80000000>, /* 32-bit MMIO (size=2G) */
> - <0x3000000 0x1 0x00000000 0x1 0x00000000 0x7f 0x00000000>; /* 64-bit MMIO (size= 124G) */
> - };
> -
> - pcie_smmu: smmu@e0a00000 {
> - compatible = "arm,mmu-401";
> - reg = <0 0xe0a00000 0 0x10000>;
> - #global-interrupts = <1>;
> - interrupts = /* Uses combined intr for both
> - * global and context
> - */
> - <0 333 4>,
> - <0 333 4>;
> - #iommu-cells = <1>;
> - dma-coherent;
> - };
> -
> - ccn@0xe8000000 {
> - compatible = "arm,ccn-504";
> - reg = <0x0 0xe8000000 0x0 0x1000000>;
> - interrupts = <0x0 0x17c 0x4>;
> - };
> -
> - gwdt@e0bb0000 {
> - status = "disabled";
> - compatible = "arm,sbsa-gwdt";
> - reg = <0x0 0xe0bb0000 0x0 0x10000
> - 0x0 0xe0bc0000 0x0 0x10000>;
> - reg-names = "refresh", "control";
> - interrupts = <0x0 0x151 0x4>;
> - interrupt-names = "ws0";
> - };
> -
> - kcs@e0010000 {
> - status = "disabled";
> - compatible = "ipmi-kcs";
> - device_type = "ipmi";
> - reg = <0x0 0xe0010000 0 0x8>;
> - interrupts = <0 389 4>;
> - interrupt-names = "ipmi_kcs";
> - reg-size = <1>;
> - reg-spacing = <4>;
> - };
> -
> - clk250mhz_0 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <250000000>;
> - clock-output-names = "xgmacclk0_dma_250mhz";
> - linux,phandle = <0x5>;
> - phandle = <0x5>;
> - };
> -
> - clk250mhz_1 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <250000000>;
> - clock-output-names = "xgmacclk0_ptp_250mhz";
> - linux,phandle = <0x6>;
> - phandle = <0x6>;
> - };
> -
> - clk250mhz_2 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <250000000>;
> - clock-output-names = "xgmacclk1_dma_250mhz";
> - linux,phandle = <0x7>;
> - phandle = <0x7>;
> - };
> -
> - clk250mhz_3 {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <250000000>;
> - clock-output-names = "xgmacclk1_ptp_250mhz";
> - linux,phandle = <0x8>;
> - phandle = <0x8>;
> - };
> -
> - phy@e1240800 {
> - status = "disabled";
> - compatible = "amd,xgbe-phy-seattle-v1a";
> - reg = <0x0 0xe1240800 0x0 0x0400>, /* SERDES RX/TX0 */
> - <0x0 0xe1250000 0x0 0x0060>, /* SERDES IR 1/2 */
> - <0x0 0xe12500f8 0x0 0x0004>; /* SERDES IR 2/2 */
> - interrupts = <0x0 0x143 0x4>;
> - amd,speed-set = <0x0>;
> - amd,serdes-blwc = <0x1 0x1 0x0>;
> - amd,serdes-cdr-rate = <0x2 0x2 0x7>;
> - amd,serdes-pq-skew = <0xa 0xa 0x12>;
> - amd,serdes-tx-amp = <0xf 0xf 0xa>;
> - amd,serdes-dfe-tap-config = <0x3 0x3 0x1>;
> - amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>;
> - linux,phandle = <0x9>;
> - phandle = <0x9>;
> - };
> -
> - phy@e1240c00 {
> - status = "disabled";
> - compatible = "amd,xgbe-phy-seattle-v1a";
> - reg = <0x0 0xe1240c00 0x0 0x0400>, /* SERDES RX/TX0 */
> - <0x0 0xe1250080 0x0 0x0060>, /* SERDES IR 1/2 */
> - <0x0 0xe12500fc 0x0 0x0004>; /* SERDES IR 2/2 */
> - interrupts = <0x0 0x142 0x4>;
> - amd,speed-set = <0x0>;
> - amd,serdes-blwc = <0x1 0x1 0x0>;
> - amd,serdes-cdr-rate = <0x2 0x2 0x7>;
> - amd,serdes-pq-skew = <0xa 0xa 0x12>;
> - amd,serdes-tx-amp = <0xf 0xf 0xa>;
> - amd,serdes-dfe-tap-config = <0x3 0x3 0x1>;
> - amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>;
> - linux,phandle = <0xa>;
> - phandle = <0xa>;
> - };
> -
> - xgmac0_smmu: smmu@e0600000 {
> - compatible = "arm,mmu-401";
> - reg = <0 0xe0600000 0 0x10000>;
> - #global-interrupts = <1>;
> - interrupts = /* Uses combined intr for both
> - * global and context
> - */
> - <0 336 4>,
> - <0 336 4>;
> - #iommu-cells = <2>;
> - dma-coherent;
> - };
> -
> - xgmac1_smmu: smmu@e0800000 {
> - compatible = "arm,mmu-401";
> - reg = <0 0xe0800000 0 0x10000>;
> - #global-interrupts = <1>;
> - interrupts = /* Uses combined intr for both
> - * global and context
> - */
> - <0 335 4>,
> - <0 335 4>;
> - #iommu-cells = <2>;
> - dma-coherent;
> - };
> -
> - xgmac@e0700000 {
> - status = "disabled";
> - compatible = "amd,xgbe-seattle-v1a";
> - reg = <0x0 0xe0700000 0x0 0x80000 0x0 0xe0780000 0x0 0x80000>;
> - interrupts = <0x0 0x145 0x4>,
> - <0x0 0x15a 0x1>,
> - <0x0 0x15b 0x1>,
> - <0x0 0x15c 0x1>,
> - <0x0 0x15d 0x1>;
> - amd,per-channel-interrupt;
> - mac-address = [02 a1 a2 a3 a4 a5];
> - clocks = <0x5 0x6>;
> - clock-names = "dma_clk", "ptp_clk";
> - phy-handle = <0x9>;
> - phy-mode = "xgmii";
> - dma-coherent;
> - iommus = <&xgmac0_smmu 0x00 0x1f>; /* 0-31 */
> - linux,phandle = <0xb>;
> - phandle = <0xb>;
> - };
> -
> - xgmac@e0900000 {
> - status = "disabled";
> - compatible = "amd,xgbe-seattle-v1a";
> - reg = <0x0 0xe0900000 0x0 0x80000 0x0 0xe0980000 0x0 0x80000>;
> - interrupts = <0x0 0x144 0x4>,
> - <0x0 0x155 0x1>,
> - <0x0 0x156 0x1>,
> - <0x0 0x157 0x1>,
> - <0x0 0x158 0x1>;
> - amd,per-channel-interrupt;
> - mac-address = [02 b1 b2 b3 b4 b5];
> - clocks = <0x7 0x8>;
> - clock-names = "dma_clk", "ptp_clk";
> - phy-handle = <0xa>;
> - phy-mode = "xgmii";
> - dma-coherent;
> - iommus = <&xgmac1_smmu 0x00 0x1f>; /* 0-31 */
> - linux,phandle = <0xc>;
> - phandle = <0xc>;
> - };
> - };
> -
> - chosen {
> - stdout-path = "/smb/serial@e1010000";
> - /* Note:
> - * Linux support for pci-probe-only DT is not
> - * stable. Disable this for now and let Linux
> - * take care of the resource assignment.
> - */
> - // linux,pci-probe-only;
> - };
> -
> - psci {
> - compatible = "arm,psci-0.2", "arm,psci";
> - method = "smc";
> - };
> -};
> diff --git a/Platform/AMD/OverdriveBoard/OverdriveBoard.dsc b/Platform/AMD/OverdriveBoard/OverdriveBoard.dsc
> index bc69c586e929..081a4f3cd002 100644
> --- a/Platform/AMD/OverdriveBoard/OverdriveBoard.dsc
> +++ b/Platform/AMD/OverdriveBoard/OverdriveBoard.dsc
> @@ -600,6 +600,7 @@ DEFINE DO_FLASHER = FALSE
> #
> # FDT support
> #
> + Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.inf
> EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf {
> <LibraryClasses>
> FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
> diff --git a/Platform/AMD/OverdriveBoard/OverdriveBoard.fdf b/Platform/AMD/OverdriveBoard/OverdriveBoard.fdf
> index 23e57befcdd9..aa2a1a6fa053 100644
> --- a/Platform/AMD/OverdriveBoard/OverdriveBoard.fdf
> +++ b/Platform/AMD/OverdriveBoard/OverdriveBoard.fdf
> @@ -145,10 +145,7 @@ READ_LOCK_STATUS = TRUE
> # FDT support
> #
> INF EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf
> -
> - FILE FREEFORM = 25462CDA-221F-47DF-AC1D-259CFAA4E326 {
> - SECTION RAW = Platform/AMD/OverdriveBoard/FdtBlob/styx-overdrive.dtb
> - }
> + INF RuleOverride = DTB Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.inf
>
> #
> # PCI support
> @@ -413,3 +410,7 @@ READ_LOCK_STATUS = TRUE
> RAW ASL |.aml
> }
>
> +[Rule.Common.USER_DEFINED.DTB]
> + FILE FREEFORM = $(NAMED_GUID) {
> + RAW BIN |.dtb
> + }
> diff --git a/Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.dts b/Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.dts
> new file mode 100644
> index 000000000000..2c05fdbb8b71
> --- /dev/null
> +++ b/Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.dts
> @@ -0,0 +1,487 @@
> +/*
> + * DTS file for AMD Seattle (Rev.B) Overdrive Development Board
> + *
> + * Copyright 2015 - 2016 ADVANCED MICRO DEVICES, INC. All Rights Reserved.
> + * Copyright 2015 - 2017 Linaro, Ltd. All Rights Reserved.
> + *
> + * This program and the accompanying materials are licensed and made available
> + * under the terms and conditions of the BSD License which accompanies this
> + * distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
> + * IMPLIED.
> + *
> + */
> +
> +#define GIC_SPI 0
> +#define GIC_PPI 1
> +
> +#define IRQ_TYPE_NONE 0
> +#define IRQ_TYPE_EDGE_RISING 1
> +#define IRQ_TYPE_EDGE_FALLING 2
> +#define IRQ_TYPE_LEVEL_HIGH 4
> +#define IRQ_TYPE_LEVEL_LOW 8
> +
> +#define GIC_CPU_MASK(num) (((1 << (num)) - 1) << 8)
> +
> +/dts-v1/;
> +
> +/ {
> + model = "AMD Seattle (Rev.B) Development Board (Overdrive)";
> + compatible = "amd,seattle-overdrive", "amd,seattle";
> + interrupt-parent = <&gic>;
> + #address-cells = <0x2>;
> + #size-cells = <0x2>;
> +
> + gic: interrupt-controller@e1101000 {
> + compatible = "arm,gic-400", "arm,cortex-a15-gic";
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
> + #address-cells = <0x2>;
> + #size-cells = <0x2>;
> + reg = <0x0 0xe1110000 0x0 0x1000>,
> + <0x0 0xe112f000 0x0 0x2000>,
> + <0x0 0xe1140000 0x0 0x2000>,
> + <0x0 0xe1160000 0x0 0x2000>;
> + interrupts = <GIC_PPI 0x9 (IRQ_TYPE_LEVEL_HIGH | GIC_CPU_MASK(8))>;
> + ranges = <0x0 0x0 0x0 0xe1100000 0x0 0x100000>;
> +
> + msi: v2m@e0080000 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x0 0x80000 0x0 0x1000>;
> + msi-controller;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 0xd (IRQ_TYPE_LEVEL_HIGH | GIC_CPU_MASK(8))>,
> + <GIC_PPI 0xe (IRQ_TYPE_LEVEL_HIGH | GIC_CPU_MASK(8))>,
> + <GIC_PPI 0xb (IRQ_TYPE_LEVEL_HIGH | GIC_CPU_MASK(8))>,
> + <GIC_PPI 0xa (IRQ_TYPE_LEVEL_HIGH | GIC_CPU_MASK(8))>;
> + };
> +
> + smb {
> + compatible = "simple-bus";
> + #address-cells = <0x2>;
> + #size-cells = <0x2>;
> + ranges;
> + /*
> + * dma-ranges is 40-bit address space containing:
> + * - GICv2m MSI register is at 0xe0080000
> + * - DRAM range [0x8000000000 to 0xffffffffff]
> + */
> + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
> +
> + adl3clk: clk100mhz_0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <100000000>;
> + clock-output-names = "adl3clk_100mhz";
> + };
> +
> + ccpclk: clk375mhz {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <375000000>;
> + clock-output-names = "ccpclk_375mhz";
> + };
> +
> + sataclk: clk333mhz {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <333000000>;
> + clock-output-names = "sataclk_333mhz";
> + };
> +
> + pcieclk: clk500mhz_0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <500000000>;
> + clock-output-names = "pcieclk_500mhz";
> + };
> +
> + dmaclk: clk500mhz_1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <500000000>;
> + clock-output-names = "dmaclk_500mhz";
> + };
> +
> + miscclk: clk250mhz_4 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <250000000>;
> + clock-output-names = "miscclk_250mhz";
> + };
> +
> + uartspiclk: clk100mhz_1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <100000000>;
> + clock-output-names = "uartspiclk_100mhz";
> + };
> +
> + sata0_smmu: smmu@e0200000 {
> + compatible = "arm,mmu-401";
> + reg = <0 0xe0200000 0 0x10000>;
> +
> + /* Uses combined intr for both global and context */
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> + #iommu-cells = <2>;
> + dma-coherent;
> + };
> +
> + sata1_smmu: smmu@e0c00000 {
> + compatible = "arm,mmu-401";
> + reg = <0 0xe0c00000 0 0x10000>;
> +
> + /* Uses combined intr for both global and context */
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + #iommu-cells = <2>;
> + dma-coherent;
> + };
> +
> + sata@e0300000 {
> + compatible = "snps,dwc-ahci";
> + reg = <0x0 0xe0300000 0x0 0xf0000>;
> + interrupts = <GIC_SPI 0x163 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sataclk>;
> + dma-coherent;
> + iommus = <&sata0_smmu 0x00 0x1f>; /* 0-31 */
> + };
> +
> + sata@e0d00000 {
> + status = "disabled";
> + compatible = "snps,dwc-ahci";
> + reg = <0x0 0xe0d00000 0x0 0xf0000>;
> + interrupts = <GIC_SPI 0x162 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sataclk>;
> + dma-coherent;
> + iommus = <&sata1_smmu 0x00 0x1f>; /* 0-31 */
> + };
> +
> + i2c@e1000000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xe1000000 0x0 0x1000>;
> + interrupts = <GIC_SPI 0x165 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&miscclk>;
> + };
> +
> + i2c@e0050000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xe0050000 0x0 0x1000>;
> + interrupts = <GIC_SPI 0x154 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&miscclk>;
> + };
> +
> + serial@e1010000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x0 0xe1010000 0x0 0x1000>;
> + interrupts = <GIC_SPI 0x148 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uartspiclk &uartspiclk>;
> + clock-names = "uartclk", "apb_pclk";
> + };
> +
> + ssp@e1020000 {
> + compatible = "arm,pl022", "arm,primecell";
> + reg = <0x0 0xe1020000 0x0 0x1000>;
> + spi-controller;
> + interrupts = <GIC_SPI 0x14a IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uartspiclk>;
> + clock-names = "apb_pclk";
> + };
> +
> + ssp@e1030000 {
> + compatible = "arm,pl022", "arm,primecell";
> + reg = <0x0 0xe1030000 0x0 0x1000>;
> + spi-controller;
> + interrupts = <GIC_SPI 0x149 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uartspiclk>;
> + clock-names = "apb_pclk";
> + num-cs = <0x1>;
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> +
> + sdcard@0 {
> + compatible = "mmc-spi-slot";
> + reg = <0x0>;
> + spi-max-frequency = <20000000>;
> + voltage-ranges = <3200 3400>;
> + pl022,hierarchy = <0x0>;
> + pl022,interface = <0x0>;
> + pl022,com-mode = <0x0>;
> + pl022,rx-level-trig = <0x0>;
> + pl022,tx-level-trig = <0x0>;
> + };
> + };
> +
> + gpio@e1050000 { /* [0 : 7] */
> + compatible = "arm,pl061", "arm,primecell";
> + #gpio-cells = <0x2>;
> + reg = <0x0 0xe1050000 0x0 0x1000>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + interrupts = <GIC_SPI 0x166 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uartspiclk>;
> + clock-names = "apb_pclk";
> + };
> +
> + gpio@e0020000 { /* [8 : 15] */
> + status = "disabled";
> + compatible = "arm,pl061", "arm,primecell";
> + #gpio-cells = <0x2>;
> + reg = <0x0 0xe0020000 0x0 0x1000>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + interrupts = <GIC_SPI 0x16e IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uartspiclk>;
> + clock-names = "apb_pclk";
> + };
> +
> + gpio@e0030000 { /* [16 : 23] */
> + status = "disabled";
> + compatible = "arm,pl061", "arm,primecell";
> + #gpio-cells = <0x2>;
> + reg = <0x0 0xe0030000 0x0 0x1000>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + interrupts = <GIC_SPI 0x16d IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uartspiclk>;
> + clock-names = "apb_pclk";
> + };
> +
> + gpio@e0080000 { /* [24] */
> + compatible = "arm,pl061", "arm,primecell";
> + #gpio-cells = <0x2>;
> + reg = <0x0 0xe0080000 0x0 0x1000>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + interrupts = <GIC_SPI 0x169 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uartspiclk>;
> + clock-names = "apb_pclk";
> + };
> +
> + ccp: ccp@e0100000 {
> + compatible = "amd,ccp-seattle-v1a";
> + reg = <0x0 0xe0100000 0x0 0x10000>;
> + interrupts = <GIC_SPI 0x3 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> + amd,zlib-support = <0x1>;
> + };
> +
> + pcie: pcie@f0000000 {
> + compatible = "pci-host-ecam-generic";
> + #address-cells = <0x3>;
> + #size-cells = <0x2>;
> + #interrupt-cells = <0x1>;
> + iommu-map = <0x0 &pcie_smmu 0x0 0x10000>;
> + device_type = "pci";
> + bus-range = <0x0 0x7f>;
> + msi-parent = <&msi>;
> + reg = <0x0 0xf0000000 0x0 0x10000000>;
> + interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
> + interrupt-map = <0x1100 0x0 0x0 0x1 &gic 0x0 0x0 GIC_SPI 0x120 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1100 0x0 0x0 0x2 &gic 0x0 0x0 GIC_SPI 0x121 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1100 0x0 0x0 0x3 &gic 0x0 0x0 GIC_SPI 0x122 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1100 0x0 0x0 0x4 &gic 0x0 0x0 GIC_SPI 0x123 IRQ_TYPE_LEVEL_HIGH>,
> +
> + <0x1200 0x0 0x0 0x1 &gic 0x0 0x0 GIC_SPI 0x124 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1200 0x0 0x0 0x2 &gic 0x0 0x0 GIC_SPI 0x125 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1200 0x0 0x0 0x3 &gic 0x0 0x0 GIC_SPI 0x126 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1200 0x0 0x0 0x4 &gic 0x0 0x0 GIC_SPI 0x127 IRQ_TYPE_LEVEL_HIGH>,
> +
> + <0x1300 0x0 0x0 0x1 &gic 0x0 0x0 GIC_SPI 0x128 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1300 0x0 0x0 0x2 &gic 0x0 0x0 GIC_SPI 0x129 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1300 0x0 0x0 0x3 &gic 0x0 0x0 GIC_SPI 0x12a IRQ_TYPE_LEVEL_HIGH>,
> + <0x1300 0x0 0x0 0x4 &gic 0x0 0x0 GIC_SPI 0x12b IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> + dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
> + ranges = <0x1000000 0x0 0x00000000 0x0 0xefff0000 0x00 0x00010000>, /* I/O Memory (size=64K) */
> + <0x2000000 0x0 0x40000000 0x0 0x40000000 0x00 0x80000000>, /* 32-bit MMIO (size=2G) */
> + <0x3000000 0x1 0x00000000 0x1 0x00000000 0x7f 0x00000000>; /* 64-bit MMIO (size= 124G) */
> + };
> +
> + pcie_smmu: smmu@e0a00000 {
> + compatible = "arm,mmu-401";
> + reg = <0 0xe0a00000 0 0x10000>;
> +
> + /* Uses combined intr for both global and context */
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
> + #iommu-cells = <1>;
> + dma-coherent;
> + };
> +
> + ccn@0xe8000000 {
> + compatible = "arm,ccn-504";
> + reg = <0x0 0xe8000000 0x0 0x1000000>;
> + interrupts = <GIC_SPI 0x17c IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gwdt@e0bb0000 {
> + status = "disabled";
> + compatible = "arm,sbsa-gwdt";
> + reg = <0x0 0xe0bb0000 0x0 0x10000
> + 0x0 0xe0bc0000 0x0 0x10000>;
> + reg-names = "refresh", "control";
> + interrupts = <GIC_SPI 0x151 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "ws0";
> + };
> +
> + kcs@e0010000 {
> + status = "disabled";
> + compatible = "ipmi-kcs";
> + device_type = "ipmi";
> + reg = <0x0 0xe0010000 0 0x8>;
> + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "ipmi_kcs";
> + reg-size = <1>;
> + reg-spacing = <4>;
> + };
> +
> + xgmacclk0_dma: clk250mhz_0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <250000000>;
> + clock-output-names = "xgmacclk0_dma_250mhz";
> + };
> +
> + xgmacclk0_ptp: clk250mhz_1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <250000000>;
> + clock-output-names = "xgmacclk0_ptp_250mhz";
> + };
> +
> + xgmacclk1_dma: clk250mhz_2 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <250000000>;
> + clock-output-names = "xgmacclk1_dma_250mhz";
> + };
> +
> + xgmacclk1_ptp: clk250mhz_3 {
> + compatible = "fixed-clock";
> + #clock-cells = <0x0>;
> + clock-frequency = <250000000>;
> + clock-output-names = "xgmacclk1_ptp_250mhz";
> + };
> +
> + xgmac0_phy: phy@e1240800 {
> + compatible = "amd,xgbe-phy-seattle-v1a";
> + reg = <0x0 0xe1240800 0x0 0x0400>, /* SERDES RX/TX0 */
> + <0x0 0xe1250000 0x0 0x0060>, /* SERDES IR 1/2 */
> + <0x0 0xe12500f8 0x0 0x0004>; /* SERDES IR 2/2 */
> + interrupts = <GIC_SPI 0x143 IRQ_TYPE_LEVEL_HIGH>;
> + amd,speed-set = <0x0>;
> + amd,serdes-blwc = <0x1 0x1 0x0>;
> + amd,serdes-cdr-rate = <0x2 0x2 0x7>;
> + amd,serdes-pq-skew = <0xa 0xa 0x12>;
> + amd,serdes-tx-amp = <0xf 0xf 0xa>;
> + amd,serdes-dfe-tap-config = <0x3 0x3 0x1>;
> + amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>;
> + status = "disabled";
> + };
> +
> + xgmac1_phy: phy@e1240c00 {
> + compatible = "amd,xgbe-phy-seattle-v1a";
> + reg = <0x0 0xe1240c00 0x0 0x0400>, /* SERDES RX/TX0 */
> + <0x0 0xe1250080 0x0 0x0060>, /* SERDES IR 1/2 */
> + <0x0 0xe12500fc 0x0 0x0004>; /* SERDES IR 2/2 */
> + interrupts = <GIC_SPI 0x142 IRQ_TYPE_LEVEL_HIGH>;
> + amd,speed-set = <0x0>;
> + amd,serdes-blwc = <0x1 0x1 0x0>;
> + amd,serdes-cdr-rate = <0x2 0x2 0x7>;
> + amd,serdes-pq-skew = <0xa 0xa 0x12>;
> + amd,serdes-tx-amp = <0xf 0xf 0xa>;
> + amd,serdes-dfe-tap-config = <0x3 0x3 0x1>;
> + amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>;
> + status = "disabled";
> + };
> +
> + xgmac0_smmu: smmu@e0600000 {
> + compatible = "arm,mmu-401";
> + reg = <0 0xe0600000 0 0x10000>;
> +
> + /* Uses combined intr for both global and context */
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
> + #iommu-cells = <2>;
> + dma-coherent;
> + };
> +
> + xgmac1_smmu: smmu@e0800000 {
> + compatible = "arm,mmu-401";
> + reg = <0 0xe0800000 0 0x10000>;
> +
> + /* Uses combined intr for both global and context */
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
> + #iommu-cells = <2>;
> + dma-coherent;
> + };
> +
> + xgmac@e0700000 {
> + compatible = "amd,xgbe-seattle-v1a";
> + reg = <0x0 0xe0700000 0x0 0x80000 0x0 0xe0780000 0x0 0x80000>;
> + interrupts = <GIC_SPI 0x145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 0x15a IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 0x15b IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 0x15c IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 0x15d IRQ_TYPE_EDGE_RISING>;
> + amd,per-channel-interrupt;
> + mac-address = [02 a1 a2 a3 a4 a5];
> + clocks = <&xgmacclk0_dma &xgmacclk0_ptp>;
> + clock-names = "dma_clk", "ptp_clk";
> + phy-handle = <&xgmac0_phy>;
> + phy-mode = "xgmii";
> +
> + iommus = <&xgmac0_smmu 0x00 0x1f>; /* 0-31 */
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + xgmac@e0900000 {
> + compatible = "amd,xgbe-seattle-v1a";
> + reg = <0x0 0xe0900000 0x0 0x80000 0x0 0xe0980000 0x0 0x80000>;
> + interrupts = <GIC_SPI 0x144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 0x155 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 0x156 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 0x157 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 0x158 IRQ_TYPE_EDGE_RISING>;
> + amd,per-channel-interrupt;
> + mac-address = [02 b1 b2 b3 b4 b5];
> + clocks = <&xgmacclk1_dma &xgmacclk1_ptp>;
> + clock-names = "dma_clk", "ptp_clk";
> + phy-handle = <&xgmac1_phy>;
> + phy-mode = "xgmii";
> +
> + iommus = <&xgmac1_smmu 0x00 0x1f>; /* 0-31 */
> + dma-coherent;
> + status = "disabled";
> + };
> + };
> +
> + chosen {
> + stdout-path = "/smb/serial@e1010000";
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2", "arm,psci";
> + method = "smc";
> + };
> +};
> diff --git a/Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.inf b/Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.inf
> new file mode 100644
> index 000000000000..9ecf993cafac
> --- /dev/null
> +++ b/Platform/AMD/OverdriveBoard/OverdriveBoardDeviceTree/OverdriveBoardDeviceTree.inf
> @@ -0,0 +1,28 @@
> +## @file
> +#
> +# Device tree description of the AMD Seattle Overdrive platform
> +#
> +# Copyright (c) 2017, Linaro Ltd. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x00010019
> + BASE_NAME = OverdriveBoardDeviceTree
> + FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
> + MODULE_TYPE = USER_DEFINED
> + VERSION_STRING = 1.0
> +
> +[Sources]
> + OverdriveBoardDeviceTree.dts
> +
> +[Packages]
> + MdePkg/MdePkg.dec
next prev parent reply other threads:[~2017-08-29 19:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-29 16:27 [PATCH edk2-platforms] Platform/OverdriveBoard: move device tree compilation into build Ard Biesheuvel
2017-08-29 19:26 ` Alan Ott [this message]
2017-08-29 19:28 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f0611bfa-d383-2d5e-68fc-58f4ae6c2b39@softiron.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox