Hi Girish, Apologies for the delay in reply and thank you for this patch and for sharing the link to the github branch. I have also posted a v2 series for the SMBIOS dispatcher at https://edk2.groups.io/g/devel/message/100833. Any feedback would be most appreciated. It appears that DynamicTableManagerDxe.c and AcpiTableBuilder.c are a mix of latest edk2 upstream and an older version. Can you check, please? Also, this patch could be split into smaller chunks. Other than that, please see my response inline marked [SAMI]. Regards, Sami Mujawar On 27/01/2023 11:58 pm, Girish Mahadevan wrote: > Add the SMBIOS Table generator code to the DynamicTablesPkg. > > This change includes adding new logic to the DynamicTableManager > to process and add SMBIOS tables and augmenting the existing SMBIOS > Factory generator to include installing multiple SMBIOS tables . > Also included is running the SMBIOS and ACPI table generation as part > of the SMBIOS and ACPI protocol GUID callback notifications respectively. > > The change can be seen at > https://github.com/gmahadevan/edk2-upstream/commits/RFC/smbios-dyntables > > Signed-off-by: Girish Mahadevan > Reviewed-by: Jeff Brasen > --- > .../DynamicTableFactory.h | 5 + > .../DynamicTableFactoryDxe.c | 7 + > .../SmbiosTableFactory/SmbiosTableFactory.c | 66 ++ > .../DynamicTableManagerDxe/AcpiTableBuilder.c | 732 ++++++++++++++++ > .../DynamicTableManagerDxe.c | 794 +----------------- > .../DynamicTableManagerDxe.inf | 5 +- > .../SmbiosTableBuilder.c | 608 ++++++++++++++ > .../Include/ConfigurationManagerObject.h | 18 +- > .../Protocol/DynamicTableFactoryProtocol.h | 8 + > .../Include/SmbiosTableGenerator.h | 165 +++- > 10 files changed, 1653 insertions(+), 755 deletions(-) > create mode 100644 DynamicTablesPkg/Drivers/DynamicTableManagerDxe/AcpiTableBuilder.c > create mode 100644 DynamicTablesPkg/Drivers/DynamicTableManagerDxe/SmbiosTableBuilder.c > > diff --git a/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactory.h b/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactory.h > index b160dcf8ad..20e438ea70 100644 > --- a/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactory.h > +++ b/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactory.h > @@ -49,6 +49,11 @@ typedef struct DynamicTableFactoryInfo { > CustomDtTableGeneratorList[FixedPcdGet16 ( > PcdMaxCustomDTGenerators > )]; > + > + /// An array for holding a map of SMBIOS handles and the CM Object > + /// token used to build the SMBIOS record. > + SMBIOS_HANDLE_MAP > + SmbiosHandleMap[MAX_SMBIOS_HANDLES]; > } EDKII_DYNAMIC_TABLE_FACTORY_INFO; > > /** Return a pointer to the ACPI table generator. > diff --git a/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactoryDxe.c b/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactoryDxe.c > index 6d6d3fa746..d0ee5d7b3b 100644 > --- a/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactoryDxe.c > +++ b/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactoryDxe.c > @@ -44,6 +44,8 @@ EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL DynamicTableFactoryProtocol = { > GetDtTableGenerator, > RegisterDtTableGenerator, > DeregisterDtTableGenerator, > + AddSmbiosHandle, > + FindSmbiosHandle, > &TableFactoryInfo > }; > > @@ -65,7 +67,12 @@ DynamicTableFactoryDxeInitialize ( > ) > { > EFI_STATUS Status; > + UINTN Idx; > > + for (Idx = 0; Idx < MAX_SMBIOS_HANDLES; Idx++) { > + TableFactoryInfo.SmbiosHandleMap[Idx].SmbiosTblHandle = SMBIOS_HANDLE_PI_RESERVED; > + TableFactoryInfo.SmbiosHandleMap[Idx].SmbiosCmToken = 0; > + } > Status = gBS->InstallProtocolInterface ( > &ImageHandle, > &gEdkiiDynamicTableFactoryProtocolGuid, > diff --git a/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/SmbiosTableFactory/SmbiosTableFactory.c b/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/SmbiosTableFactory/SmbiosTableFactory.c > index 87795919f8..b81724d2a0 100644 > --- a/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/SmbiosTableFactory/SmbiosTableFactory.c > +++ b/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/SmbiosTableFactory/SmbiosTableFactory.c > @@ -12,6 +12,7 @@ > #include > #include > #include > +#include > #include > > // Module specific include files. > @@ -24,6 +25,71 @@ > > extern EDKII_DYNAMIC_TABLE_FACTORY_INFO TableFactoryInfo; > > +/** Add a new entry to the SMBIOS table Map. > + > + @param [in] Smbios SMBIOS Protocol pointer. > + @param [in] SmbiosHandle SMBIOS Handle to be added, if the value SMBIOS_HANDLE_PI_RESERVED > + is passed then a new SmbiosHandle is assigned. [SAMI] I think the SmbiosHandle documentation needs updating. > + @param [in] CmObjectToken CmObjectToken of the CM_OBJECT used to build the SMBIOS Table > + @param [in] SmbiosId Smbios Table Generator Id. > + > + @retval EFI_SUCCESS Successfully added/generated the handle. > + @retval EFI_OUT_OF_RESOURCESNULL Failure to add/generate the handle. > +**/ > +EFI_STATUS > +EFIAPI > +AddSmbiosHandle ( > + IN EFI_SMBIOS_PROTOCOL *Smbios, > + IN SMBIOS_HANDLE *SmbiosHandle, > + IN CM_OBJECT_TOKEN CmObjectToken, > + IN ESTD_SMBIOS_TABLE_ID SmbiosId > + ) > +{ > + EFI_STATUS Status; > + UINTN Index; > + > + Status = EFI_OUT_OF_RESOURCES; > + > + for (Index = 0; Index < MAX_SMBIOS_HANDLES; Index++) { > + if (TableFactoryInfo.SmbiosHandleMap[Index].SmbiosTblHandle == SMBIOS_HANDLE_PI_RESERVED) { > + TableFactoryInfo.SmbiosHandleMap[Index].SmbiosTblHandle = *SmbiosHandle; > + TableFactoryInfo.SmbiosHandleMap[Index].SmbiosCmToken = CmObjectToken; > + TableFactoryInfo.SmbiosHandleMap[Index].SmbiosTableId = SmbiosId; > + Status = EFI_SUCCESS; > + break; > + } > + } > + > + return Status; > +} > + > +/** Return a pointer to the SMBIOS table Map. > + > + @param [in] GeneratorId The CmObjectToken to look up an SMBIOS Handle. [SAMI] GeneratorId ==> CmObjectToken > + > + @retval SMBIOS_HANDLE_MAP if the CmObjectToken is found. > + @retval NULL if not found. > +**/ > +SMBIOS_HANDLE_MAP * > +EFIAPI > +FindSmbiosHandle ( > + CM_OBJECT_TOKEN CmObjectToken > + ) > +{ > + UINTN Index; > + SMBIOS_HANDLE_MAP *SmbiosHandleMap; > + > + SmbiosHandleMap = NULL; > + for (Index = 0; Index < MAX_SMBIOS_HANDLES; Index++) { > + if (TableFactoryInfo.SmbiosHandleMap[Index].SmbiosCmToken == CmObjectToken) { > + SmbiosHandleMap = &TableFactoryInfo.SmbiosHandleMap[Index]; > + break; > + } > + } > + > + return SmbiosHandleMap; > +} > + > /** Return a pointer to the SMBIOS table generator. > > @param [in] This Pointer to the Dynamic Table Factory Protocol. > diff --git a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/AcpiTableBuilder.c b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/AcpiTableBuilder.c > new file mode 100644 > index 0000000000..5021eab748 > --- /dev/null > +++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/AcpiTableBuilder.c > @@ -0,0 +1,732 @@ > +/** @file > + Dynamic Table Manager Dxe > + > + Copyright (c) 2017 - 2019, ARM Limited. All rights reserved. > + Copyright (c) 2022 - 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved. > + > + SPDX-License-Identifier: BSD-2-Clause-Patent > + > +**/ > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +// Module specific include files. > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/** This macro expands to a function that retrieves the ACPI Table > + List from the Configuration Manager. > +*/ > +GET_OBJECT_LIST ( > + EObjNameSpaceStandard, > + EStdObjAcpiTableList, > + CM_STD_OBJ_ACPI_TABLE_INFO > + ) > + > +/** A helper function to build and install a single ACPI table. > + > + This is a helper function that invokes the Table generator interface > + for building an ACPI table. It uses the AcpiTableProtocol to install the > + table, then frees the resources allocated for generating it. > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + @param [in] Generator Pointer to the AcpiTable generator. > + @param [in] AcpiTableProtocol Pointer to the AcpiTable protocol. > + @param [in] AcpiTableInfo Pointer to the ACPI table Info. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_INVALID_PARAMETER A parameter is invalid. > + @retval EFI_NOT_FOUND Required object is not found. > + @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > + is less than the Object size for the > + requested object. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +BuildAndInstallSingleAcpiTable ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + IN CONST ACPI_TABLE_GENERATOR *CONST Generator, > + IN EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol, > + IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo > + ) > +{ > + EFI_STATUS Status; > + EFI_STATUS Status1; > + EFI_ACPI_DESCRIPTION_HEADER *AcpiTable; > + UINTN TableHandle; > + > + AcpiTable = NULL; > + Status = Generator->BuildAcpiTable ( > + Generator, > + AcpiTableInfo, > + CfgMgrProtocol, > + &AcpiTable > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Build Table." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + AcpiTableInfo->TableGeneratorId, > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + if (AcpiTable == NULL) { > + Status = EFI_NOT_FOUND; > + goto exit_handler; > + } > + > + // Dump ACPI Table Header > + DUMP_ACPI_TABLE_HEADER (AcpiTable); > + > + // Install ACPI table > + Status = AcpiTableProtocol->InstallAcpiTable ( > + AcpiTableProtocol, > + AcpiTable, > + AcpiTable->Length, > + &TableHandle > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Install ACPI Table. Status = %r\n", > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: ACPI Table installed. Status = %r\n", > + Status > + )); > + > +exit_handler: > + // Free any resources allocated for generating the tables. > + if (Generator->FreeTableResources != NULL) { > + Status1 = Generator->FreeTableResources ( > + Generator, > + AcpiTableInfo, > + CfgMgrProtocol, > + &AcpiTable > + ); > + if (EFI_ERROR (Status1)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Free Table Resources." \ > + "TableGeneratorId = 0x%x. Status = %r\n", > + AcpiTableInfo->TableGeneratorId, > + Status1 > + )); > + } > + > + // Return the first error status in case of failure > + if (!EFI_ERROR (Status)) { > + Status = Status1; > + } > + } > + > + return Status; > +} > + > +/** A helper function to build and install multiple ACPI tables. > + > + This is a helper function that invokes the Table generator interface > + for building an ACPI table. It uses the AcpiTableProtocol to install the > + table, then frees the resources allocated for generating it. > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + @param [in] Generator Pointer to the AcpiTable generator. > + @param [in] AcpiTableProtocol Pointer to the AcpiTable protocol. > + @param [in] AcpiTableInfo Pointer to the ACPI table Info. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_INVALID_PARAMETER A parameter is invalid. > + @retval EFI_NOT_FOUND Required object is not found. > + @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > + is less than the Object size for the > + requested object. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +BuildAndInstallMultipleAcpiTable ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + IN CONST ACPI_TABLE_GENERATOR *CONST Generator, > + IN EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol, > + IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo > + ) > +{ > + EFI_STATUS Status; > + EFI_STATUS Status1; > + EFI_ACPI_DESCRIPTION_HEADER **AcpiTable; > + UINTN TableCount; > + UINTN TableHandle; > + UINTN Index; > + > + AcpiTable = NULL; > + TableCount = 0; > + Status = Generator->BuildAcpiTableEx ( > + Generator, > + AcpiTableInfo, > + CfgMgrProtocol, > + &AcpiTable, > + &TableCount > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Build Table." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + AcpiTableInfo->TableGeneratorId, > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + if ((AcpiTable == NULL) || (TableCount == 0)) { > + Status = EFI_NOT_FOUND; > + goto exit_handler; > + } > + > + for (Index = 0; Index < TableCount; Index++) { > + // Dump ACPI Table Header > + DUMP_ACPI_TABLE_HEADER (AcpiTable[Index]); > + // Install ACPI table > + Status = AcpiTableProtocol->InstallAcpiTable ( > + AcpiTableProtocol, > + AcpiTable[Index], > + AcpiTable[Index]->Length, > + &TableHandle > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Install ACPI Table. Status = %r\n", > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: ACPI Table installed. Status = %r\n", > + Status > + )); > + } > + > +exit_handler: > + // Free any resources allocated for generating the tables. > + if (Generator->FreeTableResourcesEx != NULL) { > + Status1 = Generator->FreeTableResourcesEx ( > + Generator, > + AcpiTableInfo, > + CfgMgrProtocol, > + &AcpiTable, > + TableCount > + ); > + if (EFI_ERROR (Status1)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Free Table Resources." \ > + "TableGeneratorId = 0x%x. Status = %r\n", > + AcpiTableInfo->TableGeneratorId, > + Status1 > + )); > + } > + > + // Return the first error status in case of failure > + if (!EFI_ERROR (Status)) { > + Status = Status1; > + } > + } > + > + return Status; > +} > + > +/** A helper function to invoke a Table generator > + > + This is a helper function that invokes the Table generator interface > + for building an ACPI table. It uses the AcpiTableProtocol to install the > + table, then frees the resources allocated for generating it. > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + @param [in] AcpiTableProtocol Pointer to the AcpiTable protocol. > + @param [in] AcpiTableInfo Pointer to the ACPI table Info. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_INVALID_PARAMETER A parameter is invalid. > + @retval EFI_NOT_FOUND Required object is not found. > + @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > + is less than the Object size for the > + requested object. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +BuildAndInstallAcpiTable ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + IN EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol, > + IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo > + ) > +{ > + EFI_STATUS Status; > + CONST ACPI_TABLE_GENERATOR *Generator; > + > + ASSERT (TableFactoryProtocol != NULL); > + ASSERT (CfgMgrProtocol != NULL); > + ASSERT (AcpiTableProtocol != NULL); > + ASSERT (AcpiTableInfo != NULL); > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: EStdObjAcpiTableList: Address = 0x%p," \ > + " TableGeneratorId = 0x%x\n", > + AcpiTableInfo, > + AcpiTableInfo->TableGeneratorId > + )); > + > + Generator = NULL; > + Status = TableFactoryProtocol->GetAcpiTableGenerator ( > + TableFactoryProtocol, > + AcpiTableInfo->TableGeneratorId, > + &Generator > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Table Generator not found." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + AcpiTableInfo->TableGeneratorId, > + Status > + )); > + return Status; > + } > + > + if (Generator == NULL) { > + return EFI_NOT_FOUND; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: Generator found : %s\n", > + Generator->Description > + )); > + > + if (Generator->BuildAcpiTableEx != NULL) { > + Status = BuildAndInstallMultipleAcpiTable ( > + TableFactoryProtocol, > + CfgMgrProtocol, > + Generator, > + AcpiTableProtocol, > + AcpiTableInfo > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find build and install ACPI Table." \ > + " Status = %r\n", > + Status > + )); > + } > + } else if (Generator->BuildAcpiTable != NULL) { > + Status = BuildAndInstallSingleAcpiTable ( > + TableFactoryProtocol, > + CfgMgrProtocol, > + Generator, > + AcpiTableProtocol, > + AcpiTableInfo > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find build and install ACPI Table." \ > + " Status = %r\n", > + Status > + )); > + } > + } else { > + Status = EFI_INVALID_PARAMETER; > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Table Generator does not implement the" \ > + " ACPI_TABLE_GENERATOR_BUILD_TABLE interface." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + AcpiTableInfo->TableGeneratorId, > + Status > + )); > + } > + > + return Status; > +} > + > +/** The function checks if the Configuration Manager has provided the > + mandatory ACPI tables for installation. > + > + @param [in] AcpiTableInfo Pointer to the ACPI Table Info list. > + @param [in] AcpiTableCount Count of ACPI Table Info. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_NOT_FOUND If mandatory table is not found. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +VerifyMandatoryTablesArePresent ( > + IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo, > + IN UINT32 AcpiTableCount > + ) > +{ > + EFI_STATUS Status; > + BOOLEAN FadtFound; > + BOOLEAN MadtFound; > + BOOLEAN GtdtFound; > + BOOLEAN DsdtFound; > + BOOLEAN Dbg2Found; > + BOOLEAN SpcrFound; > + > + Status = EFI_SUCCESS; > + FadtFound = FALSE; > + MadtFound = FALSE; > + GtdtFound = FALSE; > + DsdtFound = FALSE; > + Dbg2Found = FALSE; > + SpcrFound = FALSE; > + ASSERT (AcpiTableInfo != NULL); > + > + while (AcpiTableCount-- != 0) { > + switch (AcpiTableInfo[AcpiTableCount].AcpiTableSignature) { > + case EFI_ACPI_6_2_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE: > + FadtFound = TRUE; > + break; > + case EFI_ACPI_6_2_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE: > + MadtFound = TRUE; > + break; > + case EFI_ACPI_6_2_GENERIC_TIMER_DESCRIPTION_TABLE_SIGNATURE: > + GtdtFound = TRUE; > + break; > + case EFI_ACPI_6_2_DIFFERENTIATED_SYSTEM_DESCRIPTION_TABLE_SIGNATURE: > + DsdtFound = TRUE; > + break; > + case EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE: > + Dbg2Found = TRUE; > + break; > + case EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE: > + SpcrFound = TRUE; > + break; > + default: > + break; > + } > + } > + > + // We need at least the FADT, MADT, GTDT and the DSDT tables to boot > + if (!FadtFound) { > + DEBUG ((DEBUG_ERROR, "ERROR: FADT Table not found\n")); > + Status = EFI_NOT_FOUND; > + } > + > + if (!MadtFound) { > + DEBUG ((DEBUG_ERROR, "ERROR: MADT Table not found.\n")); > + Status = EFI_NOT_FOUND; > + } > + > + if (!GtdtFound) { > + DEBUG ((DEBUG_ERROR, "ERROR: GTDT Table not found.\n")); > + Status = EFI_NOT_FOUND; > + } > + > + if (!DsdtFound) { > + DEBUG ((DEBUG_ERROR, "ERROR: DSDT Table not found.\n")); > + Status = EFI_NOT_FOUND; > + } > + > + if (!Dbg2Found) { > + DEBUG ((DEBUG_WARN, "WARNING: DBG2 Table not found.\n")); > + } > + > + if (!SpcrFound) { > + DEBUG ((DEBUG_WARN, "WARNING: SPCR Table not found.\n")); > + } > + > + return Status; > +} > + > +/** Generate and install ACPI tables. > + > + The function gathers the information necessary for installing the > + ACPI tables from the Configuration Manager, invokes the generators > + and installs them (via BuildAndInstallAcpiTable). > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_NOT_FOUND If a mandatory table or a generator is not found. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +ProcessAcpiTables ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol > + ) > +{ > + EFI_STATUS Status; > + EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol; > + CM_STD_OBJ_ACPI_TABLE_INFO *AcpiTableInfo; > + UINT32 AcpiTableCount; > + UINT32 Idx; > + > + ASSERT (TableFactoryProtocol != NULL); > + ASSERT (CfgMgrProtocol != NULL); > + > + // Find the AcpiTable protocol > + Status = gBS->LocateProtocol ( > + &gEfiAcpiTableProtocolGuid, > + NULL, > + (VOID **)&AcpiTableProtocol > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find AcpiTable protocol. Status = %r\n", > + Status > + )); > + return Status; > + } > + > + Status = GetEStdObjAcpiTableList ( > + CfgMgrProtocol, > + CM_NULL_TOKEN, > + &AcpiTableInfo, > + &AcpiTableCount > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to get ACPI Table List. Status = %r\n", > + Status > + )); > + return Status; > + } > + > + if (0 == AcpiTableCount) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: EStdObjAcpiTableList: AcpiTableCount = %d\n", > + AcpiTableCount > + )); > + return EFI_NOT_FOUND; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: EStdObjAcpiTableList: AcpiTableCount = %d\n", > + AcpiTableCount > + )); > + > + // Check if mandatory ACPI tables are present. > + Status = VerifyMandatoryTablesArePresent ( > + AcpiTableInfo, > + AcpiTableCount > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find mandatory ACPI Table(s)." > + " Status = %r\n", > + Status > + )); > + return Status; > + } > + > + // Add the FADT Table first. > + for (Idx = 0; Idx < AcpiTableCount; Idx++) { > + if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) == > + AcpiTableInfo[Idx].TableGeneratorId) > + { > + Status = BuildAndInstallAcpiTable ( > + TableFactoryProtocol, > + CfgMgrProtocol, > + AcpiTableProtocol, > + &AcpiTableInfo[Idx] > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find build and install ACPI FADT Table." \ > + " Status = %r\n", > + Status > + )); > + return Status; > + } > + > + break; > + } > + } // for > + > + // Add remaining ACPI Tables > + for (Idx = 0; Idx < AcpiTableCount; Idx++) { > + DEBUG (( > + DEBUG_INFO, > + "INFO: AcpiTableInfo[%d].TableGeneratorId = 0x%x\n", > + Idx, > + AcpiTableInfo[Idx].TableGeneratorId > + )); > + > + // Skip FADT Table since we have already added > + if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) == > + AcpiTableInfo[Idx].TableGeneratorId) > + { > + continue; > + } > + > + // Skip the Reserved table Generator ID for standard generators > + if ((IS_GENERATOR_NAMESPACE_STD (AcpiTableInfo[Idx].TableGeneratorId)) && > + ((CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdReserved) >= > + AcpiTableInfo[Idx].TableGeneratorId) || > + (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdMax) <= > + AcpiTableInfo[Idx].TableGeneratorId))) > + { > + DEBUG (( > + DEBUG_WARN, > + "WARNING: Invalid ACPI Generator table ID = 0x%x, Skipping...\n", > + AcpiTableInfo[Idx].TableGeneratorId > + )); > + continue; > + } > + > + Status = BuildAndInstallAcpiTable ( > + TableFactoryProtocol, > + CfgMgrProtocol, > + AcpiTableProtocol, > + &AcpiTableInfo[Idx] > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find, build, and install ACPI Table." \ > + " Status = %r\n", > + Status > + )); > + return Status; > + } > + } // for > + > + return Status; > +} > + > +/** Callback Function for Smbios table generation. > + > + Callback function when SMBIOS protocol is installed, this function will then > + invoke the code to install the available SMBIOS tables. > + > + @param Event > + @param Context > + > + @retval None. > +**/ > +VOID > +AcpiTableProtocolReady ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + EFI_STATUS Status; > + EDKII_CONFIGURATION_MANAGER_PROTOCOL *CfgMgrProtocol; > + CM_STD_OBJ_CONFIGURATION_MANAGER_INFO *CfgMfrInfo; > + EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *TableFactoryProtocol; > + > + // Locate the Dynamic Table Factory > + Status = gBS->LocateProtocol ( > + &gEdkiiDynamicTableFactoryProtocolGuid, > + NULL, > + (VOID **)&TableFactoryProtocol > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find Dynamic Table Factory protocol." \ > + " Status = %r\n", > + Status > + )); > + return; > + } > + > + // Locate the Configuration Manager for the Platform > + Status = gBS->LocateProtocol ( > + &gEdkiiConfigurationManagerProtocolGuid, > + NULL, > + (VOID **)&CfgMgrProtocol > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find Configuration Manager protocol. Status = %r\n", > + Status > + )); > + return; > + } > + > + Status = GetCgfMgrInfo (CfgMgrProtocol, &CfgMfrInfo); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to get Configuration Manager info. Status = %r\n", > + Status > + )); > + return; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: Configuration Manager Version = 0x%x, OemID = %c%c%c%c%c%c\n", > + CfgMfrInfo->Revision, > + CfgMfrInfo->OemId[0], > + CfgMfrInfo->OemId[1], > + CfgMfrInfo->OemId[2], > + CfgMfrInfo->OemId[3], > + CfgMfrInfo->OemId[4], > + CfgMfrInfo->OemId[5] > + )); > + > + Status = ProcessAcpiTables (TableFactoryProtocol, CfgMgrProtocol); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: ACPI Table processing failure. Status = %r\n", > + Status > + )); > + } > +} > diff --git a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c > index 1e9b811c40..242c40be3b 100644 > --- a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c > +++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c > @@ -2,704 +2,39 @@ > Dynamic Table Manager Dxe > > Copyright (c) 2017 - 2019, ARM Limited. All rights reserved. > + Copyright (c) 2022 - 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved. > > SPDX-License-Identifier: BSD-2-Clause-Patent > > **/ > > #include > +#include > #include > #include > -#include > -#include > > // Module specific include files. > -#include > #include > #include > -#include > #include > #include > -#include > -#include > > -/// > -/// Bit definitions for acceptable ACPI table presence formats. > -/// Currently only ACPI tables present in the ACPI info list and > -/// already installed will count towards "Table Present" during > -/// verification routine. > -/// > -#define ACPI_TABLE_PRESENT_INFO_LIST BIT0 > -#define ACPI_TABLE_PRESENT_INSTALLED BIT1 > +STATIC VOID *AcpiTableProtocolRegistration; > +STATIC VOID *SmbiosProtocolRegistration; > > -/// > -/// Order of ACPI table being verified during presence inspection. > -/// > -#define ACPI_TABLE_VERIFY_FADT 0 > -#define ACPI_TABLE_VERIFY_MADT 1 > -#define ACPI_TABLE_VERIFY_GTDT 2 > -#define ACPI_TABLE_VERIFY_DSDT 3 > -#define ACPI_TABLE_VERIFY_DBG2 4 > -#define ACPI_TABLE_VERIFY_SPCR 5 > -#define ACPI_TABLE_VERIFY_COUNT 6 > +extern > +VOID > +SmbiosProtocolReady ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ); > > -/// > -/// Private data structure to verify the presence of mandatory > -/// or optional ACPI tables. > -/// > -typedef struct { > - /// ESTD ID for the ACPI table of interest. > - ESTD_ACPI_TABLE_ID EstdTableId; > - /// Standard UINT32 ACPI signature. > - UINT32 AcpiTableSignature; > - /// 4 character ACPI table name (the 5th char8 is for null terminator). > - CHAR8 AcpiTableName[sizeof (UINT32) + 1]; > - /// Indicator on whether the ACPI table is required. > - BOOLEAN IsMandatory; > - /// Formats of verified presences, as defined by ACPI_TABLE_PRESENT_* > - /// This field should be initialized to 0 and will be populated during > - /// verification routine. > - UINT16 Presence; > -} ACPI_TABLE_PRESENCE_INFO; > - > -/// > -/// We require the FADT, MADT, GTDT and the DSDT tables to boot. > -/// This list also include optional ACPI tables: DBG2, SPCR. > -/// > -ACPI_TABLE_PRESENCE_INFO mAcpiVerifyTables[ACPI_TABLE_VERIFY_COUNT] = { > - { EStdAcpiTableIdFadt, EFI_ACPI_6_2_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE, "FADT", TRUE, 0 }, > - { EStdAcpiTableIdMadt, EFI_ACPI_6_2_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE, "MADT", TRUE, 0 }, > - { EStdAcpiTableIdGtdt, EFI_ACPI_6_2_GENERIC_TIMER_DESCRIPTION_TABLE_SIGNATURE, "GTDT", TRUE, 0 }, > - { EStdAcpiTableIdDsdt, EFI_ACPI_6_2_DIFFERENTIATED_SYSTEM_DESCRIPTION_TABLE_SIGNATURE, "DSDT", TRUE, 0 }, > - { EStdAcpiTableIdDbg2, EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE, "DBG2", FALSE, 0 }, > - { EStdAcpiTableIdSpcr, EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE, "SPCR", FALSE, 0 }, > -}; > - > -/** This macro expands to a function that retrieves the ACPI Table > - List from the Configuration Manager. > -*/ > -GET_OBJECT_LIST ( > - EObjNameSpaceStandard, > - EStdObjAcpiTableList, > - CM_STD_OBJ_ACPI_TABLE_INFO > - ) > - > -/** A helper function to build and install a single ACPI table. > - > - This is a helper function that invokes the Table generator interface > - for building an ACPI table. It uses the AcpiTableProtocol to install the > - table, then frees the resources allocated for generating it. > - > - @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > - interface. > - @param [in] CfgMgrProtocol Pointer to the Configuration Manager > - Protocol Interface. > - @param [in] Generator Pointer to the AcpiTable generator. > - @param [in] AcpiTableProtocol Pointer to the AcpiTable protocol. > - @param [in] AcpiTableInfo Pointer to the ACPI table Info. > - > - @retval EFI_SUCCESS Success. > - @retval EFI_INVALID_PARAMETER A parameter is invalid. > - @retval EFI_NOT_FOUND Required object is not found. > - @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > - is less than the Object size for the > - requested object. > -**/ > -STATIC > -EFI_STATUS > -EFIAPI > -BuildAndInstallSingleAcpiTable ( > - IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > - IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > - IN CONST ACPI_TABLE_GENERATOR *CONST Generator, > - IN EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol, > - IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo > - ) > -{ > - EFI_STATUS Status; > - EFI_STATUS Status1; > - EFI_ACPI_DESCRIPTION_HEADER *AcpiTable; > - UINTN TableHandle; > - > - AcpiTable = NULL; > - Status = Generator->BuildAcpiTable ( > - Generator, > - AcpiTableInfo, > - CfgMgrProtocol, > - &AcpiTable > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to Build Table." \ > - " TableGeneratorId = 0x%x. Status = %r\n", > - AcpiTableInfo->TableGeneratorId, > - Status > - )); > - // Free any allocated resources. > - goto exit_handler; > - } > - > - if (AcpiTable == NULL) { > - Status = EFI_NOT_FOUND; > - goto exit_handler; > - } > - > - // Dump ACPI Table Header > - DUMP_ACPI_TABLE_HEADER (AcpiTable); > - > - // Install ACPI table > - Status = AcpiTableProtocol->InstallAcpiTable ( > - AcpiTableProtocol, > - AcpiTable, > - AcpiTable->Length, > - &TableHandle > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to Install ACPI Table. Status = %r\n", > - Status > - )); > - // Free any allocated resources. > - goto exit_handler; > - } > - > - DEBUG (( > - DEBUG_INFO, > - "INFO: ACPI Table installed. Status = %r\n", > - Status > - )); > - > -exit_handler: > - // Free any resources allocated for generating the tables. > - if (Generator->FreeTableResources != NULL) { > - Status1 = Generator->FreeTableResources ( > - Generator, > - AcpiTableInfo, > - CfgMgrProtocol, > - &AcpiTable > - ); > - if (EFI_ERROR (Status1)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to Free Table Resources." \ > - "TableGeneratorId = 0x%x. Status = %r\n", > - AcpiTableInfo->TableGeneratorId, > - Status1 > - )); > - } > - > - // Return the first error status in case of failure > - if (!EFI_ERROR (Status)) { > - Status = Status1; > - } > - } > - > - return Status; > -} > - > -/** A helper function to build and install multiple ACPI tables. > - > - This is a helper function that invokes the Table generator interface > - for building an ACPI table. It uses the AcpiTableProtocol to install the > - table, then frees the resources allocated for generating it. > - > - @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > - interface. > - @param [in] CfgMgrProtocol Pointer to the Configuration Manager > - Protocol Interface. > - @param [in] Generator Pointer to the AcpiTable generator. > - @param [in] AcpiTableProtocol Pointer to the AcpiTable protocol. > - @param [in] AcpiTableInfo Pointer to the ACPI table Info. > - > - @retval EFI_SUCCESS Success. > - @retval EFI_INVALID_PARAMETER A parameter is invalid. > - @retval EFI_NOT_FOUND Required object is not found. > - @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > - is less than the Object size for the > - requested object. > -**/ > -STATIC > -EFI_STATUS > -EFIAPI > -BuildAndInstallMultipleAcpiTable ( > - IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > - IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > - IN CONST ACPI_TABLE_GENERATOR *CONST Generator, > - IN EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol, > - IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo > - ) > -{ > - EFI_STATUS Status; > - EFI_STATUS Status1; > - EFI_ACPI_DESCRIPTION_HEADER **AcpiTable; > - UINTN TableCount; > - UINTN TableHandle; > - UINTN Index; > - > - AcpiTable = NULL; > - TableCount = 0; > - Status = Generator->BuildAcpiTableEx ( > - Generator, > - AcpiTableInfo, > - CfgMgrProtocol, > - &AcpiTable, > - &TableCount > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to Build Table." \ > - " TableGeneratorId = 0x%x. Status = %r\n", > - AcpiTableInfo->TableGeneratorId, > - Status > - )); > - // Free any allocated resources. > - goto exit_handler; > - } > - > - if ((AcpiTable == NULL) || (TableCount == 0)) { > - Status = EFI_NOT_FOUND; > - goto exit_handler; > - } > - > - for (Index = 0; Index < TableCount; Index++) { > - // Dump ACPI Table Header > - DUMP_ACPI_TABLE_HEADER (AcpiTable[Index]); > - // Install ACPI table > - Status = AcpiTableProtocol->InstallAcpiTable ( > - AcpiTableProtocol, > - AcpiTable[Index], > - AcpiTable[Index]->Length, > - &TableHandle > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to Install ACPI Table. Status = %r\n", > - Status > - )); > - // Free any allocated resources. > - goto exit_handler; > - } > - > - DEBUG (( > - DEBUG_INFO, > - "INFO: ACPI Table installed. Status = %r\n", > - Status > - )); > - } > - > -exit_handler: > - // Free any resources allocated for generating the tables. > - if (Generator->FreeTableResourcesEx != NULL) { > - Status1 = Generator->FreeTableResourcesEx ( > - Generator, > - AcpiTableInfo, > - CfgMgrProtocol, > - &AcpiTable, > - TableCount > - ); > - if (EFI_ERROR (Status1)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to Free Table Resources." \ > - "TableGeneratorId = 0x%x. Status = %r\n", > - AcpiTableInfo->TableGeneratorId, > - Status1 > - )); > - } > - > - // Return the first error status in case of failure > - if (!EFI_ERROR (Status)) { > - Status = Status1; > - } > - } > - > - return Status; > -} > - > -/** A helper function to invoke a Table generator > - > - This is a helper function that invokes the Table generator interface > - for building an ACPI table. It uses the AcpiTableProtocol to install the > - table, then frees the resources allocated for generating it. > - > - @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > - interface. > - @param [in] CfgMgrProtocol Pointer to the Configuration Manager > - Protocol Interface. > - @param [in] AcpiTableProtocol Pointer to the AcpiTable protocol. > - @param [in] AcpiTableInfo Pointer to the ACPI table Info. > - > - @retval EFI_SUCCESS Success. > - @retval EFI_INVALID_PARAMETER A parameter is invalid. > - @retval EFI_NOT_FOUND Required object is not found. > - @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > - is less than the Object size for the > - requested object. > -**/ > -STATIC > -EFI_STATUS > -EFIAPI > -BuildAndInstallAcpiTable ( > - IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > - IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > - IN EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol, > - IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo > - ) > -{ > - EFI_STATUS Status; > - CONST ACPI_TABLE_GENERATOR *Generator; > - > - ASSERT (TableFactoryProtocol != NULL); > - ASSERT (CfgMgrProtocol != NULL); > - ASSERT (AcpiTableProtocol != NULL); > - ASSERT (AcpiTableInfo != NULL); > - > - DEBUG (( > - DEBUG_INFO, > - "INFO: EStdObjAcpiTableList: Address = 0x%p," \ > - " TableGeneratorId = 0x%x\n", > - AcpiTableInfo, > - AcpiTableInfo->TableGeneratorId > - )); > - > - Generator = NULL; > - Status = TableFactoryProtocol->GetAcpiTableGenerator ( > - TableFactoryProtocol, > - AcpiTableInfo->TableGeneratorId, > - &Generator > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Table Generator not found." \ > - " TableGeneratorId = 0x%x. Status = %r\n", > - AcpiTableInfo->TableGeneratorId, > - Status > - )); > - return Status; > - } > - > - if (Generator == NULL) { > - return EFI_NOT_FOUND; > - } > - > - DEBUG (( > - DEBUG_INFO, > - "INFO: Generator found : %s\n", > - Generator->Description > - )); > - > - if (Generator->BuildAcpiTableEx != NULL) { > - Status = BuildAndInstallMultipleAcpiTable ( > - TableFactoryProtocol, > - CfgMgrProtocol, > - Generator, > - AcpiTableProtocol, > - AcpiTableInfo > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to find build and install ACPI Table." \ > - " Status = %r\n", > - Status > - )); > - } > - } else if (Generator->BuildAcpiTable != NULL) { > - Status = BuildAndInstallSingleAcpiTable ( > - TableFactoryProtocol, > - CfgMgrProtocol, > - Generator, > - AcpiTableProtocol, > - AcpiTableInfo > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to find build and install ACPI Table." \ > - " Status = %r\n", > - Status > - )); > - } > - } else { > - Status = EFI_INVALID_PARAMETER; > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Table Generator does not implement the" \ > - " ACPI_TABLE_GENERATOR_BUILD_TABLE interface." \ > - " TableGeneratorId = 0x%x. Status = %r\n", > - AcpiTableInfo->TableGeneratorId, > - Status > - )); > - } > - > - return Status; > -} > - > -/** The function checks if the Configuration Manager has provided the > - mandatory ACPI tables for installation. > - > - @param [in] AcpiTableInfo Pointer to the ACPI Table Info list. > - @param [in] AcpiTableCount Count of ACPI Table Info. > - > - @retval EFI_SUCCESS Success. > - @retval EFI_NOT_FOUND If mandatory table is not found. > - @retval EFI_ALREADY_STARTED If mandatory table found in AcpiTableInfo is already installed. > -**/ > -STATIC > -EFI_STATUS > -EFIAPI > -VerifyMandatoryTablesArePresent ( > - IN CONST CM_STD_OBJ_ACPI_TABLE_INFO *CONST AcpiTableInfo, > - IN UINT32 AcpiTableCount > - ) > -{ > - EFI_STATUS Status; > - UINTN Handle; > - UINTN Index; > - UINTN InstalledTableIndex; > - EFI_ACPI_DESCRIPTION_HEADER *DescHeader; > - EFI_ACPI_TABLE_VERSION Version; > - EFI_ACPI_SDT_PROTOCOL *AcpiSdt; > - > - ASSERT (AcpiTableInfo != NULL); > - > - Status = EFI_SUCCESS; > - > - // Check against the statically initialized ACPI tables to see if they are in ACPI info list > - while (AcpiTableCount-- != 0) { > - for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) { > - if (AcpiTableInfo[AcpiTableCount].AcpiTableSignature == mAcpiVerifyTables[Index].AcpiTableSignature) { > - mAcpiVerifyTables[Index].Presence |= ACPI_TABLE_PRESENT_INFO_LIST; > - // Found this table, skip the rest. > - break; > - } > - } > - } > - > - // They also might be published already, so we can search from there > - if (FeaturePcdGet (PcdInstallAcpiSdtProtocol)) { > - AcpiSdt = NULL; > - Status = gBS->LocateProtocol (&gEfiAcpiSdtProtocolGuid, NULL, (VOID **)&AcpiSdt); > - > - if (EFI_ERROR (Status) || (AcpiSdt == NULL)) { > - DEBUG ((DEBUG_ERROR, "ERROR: Failed to locate ACPI SDT protocol (0x%p) - %r\n", AcpiSdt, Status)); > - return Status; > - } > - > - for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) { > - Handle = 0; > - InstalledTableIndex = 0; > - do { > - Status = AcpiSdt->GetAcpiTable (InstalledTableIndex, (EFI_ACPI_SDT_HEADER **)&DescHeader, &Version, &Handle); > - if (EFI_ERROR (Status)) { > - break; > - } > - > - InstalledTableIndex++; > - } while (DescHeader->Signature != mAcpiVerifyTables[Index].AcpiTableSignature); > - > - if (!EFI_ERROR (Status)) { > - mAcpiVerifyTables[Index].Presence |= ACPI_TABLE_PRESENT_INSTALLED; > - } > - } > - } > - > - // Reset the return Status value to EFI_SUCCESS. We do not fully care if the table look up has failed. > - Status = EFI_SUCCESS; > - for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) { > - if (mAcpiVerifyTables[Index].Presence == 0) { > - if (mAcpiVerifyTables[Index].IsMandatory) { > - DEBUG ((DEBUG_ERROR, "ERROR: %a Table not found.\n", mAcpiVerifyTables[Index].AcpiTableName)); > - Status = EFI_NOT_FOUND; > - } else { > - DEBUG ((DEBUG_WARN, "WARNING: %a Table not found.\n", mAcpiVerifyTables[Index].AcpiTableName)); > - } > - } else if (mAcpiVerifyTables[Index].Presence == > - (ACPI_TABLE_PRESENT_INFO_LIST | ACPI_TABLE_PRESENT_INSTALLED)) > - { > - DEBUG ((DEBUG_ERROR, "ERROR: %a Table found while already published.\n", mAcpiVerifyTables[Index].AcpiTableName)); > - Status = EFI_ALREADY_STARTED; > - } > - } > - > - return Status; > -} > - > -/** Generate and install ACPI tables. > - > - The function gathers the information necessary for installing the > - ACPI tables from the Configuration Manager, invokes the generators > - and installs them (via BuildAndInstallAcpiTable). > - > - @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > - interface. > - @param [in] CfgMgrProtocol Pointer to the Configuration Manager > - Protocol Interface. > - > - @retval EFI_SUCCESS Success. > - @retval EFI_NOT_FOUND If a mandatory table or a generator is not found. > - @retval EFI_ALREADY_STARTED If mandatory table found in AcpiTableInfo is already installed. > -**/ > -STATIC > -EFI_STATUS > -EFIAPI > -ProcessAcpiTables ( > - IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > - IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol > - ) > -{ > - EFI_STATUS Status; > - EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol; > - CM_STD_OBJ_ACPI_TABLE_INFO *AcpiTableInfo; > - UINT32 AcpiTableCount; > - UINT32 Idx; > - > - ASSERT (TableFactoryProtocol != NULL); > - ASSERT (CfgMgrProtocol != NULL); > - > - // Find the AcpiTable protocol > - Status = gBS->LocateProtocol ( > - &gEfiAcpiTableProtocolGuid, > - NULL, > - (VOID **)&AcpiTableProtocol > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to find AcpiTable protocol. Status = %r\n", > - Status > - )); > - return Status; > - } > - > - Status = GetEStdObjAcpiTableList ( > - CfgMgrProtocol, > - CM_NULL_TOKEN, > - &AcpiTableInfo, > - &AcpiTableCount > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to get ACPI Table List. Status = %r\n", > - Status > - )); > - return Status; > - } > - > - if (0 == AcpiTableCount) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: EStdObjAcpiTableList: AcpiTableCount = %d\n", > - AcpiTableCount > - )); > - return EFI_NOT_FOUND; > - } > - > - DEBUG (( > - DEBUG_INFO, > - "INFO: EStdObjAcpiTableList: AcpiTableCount = %d\n", > - AcpiTableCount > - )); > - > - // Check if mandatory ACPI tables are present. > - Status = VerifyMandatoryTablesArePresent ( > - AcpiTableInfo, > - AcpiTableCount > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to verify mandatory ACPI Table(s) presence." > - " Status = %r\n", > - Status > - )); > - return Status; > - } > - > - // Add the FADT Table first. > - if ((mAcpiVerifyTables[ACPI_TABLE_VERIFY_FADT].Presence & ACPI_TABLE_PRESENT_INSTALLED) == 0) { > - // FADT is not yet installed > - for (Idx = 0; Idx < AcpiTableCount; Idx++) { > - if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) == > - AcpiTableInfo[Idx].TableGeneratorId) > - { > - Status = BuildAndInstallAcpiTable ( > - TableFactoryProtocol, > - CfgMgrProtocol, > - AcpiTableProtocol, > - &AcpiTableInfo[Idx] > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to find build and install ACPI FADT Table." \ > - " Status = %r\n", > - Status > - )); > - return Status; > - } > - > - break; > - } > - } // for > - } > - > - // Add remaining ACPI Tables > - for (Idx = 0; Idx < AcpiTableCount; Idx++) { > - DEBUG (( > - DEBUG_INFO, > - "INFO: AcpiTableInfo[%d].TableGeneratorId = 0x%x\n", > - Idx, > - AcpiTableInfo[Idx].TableGeneratorId > - )); > - > - // Skip FADT Table since we have already added > - if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) == > - AcpiTableInfo[Idx].TableGeneratorId) > - { > - continue; > - } > - > - // Skip the Reserved table Generator ID for standard generators > - if ((IS_GENERATOR_NAMESPACE_STD (AcpiTableInfo[Idx].TableGeneratorId)) && > - ((CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdReserved) >= > - AcpiTableInfo[Idx].TableGeneratorId) || > - (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdMax) <= > - AcpiTableInfo[Idx].TableGeneratorId))) > - { > - DEBUG (( > - DEBUG_WARN, > - "WARNING: Invalid ACPI Generator table ID = 0x%x, Skipping...\n", > - AcpiTableInfo[Idx].TableGeneratorId > - )); > - continue; > - } > - > - Status = BuildAndInstallAcpiTable ( > - TableFactoryProtocol, > - CfgMgrProtocol, > - AcpiTableProtocol, > - &AcpiTableInfo[Idx] > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to find, build, and install ACPI Table." \ > - " Status = %r\n", > - Status > - )); > - return Status; > - } > - } // for > - > - return Status; > -} > +extern > +VOID > +AcpiTableProtocolReady ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ); [SAMI] I see you have introduced the Protocol Ready event . Can you please explain why this was done/needed? Also, it would be good to split these changes as a separate patch. > > /** Entrypoint of Dynamic Table Manager Dxe. > > @@ -727,72 +62,33 @@ DynamicTableManagerDxeInitialize ( > IN EFI_SYSTEM_TABLE *SystemTable > ) > { > - EFI_STATUS Status; > - EDKII_CONFIGURATION_MANAGER_PROTOCOL *CfgMgrProtocol; > - CM_STD_OBJ_CONFIGURATION_MANAGER_INFO *CfgMfrInfo; > - EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *TableFactoryProtocol; > - > - // Locate the Dynamic Table Factory > - Status = gBS->LocateProtocol ( > - &gEdkiiDynamicTableFactoryProtocolGuid, > - NULL, > - (VOID **)&TableFactoryProtocol > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to find Dynamic Table Factory protocol." \ > - " Status = %r\n", > - Status > - )); > - return Status; > - } > - > - // Locate the Configuration Manager for the Platform > - Status = gBS->LocateProtocol ( > - &gEdkiiConfigurationManagerProtocolGuid, > - NULL, > - (VOID **)&CfgMgrProtocol > - ); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to find Configuration Manager protocol. Status = %r\n", > - Status > - )); > - return Status; > - } > - > - Status = GetCgfMgrInfo (CfgMgrProtocol, &CfgMfrInfo); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: Failed to get Configuration Manager info. Status = %r\n", > - Status > - )); > - return Status; > - } > - > - DEBUG (( > - DEBUG_INFO, > - "INFO: Configuration Manager Version = 0x%x, OemID = %c%c%c%c%c%c\n", > - CfgMfrInfo->Revision, > - CfgMfrInfo->OemId[0], > - CfgMfrInfo->OemId[1], > - CfgMfrInfo->OemId[2], > - CfgMfrInfo->OemId[3], > - CfgMfrInfo->OemId[4], > - CfgMfrInfo->OemId[5] > - )); > - > - Status = ProcessAcpiTables (TableFactoryProtocol, CfgMgrProtocol); > - if (EFI_ERROR (Status)) { > - DEBUG (( > - DEBUG_ERROR, > - "ERROR: ACPI Table processing failure. Status = %r\n", > - Status > - )); > - } > - > - return Status; > + EFI_EVENT AcpiEvent; > + EFI_EVENT SmbiosEvent; > + > + AcpiEvent = EfiCreateProtocolNotifyEvent ( > + &gEfiAcpiTableProtocolGuid, > + TPL_CALLBACK, > + AcpiTableProtocolReady, > + NULL, > + &AcpiTableProtocolRegistration > + ); > + if (AcpiEvent == NULL) { > + DEBUG ((DEBUG_ERROR, "%a: Failed to ACPI create protocol event\r\n", __FUNCTION__)); > + return EFI_OUT_OF_RESOURCES; > + } > + > + SmbiosEvent = EfiCreateProtocolNotifyEvent ( > + &gEfiSmbiosProtocolGuid, > + TPL_CALLBACK, > + SmbiosProtocolReady, > + NULL, > + &SmbiosProtocolRegistration > + ); > + if (SmbiosEvent == NULL) { > + DEBUG ((DEBUG_ERROR, "%a: Failed to SMBIOS create protocol event\r\n", __FUNCTION__)); > + gBS->CloseEvent (AcpiEvent); > + return EFI_OUT_OF_RESOURCES; > + } > + > + return EFI_SUCCESS; > } > diff --git a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf > index b09272d883..9d020f0264 100644 > --- a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf > +++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf > @@ -22,6 +22,8 @@ > > [Sources] > DynamicTableManagerDxe.c > + SmbiosTableBuilder.c > + AcpiTableBuilder.c > SmbiosTableDispatcher.c > SmbiosTableDispatcher.h > > @@ -33,6 +35,7 @@ > [LibraryClasses] > PrintLib > TableHelperLib > + UefiLib > UefiBootServicesTableLib > UefiDriverEntryPoint > > @@ -42,12 +45,12 @@ > [Protocols] > gEfiAcpiTableProtocolGuid # PROTOCOL ALWAYS_CONSUMED > gEfiAcpiSdtProtocolGuid # PROTOCOL ALWAYS_CONSUMED > + gEfiSmbiosProtocolGuid # PROTOCOL ALWAYS_CONSUMED > > gEdkiiConfigurationManagerProtocolGuid # PROTOCOL ALWAYS_CONSUMED > gEdkiiDynamicTableFactoryProtocolGuid # PROTOCOL ALWAYS_CONSUMED > > [Depex] > - gEfiAcpiTableProtocolGuid AND > gEdkiiConfigurationManagerProtocolGuid AND > gEdkiiDynamicTableFactoryProtocolGuid > > diff --git a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/SmbiosTableBuilder.c b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/SmbiosTableBuilder.c > new file mode 100644 > index 0000000000..9ca690c16b > --- /dev/null > +++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/SmbiosTableBuilder.c > @@ -0,0 +1,608 @@ > +/** @file > + SMBIOS Table Builder > + > + Copyright (c) 2017 - 2019, ARM Limited. All rights reserved. > + Copyright (c) 2022 - 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved. > + > + SPDX-License-Identifier: BSD-2-Clause-Patent > + > +**/ > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +// Module specific include files. > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/** This macro expands to a function that retrieves the SMBIOS Table > + List from the Configuration Manager. > +*/ > +GET_OBJECT_LIST ( > + EObjNameSpaceStandard, > + EStdObjSmbiosTableList, > + CM_STD_OBJ_SMBIOS_TABLE_INFO > + ) > + > +/** A helper function to build and install an SMBIOS table. > + > + This is a helper function that invokes the Table generator interface > + for building an SMBIOS table. It uses the SmbiosProtocol to install the > + table, then frees the resources allocated for generating it. > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + @param [in] SmbiosProtocol Pointer to the SMBIOS protocol. > + @param [in] SmbiosTableInfo Pointer to the SMBIOS table Info. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_INVALID_PARAMETER A parameter is invalid. > + @retval EFI_NOT_FOUND Required object is not found. > + @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > + is less than the Object size for the > + requested object. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +BuildAndInstallSingleSmbiosTable ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + IN CONST SMBIOS_TABLE_GENERATOR *CONST Generator, > + IN EFI_SMBIOS_PROTOCOL *SmbiosProtocol, > + IN CM_STD_OBJ_SMBIOS_TABLE_INFO *CONST SmbiosTableInfo > + ) > +{ > + EFI_STATUS Status; > + EFI_STATUS Status1; > + SMBIOS_STRUCTURE *SmbiosTable; > + CM_OBJECT_TOKEN CmObjToken; > + EFI_SMBIOS_HANDLE TableHandle; > + SMBIOS_HANDLE_MAP *HandleMap; > + > + SmbiosTable = NULL; > + Status = Generator->BuildSmbiosTable ( > + Generator, > + TableFactoryProtocol, > + SmbiosTableInfo, > + CfgMgrProtocol, > + &SmbiosTable, > + &CmObjToken > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Build Table." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + SmbiosTableInfo->TableGeneratorId, > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + if (SmbiosTable == NULL) { > + Status = EFI_NOT_FOUND; > + goto exit_handler; > + } > + > + HandleMap = TableFactoryProtocol->GetSmbiosHandle (CmObjToken); [SAMI] A HandleMap would be returned if the SMBIOS table is already installed right? Does this code require changing? > + if (HandleMap == NULL) { > + TableHandle = SMBIOS_HANDLE_PI_RESERVED; > + } else { > + TableHandle = HandleMap->SmbiosTblHandle; > + } > + > + // Install SMBIOS table > + Status = SmbiosProtocol->Add ( > + SmbiosProtocol, > + NULL, > + &TableHandle, > + SmbiosTable > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Install SMBIOS Table. Status = %r\n", > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + // If a new handle was generated then add it to the handle map. > + if (HandleMap == NULL) { [SAMI] Unless I am missing something, we would add the SMBIOS handle returned in SmbiosProtocol->Add() to the Handle Mapping table here. So the case of a handle being generate would not be applicable right? > + TableFactoryProtocol->AddSmbiosHandle ( > + SmbiosProtocol, > + &TableHandle, > + CmObjToken, > + SmbiosTableInfo->TableGeneratorId > + ); > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: SMBIOS Table installed. Status = %r\n", > + Status > + )); > + > +exit_handler: > + // Free any resources allocated for generating the tables. > + if (Generator->FreeTableResources != NULL) { > + Status1 = Generator->FreeTableResources ( > + Generator, > + TableFactoryProtocol, > + SmbiosTableInfo, > + CfgMgrProtocol, > + &SmbiosTable > + ); > + if (EFI_ERROR (Status1)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Free Table Resources." \ > + "TableGeneratorId = 0x%x. Status = %r\n", > + SmbiosTableInfo->TableGeneratorId, > + Status1 > + )); > + } > + > + // Return the first error status in case of failure > + if (!EFI_ERROR (Status)) { > + Status = Status1; > + } > + } > + > + return Status; > +} > + > +/** A helper function to build and install multiple SMBIOS tables. > + > + This is a helper function that invokes the Table generator interface > + for building SMBIOS tables. It uses the SmbiosProtocol to install the > + tables, then frees the resources allocated for generating it. > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + @param [in] Generator Pointer to the SmbiosTable generator. > + @param [in] SmbiosProtocol Pointer to the Smbios protocol. > + @param [in] AcpiTableInfo Pointer to the SMBIOS table Info. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_INVALID_PARAMETER A parameter is invalid. > + @retval EFI_NOT_FOUND Required object is not found. > + @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > + is less than the Object size for the > + requested object. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +BuildAndInstallMultipleSmbiosTables ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + IN CONST SMBIOS_TABLE_GENERATOR *CONST Generator, > + IN EFI_SMBIOS_PROTOCOL *SmbiosProtocol, > + IN CM_STD_OBJ_SMBIOS_TABLE_INFO *CONST SmbiosTableInfo > + ) > +{ > + EFI_STATUS Status; > + EFI_STATUS Status1; > + SMBIOS_STRUCTURE **SmbiosTable; > + CM_OBJECT_TOKEN *CmObjToken; > + EFI_SMBIOS_HANDLE TableHandle; > + UINTN TableCount; > + UINTN Index; > + SMBIOS_HANDLE_MAP *HandleMap; > + > + TableCount = 0; > + Status = Generator->BuildSmbiosTableEx ( > + Generator, > + TableFactoryProtocol, > + SmbiosTableInfo, > + CfgMgrProtocol, > + &SmbiosTable, > + &CmObjToken, > + &TableCount > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Build Table." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + SmbiosTableInfo->TableGeneratorId, > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + if ((SmbiosTable == NULL) || (TableCount == 0)) { > + Status = EFI_NOT_FOUND; > + DEBUG (( > + DEBUG_ERROR, > + "%a: TableCount %u SmbiosTable %p \n", > + __FUNCTION__, > + TableCount, > + SmbiosTable > + )); > + goto exit_handler; > + } > + > + for (Index = 0; Index < TableCount; Index++) { > + HandleMap = TableFactoryProtocol->GetSmbiosHandle (CmObjToken[Index]); [SAMI] Same comment as in the function above. > + if (HandleMap == NULL) { > + TableHandle = SMBIOS_HANDLE_PI_RESERVED; > + } else { > + TableHandle = HandleMap->SmbiosTblHandle; > + } > + > + // Install SMBIOS table > + Status = SmbiosProtocol->Add ( > + SmbiosProtocol, > + NULL, > + &TableHandle, > + SmbiosTable[Index] > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Install SMBIOS Table. Status = %r\n", > + Status > + )); > + // Free any allocated resources. > + goto exit_handler; > + } > + > + // If a new handle was generated then add it to the handle map. > + if (HandleMap == NULL) { > + TableFactoryProtocol->AddSmbiosHandle ( > + SmbiosProtocol, > + &TableHandle, > + CmObjToken[Index], > + SmbiosTableInfo->TableGeneratorId > + ); > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: SMBIOS Table installed. Status = %r\n", > + Status > + )); > + } > + > +exit_handler: > + // Free any resources allocated for generating the tables. > + if (Generator->FreeTableResourcesEx != NULL) { > + Status1 = Generator->FreeTableResourcesEx ( > + Generator, > + TableFactoryProtocol, > + SmbiosTableInfo, > + CfgMgrProtocol, > + &SmbiosTable, > + &CmObjToken, > + TableCount > + ); > + if (EFI_ERROR (Status1)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to Free Table Resources." \ > + "TableGeneratorId = 0x%x. Status = %r\n", > + SmbiosTableInfo->TableGeneratorId, > + Status1 > + )); > + } > + > + // Return the first error status in case of failure > + if (!EFI_ERROR (Status)) { > + Status = Status1; > + } > + } > + > + DEBUG ((DEBUG_ERROR, "%a: Returning %r\n", __FUNCTION__, Status)); > + return Status; > +} > + > +/** A helper function to invoke a Table generator > + > + This is a helper function that invokes the Table generator interface > + for building an SMBIOS table. It uses the SmbiosProtocol to install the > + table, then frees the resources allocated for generating it. > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + @param [in] SmbiosProtocol Pointer to the SMBIOS protocol. > + @param [in] SmbiosTableInfo Pointer to the SMBIOS table Info. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_INVALID_PARAMETER A parameter is invalid. > + @retval EFI_NOT_FOUND Required object is not found. > + @retval EFI_BAD_BUFFER_SIZE Size returned by the Configuration Manager > + is less than the Object size for the > + requested object. > +**/ > +EFI_STATUS > +EFIAPI > +BuildAndInstallSmbiosTable ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + IN EFI_SMBIOS_PROTOCOL *SmbiosProtocol, > + IN CM_STD_OBJ_SMBIOS_TABLE_INFO *CONST SmbiosTableInfo > + ) > +{ > + EFI_STATUS Status; > + CONST SMBIOS_TABLE_GENERATOR *Generator; > + > + ASSERT (TableFactoryProtocol != NULL); > + ASSERT (CfgMgrProtocol != NULL); > + ASSERT (SmbiosProtocol != NULL); > + ASSERT (SmbiosTableInfo != NULL); > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: EStdObjSmbiosTableList: Address = 0x%p," \ > + " TableGeneratorId = 0x%x\n", > + SmbiosTableInfo, > + SmbiosTableInfo->TableGeneratorId > + )); > + > + Generator = NULL; > + Status = TableFactoryProtocol->GetSmbiosTableGenerator ( > + TableFactoryProtocol, > + SmbiosTableInfo->TableGeneratorId, > + &Generator > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Table Generator not found." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + SmbiosTableInfo->TableGeneratorId, > + Status > + )); > + return Status; > + } > + > + if (Generator == NULL) { > + return EFI_NOT_FOUND; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: Generator found : %s\n", > + Generator->Description > + )); > + > + if (Generator->BuildSmbiosTableEx != NULL) { > + Status = BuildAndInstallMultipleSmbiosTables ( > + TableFactoryProtocol, > + CfgMgrProtocol, > + Generator, > + SmbiosProtocol, > + SmbiosTableInfo > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find build and install SMBIOS Tables." \ > + " Status = %r\n", > + Status > + )); > + } > + } else if (Generator->BuildSmbiosTable != NULL) { > + Status = BuildAndInstallSingleSmbiosTable ( > + TableFactoryProtocol, > + CfgMgrProtocol, > + Generator, > + SmbiosProtocol, > + SmbiosTableInfo > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find build and install SMBIOS Table." \ > + " Status = %r\n", > + Status > + )); > + } > + } else { > + Status = EFI_INVALID_PARAMETER; > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Table Generator does not implement the" \ > + "SMBIOS_TABLE_GENERATOR_BUILD_TABLE interface." \ > + " TableGeneratorId = 0x%x. Status = %r\n", > + SmbiosTableInfo->TableGeneratorId, > + Status > + )); > + } > + > + DEBUG ((DEBUG_ERROR, "%a: Returning %r\n", __FUNCTION__, Status)); > + return Status; > +} > + > +/** Generate and install SMBIOS tables. > + > + The function gathers the information necessary for installing the > + SMBIOS tables from the Configuration Manager, invokes the generators > + and installs them (via BuildAndInstallAcpiTable). > + > + @param [in] TableFactoryProtocol Pointer to the Table Factory Protocol > + interface. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol Interface. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_NOT_FOUND If a mandatory table or a generator is not found. > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +ProcessSmbiosTables ( > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol > + ) > +{ > + EFI_STATUS Status; > + EFI_SMBIOS_PROTOCOL *SmbiosProtocol; > + CM_STD_OBJ_SMBIOS_TABLE_INFO *SmbiosTableInfo; > + UINT32 SmbiosTableCount; > + UINT32 Idx; > + > + Status = gBS->LocateProtocol (&gEfiSmbiosProtocolGuid, NULL, (VOID **)&SmbiosProtocol); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "Could not locate SMBIOS protocol. %r\n", Status)); > + return Status; > + } > + > + Status = GetEStdObjSmbiosTableList ( > + CfgMgrProtocol, > + CM_NULL_TOKEN, > + &SmbiosTableInfo, > + &SmbiosTableCount > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to get SMBIOS Table List. Status = %r\n", > + Status > + )); > + return Status; > + } > + > + if (SmbiosTableCount == 0) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: EStdObjSmbiosTableList: SmbiosTableCount = %d\n", > + SmbiosTableCount > + )); > + return EFI_NOT_FOUND; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: EStdObjSmbiosTableList: SmbiosTableCount = %d\n", > + SmbiosTableCount > + )); > + > + for (Idx = 0; Idx < SmbiosTableCount; Idx++) { > + Status = DispatchSmbiosTable ( > + SmbiosTableInfo[Idx].TableType, > + TableFactoryProtocol, > + CfgMgrProtocol, > + SmbiosProtocol, > + SmbiosTableInfo, > + SmbiosTableCount > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to install SMBIOS Table." \ > + " Id = %u Status = %r\n", > + SmbiosTableInfo[Idx].TableGeneratorId, > + Status > + )); > + } > + } > + [SAMI] I think the above code may need some adjustment based on the v2 series of the SMBIOS dispatcher at https://edk2.groups.io/g/devel/message/100833 In the v2 series theDispatchSmbiosTables() internally iterates through the list of SMBIOS tables and dispatches them. So looks like you may not need the for loop. Can you check, please? [/SAMI] > + DEBUG ((DEBUG_ERROR, "%a: Returning %r\n", __FUNCTION__, Status)); > + return Status; > +} > + > +/** Callback Function for Smbios table generation. > + > + Callback function when SMBIOS protocol is installed, this function will then > + invoke the code to install the available SMBIOS tables. > + > + @param Event > + @param Context > + > + @retval None. > +**/ > +VOID > +SmbiosProtocolReady ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + EFI_STATUS Status; > + EDKII_CONFIGURATION_MANAGER_PROTOCOL *CfgMgrProtocol; > + CM_STD_OBJ_CONFIGURATION_MANAGER_INFO *CfgMfrInfo; > + EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *TableFactoryProtocol; > + > + // Locate the Dynamic Table Factory > + Status = gBS->LocateProtocol ( > + &gEdkiiDynamicTableFactoryProtocolGuid, > + NULL, > + (VOID **)&TableFactoryProtocol > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find Dynamic Table Factory protocol." \ > + " Status = %r\n", > + Status > + )); > + return; > + } > + > + // Locate the Configuration Manager for the Platform > + Status = gBS->LocateProtocol ( > + &gEdkiiConfigurationManagerProtocolGuid, > + NULL, > + (VOID **)&CfgMgrProtocol > + ); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to find Configuration Manager protocol. Status = %r\n", > + Status > + )); > + return; > + } > + > + Status = GetCgfMgrInfo (CfgMgrProtocol, &CfgMfrInfo); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: Failed to get Configuration Manager info. Status = %r\n", > + Status > + )); > + return; > + } > + > + DEBUG (( > + DEBUG_INFO, > + "INFO: Configuration Manager Version = 0x%x, OemID = %c%c%c%c%c%c\n", > + CfgMfrInfo->Revision, > + CfgMfrInfo->OemId[0], > + CfgMfrInfo->OemId[1], > + CfgMfrInfo->OemId[2], > + CfgMfrInfo->OemId[3], > + CfgMfrInfo->OemId[4], > + CfgMfrInfo->OemId[5] > + )); > + > + Status = ProcessSmbiosTables (TableFactoryProtocol, CfgMgrProtocol); > + if (EFI_ERROR (Status)) { > + DEBUG (( > + DEBUG_ERROR, > + "ERROR: SMBIOS Table processing failure. Status = %r\n", > + Status > + )); > + } > +} > diff --git a/DynamicTablesPkg/Include/ConfigurationManagerObject.h b/DynamicTablesPkg/Include/ConfigurationManagerObject.h > index 74ad25d5d9..0c97e70996 100644 > --- a/DynamicTablesPkg/Include/ConfigurationManagerObject.h > +++ b/DynamicTablesPkg/Include/ConfigurationManagerObject.h > @@ -31,6 +31,7 @@ Bits: [31:28] - Name Space ID > 0000 - Standard > 0001 - ARM > 1000 - Custom/OEM > + 1010 - SMBIOS > All other values are reserved. > > Bits: [27:16] - Reserved. > @@ -105,9 +106,10 @@ typedef UINT32 CM_OBJECT_ID; > for the Configuration Manager Objects. > */ > typedef enum ObjectNameSpaceID { > - EObjNameSpaceStandard, ///< Standard Objects Namespace > - EObjNameSpaceArm, ///< ARM Objects Namespace > - EObjNameSpaceOem = 0x8, ///< OEM Objects Namespace > + EObjNameSpaceStandard, ///< Standard Objects Namespace > + EObjNameSpaceArm, ///< ARM Objects Namespace > + EObjNameSpaceOem = 0x8, ///< OEM Objects Namespace > + EObjNameSpaceSmbios = 0xA, ///< SMBIOS Objects Namespace > EObjNameSpaceMax > } EOBJECT_NAMESPACE_ID; > > @@ -192,4 +194,14 @@ typedef struct CmObjDescriptor { > #define CREATE_CM_OEM_OBJECT_ID(ObjectId) \ > (CREATE_CM_OBJECT_ID (EObjNameSpaceOem, ObjectId)) > > +/** This macro returns a Configuration Manager Object ID > + in the SMBIOS Object Namespace. > + > + @param [in] ObjectId The Object ID. > + > + @retval Returns an SMBIOS Configuration Manager Object ID. > +**/ > +#define CREATE_CM_SMBIOS_OBJECT_ID(ObjectId) \ > + (CREATE_CM_OBJECT_ID (EObjNameSpaceSmbios, ObjectId)) > + > #endif // CONFIGURATION_MANAGER_OBJECT_H_ > diff --git a/DynamicTablesPkg/Include/Protocol/DynamicTableFactoryProtocol.h b/DynamicTablesPkg/Include/Protocol/DynamicTableFactoryProtocol.h > index b11fc0c9f1..0670a8fb27 100644 > --- a/DynamicTablesPkg/Include/Protocol/DynamicTableFactoryProtocol.h > +++ b/DynamicTablesPkg/Include/Protocol/DynamicTableFactoryProtocol.h > @@ -239,12 +239,20 @@ typedef struct DynamicTableFactoryProtocol { > EDKII_DYNAMIC_TABLE_FACTORY_DEREGISTER_DT_TABLE_GENERATOR > DeregisterDtTableGenerator; > > + EDKII_DYNAMIC_TABLE_FACTORY_SMBIOS_TABLE_ADD_HANDLE > + AddSmbiosHandle; > + > + EDKII_DYNAMIC_TABLE_FACTORY_SMBIOS_TABLE_GET_HANDLE > + GetSmbiosHandle; > + > /** Pointer to the data structure that holds the > list of registered table generators > */ > EDKII_DYNAMIC_TABLE_FACTORY_INFO *TableFactoryInfo; > } EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL; > > + > + > /** The Dynamic Table Factory Protocol GUID. > */ > extern EFI_GUID gEdkiiDynamicTableFactoryProtocolGuid; > diff --git a/DynamicTablesPkg/Include/SmbiosTableGenerator.h b/DynamicTablesPkg/Include/SmbiosTableGenerator.h > index 934d56c90d..d81eb8f124 100644 > --- a/DynamicTablesPkg/Include/SmbiosTableGenerator.h > +++ b/DynamicTablesPkg/Include/SmbiosTableGenerator.h > @@ -10,7 +10,7 @@ > #define SMBIOS_TABLE_GENERATOR_H_ > > #include > - > +#include > #include > > #pragma pack(1) > @@ -121,12 +121,21 @@ typedef enum StdSmbiosTableGeneratorId { > ETableGeneratorNameSpaceStd, \ > TableId \ > ) > +#define MAX_SMBIOS_HANDLES (255) [SAMI] Maybe we could define a FixedPcd instead of hardcoding to 255. > > /** Forward declarations. > */ > typedef struct ConfigurationManagerProtocol EDKII_CONFIGURATION_MANAGER_PROTOCOL; > typedef struct CmStdObjSmbiosTableInfo CM_STD_OBJ_SMBIOS_TABLE_INFO; > typedef struct SmbiosTableGenerator SMBIOS_TABLE_GENERATOR; > +typedef struct DynamicTableFactoryProtocol EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL; > +typedef UINTN CM_OBJECT_TOKEN; > + > +typedef struct SmbiosHandleCmObjMap { > + ESTD_SMBIOS_TABLE_ID SmbiosTableId; > + SMBIOS_HANDLE SmbiosTblHandle; > + CM_OBJECT_TOKEN SmbiosCmToken; > +} SMBIOS_HANDLE_MAP; > > /** This function pointer describes the interface to SMBIOS table build > functions provided by the SMBIOS table generator and called by the > @@ -143,9 +152,11 @@ typedef struct SmbiosTableGenerator SMBIOS_TABLE_GENERATOR; > **/ > typedef EFI_STATUS (*SMBIOS_TABLE_GENERATOR_BUILD_TABLE) ( > IN CONST SMBIOS_TABLE_GENERATOR *Generator, > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > IN CM_STD_OBJ_SMBIOS_TABLE_INFO *CONST SmbiosTableInfo, > IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > - OUT SMBIOS_STRUCTURE **Table > + OUT SMBIOS_STRUCTURE **Table, > + OUT CM_OBJECT_TOKEN *CmObjToken > ); > > /** This function pointer describes the interface to used by the > @@ -163,11 +174,105 @@ typedef EFI_STATUS (*SMBIOS_TABLE_GENERATOR_BUILD_TABLE) ( > **/ > typedef EFI_STATUS (*SMBIOS_TABLE_GENERATOR_FREE_TABLE) ( > IN CONST SMBIOS_TABLE_GENERATOR *Generator, > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > IN CONST CM_STD_OBJ_SMBIOS_TABLE_INFO *CONST SmbiosTableInfo, > IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > IN SMBIOS_STRUCTURE **Table > ); > > +/** This function pointer describes the interface to SMBIOS table build > + functions provided by the SMBIOS table generator and called by the > + Table Manager to build an SMBIOS table. > + > + @param [in] Generator Pointer to the SMBIOS table generator. > + @param [in] SmbiosTableInfo Pointer to the SMBIOS table information. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol interface. > + @param [out] Table Pointer to the generated SMBIOS table. > + > + @return EFI_SUCCESS If the table is generated successfully or other > + failure codes as returned by the generator. > +**/ > +typedef EFI_STATUS (*SMBIOS_TABLE_GENERATOR_BUILD_TABLEEX) ( > + IN CONST SMBIOS_TABLE_GENERATOR *Generator, > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CM_STD_OBJ_SMBIOS_TABLE_INFO *CONST SmbiosTableInfo, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + OUT SMBIOS_STRUCTURE ***Table, > + OUT CM_OBJECT_TOKEN **CmObjectToken, > + OUT UINTN *CONST TableCount > + ); > + > +/** This function pointer describes the interface to used by the > + Table Manager to give the generator an opportunity to free > + any resources allocated for building the SMBIOS table. > + > + @param [in] Generator Pointer to the SMBIOS table generator. > + @param [in] SmbiosTableInfo Pointer to the SMBIOS table information. > + @param [in] CfgMgrProtocol Pointer to the Configuration Manager > + Protocol interface. > + @param [in] Table Pointer to the generated SMBIOS table. > + > + @return EFI_SUCCESS If freed successfully or other failure codes > + as returned by the generator. > +**/ > +typedef EFI_STATUS (*SMBIOS_TABLE_GENERATOR_FREE_TABLEEX) ( > + IN CONST SMBIOS_TABLE_GENERATOR *Generator, > + IN CONST EDKII_DYNAMIC_TABLE_FACTORY_PROTOCOL *CONST TableFactoryProtocol, > + IN CONST CM_STD_OBJ_SMBIOS_TABLE_INFO *CONST SmbiosTableInfo, > + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL *CONST CfgMgrProtocol, > + IN SMBIOS_STRUCTURE ***Table, > + IN CM_OBJECT_TOKEN **CmObjectToken, > + IN CONST UINTN TableCount > + ); > + > +/** This function pointer describes the interface to used by the > + Table Manager to give the generator an opportunity to add > + an SMBIOS Handle. > + > + This function is called by the Dynamic Table Manager to add a newly added > + SMBIOS Table OR it can be called by an SMBIOS Table generator to create > + and add a new SMBIOS Handle if there is a reference to another table and > + if there is a generator for that table that hasn't been called yet. > + > + @param [in] Smbios Pointer to the SMBIOS protocol. > + @param [in] SmbiosHandle Pointer to an SMBIOS handle (either generated by > + SmbiosDxe Driver or SMBIOS_HANDLE_PI_RESERVED > + if a handle needs to be generated). > + @param [in] CmObjectToken The CM Object token for that is used to generate > + SMBIOS record. > + @param [in] SmbiosId The SMBIOS table generator Id. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_OUT_OF_RESOURCES Unable to add the handle. > + @retval EFI_NOT_FOUND The requested generator is not found > + in the list of registered generators. > +**/ > +typedef EFI_STATUS (*EDKII_DYNAMIC_TABLE_FACTORY_SMBIOS_TABLE_ADD_HANDLE) ( > + IN EFI_SMBIOS_PROTOCOL *Smbios, > + IN SMBIOS_HANDLE *SmbiosHandle, > + IN CM_OBJECT_TOKEN CmObjectToken, > + IN ESTD_SMBIOS_TABLE_ID SmbiosId > + ); > + > +/** This function pointer describes the interface to used by the > + Table Manager to give the generator an opportunity to find > + an SMBIOS Handle. > + > + This function is called by the SMBIOS table generator to find an SMBIOS > + handle needed as part of generating an SMBIOS Table. > + > + @param [in] CmObjectToken The CM Object token used to generate the SMBIOS > + record. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_NOT_FOUND The requested generator is not found > + in the list of registered generators. > +**/ > +typedef SMBIOS_HANDLE_MAP * (*EDKII_DYNAMIC_TABLE_FACTORY_SMBIOS_TABLE_GET_HANDLE) ( > + IN CM_OBJECT_TOKEN CmObjectToken > + ); > + > /** The SMBIOS_TABLE_GENERATOR structure provides an interface that the > Table Manager can use to invoke the functions to build SMBIOS tables. > */ > @@ -189,6 +294,14 @@ typedef struct SmbiosTableGenerator { > allocated for building the SMBIOS table. > */ > SMBIOS_TABLE_GENERATOR_FREE_TABLE FreeTableResources; > + > + /// SMBIOS table extended build function pointer. > + SMBIOS_TABLE_GENERATOR_BUILD_TABLEEX BuildSmbiosTableEx; > + > + /** The function to free any resources > + allocated for building the SMBIOS table. > + */ > + SMBIOS_TABLE_GENERATOR_FREE_TABLEEX FreeTableResourcesEx; > } SMBIOS_TABLE_GENERATOR; > > /** Register SMBIOS table factory generator. > @@ -229,6 +342,54 @@ DeregisterSmbiosTableGenerator ( > IN CONST SMBIOS_TABLE_GENERATOR *CONST Generator > ); > > +/** Add SMBIOS Handle. > + > + This function is called by the Dynamic Table Manager to add a newly added > + SMBIOS Table OR it can be called by an SMBIOS Table generator to create > + and add a new SMBIOS Handle if there is a reference to another table and > + if there is a generator for that table that hasn't been called yet. > + > + @param [in] Smbios Pointer to the SMBIOS protocol. > + @param [in] SmbiosHandle Pointer to an SMBIOS handle (either generated by > + SmbiosDxe Driver or SMBIOS_HANDLE_PI_RESERVED > + if a handle needs to be generated). > + @param [in] CmObjectToken The CM Object token for that is used to generate > + SMBIOS record. > + @param [in] SmbiosId The SMBIOS table generator Id. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_OUT_OF_RESOURCES Unable to add the handle. > + @retval EFI_NOT_FOUND The requested generator is not found > + in the list of registered generators. > +**/ > +EFI_STATUS > +EFIAPI > +AddSmbiosHandle ( > + IN EFI_SMBIOS_PROTOCOL *Smbios, > + IN SMBIOS_HANDLE *SmbiosHandle, > + IN CM_OBJECT_TOKEN CmObjectToken, > + IN ESTD_SMBIOS_TABLE_ID SmbiosId > + ); > + > +/** Find SMBIOS Handle given the CM Object token used to generate the SMBIOS > + record.. > + > + This function is called by the SMBIOS table generator to find an SMBIOS > + handle needed as part of generating an SMBIOS Table. > + > + @param [in] CmObjectToken The CM Object token used to generate the SMBIOS > + record. > + > + @retval EFI_SUCCESS Success. > + @retval EFI_NOT_FOUND The requested generator is not found > + in the list of registered generators. > +**/ > +SMBIOS_HANDLE_MAP * > +EFIAPI > +FindSmbiosHandle ( > + IN CM_OBJECT_TOKEN CmObjectToken > + ); > + > #pragma pack() > > #endif // SMBIOS_TABLE_GENERATOR_H_