public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
* How to switch SMBus/I2c bus number in EDK2?
@ 2022-09-06 11:09 gordontcp
  2022-09-06 12:41 ` [edk2-devel] " Pedro Falcato
  0 siblings, 1 reply; 2+ messages in thread
From: gordontcp @ 2022-09-06 11:09 UTC (permalink / raw)
  To: devel

[-- Attachment #1: Type: text/plain, Size: 1124 bytes --]

Hi all,
My platform information is as follows:
Minnowboard Max.
I use i2cdetect under Linux to detect multiple I2c buses, such as:

I2c-0 Synopsys DesignWare I2C adapter
I2c-10 SMBus I801 adapter at 2000

I can scan the I2c-10 SMbus slave address 0x50 from the SpdRead code in the UEFI shell to have a slave device. Methods as below:

UINT32 FindSmBusDev()
{
...
Addr = 0x80000000;
for(Bus = 0x00; Bus < 0xFF; Bus++) {
for(Dev = 0x00; Dev <= 0x1F; Dev++) {
 for(Fun = 0x00; Fun <= 0x07; Fun++) {
  Addr &= 0xFF000000;//clean the address
  Addr |= ((Bus << 16) | (Dev << 11) | (Fun << 8));//set the pci bus dev and fun IoWrite32(PCI_INDEX_IO_PORT, Addr);
 if(IoRead32(PCI_DATA_IO_PORT) != 0xFFFFFFFF) {
    Addr = Addr + 0x08;//read class code
   IoWrite32(PCI_INDEX_IO_PORT, Addr);
   if (IoRead32(PCI_DATA_IO_PORT) >> 16 == 0x0C05)//it's Smbus class code
   {
      return Addr - 0x08;
   }
  }
 }
}
}
return Addr;
}

My question is:
How to switch to I2c-0 bus under UEFI to perform I2C IO operation on the slave device of Synopsys I2C controller?
Any suggestion is greatly appreciated!

[-- Attachment #2: Type: text/html, Size: 4495 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [edk2-devel] How to switch SMBus/I2c bus number in EDK2?
  2022-09-06 11:09 How to switch SMBus/I2c bus number in EDK2? gordontcp
@ 2022-09-06 12:41 ` Pedro Falcato
  0 siblings, 0 replies; 2+ messages in thread
From: Pedro Falcato @ 2022-09-06 12:41 UTC (permalink / raw)
  To: edk2-devel-groups-io, gordontcp

[-- Attachment #1: Type: text/plain, Size: 1403 bytes --]

Hi,


You're assuming every i2c bus appears as a PCI device - that's not always
the case. In fact, those Synopsys devices usually arent (AFAIK).

Thanks,
Pedro

On Tue, 6 Sept 2022, 12:09 , <gordontcp@gmail.com> wrote:

> Hi all,
> My platform information is as follows:
> Minnowboard Max.
> I use i2cdetect under Linux to detect multiple I2c buses, such as:
>
> I2c-0 Synopsys DesignWare I2C adapter
> I2c-10 SMBus I801 adapter at 2000
>
> I can scan the I2c-10 SMbus slave address 0x50 from the SpdRead code in
> the UEFI shell to have a slave device. Methods as below:
>
> UINT32 FindSmBusDev()
> {
> ...
> Addr = 0x80000000;
> for(Bus = 0x00; Bus < 0xFF; Bus++) {
>  for(Dev = 0x00; Dev <= 0x1F; Dev++) {
>   for(Fun = 0x00; Fun <= 0x07; Fun++) {
>    Addr &= 0xFF000000;//clean the address
>    Addr |= ((Bus << 16) | (Dev << 11) | (Fun << 8));//set the pci bus dev and fun IoWrite32(PCI_INDEX_IO_PORT, Addr);
>   if(IoRead32(PCI_DATA_IO_PORT) != 0xFFFFFFFF) {
>      Addr = Addr + 0x08;//read class code
>     IoWrite32(PCI_INDEX_IO_PORT, Addr);
>     if (IoRead32(PCI_DATA_IO_PORT) >> 16 == 0x0C05)//it's Smbus class code
>     {
>        return Addr - 0x08;
>     }
>    }
>   }
>  }
> }
> return Addr;
> }
>
>
>
> My question is:
> How to switch to I2c-0 bus under UEFI to perform I2C IO operation on the
> slave device of Synopsys I2C controller?
> Any suggestion is greatly appreciated!
> 
>

[-- Attachment #2: Type: text/html, Size: 4603 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-09-06 12:41 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-09-06 11:09 How to switch SMBus/I2c bus number in EDK2? gordontcp
2022-09-06 12:41 ` [edk2-devel] " Pedro Falcato

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox