Re: [edk2-devel] EDK2 environment setup

[<Navdeeppal.Singh@dell.com>]

Thank you.
Able to build Emulator pkg after adding VS2019 build options.
Regards,
Navdeep

-----Original Message-----
From: Leif Lindholm <leif@nuviainc.com> 
Sent: Tuesday, April 28, 2020 3:18 PM
To: devel@edk2.groups.io; guomin.jiang@intel.com
Cc: Singh, Navdeeppal; spbrogan@outlook.com; sean.brogan@microsoft.com; Bret.Barkelew@microsoft.com; jim.slaughter@sage-micro.com
Subject: Re: [edk2-devel] EDK2 environment setup


[EXTERNAL EMAIL] 

My bad, was checking on a different computer than I thought where the
edk2 checkout wasn't up to date. Still, gives me a way to close out the stackoverflow question, so thanks :)

/
    Leif

On Tue, Apr 28, 2020 at 09:35:22 +0000, Guomin Jiang wrote:
> It is known issue and can refer https://bugzilla.tianocore.org/show_bug.cgi?id=2637 for detail.
> 
> It have been fixed in newest repository, you can update to the newest repository and try again.
> 
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of 
> Navdeeppal.Singh@dell.com
> Sent: Tuesday, April 28, 2020 5:15 PM
> To: spbrogan@outlook.com; devel@edk2.groups.io; 
> sean.brogan@microsoft.com; Bret.Barkelew@microsoft.com; 
> jim.slaughter@sage-micro.com
> Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
> 
> 
> Hi,
> 
> Yes I am using edksetup.bat.
> 
> I was able to fix VFR compiler after making path changes.
> 
> And I was able to build MdeModulePkg Successfully.
> 
> But while building Emulator Pkg. I see the following Linker Error. Do I need to build some other module before building Emulator Pkg.
> 
> 
> 
> [cid:image001.jpg@01D61D83.5E9F0750]
> 
> 
> 
> Regards,
> 
> Navdeep
> 
> -----Original Message-----
> From: Sean Brogan <spbrogan@outlook.com<mailto:spbrogan@outlook.com>>
> Sent: Tuesday, April 28, 2020 2:28 AM
> To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Singh, 
> Navdeeppal; 
> sean.brogan@microsoft.com<mailto:sean.brogan@microsoft.com>; 
> Bret.Barkelew@microsoft.com<mailto:Bret.Barkelew@microsoft.com>; 
> jim.slaughter@sage-micro.com<mailto:jim.slaughter@sage-micro.com>
> Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
> 
> 
> 
> 
> 
> [EXTERNAL EMAIL]
> 
> 
> 
> Are you using edksetup.bat?  I would have expected this code to set the path for you.
> 
> https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat#
> L134
> 
>   So without more logs i don't know.
> 
> 
> 
> 
> 
> 
> 
> If you want to use "stuart" (my preferred method) I have a commit here for EmulatorPkg which has a platformbuild.py and readme.md that describes the process.  This should be committed to edk2 master this week to enable Platform CI for every PR.
> 
> 
> 
> Here is the readme and details.
> 
> https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtE
> mulatorPackages_v10/EmulatorPkg/PlatformCI
> 
> 
> 
> Here is the commit you should cherry-pick if you want to try it.
> 
> 
> 
> https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd
> 76f068d0a2
> 
> 
> 
> 
> 
> 
> 
> Thanks
> 
> Sean
> 
> 
> 
> 
> 
> 
> 
> On 4/27/2020 1:26 AM, Navdeeppal.Singh@dell.com<mailto:Navdeeppal.Singh@dell.com> wrote:
> 
> > Hi,
> 
> >
> 
> > Thanks for your help.
> 
> >
> 
> > I am to build base tools and able to generate bin files.
> 
> >
> 
> > "Build" command is generated.
> 
> >
> 
> > Later, I am trying to build "EmulatorPkg".
> 
> >
> 
> > And running into VfrCompile error.
> 
> >
> 
> > 'VfrCompile' is not recognized as an internal or external command,
> 
> >
> 
> > operable program or batch file.
> 
> >
> 
> > NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1'
> 
> >
> 
> > Stop.
> 
> >
> 
> > 'VfrCompile' is not recognized as an internal or external command,
> 
> >
> 
> > operable program or batch file.
> 
> >
> 
> > I can see VfrCompile.exe generated in "BaseTools".
> 
> >
> 
> > Attached build log for "Emulator Pkg".
> 
> >
> 
> > I tried checking the Env Paths .
> 
> >
> 
> > Regards,
> 
> >
> 
> > Navdeep
> 
> >
> 
> > *From:* Sean Brogan 
> > <sean.brogan@microsoft.com<mailto:sean.brogan@microsoft.com>>
> 
> > *Sent:* Friday, April 24, 2020 12:33 AM
> 
> > *To:* devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Singh, 
> > Navdeeppal; Bret Barkelew;
> 
> > jim.slaughter@sage-micro.com<mailto:jim.slaughter@sage-micro.com>
> 
> > *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
> 
> >
> 
> > [EXTERNAL EMAIL]
> 
> >
> 
> > Navdeep,
> 
> >
> 
> > Yes since the 202002 stable tag there have been submodules 
> > introduced
> 
> > to the basetools.  If you look closely you will see in the CI 
> > process
> 
> > this required a change where stuart_setup is run before calling
> 
> > edk2toolsbuild.py.
> 
> >
> 
> > https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb
> > 36
> 
> > 8080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1
> 
> >
> 
> > If you are using "stuart" to build then that is the suggested path 
> > as
> 
> > stuar_setup will init your submodules listed in the 
> > RequiredSubmodules
> 
> > (https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136).
> 
> > Given that the edk2 project and ecosystem has numerous ways to setup
> 
> > your environment and build, you can also just make sure your 
> > workspace
> 
> > is complete prior to running Edk2ToolsBuild.py.  In this case you 
> > only
> 
> > need to run "git submodule update --init"
> 
> >
> 
> > I just did this and it works fine with VS2019.
> 
> >
> 
> > Jim,
> 
> >
> 
> > Just as fyi as I know there are lots of reasons for toolchain selection.
> 
> >
> 
> > I believe the Visual studio build tools are available free of charge
> 
> > (not the IDE but the compilers).   Directions here.
> 
> > https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual
> > -s
> 
> > tudio-2019-preferred
> 
> >
> 
> > Thanks
> 
> >
> 
> > Sean
> 
> >
> 
> > *From:* devel@edk2.groups.io<mailto:devel@edk2.groups.io> 
> > <mailto:devel@edk2.groups.io>
> 
> > <devel@edk2.groups.io 
> > <mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%20%3cmailto
> > :devel@edk2.groups.io>>> *On Behalf Of
> 
> > *Navdeeppal.Singh via groups.io
> 
> > *Sent:* Thursday, April 23, 2020 9:14 AM
> 
> > *To:* Bret Barkelew <Bret.Barkelew@microsoft.com
> 
> > <mailto:Bret.Barkelew@microsoft.com>>; 
> > devel@edk2.groups.io<mailto:devel@edk2.groups.io>
> 
> > <mailto:devel@edk2.groups.io>
> 
> > *Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
> 
> >
> 
> > Hi Bret,
> 
> >
> 
> > Yes PIP requirements are up to date.
> 
> >
> 
> > On further digging through the logging file BASETOOLS_BUILD.txt.
> 
> >
> 
> > INFO - subprocess not exit successfully
> 
> >
> 
> > INFO - Error while execute command 'nmake all' in direcotry
> 
> > C:\edk2\BaseTools\Source\C\BrotliCompress
> 
> >
> 
> > Regards,
> 
> >
> 
> > Navdeep
> 
> >
> 
> > *From:* Bret Barkelew <Bret.Barkelew@microsoft.com
> 
> > <mailto:Bret.Barkelew@microsoft.com>>
> 
> > *Sent:* Thursday, April 23, 2020 9:37 PM
> 
> > *To:* devel@edk2.groups.io<mailto:devel@edk2.groups.io> 
> > <mailto:devel@edk2.groups.io>; Singh,
> 
> > Navdeeppal
> 
> > *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
> 
> >
> 
> > [EXTERNAL EMAIL]
> 
> >
> 
> > Have you installed the up-to-date Python requirements? "pip install
> 
> > -upgrade -r pip-requirements.txt"?
> 
> >
> 
> > That's the first thing I would check. Otherwise, happy to look at 
> > the
> 
> > problem with you.
> 
> >
> 
> > - Bret
> 
> >
> 
> > *From: *NAVDEEPPAL_SINGH via groups.io
> 
> > <mailto:NAVDEEPPAL_SINGH=DELL.COM@groups.io>
> 
> > *Sent: *Thursday, April 23, 2020 6:05 AM
> 
> > *To: *devel@edk2.groups.io<mailto:*devel@edk2.groups.io> 
> > <mailto:devel@edk2.groups.io>
> 
> > *Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup
> 
> >
> 
> > I am trying to setup EDK2 environment setup from Tianocore/EDK2.
> 
> > While doing the Base Tool setup. After running
> 
> > BaseTool/EDK2ToolsBuild.py -t VS2019 Getting following error :-
> 
> > c:\edk2\BaseTools>python Edk2ToolsBuild.py  -t VS2019 SECTION - Init
> 
> > SDE SECTION - Loading Plugins SECTION - Start Invocable Tool 
> > Traceback
> 
> > (most recent call last):
> 
> >    File "Edk2ToolsBuild.py", line 177, in <module>
> 
> >      main()
> 
> >    File "Edk2ToolsBuild.py", line 173, in main
> 
> >      Edk2ToolsBuild().Invoke()
> 
> >    File "C:\Program
> 
> > Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable
> > .p
> 
> > y", line 141, in Invoke
> 
> >      retcode = self.Go()
> 
> >    File "Edk2ToolsBuild.py", line 139, in Go
> 
> >      raise Exception("Failed to build.")
> 
> > Exception: Failed to build.
> 
> >
> 
> > set EDK_TOOLS_PATH=C:\edk2\BaseTools
> 
> > set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32
> 
> > Can some one help
> 
> >
> 
> 
> 
>