[PATCH] ArmVirtPkg: Various typo

[PATCH] ArmVirtPkg: Various typo

[Antoine Coeur]

Various typo in ArmVirtPkg.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
---
 ArmVirtPkg/ArmVirt.dsc.inc                                  | 2 +-
 ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c                | 2 +-
 ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c | 4 ++--
 .../FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c      | 6 +++---
 .../Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c   | 6 +++---
 ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c      | 4 ++--
 6 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
index c47955be94..304a4b4d21 100644
--- a/ArmVirtPkg/ArmVirt.dsc.inc
+++ b/ArmVirtPkg/ArmVirt.dsc.inc
@@ -333,7 +333,7 @@
   # Values are in EFI Pages (4K). DXE Core will make sure that
   # at least this much of each type of memory can be allocated
   # from a single memory range. This way you only end up with
-  # maximum of two fragements for each type in the memory map
+  # maximum of two fragments for each type in the memory map
   # (the memory used, and the free memory that was prereserved
   # but not used).
   #
diff --git a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
index 73a0fbd8a4..758bc91ab1 100644
--- a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
+++ b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
@@ -1,5 +1,5 @@
 /** @file
-  HOB Library implemenation for Dxe Phase with DebugLib dependency removed
+  HOB Library implementation for Dxe Phase with DebugLib dependency removed
 
 Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
 Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
diff --git a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
index 6479f53b37..a083826bab 100644
--- a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
+++ b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
@@ -1238,7 +1238,7 @@ PciExpressBitFieldAndThenOr32 (
   Size into the buffer specified by Buffer. This function only allows the PCI
   configuration registers from a single PCI function to be read. Size is
   returned. When possible 32-bit PCI configuration read cycles are used to read
-  from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+  from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
   and 16-bit PCI configuration read cycles may be used at the beginning and the
   end of the range.
 
@@ -1338,7 +1338,7 @@ PciExpressReadBuffer (
   Size from the buffer specified by Buffer. This function only allows the PCI
   configuration registers from a single PCI function to be written. Size is
   returned. When possible 32-bit PCI configuration write cycles are used to
-  write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+  write from StartAddress to StartAddress + Size. Due to alignment restrictions,
   8-bit and 16-bit PCI configuration write cycles may be used at the beginning
   and the end of the range.
 
diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
index f0924dacbc..16c0e61816 100644
--- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
+++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
@@ -234,13 +234,13 @@ SerialPortGetControl (
 }
 
 /**
-  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
   data bits, and stop bits on a serial device.
 
   @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
                             device's default interface speed.
                             On output, the value actually set.
-  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
+  @param ReceiveFifoDepth   The requested depth of the FIFO on the receive side of the
                             serial interface. A ReceiveFifoDepth value of 0 will use
                             the device's default FIFO depth.
                             On output, the value actually set.
@@ -253,7 +253,7 @@ SerialPortGetControl (
                             DefaultParity will use the device's default parity value.
                             On output, the value actually set.
   @param DataBits           The number of data bits to use on the serial device. A DataBits
-                            vaule of 0 will use the device's default data bit setting.
+                            value of 0 will use the device's default data bit setting.
                             On output, the value actually set.
   @param StopBits           The number of stop bits to use on this serial device. A StopBits
                             value of DefaultStopBits will use the device's default number of
diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
index 8b736fd11f..2f10fb7b91 100644
--- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
+++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
@@ -156,13 +156,13 @@ SerialPortPoll (
 }
 
 /**
-  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
   data bits, and stop bits on a serial device.
 
   @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
                             device's default interface speed.
                             On output, the value actually set.
-  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
+  @param ReceiveFifoDepth   The requested depth of the FIFO on the receive side of the
                             serial interface. A ReceiveFifoDepth value of 0 will use
                             the device's default FIFO depth.
                             On output, the value actually set.
@@ -175,7 +175,7 @@ SerialPortPoll (
                             DefaultParity will use the device's default parity value.
                             On output, the value actually set.
   @param DataBits           The number of data bits to use on the serial device. A DataBits
-                            vaule of 0 will use the device's default data bit setting.
+                            value of 0 will use the device's default data bit setting.
                             On output, the value actually set.
   @param StopBits           The number of stop bits to use on this serial device. A StopBits
                             value of DefaultStopBits will use the device's default number of
diff --git a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
index bb07f5e22b..534357eff4 100644
--- a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
+++ b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
@@ -779,11 +779,11 @@ PlatformBootManagerBeforeConsole (
   Do the platform specific action after the console is ready
   Possible things that can be done in PlatformBootManagerAfterConsole:
   > Console post action:
-    > Dynamically switch output mode from 100x31 to 80x25 for certain senarino
+    > Dynamically switch output mode from 100x31 to 80x25 for certain scenario
     > Signal console ready platform customized event
   > Run diagnostics like memory testing
   > Connect certain devices
-  > Dispatch aditional option roms
+  > Dispatch additional option roms
   > Special boot: e.g.: USB boot, enter UI
 **/
 VOID
-- 
2.17.2 (Apple Git-113)